Terminal Overview Stud Sizes Solderless Terminals, Rings, Spades

Transcription

1 A_Solderless_A_Solderless.qxd :26 AM Page ilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: ax: SECTION A TERMINAS AND CONNECTORS TERMINAS AND CONNECTORS Terminal Overview Stud Sizes Solderless Terminals, Rings, Spades 22-16AG 16-14AG A2-A3 A4 A5-A6 A7-A8 A AG 8AG - 6AG 4AG to 1/0 AG 1/0AG-4/0 AG 250 MCM AG to 600 MCM AG Disconnects emale and Male Disconnects - Non-insulated Insulated Disconnects Insulated Disconnects - Double Crimp Male & emale Couplers - Nylon ully Insulated Non-Insulated & Nylon Insulated lag Disconnects Disconnect Adapters/Multi-ay adapters Piggy Back Disconnects Speciality Terminals Open Barrel Terminals/Socket Housings Male Terminals lag Terminals High Temperature Heat Shrink Terminals Ring / Spade Terminals Disconnects / Connectors Connectors Butt Connectors/Pin Terminals errules Vinyl Sleeves ire Connectors ire Combination Chart for Closed End Connectors Twist-On Type inged High Temperature/ire Connector Tools ire Connectors - Push-in Type Ballast Disconnects B-ire Connectors Insulation Displacement emale Disconnect useholder/ignition Terminals Quick Splice Speciality Connectors A9-A11 A11 A12 A12-A13 A14 A15 A16 A17 A18 A18 A19 A20 A21 A22-A23 A24 A25 A27 A28 A26 A29 A29-A30 A31 A32-A33 A33 A34 A35 A36 A37 A37-A38 A38 A39 TERMINAS AND CONNECTORS Battery Module A40-A42 ETIN DANIES reserves the right to discontinue, modify designs and change specifications without incurring obligation. hile every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error herein. Copyright 2013 ETIN DANIES

2 A_Solderless_A_Solderless.qxd :26 AM Page 2 Terminals TERMINA OVERVIE A2 ook to ETIN DANIES Solderless Crimp terminals for Quality Terminal Construction. e have been supplying the OEM, Distributor, and repair markets with our solderless crimp terminals since The following are quality features of our terminals and connectors: CSA Certified and U isted Terminals are made from pure 99.9% electrolytic tough pitch thick gauge copper with extremely high conductivity, 600V rated ire size is stamped on tongue Uniform lustre tin plating on all terminals for maximum corrosion protection e carry high inventory levels and can generally ship your requirements immediately e offer a very broad and complete product line and can meet most every need e carry a full line of crimping tools from the hand-held pliers, to ratchet, to pneumatic e also have available Mylar Tape Mounted terminals for high volume usage e carry a full line of twist-on wire nuts, push-in connectors, high temperature porcelain wire nuts and T-Tap connectors e have a full line of Nylon Close End connectors from #22 AG to #8 AG e carry a full line of insulated and non-insulated male and female disconnects, piggybacks,flags and tab connectors Quality design and features that provide long term solutions for your requirements Basic Barrel Construction Superior Brazed : Non-insulated tin plated copper terminals that will not open during or after crimping. The brazed seam can be crimped anywhere, even on the seam itself, without splitting. It has a chamfered barrel for fast, easy wire insertion. Used where no accidental contact possible leading to short circuit. V Insulated: High quality vinyl PVC insulation with funnel entry type which allows easy wire insertion, single crimp. Industry standard colour coding for ease of identification. VD (Vinyl PVC) and ND (Nylon) High quality insulated terminals and connectors with tin-plated easy entry copper sleeve which acts as the insulation grip, in addition to the bare wire grip, for superior pull out strength double crimp. Clear, secure, nylon is used in high vibration heavy industry applications. Industry standard colour coding for ease of identification. S : non-insulated tin-plated butted seam without solder available for those who want a less expensive alternative terminal. Available for the noninsulated rings and spades only, from #22 AG to #12 AG. S-HT non-insulated butted HIGH TEMPERATURE terminals 900º/484 ºC rated in stock HS heat shrinkable terminals in stock OR MORE INORMATION CA

3 A_Solderless_A_Solderless.qxd :26 AM Page 3 TERMINA OVERVIE Terminals Heat Shrink Insulated Terminals: Heat Shrink Insulated Terminals: utilize plastic and glue to seal and insulate the connection. After crimping or soldering the wire to the terminal, a torch or electric heat gun is used to shrink the plastic insulation around the wire-terminal joint and the glue inside the insulationmakes a moisture resistant seal. This product is ideal for automotive and other applications where dust and moisture could compromise the connection. hat Are The our Main Types of Termination Available: 1) Ring terminals are the most common. The ring on the end of the terminal is attached to a threaded stud and held in place with a nut. There are different size ring holes (or studs) depending on the equipment. 2) Spade terminals look like a two pronged fork. The advantage of a spade terminal is that you can attach them to a stud without completely removing the screw. Just loosen the screw, insert the spade terminal, and re-tighten. Some spades have a locking mechanism or bent flange that holds the spade in place even when the screw is loose. A3 3) Disconnect terminals slide in and out of each other. Naturally, one is female and one is male. These are used when the connection needs to be disconnected frequently. It is easy to slide the disconnect terminal on or off. Some disconnects are fully insulated so that no part of the connection is exposed after pushing the two together. 4) Butt splices are simple tubes that are used to connect two pieces of wire. One piece of wire is inserted into each side of the butt splice and the wire is crimped on each side. This is especially helpful to reconnect a wire that is accidentally cut. ire Ranges IRE RANGE AG mm / / / / /300 MCM /350 MCM /500 MCM /600 MCM /750 MCM /1000 MCM /1250 MCM /1750 MCM MCM 1000 * CONTINUA TYPE TERMINAS ON TAPE/CARRIER STRIP AVAIABE. INQUIRE ITH CUSTOMER SERVICE OR MORE INORMATION CA

4 A_Solderless_A_Solderless.qxd :26 AM Page AG SODERESS TERMINAS Solderless Terminals AG RING TERMINAS (1.25 mm 2 ) A5 STUD SIZE NON-INSUATED VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () Brazed ENGTH () UNNE ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # M V2216-M ND2216-M # M V2216-M ND2216-M # V ND # V ND / V ND / V ND / V ND D2 D AG SPADE TERMINAS (1.25mm 2 ) D2 D2 Brazed d1 STUD SIZE NON-INSUATED VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ENGTH () UNNE ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # YS3A V2216-YS3A ND2216-YS3A # YS4A V2216-YS4A ND2216-YS4A # S4A V2216-S4A ND2216-S4A # A V2216-5A ND2216-5A / A V2216-6A ND2216-6A OR MORE INORMATION CA

5 A_Solderless_A_Solderless.qxd :27 AM Page 6 Solderless Terminals AG SODERESS TERMINAS A AG ANGED SPADE TERMINAS (1.25 mm 2 ) STUD SIZE Brazed NON-INSUATED VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ENGTH () UNNE ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # S3B V2216-S3B ND2216-S3B # S4B V2216-S4B ND2216-S4B # S5B V2216-S5B ND2216-S5B AG OCKING SPADE TERMINAS (1.25 mm 2 ) D2 Brazed STUD SIZE NON-INSUATED VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ENGTH () UNNE ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # S V2216-3S ND2216-3S # S V2216-4S ND2216-4S # S V2216-5S ND2216-5S OR MORE INORMATION CA

