Dimensions (In.) Max. Ins. Color Code Red Blue.155
|
|
|
- Georgiana Cain
- 5 years ago
- Views:
Transcription
1 REEL SMRT Termination System Disconnects DNG Courtesy of Steven Engineering, Inc. 230 Ryan ay, South San Francisco, C, Main Office: (650) Outside Local rea: (800) SUPR-GRIP Disconnects Integrated Metal Insulation Grip DNG18-187FB-3K DNG18-188FB-3K DNG18-250FB-3K DNG14-187FB-3K DNG14-188FB-3K DNG14-250FB-3K ire Red.128 Blue.155 In. (mm) X.032 (4.7 X.8) X.020 (4.7 X.5) X.032 (4.7 X.8) X.020 (4.7 X.5) X 0.32 C9 C-800 Pieces CD9-15 CD CD9-16 CD PNDUIT SUPR-GRIP fully pre-insulated disconnects offer a funnel entry metal insulation grip that provides superior insulation pullout performance. FETURES: Integrated metal insulation grip to meet double crimp requirements Funnel entry design eases wire insertion -coded insulation Internal wire barrel serrations for maximum crimp tensile strength Tin plated brass stamping Oversized wire stop Rated at 600V and 125 C (257 F) operating temperature. PNDUIT SUPR-GRIP Disconnects are shown in the following applications: The Integrated Metal Insulation Grip of SUPR-GRIP Disconnects provides superior Insulation Strain Relief for tight spacing applications. SUP R -GRIP Disconnects are also used where a Double Crimp is specifically required. 20
2 Courtesy of Steven Engineering, Inc. 230 Ryan ay, South San Francisco, C, Main Office: (650) Outside Local rea: (800) FETURES: The DISCO-L OK Disconnect s Positive Locking Mechanism provides the lowest insertion force of any locking disconnect in the market for easy assembly. It also provides a secure, high strength, locking connection to a mating NEM/UL male tab with through hole. Vibration and tension on the crimped wire will not cause the mated connection to separate. hen disassembly is required, a simple pull on the fully insulated nylon housing will easily release the disconnect from its mating male tab. REEL SMRT Termination System DISCO-LOK Disconnects Positive Locking Mechanism Integrated Metal Insulation Grip ire DNG18-250FL-3K Red DNG14-250FL-3K Blue PNDUIT DISCO-LOK Fully Insulated Disconnects have the following Locking Feature: 1. I nstall female disconnect onto male tab In. (mm) C9 C-800 CD9-14 CD CD9-14 CD DIS CO-LOK is the world s only pre-assembled, fully insulated, positive locking disconnect receptacle. Ideal for high vibration applications where ease of insertion is important and security of connection is mandatory. These features provide benefits to all markets. Pre-assembled eliminates labor intensive secondar y post insulation required with other manufacturer s products Fully pre-insulated construction Integrated funnel entry metal insulation grip Tin plated brass stamping Rated at 300V and 125 C (257 F) operating temperature. 1. Pull both wires - the locking mechanism stays locked 2. The through hole in the male tab interfaces with the locking mechanism 2. Pull DISCO-LOK housing -- the lock releases 3. Connection separates 3. ithdrawal force on the insulator housing releases the locking mechanism, allowing separation of the connection Disconnects DNG 21
3 REEL SMRT Termination System Female Disconnects DNF Courtesy of Steven Engineering, Inc. 230 Ryan ay, South San Francisco, C, Main Office: (650) Outside Local rea: (800) Female Disconnects, Fully Insulated, Nylon Insulation Support Internal ire Stop Standard Receptacle ousings *UL/ CS standards do not exist for.110" X.010" receptacles. **UL with 17 G vacuum cleaner wire. Expanded ire Entry rea for Large ire Insulation O.D. Standard Receptacle ousings i re DNF18-110FIB-3K Red DNF18-111FIB-3K * DNF18-112FIB-3K Natural DNF18-187FIB-3K DNF18-188FIB-3K DNF18-205FIB-3K.016 Red DNF18-206FIB-3K ** DNF18-250FIB-3K DNF14-187FIB-3K DNF14-188FIB-3K DNF14-205FIB-3K.016 Blue DNF14-206FIB-3K DNF14-250FIB-3K DNF10-250FIB-2K DNF18205FIBX-2K Yellow DNF18206FIBX-2K.016 Red. 210 DNF18250FIBX-2K DNF14205FIBX-2K DNF14206FIBX-2K.016 Blue. 240 DNF14250FIBX-2K Bulk Carton available. 8K = 8,000 pieces per carton. Bulk Carton available. 12K = 12,000 pieces per carton..110 X. 032 (2.8 X.8).110 X. 020 (2.8 X.5).110 X. 010 (2.8 X.3).187 X X X X. 020 C9 CD9-7 CD9-4 CD9-5 C-800 Ser ies CD CD CD CD9-13B CD CD9-6B CD9-8B CE RTIFIE D CD CD
