Fuse Blocks and Holders Fuse Block Technical Data Fuse Blocks 250 Volt E4 600 Volt E5 Cartridge Fuse Pullers Fuse Holders. ATC / Mini Fuse Tabs
|
|
|
- Zoe Jackson
- 5 years ago
- Views:
Transcription
1 BLOCKS AND HOLDERS 1850 Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: Fax: SECTION E BLOCKS AND HOLDERS E1 and Holders Fuse Block Technical Data E2-E3 250 Volt E4 600 Volt E5 Cartridge Fuse Pullers E5 Fuse Holders Panel Mount E6-E10 ATC / Mini Fuse Tabs E10 ETLIN DANIELS reserves the right to discontinue, modify designs and change specifications without incurring obligation. While every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error herein. Copyright 2012 ETLIN DANIELS
2 Fuse Blocks TECHNICAL DATA E2 Fuse Block Cross Reference List ALL DIMENSIONS ARE IN INCHES ITEM NUMBER WIDTH HEIGHT LENGTH F M Z J K X 2V30A V30A CL V30A CL V60A V60A V60A V100A V100A V100A V200A V400A V30A V30A V30A V60A V60A V60A V100A V100A V100A V200A V400A General Information Insulators: Fuse block insulators are molded from thermosetting phenolic material for durability and strength, and are ideally suited for industrial applications. Every block is equipped with mounting pads to compensate for surface irregularities. All blocks have at least two mounting holes to prevent the block from rotating.
3 TECHNICAL DATA Fuse Blocks Fuse Block Cross Reference List by Manufacturer E3 ETLIN NUMBER GOULD NUMBER MARATHON NUMBER 2V30A F30A1S 2V30A F30A2S 2V30A F30A3S 2V60A F60A1B 2V60A F60A2B 2V60A F60A2B 2V100A F100A1B 2V100A F100A2B 2V100A F100A3B 2V200A F200A1B 2V400A F400A1B 6V30A F30A1B 6V30A F30A2B 6V30A F30A3B 6V60A F60A1B 6V60A F60A2B 6V60A F60A3B 6V100A F100A1B 6V100A F100A2B 6V100A F100A3B 6V200A F200A1B 6V400A F400A1B This cross-reference has been prepared to aid in the selection of Etlin materials. Although checked for accuracy, we recommend familiarity with our product before purchase. HB ETLIN CANNOT ASSUME RESPONSIBILITY FOR ERRORS, OMISSIONS OR CHANGES. Etlin have been thoroughly tested and fully CSA approved. Our are made in Canada with Canadian materials, labour and capital. Wire Connectors: Two types of wire connectors are available. The Screw Type can be used with a spade or ring terminal. The Box Type is suitable for either solid or stranded wire. The connectors are tin-plated and CSA approved for either copper or aluminum conductors. Fuse Clips: All fuse clips are one piece high-grade phosphor bronze for excellent conductivity and cool operation.
4 Fuse Blocks 250, 600 VOLT BLOCKS E4 2V60A3 250 Volt ITEM NUMBER POLES VOLTS AMPS CONNECTOR MAXIMUM WIRE STD PACKAGE For dimensions and other specifications, see Technical Data pages preceding. LENGTH WIDTH HEIGHT 2V30A V 30A SCREW 10 AWG V30A V 30A SCREW 10 AWG V30A V 30A SCREW 10 AWG V60A V 60A BOX FT70T 4 AWG V60A V 60A BOX FT70T 4 AWG V60A V 60A BOX FT70T 4 AWG V100A V 100A BOX FT125T 1/0 AWG V100A V 100A BOX FT125T 1/0 AWG V100A V 100A BOX FT125T 1/0 AWG V200A V 200A BOX EO6PT 4/0 AWG V400A V 400A BOX EO7PT 500 MCM
5 600 VOLT BLOCKS, PULLERS Fuse Blocks E5 6V60A2 600 Volt ITEM NUMBER POLES VOLTS AMPS CONNECTOR MAXIMUM WIRE STD PACKAGE QUANTITY 6V30A V 30A BOX FT70T 4 AWG 36 6V30A V 30A BOX FT70T 4 AWG 20 6V30A V 30A BOX FT70T 4 AWG 12 6V60A V 60A BOX FT70T 4 AWG 36 6V60A V 60A BOX FT70T 4 AWG 20 6V60A V 60A BOX FT70T 4 AWG 12 6V100A V 100A BOX FT125T 1/0 AWG 36 6V100A V 100A BOX FT125T 1/0 AWG 20 6V100A V 100A BOX FT125T 1/0 AWG 12 6V200A V 200A BOX EO6PT 4/0 AWG 5 6V400A V 400A BOX EO7PT 500 MCM 2 Cartridge Fuse Pullers ITEM NUMBER FOR DIAMETER LENGTH 56 1/4 TO 1/ /32 TO 13/16 7-1/ TO 2-1/2 12 Cartridge Fuse Pullers Safe Handy Easy to Use Made from insulated laminators of black vulcanized heavy fibre for strength and durability. Makes it easy and safe to remove fuses in even hard to get at fuse blocks. Has a special clamp feature to adjust fuse clips.