6 A_Solderless_A_Solderless.qxd :27 AM Page AG SODERESS TERMINAS Solderless Terminals AG RING TERMINAS (2 mm 2 ) A7 Brazed NON-INSUATED VINY INSUATED NYON INSUATED STUD TONGUE STUD CEAR ENGTH ENGTH ITH TIN PATED ENGTH UNNE ENTRY SIZE IDTH () () () () COPPER SEEVE () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # M V1614-M ND1614-M # M V1614-M ND1614-M # V ND # M V1614-M ND1614-M # V ND / V ND / V ND / V ND / V ND D2 D AG SPADE TERMINAS (2 mm 2 ) D2 D2 Brazed d1 STUD SIZE NON-INSUATED VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ENGTH () UNNE ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # YS3A V1614-YS3A ND1614-YS3A # S3A V1614-S3A ND1614-S3A # YS4A V1614-YS4A ND1614-YS4A # S4A V1614-S4A ND1614-S4A # A V1614-5A ND1614-5A / A V1614-6A ND1614-6A OR MORE INORMATION CA

7 A_Solderless_A_Solderless.qxd :27 AM Page 8 Solderless Terminals AG SODERESS TERMINAS A AG ANGED SPADE TERMINAS (2 mm 2 ) STUD SIZE Brazed NON-INSUATED VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ENGTH () UNNE ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # S3B V1614-S3B ND1614-S3B # S4B V1614-S4B ND1614-S4B # S5B V1614-S5B ND1614-S5B AG OCKING SPADE TERMINAS (2 mm 2 ) D2 Brazed STUD SIZE NON-INSUATED VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ENGTH () UNNE ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # S V1614-3S ND1614-3S # S V1614-4S ND1614-4S # S V1614-5S ND1614-5S OR MORE INORMATION CA

8 A_Solderless_A_Solderless.qxd :27 AM Page , AG SODERESS TERMINAS Solderless Terminals AG RING TERMINAS (5.5 mm 2 ) A9 Brazed D2 D2 NON-INSUATED VINY INSUATED NYON INSUATED STUD SIZE TONGUE IDTH () STUD CEAR () ENGTH () UNNE ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # S V1210-S ND1210-S # S V1210-S ND1210-S # V ND # V ND / V ND / V ND / V ND / V ND / V ND OR MORE INORMATION CA

9 A_Solderless_A_Solderless.qxd :27 AM Page 10 Solderless Terminals AG SODERESS TERMINAS A AG SPADE TERMINAS (5.5 mm 2 ) Brazed D2 D2 d1 STUD SIZE NON-INSUATED VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ENGTH () AG ANGED SPADE TERMINAS (5.5 mm 2 ) UNNE ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # S3A V1210-S3A ND1210-S3A # S4A V1210-S4A ND1210-S4A # A V1210-5A ND1210-5A / A V1210-6A ND1210-6A Brazed STUD SIZE NON-INSUATED VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ENGTH () UNNE ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # S3B V1210-S3B ND1210-S3B # S4B V1210-S4B ND1210-S4B # S5B V1210-S5B ND1210-S5B OR MORE INORMATION CA

10 A_Solderless_A_Solderless.qxd :27 AM Page , 8, 6 AG SODERESS TERMINAS Solderless Terminals AG OCKING SPADE TERMINAS (5.5 mm 2 ) A11 Brazed D2 STUD SIZE NON-INSUATED VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () 8 AG RING TERMINAS (8 mm 2 ) ENGTH () UNNE ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm PART NUMBER in mm # S V1210-3S ND1210-3S # S V1210-4S ND1210-4S # S V1210-5S ND1210-5S / S V1210-6S ND1210-6S STUD SIZE NON-INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm # NK N8-NK # S N8-S # NK N8-NK # S N8-S / S N8-S / N / N / N Brazed D2 6 AG RING TERMINAS (14 mm 2 ) STUD SIZE NON-INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () () in mm in mm PART NUMBER in mm PART NUMBER in mm # NK N6-NK # N / N / N / N / N Brazed D2 OR MORE INORMATION CA

11 A_Solderless_A_Solderless.qxd :27 AM Page 12 Solderless Terminals 4, 2, 1/0 AG SODERESS TERMINAS A12 4 AG RING TERMINAS (22 mm 2 ) Brazed D2 NON-INSUATED NYON INSUATED STUD TONGUE STUD CEAR ENGTH ITH TIN PATED ENGTH SIZE IDTH () () () COPPER SEEVE () () in mm in mm PART NUMBER in mm PART NUMBER in mm # S N4-S / S N4-S / N / S N4-S / S N4-S / N / N AG RING TERMINAS (38 mm 2 ) Brazed D2 NON-INSUATED NYON INSUATED STUD TONGUE STUD CEAR ENGTH ITH TIN PATED ENGTH SIZE IDTH () () () COPPER SEEVE () () in mm in mm PART NUMBER in mm PART NUMBER in mm # S N2-S / S N2-S / N / S N2-S / N / S N2-S / N / N / N /0 AG RING TERMINAS (60 mm 2 ) Brazed NON-INSUATED STUD TONGUE STUD CEAR ENGTH SIZE IDTH () () () () in mm in mm PART NUMBER in mm 1/ / / / / / / / / / / / OR MORE INORMATION CA

12 A_Solderless_A_Solderless.qxd :27 AM Page 13 2/0, 3/0, 4/0 AG SODERESS TERMINAS Solderless Terminals 2/0 AG RING TERMINAS (70 mm 2 ) A13 NON-INSUATED STUD TONGUE STUD CEAR ENGTH SIZE IDTH () () () () in mm in mm PART NUMBER in mm 1/ / / / / / / / / / / / Brazed 3/0 AG RING TERMINAS (80 mm 2 ) NON-INSUATED STUD TONGUE STUD CEAR ENGTH SIZE IDTH () () () () in mm in mm PART NUMBER in mm 1/ / / / / / / / / / / / Brazed 4/0 AG RING TERMINAS (100 mm 2 ) NON-INSUATED STUD TONGUE STUD CEAR ENGTH SIZE IDTH () () () () in mm in mm PART NUMBER in mm 1/ / / / / / / / / / Brazed OR MORE INORMATION CA

13 A_Solderless_A_Solderless.qxd :27 AM Page 14 Solderless Terminals MCM AG SODERESS TERMINAS A MCM AG RING TERMINAS (150 mm 2 ) Brazed NON-INSUATED STUD TONGUE IDTH STUD CEAR ENGTH SIZE () () () () in mm in mm PART NUMBER in mm 5/ / / / MCM AG RING TERMINAS (180 mm 2 ) Brazed MCM AG RING TERMINAS (200 mm 2 ) Brazed NON-INSUATED STUD TONGUE IDTH STUD CEAR ENGTH SIZE () () () () in mm in mm PART NUMBER in mm 3/ / / NON-INSUATED STUD TONGUE IDTH STUD CEAR ENGTH SIZE () () () () in mm in mm PART NUMBER in mm 3/ / MCM AG RING TERMINAS (325 mm 2 ) Brazed NON-INSUATED STUD TONGUE IDTH STUD CEAR ENGTH SIZE () () () () in mm in mm PART NUMBER in mm 3/ / OR MORE INORMATION CA