4 Courtesy of Steven Engineering, Inc. 230 Ryan ay, South San Francisco, C, Main Office: (650) Outside Local rea: (800) X REEL SMRT Termination System Right ngle, Fully Insulated, Female Disconnects, Nylon Insulation Support ** DNFR18205FIB-KD ir e Barrel Insulated, Female Disconnects, Vinyl Plastic Insulation Crimp Internal ire Stop X ** DNFR18206FIB-KD.018 Red.178 ** DNFR18250FIB-KD ** DNFR14205FIB-KD ** DNFR14206FIB-KD.018 Blue.178 ** DNFR14250FIB-KD **Bulk Carton available. 6K = 6,000 pieces per carton..205 X X X X.020 C9 Crimp CD9-9C CD9-9C C-800 CD CD * * * Except DV K C9 C-800 ire Seri es DV18-187B-3K X.032 DV18-188B-3K X.020 DV18-205B-3K.205 X Red.160 CD9-1 CD DV18-206B-3K.205 X.020 ** DV18-250B-3K DV14-187B-3K X DV14-188B-3K X.020 DV14-205B-3K.016 Blue DV14-206B-3K X X.020 (4.5/5.2 X.5) CD9-2 CD DV14-250B-3K DV K x.032 (6.3 x.8) DV10-250C-2K.018 Ye llow CD9-3B CD (6.4 X.8) Compression tab disconnect to fit.250" tabs with a post style support. **Bulk Carton available. 12K = 12,000 pieces per carton. Female Disconnects DNFR & DV 23
5 REEL SMRT Termination System Male Disconnects DNF & DV Courtesy of Steven Engineering, Inc. 230 Ryan ay, South San Francisco, C, Main Office: (650) Outside Local rea: (800) Fully Insulated, Male Disconnects, Nylon Insulation Support Internal ire Stop Barrel Insulated, Male Disconnects Internal ire Stop Part Nu mber Standard ousing ire ire DNF18-250FIM-2K Red DNF14-250FIM-2K Blue Oversized ousing Dim ensions Vinyl Insulated Plastic Insulation Crimp Tab S ize DV18-250MB-3K Red DV14-250MB-3K Blue DV10-250MB-2K Yellow Nylon Insulated Metal Insulation Grip Sleeve DNF18-250M-3K Red DNF14-250M-3K Blue DNF10-250M-2K Yellow Tab S iz e.250 x.032 (6.3 x.8).250 x.032 (6.3 x.8) * DNF18-250FIMB-K Red * DNF14-250FIMB-K Blue DNF10-250FIMB-K Yellow Standard ousing Expanded ire Entry rea DNF18250FIMX-2K Red DNF14250FIMX-2K Blue *To mate with other manufacturers fully insulated Female Receptacles. Expanded wire entry area for large wire insulation O.D. and dual wire applications. (6.3X.8) * C9 Crimp C-800 Crimp CE RTIFIE D* *DNF18-250M-3K C9 C-800 Crimp CD9-4B CD CD9-5B CD CD9-4B CD CD9-5B CD CD9-18B CD CD9-8B CD CD9-8B CD CD9-1 CD CD9-2 CD CD9-3B CD CD9-1 CD CD9-2 CD CD9-3B CD
6 Courtesy of Steven Engineering, Inc. 230 Ryan ay, South San Francisco, C, Main Office: (650) Outside Local rea: (800) * * *Except DPF18-188FIB-3K and DPF14-188FIB-3K. DISC OG RI P Fully Insulated, Male Disconnects REEL SMRT Termination System DISCOGRIP Fully Insulated, Female Disconnects Standard Receptacle ousings PREMIUM GRDE NYLON OUSING PROVIDES INSULTION CRIMP FOR SUPERIOR IRE INSULTION STRIN RELIEF For applications experiencing high vibration or conductor strain. Internal ire Stop Part Nu mber ire DPF18-110FIB-3K Red.132 DPF18-111FIB-3K DPF18-187FIB-3K DPF18-188FIB-3K DPF18-205FIB-3K.016 Red DPF18-206FIB-3K DPF18-250FIB-3K DPF14-187FIB-3K DPF14-188FIB-3K DPF14-205FIB-3K.016 Blue DPF14-206FIB-3K DPF14-250FIB-3K DPF10-250FIB-2K.016 Standard ousing Yellow DPF18-250FIM-2K Red DPF14-250FIM-2K Blue Oversized ousing * DPF18-250FIMB-K Red * DPF14-250FIMB-K Blue *To mate with other manufacturers fully insulated Female Receptacles. Bulk carton available. 12K = 12,000 pieces per carton..110 X.032 (2.8 X.8).110 X.020 (2.8 X.5).187 X X X.032 (4.8/5.2X.8).205 X.020 (4.8/5.2X.5).187 X X X.032 (4.8/5.2X.8).205 X.020 (4.8/5.2X.5) ;;;; ;;;; ;; ;;;; Cross Section of DISCOGRIP Crimp Showing Insulation Crimp of the ire Insulation C9 CD9-12 CD9-10 CD9-11 C-800 Crimp CD CD CD Pieces CD9-13B CD CD9-10B CD CD9-11B CD CD9-10B CD CD9-11B CD Female Disconnects DPF 25
