Insulated Crimp Terminals
|
|
|
- Eileen Kennedy
- 6 years ago
- Views:
Transcription
1 CONTENTS PVC Insulated ring terminals 3 PVC insulated spade terminals 3 PVC insulated pin terminals 4 PVC insulated blade terminals 4 PVC insulated butt connectors 4 PVC insulated female disconnectors 5 PVC fully insulated female disconnectors 5 PVC insulated male disconnectors 5 PVC insulated piggy back disconnectors 5 PVC fully insulated receptacle disconnectors 6 PVC insulated bullet disconnectors 6 Twin Cord-end terminals 6 Nylon insulated cord-end terminals 7 Crimping tools 8 Coming Soon 9 Insulated Crimp Terminals revised
2 INSULATED CRIMP TERMINALS R&D Technology s range of pre-insulated terminals is comprehensive, and is being developed continually as switchgear, contractors, terminal blocks etc evolve. In more recent years terminals have been getting smaller and we have developed our range of 0.5mm tab thickness quick connectors, increased our range of bootlace pins and introduced the 0.3mm range of terminals to name a few developments. Our terminals are of high quality, having many advanced features for ease of use. High quality product meeting the following International Standards ISO9001 UL Listed CUL Listed All terminals should be crimped onto the connector using an R&D Technology s crimper or any quality crimper that is designed to crimp the specifi c terminal type. If unsure of the terminal/conductor/crimper combination refer to the technical information following and test the nominal pull out force of the crimped connection. If the conductor does not pull out when the nominal pull out force is applied and held for one minute, this will give a good indication of the integrity of the joint. R&D Technology offer a range of crimpers for various applications and terminal types that are shown within this catalogue. Nominal Current Ratings and other specification (according to UL/cUL Standard) Terminal color Red Blue Yellow Wire Range (Sqmm) Terminal Material Plating Maximum Volts Maximum Temp. Ring Terminal 19A 27A 48A 600V Forked Spade 19A 27A 48A Copper 600V 75 degree C for PVC Pin connector 19A 27A 48A 99.9% Pure insulated 600V 105 degree C for Nylon Flat Blade 19A 27A 48A 600V insulated Tin Bullet 10A 15A 24A 300V Quick Splice 10A 15A 24A Brass 70% Copper 600V 105 degree C 10A 15A 24A 30% Zinc 300V Quick Connector Strip length for Terminals 6.0mm 6.0mm 7.0mm 75 degree C for PVC insulated/105 degree C for Nylon insulated Nominal Pull Out Force (according to UL/cUL Standard) Wire size (Sqmm) Pull Out Force (kg)
3 PVC INSULATED RING TERMINALS PVC INSULATED SPADE TERMINALS 1. MAXIMUM ELECTRICAL RATING : 600 VOLTS 3. TERMINAL MATERIAL: COPPER 1. MAXIMUM ELECTRICAL RATING : 600 VOLTS 3. TERMINAL MATERIAL: COPPER 6 INSULATION MATERIAL: VINYL (PVC) STUD SIZE d2 DIMENSIONS mm B L F E D dl STUD SIZE d2 B L F E D dl R1-2VC S1-3SVC R1-3VC S1-3VC R1-3.5SVC S1-3.5SVC R1-3.5MVC S1-3.5MVC R1-3.5LVC S1-3.5LVC R1-4SVC R1-4LVC S1-4SVC S1-4MVC R1-5VC S1-4LVC R1-6VC S1-5SVC R1-8VC S1-5LVC R1-10VC S1-6SVC R1-12VC S1-6LVC R2-2VC S1-8VC R2-3VC S2-3SVC R2-3.5SVC S2-3VC R2-3.5MVC S2-3.5SVC R2-3.5LVC S2-3.5MVC R2-4SVC S2-3.5LVC R2-4LVC S2-4SVC R2-5SVC S2-4MVC R2-SLVC S2-4LVC R2-6VC S2-5SVC R2-8VC S2-5LVC (7.3 R2-10VC S2-6SVC R2-12VC S2-6LVC R5-3VC S2-8VC R5-3.5SVC S5-3.5SVC R5-3.5LVC S5-3.5LVC R5-4SVC S5-4SVC R5-4LVC R5-5VC S5-4LVC S5-5VC R5-6VC S5-6SVC R5-8VC S5-6LVC R5-10VC S5-8VC ) R5- I2VC