14 A_Solderless_A_Solderless.qxd :27 AM Page 15 EMAE / MAE DISCONNECTS NON-INSUATED EMAE DISCONNECTS - NON-INSUATED Disconnects A15 IRE RANGE NEMA TAB (in) AG = mm AG = mm AG = mm 2 NON-INSUATED (in) x = 0.5 x 2.8 mm x = 0.8 x 2.8 mm x = 0.5 x 4.75 mm x = 0.8 x 4.75 mm x = 0.5 x 5.2 mm x = 0.8 x 6.35 mm PART NUMBER B E OD D Material AG.110 x.032 D2216T110A Brass AG.187 x.020 D2216T187A Brass AG.187 x.020 D2216T187A Brass AG.250 x.032 D2216T Brass AG.110 x.020 D1614T110A Brass AG.110 x.032 D1614T110A Brass AG.187 x.020 D1614T187A Brass AG.187 x.032 D1614T187A Brass AG.250 x.032 D1614T Brass AG.250 x.032 D1210T Brass MAE DISCONNECTS - NON-INSUATED AG = mm AG = mm AG = mm x = 0.5 x 2.8 mm x = 0.8 x 2.8 mm x = 0.5 x 4.75 mm x = 0.8 x 4.75 mm x = 0.5 x 5.2 mm x = 0.8 x 6.35 mm IRE RANGE NEMA TAB (in) NON-INSUAtED (in) PART NUMBER B E OD D Material AG.250 x.032 DM2216T Brass AG.187 x.020 DM1614T187A Brass AG.250 x.032 DM1614T Brass AG.250 x.032 DM1210T Brass OR MORE INORMATION CA

15 A_Solderless_A_Solderless.qxd :27 AM Page 16 Disconnects EMAE / MAE DISCONNECTS INSUATED A16 EMAE DISCONNECTS - INSUATED w IRE RANGE NEMA TAB (in) THICKNESS w AG = mm AG = mm AG = mm x = x = x = x = x = x = 0.5 x 2.8 mm 0.8 x 2.8 mm 0.5 x 4.75 mm 0.8 x 4.75 mm 0.5 x 5.2 mm 0.8 x 6.35 mm DIMENTIONS VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ARED ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () in mm in mm in mm PART NUMBER in mm PART NUMBER in mm AG.020 X VD2216T110A NDD2216T110A AG.032 X VD2216T110A NDD2216T110A AG.020 X VD2216T187A NDD2216T187A AG.032 X VD2216T187A NDD2216T187A AG.020 X VD2216T205A NDD2216T205A AG.032 X VD2216T NDD2216T AG.020 X VD1614T110A NDD1614T110A AG.032 X VD1614T110A NDD1614T110A AG.020 X VD1614T187A NDD1614T187A AG.032 X VD1614T187A NDD1614T187A AG.020 X VD1614T205A NDD1614T205A AG.032 X VD1614T NDD1614T AG.020 X VD1210T110A NDD A AG.032 X VD1210T110A NDD1210T110A AG.020 X VD1210T187A NDD1210T187A AG.032 X VD1210T187A NDD1210T187A AG.032 X VD1210T NDD1210T MAE DISCONNECTS - INSUATED AG = mm AG = mm AG = mm x = x = x = x = x = x = 0.5 x 2.8 mm 0.8 x 2.8 mm 0.5 x 4.75 mm 0.8 x 4.75 mm 0.5 x 5.2 mm 0.8 x 6.35 mm IRE RANGE NEMA TAB (in) THICKNESS DIMENTIONS VINY INSUATED NYON INSUATED TONGUE IDTH () STUD CEAR () ARED ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () in mm in mm in mm PART NUMBER in mm PART NUMBER in mm AG.020 X VDM2216T187A NDDM2216T187A AG.032 X VDM2216T187A NDDM2216T187A AG.032 X VDM2216T NDDM2216T AG.020 X VDM1614T187A NDDM1614T187A AG.032 X VDM1614T187A NDDM1614T187A AG.032 X VDM1614T NDDM1614T AG.032 X VDM1210T NDDM1210T OR MORE INORMATION CA

16 A_Solderless_A_Solderless.qxd :27 AM Page 17 EMAE / MAE DISCONNECTS Disconnects NYON UY INSUATED EMAE DOUBE CRIMP DISCONNECTORS A17 B C D IGURE AG = mm AG = mm AG = mm 2 B C D IGURE x = x = x = 0.5 x 4.75 mm 0.8 x 4.75 mm 0.8 x 6.35 mm IRE DIMENSION (in/mm) PART NUMBER NEMA TAB RANGE B D Thickness IG NDD2216T187A X (5.0) (6.5) (20.2) (11.0) (4.0) (0.4) NDD2216T187A X (5.0) (6.5) (20.2) (11.0) (4.0) (0.4) 2 NDD2216T X (6.6) (7.7) (21.5) (11.0) (4.0) (0.4) 1 NDD1614T187A X (5.0) (6.5) (20.2) (11.0) (5.0) (0.4) NDD1614T187A X (5.0) (6.5) (20.2) (11.0) (5.0) (0.4) 2 NDD1614T X (6.6) (7.3) (21.5) (11.0) (5.0) (0.4) NDD1210T X (6.6) (7.3) (24.2) (13.0) (6.5) (0.4) 2 VINY UY INSUATED EMAE DOUBE CRIMP DISCONNECTORS AG = mm AG = mm AG = mm x = x = x = 0.5 x 4.75 mm 0.8 x 4.75 mm 0.8 x 6.35 mm B C D IRE DIMENSION (in/mm) PART NUMBER NEMA TAB RANGE B D Thickness VDD2216T187A X (5.0) (6.4) (20.5) (10.5) (3.8) (0.4) VDD2216T187A X (5.0) (6.4) (20.5) (10.5) (3.8) (0.4) VDD2216T X (6.6) (7.3) (21.8) (10.5) (3.8) (0.4) VDD1614T187A X (5.0) (6.4) (20.2) (10.5) (4.7) (0.4) VDD1614T187A X (5.0) (6.4) (20.2) (10.5) (4.7) (0.4) VDD1614T X (6.6) (7.3) (22.2) (10.5) (4.7) (0.4) VDD1210T X (6.6) (7.3) (24.2) (10.5) (6.2) (0.4) NYON UY INSUATED MAE DOUBE CRIMP DISCONNECTORS AG = mm AG = mm AG = mm x = x = x = x = 0.5 x 4.75 mm 0.8 x 4.75 mm 0.5 x 5.2 mm 0.8 x 6.35 mm IRE RANGE B C D PART NUMBER NEMA TAB DIMENSION (in/mm) B D Thickness NDDM2216T X (6.35) (7.7) (24.0) (11.0) (4.0) (0.4) NDDM1614T X (6.35) (7.7) (24.0) (11.0) (4.0) (0.4) OR MORE INORMATION CA

