3 Terminals, Kits and Tools

Transcription

1 3 Terminals, Kits and Tools Glossary of Product Terminology 2 Terminals 5 Butt onnectors 5 Disconnects 11 Female 11 Male 17 Multi-Stack 22 Ring Tongue Terminals 23 For more than 30 years, 3M has been a leading supplier of Scotchlok terminals, disconnects, connectors and tools for use in the assembly and maintenance of electrical systems. Thousands of satisfied customers know our products for effective and reliable performance, being U isted and SA ertified, where appropriate; a variety of types, sizes and materials meeting a broad application range, including the demands of temperature and weather; design features assuring easy installation of 3M products positive and easy wire insertion, elimination of strand hang-ups and wire twisting, and easy insulation entry. These are a few of the characteristics that make the installer s job easier. Fork Terminals 48 Block 48 Flanged Block 53 ocking 57 Standard 63 Heavy-Duty 67 Hook Tongue 68 Specials 71 Kits 74 Tools Terminals, Kits and Tools? Frequently Asked Questions hat does the insulation grip do? The insulation grip provides a second crimp on the wire insulation. It provides additional wire strain relief. It s excellent for high-vibration applications. hich 3M tools can I use with 3M terminals? The handy reference guide on pages gives you a variety of choices of tools to use with 3M terminals. hat s the difference between insulated and fully-insulated disconnects? hat temperatures do 3M terminals withstand? Insulated disconnects have barrel insulation only, and fullyinsulated disconnects are insulated from the barrel to the receptacle/tab. Non-insulated 3M terminals withstand temperatures up to 347 F (175 ). Insulated 3M terminals withstand temperatures up to 221 F (105 ). 1

2 Phone 800/ Fax 800/ Glossary of Product Terminology Adapters - To interconnect two connectors already attached to wires. Block Fork - Designed to use in terminal block because sides lie flat against barrier portion of terminal block. Bullet Style - Similar advantages as disconnects but are rounded. Gives reliable in-line connection because parts are made to have holding friction when joined. Usually for automotive use. Butt - Uses chamfered barrel ends to provide fast, easy wire insertion from both ends and a built-in wire stop for correct positioning. Must be crimped at both ends. losed-nd - Used in situations requiring pigtail of two or more wires. Flanged Fork - Gives the benefit of both the block and locking forks. Stays secure should screw loosen. Has tipped-up ends. Fork - Allows rapid connection of wire. Usually used on free-standing studs. Heavy-Duty - Products of heavier than normal gauge material. ommonly used by railroads. Hook - ombines the security of the ring with the convenience of the forks. ocking Fork - The spring-like tongue locks in place around the stud even when mount screw is not tightened. xtra force is required to remove from stud. Parallel - Similar to butt with overlapped wires and single crimp in center of connector. Used where space is limited. Pins - For installation in compression blocks. Used in urope for terminating stranded wire. Quick onnect (Disconnect) - Attached to mating part by tongue of female part slipping over male tab. Use of dents and rolled edges on female part provides excellent holding force, while allowing easy and quick disconnect. They are flat. Ring - The standard style of tongue; the safest and most reliable. It cannot be removed unless mounting screw is removed. Tab - Uses mounting hole for rivet or screw. Tap - No wire stripping is necessary; just lay wire in connector and crimp. onnection is made. 3- and 4-ay - One connector used to connect three or four different wires. 2

3 Standard Terminal onstruction Vinyl Insulated 9 3M Terminals provide a variety of design features assuring consistently effective, reliable performance and easy installation. Please refer to the illustrations at the numbered locations for the attributes described below. 1. One-piece, burr-free construction provides maximum electrical conductivity. lectrical bright-tin plating gives maximum corrosion resistance. Annealing relieves stress points and assures maximum installed strength. 2. Barrel-to-pad transition design minimizes flexing and bending. 3. Open-end design permits visual inspection of wire location before and after crimping. 4. hold on wire comes from multiple V grooves in #26-4 AG parts, resulting in excellent current flow. 5. Injection-molded insulations on terminals are the highest quality in the industry. 221 F (105 ) rated, tough, resistant electrical grade materials Molding ensures consistent wall thickness for maximum reliability after crimping Molding allows funnel barrel construction for easier installation Molding offers the crimp ridge and non-slip ridge 6. rimp ridge designed for positive location of tool on terminal barrel, resulting in few miscrimps. 7. Funnel barrel construction provides: Positive, easy wire insertion No hang-ups of wire strands ire twisting not necessary 8. Nylon-insulated terminals, with grip, feature a brass sleeve. Sleeve provides optimum grip on insulation, strain relief and vibration protection. Brass sleeve is recessed, which provides excellent flash-over protection. 9. Non-slip ridge so tool slides to correct position for a proper crimp and better workmanship. 10.Beveled leading edge for easy wire insulation entry Nylon Insulated with Insulation Grip Barrel Styles Non-insulated butted seam The most economical terminal, it is used where special performance or installation characteristics are not needed. Beveled mouth facilitates wire insertion. temperature for bare terminals: 347 F (175 ). Non-insulated brazed seam Beveled mouth facilitates wire insertion. an be crimped anywhere on barrel surface. Silver brazed seam will not open under crimping pressure or operating stresses. Unlike butted seam parts, stranded wire cannot escape barrel confines during, or after, crimping. temperature for bare terminals: 347 F (175 ). Vinyl insulated brazed and butted seams Used where insulated barrel is necessary and desirable. Terminal consists of brazed or butted part with flared, rigid molded polyvinyl chloride sleeve, securely attached and funneled for easy wire entry. ire insulation positions itself against funnel portion of vinyl sleeve, eliminating strand hang-up. rimping barrel and flared portion of sleeve provide excellent electrical contact plus mechanical stress relief at junction of insulation and barrel. Insulation has a non-slip ridge for ease of positioning crimping tool. Industry standard color coding indicates wire range. Insulators are rated at a continuous operating temperature range from -40 F to 221 F (-40 to 105 ). U isted and SA ertified for 600V building wire and 1,000V signs and lighting fixtures (luminaries). Nylon insulated butted seam with insulation grip Used where insulated barrel and positive insulation grip are necessary or desirable. Terminal consists of butted seam part with flared, seamless brass sleeve securely attached and covered with flared, molded nylon sleeve. ire insulation positions itself against funnel portion of brass sleeve. rimping barrel and flared portion of sleeve provide excellent electrical contact plus mechanical stress relief at junction of insulation and barrel. Positioning crimp tool is nearly mistake proof due to a step in nylon insulation. Industry standard color coding indicates wire range. Insulators are rated at a continuous operating temperature range from -40 F to 221 F (-40 to 105 ). U isted and SA ertified for 600V building wire and 1,000V signs and lighting fixtures (luminaries). 3 Terminals, Kits and Tools 3

