3 Terminals, Kits and Tools

Transcription

1 3 Terminals, Kits and Tools Glossary of Product Terminology 2 Terminals 6 For more than 30 years, 3M has been a leading supplier of Scotchlok terminals, disconnects, connectors and tools for use in the assembly and maintenance of electrical systems. Thousands of satisfied customers know our products for: ffective and reliable performance, being U isted and SA ertified, where appropriate; A variety of types, sizes and materials meeting a broad application range, including the demands of temperature and weather; Design features assuring easy installation of 3M products positive and easy wire insertion, elimination of strand hang-ups and wire twisting, and easy insulation entry. These are a few of the characteristics that make the installer s job easier. Kits 79 Tools 81 3 Terminals, Kits and Tools? Frequently Asked Questions hat does the insulation grip do? The insulation grip provides a second crimp on the wire insulation. It provides additional wire strain relief. It s excellent for high-vibration applications. hich 3M tools can I use with 3M terminals? hat s the difference between insulated and fully-insulated disconnects? hat temperatures do 3M terminals withstand? The handy reference guide on page 81 gives you a variety of choices of tools to use with 3M terminals. Insulated disconnects have barrel insulation only, and fullyinsulated disconnects are insulated from the barrel to the receptacle/tab. Non-insulated 3M terminals withstand temperatures up to 347 F (175 ). Insulated 3M terminals withstand temperatures up to 221 F (105 ). 1

2 Phone 800/ Fax 800/ Glossary of Product Terminology Adapters - To interconnect two connectors already attached to wires. Block Fork - Designed to use in terminal block because sides lie flat against barrier portion of terminal block. Bullet Style - Similar advantages as disconnects but are rounded. Gives reliable in-line connection because parts are made to have holding friction when joined. Usually for automotive use. Butt - Uses chamfered barrel ends to provide fast, easy wire insertion from both ends and a built-in wire stop for correct positioning. Must be crimped at both ends. losed-nd - Used in situations requiring pigtail of two or more wires. Flanged Fork - Gives the benefit of both the block and locking forks. Stays secure should screw loosen. Has tipped-up ends. Fork - Allows rapid connection of wire. Usually used on free-standing studs. Heavy-Duty - Products of heavier than normal gauge material. ommonly used by railroads. Hook - ombines the security of the ring with the convenience of the forks. ocking Fork - The spring-like tongue locks in place around the stud even when mount screw is not tightened. xtra force is required to remove from stud. Parallel - Similar to butt with overlapped wires and single crimp in center of connector. Used where space is limited. Pins - For installation in compression blocks. Used in urope for terminating stranded wire. Quick onnect (Disconnect) - Attached to mating part by tongue of female part slipping over male tab. Use of dents and rolled edges on female part provides excellent holding force, while allowing easy and quick disconnect. They are flat. Ring - The standard style of tongue; the safest and most reliable. It cannot be removed unless mounting screw is removed. Tab - Uses mounting hole for rivet or screw. Tap - No wire stripping is necessary; just lay wire in connector and crimp. onnection is made. 2

3 Standard Terminal onstruction Vinyl Insulated 9 3M Terminals provide a variety of design features assuring consistently effective, reliable performance and easy installation. Please refer to the illustrations at the numbered locations for the attributes described below. 1. One-piece, burr-free construction provides maximum electrical conductivity. lectrical bright-tin plating gives maximum corrosion resistance. Annealing relieves stress points and assures maximum installed strength. 2. Barrel-to-pad transition design minimizes flexing and bending. 3. Open-end design permits visual inspection of wire location before and after crimping. 4. hold on wire comes from multiple V grooves in #26-4 AG parts, resulting in excellent current flow. 5. Injection-molded insulations on terminals are the highest quality in the industry. 221 F (105 ) rated, tough, resistant electrical grade materials Molding ensures consistent wall thickness for maximum reliability after crimping Molding allows funnel barrel construction for easier installation Molding offers the crimp ridge and non-slip ridge 6. rimp ridge designed for positive location of tool on terminal barrel, resulting in few miscrimps. 7. Funnel barrel construction provides: Positive, easy wire insertion No hang-ups of wire strands ire twisting not necessary 8. Nylon-insulated terminals, with grip, feature a brass sleeve. Sleeve provides optimum grip on insulation, strain relief and vibration protection. Brass sleeve is recessed, which provides excellent flash-over protection. 9. Non-slip ridge so tool slides to correct position for a proper crimp and better workmanship. 10.Beveled leading edge for easy wire insulation entry Nylon Insulated with Insulation Grip Barrel Styles Non-insulated butted seam The most economical terminal, it is used where special performance or installation characteristics are not needed. Beveled mouth facilitates wire insertion. temperature for bare terminals: 347 F (175 ). Non-insulated brazed seam Beveled mouth facilitates wire insertion. an be crimped anywhere on barrel surface. Silver brazed seam will not open under crimping pressure or operating stresses. Unlike butted seam parts, stranded wire cannot escape barrel confines during, or after, crimping. temperature for bare terminals: 347 F (175 ). Vinyl insulated brazed and butted seams Used where insulated barrel is necessary and desirable. Terminal consists of brazed or butted part with flared, rigid molded polyvinyl chloride sleeve, securely attached and funneled for easy wire entry. ire insulation positions itself against funnel portion of vinyl sleeve, eliminating strand hang-up. rimping barrel and flared portion of sleeve provide excellent electrical contact plus mechanical stress relief at junction of insulation and barrel. Insulation has a non-slip ridge for ease of positioning crimping tool. Industry standard color coding indicates wire range. Insulators are rated at a continuous operating temperature range from -40 F to 221 F (-40 to 105 ). U isted and SA ertified for 600V building wire and 1,000V signs and lighting fixtures (luminaries). Nylon insulated butted seam with insulation grip Used where insulated barrel and positive insulation grip are necessary or desirable. Terminal consists of butted seam part with flared, seamless brass sleeve securely attached and covered with flared, molded nylon sleeve. ire insulation positions itself against funnel portion of brass sleeve. rimping barrel and flared portion of sleeve provide excellent electrical contact plus mechanical stress relief at junction of insulation and barrel. Positioning crimp tool is nearly mistake proof due to a step in nylon insulation. Industry standard color coding indicates wire range. Insulators are rated at a continuous operating temperature range from -40 F to 221 F (-40 to 105 ). U isted and SA ertified for 600V building wire and 1,000V signs and lighting fixtures (luminaries). 3 Terminals, Kits and Tools 3

