STAINLESS STEEL ENCLOSURES
|
|
- Letitia Goodman
- 5 years ago
- Views:
Transcription
1 Electromechanical components STINLESS STEEL ENCLOSURES GL66 SERIES [ REEFINING STNR ]
2 GL66 LL-MOUNT ENCLOSURES: INGE COVER [ GL66 SERIES STINLESS STEEL ] INGE COVER LL-MOUNT ENCLOSURES Manufactured in Type 304 and 316L stainless steel, these enclosures are ideal for indoor or outdoor applications which require corrosion protection from chemicals and water. The enclosures contain an external body flange to prevent contaminants from entering the enclosure; a strong door with removable hinges; a conductive panel ordered separately and quarter-turn latch with 3 mm double-bit insert for a secure closure. INUSTRY STNRS Mounting brackets required to meet UL/CS external mounting requirements. UL 508 Listed; Type 4, 4X, 12; File No. E61997 cul Listed per CS C22.2 No 94; Type 4, 4X, 12; File No.E61997 NEM/EEMC Type 4, 4X, 12, 13 CS File No : Type 4, 4X, 12 IEC/EN 60529, IP66 IEC/EN 62262, IK10 IEC/EN PPLICTION Food and beverage production Offshore and all saline environments aste and water treatment Packaging Pharmaceutical processing Outdoor environments and corrosive applications SCOPE OF ELIVERY Enclosure with hinged door Gland plate, supplied loose (for items with ) ssembly kit Installation instruction Mounting plate is not included and should be ordered separately FETURES Versions with or without Minimum-width body flange provides maximum body opening External formed 90 degree body flange oor opens 210 degrees Mounting holes in back of body for direct mounting or for optional external mounting brackets oors are easily removed by pulling clip-style hinge pins Quarter-turn latches furnished with 3 mm double-bit insert Self-grounding latch system with double seal Left hinged doors, reversible SPECIFICTIONS Stainless steel wall-mount GL66, IP66, UL/NEM Type 4X enclosure Stainless steel type 304 or type 316L in standard Material thickness: 1,2, 1,5 and 2,0 mm doors; 1,2 and 1,5 mm body Type 316 stainless steel hinge pins Seamless foam-in-place gasket Grounding stud on the body Bonding provision on the door Brushed finish 320 grain For specific accessories, please go to the end of each subsection. For other general accessories, please refer to the chapter ccessories. 2 LL-MOUNT SUBJECT TO CNGE ITOUT NOTICE
3 GL66 LL-MOUNT ENCLOSURES: INGE COVER Elektromechanische Komponenten STNR PROUCT, STINLESS STEEL 304 oor thickness Body thickness Material Gland Plate Q P Type Conductive Mounting Plate M SSE allmount StSt 304 IP66 door NO M300P200GE M SSE allmount StSt 304 IP66 door NO M300P200GE M SSE allmount StSt 304 IP66 door NO M300P250GE M SSE allmount StSt 304 IP66 door NO M300P250GE M SSE allmount StSt 304 IP66 door NO M300P300GE M SSE allmount StSt 304 IP66 door NO M300P300GE M GSSE allmount StSt 304 IP66 door with YES M300P300GE M SSE allmount StSt304 IP66 door NO M400P300GE M GSSE allmount StSt304 IP66 door with YES B M400P300GE M SSE allmount StSt304 IP66 door NO M350P300GE M SSE allmount StSt304 IP66 door NO M400P300GE M GSSE allmount StSt304 IP66 door with YES M400P300GE M SSE allmount StSt304 IP66 door NO M400P400GE M GSSE allmount StSt304 IP66 door with YES B M400P400GE M SSE allmount StSt304 IP66 door NO M600P400GE M SSE allmount StSt304 IP66 door NO M500P400GE M GSSE allmount StSt304 IP66 door with YES B M500P400GE M GSSE