4 Phone 800/ Fax 800/ Installation Procedure Funnel Barrel Feature provides an excellent electrical and mechanical connection. Funnel design guides wire into position. No wire strand hang-up as the wire is inserted, giving a fast, positive installation. ire is in place, ready for crimping. For maximum crimping performance, barrel of connector must be properly indexed in the crimp tool station. orrect crimping is important to assure a strong connection Insulated Terminals and onnectors: lectrical rimp Mechanical rimp Non-Insulated Terminals and onnectors: Indent should be opposite the barrel seam. orrect Incorrect Heat Shrink Terminals, onnectors and Disconnects 3M Heat Shrink pre-insulated terminals, connectors and disconnects protect against the most challenging of environments, making the best moisture protection available. They offer several advantages over conventional unsealed products. orrosion Resistance The adhesive-lined heat shrink material, when properly crimped and shrunk, provides a seal that is resistant to water, salt, steam and other related contaminants. Improved Mechanical Performance The adhesivelined heat shrink tubing adheres, when shrunk, to both the connector and the wire insulation, providing improved pullout strength and strain relief. Durable Heat Shrink Tubing Tough heat shrink tubing effectively resists abrasion, scoring, cut-through, and the effects of long term aging. Versatile and asy to Use 3M heat shrink terminals, splices and disconnects are available in wire sizes AG, and can be installed easily with a recommended tool and heat source. The connectors are color-coded for wire range identification, and the transparent tubing allows for visual inspection. High Temperature Terminals and onnectors 3M high temperature terminals and connectors are constructed of steel with a nickel plating. Their temperature rating for continuous use at 900 F (482 ) makes them perfect for use in ovens, motors, light fixtures and other applications where other connectors would corrode or melt. There is no applicable U or SA standard for high temperature steel parts. Application Procedure for Heat Shrink Products: 1. Strip wires to appropriate length as indicated on package label. 2. Insert wire into terminal and crimp with correct station of a recommended tool. 3. Apply heat with a recommended heat source. Standard rimp Terminal and onnector Specifications Materials rimp terminals and connectors are to be burr-free, annealed and bright-tin plated TP copper. Barrels shall be 0.25" long with brazed seams where specified. Insulation grip sleeves are to be tin-plated brass and attached securely to the barrel. Terminal insulators are to be molded polyvinyl chloride or nylon, U isted and SA ertified for 600V in building wire and 1,000V in signs and lighting fixtures (luminaries). onnector insulators are to be extruded polyvinyl chloride or nylon with a temperature rating of 221 F (105 ). onstruction All insulated terminals are to have funnel entry construction to prevent strand hang-up and a crimp ridge for proper tool location. Nylon insulated terminals and connectors are to have butted seam barrels with insulation grip sleeves. All terminal barrels are to have multiple V grooves for maximum conductor retention. Dimension Key idth learance ength Stud Size Barrel I.D. Barrel ength Note: All dimensions are measured in inches. Insulation Diameter

5 Non-Insulated Brazed Seam Butt onnectors Product UP ire Range Barrel Barrel Number ( ) (AG) Thickness ength I.D ire Range Nylon Insulated Seamless Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 61-SN SN SN SN 62-SN 63-SN ire Range Nylon Insulated with Insulation Grip Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 60-NB* NB NB NB *Not U isted or SA ertified 3 Terminals, Kits and Tools Butt onnectors 60-NB 61-NB 62-NB 63-NB ire Range Nylon Insulated with Insulation Grip, Moisture-Resistant Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 61-NBM NBM NBM Note: onnectors are filled with moisture-resistant grease 61-NBM 62-NBM 63-NBM ire Range

6 Phone 800/ Fax 800/ Vinyl Insulated Brazed Seam Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 64-P P P P 65-P 66-P ire Range Vinyl Insulated Butted Seam Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 61-P P P P P 62-P 63-P ire Range Vinyl Insulated Seamless Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 61-SP SP SP SP 62-SP 63-SP ire Range

7 Vinyl Insulated Butted Seam Parallel onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 91-P P P P 92-P 93-P ire Range Non-Insulated Seamless Parallel onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 92-S S S 93-S ire Range Non-Insulated Butted Seam Parallel onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter Terminals, Kits and Tools Butt onnectors ire Range