4 Phone 800/ Fax 800/ Installation Procedure Funnel Barrel Feature provides an excellent electrical and mechanical connection. Funnel design guides wire into position. No wire strand hang-up as the wire is inserted, giving a fast, positive installation. ire is in place, ready for crimping. For maximum crimping performance, barrel of connector must be properly indexed in the crimp tool station. orrect crimping is important to assure a strong connection lectrical rimp Mechanical rimp Insulated Terminals and onnectors: Non-Insulated Terminals and onnectors: Indent should be opposite the barrel seam. orrect Incorrect Heat Shrink Terminals, onnectors and Disconnects 3M Heat Shrink pre-insulated terminals, connectors and disconnects protect against the most challenging of environments, making the best moisture protection available. They offer several advantages over conventional unsealed products. orrosion Resistance The adhesive-lined heat shrink material, when properly crimped and shrunk, provides a seal that is resistant to water, salt, steam and other related contaminants. Improved Mechanical Performance The adhesivelined heat shrink tubing adheres, when shrunk, to both the connector and the wire insulation, providing improved pullout strength and strain relief. Durable Heat Shrink Tubing Tough heat shrink tubing effectively resists abrasion, scoring, cut-through, and the effects of long term aging. Versatile and asy to Use 3M heat shrink terminals, splices and disconnects are available in wire sizes AG, and can be installed easily with a recommended tool and heat source. The connectors are color-coded for wire range identification, and the transparent tubing allows for visual inspection. High Temperature Terminals and onnectors 3M high temperature terminals and connectors are constructed of steel with a nickel plating. Their temperature rating for continuous use at 900 F (482 ) makes them perfect for use in ovens, motors, light fixtures and other applications where other connectors would corrode or melt. There is no applicable U or SA standard for high temperature steel parts. Application Procedure for Heat Shrink Products: 1. Strip wires to appropriate length as indicated on package label. 2. Insert wire into terminal and crimp with correct station of a recommended tool. 3. Apply heat with a recommended heat source. Standard rimp Terminal and onnector Specifications Materials rimp terminals and connectors are to be burr-free, annealed and bright-tin plated TP copper. Barrels shall be 0.25" long with brazed seams where specified. Insulation grip sleeves are to be tin-plated brass and attached securely to the barrel. Terminal insulators are to be molded polyvinyl chloride or nylon, U isted and SA ertified for 600V in building wire and 1,000V in signs and lighting fixtures (luminaries). onnector insulators are to be extruded polyvinyl chloride or nylon with a temperature rating of 221 F (105 ). onstruction All insulated terminals are to have funnel entry construction to prevent strand hang-up and a crimp ridge for proper tool location. Nylon insulated terminals and connectors are to have butted seam barrels with insulation grip sleeves. All terminal barrels are to have multiple V grooves for maximum conductor retention. idth learance ength Stud Size Barrel I.D. Barrel ength Note: All dimensions are measured in inches. Insulation Diameter

5 3M Terminal Numbering System Terminal Numbering System Features Prefix BS = Block Fork HT = High Temperature = ong Neck SS = Snap Fork T = T-Tap Terminal Style 1 = Ring Tongue 2 = Flanged Fork 3 = Fork or 3-ay 4 = Hook or 4-ay 5 = Flag Ring 6 = Butt 7 = Disconnect or losed nd 8 = Bullet Style or Pin 9 = Parallel 17 = Ring Tongue Tab 75 = Disconnect Flag 77 = Multi-Stack ire Gauge 0 = #26 24 AG, Yellow 1 = #22 18 AG, Red 2 = #16 14 AG, Blue 3 = #12 10 AG, Yellow 4 = #8 AG, Red 5 = #6 AG, Blue 6 = #4 AG, Yellow 12 = #12 10, Yellow 16 = #16 14, Blue 18 = #18 10, hite 22 = #22 18, Red or #22 14, hite 23 = #16 12 AG, Yellow or #14 12 AG, Red 0-3 = #16 14, diameter Additions = ocking lip F = Female FF = Double Female I = Interlock Barrel M = Male MF = Male Female MM = Double Male O = Open Barrel S = Semi- losed N = Brazed Seam Nylon P = Brazed Seam Vinyl Stud Size Pattern 0 = #0 S = Small 2 = #2 4 = #4 6 = #6 8 = #8 10 = #10 14 = #1/4" 26 = #2, 4, 6 38 = #3/8" 56 = #5/16 58 = #5/8" 75 = #3/4" 500 = #1/2" 610 = #6, 8, = #7/16" Diameter or Blade Size = Blade Stock = Blade Stock 156 = Bullet Diameter 180 = Bullet Diameter = Blade Stock = Blade Stock = Blade Stock = Blade Stock Terminal onstruction No ode = Butted Seam B = Insulation Grip = Fully Insulated M = Moisture Resistant N = Nylon Insulation NS = Nylon w/steel Sleeve P = Vinyl Insulated S = Seamless SN = Seamless Nylon SP = Seamless Vinyl = Brazed Seam 3 Terminals, Kits and Tools Map of Numbering System xamples: atalog Number: BS-31-4S- atalog Number: 71F NB Non-Insulated Brazed Seam Block Fork Nylon Insulated with Insulation Grip Female Disconnect BS S - 72F NB Block Fork Fork Stud Size Brazed Seam Disconnect Female Diameter Nylon Fully Insulated #22 18 AG Small #16 14 AG Insulation Grip Insulator olor oding Yellow (26-24 AG) Red (22-18 AG) Blue (16-14 AG) Yellow (12-10 AG) Red (8 AG) Blue (6 AG) Yellow (4 AG) 5

6 Phone 800/ Fax 800/ Non-Insulated Brazed Seam Butt onnectors Product UP ire Range Barrel Barrel Number ( ) (AG) Thickness ength I.D ire Range Nylon Insulated Seamless Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 61-S S S S 62-S 63-S ire Range Nylon Insulated with Insulation Grip Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 60-NB* NB NB NB *Not U isted or SA ertified 60-NB 61-NB 62-NB 63-NB ire Range Nylon Insulated with Insulation Grip, Moisture-Resistant Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 61-NBM NBM NBM Note: onnectors are filled with moisture-resistant grease 6 61-NBM 62-NBM 63-NBM ire Range

7 Vinyl Insulated Brazed Seam Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 64-P P P P 65-P 66-P ire Range Vinyl Insulated Butted Seam Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 61-P P P P 62-P 63-P ire Range Vinyl Insulated Seamless Butt onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 61-SP SP SP Terminals, Kits and Tools Butt onnectors 61-SP 62-SP 63-SP ire Range

8 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam Parallel onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 91-P P P P 92-P 93-P ire Range Non-Insulated Seamless Parallel onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 92-S S S 93-S ire Range Non-Insulated Butted Seam Parallel onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter ire Range