allmount StSt304 IP66 door with YES C M500P500GE M GSSE allmount StSt304 IP66 door with YES E M500P500GE M SSE allmount StSt304 IP66 door NO M600P400GE M GSSE allmount StSt304 IP66 door with YES B M600P400GE M GSSE allmount StSt304 IP66 door with YES M600P400GE M SSE allmount StSt304 IP66 door NO M600P600GE M GSSE allmount StSt304 IP66 door with YES C M600P600GE M SSE allmount StSt304 IP66 door NO M600P600GE M GSSE allmount StSt304 IP66 door with YES E M600P600GE M GSSE allmount StSt304 IP66 door with YES E M600P600GE M GSSE allmount StSt304 IP66 door with YES C M700P500GE M SSE allmount StSt304 IP66 door NO M800P600GE M GSSE allmount StSt304 IP66 door with YES C M800P600GE M GSSE allmount StSt304 IP66 door with YES C M800P600GE M SSE allmount StSt304 IP66 door NO M800P600GE M GSSE allmount StSt304 IP66 door with YES E M800P600GE M GSSE allmount StSt304 IP66 door with YES E M800P600GE M GSSE allmount StSt304 IP66 door with YES xB M800P800GE M GSSE allmount StSt304 IP66 door with YES x M800P800GE M SSE allmount StSt304 IP66 door NO M1000P800GE M GSSE allmount StSt304 IP66 door with YES x M1000P800GE M GSSE allmount StSt304 IP66 door with YES x M1200P800GE Q Y-Y 19,1 19,1-38,1 12,5 22,5 B -38,1 OMIT MILE S IF <700 13,5 P 20,5-41 (BOY OPENING) M8 x 1,25 Y 19,4-41 (BOY OPENING) 20,5 Y 28,6-49,8 22,5 13,5 SUBJECT TO CNGE ITOUT NOTICE LL-MOUNT 3
4 GL66 LL-MOUNT ENCLOSURES: INGE COVER STNR PROUCT, STINLESS STEEL 316L oor thickness Body thickness Material Gland Plate Q P Type Conductive Mounting Plate M SS6E allmount StSt 316L IP66 door L NO M300P200GE M SS6E allmount StSt 316L IP66 door L NO M400P300GE M GSS6E allmount StSt 316L IP66 door with L YES M400P300GE M SS6E allmount StSt 316L IP66 door L NO M400P400GE M GSS6E allmount StSt 316L IP66 door with L YES B M400P400GE M SS6E allmount StSt 316L IP66 door L NO M600P400GE M SS6E allmount StSt 316L IP66 door L NO M500P400GE M GSS6E allmount StSt 316L IP66 door with L YES B M500P400GE M GSS6E allmount StSt 316L IP66 door with L YES C M500P500GE M SS6E allmount StSt 316L IP66 door L NO M600P400GE M GSS6E allmount StSt 316L IP66 door with L YES B M600P400GE M SS6E allmount StSt 316L IP66 door L NO M600P600GE M GSS6E allmount StSt 316L IP66 door with L YES C M600P600GE M SS6E allmount StSt 316L IP66 door L NO M600P600GE M GSS6E allmount StSt 316L IP66 door with L YES E M600P600GE M SS6E allmount StSt 316L IP66 door L NO M800P600GE M GSS6E allmount StSt 316L IP66 door with L YES C M800P600GE M SS6E allmount StSt 316L IP66 door L NO M800P600GE M GSS6E allmount StSt 316L IP66 door with L YES E M800P600GE M GSS6E allmount StSt 316L IP66 door with L YES x M800P800GE M SS6E allmount StSt 316L IP66 door L NO M1000P800GE M GSS6E allmount StSt316L IP66 door with GP L YES x M1000P800GE M GSS6E allmount StSt316L IP66 door with GP L YES x M1200P800GE Q Y-Y 19,1 19,1-38,1 12,5 22,5 B -38,1 OMIT MILE S IF <700 13,5 P 20,5-41 (BOY OPENING) M8 x 1,25 Y 19,4-41 (BOY OPENING) 20,5 28,6-49,8 Y 22,5 13,5 4 LL-MOUNT SUBJECT TO CNGE ITOUT NOTICE