4 PVC INSULATED PIN TERMINALS PVC INSULATED BLADE TERMINALS 1. MAXIMUM ELECTRICAL RATING : 600 VOLTS 3. TERMINAL MATERIAL: COPPER 6 INSULATION MATERIAL: VINYL (PVC) 1. MAXIMUM ELECTRICAL RATING : 600 VOLTS 3. TERMINAL MATERIAL: COPPER B L F E D dl B L F E D dl PT1-9VC PT1-10VC PT1-12VC PT1-13VC PT1-18VC PT2-9VC PT2-10VC PT2-12VC PT2-13VC PT2-18VC P T 5-13VC BT1-10VC BT1-11VC BT1-14VC BT1-18VC BT2-9VC BT2-10VC BT2-13VC BT2-18VC BT5-10VC BT5-18VC PVC INSULATED BUTT CONNECTORS 1. MAXIMUM ELECTRICAL RATING : 600 VOLTS 3. TERMINAL MATERIAL : COPPER STRIP 6. INSULATED MATERIAL : VINYL (PVC) L d D WBC1VC WBC2VC WBC5VC Insulated Crimp Terminals Catalogue
5 PVC INSULATED FEMALE DISCONNECTORS PVC FULLY INSULATED FEMALE DISCONNECTORS 2. MAXIMUM TEMPERATURE: 75 C NEMA TAB F1-2.8VC/5 0.5* F1-2.8VC/8 0.8*2.8 F1-4.8VC/5 0.5* F1-4.8VC/8 0.8*4.8 F1-6.4VC * F1-8VC 0.8* B F L E D dl F2-2.8VC/5 0.5* F2-2.8VC/8 0.8*2.8 F2-4.8VC/ F2-4.8VC/8 0.8* F2-6.4VC 0.8* F2-8VC 0.8* F2-9.5VC 1.2* F5-6.4VC 0.8* mm F5-9.5VC 1.2* MAXIMUM TEMPERATURE: 75 C NEMA TAB F1-2.8VFC/5 0.5* F1-2.8VFC/8 0.8*2.8 F1-4.8VFC/5 0.5* F1-4.8VFC/8 0.8*4.8 F1-6.4VFC * B F L E D dl F2-2.8VFC/5 0.5* F2-2.8VFC/8 0.8* F2-4.8VFC/5 0.5* F2-4.8VFC/8 0.8*4.8 F2-6.4VFC * F5-6.4VFC * PVC INSULATED MALE DISCONNECTORS PVC INSULATED PIGGY BACK DISCONNECTORS NEMA TAB DIMENSIONS inch (mm) B B1 F Fl L E D dl PB1-6.4VFC PB2-6.4VFC * PB5-6.4VFC NEMA TAB M1-2.8VC/5 0.5* M1-2.8VC/8 0.8* M1-4.8VC/5 0.5* M1-4.8VC/8 0.8* M1-6.4VC * M2-2.8VC/5 0.5* M2-2.8VC/8 0.8* M2-4.8VC/5 0.5* M2-4.8VC/8 0.8* M2-6.4VC * B F L E D dl M5-6.4VC *
6 PVC FULLY INSULATED RECEPTACLE DISCONNECTORS PVC INSULATED BULLET DISCONNECTORS B F L E D dl B F L E D dl RE1-4VFC RE2-4VFC RE2-5VFC RE5-5VFC BD1-4VC BD2-4VC BD2-5VC BD5-5VC TWIN CORD-END TERMINALS (DIN 46228/4) 1. TEMPERATURE RANGE : -40 C UP TO +105 C 2. TERMINAL MATERIAL: COPPER TUBE 3. PLATING: ELECTRO TIN PLATED 4. INSULATION MATERIAL: NYLON PACK COLOUR F L C W1 W2 SYSTEM 2 x 0.5 CT WHITE 2 x x x x 2.5 CT CT CT CT CT CT CT CT GREY RED BLACK BLUE 2 x 4.0 CT GREY 2 x 6.0 CT YELLOW 2 x 10.0 CT RED 2 x 16.0 CT BLUE 6 Insulated Crimp Terminals Catalogue
7 NYLON INSULATED CORD-END TERMINALS (DIN 46228/4) 1. TEMPERATURE RANGE : -40 C UP TO +105 C 2. TERMINAL MATERIAL: COPPER TUBE 3. PLATING: ELECTRO TIN PLATED 4. INSULATION MATERIAL: NYLON PACK F F L C W COLOUR SYSTEM CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE CE VIOLET PINK WHITE BLUE RED BLACK GREY ORANGE GREEN BROWN IVORY BBLACK RED BLUE 70 CE YELLOW 95 CE RED 120 CE BLUE 150 CE YELLOW 7
8 CRIMPING TOOLS JSL307 FOR INSULATED CORD END TERMINALS :0.25~2.5mm² JSL FOR 2 PCS INSULATED TERMINALS AND CONNECTORS (SINGLE CRIMP) OR 3 PCS INSULATED DISCONNECTORS (DOUBLE CRIMP) : 0.5~1.5mm²=22~16AWG 1.5~2.5mm²=16~14AWG 4~6mm²=12~10AWG JSL FOR 3 PCS INSULATED TERMINALS AND CONNECTORS (DOUBLE CRIMP) : 0.5~1.5mm²=22~16AWG 1.5~2.5mm²=16~14AWG 4~6mm²=12~10AWG JSL1370 FOR CORD END TERMINALS : 0.5~4.0mm² JSL Insulated Crimp Terminals Catalogue
9 Coming Soon WIRING DUCT Wiring Duct available in slotted, closed & open or solid wall variations. High impact strength self extinguishing 94V-0 PVC Service temperature 85 o C SPIRAL BANDING Manufactured from P. E. Binds Cables and protects them from damage CABLE TIE SADDLES Available in Screw-in or Stick-on Colour - White CABLE TIES Manufactured from UL approved Nylon 66 94V-2 Service Temperature -40 O C to O C One piece design ensures strong locking Packed Quantity 100 CABLE GLANDS Manufactured from UL approved Nylon 66 94V-2 black Temperature -40 O C to O C Cable Grab Claw stays on gland body to reduce installation time IP68 rating 9
10
Enclosures & Consumables
CONTENTS For more detailed Klemsan Product information visit: 1 http://www.rdtechnology.com.au/48/screw_connections,_terminals_ and_accessories.aspx Xtreme Isolator Handle 1 Xtreme Isolator Handle 2 Enclosures