9 Non-Insulated Brazed Seam Parallel onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter Recommended Stranded ire ombinations 91 and 91P 1 #22 to 1 #22, 20, 18, 16 1 #20 to 1 #20, 18, 16 1 #18 to 1 #18 Min. MA: 1280, Max. MA: S 1 #18 to 1 #18, 16, 14, 12, 10 1 #16 to 1 #16, 14, 12, 10 1 #14 to 1 #14, 12, 10 1 #12 to 1 #12 Min. MA: 3240, Max. MA: and 96-P 1 #12 to 1 #12, 10, 8, 6, 4 1 #10 to 1 #10, 8, 6, 4 1 #8 to 1 #8, 6 Min. MA: 13060, Max. MA: ire Range Vinyl Insulated Brazed Seam Parallel onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 94-P P P P 95-P 96-P ire Range , 92-S and 92-P 1 #22 to 1 #22, 20, 18, 16, 14 1 #20 to 1 #20, 18, 16, 14 1 #18 to 1 #18, 16, 14 1 #16 to 1 #16 Min. MA: 1280, Max. MA: and 94-P 1 # 18 to 1 #18, 16, 14, 12, 10, 8 1 #16 to 1 #16, 14, 12, 10, 8 1 #14 to 1 #14, 12, 10, 8 1 #12 to 1 #12, 10 Min. MA: 3240, Max. MA: Parallel onnectors Proper ire Insertion 93 and 93-P 1 #18 to 1 #18, 16, 14, 12, 10 1 #16 to 1 #16, 14, 12, 10 1 #14 to 1 #14, 12 Min. MA: 3240, Max. MA: and 95-P 1 #14 to 1 #14, 12, 10, 8, 6 1 #12 to 1 #12, 10, 8, 6 1 #10 to 1 #10, 8, 6 1 #8 to 1 #8 Min. MA: 8220, Max. MA: Terminals, Kits and Tools Parallel onnectors 9

10 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam 3-ay onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 322-P P P P 316-P 312-P ire Range Nylon Insulated with Insulation Grip 3-ay onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 322-NB NB NB Terminals, Kits and Tools 3-ay onnectors 322-NB 316-NB 312-NB ire Range

11 Vinyl Insulated Butted Seam 4-ay onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 422-P P P P 416-P 412-P ire Range Nylon Insulated with Insulation Grip 4-ay onnectors Product UP ire Range Barrel Barrel Insulation Number ( ) (AG) Thickness ength I.D. Diameter 422-NB NB NB Terminals, Kits and Tools 4-ay onnectors 422-NB 416-NB 412-NB ire Range

12 Phone 800/ Fax 800/ Heat Shrink Nylon Fully-Insulated Female Disconnects Mates with ire Male Tab Product UP Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness D ength I.D. MNHU18-250DFIX* x MNHU18-250DFIK* x MNHU14-250DFIX* x MNHU14-250DFIK* x MNHU10-250DFIX x MNHU10-250DFIK x *indowless receptacle D MNHU18-250DFI MNHU14-250DFI MNHU10-250DFI ire Range High-Temperature Butted Seam Female Disconnects 900 F (482 ) Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D. HT-72F x HT-72F x HT-72F HT-72F ire Range High-Temperature Butted Seam Female Flag Disconnect 900 F (482 ) Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D. HT x HT ire Range Product Number ending in X = box; Product Number ending with K = bulk

13 Non-Insulated Butted Seam Female Disconnects Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D. 70F * x F * x F x F x F x F x F x F x F * x * Not U isted or SA ertified Product not shown 70F F F F F F F ire Range Terminals, Kits and Tools Disconnects 13

14 Phone 800/ Fax 800/ Non-Insulated Butted Seam Female Disconnect Flag Terminals Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D * x * x x x * Not U isted or SA ertified ire Range Vinyl Insulated Butted Seam Female Disconnects Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter 71F P x F P x F P* x F P x F P x F P x F P* x * Not U isted or SA ertified Product not shown 3 Terminals, Kits and Tools Disconnects 71F P 71F P 72F P 72F P 72F P 73F P ire Range

15 Nylon Insulated with Insulation Grip Female Disconnects Mates with Male Tab Product UP ire Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter 70F NB* x F NB* x F NB x F NB x F NB* x F NB x F NB x F NB x F NB* x * Not U isted or SA ertified Product not shown 70F NB 70F NB 71F NB 71F NB 72F NB 72F NB 72F NB ire Range Terminals, Kits and Tools Disconnects 73F NB ire Range

16 Phone 800/ Fax 800/ Fully Nylon Insulated Butted Seam Female Disconnects Mates with ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness D ength I.D. Diameter 71F N x F N x F N x F N x F N x D Stud Size 70F N 71F N 71F N 72F N 72F N ire Range Stud Size 73F N ire Range Terminals, Kits and Tools Disconnects 16

17 Fully Nylon Insulated with Insulation Grip Female Disconnects Mates with ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness D ength I.D. Diameter 70F NB* x F NB x F NB x F NB x F NB x F NB x * Not U isted or SA ertified D Stud Size 70F NB 71F NB 71F NB 72F NB 72F NB ire Range Stud Size 73F NB ire Range Nylon Insulated Butted Seam Bullet Style Female Disconnects ire Mating Snap Product UP Range Diameter Barrel Barrel Insulation Number ( ) (AG) S ength I.D. Diameter 82F-156-N F-180-N Terminals, Kits and Tools Disconnects S S 82F-156-N 82F-180-N ire Range

18 Phone 800/ Fax 800/ Nylon Insulated with Insulation Grip Bullet Style Female Disconnects ire Mating Snap Product UP Range Diameter Barrel Barrel Insulation Number ( ) (AG) S ength I.D. Diameter 81F-156-NB F-180-NB F-156-NB F-180-NB F-156-NB 81F-180-NB 82F-156-NB 82F-180-NB ire Range Heat Shrink Nylon Fully-Insulated Butted Seam Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness D ength I.D. MNHU18-250DMIX x MNHU18-250DMIK x MNHU14-250DMIX x MNHU14-250DMIK x MNHU10-250DMIX x MNHU10-250DMIK x D S S S S 3 Terminals, Kits and Tools Disconnects MNHU18-250DMI MNHU14-250DMI MNHU10-250DMI ire Range High-Temperature Butted Seam Male Disconnects 900 F (482 ) ire Male Tab Product UP Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D. HT-72M x HT-72M x HT-72M HT-72M ire Range Product Number ending in X = box; Product Number ending with K = bulk