8 Phone 800/ Fax 800/ Non-Insulated Brazed Seam Parallel onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter ire Range Vinyl Insulated Brazed Seam Parallel onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 94-P P P P 95-P 96-P ire Range Recommended Stranded ire ombinations 91 and 91P 1 #22 to 1 #22, 20, 18, 16 1 #20 to 1 #20, 18, 16 1 #18 to 1 #18 Min. MA: 1280, Max. MA: S 1 #18 to 1 #18, 16, 14, 12, 10 1 #16 to 1 #16, 14, 12, 10 1 #14 to 1 #14, 12, 10 1 #12 to 1 #12 Min. MA: 3240, Max. MA: and 96-P 1 #12 to 1 #12, 10, 8, 6, 4 1 #10 to 1 #10, 8, 6, 4 1 #8 to 1 #8, 6 Min. MA: 13060, Max. MA: , 92-S and 92-P 1 #22 to 1 #22, 20, 18, 16, 14 1 #20 to 1 #20, 18, 16, 14 1 #18 to 1 #18, 16, 14 1 #16 to 1 #16 Min. MA: 1280, Max. MA: and 94-P 1 # 18 to 1 #18, 16, 14, 12, 10, 8 1 #16 to 1 #16, 14, 12, 10, 8 1 #14 to 1 #14, 12, 10, 8 1 #12 to 1 #12, 10 Min. MA: 3240, Max. MA: Parallel onnectors Proper ire Insertion 93 and 93-P 1 #18 to 1 #18, 16, 14, 12, 10 1 #16 to 1 #16, 14, 12, 10 1 #14 to 1 #14, 12 Min. MA: 3240, Max. MA: and 95-P 1 #14 to 1 #14, 12, 10, 8, 6 1 #12 to 1 #12, 10, 8, 6 1 #10 to 1 #10, 8, 6 1 #8 to 1 #8 Min. MA: 8220, Max. MA:

9 Vinyl Insulated Butted Seam 3-ay onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 322-P P P P 316-P 312-P ire Range Nylon Insulated with Insulation Grip 3-ay onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 322-NB NB NB Terminals, Kits and Tools Butt onnectors 322-NB 316-NB 312-NB ire Range

10 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam 4-ay onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 422-P P P P 416-P 412-P ire Range Nylon Insulated with Insulation Grip 4-ay onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 422-NB NB NB NB 416-NB 412-NB ire Range

11 Heat Shrink Nylon Fully-Insulated Female Disconnects Mates with ire Male Tab Product UP Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness D ength I.D. MNHU18-250DFIX* x MNHU18-250DFIK* x MNHU14-250DFIX* x MNHU14-250DFIK* x MNHU10-250DFIX x MNHU10-250DFIK x *indowless receptacle D MNHU18-250DFI MNHU14-250DFI MNHU10-250DFI ire Range High-Temperature Butted Seam Female Disconnects 900 F (482 ) Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D. HT-72F x HT-72F x Terminals, Kits and Tools Disconnects HT-72F HT-72F ire Range High-Temperature Butted Seam Female Flag Disconnect 900 F (482 ) Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D. HT x HT ire Range

12 Phone 800/ Fax 800/ Non-Insulated Butted Seam Female Disconnects Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D. 70F * x F * x F x F x F x F x F x F x F * x * Not U isted or SA ertified 70F F F F F F F ire Range

13 Non-Insulated Butted Seam Female Disconnect Flag Terminals Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D * x * x x x x * Not U isted or SA ertified ire Range Vinyl Insulated Butted Seam Female Disconnects Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter 71F P x F P x F P* x F P x F P x F P x F P* x * Not U isted or SA ertified 3 Terminals, Kits and Tools Disconnects 71F P 71F P 72F P 72F P 72F P 73F P ire Range

14 Phone 800/ Fax 800/ Nylon Insulated with Insulation Grip Female Disconnects Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter 70F NB* x F NB* x F NB x F NB x F NB* x F NB x F NB x F NB x F NB* x * Not U isted or SA ertified 70F NB 70F NB 71F NB 71F NB 72F NB 72F NB 72F NB ire Range F NB ire Range

15 Fully Nylon Insulated Butted Seam Female Disconnects Mates with ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness D ength I.D. Diameter 70F N* x x F N x F N x F N x F N x F N x * Not U isted or SA ertified D Stud Size 70F N 71F N 71F N 72F N 72F N ire Range Stud Size 73F N ire Range Terminals, Kits and Tools Disconnects 15

16 Phone 800/ Fax 800/ Fully Nylon Insulated with Insulation Grip Female Disconnects Mates with ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness D ength I.D. Diameter 70F NB* x F NB x F NB x F NB x F NB x F NB x * Not U isted or SA ertified D Stud Size 70F NB 71F NB 71F NB 72F NB 72F NB ire Range Stud Size 73F NB ire Range Nylon Insulated Butted Seam Bullet Style Female Disconnects ire Mating Snap Product UP Range Diameter Barrel Barrel Insulation Number ( ) (AG) S ength I.D. Diameter 81F-156-N F-180-N F-156-N F-180-N S S S S 81F-156-N 81F-180-N 82F-156-N 82F-180-N ire Range