17 A_Solderless_A_Solderless.qxd :27 AM Page 18 Disconnects EMAE / MAE COUPERS AG DISCONNECTS A18 NYON UY INSUATED MAE & EMAE COUPERS B C D IGURE 1 - EMAE B C D IGURE 2 - MAE AG = mm AG = mm AG = mm x = 0.5 x 4.75 mm x = 0.8 x 4.75 mm x = 0.5 x 5.2 mm x = 0.8 x 6.35 mm IRE PART NUMBER NEMA TAB B D Thickness RANGE in mm in mm in mm in mm in mm in mm IG AG ND2216T250C X AG ND1614T250C X AG ND1210T250C X AG NDM2216T250C X AG NDM1614T250C X AG NDM1210T250C X NON-INSUATED EMAE AG DISCONNECTS IGURE 1 IRE RANGE PART NUMBER NEMA TAB DIMENSION (in/mm) d1 Thickness IG AG D2218-1ST X (5.0) (7.0) (15.0) (1.6) (0.4) 1 D2218-1T X (6.6) (7.6) (15.2) (1.6) (0.4) AG D1614-1ST X (5.0) (7.0) (15.0) (1.6) (0.4) 1 D1614-1T X (6.6) (7.6) (15.2) (1.6) (0.4) 1 NYON INSUATED EMAE AG DISCONNECTS IGURE 1 IGURE 2 d1 d1 IGURE 1 d1 IGURE 2 IRE RANGE PART NUMBER NEMA TAB DIMENSION (in/mm) d1 Thickness IG AG ND2216-1ST X (5.0) (7.0) (15.0) (1.6) (0.4) 1 ND2216-1T X (6.6) (7.6) (16.0) (1.7) (0.4) AG ND1614-1ST X (5.0) (7.0) (15.2) (2.1) (0.4) 1 ND1614-1T X (6.6) (7.6) (16.0) (2.3) (0.4) 2 OR MORE INORMATION CA

18 A_Solderless_A_Solderless.qxd :28 AM Page 19 DISCONNECT ADAPTERS Disconnects DISCONNECT ADAPTERS A19 VC-2DM 2DM-1D-Y 2DM-1D-Z 2DM-1D-H CA3MR PART NUMBER TYPE mm(inch) mm(inch) VC-2DM (0.453) 27.8(1.094) 2DM-1D-Y Y 14.6(0.575) 20.0(0.787) 2DM-1D-Z Z 7.4(0.291) 18.0(0.709) 2DM-1D-H H 8.4(0.331) 21.0(0.827) S250-E - 7.9(0.311) 10.6(0.417) MUTI-AY ADAPTERS VC-2DSP MM Z V SAR SASR PART NUMBER IDTH () ENGTH () NEMA TAB DESCRIPTION in mm in mm in mm VC-2DSP AY BUET RECEPTACE MM AY ADAPTER (2 MAE TABS) Z CHAIR ADAPTER (2 MAE TABS) V º CHAIR ADAPTER (2 MAE TABS) SAR CHAIR ADAPTER (3 MAE TABS) SASR SIDE ADAPTER (8 AG) OR MORE INORMATION CA

19 A_Solderless_A_Solderless.qxd :28 AM Page 20 Disconnects PIGGY BACK DISCONNECTS A20 PIGGY BACK DISCONNECTS - NON INSUATED IRE RANGE NEMA TAB (in) AG = mm AG = mm AG = mm x = x = x = x = x = x = 0.5 x 2.8 mm 0.8 x 2.8 mm 0.5 x 4.75 mm 0.8 x 4.75 mm 0.5 x 5.2 mm 0.8 x 6.35 mm VINY INSUATED NYON INSUATED THICKNESS B D 1 1 ARED ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () in mm in mm in mm in mm in mm in mm in mm PART NUMBER in mm PART NUMBER in mm AG.032 x VDM2216T NDDM2216T AG.032 x VDM1614T NDDM1614T AG.032 x VDM1210T NDDM1210T PIGGY BACK DISCONNECTS - INSUATED C D 1 B AG = mm AG = mm AG = mm x = x = x = x = x = x = 0.5 x 2.8 mm 0.8 x 2.8 mm 0.5 x 4.75 mm 0.8 x 4.75 mm 0.5 x 5.2 mm 0.8 x 6.35 mm VINY INSUATED NYON INSUATED IRE RANGE NEMA TAB (in) THICKNESS B D 1 1 ARED ENTRY ENGTH () ITH TIN PATED COPPER SEEVE ENGTH () in mm in mm in mm in mm in mm in mm in mm PART NUMBER in mm PART NUMBER in mm AG.032 x VDM2216T NDDM2216T AG.032 x VDM1614T NDDM1614T AG.032 x VDM1210T NDDM1210T OR MORE INORMATION CA

20 A_Solderless_A_Solderless.qxd :28 AM Page 21 BARRE TERMINAS, SOCKET HOUSING Terminals OPEN BARRE TERMINAS (MAE AND EMAE) A21 EMAE PART NUMBER IRE GUAGE NEMA TAB IDTH () STUD SIZE () ENGTH () (in) in mm in mm in mm TI01T110(5) AG X.110 TI01T110(8) AG X.110 TO41T110(5) AG X.110 TO41T110(8) AG X.110 IM01T110(5) AG X.110 TO61T187(5) AG X.187 TO61T187(8) AG X.187 TO61T205(5) AG X.205 M61T AG X.250 TO61T AG X.250 TO71T AG X.250 TO81T AG X.250 TM61T AG X.187 O - EMAE M - MAE SOCKET HOUSINGS MAE POE MAE EMAE 3102Z Z Z Z HOUSING: (UNIT : mm) MATERIA: NY66 COOR: BACK OR MORE INORMATION CA

21 A_Solderless_A_Solderless.qxd :28 AM Page 22 Solderless Terminals MAE TERMINAS A22 MAE TERMINAS MT110(5)-2-45 MT110(8)-2-45 MT187(5)-6-45 MT187(8)-6-45 MT187(5) MT MT MT MTD MTD MTD MT110(5)-2-90 MT110(8)-2-90 MT187(5)-6-90 MT187(5)-8-90 MT187(5) MT MT MT MT S MT MTD MTD MTD MTPC110(5) MTPC110(8) or PCB MTPC110(5)RA MTPC110(8)RA or PCB MTPC187(5) MTPC187(8) or PCB MT250-6 MT250-8 MT MTD250-4 MTD250-6 MTD250-8 MTD MTPC-250 or PCB MTPC-250-RA or PCB MT-250 eld Tab for elements See Dimension Chart on next page MT eld tabs for elements TPC-250 VC2DM Double male connector 2DM-1D Y c```onnector OR MORE INORMATION CA

22 A_Solderless_A_Solderless.qxd :28 AM Page 23 MAE TERMINAS Solderless Terminals MAE TERMINAS (cont d) A23 PART NUMBER IDTH () STUD SIZE () ENGTH () in mm in mm in mm NEMA TAB (in) MT110(5)-2-45 # X.110 MT110(8)-2-45 # X.110 MT187(5)-6-45 # X.187 MT187(8)-6-45 # X.187 MT187(5) # X.187 MT # X.250 MT # X.250 MT # X.250 MTD # X.250 MTD # X.250 MTD # X.250 MT110(5)-2-90 # X.110 MT110(8)-2-90 # X.110 MT187(5)-6-90 # X.187 MT187(5)-8-90 # X.187 MT187(5) # X.187 MT # X.250 MT # X.250 MT # X.250 MT S # X.250 MT # X.250 MTD # X.250 MTD # X.250 MTD # X.250 MTPC110(5) X.110 MTPC110(8) X.110 MTPC110(5)RA X.110 MTPC110(8)RA X.110 MTPC187(5) X.187 MTPC187(8) X.110 MT250-6 # X.250 MT250-8 # X.250 MT # X.250 MTD250-4 # X.250 MTD250-6 # X.250 MTD250-8 # X.250 MTD # X.250 MTPC X.250 MTPC-250-RA X.250 MT X.250 MT X.250 TPC X.250 VC2DM DM-1D OR MORE INORMATION CA