5 GL66 LL-MOUNT ENCLOSURES: INGE COVER Elektromechanische Komponenten STNR PROUCT, OVERLPPING OORS, STINLESS STEEL 304, IP55, NEM TYPE 12 oor Thickness Body Thickness Type Gland Plate P Q Conductive Mounting Plate M GSSE GL66 StSt304 C xC M1000P800GE M GSSE GL66 StSt304 C xC M1000P800GE M GSSE GL66 StSt304 C xC M1000P1000GE M GSSE GL66 StSt304 C xC M1000P1200GE M GSSE GL66 StSt304 C xC M1200P1000GE M GSSE GL66 StSt304 C xC M1200P1000GE M GSSE GL66 StSt304 C xC M1200P1200GE M GSSE GL66 StSt304 C xC M1400P1000GE M GSSE GL66 StSt304 C xC M1400P1000GE M GSSE GL66 StSt304 C xC M1400P1200GE 20,5-41 (BOY OPENING) M8 x 1,25 Y , (BOY OPENING) -38, B P Q Y-Y Y SUBJECT TO CNGE ITOUT NOTICE LL-MOUNT 5
6 GL66 LL-MOUNT ENCLOSURES: INGE COVER [ TOP SUN SIEL ] Top sun shield can be mounted at the top of the body after drilling holes in enclosure. Mounting hardware included. Fits to enclosure size x Stainless steel 304 Stainless steel 316L 150x120 M150120TSS M150120TSS6 200x120 M200120TSS M200120TSS6 200x150 M200150TSS M200150TSS6 250x150 M250150TSS M250150TSS6 250x210 M250210TSS M250210TSS6 300x120 M300120TSS M300120TSS6 300x150 M300150TSS M300150TSS6 300x210 M300210TSS M300210TSS6 400x120 M400120TSS M400120TSS6 400x210 M400210TSS M400210TSS6 400x350 M400350TSS M400350TSS6 500x210 M500210TSS M500210TSS6 500x250 M500250TSS M500250TSS6 500x300 M500300TSS M500300TSS6 600x210 M600210TSS M600210TSS6 600x250 M600250TSS M600250TSS6 600x300 M600300TSS M600300TSS6 600x350 M600350TSS M600350TSS6 800x210 M800210TSS M800210TSS6 [ MOUNTING PLTE ] [ IN RIL MOUNTING KIT ] Please purchase panels separately. Mounting panels are conductive 2,0 mm steel. Mounted on M8x1,25 collar studs. Mounting hardware delivered with GL66 enclosure hardware kit. B M300P150GE for GL66 C size 300x150mm M300P200GE for GL66 C size 300x200mm M300P250GE for GL66 C size 300x250mm M300P300GE for GL66 C size 300x300mm M350P300GE for GL66 C size 350x300mm M400P300GE for GL66 C size 400x300mm M400P400GE for GL66 C size 400x400mm M500P400GE for GL66 C size 500x400mm M500P500GE for GL66 C size 500x500mm M600P400GE for GL66 C size 600x400mm M600P600GE for GL66 C size 600x600mm M700P500GE for GL66 C size 700x500mm M800P600GE for GL66 C size 800x600mm M800P800GE for GL66 C size 800x800mm M1000P800GE for GL66 C size 1000x800mm M1000P1000GE for GL66 C size 1000x1000mm M1200P800GE for GL66 C size 1200x800mm M1200P1000GE for GL66 C size 1200x1000mm M1400P800GE for GL66 C size 1200x800mm M1400P1200GE for GL66 C size 1400x1200mm or of enclosure MMK15E IN moun.brackets for GL66 hinged cover 150 MMK20E IN moun.brackets for GL66 hinged cover 200 MMK25E IN moun.brackets for GL66 hinged cover 250 MMK30E IN moun.brackets for GL66 hinged cover 300 MMK35E IN moun.brackets for GL66 hinged cover 350 MMK40E IN moun.brackets for GL66 hinged cover 400 MMK50E IN moun.brackets for GL66 hinged cover 500 MMK60E IN moun.brackets for GL66 hinged cover 600 MMK70E IN moun.brackets for GL66 hinged cover 700 MMK80E IN moun.brackets for GL66 hinged cover 800 MMK100E IN moun.brackets for GL66 hinged cover 1000 MMK120E IN moun.brackets for GL66 hinged cover LL-MOUNT SUBJECT TO CNGE ITOUT NOTICE
7 GL66 LL-MOUNT ENCLOSURES: INGE COVER Elektromechanische Komponenten [ T POCKET ] ata Pockets provide convenient storage for wiring diagrams, operation manuals and other documentation inside an enclosure. Constructed of high-impact thermoplastic, pockets are dark gray and have cutout areas for easy access and visibility to contents. elivered with self-adhesive tape for mounting option without welded studs. P1 P2 Small pocket 152 x 152 mm Large pocket 305 x 305 mm [ OOR STOP KIT ] Enclosures must have a dimension of 400 mm or more. oor Stop Kit can