TERMINAL CLASSIFICATION OF PRODUCTS GENERAL INFORMATION
CLASSIFICATION OF PRODUCTS VINYL(PVC) or NYLON INSULATED TERMINALS WITH INSULATION GRIP SLEEVE (Funnel & Non-Funnel Entry types) This 3-piece design terminal provides a permanently attached tin plated
CATALOG. Sta-Kon Power, connection & control Wire termination & insulation
CTLOG Sta-Kon Power, connection & control Wire termination & insulation Thomas & etts is now Installation Products, but our long legacy of quality products and innovation remains the same. From connectors
3 Terminals, Kits and Tools
3 Terminals, Kits and Tools Glossary of Product Terminology 2 Terminals 6 For more than 30 years, 3M has been a leading supplier of Scotchlok terminals, disconnects, connectors and tools for use in the
3 Terminals, Kits and Tools
3 Terminals, Kits and Tools Glossary of Product Terminology 2 Terminals 5 Butt onnectors 5 Disconnects 11 Female 11 Male 17 Multi-Stack 22 Ring Tongue Terminals 23 For more than 30 years, 3M has been a
K SERIES PUSH ON & BULLET TERMINALS
Industrial products we wholesale, you distribute K SERIES PUSH ON & BULLET TERMINALS NYLON INSULATED PUSH ON TERMINALS VINYL INSULATED PIGGY BACK PUSH ON TERMINALS NYLON FULLY INSULATED BULLET TERMINALS
DIMENSIONS DIMENSIONS PKG. WIRE MAX. BOLT REC. STOCK PKG. WIRE MAX. BOLT REC. STOCK CAT. NO. QTY. RANGE INS. HOLE TOOL
Ring Terminals Sta-Kon Rings, Forks and Locking Forks omplete line of installing tools engineered to match tool with terminal First to gain military approval for pressure connections many styles available
Terminals, Kits and Tools
Terminals, Kits and Tools Glossary of Terminals and Tools Terms 48 Ring Tongues 53 Multi- Ring Tongues 78 Standard Forks 79 Block Forks 85 Flanged Block Forks 93 ocking Forks 98 Butt onnectors 107 Female
TECHNICAL INFORMATION
S ECTION Solderless Terminal Construction/Technical Information...-2 Numbering System...-4 Decimal Equivalent Chart...-5 Wire Gauge Conversion...-5 Stud Size Chart...-6 Ring Terminals...-7, 10, 12 Spade
Terminal Products and Tools
Terminal Products and Tools Terminals Overview...2-5 Nylon Insulated Ring...6-10 Vinyl Insulated Ring...11-12, 18 Non-Insulated Ring...13-15 Heavy Duty Ring...16 High Temperature Non-Insulated...17 TEFZEL
Small Terminals BURNDY
B-14 TYPES T AND YAD HYLUG Uninsulated Compression Terminal, Ring Tongue The Type T uninsulated terminals are constructed of pure electrolytic copper. Designed a long brazed seam barrel, standard neck,
Insulated Crimp Terminals
CONTENTS PVC Insulated ring terminals 3 PVC insulated spade terminals 3 PVC insulated pin terminals 4 PVC insulated blade terminals 4 PVC insulated butt connectors 4 PVC insulated female disconnectors
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
HALOGEN FREE INSULATED TERMINALS P PP
1 HALOGEN FREE INSULATED TERMINALS P PP blade terminals The P range of terminals has been designed, to meet the increasing demands for improved safety and reliability of electrical connectors. The Polycarbonate
Delphi Harsh Environment Series (HES) Connection Systems
Receptacle Plastic w/ Male Terminals Dephi St. No. Deutsch PN (Receptacle Plastic w/ Male Terminals) Plug Plastic w/ Female Terminals Dephi St. No. Deutsch PN (Plug Plastic w/ Female Terminals) # of cavities
Sta-Kon s Long Barrel Design
Terminals Why Sta-Kon Terminals Are Better Like any other value added manufacturing process, using the best material is only a start. Our Sta- Kon terminals are all manufactured with the customer in mind,
Terminals, Kits and Tools