17 Nylon Insulated with Insulation Grip Bullet Style Female Disconnects ire Mating Snap Product UP Range Diameter Barrel Barrel Insulation Number ( ) (AG) S ength I.D. Diameter 81F-156-NB F-180-NB F-156-NB F-180-NB F-156-NB 81F-180-NB 82F-156-NB 82F-180-NB ire Range Heat Shrink Nylon Fully-Insulated Butted Seam Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness D ength I.D. MNHU18-250DMIX x MNHU18-250DMIK x MNHU14-250DMIX x MNHU14-250DMIK x MNHU10-250DMIX x MNHU10-250DMIK x D S S S S 3 Terminals, Kits and Tools Disconnects MNHU18-250DMI MNHU14-250DMI MNHU10-250DMI ire Range High-Temperature Butted Seam Male Disconnects 900 F (482 ) ire Male Tab Product UP Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D. HT-72M x HT-72M x HT-72M HT-72M ire Range

18 Phone 800/ Fax 800/ Non-Insulated Butted Seam Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D. 71M x M x M x M x M x M M M M M ire Range Vinyl Insulated Butted Seam Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter 71M P x M P x M P x M P x M P x M P 71M P 72M P 72M P 73M P ire Range Nylon Insulated with Insulation Grip Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter 71M NB x M NB x M NB x M NB x M NB x M NB 71M NB 72M NB 72M NB 73M NB ire Range

19 Fully Nylon Insulated Butted Seam Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness D ength I.D. Diameter 71M N x M N x M N x M N x M N x M N mates with 71F N 71M N mates with 71F N 72M N mates with 72F N 72M N mates with 72F N 73M N mates with 73F N D 71M N 71M N 72M N 72M N 73M N ire Range Fully Nylon Insulated with Insulation Grip Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness D ength I.D. Diameter 71M NB x M NB x M NB x M NB x M NB x M NB mates with 71F NB 71M NB mates with 71F NB 72M NB mates with 72F NB 72M NB mates with 72F NB 73M NB mates with 73F NB 3 Terminals, Kits and Tools Disconnects D 71M NB 71M NB 72M NB 72M NB 73M NB ire Range

20 Phone 800/ Fax 800/ Self-Mating ross-ock Disconnect Non-Insulated Butted Seam ire Product UP Range Barrel Barrel Number ( ) (AG) ength I.D ire Range Self-Mating ross-ock Disconnect Vinyl Insulated Butted Seam ire Product UP Range Barrel Barrel Insulation Number ( ) (AG) ength I.D. Diameter 761-P P P P 762-P 763-P ire Range Self-Mating ross-ock Disconnect Nylon Insulated with Insulation Grip ire Product UP Range Barrel Barrel Insulation Number ( ) (AG) ength I.D. Diameter 761-NB NB NB NB 762-NB 763-NB ire Range

21 Vinyl Insulated Butted Seam Bullet Style Male Disconnects ire Mating Snap Product UP Range Diameter Barrel Barrel Insulation Number ( ) (AG) S ength I.D. Diameter 81M-156-P M-180-P M-156-P M-180-P M-156-P M-156-P mates with 81F-156-N 81M-180-P mates with 81F-180-N 82M-156-P mates with 82F-156-N 82M-180-P mates with 82F-180-N 83M-156-P no Female S S 81M-156-P 81M-180-P 82M-156-P 82M-180-P 83M-156-P ire Range Nylon Insulated with Insulation Grip Bullet Style Male Disconnects ire Mating Snap Product UP Range Diameter Barrel Barrel Insulation Number ( ) (AG) S ength I.D. Diameter 81M-156-NB M-180-NB M-156-NB M-180-NB M-156-NB M-156-NB mates with 81F-156-NB 81M-180-NB mates with 81F-180-NB 82M-156-NB mates with 82F-156-NB 82M-180-NB mates with 82F-180-NB 83M-156-NB no Female S S S 3 Terminals, Kits and Tools Disconnects S S S S S 81M-156-NB 81M-180-NB 82M-156-NB 82M-180-NB 83M-156-NB ire Range

22 Phone 800/ Fax 800/ Butted Seam Bullet Style Male Disconnects ire Mating Product UP Range Snap Diameter Barrel Barrel Number ( ) (AG) S ength I.D. 81M M M M M M M-156 ire Range Nylon Insulated with Insulation Grip Multi-Stack Disconnects Mates with ire Female & Male Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter NB x NB x NB NB ire Range Vinyl Insulated Butted Seam Multi-Stack Disconnects Mates with ire Female & Male Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter P x P x P P ire Range

23 Non-Insulated Butted Seam Multi-Stack Disconnects ire Mating Product UP Range Snap Diameter Barrel Barrel Number ( ) (AG) S ength I.D x x P P ire Range Heat Shrink Brazed Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. MH18-6R/X MH18-6R/K MH18-8R/X MH18-8R/K MH18-10R/K MH18-10R/X MH18-6R/ MH18-8R/ MH18-10R/ Stud Size ire Range Terminals, Kits and Tools Ring Tongues 23

24 Phone 800/ Fax 800/ Heat Shrink Brazed Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. MH14-6R/X MH14-6R/K MH14-8R/X MH14-8R/K MH14-10R/X MH14-10R/K MH14-14R/SX / MH14-14R/SK / MH14-516R/SX / MH14-516R/SK / MH14-38RX / MH14-38RK / MH14-6R/ MH14-8R/S MH14-10R/ MH14-14R/S MH14-516R/S MH14-38R Stud Size /4 10 1/4 ire Range Heat Shrink Brazed Seam Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. MH10-8RX MH10-8RK MH10-10RX MH10-10RK MH10-14RX / MH10-14RK / MH10-38RX / MH10-38RK / MH10-8R MH10-10R MH10-14R MH10-38R Stud Size /4 3/8 ire Range