23 A_Solderless_A_Solderless.qxd :28 AM Page 24 Terminals AG TERMINAS A24 AG TERMINAS Brazed DIMENTIONS NON-INSUATED IRE RANGE THICKNESS IDTH STUD CEAR ENGTH D d1 (T) () () () AG mm 2 in mm in mm in mm in mm in mm PART NUMBER in mm #10 G #10 G /4 G #10 G /4 G #10 G /4 G /16 G /4 G /16 G /4 G /16 G /4 G /16 G /8 G / /16 G1/ / /8 G1/ / /2 G1/ / /16 G2/ / /8 G2/ / /2 G2/ / /8 G3/ / /2 G3/ ONG BARRE AG TERMINAS PART NUMBER Range (AG) Stud Size IDTH () C Thickness Barrel ength Barrell MU18-6R/AG MU14-10R/AG OR MORE INORMATION CA

24 A_Solderless_A_Solderless.qxd :28 AM Page 25 HIGH TEMPERATURE TERMINAS Terminals HIGH TEMPERATURE TERMINAS A25 A1 A2 A3 B C D E PART NUMBER TYPE IGURE IRE RANGE (mm) (inch) STUD SIZE S2216-3HT RING A AG #6 S2216-4HT RING A AG #8 S2216-5HT RING A AG #10 S2216-6HT RING A AG /4 SC2216HT BUTT B AG D2216T250HT EMAE C AG D2216-1THT AG D AG TO61N250HT* EMAE E AG S1614-3HT RING A AG #6 S1614-4HT RING A AG #8 S1614-5HT RING A AG #10 S1614-6HT RING A AG /4 SC1614HT BUTT B AG D1614T250HT EMAE C AG D1614-1THT AG D AG S1210-3HT RING A AG #6 S1210-5HT RING A AG #10 S1210-6HT RING A AG /4 SC1210HT BUTT B AG D1210T250HT EMAE C AG TO81N250N* EMAE E AG *Open Barrel emale **All high-temperature rings and butts have butted seams Steel/nickel plated. Operating Temperature: 900 / 482ºC OR MORE INORMATION CA

25 A_Solderless_A_Solderless.qxd :28 AM Page 26 Terminals PARAE, BUTT SPICE CONNECTORS PIN TERMINAS A26 NON-INSUATED PARAE & BUTT CONNECTORS D d1 D d1 PARAE BUTT IRE RANGE PARAE BUTT D d1 T PART ENGTH () PART ENGTH () AG mm 2 in mm in mm in mm NUMBER in mm NUMBER in mm P C P C P C P C P C P C P C / P1/ C1/ / P2/ C2/ / P3/ C3/ / P4/ C4/ INSUATED PARAE & BUTT SPICE CONNECTORS d1 D d AG = mm AG = mm 2 PARAE D AG = mm 2 VINY INSUATED NYON INSUATED IRE RANGE D d1 BUTTED SEAM ENGTH () COPPER TUBUAR ENGTH () in mm in mm PART NUMBER in mm PART NUMBER in mm PARAE AG VP NP AG VP NP AG VP NP BUTT SPICE AG VC NC AG VC NC AG VC NC BUTT PIN TERMINAS T IRE RANGE E d1 D NON INSUATED VINY INSUATED d1 T D UNNE ENTRY D in mm in mm in mm in mm PART NUMBER in mm in mm PART NUMBER in mm in mm AG PC VPC AG PC VPC AG PC VPC Brazed OR MORE INORMATION CA

26 A_Solderless_A_Solderless.qxd :28 AM Page 27 HEAT SHRINKABE TERMINAS Heat Shrink HEAT SHRINKABE RING TERMINAS Maximum Electrical Rating: 600 Volts Shrink Temperature: 150 C Resistent Temperature: - 10 C ~ C Insulation Material: High Density PE Terminal Material: Copper EXTRA COPPER SEEVE ON BARRE IRE RANGE STUD ENGTH () IDTH () SIZE DOUBE CRIMP ENGTH () AG mm 2 in mm PART NUMBER in mm PART NUMBER in mm # HS2216-M HSD2216-M # HS2216-M HSD2216-M # HS HSD / HS HSD / HS HSD / HS HSD # HS1614-M HSD1614-M # HS1614-M HSD1614-M # HS1614-M HSD1614-M / HS HSD / HS HSD / HS HSD # HS HSD # HS HSD # HS HSD / HS HSD / HS HSD / HS HSD A27 HEAT SHRINKABE SPADE TERMINAS Maximum Electrical Rating: 600 Volts Shrink Temperature: 150 C Resistent Temperature: - 10 C ~ C Insulation Material: High Density PE Terminal Material: Copper EXTRA COPPER SEEVE ON BARRE IRE RANGE STUD ENGTH () IDTH () SIZE DOUBE CRIMP ENGTH () AG mm 2 in mm PART NUMBER in mm PART NUMBER in mm # HS2216-S3A HSD2216-S3A # HS2216-S4A HSD2216-S4A # HS2216-5A HSD2216-5A # HS1614-S3A HSD1614-S3A # HS1614-S4A HSD1614-S4A # HS1614-5A HSD1614-5A # HS1210-S3A HSD1210-S3A # HS1210-S4A HSD1210-S4A # HS1210-5A HSD1210-5A OR MORE INORMATION CA

27 B_ireConnectors_B_ireConnectors.qxd :53 AM Page 2 Heat Shrink HEAT SHRINKABE DISCONNECTS / CONNECTORS A28 *All high-temperature rings and butts have butted seams HEAT SHRINKABE MAE DISCONNECTS Terminals and Connectors D Maximum Electrical Rating: 600 Volts Shrink Temperature: 150 C Resistent Temperature: -10 C ~ C Insulation Material: Nylon & High Density PE Terminal Material: Brass NYON INSUATED IRE RANGE NEMA TAB IDTH () DIAMETER (D) ENGTH () PART NUMBER AG mm 2 in mm in mm in mm in mm x x HSNDM2216T x x HSNDM1614T x x HSNDM1210T HEAT SHRINKABE EMAE DISCONNECTS w D Maximum Electrical Rating: 600 Volts Shrink Temperature: 150 C Resistent Temperature: -10 C ~ C Insulation Material: Nylon & High Density PE Terminal Material: Brass NYON INSUATED IRE RANGE NEMA TAB IDTH () DIAMETER (D) ENGTH () PART NUMBER AG mm 2 in mm in mm in mm in mm x x HSND2216T x x HSND1614T x x HSND1210T ATERPROO BUTT SPICE CONNECTORS - HEAT SHRINK ITH TUBE SEAANT Maximum Electrical Rating: 600 Volts Shrink Temperature: 150 C Resistent Temperature: -10 C ~ C Insulation Material: High Density PE Terminal Material: Copper Tubular COPPER TUBE IRE RANGE STUD SIZE () ENGTH () PART NUMBER AG mm 2 in mm in mm SB SB SB OR MORE INORMATION CA

28 B_ireConnectors_B_ireConnectors.qxd :53 AM Page 3 ERRUES, VINY SEEVES Connectors ERRUES - NYON INSUATED A29 errules Nylon insulated for wire termination into European rail-type terminal blocks. IRE AG PART NUMBER COOR CODE D1 D2 C B d 22 TE-0.5 hite TE-0.75 Blue TE-1 Red TE-1.5 Black TE-2.5 Gray TE-4 Orange TE-6 Green d D1 D2 C B Terminals and Connectors VINY SEEVES 1501PVC 1502PVC 1503PVC 1505PVC 1506PVC 1508PVC OR MORE INORMATION CA