6 Fuse Holders PANEL MOUNT HOLDERS E6 Panel Mount Fuseholders Compact through the panel fuseholders are designed to fit a 1/2 hole and be serviceable from the front. Shocksafe and Touchproof. Available in two styles: low profile where there is more space behind the panel; high profile where there is little space behind the panel. R3-9A - Bayonet Type Cap R3-9C - Screw Type Cap R3-11A - Bayonet Type Cap R3-11B - Screw Type Cap They are available in bayonet or screw type knobs with either screwdriver slot head or finger grip knob. Connections are either solder or with quick connect terminals for fast assembly mm Solder Lugs 4.5 mm Maximum ø 5.0 x 20 mm R Screw Type Cap R Screw Type Cap R3-14C - Bayonet Type Cap Solder Lugs Lugs / Tabs Solder Lugs 4.5 mm Maximum 4.5 mm Maximum mm ø 5.0 x 20 mm
7 PANEL MOUNT HOLDERS Fuse Holders Panel Mount Fuseholders (cont d) E7 R Bayonet Type Cap R3-22A - Screw Type Cap R3-28A - Bayonet Type Cap 30A 600V AC Quick Connect Tabs mm mm 15A 250V AC Quick Connect Tabs 4.5 mm Maximum ø 10.3 x 38.1 mm R3-28C- Screw Type Cap R3-32A - In Line Fuseholder R3-32B - In Line Fuseholder 40A 32V DC 30A 32V DC; 20A 32V DC 12 AWG Wire 14 AWG; 16 AWG Wire 4.5 mm Maximum N/A N/A ø 5.2 x 20 mm ø 6.0 x 30 mm; ø 6.3 x 32 mm
8 Fuse Holders PANEL MOUNT HOLDERS E8 Panel Mount Fuseholders (cont d) R Bayonet Type Cap R Screw Type Cap R3-44A - Bayonet Type Cap R3-44C - Screw Type Cap mm 30A 600V AC Quick Connect Tabs mm 15A 250V AC mm ø 10.3 x 38.1 mm R3-44B - Bayonet Type Cap R3-45A R3-45B 15A 250V AC 8A 125/250V AC 15A 125V AC; mm N/A N/A ø 5.0 x 20 mm ø 5.0 x 20 mm
9 PANEL MOUNT HOLDERS Fuse Holders Panel Mount Fuseholders (cont d) E9 R3-46A - Bayonet Type Cap R3-46C - Screw Type Cap R3-46B - Bayonet Type Cap R In Line Fuseholder 15A 250V AC mm 15A 250V AC mm 5A 250V AC Wire N/A ø 5.0 x 20 mm ø 5.0 x 20 mm R3-49A - Bayonet Type Cap R3-49C - Screw Type Cap S S mm
10 Fuse Holders PANEL MOUNT HOLDERS E10 Panel Mount Fuseholders (cont d) 101-R9 101-RR HP-F2D R-403R 7 Hole Multi Fuseholder 108-8R-R 8 Hole Multi Fuseholder
11 TABS Fuse Blocks ATC Fuse Tabs & Mini Fuse Tabs E11 ITEM NUMBER DIMENSIONS TONGUE WIDTH NEMA TAB LENGTH (L) (W) DESCRIPTION in mm in mm in mm FT-ATC ATC TABS FT-ATC ATC TABS FTH-ATC ATC HOLDER FT-LEM LEM TABS FT-AGC AGC TABS 2DM-1DF DOUBLE MALE TAB, SINGLE FEMALE SLIP-IN FT-250-SCT MALE TAB TO SCREW TERMINAL
Planning Low Voltage Layouts
Outdoor_ransformers_Outdoor_ransformers.qxd 11-11-10 3:40 PM Page 1 1850 Wilson Avenue, oronto, Ontario, anada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104 SEION H OUDOOR H1 OUDOOR Low Voltage ransformers
R6F30A1S R6F30A1S 1P 60A 600V Fuse BLK. Features. Long Description
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Clip Type Fuse Current Rating Fuse Type
SECTION H WIRING DUCT WIRING DUCT Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: Fax:
WIRING DUCT 1850 Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104 SECTION H WIRING DUCT H1 Technical Data Slotted - Type P & Type P-VD Slotted - Type HD Solid - Type
Fuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto
Fuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Hatteras Light Pedestals
Hatteras Light Power Pedestal Dimensions Height: 31.00" (787.40 mm) Width: (190.50 mm) Depth: (190.50 mm) Hatteras Light Base Diagram Approximate Weight: 14 lbs. (6.4 kg) 1.73" UL FILE # E133781 Ø0.41
Class H & K Fuse Holders - 250/600 Volt
Class H & K - 250/0 Volt Specifications: Approved for 10,000 Amp Withstand Rating and Short Circuit Current Ratings (SCCR) UL Listed File No. IZLT.E35113 CSA Certified File No. LR21455 RoHS Compliant &
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse-SS Power Pedestals
Lighthouse-SS Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 9.565" (242.95 mm) Depth: 9.875" (250.83 mm) Lighthouse-SS Base Diagram Ø0.50" MOUNTING HOLE (TYP.) 9.5625" 8.0625" 7.3125" C:\Documents
Easy assembly with standard tools. Fully insulated for direct mounting to steel panels
Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series and Receptacles are the proven industry standard
Section 10: Terminal Blocks
Terminal Blocks Section : Terminal Blocks CR151K Resilient Modular Terminal Blocks DIN-rail Mounted Terminal Blocks (CR151K)...-2 Product Tables...-3, -4 Accessories...-3, -4 Technical Data...-5 Outlines
FRNR A 250V TD Class RK5 Dual Elem Fuse-Fusetron
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FRNR225 225A 250V TD Class RK5 Dual Elem Fuse-Fusetron Number Manufacturer Description Weight per unit Product Category
Terminal Blocks. Section 12. Control Catalog 12-1