19 Non-Insulated Butted Seam Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Number ( ) (AG) x Thickness ength I.D. 71M x M x M x M x M x M M M M M ire Range Vinyl Insulated Butted Seam Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter 71M P x M P x M P x M P x M P x Terminals, Kits and Tools Disconnects 71M P 71M P 72M P 72M P 73M P ire Range Nylon Insulated with Insulation Grip Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter 71M NB x M NB x M NB x M NB x M NB x M NB 71M NB 72M NB 72M NB 73M NB ire Range

20 Phone 800/ Fax 800/ Fully Nylon Insulated Butted Seam Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness D ength I.D. Diameter 71M N x M N x M N x M N x M N x M N mates with 71F N 71M N mates with 71F N 72M N mates with 72F N 72M N mates with 72F N 73M N mates with 73F N D 71M N 71M N 72M N 72M N 73M N ire Range Fully Nylon Insulated with Insulation Grip Male Disconnects ire Male Tab Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness D ength I.D. Diameter 71M NB x M NB x M NB x M NB x M NB x M NB mates with 71F NB 71M NB mates with 71F NB 72M NB mates with 72F NB 72M NB mates with 72F NB 73M NB mates with 73F NB 3 Terminals, Kits and Tools Disconnects D 71M NB 71M NB 72M NB 72M NB 73M NB ire Range Note: Mating female disconnects listed on pages 16 and

21 Self-Mating ross-ock Disconnect Non-Insulated Butted Seam ire Product UP Range Barrel Barrel Number ( ) (AG) ength I.D ire Range Self-Mating ross-ock Disconnect Vinyl Insulated Butted Seam ire Product UP Range Barrel Barrel Insulation Number ( ) (AG) ength I.D. Diameter 761-P P P P 762-P 763-P ire Range Self-Mating ross-ock Disconnect Nylon Insulated with Insulation Grip ire Product UP Range Barrel Barrel Insulation Number ( ) (AG) ength I.D. Diameter 761-NB NB NB Terminals, Kits and Tools Disconnects 761-NB 762-NB 763-NB ire Range

22 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam Bullet Style Male Disconnects ire Mating Snap Product UP Range Diameter Barrel Barrel Insulation Number ( ) (AG) S ength I.D. Diameter 81M-156-P M-180-P M-156-P M-180-P M-156-P M-156-P mates with 81F-156-N 81M-180-P mates with 81F-180-N 82M-156-P mates with 82F-156-N 82M-180-P mates with 82F-180-N 83M-156-P no Female S S 81M-156-P 81M-180-P 82M-156-P 82M-180-P 83M-156-P ire Range Nylon Insulated with Insulation Grip Bullet Style Male Disconnects ire Mating Snap Product UP Range Diameter Barrel Barrel Insulation Number ( ) (AG) S ength I.D. Diameter 81M-156-NB M-180-NB M-156-NB M-180-NB M-156-NB M-156-NB mates with 81F-156-NB 81M-180-NB mates with 81F-180-NB 82M-156-NB mates with 82F-156-NB 82M-180-NB mates with 82F-180-NB 83M-156-NB no Female S S S 3 Terminals, Kits and Tools Disconnects S S S S S 81M-156-NB 81M-180-NB 82M-156-NB 82M-180-NB 83M-156-NB ire Range Note: Mating female disconnects listed on pages 17 and

23 Butted Seam Bullet Style Male Disconnects ire Mating Product UP Range Snap Diameter Barrel Barrel Number ( ) (AG) S ength I.D. 81M M M M M Product not shown 81M M-156 ire Range Nylon Insulated with Insulation Grip Multi-Stack Disconnects Mates with ire Female and Male Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter NB x NB x Terminals, Kits and Tools Disconnects NB NB ire Range Vinyl Insulated Butted Seam Multi-Stack Disconnects Mates with ire Female and Male Product UP Range idth ( ) Barrel Barrel Insulation Number ( ) (AG) x Thickness ength I.D. Diameter P x P x P P ire Range

24 Phone 800/ Fax 800/ Non-Insulated Butted Seam Multi-Stack Disconnects ire Mating Product UP Range Snap Diameter Barrel Barrel Number ( ) (AG) S ength I.D x x P P ire Range Heat Shrink Brazed Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. MH18-6R/X MH18-6R/K MH18-8R/X MH18-8R/K MH18-10R/K MH18-10R/X MH18-6R/ MH18-8R/ MH18-10R/ Stud Size ire Range Terminals, Kits and Tools Disconnects and Ring Tongues 24 Product Number ending in X = box; Product Number ending with K = bulk

25 Heat Shrink Brazed Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. MH14-6R/X MH14-6R/K MH14-8R/X MH14-8R/K MH14-10R/X MH14-10R/K MH14-14R/SX / MH14-14R/SK / MH14-516R/SX / MH14-516R/SK / MH14-38RX / MH14-38RK / MH14-6R/ MH14-8R/ MH14-10R/ MH14-14R/S MH14-516R/S MH14-38R Stud Size /4 5/16 3/8 ire Range Heat Shrink Brazed Seam Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. MH10-8RX MH10-8RK MH10-10RX MH10-10RK MH10-14RX / MH10-14RK / MH10-38RX / MH10-38RK / Terminals, Kits and Tools Ring Tongues MH10-8R MH10-10R MH10-14R MH10-38R Stud Size /4 3/8 ire Range Product Number ending in X = box; Product Number ending with K = bulk 25

26 Phone 800/ Fax 800/ High-Temperature Butted Seam Ring Tongue Terminals 900 F (482 ) Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. HT-11-6S HT HT / HT-12-6S HT HT / HT HT HT / HT / HT-14-14S / HT / HT / Product not shown HT-11-6S HT HT-12-6S HT HT Stud Size /4 ire Range Terminals, Kits and Tools Ring Tongues HT HT HT-14-14S HT HT Stud Size 10 1/4 1/4 3/8 3/8 ire Range

27 Non-Insulated Brazed Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 11-2S S S S S / S / / Product not shown 11-4S- 11-6S S Stud Size /4 3/8 ire Range Terminals, Kits and Tools Ring Tongues 27

28 Phone 800/ Fax 800/ Non-Insulated Brazed Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 12-2S S S S S / / S / / / Product not shown 12-2S- 12-4S- 12-6S Stud Size ire Range Terminals, Kits and Tools Ring Tongues S S Stud Size /4 5/16 3/8 ire Range

29 Non-Insulated Brazed Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 13-4S S S S / / S / / S / / / / Product not shown 13-4S Stud Size ire Range Terminals, Kits and Tools Ring Tongues 13-14S S S Stud Size 1/4 5/16 3/8 1/2 ire Range