29 B_ireConnectors_B_ireConnectors.qxd :53 AM Page 4 Connectors SEEVES, COSED END CONNECTORS A30 VINY SEEVES (CONTINUED) Terminals and Connectors 1509PVC PVC PVC COSED END CONNECTORS A A A D C B IRE RANGE D C B 1 (CE Type) 2 (SDB Type) 3 (CD Type) NYON INSUATED B A C SEEVE ENGTH SEEVE ID UNNE ENTRY in mm in mm in mm in mm in mm PART NUMBER in mm AG CE230J AG CE AG CE AG CE AG SDB (CE1) AG SDB (CE2) AG SDB (CE5) AG SDB AG CE125S AG CE200S AG CE550S AG CE800N (CE-8) Nylon Closed End Connectors Etlin Closed End Connectors are made of Nylon with a tin plated copper tube to ensure a perfect crimp connection. Just strip the wires and insert securely inside the Closed End Connector, then crimp with a ratchet crimping tool. or use with copper wire only; use stranded or solid wire. Operating Temperature imit: 105 C Crimping and stripping instructions are included in each bag of Closed End Connectors. All connectors are U and CSA approved. Ratchet and air crimping tools are also available from Etlin. D C B ENGTH () IGURE OR MORE INORMATION CA

30 B_ireConnectors_B_ireConnectors.qxd :54 AM Page 5 COSED END CONNECTORS ire Connectors IRE COMBINATION CHART OR COSED END CONNECTORS A31 PART NUMBER IRE IRE 22 AG 20 AG 18 AG 16 AG 14 AG 12 AG 10 AG CE230J 2218-SDB CE125S CE1 CE SDB CE200S CE SDB CE550S CE5 CE800N 8-SDB CE800 CE AG AG AG AG AG AG AG AG AG AG AG AG AG AG AG AG AG AG AG AG AG Terminals and Connectors OR MORE INORMATION CA

31 B_ireConnectors_B_ireConnectors.qxd :54 AM Page 6 ire Connectors TIST-ON CONNECTORS A32 IRE CONNECTORS - TIST-ON TYPE Terminals and Connectors U 486C isted and CSA 22.2 #188 Certified Tough thermoplastic, U 94V-2 flame-retardant shell Rated to 600 V* Max. for building wiring and 1,000* V Max. in lighting fixtures/luminaries/signs Positive grip wire spring, easy installation, reusable Color-coded to industry standard * voltage and temperature rating specific to connector type PART NUMBER A B C D E in mm in mm in mm in mm in mm E E E E E A B C E D PART NUMBER COOUR U CSA IRE RANGE MIN MAX VOTAGE E-1 GREY 3#22 2#16 300V E-2 BUE 1#18 + 1#22 3#16 300V E-3 ORANGE 1#18 + 1#20 3#16 + 1#18 600V E-4 YEO 3#18 3#12 600V E-5 RED 2#14 2#10 600V PVC ire Nut Connectors with Springs Etlin ire Nut Connectors are the industry standard with durability and high quality. They come with square wire spring threads which make tightening easy and fast. These connectors are removable for re-use and are colour coded. Connectors are moulded from extruded PVC fire resistant material. They resist cracking and are excellent against environmental extremities. The high dielectric shell has a deep skirt design which prevents exposure of bare wire. The versatile selection of sizes covers building wires from #22 to #10 AG. Suffix CB means packed in 100 Pack cardboard box and suffix -25 means packed in 25 Pack poly bag with head card. HIGH TEMPERATURE TIST-ON CONNECTORS PART IRE RANGE COOUR U CSA NUMBER MIN MAX VOTAGE E-1B BACK 3#22 2#16 300V E-3B BACK 1#18 + 1#20 3#16 + 1#18 600V E-3B-25 BACK 1#18 + 1#20 3#16 + 1#18 600V E-3B-CB BACK 1#18 + 1#20 3#16 + 1#18 600V RATED at 150ºC. Made of high heat resistant thermaplastic rated to 600V MAX for building wiring and 1000V MAX in ighting ixtures/signs OR MORE INORMATION CA

32 B_ireConnectors_B_ireConnectors.qxd :54 AM Page 7 TIST-ON CONNECTORS ire Connectors A PASTIC PRODUCTION TIST CONNECTORS A33 PART NUMBER COOUR U CSA IRE RANGE MIN MAX VOTAGE H-1 YEO 2#22 2#16 + 1#22 300V H-1-CB YEO 2#22 2#16 + 1#22 300V H-3 IVORY 1#18 + 1#22 3#16 300V H-3-CB IVORY 1#18 + 1#22 3#16 300V H-5 IVORY 1#20 + 4#22 2#14 600V H-5-CB IVORY 1#20 + 4#22 2#14 600V *OR, SEE CHART ON PREVIOUS PAGE All Plastic ire Nut Connectors These Etlin All Plastic Connectors are used on OEM assembly applications, especially for production lines, and are easy to install without any power tools. They make a strong, secure connection and have a high dielectric strength. The long skirt length protects the wire insulation. The plastic is tough and shields against environmental extremes. Connectors resist cracking and are immune to chemical action from dilute acid and alkaline solutions. They are self-extinguishing and are heat resistant to 105 C. A B C D E Terminals and Connectors INGED IRE CONNECTORS - TIST-ON TYPE PART NUMBER A B C D E in mm in mm in mm in mm in mm E E E E E A B C D E PART NUMBER COOUR U CSA IRE RANGE MIN MAX VOTAGE E-11 YEO 2#18 3# E YEO 2#18 3# E-11-CB YEO 2#18 3# E-12 TAN 3#22 3# E TAN 3#22 3# E-12-CB TAN 3#22 3# E-13 RED 2#14 5# E RED 2#14 5# E-13-CB RED 2#14 5# E-15 GREY 3#14 + 1#18 3# E GREY 3#14 + 1#18 3# E-15-CB GREY 3#14 + 1#18 3# E-17 BUE 2#10 + 1#12 3#10 + 1# E BUE 2#10 + 1#12 3#10 + 1# E-17-CB BUE 2#10 + 1#12 3#10 + 1# OR MORE INORMATION CA