Contents. Connectors - Crimp Terminals. Page
Farnell Page 249 Date: 17-08-0 time:21:21 Contents Page Bootlace Ferrules 250 Insulated Crimp Terminals - Imperial 21 Insulated Crimp Terminals - Metric 253 Non Insulated Crimp Terminals 22 Non Insulated
G R E E N L I T E. c a b l e a c c e s s o r y c o r p o r a t i o n
G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n GT Nylon Cable Ties 4 GT Nylon Cable Ties - Color 5 GS Screw-Mount
web:
web: CONTENTS INTRODUCTION 00 CU LUGS 00 TERMINALS 00 HEAT SHRINKABLES 00 CABLE TIES 00 CABLE MARKERS 00 GLANDS 00 CLEATS 00 PVC TAPES 00 INTRODUCTION Aftec Electrical Solutions Aftec international with
Insulated crimp terminals For reliable device connection
E L EC T R I FI C AT I O N P R O D U C T S, I N S TA L L AT I O N P R O D U C T S Insulated terminals For reliable device connection ELECTRIFICATION PRODUCTS AUSTRALIA AND NEW ZEALAND Spec-Kon Wire terminals
Termco Lugs and Terminals
Termco Lugs and Terminals Copper Crimp Lugs and Links Pre- and Uninsulated Terminals and Connectors www.hesales.com.au Termco Lugs and Terminals Copper Lugs & HD Terminals All Termco Heavy Duty Copper
CONTENTS UNINSULATED & PREINSULATE TERMINALS
CONTENTS UNINSULATED & PREINSULATE TERMINALS SECTION 4 SECTION 4 BI-METAL LUGS & LINKS NON-INSULATED PRE-INSULATED LUGS & LINKS..31 UNINSULATED RING TERMINAL UTILUG.....................................32
Engineered installation products Solutions for control panel applications
Engineered installation products Solutions for control panel applications 2 Engineered installation products Solutions for control panel applications Solutions for control panel applications ABB introduces
Electrical. Hardware & Fastening Solutions. Battery Supplies. J-Case Fuses - Regular... Page 162
Flag Style... Page 156 Electrical Batteries... Page 153 Mounting Pads (Adhesive Backed)... Page 161 Battery Supplies J-Case Fuses - Regular... Page 162 Booster Cable Supplies... Page 153 J-Case Fuses -
CONNECTORS - SINGLE POLE
CONNECTORS - SINGLE POLE CROCODILE CLIPS DAVID USE PHOTO SD0010 TERMINAL POSTS SOLDER TAGS CRIMP CONNECTORS CRIMPING TOOLS DAVID USE PHOTO SD0010 BOOTLACE FERRULES 2127 CABLE SPLICES 2128 CRIMP CONNECTORS
023_quick splice_vinyl. Terminals & Cable Ties
023_quick splice_vinyl Terminals & Cable Ties Terminals As a trusted brand, Panduit provides solutions that will stay strong for a wide range of general purpose applications and outlast the competition.
K SERIES PUSH ON & BULLET TERMINALS
Industrial products we wholesale, you distribute K SERIES PUSH ON & BULLET TERMINALS NYLON INSULATED PUSH ON TERMINALS VINYL INSULATED PIGGY BACK PUSH ON TERMINALS NYLON FULLY INSULATED BULLET TERMINALS
Fax: PO Box 100, 2222 Moore Rd. Jonesville, MI
1-800-447-3150 Fax: 1-517-849-9516 PO Box 100, 2222 Moore Rd. Jonesville, MI 49250 www.hillsdaleterminal.com INDEX Adapters...12 Battery & Welding Cable...17 Battery Terminals...16 Bullet Connectors...10
CTN U-TYPE DIE COLOR INDEX QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473 CTN U-TYPE DIE COLOR INDEX QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 32000 GL 80 32002 GL 84 3999 GL 0 32004 GL 4 3200 GL 5 32003 GL 38
PRODUCT CATALOG
www.hillsdaleterminal.com 2017 PRODUCT CATALOG Fuse Pullers 34 Heat Shrink Terminals 24 your needs or for additional information about our Heat Shrink Tubing 25 products and services. Heavy Duty Electrical
TRADING CO., INC. AUTOMOTIVE ELECTRICAL SUPPLIES. We carry a full line of electrical supplies and primary wire! Call today!!