30 Phone 800/ Fax 800/ Non-Insulated Brazed Seam Ring Tongue Terminals 8 AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D S S / / / S / S / / Product not shown 14-10S S S- Stud Size 10 1/4 5/16 3/8 1/2 ire Range Non-Insulated Brazed Seam Ring Tongue Terminals 6 AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D S S / / / S / S / / Product not shown 3 Terminals, Kits and Tools Ring Tongues 15-10S S S- Stud Size 10 1/4 5/16 3/8 1/2 ire Range

31 Non-Insulated Brazed Seam Ring Tongue Terminals 4 AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D / / / S / S / Product not shown S- Stud Size 10 1/4 5/16 3/8 1/2 ire Range Non-Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D Product not shown 3 Terminals, Kits and Tools Ring Tongues Stud Size ire Range

32 Phone 800/ Fax 800/ Non-Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 11-2S S S S S / S / / Product not shown 11-4S 11-6S S Stud Size /4 3/8 ire Range Terminals, Kits and Tools Ring Tongues 32

33 Non-Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 12-2S S S S S / / S / / / Product not shown 12-4S 12-6S 12-8S S Stud Size /4 ire Range Terminals, Kits and Tools Ring Tongues 33

34 Phone 800/ Fax 800/ Non-Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. 13-4S S S S / / S / / S / / / / Product not shown 13-4S S 13-56S Stud Size /4 5/16 ire Range Nylon Insulated Brazed Seam Ring Tongue Terminals 8 AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 14-10S-N (Red) S-N (Red) 1/ N (Red) 5/ N (Red) 3/ S-N (Red) 7/ S-N (Red) 1/ N (Red) 5/ Product not shown 3 Terminals, Kits and Tools Ring Tongues 14-10S-N 14-14S-N N N S-N Stud Size 10 1/4 5/16 3/8 1/2 ire Range

35 Nylon Insulated Brazed Seam Ring Tongue Terminals 6 AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 15-10S-N S-N / N / N / S-N / S-N / N / Product not shown 15-10S-N 15-14S-N N N S-N Stud Size 10 1/4 5/16 3/8 1/2 ire Range Nylon Insulated Brazed Seam Ring Tongue Terminals 4 AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter N N / N / N / S-N / S-N / Product not shown 3 Terminals, Kits and Tools Ring Tongues N N N N S-N Stud Size 10 1/4 5/16 3/8 1/2 ire Range

36 Phone 800/ Fax 800/ Nylon Insulated with Insulation Grip Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 10-0-NB NB NB NB NB NB NB 10-2-NB 10-4-NB 10-6-NB 10-8-NB NB Stud Size ire Range Nylon Insulated with Insulation Grip Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 11-2S-NB S-NB S-NB NB S-NB NB NB NB NB S-NB / S-NB / NB / Product not shown 3 Terminals, Kits and Tools Ring Tongues 11-4S-NB 11-6S-NB NB NB 11-14S-NB 11-56S-NB NB Stud Size /4 5/16 3/8 ire Range

37 Nylon Insulated with Insulation Grip Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 12-2S-NB S-NB S-NB NB NB S-NB NB NB NB NB S-NB / NB / S-NB / NB / NB / Product not shown 12-4S-NB 12-6S-NB 12-8S-NB 12-8-NB NB Stud Size ire Range Terminals, Kits and Tools Ring Tongues NB NB 12-14S-NB 12-56S-NB NB Stud Size /4 5/16 3/8 ire Range

38 Phone 800/ Fax 800/ Nylon Insulated with Insulation Grip Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 13-4S-NB S-NB NB S-NB NB NB S-NB / NB / S-NB / NB / S-NB / NB / NB / NB / Product not shown 13-4S-NB 13-6-NB 13-8-NB NB Stud Size ire Range Terminals, Kits and Tools Ring Tongues 13-14S-NB 13-56S-NB 13-38S-NB Stud Size 1/4 5/16 3/8 ire Range

39 Vinyl Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 11-2S-P S-P S-P P S-P P P P P S-P / S-P / P / Product not shown 11-2S-P 11-4S-P 11-6S-P P Stud Size ire Range Terminals, Kits and Tools Ring Tongues P 11-14S-P 11-56S-P P Stud Size 10 1/4 5/16 3/8 ire Range

40 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 12-2S-P S-P S-P P P S-P P P P P S-P / P / S-P / P / P / Product not shown 12-4S-P 12-6S-P 12-8S-P 12-8-P P Stud Size ire Range Terminals, Kits and Tools Ring Tongues P P P 12-56S-P P Stud Size /4 5/16 3/8 ire Range

41 Vinyl Insulated Butted Seam Ring Tongue Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 13-4S-P S-P P S-P P P S-P / P / S-P / P / S-P / P / P / P / Product not shown 13-4S-P 13-6-P 13-8-P P Stud Size ire Range Terminals, Kits and Tools Ring Tongues 13-14S-P, 13-56S-P 13-38S-P Stud Size 1/4 5/16 3/8 ire Range

42 Phone 800/ Fax 800/ Non-Insulated Butted Seam Multi-Stud Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D , 4, , 8, , 4, , 8, , 8, Product not shown Stud Size 6, 8, 10 6, 8, 10 6, 8, 10 ire Range Non-Insulated Brazed Seam Multi-Stud Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D , 4, , 8, , 4, , 8, , 8, Product not shown 3 Terminals, Kits and Tools Ring Tongues Stud Size 6, 8, 10 6, 8, 10 6, 8, 10 ire Range

43 Vinyl Insulated Butted Seam Multi-Stud Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter P , 4, P , 8, P , 4, P , 8, P , 8, Product not shown P P P Stud Size 6, 8, 10 6, 8, 10 6, 8, 10 ire Range Nylon Insulated with Insulation Grip Multi-Stud Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter NB , 4, NB , 8, NB , 4, NB , 8, NB , 8, Product not shown 3 Terminals, Kits and Tools Ring Tongues NB NB NB Stud Size 6, 8, 10 6, 8, 10 6, 8, 10 ire Range

44 Phone 800/ Fax 800/ Heavy-Duty Non-Insulated Butted Seam Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D / / / / / Stud Size /4 ire Range Stud Size 5/16 3/8 7/16 1/2 ire Range Terminals, Kits and Tools Ring Tongues 44

45 Heavy-Duty Non-Insulated Brazed Seam Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D S / / / / / Product not shown Stud Size /4 ire Range Stud Size 5/16 3/8 7/16 1/2 ire Range Terminals, Kits and Tools Ring Tongues Product Number ending in X = box; Product Number ending with K = bulk 45

46 Phone 800/ Fax 800/ Heavy-Duty Vinyl Insulated Butted Seam Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 123-6S-P P S-P P P P / P / P / P / P / Product not shown P P P P Stud Size /4 ire Range Terminals, Kits and Tools Ring Tongues P P P P Stud Size 5/16 3/8 7/16 1/2 ire Range