25 High-Temperature Butted Seam Ring Tongue Terminals 900 F (482 ) Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. HT-11-6S HT HT / HT-12-6S HT HT / HT HT HT / HT / HT-14-14S / HT / HT / HT-11-6S HT HT-12-6S HT HT Stud Size /4 ire Range Terminals, Kits and Tools Ring Tongues HT HT HT-14-14S HT HT Stud Size 10 1/4 1/4 3/8 3/8 ire Range

26 Phone 800/ Fax 800/ Non-Insulated Brazed Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 11-2S S S S S / S / / S- 11-6S S Stud Size /4 3/8 ire Range

27 Non-Insulated Brazed Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 12-2S S S S S / / S / / / S- 12-4S- 12-6S Stud Size ire Range Terminals, Kits and Tools Ring Tongues S S Stud Size /4 5/16 3/8 ire Range

28 Phone 800/ Fax 800/ Non-Insulated Brazed Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 13-4S S S S / / S / / S / / / / S Stud Size ire Range S S S Stud Size 1/4 5/16 3/8 1/2 ire Range

29 Non-Insulated Brazed Seam Ring Tongue Terminals 8 AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D S S / / / S / / S / / S S S- Stud Size 10 1/4 5/16 3/8 1/2 ire Range Non-Insulated Brazed Seam Ring Tongue Terminals 6 AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D S S / / / S / S / / Terminals, Kits and Tools Ring Tongues 15-10S S S- Stud Size 10 1/4 5/16 3/8 1/2 ire Range

30 Phone 800/ Fax 800/ Non-Insulated Brazed Seam Ring Tongue Terminals 4 AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D / / / S / S / S- Stud Size 10 1/4 5/16 3/8 1/2 ire Range Non-Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D Stud Size ire Range

31 Non-Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 11-2S S S S S / S / / S 11-6S S Stud Size /4 3/8 ire Range Terminals, Kits and Tools Ring Tongues 31

32 Phone 800/ Fax 800/ Non-Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 12-2S S S S S / / S / / / S 12-6S 12-8S S Stud Size /4 ire Range

33 Non-Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 13-4S S S S / / S / / S / / / / S S 13-56S Stud Size /4 5/16 ire Range Nylon Insulated Brazed Seam Ring Tongue Terminals 8 AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 14-10S-N (Red) S-N (Red) 1/ N (Red) 5/ N (Red) 3/ S-N (Red) 7/ S-N (Red) 1/ N (Red) 5/ Terminals, Kits and Tools Ring Tongues 14-10S-N 14-14S-N N N S-N Stud Size 10 1/4 5/16 3/8 1/2 ire Range

34 Phone 800/ Fax 800/ Nylon Insulated Brazed Seam Ring Tongue Terminals 6 AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 15-10S-N S-N / N / N / S-N / S-N / N / S-N 15-14S-N N N S-N Stud Size 10 1/4 5/16 3/8 1/2 ire Range Nylon Insulated Brazed Seam Ring Tongue Terminals 4 AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter N N / N / N / S-N / S-N / N N N N S-N Stud Size 10 1/4 5/16 3/8 1/2 ire Range

35 Nylon Insulated with Insulation Grip Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 10-0-NB NB NB NB NB NB NB 10-2-NB 10-4-NB 10-6-NB 10-8-NB NB Stud Size ire Range Nylon Insulated with Insulation Grip Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 11-2S-NB S-NB S-NB NB S-NB NB NB NB NB S-NB / S-NB / NB / Terminals, Kits and Tools Ring Tongues 11-4S-NB 11-6S-NB NB NB 11-14S-NB 11-56S-NB NB Stud Size /4 5/16 3/8 ire Range

36 Phone 800/ Fax 800/ Nylon Insulated with Insulation Grip Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 12-2S-NB S-NB S-NB NB NB S-NB NB NB NB NB S-NB / NB / S-NB / NB / NB / S-NB 12-6S-NB 12-8S-NB 12-8-NB NB Stud Size ire Range NB NB 12-14S-NB 12-56S-NB NB Stud Size /4 5/16 3/8 ire Range

37 Nylon Insulated with Insulation Grip Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 13-4S-NB S-NB NB S-NB NB NB S-NB / NB / S-NB / NB / S-NB / NB / NB / NB / S-NB 13-6-NB 13-8-NB NB Stud Size ire Range Terminals, Kits and Tools Ring Tongues 13-14S-NB 13-56S-NB 13-38S-NB Stud Size 1/4 5/16 3/8 ire Range

38 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 11-2S-P S-P S-P P S-P P P P P S-P / S-P / P / S-P 11-4S-P 11-6S-P P Stud Size ire Range P 11-14S-P 11-56S-P P Stud Size 10 1/4 5/16 3/8 ire Range

39 Vinyl Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 12-2S-P S-P S-P P P S-P P P P P S-P / P / S-P / P / P / S-P 12-6S-P 12-8S-P 12-8-P P Stud Size ire Range Terminals, Kits and Tools Ring Tongues P P P 12-56S-P P Stud Size /45 5/16 3/8 ire Range

40 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 13-4S-P S-P P S-P P P S-P / P / S-P / P / S-P / P / P / P / S-P 13-6-P 13-8-P P Stud Size ire Range S-P, 13-56S-P 13-38S-P Stud Size 1/4 5/16 3/8 ire Range

41 Non-Insulated Ring Type Flag Terminals ire Product UP Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D Stud Size ire Range Terminals, Kits and Tools Ring Tongues 41

42 Phone 800/ Fax 800/ Non-Insulated Butted Seam Multi-Stud Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D , 4, , 8, , 4, , 8, , 8, Stud Size ire Range Non-Insulated Brazed Seam Multi-Stud Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D , 4, , 8, , 4, , 8, , 8, Stud Size ire Range