& TRADING CO., INC. WWW.DYNATRONINDUSTRIES.COM AUTOMOTIVE ELECTRICAL SUPPLIES & TRADING CO., INC. 63 AUSTIN BLVD COMMACK NY 11725 TEL: (631)543-4490 FAX (631)543-4496 TOLL FREE: 1-800-669-3962 We carry
TECHNICAL INFORMATION
S ECTION Solderless Terminal Construction/Technical Information...-2 Numbering System...-4 Decimal Equivalent Chart...-5 Wire Gauge Conversion...-5 Stud Size Chart...-6 Ring Terminals...-7, 10, 12 Spade
Cable & Wiring Accessories
Cable & Wiring Accessories Rail Mount Terminals & DIN Rail Page 1. Busbar & Busbar Terminals Page 1. Cable Ties & Mounting Cradles Page 1. P.V.C. Slotted Trunking Page 1. Crimping Lugs & Ferrules Page
Cable & Wiring Accessories
Cable & Wiring Accessories Rail Mount Terminals & DIN Rail Page 1. Busbar & Busbar Terminals Page 1. Cable Ties & Mounting Cradles Page 1. P.V.C. Slotted Trunking Page 1. Crimping Lugs & Ferrules Page
Contents. 1. Wiring Terminals 2. Cable Ties and Fixings 3. Tools 4. Tapes 5. Heat Shrink Tubing 6. Automotive Range
www.krimpterm.co.uk Contents 1. Wiring Terminals 2. Cable Ties and Fixings 3. Tools 4. Tapes 5. Heat Shrink Tubing 6. Automotive Range TERMINALS Ring Terminals Ring Terminals SIZE COLOUR RR32 RR37 RR43
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
ELECTRICAL TABLE OF CONTENTS
N ELECTRICAL TABLE OF CONTENTS Electrical Vehicle and Trailer Wiring Codes... N- Trailer Side (Flat & Round) 7-Way Connectors... N- 6-Way Connectors... N- 5-Way Connectors... N- 4-Way Connectors... N-4
BATTERY. Connectors. Quick Cable products Lift Truck Parts Professionals
Only battery connectors that are UL & CUL listed - proven in both Canada & the USA for conductivity & safety. (Listed by UL STD.486A & CUL, when applied with Cable HexCrimp tools 4255-001, 4255-001M, 4255-001$
Pre-insulated terminals mm²
Pre-insulated terminals 0.1-6 ² 1 General information 2 Ring terminals 0.1-6 ² 3 Fork terminals 0.1-6 ² 4 Flanged fork terminals 0.5-2.5 ² 4 Hook terminals 0.5-2.5 ² 4 Pin terminals 0.1-6 ² 5 Blade terminals
circuit protection & wiring accessories
circuit protection & wiring accessories J J1 circuit breakers Circuit breakers and fuses are a cost-effective solution to protecting wiring, equipment and subsystems. While fuses are a one-time, disposable
FUSE & CIRCUIT PROTECTION
15 Order NLINE www.midwestwheel.com CATALOG NUMBER FUSE & CIRCUIT PROTECTION MINI /ATM Blade Fuses A cost-effective standard automotive fuse for use in automotive, battery and general DC applications.
A. General: Deliver, store and handle wire and cable in accordance with the manufacturer's instructions and as specified in Division 1.