Terminals, Kits and Tools Glossary of Terminals and Tools Terms 48 Ring Tongues 53 Multi- Ring Tongues 78 Standard Forks 79 Block Forks 85 Flanged Block Forks 93 ocking Forks 98 Butt onnectors 107 Female
Straight Blade Plugs and Connectors
Plugs and Connectors Industrial, Commercial and Residential rade Leviton offers a complete line of 2-, 3-, and 4-wire straight blade plugs ands connectors that resist impact, corrosion and chemicals. The
Delphi Harsh Environment Series (HES) Connection Systems
Receptacle Plastic w/ Male Terminals Waytek Stock No. Deutsch PN (Receptacle Plastic w/ Male Terminals) Plug Plastic w/ Female Terminals Waytek Stock No. Deutsch PN (Plug Plastic w/ # of Female Terminals)
web:
web: CONTENTS INTRODUCTION 00 CU LUGS 00 TERMINALS 00 HEAT SHRINKABLES 00 CABLE TIES 00 CABLE MARKERS 00 GLANDS 00 CLEATS 00 PVC TAPES 00 INTRODUCTION Aftec Electrical Solutions Aftec international with
EPIC Pin & Sleeve Connectors EPIC
EPIC 1 Courtesy of Steven Engineering, Inc.-20 Ryan Way, South San Francisco, CA 080-0-Main Office: (0) 88-200-Outside Local Area: (800) 28-200-www.stevenengineering.com Global Power Connectors for the
Easy assembly with standard tools. Fully insulated for direct mounting to steel panels
Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series and Receptacles are the proven industry standard
D-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
023_quick splice_vinyl. Terminals & Cable Ties
023_quick splice_vinyl Terminals & Cable Ties Terminals As a trusted brand, Panduit provides solutions that will stay strong for a wide range of general purpose applications and outlast the competition.
20 AMP. 20-2P&G Plugs and Connectors
20 AMP 20-2P&G Plugs and Connectors - Rated 20A., 125V. / 15A., 250V. ac - Non-melting thermo-set molded phenolic construction. - Ergonomic shape for ease of handling - Enough space in body to wire for
Coaxial Snap-Lock Connectors
Coaxial Snap-Lock Connectors Application Specification 114-13010 11 APR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
G R E E N L I T E. c a b l e a c c e s s o r y c o r p o r a t i o n
G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n GT Nylon Cable Ties 4 GT Nylon Cable Ties - Color 5 GS Screw-Mount
TCI5125 Dusttight Grip " 1.50"NPT Ins
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 TCI5125 Dusttight Grip 1.20-1.50" 1.50"NPT Ins Eaton Wiring Devices Catalog Number Manufacturer Description Weight per
Scotchlok Terminals, Kits and Tools
3 Scotchlok Terminals, Kits and Tools Terminals pg. 39 Butt onnectors pg. 42 Disconnects Female pg. 45 Male pg. 53 Multi-Stack pg. 57 Ring Tongue Terminals pg. 58 Flag pg. 76 Multi-Stud pg. 77 Fork Terminals
Cable connection technology
Around the cable Cable connection technology Insulated crimp terminals... convincing solutions The Quality The elimination of every need to weld complicated operations to effect an electrical connection,
General characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
Wire Mesh Safety Grips
Wire esh Safety Grips Leviton are built tough to provide the strength, reliability and gripping force required for today s demanding wire management applications. They are designed to distribute stress
2/3 Port Mechanical Valve. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Mass (Basic)
2/3 Port Mechanical Valve Series 00 Large flow capacity. A variety of actuator types. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Mass (Basic)
Hubbell Marine Isolation Transformers 15 kva and 25 kva Models
Shore Power System 15 kva and 25 kva Models Protects Sensitive Equipment on Board Virtually Eliminates Potential for In-Water Stray Current Can be wired per ABYC E-11 for either a Polarization or Isolation
Miniature Fittings Stainless Steel 316. Hose nipple. Barb Configuration for easy insertion into the tube Holds the tube tightly.