be mounted at the top or bottom of the door opening after drilling two small holes in the body of the enclosure and two small holes in the door. The angle of the door is easily adjusted by means of a wingnut, and the stop arm slides neatly out of the way when the door is closed. STOPK Steel door stop kit STOPKSS6 StSt316 door stop kit [ LL-MOUNTING BRCKETS ] Mounting-Bracket Kits are field-installable. Stainless steel brackets are rated to Type 4X. Set of four brackets can support 220 kg maximum load. ll hardware is included. Four brackets per kit. CMFK CMFKSS Galvanized w.m. brackets for GL66 C StSt304 w.m. brackets for GL66 C [ LOCK INSERTS ] Lock inserts are field-installable. Stainless steel material and different key locking systems provide maximum protection for your equipment. MKSM7SS MKSM7SS6 MKT8SS MKT8SS6 MKB5SS MKB5SS6 StSt304 square 7 mm StSt316 square 7 mm StSt304 triangle 8 mm StSt316 triangle 8 mm StSt304 double bit 5 mm StSt316 double bit 5 mm [ KIT ] Grounding Kit provides means to attach a grounding conductor to the enclosure. Kit inludes two insulated copper wires with a ring terminal at each end, all installation hardware and instructions Grounding kit Packs of 5 pc. Cu wires, green/yellow. SUBJECT TO CNGE ITOUT NOTICE LL-MOUNT 7
8 GL66 LL-MOUNT ENCLOSURES: SCRE COVER [ GL66 SERIES STINLESS STEEL ] SCRE COVER LL-MOUNT ENCLOSURES INUSTRY STNRS Mounting brackets required to meet UL/CS external mounting requirements. UL 508 Listed; Type 4, 4X, 12; File No. E61997 cul Listed per CS C22.2 No 94; Type 4, 4X, 12; File No. E61997 NEM/EEMC Type 4, 4X, 12 CS File No : Type 4, 4X, 12 IEC/EN 60529, IP66 IEC/EN 62262, IK10 IEC/EN PPLICTION Food and beverage production Offshore and all saline environments aste and water treatment Packaging Pharmaceutical processing Outdoor environments and corrosive applications FETURES Captivated Type 316 stainless steel cover screws with sealing bushings made of a durable composite material Integral compression stops maintain optimal gasket compression SPECIFICTIONS Stainless steel wall-mount GL66, IP66, UL/NEM Type 4X enclosure Stainless steel type 304 or type 316L in standard Material thickness: 1,2 mm covers and 1,0 mm bodies Seams continuously welded and ground smooth External formed body flange trough Fastening holes in back of body for direct mounting or optional external mounting brackets Seamless foam-in-place gasket M6 bonding provision on cover, M6 ground stud in body Cover and body have 320 grain brushed finish SCOPE OF ELIVERY Enclosure Cover ssembly kit Installation instruction Mounting panels or IN rail must be ordered separately For specific accessories, please go to the end of each subsection. For other general accessories, please refer to the chapter ccessories. 8 LL-MOUNT SUBJECT TO CNGE ITOUT NOTICE
9 GL66 LL-MOUNT ENCLOSURES: SCRE COVER Elektromechanische Komponenten STNR PROUCT Material Conductive Mounting Plate MSC SSE allmount StSt 304 IP66 Screw cover MSC150P150GE MSC SSE allmount StSt 304 IP66 Screw cover MSC150P150GE MSC SSE allmount StSt 304 IP66 Screw cover MSC300P150GE MSC SSE allmount StSt 304 IP66 Screw cover MSC200P150GE MSC SSE allmount StSt 304 IP66 Screw cover MSC200P200GE MSC SSE allmount StSt 304 IP66 Screw cover MSC200P200GE MSC SSE allmount StSt 304 IP66 Screw cover MSC300P200GE MSC SSE allmount StSt 304 IP66 Screw cover