SECTION 16120 WIRES AND CABLES 600 VOLTS AND BELOW PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Requirements for providing all wires and cables rated at 600 volts and below for complete electrical systems
Easy assembly with standard tools. Fully insulated for direct mounting to steel panels
Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series and Receptacles are the proven industry standard
GENERAL CATALOGUE. Certified Quality. Management System. Certified Enviromental. Management System
Certified Quality Management System Certified Enviromental Management System Certified Occupational Health & Safety Management System GENERAL CATALOGUE QUALITY POLICY AND OBJECTIVES This catalogue illustrates
PANAMF11 150KVa 3-pH AMF PANBASE Phase PANAMF KVa 3-pH AMF PANBASE Phase
Page 1 AMF PANELS 3-PHASE (12V / 24V) AMF PANELS 1-PHASE (12V / 24V) PANAMF201 10 Kva 1-pH AMF 8 400.00 PANAMF1 15 KVa 3-PH AMF 8 850.00 PANAMF202 15 Kva 1-pH AMF 8 400.00 PANAMF2 20KVa 3-PH AMF 8 850.00
Datasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
Water-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
Spade Terminals: Locking
Spade Terminals: Locking S SERIES FEATURES Tongue snaps around the screw & terminal is locked into place until the mounting screw can be tightened down. vinyl (PVC) 300V, 75 C. INSULATION TYPE WIRE RANGE
HVAC No. MFG Part No. Description Price
Thermostat Wire Ground Wire 392327 423011 118533 144760 118534 118535 14/4-50 18/2-RF/UL 18/2-UL 18/3-SPC 18/3-UL 18/4-UL 14/4 Tray Cable, 600V, THHN, Stranded, 50' Roll 18/2, Signaling Cable, Shielded,
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
Product Data Sheets. C.27/4 Series C.27/6 Series C.27/7 Series
Product Data Sheets C.27/4 Series C.27/6 Series C.27/7 Series 11 C.27/4 TYPICAL APPLICATIONS: the capacitor is used in series to the start-winding of the singlephase electric motor, allowing its starting
www.umaconnector.com The Flat Pin Connector Construction The flat pin connector has for many years been successful all over the world. Female and Male connector has the same construction. The housing is
circuit protection & wiring accessories
circuit protection & wiring accessories CIRCUIT BREAKERS P1 P BLOCKS & BUSBARS TERMINAL BLOCKS P2 P3 CONNECTORS, TERMINALS & FUSES P4 CLAMPS, CLEATS, CLIPS & TIES P5 P1 circuit protection & wiring accessories
TERMINAL CLASSIFICATION OF PRODUCTS GENERAL INFORMATION
CLASSIFICATION OF PRODUCTS VINYL(PVC) or NYLON INSULATED TERMINALS WITH INSULATION GRIP SLEEVE (Funnel & Non-Funnel Entry types) This 3-piece design terminal provides a permanently attached tin plated
Get a FREE Storage Rack!
Techspan Mini Flip Kit Program Get a FREE Storage Rack! 768181 Here s How: Buy any 5 of our s (listed below) that are packaged in our 11 W x 6 L x 1 H plastic storage trays, and you ll receive a FREE Grey
- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
Cam switches, Indication, Pushbuttons
Cam switches, Indication, Pushbuttons Feed-through terminals Feed-through connection terminals 2.5mm Current 26 amps - 750V / 24 amps - 800V 34 amps - 750V / 32 amps - 800V Width / Strip Length / Screw
Engineer Solar Limited
Engineer Solar Limited Bob Tsai Office: ( +86 ) -769-8258 6157 Cell: +86-181 - 2297-4380 sales@engineer-solar.com www.engineer-solar.com Solar MC4 Connectors PWM / MPPT Charge Controller Single 2.5/4.0/6.0/10.0
CONTENTS TERMINAL BLOCKS
CONTENTS SECTION 7 SECTION 7..................................57...........................................58...........................................59 STUD TYPE RAIL MOUNTED...........................................60
Circuit Breaker Types
Circuit Breaker Types Automatic Reset The circuit breaker cycles continuously during an overload condition until the overload is removed or corrected. Modified Reset The circuit breaker contains an additional
C A B L E C O N N E C T O R S
Quality in connection! Elematic Cabling Systems offers a large and complete range of crimping terminals, lugs and terminal blocks to satisfy the most different connection requirements in the widest application
...at Altech, of course!
FANTASTIC approved FERRULES...at Altech, of course! Approved for the US & Canadian Market Other great Altech CSA approved products: Miniature Circuit Breakers / Manual Motor Controllers DIN Rail and Panel
HALOGEN FREE INSULATED TERMINALS OPERATING TEMPERATURE UP TO 115 C. Cond. Size sqmm (AWG) Quantity Box/Bag 0,2 0,5 (24 20) 0,25 1,5 (22 16)
VP RP BP GP HAOGEN FREE INSUATED TERMINAS P range funnel entry OPERATING TEMPERATURE UP TO 115 C File no. E125401 The P range of terminals has been designed, to meet the increasing demands for improved
AMF PANELS 3-PHASE (12V / 24V)
Tel. (012) 804-0756 Fax 086 663 7918 E-Mail: info@quintax-generators.co.za Web: www.quintax-generators.co.za Address: 132, Conveyor Street, Silvertondale, Pretoria, 0184 AMF-3P-015 AMF-3P-020 AMF-3P-025
LOW PROFILE MINI FUSES AFTERMARKET MINI BLADE FUSES MINI BLADE FUSES. 34 AUTO MARINE PRODUCT CATALOGUE 2018/19 VISIT:
LOW PROFILE MINI FUSES Specifically designed to save space and weight in the latest vehicles. These fuses can be individually tested for continuity whilst installed. Colour Size LP02 2 Grey 10 LP03 3 Violet
KEY START PANELS 3-PHASE (12V / 24V) PANKEY Phase BASE LOAD PANELS 3-PHASE (12V / 24V)
Page 1 AMF PANELS 3-PHASE (12V / 24V) AMF PANELS 1-PHASE (12V / 24V) PANAMF201 10 Kva 1-pH AMF 11 828.30 PANAMF1 15 KVa 3-PH AMF 11 827.75 PANAMF202 15 Kva 1-pH AMF 12 017.50 PANAMF2 20KVa 3-PH AMF 11
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Introduction. Series P100. Encapsulated Pressure Control. Auto-reset Standard Duty and Heavy Duty. Manual reset Standard Duty. Feature and Benefits
PSC9919 European Refrigeration Controls Catalogue Catalog Section 6 Product Bulletin P100 Series P100 Encapsulated Pressure Control. Auto-reset Standard Duty and Heavy Duty. Manual reset Standard Duty.