CR151K Resilient Modular Terminal Blocks CR151C (top) and CR151A Modular Terminal Blocks DIN-rail Mounted Terminal Blocks (CR151K)...12-2 Product Tables...12-3, 12-4 Accessories...12-3, 12-4 Technical
circuit protection & wiring accessories
circuit protection & wiring accessories J J1 circuit breakers Circuit breakers and fuses are a cost-effective solution to protecting wiring, equipment and subsystems. While fuses are a one-time, disposable
Class R 250V and 600V modular ferrule and knifeblade fuse blocks
Technical Data 1048 Class R 2V and 600V modular ferrule and Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with up to four mounting holes per pole
Up to 60 A Class R 250 V and 600 V ferrule power distribution fuse blocks
Technical Data 09 Effective June 06 Up to 60 A Class R 50 V and 600 V ferrule power distribution fuse blocks Catalog symbols: RM5060-_MW_ RM60030-_MW_ RM60060-_MW_ Features and benefits: Combination power
Circuit Breakers/Protection, Fuses/Fuse Products
Circuit Breakers/Protection, Fuses/Fuse Products CRCUT BREAKERS/PROTECTON, PAGES 169-172 FUSES/FUSE PRODUCTS, PAGES 174-182 i Understanding Type 1, Type 2 & Type 3 Circuit Breakers Type 1 Automatic Reset
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
LH600303C 1/10-30A 3P 600V Class H Box Lug Fuse Block
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LH600303C 1/10-30A 3P 600V Class H Box Lug Fuse Block Littelfuse Catalog Number LH600303C Manufacturer Littelfuse Description
CRITO Connection technology. Double and triple T and TCC section busbars
Centre feed unit 5 Centre feed unit Centre feed unit 5 Centre feed unit up to 4000 A combines the advantages of high short-circuit capacity, drill-free mounting, brace terminal technology and clearly structured
Fuseholders. Introduction
Introduction Fuseholders Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals
PH250MQMJ CNTL 250VA 240X X240
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 PH250MQMJ CNTL 250VA 240X480-120X240 Hammond Power Solutions Catalog Number Manufacturer Description Weight per unit Product
Marina Power and Lighting, Inc. General Specifications for the Newport Harbor Mate
Marina Power and Lighting, Inc. General Specifications for the Newport Harbor Mate All Power Pedestals Must Meet the Following: Part I. General: 1.1 General Requirements- A.) Shall be tested and certified
circuit protection & wiring accessories
circuit protection & wiring accessories CIRCUIT BREAKERS P1 P BLOCKS & BUSBARS TERMINAL BLOCKS P2 P3 CONNECTORS, TERMINALS & FUSES P4 CLAMPS, CLEATS, CLIPS & TIES P5 P1 circuit protection & wiring accessories
ELECTRICAL TABLE OF CONTENTS
N ELECTRICAL TABLE OF CONTENTS Electrical Vehicle and Trailer Wiring Codes... N- Trailer Side (Flat & Round) 7-Way Connectors... N- 6-Way Connectors... N- 5-Way Connectors... N- 4-Way Connectors... N-4
Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series
28 Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series 281... Blown fuse indication Exchange of fuse Blown fuse indication by LED or neon lamp Before exchanging the
Ref No: N Date: December 7, Fuseholder Assemblies No. 2. Call us today! See Attachment 1 for Effective Dates.
Ref No: N07-094 Date: December 7, 2007 Fuseholder Assemblies No. 2 See Attachment 1 for Effective Dates. Call us today! We can help you stay on top of changes that will affect your Certification! 1-866-797-4272
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Newport Harbor Mate Utility Center
Newport Harbor Mate Dimensions Height: 14.50" (368.30 mm) Width: 10.50" (266.70 mm) Depth: 10.40" (264.16 mm) Newport Harbor Mate Utility Center Diagram 2.77" Approximate Weight: 11 lbs. (5.0 kg) 10.31"
FUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
Class J modular ferrule and knifeblade fuse blocks
Technical Data10488 SupersedesFebruary 2016 Class J modular ferrule and knifeblade fuse blocks Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with
ICT TRANSFORMERS. Industrial Control Transformers provide a low and safe control voltage for the operation of many electromagnetic devices
ICT TRANSFORMERS Industrial Control Transformers provide a low and safe control voltage for the operation of many electromagnetic devices TA SERIES INDUSTRIAL CONTROL TRANSFORMER Industrial control transformers
Industrial Control Transformers
6 Industrial Control Transformers Section 6 Industrial Control Transformers provide a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids
FUSE & CIRCUIT PROTECTION
15 Order NLINE www.midwestwheel.com CATALOG NUMBER FUSE & CIRCUIT PROTECTION MINI /ATM Blade Fuses A cost-effective standard automotive fuse for use in automotive, battery and general DC applications.