MSC300P200GE MSC SSE allmount StSt 304 IP66 Screw cover MSC400P200GE MSC SSE allmount StSt 304 IP66 Screw cover MSC400P200GE MSC SSE allmount StSt 304 IP66 Screw cover MSC250P200GE MSC SSE allmount StSt 304 IP66 Screw cover MSC300P300GE MSC SSE allmount StSt 304 IP66 Screw cover MSC400P300GE MSC SS6E allmount StSt 316L IP66 Screw cover L MSC150P150GE MSC SS6E allmount StSt 316L IP66 Screw cover L MSC200P150GE MSC SS6E allmount StSt 316L IP66 Screw cover L MSC300P200GE MSC SS6E allmount StSt 316L IP66 Screw cover L MSC250P200GE MSC SS6E allmount StSt3 16L IP66 Screw cover L MSC300P300GE Y-Y , ,7 Y 8.8 B -16,1 (OPENING) M5-18,4-16,1 (OPENING) Y 8,8-16 NOTES Panel screws are M5-0,8 pan head Panels are 2,0 mm conductive steel Rear mounting holes will accommodate M6-1,0 mounting screws SUBJECT TO CNGE ITOUT NOTICE LL-MOUNT 9
10 GL66 LL-MOUNT ENCLOSURES: SCRE COVER [ MOUNTING PLTE ] Mounting plate is not included and should be ordered separately MSC150P150GE MSC200P150GE MSC200P200GE MSC250P200GE MSC300P150GE MSC300P200GE MSC300P300GE MSC400P200GE MSC400P300GE MPL for GL66 SC size 150x150 mm MPL for GL66 SC size 200x150 mm MPL for GL66 SC size 200x200 mm MPL for GL66 SC size 250x200 mm MPL for GL66 SC size 300x150 mm MPL for GL66 SC size 300x200 mm MPL for GL66 SC size 300x300 mm MPL for GL66 SC size 400x200 mm MPL for GL66 SC size 400x300 mm B 132,5 132,5 182,5 132,5 182,5 182,5 232,5 182,5 282,5 132,5 282,5 182,5 282,5 282,5 382,5 182,5 382,5 282,5 [ IN RIL MOUNTING KIT ] Use as a mounting framework to install IN rails or a panel. Bracket is offset for additional space in front of or behind mounted equipment. Mounting hardware included. Item number LMK15E IN moun.brackets for GL66 SC 150 LMK20E IN moun.brackets for GL66 SC 200 LMK25E IN moun.brackets for GL66 SC 250 LMK30E IN moun.brackets for GL66 SC 300 LMK40E IN moun.brackets for GL66 SC 400 or of enclosure [ LL-MOUNTING BRCKETS ] Kit is field-installable. ardware included. Four brackets per kit LMFKSS SS304 w.m. brackets for GL66 SC 10 LL-MOUNT SUBJECT TO CNGE ITOUT NOTICE
11 NOTES: SUBJECT TO CNGE ITOUT NOTICE LL-MOUNT 11
12 FREE-STN ENCLOSURES [ 30S4E FREE-STN SINGLE N UL CCESS ENCLOSURE ] Free-stand enclosure has been specially designed for heavy duty applications housing systems with large components or complex mounting configurations in harsh environments. Three-point latching and sealing provide industry-leading protection from dust, dirt, oil and water. The enclosure is for housing motor starters, drives, contactors and PLCs, as well as a wide variety of other electrical and electronic equipment. The design with double access is ideally suited for the mounting of physically large, heavy duty devices where tight sealing (IP) and rigidity (IK) are important. INUSTRY STNRS IEC EN 60529, IP66 IEC EN 50102, IK10 IEC EN 62208; UL 508 Listed; Type 4, 4X, 12 File No. E61997 NEM Type 4, 4X, 12 PPLICTION Oil and gas Pulp and paper Chemical Food and beverage Pharmaceutical Textile and similar industries SCOPE OF ELIVERY Enclosure Plinth base kit, supplied loose ssembly kit Installation instruction FETURES Two-door enclosures are provided with a removable centerpost for easy mounting plate installation Seamless foam-in-place polyurethane gasket assures a watertight and dust-tight seal igh-impact thermoplastic data pocket provided with each enclosure Base plinth 