43 Vinyl Insulated Butted Seam Multi-Stud Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter P , 4, P , 8, P , 4, P , 8, P , 8, P P P Stud Size ire Range Nylon Insulated with Insulation Grip Multi-Stud Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter NB , 4, NB , 8, NB , 4, NB , 8, NB , 8, Terminals, Kits and Tools Ring Tongues NB NB NB Stud Size ire Range

44 Phone 800/ Fax 800/ Heavy-Duty Non-Insulated Butted Seam Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D S S / / / / / Stud Size /4 ire Range Stud Size 5/16 3/8 7/16 1/2 ire Range

45 Heavy-Duty Non-Insulated Brazed Seam Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D S / / / / Stud Size /4 ire Range Stud Size 5/16 3/8 7/16 1/2 ire Range Terminals, Kits and Tools Ring Tongues 45

46 Phone 800/ Fax 800/ Heavy-Duty Vinyl Insulated Butted Seam Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 123-6S-P P S-P P P / P / P / P / P / P P P P Stud Size /4 ire Range P P P P Stud Size 5/16 3/8 7/16 1/2 ire Range

47 Heavy-Duty Nylon Insulated with Insulation Grip Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 123-6S-NB NB S-NB NB NB NB / NB / NB / NB / NB / NB NB NB NB Stud Size /4 ire Range Terminals, Kits and Tools Ring Tongues NB NB NB NB Stud Size 5/16 3/8 7/16 1/2 ire Range

48 Phone 800/ Fax 800/ High-Temperature Butted Seam Block Fork Terminals 900 F (482 ) Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. HT-BS HT-BS HT-BS-31-6 HT-BS-32-6 Stud Size 6 6 ire Range Non-Insulated Brazed Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-31-4S BS-31-6S BS BS BS BS-31-4S- BS-31-6S- BS BS BS Stud Size ire Range Non-Insulated Brazed Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-32-4S BS-32-6S BS BS BS BS-32-4S- BS-32-6S- BS BS BS Stud Size ire Range

49 Non-Insulated Brazed Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS BS BS BS BS BS Stud Size ire Range Non-Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-31-4S BS-31-6S BS BS BS Terminals, Kits and Tools Forks BS-31-4S BS-31-6S BS-31-6 BS-31-8 BS Stud Size ire Range Non-Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-32-4S BS-32-6S BS BS BS BS-32-4S BS-32-6S BS-32-6 BS-32-8 BS Stud Size ire Range

50 Phone 800/ Fax 800/ Non-Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS BS BS BS-33-6 BS-33-8 BS Stud Size ire Range Nylon Insulated with Insulation Grip Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-31-4S-NB BS-31-6S-NB BS-31-6-NB BS-31-8-NB BS NB BS-31-4S-NB BS-31-6S-NB BS-31-6-NB BS-31-8-NB BS NB Stud Size ire Range

51 Nylon Insulated with Insulation Grip Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-32-4S-NB BS-32-6S-NB BS-32-6-NB BS-32-8-NB BS NB BS-32-4S-NB BS-32-6S-NB BS-32-6-NB BS-32-8-NB BS NB Stud Size ire Range Nylon Insulated with Insulation Grip Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-33-6-NB BS-33-8-NB BS NB Terminals, Kits and Tools Forks BS-33-6-NB BS-33-8-NB BS NB Stud Size ire Range

52 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-31-4S-P BS-31-6S-P BS-31-6-P BS-31-8-P BS P BS-31-4S-P BS-31-6S-P BS-31-6-P BS-31-8-P BS P Stud Size ire Range Vinyl Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-32-4S-P BS-32-6S-P BS-32-6-P BS-32-8-P BS P BS-32-4S-P BS-32-6S-P BS-32-6-P BS-32-8-P BS P Stud Size ire Range Vinyl Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-33-6-P BS-33-8-P BS P BS-33-6-P BS-33-8-P BS P Stud Size ire Range

53 Non-Insulated Brazed Seam Flanged Block Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-21-6S BS BS BS BS-22-6S BS BS BS BS BS BS BS BS BS Stud Size ire Range Terminals, Kits and Tools Forks BS BS BS Stud Size ire Range BS BS BS Stud Size ire Range

54 Phone 800/ Fax 800/ Non-Insulated Butted Seam Flanged Block Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-21-6S BS BS BS BS-22-6S BS BS BS BS BS BS BS-21-6 BS-21-8 BS BS-22-6 BS-22-8 BS Stud Size 6, , ire Range BS-23-6 BS-23-8 BS Stud Size ire Range

55 Nylon Insulated with Insulation Grip Flanged Block Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-21-6S-NB BS-21-6-NB BS-21-8-NB BS NB BS-22-6S-NB BS-22-6-NB BS-22-8-NB BS NB BS-23-6-NB BS-23-8-NB BS NB BS-21-6-NB BS-21-8-NB BS NB BS-22-6-NB BS-22-8-NB BS NB Stud Size ire Range Terminals, Kits and Tools Forks BS-23-6-NB BS-23-8-NB BS NB Stud Size ire Range

56 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam Flanged Block Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-21-6S-P BS-21-6-P BS-21-8-P BS P BS-22-6S-P BS-22-6-P BS-22-8-P BS P BS-23-6-P BS-23-8-P BS P BS-21-6-P BS-21-8-P BS P BS-22-6-P BS-22-8-P BS P Stud Size ire Range BS-23-6-P BS-23-8-P BS P Stud Size ire Range