47 Heavy-Duty Nylon Insulated with Insulation Grip Ring Tongue Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 123-6S-NB NB S-NB NB NB NB / NB / NB / NB / NB / Product not shown NB NB NB NB Stud Size /4 ire Range Terminals, Kits and Tools Ring Tongues NB NB NB NB Stud Size 5/16 3/8 7/16 1/2 ire Range Product Number ending in X = box; Product Number ending with K = bulk 47

48 Phone 800/ Fax 800/ High-Temperature Butted Seam Block Fork Terminals 900 F (482 ) Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. HT-BS HT-BS HT-BS-31-6 HT-BS-32-6 Stud Size 6 6 ire Range Non-Insulated Brazed Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-31-4S BS-31-6S BS BS BS BS-31-4S- BS-31-6S- BS BS BS Stud Size ire Range Non-Insulated Brazed Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-32-4S BS-32-6S BS BS BS Terminals, Kits and Tools Fork Terminals BS-32-4S- BS-32-6S- BS BS BS Stud Size ire Range

49 Non-Insulated Brazed Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS BS BS BS BS BS Stud Size ire Range Non-Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-31-4S BS-31-6S BS BS BS Terminals, Kits and Tools Forks BS-31-4S BS-31-6S BS-31-6 BS-31-8 BS Stud Size ire Range Non-Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-32-4S BS-32-6S BS BS BS BS-32-4S BS-32-6S BS-32-6 BS-32-8 BS Stud Size ire Range

50 Phone 800/ Fax 800/ Non-Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS BS BS BS-33-6 BS-33-8 BS Stud Size ire Range Nylon Insulated with Insulation Grip Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-31-4S-NB BS-31-6S-NB BS-31-6-NB BS-31-8-NB BS NB BS-31-4S-NB BS-31-6S-NB BS-31-6-NB BS-31-8-NB BS NB Stud Size ire Range Terminals, Kits and Tools Fork Terminals 50

51 Nylon Insulated with Insulation Grip Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-32-4S-NB BS-32-6S-NB BS-32-6-NB BS-32-8-NB BS NB BS-32-4S-NB BS-32-6S-NB BS-32-6-NB BS-32-8-NB BS NB Stud Size ire Range Nylon Insulated with Insulation Grip Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-33-6-NB BS-33-8-NB BS NB Terminals, Kits and Tools Forks BS-33-6-NB BS-33-8-NB BS NB Stud Size ire Range

52 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-31-4S-P BS-31-6S-P BS-31-6-P BS-31-8-P BS P BS-31-4S-P BS-31-6S-P BS-31-6-P BS-31-8-P BS P Stud Size ire Range Vinyl Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-32-4S-P BS-32-6S-P BS-32-6-P BS-32-8-P BS P Terminals, Kits and Tools Fork Terminals BS-32-4S-P BS-32-6S-P BS-32-6-P BS-32-8-P BS P Stud Size ire Range Vinyl Insulated Butted Seam Block Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-33-6-P BS-33-8-P BS P BS-33-6-P BS-33-8-P BS P Stud Size ire Range

53 Non-Insulated Brazed Seam Flanged Block Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-21-6S BS BS BS BS-22-6S BS BS BS BS BS BS Product not shown BS BS BS Stud Size ire Range Terminals, Kits and Tools Forks BS BS BS Stud Size ire Range BS BS BS Stud Size ire Range

54 Phone 800/ Fax 800/ Non-Insulated Butted Seam Flanged Block Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. BS-21-6S BS BS BS BS-22-6S BS BS BS BS BS BS Product not shown BS-21-6 BS-21-8 BS BS-22-6 BS-22-8 BS Stud Size ire Range BS-23-6 BS-23-8 BS Stud Size ire Range Terminals, Kits and Tools Fork Terminals 54

55 Nylon Insulated with Insulation Grip Flanged Block Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-21-6S-NB BS-21-6-NB BS-21-8-NB BS NB BS-22-6S-NB BS-22-6-NB BS-22-8-NB BS NB BS-23-6-NB BS-23-8-NB BS NB Product not shown BS-21-6-NB BS-21-8-NB BS NB BS-22-6-NB BS-22-8-NB BS NB Stud Size ire Range Terminals, Kits and Tools Forks BS-23-6-NB BS-23-8-NB BS NB Stud Size ire Range

56 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam Flanged Block Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter BS-21-6S-P BS-21-6-P BS-21-8-P BS P BS-22-6S-P BS-22-6-P BS-22-8-P BS P BS-23-6-P BS-23-8-P BS P Product not shown BS-21-6-P BS-21-8-P BS P BS-22-6-P BS-22-8-P BS P Stud Size ire Range Terminals, Kits and Tools Fork Terminals BS-23-6-P BS-23-8-P BS P Stud Size ire Range

57 Heat Shrink Brazed Seam ocking Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter MH18-6FX MH18-6FK MH18-8FX MH18-8FK MH18-10FX MH18-10FK MH18-6F MH18-8F MH18-10F Stud Size ire Range Heat Shrink Brazed Seam ocking Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter MH14-6FX MH14-6FK MH14-8FX MH14-8FK MH14-10FX MH14-10FK MH14-14FX / MH14-14FK / Terminals, Kits and Tools Forks MH14-6F MH14-8F MH14-10F MH14-14F Stud Size /4 ire Range Product Number ending in X = box; Product Number ending with K = bulk 57

58 Phone 800/ Fax 800/ Heat Shrink Brazed Seam ocking Fork Terminals AG Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter MH10-8FX MH10-8FK MH10-10FX MH10-10FK MH10-14FX / MH10-14FK / MH10-8F MH10-10F MH10-14F Stud Size /4 ire Range Non-Insulated Butted Seam ocking Fork Terminals AG ire Max. Product UP Range Stud ock Barrel Barrel Number ( ) (AG) Size idth Thickness ength I.D. SS SS SS SS Terminals, Kits and Tools Fork Terminals SS-31-4 SS-31-6 SS-31-8 SS Stud Size ire Range Product Number ending in X = box; Product Number ending with K = bulk

59 Non-Insulated Butted Seam ocking Fork Terminals AG ire Max. Product UP Range Stud ock Barrel Barrel Number ( ) (AG) Size idth Thickness ength I.D. SS SS SS SS SS / SS-32-4 SS-32-6 SS-32-8 SS SS Stud Size /4 ire Range Non-Insulated Butted Seam ocking Fork Terminals AG ire Max. Product UP Range Stud ock Barrel Barrel Number ( ) (AG) Size idth Thickness ength I.D. SS SS SS SS / Terminals, Kits and Tools Forks SS-33-6 SS-33-8 SS SS Stud Size /4 ire Range