Lighthouse Power Pedestals,
Lighthouse Power Pedestal One of our most popular units, the all-purpose Lighthouse pedestal has a wide range of features. With units in service around the world, this stylish power pedestal is recognized
No-barrier design Self-extinguishing materials Front-connected, back-connected and flush-mounted styles Blades operate independently or can be ganged together Recognized by UL and cul STATES Type have
FUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
Full range of small dimension fast-acting and time-delay fuses. 5x15 mm 5x20 mm IEC 5x20 mm UL 1/4 x 5/8 1/4 x 7/8 1/4 x 1 1/4 x 1-1/4
Electronic, PCB and small dimension fuses 3 Contents Full range of small dimension fast-acting and time-delay fuses 5x15 mm 5x20 mm IEC 5x20 mm UL 1/4 x 5/8 1/4 x 7/8 1/4 x 1 1/4 x 1-1/4 PLUS PCB fuse
General Specifications for Lighthouse Power Pedestal
Dimensions Height: 44.00 11 (1117.60 mm) Width: 13.67" (347.22 mm) Depth: 13.75" (349.25 mm) Lighthou98 Base Diagram ---13,75 1 --- Approximate Weight: 30 lbs. (13.6 kg) Multiply base dimensions by 25.4
Crimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
PROTECTRON P8028 P8029. P8029-C1 (Horizontal Mounting) Panel Mount Fuse Holder For 5 x 20 mm & 6.35 x 32 mm Fuses
P8028 Panel Mount Fuse Holder For 5 x 20 mm & 6.35 x 32 mm Fuses P8028-A - SCREW TYPE P8028-B- BAYONET TYPE Thermoplastic UL94V-0, Black (Tinned) Screw Knob 10A Insulation Resistance 100M W Min at Contact
Contents. Fuses, Circuit Breakers & Consumer Units. Page
Farnell Page 745 Date: 18-08-06 time:17:13 Contents Page 10 x 38mm (1 1 2") HRC Cartridge Fuses & Accessories 766 14 x 51mm HRC Cartridge Fuses and Accessories 766 15.9 x 4.76mm Fuses ( 5 8" x 3 16"),
MAGNUM. Electrical Products. Terminal Blocks / Distribution Blocks / Quick Connect Blocks / Disconnects
MAGNUM Electrical Products Terminal Blocks / Distribution Blocks / Quick Connect Blocks / Disconnects GET CONNECTED WITH US Bussmann Circuit Components Bussmann Circuit Components has the most complete
Full range of small dimension fast-acting and time-delay fuses
Electronic, PCB and small dimension fuses 3 Contents Product Catalog symbol/type Fuses C515, C519 time-delay 5x15mm fuses C518, C520 fast-acting C517 fast acting GDB, S500, S500-V fast-acting IEC 5x20mm
SECTION G STRAIN RELIEF BUSHINGS STRAIN RELIEF BUSHINGS / LIQUID TIGHT
1850 Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104 SECTION G STRAIN RELIEF BUSHINGS G1 Strain Relief / Liquid Tight Strain Relief Type Straight Through Type G2-G5
CENTRE FEED UNIT UP TO 4000A. Safety
CENTRE FEED UNIT UP TO 000A Safety Centre feed unit New TCC section busbar: Connection options with CRITO PowerClip and CRITO ProfiClip, and terminal studs (screw in c-slot). 1-pole, side busbar support
Disconnect & ByPass Switches