57 Heat Shrink Brazed Seam ocking Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter MH18-6FX MH18-6FK MH18-8FX MH18-8FK MH18-10FX MH18-10FK MH18-6F MH18-8F MH18-10F Stud Size ire Range Heat Shrink Brazed Seam ocking Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter MH14-6FX MH14-6FK MH14-8FX MH14-8FK MH14-10FX MH14-10FK MH14-14FX / MH14-14FK / Terminals, Kits and Tools Forks MH14-6F MH14-8F MH14-10F MH14-14F Stud Size /4 ire Range

58 Phone 800/ Fax 800/ Heat Shrink Brazed Seam ocking Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter MH10-8FX MH10-8FK MH10-10FX MH10-10FK MH10-14FX / MH10-14FK / MH10-8F MH10-10F MH10-14F Stud Size /4 ire Range Non-Insulated Butted Seam ocking Fork Terminals AG ire Max. Product UP Range Stud ock Barrel Barrel Number ( ) (AG) Size idth Thickness ength I.D. SS SS SS SS SS-31-4 SS-31-6 SS-31-8 SS Stud Size ire Range

59 Non-Insulated Butted Seam ocking Fork Terminals AG ire Max. Product UP Range Stud ock Barrel Barrel Number ( ) (AG) Size idth Thickness ength I.D. SS SS SS SS SS / SS-32-4 SS-32-6 SS-32-8 SS SS Stud Size /4 ire Range Non-Insulated Butted Seam ocking Fork Terminals AG ire Max. Product UP Range Stud ock Barrel Barrel Number ( ) (AG) Size idth Thickness ength I.D. SS SS SS SS / Terminals, Kits and Tools Forks SS-33-6 SS-33-8 SS SS Stud Size /4 ire Range

60 Phone 800/ Fax 800/ Nylon Insulated with Insulation Grip ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-31-4-NB SS-31-6-NB SS-31-8-NB SS NB SS-31-4-NB SS-31-6-NB SS-31-8-NB SS NB Stud Size ire Range Nylon Insulated with Insulation Grip ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-32-4-NB SS-32-6-NB SS-32-8-NB SS NB SS NB / SS-32-4-NB SS-32-6-NB SS-32-8-NB SS NB SS NB Stud Size /4 ire Range

61 Nylon Insulated with Insulation Grip ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-33-6-NB SS-33-8-NB SS NB SS NB / SS-33-6-NB SS-33-8-NB SS NB SS NB Stud Size /4 ire Range Vinyl Insulated Butted Seam ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-31-4-P SS-31-6-P SS-31-8-P SS P Terminals, Kits and Tools Forks SS-31-4-P SS-31-6-P SS-31-8-P SS P Stud Size ire Range

62 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-32-4-P SS-32-6-P SS-32-8-P SS P SS P / SS-32-4-P SS-32-6-P SS-32-8-P SS P SS P Stud Size /4 ire Range Vinyl Insulated Butted Seam ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-33-6-P SS-33-8-P SS P SS P / SS-33-6-P SS-33-8-P SS P SS P Stud Size /4 ire Range

63 High-Temperature Butted Seam Standard Fork Terminals 900 F (482 ) Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. HT HT HT HT HT HT Stud Size ire Range Non-Insulated Brazed Seam Standard Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D Terminals, Kits and Tools Forks Stud Size ire Range Stud Size ire Range

64 Phone 800/ Fax 800/ Non-Insulated Butted Seam Standard Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D ** ** ** ** Not U isted or SA ertified Stud Size ire Range Stud Size ire Range

65 Nylon Insulated with Insulation Grip Standard Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 30-0-NB ** NB ** NB ** NB NB NB NB NB NB NB NB NB ** Not U isted or SA ertified 30-0-NB 30-4-NB 30-6-NB 31-6-NB 31-8-NB NB Stud Size ire Range Terminals, Kits and Tools Forks 32-6-NB 32-8-NB NB 33-6-NB 33-8-NB NB Stud Size ire Range

66 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam Standard Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 31-6-P P P P P P P P P P 31-8-P P 32-6-P 32-8-P P Stud Size ire Range P 33-8-P P Stud Size ire Range

67 Heavy-Duty Non-Insulated Butted Seam Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D Stud Size ire Range Heavy-Duty Non-Insulated Brazed Seam Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D Terminals, Kits and Tools Forks Stud Size ire Range Heavy-Duty Vinyl Insulated Butted Seam Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter P P P P P P Stud Size ire Range

68 Phone 800/ Fax 800/ Heavy-Duty Vinyl Insulated Butted Seam Flanged Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter P P P P P P Stud Size ire Range Heavy-Duty Nylon Insulated with Insulation Grip Flanged Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter NB NB NB NB NB NB Stud Size ire Range Non-Insulated Butted Seam Hook Tongue Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D Stud Size 6, 8, 10 6, 8, 10 6, 8, 10 ire Range

69 Vinyl Insulated Butted Seam Hook Tongue Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 41-6-P P P P P P P P P P 42-8-P P Stud Size 6, 8, 10 6, 8, 10 6, 8, 10 ire Range Nylon Insulated with Insulation Grip Hook Tongue Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 41-6-NB NB NB NB NB NB NB NB NB Terminals, Kits and Tools Hook Tongues 41-6-NB 42-8-NB NB Stud Size 6, 8, 10 6, 8, 10 6, 8, 10 ire Range