33 C_Connectors_C_Connectors.qxd :06 AM Page 2 ire Connectors TIST-ON CONNECTORS A34 Terminals and Connectors HIGH TEMPERATURE PORCEAIN TIST-ON CONNECTORS Porcelain ire Nut Connectors Etlin Porcelain ire Nuts are an excellent connector for high temperature applications rated up to 982 C (1800 ). They are commonly used in electrical, heating, lighting and cooking appliances. The large skirt permits easy wire installation and connection during hand or power drive assembly. They can be used for solid and/or stranded wire. PART IRE RANGE COOUR U NUMBER MIN MAX VOTAGE HI-1 HITE 2#18 1#16 + 1# HI-5 HITE 2#18 1#16 + 1# HI-7 HITE 2#18 1#16 + 1# ISTED AS PRESSURE TYPE CONNECTORS OR JOINING THE OOING COMBINATIONS O SOID AND/OR STRANDED IRE A B C E D HI-1 HI-5 Hi Volts Maximum 300 Volts Maximum 300 Volts Maximum 2, 3 or 4 No. 18 2, 3 or 4 No. 18 2, 3, 4 or 5 No or 3 No or 3 No No. 18 with 1, 2 or 3 No or 2 No. 18 with 1 or 2 No or 2 No. 18 with 1 No or 3 No. 18 with 1 No No. 18 with 1 No or 2 No. 18 with 1or 2 No. 16 2, 3 or 4 No No. 18 with 1 No No. 18 with 1 No No. 14 with 1, 2 or 3 No No. 16 with 1 No No. 18 with 1 No No. 14 with 1, 2 or 3 No No. 16 with 1 No No. 14 with 1, 2 or 3 No No. 14 with 1, 2 or 3 No No No. 12 with 1 or 2 No No. 12 with 1 No. 16 IRE CONNECTOR SOCKET TOOS The sockets have a hex shank design which can fit any pneumatic or electric tool having a 1/4" chuck or drive socket. It is used on screw-on wire connectors and winged wire connectors for reducing work fatigue and making a secure connections. or Screw-on ire Connectors: Socket No. Socket Color Use for Connector Model No. #3-49 Black E1(grey), E2(blue), E3 (orange) P3H (orange), P4H (yellow) #4-57 Black E4 (yellow), E6 (red), E6H (red) or inged ire Connectors: Socket No. Socket Color Use for Connector Model No. #11 hite E11 (yellow), E13 (red) #12 Black E12 (tan) #5-63 Black E11 (yellow), E12 (tan), E13 (red), E15 (grey) OR MORE INORMATION CA

34 C_Connectors_C_Connectors.qxd :06 AM Page 3 PUSH-IN CONNECTORS Connectors IRE CONNECTORS - PUSH-IN TYPE P-Nut ire Connectors General: Vibration Proof: The special design of the clamping spring makes the P-Nut vibration proof and eliminates all the problems of loose wires and connections associated with shipping and handling. Installation: Easy to install faster! No more twisting or tapping! Just strip and push. Time Saving: Speed up your production lines and decrease down-time. Convenient Testing: The front test port allows for testing without disconnecting wires. This makes quality control and trouble shooting more efficient. Applications: Junction Boxes Security/Alarm Applications Ballast Replacement Data/Telecom Hook-Up Control Panels ighting Retrofit Assembly ines A35 Terminals and Connectors PC252-T PC253-T PC254-T 0.41 (10.5) 0.53 (13.5) 0.68 (17.2) (9.5) (19.5) ø 0.1 (2.5) (9.5) 0 (19.7) ø 0.1 (2.5) (9.5) 0 (19.7) ø 0.1 (2.5) PC255-T PC258-T Technical Data: Housing Material: Thermoplastic, U 94V-2 flame retardant Current: 24A (VDE) Voltage: U-600V, VDE-450V orking Temperature: 110 C ire Range: AG Solid conductor Stripping ength: 0.43" (11.0 mm) Colour: Coded according to different position (9.5) 0.83 (21.1) Rating: U/cU ile No. E ø 0.1 (2.5) (16.8) ø 0.1 (2.5) C (19.7) (17.5) 0.75 (19.0) PART NUMBER NO. O POES COOUR IRE RANGE & RATING PC252-T 2 RED U: 600V 105º PC253-T 3 ORANGE CU, SO AG PC254-T 4 YEO VDE: 24A, 450V PC255-T 5 GREY -30ºC TO 100ºC, 2.5 mm 2, Sol PC258-T 8 BACK OR MORE INORMATION CA

35 C_Connectors_C_Connectors.qxd :06 AM Page 4 Connectors POER-SAE BAAST DISCONNECTS A36 Ballast Disconnects BD2-2 BD2-4 BD3-3 Terminals and Connectors SIZES IN MM SIZES IN MM SIZES IN MM Model Electrical Rating ire Type ire Range - ire Range - Quantity and ine Side oad Side Packed BD2-2 6 A/600V Solid 12 AG - 18 AG 12 AG - 18 AG 1,000 pcs - boxed 100 pcs - poly bagged 20 pcs - blister boxed Stranded 12 AG - 14 AG 12 AG - 14 AG BD2-4 6 A/600V 19 strand or less 1,000 pcs - boxed Stranded Tinned 12 AG =/< 19 strand 14 AG =/< 19 strand 16 AG =/< 26 strand 18 AG =/< 16 strand 12 AG =/< 19 strand 14 AG =/< 19 strand 100 pcs - poly bagged 20 pcs - blister boxed 16 AG =/< 26 strand BD3-3 6 A/600V 18 AG =/< 16 strand 1,000 pcs - boxed 100 pcs - poly bagged 20 pcs - blister boxed Cat No. BD2-2 BD2-2/CPB BD2-2/BB BD2-4 BD2-4/CPB B2-4/BB BD3-3 BD3-3/CPB BD3-3/BB Specifications: Housing: Polycarbonate (PC) Rated U94 V-0 Contacts: Copper Alloy Temp.Rating: orking temperature - 105C (221). Electrical Rating: 6A 600V on line side, 6A on load size Strip ength: 3/8 OR MORE INORMATION CA

36 C_Connectors_C_Connectors.qxd :06 AM Page 5 INSUATION DISPACEMENT CONNECTORS Connectors INSUATION DISPACEMENT CONNECTORS (IDCs) A U PART NUMBER COOUR TYPE O CONNECTION IRE RANGE VOTAGE MAXIMUM INS OD 314 BUE CAP 2/3 PIGTAI AG U HITE CAP 2/3 PIGTAI AG RED 2 PIGTAI AG RED 1 TAP AG HITE 2 PARAE AG Insulation Displacement Connectors (IDCs) Insulation Displacement Connectors offer labour saving convenience because stripping is not required. A wide variety of sizes and styles is offered for applications such as: fluorescent ballast installation and replacement, fixture and appliance wiring, automotive and marine wiring, and control circuit wiring. U isted and CSA Certified IDCs have a voltage rating of 600 V maximum for building wire; 1,000 V maximum for signs, fixtures and luminaries. Instructions for Use: No strip, no twist, just squeeze. Just that simple. The unique "U" contact provides fast dependable electrical connections without wire stripping. A "live spring" joint is made by driving the "U" contact down into the connector. As the "U" contact is pressed into the connector, it grasps conductors by displacing insulation. The "U" contact grips the conductor and holds with a firm, resilient pressure. 314, 314U, 557 & 558 Operating Temperature: 105 C U ile No. E23438 CSA ile No. R15503 Also meets the intent of U Standard for Portable Electric amps, U153, Paragraph 14.2, when housed within the body of the lamp. B-IRE CONNECTORS Terminals and Connectors CONNECTOR MATERIA: BRASS A..G ITEM NO. mm(inches) mm(inches) GREASE COOR B1 NO HITE 3.7(0.146) 25.0(0.984) B1-G YES BUE B2 NO HITE 4.0(0.157) 26.0(1.024) B2-G YES BUE OR MORE INORMATION CA