Disconnect & ByPass Switches Disconnect & Oil Circuit Recloser Bypass Switches; Regulator & Current Transformer Bypass Switches Electrical Apparatus K-SEC 060 & 090 Contents Type D-73 Distribution Class
Fuse & Switch. BUCHANAN Terminal Blocks. Product Facts High Density Blocks. Fuse Blocks. Switch Blocks. Common Features of 300 & 0300 Series
Fuse & Switch Product Facts High Density n Fuse and Switch rated 15A and 300V. n High Density 0.36" [9.14] centerline spacing saves panel space; at least 33 circuits per foot. Fuse n Provide in-line circuit
STRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
Use Littlites anywhere you need a little light! Gooseneck Lamps & Accessories
Use Littlites anywhere you need a little light! Gooseneck Lamps & Accessories THE FLEXIBLE GOOSENECK LAMP WITH VERSATILITY AND STYLE. AMPSETS High Intensity Low Intensity L-3/12 L-4/18 Detachable Gooseneck
CONNECTORS - SINGLE POLE
CONNECTORS - SINGLE POLE CROCODILE CLIPS DAVID USE PHOTO SD0010 TERMINAL POSTS SOLDER TAGS CRIMP CONNECTORS CRIMPING TOOLS DAVID USE PHOTO SD0010 BOOTLACE FERRULES 2127 CABLE SPLICES 2128 CRIMP CONNECTORS
Single pole connectors
Cam-Lok J-Series E1016 receptacles Cable Size #6 AWG 250 MCM 600V AC/DC, Up to 400A Continuous NEMA 3R J-Series E1016, elastomeric, threaded stud Double cam principle provides a positive, vibration-proof
High barriers Recognized by UL and cul Self-extinguishing materials Nonferrous material Corrosion-resistant nickel finish Safety-grip handle A complete line of switches is available for meter, relay, instrument,
Bulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches. Selection Guide
F Fixed-Depth Flange-Mounted Disconnect Switches Selection Guide F Fixed-Depth Flange-Mounted Disconnect Switches Product Cat. No. 1494F-N Disconnect Switch with Cat. No. 1494F-F Fuse Block Adapter Plate
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CTF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.1 x 15.5 mm
M MA. M MA 125mA M205-2A M MA M MA M MA M MA. M MA 100mA M A 1.6A
Australux 5 x 20mm M205 RATING RATING M205-100MA 100mA M205-1.6A 1.6A M205-125MA 125mA M205- M205-160MA 160mA M205-2. 2. M205-200MA M205-3.1 3.1 M205-250MA M205-4A 4A M205-315MA M205-400MA M205- M205-6.3A
Type SJK Test Switches
Type SJK Test Switches No-barrier design Self-extinguishing materials Front-connected, back-connected and flush-mounted styles Blades operate independently or can be ganged together DESCRIPTION STATES
R49 SERIES TABLE OF CONTENTS
PRODUCT GUIDE R49 SERIES TABLE OF CONTENTS 3 Product Overview 4 Features Spotlight 5 Code Logic 6 Panel Mount Receptacle Female 7 Panel Mount Receptacle Male 8 Cable Mount Receptacle 9 Bulkhead Mount Receptacle
AF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s. High Temperature MgO Elements (RA)...