Tool sets. Contents. Tool sets. Tool sets H.1. Introduction H.2. Tool cases H.4. Crimp Sets and accessories H.5. Assortment boxes and cases H.
Contents Tool sets Tool sets Tool sets Introduction H.2 Tool cases H.4 Crimp Sets and accessories H.5 Assortment boxes and cases H.11 Inserts H.12 H H.1 Introduction Tool sets Weidmüller offers a comprehensive
Circuit Breakers/Protection, Fuses/Fuse Products
Circuit Breakers/Protection, Fuses/Fuse Products CRCUT BREAKERS/PROTECTON, PAGES 169-172 FUSES/FUSE PRODUCTS, PAGES 174-182 i Understanding Type 1, Type 2 & Type 3 Circuit Breakers Type 1 Automatic Reset
Wiring Color Code - Direct Current Systems - Under 50 Volts
Wire & Cable Donovan Marine offers a complete line of marine wire and cable products. All wire and cable is RoHS compliant and built to meet SAE, UL, and/or CSA specifications. All wire is made in the
Fish Tapes... B-2 Fish Tape Accessories... B-6 Wire Pulling Lubricants... B-7 Accessories... B-11 Conduit Benders... B-12 Pulling Supplies...
Wire Termination Twist-On Wire Connectors.................. A-2 Wire Connector Accessories................ A-10 Push-In Wire Connectors................... A-11 Crimp Terminals & Splices..................
Han-Power Energy Bus Components
HARTING Electric Han-Power Energy Bus Components People Power Partnership Han Data Sheet 0080-7 Han-Power T Han-Power T Part-Number Drawing Dimensions in mm 09 12 008 4701 Cable gland please order separately
CONSUMABLES POWER 099 POWER CONNECTIONS 108 FUSES 115 CIRCUIT BREAKERS 116 FUSE HOLDERS 126 RELAYS & FLASHER UNITS 131 SOLENOIDS 132 JUNCTION BOXES
POWER CONSUMABLES POWER CONSUMABLES // PRODUCT FINDER 099 POWER CONNECTIONS 108 FUSES 115 CIRCUIT BREAKERS 116 FUSE HOLDERS 126 RELAYS & FLASHER UNITS 131 SOLENOIDS 132 JUNCTION BOXES With one of the most
AMF PANELS 3-PHASE (12V / 24V) 25 kva 3-Ph AMF 12V Panel R R kva 3-Ph AMF 12V Panel R
Tel. (012) 804-0756 Fax 086 663 7918 E-Mail: info@quintax-generators.co.za Web: www.quintax-generators.co.za Address: 132, Conveyor Street, Silvertondale, Pretoria, 0184 AMF-3P-015 AMF-3P-020 AMF-3P-025
BX8848 Installation Instructions 4 Diode Wiring Kit For Motorhomes With Red Tail Lights
For Motorhomes With Red Tail Lights WARNG: Incorrect wiring may result in blown fuses, damaged wiring, fire, or bodily injury. Blue Ox recommends installation of this kit by a trained professional. Blue
PRODUCT INFORMATION MULTI-STANDARD SC 2.1. U.I. Lapp GmbH
GmbH PRODUCT INFORMATION USA: UL-listed (MTW), Canada: CSA (TEW), Europe: H07V-K (depending on cross s.), tin-coated strands For use in the most important global markets Reduction in technical documentation
FLEX-O-POWER FLEXIBLE WELDING
EQUIPMENT cables FLEX-O-POWER FLEXIBLE WELDING & POWER CABLE High conductivity bunched flexible annealed copper conductors, insulated with a soft flexible grade PVC suitable for welding and power purposes.