37 C_Connectors_C_Connectors.qxd :06 AM Page 6 Connectors INSUATION DISPACEMENT CONNECTORS A38 INSUATION DISPACEMENT CONNECTORS (IDC) OR COMMUNICATION 0 (10.1) Terminals and Connectors (8.3) 0 (6.1) UB (12.1) (19.4) PART NUMBER COOUR TYPE O CONNECTION IRE RANGE UB BUE TAP SOID UG GREEN TAP SOID UR RED 2-3 IRE BUTT SOID UY YEO 2 IRE BUTT SOID Insulation Displacement Connectors (IDC) for Communication Communications connectors may be used on standard polyethylene wire insulation, the polypropylene insulation of filled cable, and on pulp. Use of a connector is limited only to wire range and port size. ire sizes may be intermixed within a connector. (5.8) UR (9.0) 0 (12.0) (6.0) UY Instructions for Use: 1. Trim and straighten conductors. 2. Separate and fully insert conductors. 3. Crimp with cap side down. Allows quick, visual check before and after crimp. Communication Connector Tool (E Series) Stepped jaws tool is used for crimping communications connectors. Use caution to make sure wire and insulation is pushed completely into the connector before crimping. It is recommended that when splicing 19 AG using the tool that no more than two conductors be crimped. EMAE DISCONNECTS - USE HODERS A..G ITEM NO. mm(inches) mm(inches) GREASE COOR ATC SERIES 35.0(1.376) 34.0(1.339) IGNITION TERMINAS TERMINA MATERIA: IT1 BRASS: IT2, IT3: STEE PART NUMBER IG mm(inch) mm(inch) IT (.276) 10.0(.394) IT (.276) 23.5(.925) IT (.276) 20.5(0.807) OR MORE INORMATION CA

38 C_Connectors_C_Connectors.qxd :06 AM Page 7 QUICK SPICE CONNECTORS Connectors QUICK SPICE CONNECTORS A39 PT SERIES All PT Series PTV = TAP PT = 4 AY TAP Terminals and Connectors 902-IDC Operating Temperature: 105 C U ile No. E23438 CSA ile No. R IDC Operating Temperature: 105 C U ile No. E23438 CSA ile No. R IDC Operating Temperature: 105 C U ile No. E23438 CSA ile No. R /905 Operating Temperature: 90 C U ile No. E Operating Temperature: 90 C U ile No. E /952/953 Operating Temperature: 105 C U ile No. E70512 CSA ile No. R32411 PART NUMBER COOUR TYPE O CONNECTION IRE RANGE VOTAGE MAXIMUM INS OD PTV-09 (905) RED T-TAP AG PT-09 RED 4-AY TAP AG PTV-20 (801) BUE T-TAP AG PT-20 BUE 4-AY TAP AG IDC YEO 4-AY TAP / T-TAP AG IDC BRON MAIN / TAP AG / IDC BUE TAP /.250 MAE AG BUE TAP / PARAE AG BACK TAP /.156 MAE BUET AG RED PIGTAI / TAP AG / RED TAP /.250 MAE AG BUE TAP /.250 MAE 14 AG YEO TAP /.250 MAE 12 AG OR MORE INORMATION CA

39 C_Connectors_C_Connectors.qxd :06 AM Page 8 Specialty Connectors BATTERY MODUE CONNECTORS A40 Terminals and Connectors Developed to provide a quick, safe, and reliable way to connect boosting and charging systems. Available in 1, 2, 4, and 6 pole configurations. Housing made from durable polycarbonate and is impact resistant to reduce breakage and provide extended use. Contacts are made from copper with either silver or tin plating for long service life. lammability rating of all housing material: U94V-0 BMC: Battery Module Connectors HOUSING EXAMPE: BMC 1 S - RED Pole Number: 1 - One Pole Housing 2 - Two Pole Housing Colour G - emale Ground MG - Male Ground Housing Size: S - Small Housing M - Medium Housing - arge Housing BMC: Battery Module Connectors CONTACTS EXAMPE: BMC 3 ST ire Range: AG AG AG AG 8-8 AG 14-6 AG 22-4 AG Contact Type: AG - Copper / Silver Plated ST - Copper / Tin Plated (Reel Type) 38-2 AG 60-1/0 AG 70-2/0 AG 80-3/0 AG 100-4/0 AG /300 MCM Amp Series HOUSINGS CONTACTS SIZE (AG) CURRENT VOTAGE MAX. IRE INSUATION DIAMETER (mm) CONTACT RETENTION ORCE (BS) AVG CONNECT/ DISCONNECT (BS) OPERATING TEMP. (ºC) BMC1S-YEO BMC1S-ORANGE BMC1S-RED BMC1S-GREY BMC1S-BUE BMC1S-GREEN BMC1S-BACK BMC1S-BRON BMC1S-PURPE BMC1S-PINK BMC1S-HITE BMC1AG A 600V ºC TO 125ºC BMC2AG A 600V ºC TO 125ºC BMC3ST A 600V ºC TO 125ºC OR MORE INORMATION CA

40 C_Connectors_C_Connectors.qxd :06 AM Page 9 BATTERY MODUE CONNECTORS Specialty Connectors 75 Amp Series HOUSINGS BMC1M-RED BMC1M-BUE BMC1M-HITE BMC1M-GREEN BMC1M-BACK CONTACTS Amp Series SIZE (AG) CURRENT VOTAGE MAX. IRE INSUATION DIAMETER (mm) CONTACT RETENTION ORCE (BS) AVG CONNECT/ DISCONNECT (BS) OPERATING TEMP. (ºC) BMC5AG A 600V ºC TO 125ºC BMC8AG 8 60A 600V ºC TO 125ºC BMC14AG 6 75A 600V ºC TO 125ºC A41 Terminals and Connectors AMP SERIES 50 AMP HOUSINGS CONTACTS SIZE (AG) CURRENT VOTAGE MAX. IRE INSUATION DIAMETER (mm) CONTACT RETENTION ORCE (BS) AVG CONNECT/ DISCONNECT (BS) OPERATING TEMP. (ºC) BMC2S-RED BMC5AG A 600V ºC TO 125ºC BMC2S-BACK BMC2S-BUE BMC8AG 8 45A 600V ºC TO 125ºC BMC2S-GREY BMC14AG 6 50A 600V ºC TO 125ºC 175 AMP BMC2M-RED BMC2M-BUE BMC22AG 4 125A 600V ºC TO 125ºC BMC2M-YEO BMC38AG 2 150A 600V ºC TO 125ºC BMC2M-GREY BMC2M-ORANGE BMC60AG 1/0 175A 600V ºC TO 125ºC 350 AMP BMC2-RED BMC70AG 2/0 250A 600V ºC TO 125ºC BMC2-BUE BMC80AG 3/0 275A 600V ºC TO 125ºC BMC2-YEO BMC100AG BMC2-GREY 4/0 300A 600V ºC TO 125ºC BMC2-ORANGE BMC150AG 250/300 MCM 350A 600V ºC TO 125ºC OR MORE INORMATION CA

41 C_Connectors_C_Connectors.qxd :07 AM Page 10 Specialty Connectors BATTERY MODUE CONNECTORS A42 Powerpole Pak - Multiple Pole Housing Sets 4BMCS-SET- 6BMCS-SET- Terminals and Connectors 4BMCS-SET-R 6BMCS-SET-R 4BMCS-SET-R 6BMCS-SET-R 2X2 4-POE HOUSING PART NUMBER TYPE AMPS 4BMCS-SET- Snap-In Receptacle 10-45A 4BMCS-SET-R Plug w/ atch 10-45A 4BMCS-SET-R Plug w/o atch 10-45A 2X3 6-POE HOUSING PART NUMBER TYPE AMPS 6BMCS-SET- Snap-In Receptacle 10-45A 6BMCS-SET-R Plug w/ atch 10-45A 6BMCS-SET-R Plug w/o atch 10-45A OR MORE INORMATION CA