Miniature Fittings Stainless Steel 316 Series MS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose nipple
Termco Lugs and Terminals
Termco Lugs and Terminals Copper Crimp Lugs and Links Pre- and Uninsulated Terminals and Connectors www.hesales.com.au Termco Lugs and Terminals Copper Lugs & HD Terminals All Termco Heavy Duty Copper
Water-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
Good for ABS applications. Temperature rating -87ºF to 150ºF (-66ºC to 66ºC) Temperature rating -87ºF to 150ºF (-66ºC to 66ºC)
ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details 16-125 Replacement 30-9620 15, with PERMAPLUGS 30-9621 15, with zinc die-cast plugs 30-9624 15, with (Quick-Connect Plugs) 30-9920 15,
Sealed Sensor Connector (SSC) System
Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal
Washdown Industrial/Light Marine UniGuard
Safety, Performance and Durability in a Snap! Beverage Plants Construction Sites Food Processing Marine and Shipboard Pulp and Paper Mills Chemical Plants Extensive Product Family Safe and reliable, portable
Tube Applicable for nylon, soft nylon and polyurethane tubing.
Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
Cable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
MMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
AMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
Single pole connectors
Cam-Lok J-Series E1016 receptacles Cable Size #6 AWG 250 MCM 600V AC/DC, Up to 400A Continuous NEMA 3R J-Series E1016, elastomeric, threaded stud Double cam principle provides a positive, vibration-proof
Power cable accessories catalogue
Power cable accessories catalogue Cable Lugs and Connectors Renewables A brighter future Jointing Tech is a specialist electrical distributor supplying a full range of power cable and accessories into
Contents. Connectors - Crimp Terminals. Page
Farnell Page 249 Date: 17-08-0 time:21:21 Contents Page Bootlace Ferrules 250 Insulated Crimp Terminals - Imperial 21 Insulated Crimp Terminals - Metric 253 Non Insulated Crimp Terminals 22 Non Insulated
Series SY3000/5000/7000
Type1P Type2P 5 Port Solenoid Valve ase Mounted Manifold ar Stock Type/Flat Ribbon Cable Series /5000/000 How to Order Manifold Type 1P/Compact style SS5Y 5 1P 05 C8 Manifold series 3 5, port size Thread
Plug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.
Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck
Mini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
Termination Products. Table of Contents
Table of Contents Overview.... B2 B5 Ring Terminals... B6 B15 Flag Terminals... B16 Fork Terminals...B17 B20 Pin Terminals...B21 Butt Splices... B22 B23 Joints... B24 B25 Heat-Shrinkable Terminals, Splices
Cam-Lok Single Pole Connectivity. The industry standard for reliable service under the most severe operating conditions.