Page General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s High Temperature MgO Elements (RA).... Leadwire Style RTD s (RB).. Leadwire Style RTD s (RD, RE, RF, or RG
Model Input Input Output DC Output OA H. W. D. VAC Fuse Full Load
5000.00 Air Switch A compact and reliable, enclosed air operated micro-switch for switching rectifiers. Switch meets approved electrical requirements with a rating of 15A @ 115-240 VAC. Operating pressure
Compact Circuit Protector (CCP)
Supersedes April 2014 UL Class CC, CF (CUBEFuse ), Midget and IEC 10x38mm DIN-Rail Contents Description Page Description Page 1-, 2- and 3-Pole Class CC, Midget, 10x38mm Description & Specifications....
R49 & R24 PRODUCT GUIDE
PRODUCT GUIDE Amphenol EEC, Inc. 4050 N Rockwell St Chicago IL 60618 USA P 773.463.8343 F 773.463.8344 W eecchicago.com 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Product Overview Features Spotlight
TECHNICAL INFORMATION
S ECTION Solderless Terminal Construction/Technical Information...-2 Numbering System...-4 Decimal Equivalent Chart...-5 Wire Gauge Conversion...-5 Stud Size Chart...-6 Ring Terminals...-7, 10, 12 Spade
Cam-Lok Single Pole Connectors
Cam-Lok Single Pole Connectors Cooper Interconnect Cam-Lok Single Pole Connectors are specially designed to provide the ultimate in reliable service, even under the most severe operating conditions. These
Master Sets with Foam Tray Organizers
Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)
Circuit Breakers. Excerpt from Master Catalogue. Circuit Breakers. Specifically For You
Circuit Breakers Specifically For You Excerpt from Master Catalogue Circuit Breakers DIN rail mount, thermal/magnetic circuit breakers. Their compact dimensions, ease of mounting and excellent performance
TA Ta VA CTRL-XFRMR
3804 South Street 7964-7263, TX Nacogdoches Phone: 936-69-7941 Fax: 936-60-468 TA2437 Ta-2-437 10VA CTRL-XFRMR Acme Electric Catalog Number TA2437 Manufacturer Acme Electric Description Control Transformer,
Electrical. Hardware & Fastening Solutions. Battery Supplies. J-Case Fuses - Regular... Page 162
Flag Style... Page 156 Electrical Batteries... Page 153 Mounting Pads (Adhesive Backed)... Page 161 Battery Supplies J-Case Fuses - Regular... Page 162 Booster Cable Supplies... Page 153 J-Case Fuses -
Circuit Breaker Types
Circuit Breaker Types Automatic Reset The circuit breaker cycles continuously during an overload condition until the overload is removed or corrected. Modified Reset The circuit breaker contains an additional
SIRCOVER UL1008/98 Changeover switches standards UL and CSA 100 to 1200 A
Conformity to standards (1) Changeover switches svr-ul_14_b_1_cat > EC 6947-3 > UL98, Guide WHTY, file 1138 > UL18, Guide WPYV, file 31792 > CSA 22.2#4, Class 4651-2 (1) Product reference on request. svr_136_a_2_cat
UNIVERSAL SOLAR SYSTEM (USS) USER MANUAL. For Millennium Low Power Gas Detectors or other continuous loads less than 0.