Specialty Electrical Supplies and Tools
Specialty Electrical Supplies and Tools Connectors Terminals Tools Battery Accessories Circuit Protection Cable Ties & Accessories San Diego, California Office Phone 619.278.1302 * Fax: 619.542.9994 Electrical
Model C4 - Diagram #1
C-4 Model C4 - Diagram # 29 2 40 ASSEMBLY 43 38 2 4 52 4 44 4 28 3 ASSEMBLY 32 34 ASSEMBLY 42 7 7 5 50 49 33 57 29 37 3 20 2 2 48 ASSEMBLY 5 3 9 2 3 0 4 3 2 58 22 23 ASSEMBLY ASSEMBLY 54 53 ASSEMBLY 5
ELECTRICAL - Non Insulated Terminals
ELECTRICAL - Non Insulated Terminals Cable Connector (2946) Art. No. 00558 173 0 M6x6.3x0.8mm Cable Connector (2946) Art. No. 00558 160 61 M5x6.3x0.8mm Insulating Cover (2945) Art. No. 00558 180 9 6.3mm²
For a complete listing of kit contents, see page 225.
HS 455 Shrink Tube Kit - microseries Sealing & securing can now be taken to go! Contains 55 6" pieces of single wall 2-1 polyolefin, flexible type. I.D. ranges 1 8"- 1 2" in red, black, yellow and blue.
PLASTIC BOXES - WIRE DUCTS - DIN RAILS - CABLE TIES
PLASTIC BOXES - WIRE DUCTS - DIN RAILS - CABLE TIES TECNOMATIC CORP. www.tecnomatic.com PLASTIC BOXES TECHNICAL SPECIFICATIONS www.tecnomatic.com Material: ABS thermoplastic, heat resistant to 650 C, with
THE UK S BENCHMARK FOR TRI-RATED CABLE
THE UK S BENCHMARK FOR TRI-RATED CABLE Welcome to Clynder Cables Clynder Cables has over thirty years of experience in the supply of UK manufactured industrial electrical cables to the UK, European and
Fuse & Switch. BUCHANAN Terminal Blocks. Product Facts High Density Blocks. Fuse Blocks. Switch Blocks. Common Features of 300 & 0300 Series
Fuse & Switch Product Facts High Density n Fuse and Switch rated 15A and 300V. n High Density 0.36" [9.14] centerline spacing saves panel space; at least 33 circuits per foot. Fuse n Provide in-line circuit
Terminal Overview Stud Sizes Solderless Terminals, Rings, Spades
A_Solderless_A_Solderless.qxd 13-08-20 10:26 AM Page 1 1850 ilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: 416-741-7336 ax: 416-741-9104 SECTION A TERMINAS AND CONNECTORS TERMINAS AND CONNECTORS Terminal
Electrical Components & Accessories Catalogue TERMINATION CONNECTION PROTECTION BUNDLING IDENTIFICATION HARDWARE TOOLING KITS. carroll.com.
Electrical Components & Accessories Catalogue 2015 TERMINATION CONNECTION PROTECTION BUNDLING IDENTIFICATION HARDWARE TOOLING KITS carroll.com.au INTRODUCTION A TRADITION Of QUAlITy For over 35 years Carroll
Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS
TITAN pt. no.: 99 0000 0509 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS I n B e d F u e l T a n k Shown
GROUNDING & BONDING PRODUCTS
GROUNDING & BONDING PRODUCTS Busbars Page 5-3 Insulators Page 5-8 Grounding Products Page 5-9 Compression Tools, Lugs & Taps Page 5-14 Learn About CPI s Extended Limited Warranties for coverage of (2)
Circuit Breaker Types
Circuit Breaker Types Automatic Reset The circuit breaker cycles continuously during an overload condition until the overload is removed or corrected. Modified Reset The circuit breaker contains an additional
Electrical. Columbus Fleet Industrial Supply. Phone: Fax:
Electrical Columbus Fleet Industrial Supply www.cfisgroup.com Phone: 614-33-7464 Fax: 330-809-6378 1 Deka American Made Wire Stranded Annealed Bunched Copper Core Color-Coded PVC Insulation Wire, Nylon
Distribution Blocks & Bus-bar Solutions
Distribution Blocks & Bus-bar Solutions Insulated Multi Laminate Flexible Copper Bus-bars Threaded Copper Bus-bars Solid Copper Bus-bars Bus-bar Insulators & Supports Insulated Flexible Copper Braided
Installation Tips for your Crimestopper/ProStart Remote Start system (add-on for GM vehicles) v1.02 updated 1/16/2013
Installation Tips for your Crimestopper/ProStart Remote Start system (add-on for GM vehicles) v1.02 updated 1/16/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader
VINYL SOLDERLESS TERMINALS
VINYL SOLDERLESS TERMINALS 22-18 WIRE RANGE - RED Vinyl Insulated, Funnel Entry 395010 Stud Size #4-#6 00 395020 Stud Size #8-#10 00 395120 Stud Size #4-#6 00 395171 Box 500 395130 Stud Size #8-#10 00
Castle Model TSM-21 Standard Screw Pocket Machine
Castle Model TSM-21 Standard Screw Pocket Machine "For Models with Serial Number 62481 and Above" Items Included with Machine Part No. Description Qty B00964 Castle 9/64 Cobalt Drill Bit w 1/4" Shank 1
STANDARD SPECIFICATION FOR. LIGHTING AND DC DISTRIBUTION PANELS WITH MCBs DOCUMENT NO: 44LK-5100/E.02/011
Page 1 of 6 STANDARD SPECIFICATION FOR LIGHTING AND DC DISTRIBUTION PANELS WITH MCBs Rev No. Issue Date Pages Rev Description Prepared By Checked By Approved By 0 15.07.2008 6 Issued for FEED MSJ VDV VDV
Main catalogue. SNK Series Terminal Blocks Accessories Marking Solutions
Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions Summary See page 7 1SNK161026S0201 SNK Series, Terminal Blocks Screw clamp terminal blocks Accessories Marking solutions 1 A Smart
PREINSULATED COPPER TERMINALS
PREINSULATED COPPER TERMINALS : Connector material: electrolitic tinned copper (purity grade 99,9%) Insulation: polypropylene According to the norms: Humidity absorption: DIN 46228/4 - DIN 47002 for the
Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables)
Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables) Instructions Kit Contents 3 Lug Covers 3 Cold Shrink Terminations 12
Catalogue. Index INDUSTRIAL CABLE
Catalogue INDUSTRIAL CABLE 1. BARE COPPER EARTH WIRE 2. GENERAL PURPOSE HOUSE WIRE 3. SURFIX CABLE 4. FLAT TWIN & EARTH CABLE 5. CABTYRE CABLE 6. TWIN ILLUMINATION CABLE 7. SINGLE CORE FLEX 8. SOLID PANEL
D-Sub adapter Cable entry protection with metric cable entries Cable entry protection with Pg cable entries
Contents Page D-Sub adapter... 40.02 Han Split Hood... 40.04 Cable entry protection with metric cable entries... 40.06 Cable entry protection with Pg cable entries... 40.08 Coding for Hoods/Housings and
Electronic Circuit Breaker ESS20-0..
Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode
INSTRUCTION, GPT LOW VOLTAGE THERMAL SWITCH (LVTS) INSTALLATION KIT P/N
LIFT CORPORATION Sht. 1 of 9 DSG# M-07-18 Rev. ~ Date: 08/15/08 INSTRUCTION, GPT LOW VOLTAGE THERMAL SWITCH (LVTS) INSTALLATION KIT P/N 282473-01 LOW VOLTAGE THERMAL SWITCH (LVTS) P/N 905291 INSTRUCTION
VINYL SOLDERLESS TERMINALS
VINYL SOLDERLESS TERMINALS 22-18 WIRE RANGE - RED Vinyl Insulated, Funnel Entry 395010 Stud Size #4-#6 00 395020 Stud Size #8-#10 00 395120 Stud Size #4-#6 00 395171 Box 500 395130 Stud Size #8-#10 00
Battery Products. Call or Fax:
Call 905.820.6150 or 1.800.363.1588 ax: 905.820.6142 Email: sales@techspan.ca Battery Products What s New? Epoxy Coated Battery Terminals 3-Way Top Post Battery Terminals Quick Disconnect Top Post Battery
Data sheet chainflex CF8821
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Overall banding: Plastic foil 4. Core insulation: Mechanically high-quality TPE
Cable connection technology
Around the cable Cable connection technology Insulated crimp terminals... convincing solutions The Quality The elimination of every need to weld complicated operations to effect an electrical connection,
Timer Relays - Fixed & Adjustable
Solid State Solid State relays are suitable across all applications where reliability is paramount. Unlike conventional relays, Solid State relays use electronics in place of traditional contacts, allowing
RMP SERIES INFORMATION GUIDE
RMP SERIES INFORMATION GUIDE DESCRIPTION & DESIGN FEATURES Applications RMP series connectors can be used wherever high amperage connection of AC or DC power is required. Typical applications are the connection
ELECTRICAL WIRE AND FITTINGS
TOOLS HEAVY DUTY CRIMPING TOOL LENGTH 9 1/2 ECONOMY TYPE CRIMPING TOOL LENGTH 7 1/2 CABLE TIE INSTALLATION TOOL 0014004534 All electrical terminals, including Perma-seal and funnel entry nylon, are available
Tooling CONTENTS PAGE
CONTENTS PAGE Joule effect soldering devices... 3 Stripping tools...4-6 Pointer gauges... 7 Soldering & assembly tools...8-10 Installation tools...11-12 Tool kits for semi-rigid and flexible cables...13-22
Around the cable. Socket sleeves.... convincing solutions
Around the cable Socket sleeves... convincing solutions Socket sleeves (male and female) Socket sleeves (female) with cable stop bare brass not insulated, to DIN 46247/part 1-3 and similar Art. no. CSS
General characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
Power cable accessories catalogue
Power cable accessories catalogue Cable Lugs and Connectors Renewables A brighter future Jointing Tech is a specialist electrical distributor supplying a full range of power cable and accessories into