Cam-Lok Single Pole Connectivity The industry standard for reliable service under the most severe operating conditions. Cam-Lok Single Pole Connectivity Cam-Lok connectors are the industry standard Cam-Lok
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Power cable accessories catalogue
Power cable accessories catalogue Cable Lugs and Connectors Renewables A brighter future Jointing Tech is a specialist electrical distributor supplying a full range of power cable and accessories into
APPLICATION SPECIFICATION
1.0 SCOPE This specification covers the requirements for the application of Mega-Fit 5.70 mm pitch wire to board connector systems. 2.0 PRODUCT NAME AND SERIES NUMBERS Mega-Fit Female Crimp Terminal 76823
HelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
Fax: PO Box 100, 2222 Moore Rd. Jonesville, MI
1-800-447-3150 Fax: 1-517-849-9516 PO Box 100, 2222 Moore Rd. Jonesville, MI 49250 www.hillsdaleterminal.com INDEX Adapters...12 Battery & Welding Cable...17 Battery Terminals...16 Bullet Connectors...10
The Pushbutton Series
The The includes two separate enclosure designs, an in-line style and a multi-hole style configuration. oth are designed from fiberglass reinforced polyester and feature a continuous polyurethane gasket
Delphi Harsh Environment Series (HES) Connection Systems
The Delphi Harsh Environment Series (HES) include circular connectors, terminals, and a J1939 diagnostic circular connector. The 24 shell size industry standard connector includes six terminal configurations
FLEET ESSENTIALS QUICK REFERENCE GUIDE Fax Burke Street, Santa Fe Springs, CA 90670
WE MAKE PRODUCTS THAT MAKE A DIFFERENCE FLEET ESSENTIALS QUICK REFERENCE GUIDE For new and innovative products, visit www.phillipsind.com (B-FE-ENG) 9-26-16 12070 Burke Street, Santa Fe Springs, CA 90670
Heavy-Duty Top Post Terminals Fits 6 to 1 gauge cables. Heavy-Duty Top Post Epoxy Coated Terminals
1 6 7 5 4 3 2 1 Fits positive or negative posts 2 Bolt locks firmly from left to right side 3 Lead Alloy 4 Steel inserts avoid stripping 5 Universal Holds cable or strap 6 Removable plate for easy assembly
WE MAKE PRODUCTS THAT MAKE A DIFFERENCE 12070 Burke Street Santa Fe Springs, CA 90670 Fax: 800-597-7757 B-FE-0509 www.phillipsind.com ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details
Cam-Lok Single Pole Connectors
Cam-Lok Single Pole Connectors Cooper Interconnect Cam-Lok Single Pole Connectors are specially designed to provide the ultimate in reliable service, even under the most severe operating conditions. These
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
PUSH ON, QUICK DISCONNECT & BULLET TERMINALS
Industrial products we wholesale, you distribute PUSH ON, QUICK DISCONNECT & BUET TERMINAS NON-INSUATED PUSH ON TERMINAS VINY INSUATED PUSH ON TERMINAS NYON FUY INSUATED QUICK DISCONNECT TERMINAS NYON
8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
VINYL SOLDERLESS TERMINALS
VINYL SOLDERLESS TERMINALS 22-18 WIRE RANGE - RED Vinyl Insulated, Funnel Entry 395010 Stud Size #4-#6 00 395020 Stud Size #8-#10 00 395120 Stud Size #4-#6 00 395171 Box 500 395130 Stud Size #8-#10 00
1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
/ CABLE TIES & WIRE FASTENERS /
Standard Self-locking Cable Ties information INFO Melting point: 265 C (509 F) Brittleness temperature: -112 C (-169 F) at 2% water Provide up to 50% more tensile strength and 15% larger bundle diameters
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
M40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
SECTION SECTION. EATON 2014 Arrow Hart Buyers Guide
F SECTION SECTION 1 EATON 2014 Arrow Hart Buyers Guide FSECTION Cam-lok Single Pole Connectivity Table of contents Product selector guide F-3 NEMA rating system F-4 F-series F-5 E1010 F-6 E1012 F-7 F-series
20A & 30A IEC 309 Watertight pin & sleeve devices
AH430R7W AH430C7W IP69K certified AH430P7W Product Description - North American 20A & 30A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve plugs features & benefits
Specifications Valve. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
Finger Valve Series VHK ohs Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing
Engineered installation products Solutions for control panel applications
Engineered installation products Solutions for control panel applications 2 Engineered installation products Solutions for control panel applications Solutions for control panel applications ABB introduces
Kellems Wire Management Products
Section V Kellems Wire anagement Products Index Product Page Kellems Wire esh Grips Diagram..................................V-2 Quick Reference Selection Guide for Grip Applications.................V-4
CABLE GRIPS Strain-Relief Grips Pulling Grips Support Grips
Tough and dependable, Woodhead cable grips and cord grip bodies are reliable workhorses in any plant environment. They serve as flexible holding devices used to pull cable, rope, or tubing into place,