UNIVERSAL SOLAR SYSTEM (USS) USER MANUAL For Millennium Low Power Gas Detectors or other continuous loads less than 0.8 Watts (12 V dc) Part Number: MAN-0048-00 Rev 3 May 2006 IMPORTANT INFORMATION This
High Performance Thermal-Magnetic Circuit Breakers 410/520/
High Performance Thermal-Magnetic Circuit Breakers 0/0/30-... Description Single, double and three pole high performance thermal-magnetic circuit breakers with tease-free, trip-free, snap action mechanism
AC Line / Load Reactors
AC Line / Load Reactors Table of Contents Delivery / Lead Time.PB03-1100 -2 Selection & Pricing PB03-1100 -4 Replacement Parts..PB03-1100-8 Product Modifications / Options..PB03-1100 -9 Product Specifications..PB03-1100
FUSE HOLDERS. 3 Fuses and Fuse Holders / Fuse Holders FUSES SERIES: FUSES SERIES: 03.33
FUSE HOLDERS + 90 0.0-0 FUSES SERIES: 0. Body material: nylon Bayonet type 0.-0 FUSES SERIES: 0. Body material: p.p. Hinged body type Only for,x0 fuses 0.-0 0.-0 FUSES SERIES: 0. Body material: polycarbonate
TB-356/356 S. Conveyor / Stacker INSTRUCTION MANUAL
TB-356/356 S Conveyor / Stacker INSTRUCTION MANUAL Rev. 3/17/04 Part#: M-3027 RENA Systems, Inc. 136 Green Tree Rd Ste 140 PO Box 1069 Oaks, PA 19456-1069 Telephone: 610/650-9170 Fax: 610/650-9171 Every
Blocks and Holders. Specifications. Voltage Rating 600 V Current Rating Based on NEC Table , using 75 C copper wire Material.
6Fuse Blocks and Holders Blocks and Holders Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed
CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ROADWAY LUMINAIRES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 617 SEPTEMBER 1984 CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ROADWAY LUMINAIRES 617.01 SCOPE 617.02 REFERENCES 617.05 MATERIALS TABLE OF CONTENTS
Bulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers
Bulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers Bulletin 1494D Fixed Depth Flange Mounted Circuit Breaker Operating Mechanism Industrial rated circuit breaker operating mechansim pre-assembled
Residential Transition Box. Model RU-1. Specifications. Electrical
Residential Transition Box Model RU-1 Model RU-1 transition box provides a quick, simple, and easy transition between a microinverter trunk cable and stranded wire. Using only a single flathead screwdriver,
NUMBER DESCRIPTION COST SUG. RETAIL. Truck Stuff Speakers. Truck Stuff Radio Knobs. Truck Stuff CB Coax Cable Connectors
NUMBER DESCRIPTION COST SUG. RETAIL Truck Stuff Speakers TSE-01005 Black PA Speaker 8 OHM, 12W PA Horn With Cord And 3.5mm Plug. (Displayed Dimensions: 5.5"H x 5.5"W x 4.75"D) $8.90 EACH $19.99 EACH CASE
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
Specification Grade Insulated Bushings...DA1 Specification Grade Insulated Grounding Bushings...DA2-DA4. Insulating Bushings & Couplings...
SECTION D INDEX Product Description Page Number Specification Grade Insulated Bushings.....................DA Specification Grade Insulated Grounding Bushings........DA2-DA4 Insulating Bushings & Couplings.......................DA-DA6
Bussmann series NH bases
Supersedes October 2013 BUSSMANN Product description Eaton s range has been designed with thermoplastic bodies DIN-Rail and/or screw mounting (size 4 screw mounting only). This range comes with a accessories
Instruction Sheet for Powertite Plug, Connector and Receptacle
330087 Instruction Sheet for Powertite Plug, Connector and Receptacle Powertite 200 Amp Pin & Sleeve Receptacles, Cable Connectors and Plugs: NEMA 4X. 600 Volt AC, 250 Volt DC. Wire Recess Diameter:.687.