60 Phone 800/ Fax 800/ Nylon Insulated with Insulation Grip ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-31-4-NB SS-31-6-NB SS-31-8-NB SS NB SS-31-4-NB SS-31-6-NB SS-31-8-NB SS NB Stud Size ire Range Nylon Insulated with Insulation Grip ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-32-4-NB SS-32-6-NB SS-32-8-NB SS NB SS NB / Terminals, Kits and Tools Fork Terminals SS-32-4-NB SS-32-6-NB SS-32-8-NB SS NB SS NB Stud Size /4 ire Range

61 Nylon Insulated with Insulation Grip ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-33-6-NB SS-33-8-NB SS NB SS NB / SS-33-6-NB SS-33-8-NB SS NB SS NB Stud Size /4 ire Range Vinyl Insulated Butted Seam ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-31-4-P SS-31-6-P SS-31-8-P SS P Terminals, Kits and Tools Forks SS-31-4-P SS-31-6-P SS-31-8-P SS P Stud Size ire Range

62 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-32-4-P SS-32-6-P SS-32-8-P SS P SS P / SS-32-4-P SS-32-6-P SS-32-8-P SS P SS P Stud Size /4 ire Range Vinyl Insulated Butted Seam ocking Fork Terminals AG ire Max Product UP Range Stud ock Barrel Barrel Insulation Number ( ) (AG) Size idth Thickness ength I.D. Diameter SS-33-6-P SS-33-8-P SS P SS P / Terminals, Kits and Tools Fork Terminals SS-33-6-P SS-33-8-P SS P SS P Stud Size /4 ire Range

63 High-Temperature Butted Seam Standard Fork Terminals 900 F (482 ) Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D. HT HT HT HT HT HT Stud Size ire Range Non-Insulated Brazed Seam Standard Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D Terminals, Kits and Tools Forks Stud Size ire Range Stud Size ire Range

64 Phone 800/ Fax 800/ Non-Insulated Butted Seam Standard Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D * * * Product not shown * Not U isted or SA ertified Stud Size ire Range Stud Size ire Range Terminals, Kits and Tools Fork Terminals 64

65 Nylon Insulated with Insulation Grip Standard Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 30-0-NB * NB * NB * NB NB NB NB NB NB NB NB NB * Not U isted or SA ertified 30-0-NB 30-4-NB 30-6-NB 31-6-NB 31-8-NB NB Stud Size ire Range Terminals, Kits and Tools Forks 32-6-NB 32-8-NB NB 33-6-NB 33-8-NB NB Stud Size ire Range

66 Phone 800/ Fax 800/ Vinyl Insulated Butted Seam Standard Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter 31-6-P P P P P P P P P P 31-8-P P 32-6-P 32-8-P P Stud Size ire Range P 33-8-P P Stud Size ire Range Terminals, Kits and Tools Fork Terminals 66

67 Heavy-Duty Non-Insulated Butted Seam Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D Stud Size 6 10 ire Range Heavy-Duty Non-Insulated Brazed Seam Fork Terminals Product UP ire Range Stud Barrel Barrel Number ( ) (AG) Size Thickness ength I.D Stud Size ire Range Heavy-Duty Vinyl Insulated Butted Seam Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter P P Terminals, Kits and Tools Forks P P Stud Size 6 10 ire Range

68 Phone 800/ Fax 800/ Heavy-Duty Vinyl Insulated Butted Seam Flanged Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter P P P P Stud Size 6 10 ire Range Heavy-Duty Nylon Insulated with Insulation Grip Flanged Fork Terminals Product UP ire Range Stud Barrel Barrel Insulator Number ( ) (AG) Size Thickness ength I.D. Diameter NB NB NB NB NB NB Stud Size ire Range Terminals, Kits and Tools Fork Terminals 68

69 Non-Insulated Double Male-Female Disconnect Adapters Mates with Female and Male Product UP idth ( ) Number ( ) x Thickness * x MMF x *Not U isted or SA ertified MMF-250 Non-Insulated Fuse-lip Male Disconnect Adapter Male Product UP idth ( ) Number ( ) x Thickness 7M x M-250 Non-Insulated Male Tabs (Rectangular Tongue) Male Tab Product UP Stud idth ( ) Number ( ) Size x Thickness x x x S x S x Product not shown 3 Terminals, Kits and Tools Specials Stud Size

70 Phone 800/ Fax 800/ Non-Insulated Male Tabs (Ring Tongue) Male Tab Product UP Stud idth ( ) Number ( ) Size x Thickness x x x Stud Size Vinyl Insulated Double Male Disconnect Adapter Male Tab Insulation Product UP idth ( ) Barrel Number ( ) x Thickness 7MM-250-P x ' 7MM-250-P 3 Terminals, Kits and Tools Ring Tongues 70

71 Non-Insulated Pin Terminals ire Product UP Range Pin Barrel Barrel Number ( ) (AG) Diameter ength I.D. P 81P P P P-47 82P-47 83P-55 ire Range Nylon Insulated with Insulation Grip Pin Terminals ire Product UP Range Pin Barrel Barrel Insulation Number ( ) (AG) Diameter ength I.D. P Diameter 81P-47-NB P-47-NB P-55-NB P P 81P-47-NB 82P-47-NB 83P-55-NB ire Range Vinyl Insulated Butted Seam Pin Terminals ire Product UP Range Pin Barrel Barrel Insulation Number ( ) (AG) Diameter ength I.D. P Diameter 81P-47-P P-47-P P-55-P P P P P 3 Terminals, Kits and Tools Specials P P P 81P-47-P 82P-47-P 83P-55-P ire Range Nylon Insulated Bullet Style Male Disconnect Product UP AG (mm 2 ) Number ( ) ire Range O.D. Description T-90-3* Nylon Plug (0.156 diameter) * Part can be used with the 901 ID onnector found on page 103 and diameter female receptacles. T

72 Phone 800/ Fax 800/ Highland Bagged Terminals Highland terminals, disconnects, and connectors are for use in the assembly and maintenance of electrical systems. Highland terminals offer effective and reliable performance in a variety of types of general applications. Available in low quantity, reclosable bags Highland terminals are the optimal choice for smaller jobs. 3M Highland Rings Non-Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase R R / R10-14Q / R R R R R R R R R R R R Product Number ending in Q=25; =50; =100 3 Terminals, Kits and Tools Bagged Terminals 72