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
C A B L E C O N N E C T O R S
Quality in connection! Elematic Cabling Systems offers a large and complete range of crimping terminals, lugs and terminal blocks to satisfy the most different connection requirements in the widest application
VR A 3W 4P Receptacle. Long Description. Manufacturer Information. Taxonomies, Classifications, and Categories
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Descriptions Description Long Description Product
STRATO-THERM Terminals and Splices for High Temperature Applications
atalog 1308940 Introduction Product Facts Product available in temperature ranges of 500 F [260 ], 550 F [288 ], 650 F [343 ] and 1200 F [649 ] Product employs the famous and crimp ide range of wire sizes
SMALL TERMINALS TABLE OF CONTENTS
BURNDY Products Small Terminals SMALL TERMINALS TABLE OF CONTENTS B-1 General Information............ B-2, B-3 MIL. SPEC. Equivalent Tables........ B-4 Types T & YAD.................... B-5 Types TP &
SECTION SECTION SECTION EATON 2016 Arrow Hart Buyers Guide
F SECTION SECTION SECTION 1 EATON 2016 Arrow Hart Buyers Guide www.arrowhart.com /arrowhart FSECTION Cam-Lok Single Pole Connectivity Table of contents Product selector guide F-3 NEMA rating system F-4
PLASTI-GRIP* Terminals and Splices
PLASTI-GRIP* s and Splices Application Specification 114-2161 29 MAR 16 Rev G All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
16A & 32A IEC 309 Watertight pin & sleeve devices
Technical Data IEC 309 Product Description - International ; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding AH416R6W AH416C6W AH416P6W Pin & sleeve plugs features & benefits
16 - Swivels & Joining Links
16 - Swivels & Joining inks Quicklinks - Stainless Stainless "C" inks 316 grade stainless steel. n alternative to shackles or snaps allowing quick entry via a threaded hexagon locking nut. S 1 R S S..
Cam-Lok. Single pole connectivity. The industry standard for reliable service under the most severe operating conditions.
Plugs & receptacles Cam-Lok single pole connectivity Cam-Lok Single pole connectivity The industry standard for reliable service under the most severe operating conditions. Cam-Lok single pole connectivity
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
CATENARY ACCESSORIES INSTRUCTIONS. Power Management. Quick Connect Voltage Separation Box AY-QCVSB. Sheet 5. Suspension Accessories
CATENARY ACCESSORIES INSTRUCTIONS Quick Connect Jumper Cord AY-QC7P6-X Sheet 2 Quick Connectors AY-QC7SET Sheet 3 3/32" Stainless Steel Cable AY-CBL3/32-50 Power Cord AY-P6-50 Power Cord Ties AY-WT-100
Insert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly
Insert Fittings Series KF A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials Tube grip (resin sleeve) Tube
A-M COPPER TUBE CRIMPING LUGS. for copper conductors. A-M series lugs are manufactured
A-M COPPER TUBE CRIMPING LUGS for copper conductors A-M series lugs are manufactured from electrolytic copper tube. The dimensions of the tube are designed to obtain the most efficient electrical conductivity
EPIC. Pin & Sleeve Connectors PIN & SLEEVE CONNECTORS
PIN & SLEEVE CONNECTORS Reference Pin & Sleeve Overview 461 Pin & Sleeve Products Overview 462 CEE series, MULTIMAX series, ULYSSE series, ALUPRES series Pin & Sleeve Construction 464 MULTIMAX Installation
2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example
Coupling nut Plugshell O-Ring O-Ring Cable clamp 2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example Shell ring Plugshell O-ring: Shell: The Plugshell O-Ring is designed to help to maintain
Low Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
Thermal-Magnetic Circuit Breaker 201/-WA
Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring
3 Port Solenoid Valve
Port Solenoid Valve Series VQ00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, C 9080-0-Main Office: (0) 88-900-Outside Local rea: (800) 8-900-www.stevenengineering.com Outstandingly
Fog Misting System. Misting systems have been used in outdoor cooling applications for decades. These systems can provide outdoor cooling
Aquashi have teamed up with Fogco USA to provide you with one of the best mist and fog systems available in the market today. Fogco is a manufacturer of high pressure mist and fog systems for industrial,
How to Order. Nozzle. Nil Connection size N02 N03 F02 F H06 H08 H10 H07 H09 H11
Blow Gun RoHS How to Order VMG W Blow gun Standard type Series Resin body lever type W BU Piping entry Bottom Top Body color White ark blue Symbol Nil 3 4 3 3 4 3 3 33 34 Male High efficiency Low noise
Wire to Board Insulation Displacement Connectors (1/5)
Wire to Board Insulation Displacement Connectors (1/5) XSR 0.6mm pitch - IDC style 0.2A 30V SUR 0.8mm pitch - IDC style, Compact, Low-profile 0.5A (AWG#32) 0.2A (AWG#36) 30V This is the world's smallest