70 Phone 800/ Fax 800/ Non-Insulated Double Male-Female Disconnect Adapters Mates with Female & Male Product UP idth ( ) Number ( ) x Thickness * x MMF x *Not U isted or SA ertified MMF-250 Non-Insulated Fuse-lip Male Disconnect Adapter Male Product UP idth ( ) Number ( ) x Thickness 7M x M-250 Non-Insulated Male Tabs (Rectangular Tongue) Male Tab Product UP Stud idth ( ) Number ( ) Size x Thickness x x x S x S x Stud Size

71 Non-Insulated Male Tabs (Ring Tongue) Male Tab Product UP Stud idth ( ) Number ( ) Size x Thickness x x x Stud Size Vinyl Insulated Double Male Disconnect Adapters Male Tab Insulation Product UP idth ( ) Barrel Number ( ) x Thickness 7MM-250-P x ' 7MM-250-P 3 Terminals, Kits and Tools Specials 71

72 Phone 800/ Fax 800/ Non-Insulated Pin Terminals ire Product UP Range Pin Barrel Barrel Number ( ) (AG) Diameter ength I.D. P 81P P P P-47 82P-47 83P-55 ire Range Nylon Insulated with Insulation Grip Pin Terminals ire Product UP Range Pin Barrel Barrel Insulation Number ( ) (AG) Diameter ength I.D. P Diameter 81P-47-NB P-47-NB P-55-NB P P 81P-47-NB 82P-47-NB 83P-55-NB ire Range Vinyl Insulated Butted Seam Pin Terminals ire Product UP Range Pin Barrel Barrel Insulation Number ( ) (AG) Diameter ength I.D. P Diameter 81P-47-P P-47-P P-55-P P P P P P P P 81P-47-P 82P-47-P 83P-55-P ire Range

73 Nylon Insulated Bullet Style Male Disconnect Product UP AG (mm 2 ) Number ( ) ire Range O.D. Description T Nylon Plug (0.156 diameter) * Part can be used with the 901 ID onnector found on page 9 and diameter female receptacles. T-90-3 Automotive Ignition Terminals Product UP Number ( ) ire Range Description SP mm Spark Plug ire onnector - Straight Type SP mm Spark Plug ire onnecter - Angle Type D mm Distributor ire lip D mm Heavy Duty Distributor Ire lip SP-1 SP-2 D-7 D-8 3 Terminals, Kits and Tools Specials 73

74 Phone 800/ Fax 800/ Kits Scotchlok STK-1 Terminal Kit (Filled) The Scotchlok Terminal Kit is filled with 3M s most frequently purchased products, including 14 of our most popular terminals. The STK-1 is constructed of durable metal with individual 2 product compartments. hile the compartments keep you organized, the rugged metal frame protects the contents, even in the harshest environment. Overall box size is 13-3/4" x 10" x 2 1/2"H. UP Boxes/ Product ( ) olor ase STK-1 Terminal Box Red 1 Part # Scotchlok TH-440 rimping Tool 1 Scotchcode SPD-0-9 Tape Dispenser 1 Qty. 3M able Ties 100 3M able Ties 100 Highland RV18-8 Ring Tongue Terminal 50 Highland RV14-6 Ring Tongue Terminal 50 Highland RV14-8 Ring Tongue Terminal 50 Highland RV14-10 Ring Tongue Terminal 50 Highland RV10-10 Ring Tongue Terminal 25 Highland RV18-6 Ring Tongue Terminal 25 Highland FDV Female Disconnects 50 Highland BFV14-8 Fork Terminals 50 Highland BFV14-10 Fork Terminals 50 Highland BFV18-8 Fork Terminals 50 Highland BFV18-6 Fork Terminals 50 Highland BSV18 Butt onnectors 50 Highland BSV14 Butt onnectors 50 Highland BSV10 Butt onnectors 25 Scotchlok Heat Shrink Terminal Box (mpty) This rugged metal case with a customized interior of molded plastic has 20 individual terminal compartments, and one large crimp tool compartment. Order contents separately. Overall box size is 13-3/4" x 10" x 3 2 1/2"H. UP Boxes/ Product ( ) olor ase Heat Shrink Red 6 Terminal Box Scotchlok Steel Terminal Box (mpty) This metal case with plastic insert tray is divided into 14 terminal compartments, one tool compartment and two miscellaneous compartments. Order contents separately. Overall box size is /4" x 10" x 2 1/2"H. UP Boxes/ Product ( ) ase Red Terminal Box

75 Scotchlok Plastic Terminal Box (mpty) This is a plastic organizing box for terminals. It is divided into 13 compartments, including one size to hold a crimping tool. Order contents separately. Overall box size is 11" x 7" x 1 3/4"H. UP Boxes/ Product ( ) ase Yellow Terminal Box Scotchlok SDTK-1 Terminal Assortment Kit (Filled) The 3M Scotchlok SDTK-1 Terminal Assortment Kit consists of a white plastic case with 12 individual product compartments, including a space for your 3M TH-440 crimping tool. UP Boxes/ Product ( ) olor ase SDTK-1 Terminal Box hite 20 Part # 71M N 8 72M N 8 73M N N 8 71F N 8 72F N 8 73F N N 8 TH Qty. Scotchlok SDTK-2 Terminal Assortment Kit (Filled) The 3M Scotchlok SDTK-2 Terminal Assortment Kit consists of a white plastic case with 12 individual product compartments, including a space for your 3M TH-440 crimping tool. UP Boxes/ Product ( ) olor ase SDTK-2 Terminal Box hite 20 Part # Qty P S-P P P 8 BS-31-6-P 12 BS-32-6-P P 12 72F P P P N N 8 TH Terminals, Kits and Tools Kits 75