73 3M Highland Rings Vinyl Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase RV RV RV10-8Q RV RV10-10Q RV / RV10-14Q / RV / RV10-38Q / RV10-516Q / RV RV RV RV RV RV RV / RV / RV / RV RV RV RV RV RV RV / RV / Product Number ending in Q=25; =50; =100 3M Highland Standard Forks Non-Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase F F Product Number ending in Q=25; =50; =100 3 Terminals, Kits and Tools Highland Terminals 73 73

74 Phone 800/ Fax 800/ M Highland Standard Forks Vinyl Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase FV FV10-8Q FV FV10-10Q FV FV FV FV FV Product Number ending in Q=25; =50; =100 3M Highland Block Forks Non-Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase BF10-8Q BF BF10-10Q BF BF BF BF BF BF Product Number ending in Q=25; =50; =100 3 Terminals, Kits and Tools Rings and Forks (Bagged) 74

75 3M Highland Block Forks - Vinyl Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase BFV BFV BFV10-8Q BFV BFV10-10Q BFV BFV BFV BFV BFV BFV BFV BFV BFV BFV BFV BFV Product Number ending in Q=25; =50; =100 3M Highland ocking Forks Non-Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase F10-8Q F10-10Q F10-14Q F F F F Product Number ending in Q=25; =50; =100 3 Terminals, Kits and Tools Highland Terminals 3M Highland ocking Forks Vinyl Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase FV10-6Q FV10-8Q FV10-10Q FV10-14Q FV FV FV FV FV Product Number ending in Q=25; =50; =100 75

76 Phone 800/ Fax 800/ M Highland Butt Splices Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase BS NA BS10Q NA BS NA BS NA BS NA Product Number ending in Q=25; =50; =100 3M Highland Butt Splices Vinyl Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase BSV NA BSV10Q NA BSV NA BSV NA BSV NA BSV NA Product Number ending in Q=25; =50; =100 3M Highland Female Disconnects Non-Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase FD FD FD FD FD FD FD Product Number ending in Q=25; =50; =100 3 Terminals, Kits and Tools Forks, Butt Splices and Female Disconnects (Bagged) 76

77 Phone 800/ Fax 800/ M Highland Female Disconnects Vinyl Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase FDV FDV10-250Q FDV FDV FDV FDV FDV FDV FDV FDV Product Number ending in Q=25; =50; =100 3M Highland Female Disconnects Nylon Fully Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase FDI FDI10-250Q FDI FDI FDI FDI FDI FDI FDI Product Number ending in Q=25; =50; =100 3M Highland Male Tabs Non-Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase MT MT Product Number ending in Q=25; =50; =100 3 Terminals, Kits and Tools Highland Terminals 77

78 Phone 800/ Fax 800/ M Highland Male Tabs Nylon Fully Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase MTI MTI10-250Q MTI MTI MTI MTI MTI MTI MTI Product Number ending in Q=25; =50; =100 3M Highland Male Tabs Vinyl Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase MTV MTV10-250Q MTV MTVI MTV MTV MTV MTV Product Number ending in Q=25; =50; =100 3M Highland Snap Plugs Vinyl Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase SPV SPV Product Number ending in Q=25; =50; =100 3M Highland Snap Receptacles Nylon Fully Insulated Product Stud or UP Number ire Range Tab Size ( ) Terminals/Bag Bags/ase SRI Product Number ending in Q=25; =50; =100 3 Terminals, Kits and Tools Female Disconnects, Tabs and Plugs (Bagged) 78

79 Kits 3M Scotchlok Terminal Assortment Kit STK-1 (Filled) The 3M Scotchlok Terminal Kit STK-1 is filled with 3M s most frequently purchased products, including 14 of our most popular terminals. The STK-1 is constructed of durable metal with individual product compartments. hile the compartments keep you organized, the rugged metal frame protects the contents, even in the harshest environment. Overall box size is 13-3/4" x 10" x 2 1/2"H. UP Boxes/ Product (051138) olor ase STK-1 Terminal Asst. Kit Red 1 Part # Scotchlok TH-440 rimping Tool 1 Scotchcode SPD-0-9 Tape Dispenser 1 Qty. 3M able Ties 100 3M able Ties 100 Highland RV18-8 Ring Tongue Terminal 50 Highland RV14-6 Ring Tongue Terminal 50 Highland RV14-8 Ring Tongue Terminal 50 Highland RV14-10 Ring Tongue Terminal 50 Highland RV10-10 Ring Tongue Terminal 25 Highland RV18-6 Ring Tongue Terminal 25 Highland FDV Female Disconnects 50 Highland BFV14-8 Fork Terminals 50 Highland BFV14-10 Fork Terminals 50 Highland BFV18-8 Fork Terminals 50 Highland BFV18-6 Fork Terminals 50 Highland BSV18 Butt onnectors 50 Highland BSV14 Butt onnectors 50 Highland BSV10 Butt onnectors 25 3M Scotchlok Heat Shrink Terminal Box (mpty) This rugged metal case with a customized interior of molded plastic has 20 individual terminal compartments, and one large crimp tool compartment. Order contents separately. Overall box size is 13-3/4" x 10" x 2 1/2"H. UP Boxes/ Product (054007) olor ase Heat Shrink Red 6 Terminal Box 3M Scotchlok Metal Terminal Box (mpty) This metal case with plastic insert tray is divided into 14 terminal compartments, one tool compartment and two miscellaneous compartments. Order contents separately. Overall box size is 13-3/4" x 10" x 2 1/2"H. UP Boxes/ Product (054007) ase Red Terminal Box Terminals, Kits and Tools Kits 79

80 Phone 800/ Fax 800/ M Scotchlok Plastic Terminal Box (mpty) This is a plastic organizing box for terminals. It is divided into 13 compartments, including one size to hold a crimping tool. Order contents separately. Overall box size is 11" x 7" x 1 3/4"H. UP Boxes/ Product (054007) ase Yellow Terminal Box M Scotchlok Terminal Assortment Kit SDTK-1 (Filled) The 3M Scotchlok SDTK-1 Terminal Assortment Kit consists of a white plastic case with 12 individual product compartments, including a space for your 3M TH-440 crimping tool. UP Boxes/ Product ( ) olor ase SDTK-1 Terminal Box hite 20 Part # 71M N 8 72M N 8 73M N N 8 71F N 8 72F N 8 73F N N 8 TH Qty. 3M Scotchlok Terminal Assortment Kit SDTK-2 (Filled) The 3M Scotchlok Terminal Assortment Kit SDTK-2 consists of a white plastic case with 12 individual product compartments, including a space for your 3M TH-440 crimping tool. UP Boxes/ Product ( ) olor ase SDTK-2 Terminal Box hite 20 Part # Qty P S-P P P 8 BS-31-6-P 12 BS-32-6-P P 12 72F P P P N N 8 TH