Gears & Fuse Gears. American General Purpose Fuses Cylindrical & Blade Fuse Blocks Class H, K & R CLASS H, K AND R FUSE BLOCKS. Ratings.
Ratings Ferraz Shawmut Class H, K and R Fuse Blocks accommodate all Class H, K and R 250 and 600V power fuses. A choice of screw, pressure plate, box and special order stud connectors fit a wide range
...at Altech, of course!
FANTASTIC approved FERRULES...at Altech, of course! Approved for the US & Canadian Market Other great Altech CSA approved products: Miniature Circuit Breakers / Manual Motor Controllers DIN Rail and Panel
LFJ602003C 200A 600V Fus Block
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LFJ602003C 200A 600V Fus Block Littelfuse Catalog Number Manufacturer Description Weight per unit Product Category Descriptions
RMP SERIES INFORMATION GUIDE
RMP SERIES INFORMATION GUIDE DESCRIPTION & DESIGN FEATURES Applications RMP series connectors can be used wherever high amperage connection of AC or DC power is required. Typical applications are the connection
Instructions for Installation, Operation and Maintenance of: "WSRD" Interlocked Receptacles 30, 60 & 100 Ampere
331114-1 INSTRUCTION SHEET Instructions for Installation, Operation and Maintenance of: "WSRD" Interlocked Receptacles 30, 60 & 100 Ampere Read instructions carefully and with full understanding for safe
MDS Dead-front Padmount Switchgear Style Guide 1VAM SG May 2010 Revision D
MDS Dead-front Padmount Switchgear Style Guide 1VAM224804-SG May 2010 Revision D The MDS style guide aids in the proper selection of your style number. When ordering the MDS, the style number must be given
PlexPower Fused Factory Sealed Panelboard with Bus Bar Up to 30 Amps. Stainless Steel Enclosures
Applications The PlexPower panelboard provides indoor and outdoor protection and control of electrical circuits in hazardous environments such as: Petroleum plants Chemical plants Refineries Wastewater
Fuseology. Fuse Holders, Fuse Blocks, Power Distribution Blocks & Surge Suppression. Optima Fuse Holders & Overcurrent Protection Modules.
Fuseology Fuse Holders, Fuse Blocks, Power Distribution Blocks & Surge Suppression Optima Fuse Holders & Overcurrent Protection Modules Compact, full-featured modules that deliver Type 2 coordinated protection,
Fuse Blocks and Clips
PGE Fuse and lock s OMNI-LOK Fuse lock...................................................................................... 484-486 Midget Fuse....................................................................................................
Compact Circuit Protector (CCP)
Supersedes March 2016 BUSSMANN SERIES UL Class CC, CF (CUBEFuse ), midget and IEC 10x38mm DIN-Rail 2011/65/EU Contents Description Page Description Page 1-, 2- and 3-pole Class CC, Midget, 10x38mm Description
Compact Circuit Protector (CCP) 1-, 2- and 3-pole Class CC, Midget, 10x38mm
Supersedes October 2015 BUSSMANN SERIES UL Class CC, CF (CUBEFuse ), midget and IEC 10x38mm DIN-Rail Contents Description Page Description Page 1-, 2- and 3-pole Class CC, Midget, 10x38mm Description and
Westinghouse Electric Corporation Distribution Apparatus Division Bloomington, Indiana 47401
February 26, 1976 Supersedes PL 38-640 dated October 15,1974 Pages 1-8 Prices effective April 29, 1974 Subject to change without notice Selling Policy 38-000 Mailed to E, D, C/1991, 2430/ PL Standard Bill
For the plastics machinery industry Adjustable bayonet thermocouple Model TC47-AB
Electrical temperature measurement For the plastics machinery industry Adjustable bayonet Model TC47-AB WIKA data sheet TE 67.20 Applications Plastics and rubber industry For direct installation into the
Fuse Accessories. Bussmann - Fuse Holders. Fuse Holders
Bussmann - Fuse Holders HLQ UL Recognized, Guide IZLT2, File E14853 CSA Certified, Class 6225-01, File 47235 Fuse and knob are an integral one-piece unit. There are no replacement knobs (caps) HLQ carrier
Introduction Fuseholders. Electroustic Ltd (0)
Introduction Fuseholders Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals