Miniature Fittings Stainless Steel 316. Hose nipple. Barb Configuration for easy insertion into the tube Holds the tube tightly.

Transcription

1 Miniature Fittings Stainless Steel 316 Series MS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose nipple assures easy installation removal. Line up various types Possible for special tubing in the same direction. Accepts many styles of plastic tubing Hose nipple hose elbow Accepts nylon, soft nylon, tubing. Hose nipple Barb Configuration for easy insertion into the Holds the tightly. Low tightening torque Tight seal Tube Possible for combination use of nylon tubing tubing. Cap nut Certainly hold the by manual clamping Easy removal of by loosening Stailess steel 316 Barb fitting Barb Configuration for easy insertion into the Holds the tightly. Tube Made to Order (Refer to page 266 for details.) Low tightening torque Tight seal 262 Specifications Applicable tubing material Applicable tubing O.D./I.D. Fluid Maximum operating pressure (at 20 C) Ambient fluid temperature Connection size Thread Principal Parts Material Material Nylon Soft nylon (1) Polyurethane ø3.1/ø2.1 ø3.1/ø2 FEP (2) Modified PTFE (3) Air/Water (4) 1.MPa 1MPa 0.MPa 1.MPa MPa to 60 C (Water: 0 to 60 C) (No freezing), R1/ JIS B020 (Metric fine thread) JIS B020, JIS B0203 (Taper thread for piping) (Metric fine thread) Note 1) Soft nylon tubing is not compatible with water. Note 2), Note 3) Applicable only for hose nipple type Note 4) Barb fitting, barb elbow barb tee are not compatible with water. PVC, Nylon 66, GF30% Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (00)

2 Miniature Fittings Stainless Miniature Steel Fittings 316 Series MB Description Application Note Description Application Note MS-AU-3 MS-AU-4 MS-AU-6 Barb elbow for soft MS-ALHU-3 MS-ALHU-4 MS-H-4 MS-H-6 Barb fitting for soft Hose nipple Hose elbow For soft nylon For For soft nylon For soft nylon For For soft nylon For nylon, soft nylon, For nylon, soft nylon, rotates at 360 around the stud axis ø3.1/ø2.1 x ø3.1/ø2 x ø3.1/ø2.1 x ø3.1/ø2 x MS-UL MS-UT MS-B MS-P MS-J MS-N MS-UN MS-ATHU-3 MS-ATHU-4 Universal elbow Universal tee Push Plug Extention fitting Nipple Universal nipple Barb tee for soft For reducing Rc 1/ female to female Use to plug unused port. Solid piece moves fitting up from work piece Fitting to workpiece fitting to fitting connection For soft nylon For soft nylon female x male female x female x male R 1/ x female male x female male x male male x male ø3.1/ø2.1 x ø3.1/ø2 x K M H KK D MS LQ MQR T Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (00)

3 Series MS Barb Fitting for Soft Tube: MS-AU-3/4/6 C ød L MS-AU-3 MS-AU MS-AU Barb Elbow for Soft Nylon: MS-ALHU-3/4/6 A C ød L MS-ALHU-3 MS-ALHU MS-ALHU-3, -4 Hose Nipple: MS-H-4/6 MS-H-4 MS-H-6 B ød 1. L E øf 6.. Effective area (mm 2 ) Mass (g) 3. flats B Hose Elbow: /6 A B C. 9. ød 1. E øf 6.. L M 1 16 N. 6 Effective area (mm 2 ) Mass (g) ø Universal Elbow: MS-UL Universal Tee: MS-UT Effective area: 2.4 mm 2 Mass: 4. g Effective area: 2.4 mm 2 Mass: 4. g 264 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (00)

4 Miniature Fittings Series MS Bushing: MS-B Plug: MS-P flats 10 flats Extension Fitting: MS-J Effective area: 12 mm 2 Mass:. g Nipple: MS-N Mass: 1.2 g K M H KK Mass: 3.4 g Barb Tee for Soft Tube: MS-ATHU-3/4/6 A1 A2 C ød MS-ATHU-3 MS-ATHU Mass: g D MS LQ MQR T MS-ATHU-3, -4 Universal Nipple: MS-UN flats flats Mass: 3. g Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (00)

5 Series MS Made to Order Specifications Please contact SMC for detailed dimensions, specifications, delivery. 1 Material Modification Symbol X3 X112 Suffix -X3 to the end of part number. Example) MS-AU-4-X3 Specifications material: Stainless steel 304, NBR part no. M-G2 material:, Special FKM part no. M-G3 Spare Parts Description Part no. M-G1 M-G2 M-G3 M-GH Material PVC Stainless steel 304, NBR, Special FKM Nylon 66, GF30% Applicable model Cap nut MS--4-P01 MS--6-P02 MS-H-4 MS-HL-4 MS-H-6 MS-HL-6 Be sure to read before hling. Refer to front matters 9 for Safety Instructions pages 13 to 16 for Fittings Tubing Precautions. Tightening of Thread 1. Tighten by h, give it an additional rotation with a wrench. Please check the number of tightening revolutions using the table below. If tightened excessively, thread portion may be damaged gasket may be deformed. This will cause air leakage. On the contrary, if tightened insufficiently, thread may loosen causing air leakage. Thread MS-AU- MS-H- MS-P MS-J MS-N MS-UN MS-HLH- MS-ALHU-3, 4 MS-UL MS-UT MS-ATHU-3, 4 Number of tightening rotations Approx. 1/6 to 1/4 rotation Note) Approx. 1/2 rotation Note) Note) As a guideline, the tightening torque should be 1 to 1. N m. 266 Precautions Use of Tube with Hose Nipple 1. Cut the perpendicularly to the axis to a little longer length than required (use cutter TK-1, TK-2 or TK-3 ). 2. Pass the through the cap nut. 3. Push the until it comes to the end of the barb portion, or it may cause air leakage or hose releasing. 4. Tighten the cap nut firmly by h on the fitting. Use of Tube with Barb Fitting 1. Cut the perpendicularly to the axis to a little longer length than required (use cutter TK-1, TK-2 or TK-3 ). 2. Push the until it comes to the end of the barb portion, or it may cause air leakage or release hose. Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (60) Outside Local Area: (00)