100 mm included, with front and rear removable cover for easy cable entry SPECIFICTIONS Thickness 2,5 mm, stainless steel type ISI 304 (EN ) or 316L (1.4404) External surface body and door brushed finish grain 240, Ra 0,8 µm, smooth internal surface (2B) eavy-duty three-point latching mechanism operated by Type 316L stainless steel POERGLIE padlocking handle Seams continuously welded and ground smooth Body grounding, studs door and body Bottom s, 3,0 mm removable from inside, with grounding stud oor opening angle 100 For specific accessories, please go to the end of each subsection. For other general accessories, please refer to the chapter ccessories. 12 FREE-STN SUBJECT TO CNGE ITOUT NOTICE
13 FREE-STN ENCLOSURES Elektromechanische Komponenten STNR PROUCT; SINGLE CCESS Material F G Mounting Plate 2066SSFS 2066SSFS IP66 StSt304 with plinth P6F1GE 2086SSFS 2086SSFS IP66 StSt304 with plinth P8F1GE 20106SSFS 20106SSFS IP66 StSt304 with plinth P10F1GE 20126SSFS 20126SSFS IP66 StSt304 with plinth P12F1GE 2068SSFS 2068SSFS IP66 StSt304 with plinth P6F1GE 2088SSFS 2088SSFS IP66 StSt304 with plinth P8F1GE 20128SSFS 20128SSFS IP66 StSt304 with plinth P12F1GE 20168SSFS 20168SSFS IP66 StSt304 with plinth P16F1GE 1864SSFS 1864SSFS IP66 StSt304 with plinth P6F1GE 1884SSFS 1884SSFS IP66 StSt304 with plinth P8F1GE 18104SSFS 18104SSFS IP66 StSt304 with plinth P10F1GE 18124SSFS 18124SSFS IP66 StSt304 with plinth P12F1GE 1866SSFS 1866SSFS IP66 StSt304 with plinth P6F1GE 1886SSFS 1886SSFS IP66 StSt304 with plinth P8F1GE 18106SSFS 18106SSFS IP66 StSt304 with plinth P10F1GE 18126SSFS 18126SSFS IP66 StSt304 with plinth P12F1GE 2088SS6FS 2088SS6FS IP66 StSt316L with plinth 316L P8F1GE * double door with centerpost SIZE 63,9-128,6 64,7 2,4-20,3 17,9 44,5 OOR - 171,5 85,7 85,7-88,9 72,8 BOY 44,5 100,0 64,7-128,6 63,9 2,4 /2-24,5 /2-24,5 2,4 44,5-171,5 85,7 OOR 85,7 /2-88,2 BOY 87,5 68,4 OOR LIGT CNNEL 100,0 BOY 181,0 F 67,5 29,2 LIGT CNNEL 51,7 CENTER SUPPORT (only for double door) 22,2 FULL PNEL 22,2 7,00 GN OLE LF PNEL B Usable space: - 88,9 B - 88,9 100,2 100,2 51,7 G G REMOVBLE CENTERPOST SUBJECT TO CNGE ITOUT NOTICE FREE-STN 13
14 FREE-STN ENCLOSURES STNR PROUCT; UL CCESS Material F G Mounting Plate 2088SSFS 2088SSFS IP66 StSt304 with plinth P8F1GE 20108SSFS 20108SSFS IP66 StSt304 with plinth P10F1GE 20128SSFS 20128SSFS IP66 StSt304 with plinth P12F1GE 20168SSFS 20168SSFS IP66 StSt304 with plinth P16F1GE 2088SS6FS 2088SS6FS IP66 StSt316L with plinth 316L P8F1GE 20108SS6FS 20108SS6FS IP66 StSt316L with plinth 316L P10F1GE 20128SS6FS 20128SS6FS IP66 StSt316L with plinth 316L P12F1GE 20168SS6FS 20168SS6FS IP66 StSt316L with plinth 316L P16F1GE * double door with centerpost SIZE 63,9-128,6 64,7 2,4-20,3 17,9 44,5 OOR - 171,5 85,7 85,7-88,9 72,8 BOY 44,5 100,0 64,7-128,6 63,9 2,4 /2-24,5 /2-24,5 2,4 44,5-171,5 85,7 OOR 85,7 /2-88,2 BOY 87,5 68,4 OOR LIGT CNNEL 100,0 BOY 67,5 29,2 181,0 F 51,7 CENTER SUPPORT (only for double door) 22,2 FULL PNEL 22,2 7,00 GN OLE LF PNEL B Usable space: - 88,9 B - 88,9 100,2 100,2 51,7 G G REMOVBLE CENTERPOST 14 FREE-STN SUBJECT TO CNGE ITOUT NOTICE
15 FREE-STN ENCLOSURES Elektromechanische Komponenten [ MOUNTING PLTES ] For cabinet sizes x B 20P6F1GE 20P6F1GE Full mounting plate 2000x ,6 496,7 20P8F1GE 20P8F1GE Full mounting plate 2000x ,6 696,7 20P10F1GE 20P10F1GE Full mounting plate 2000x ,6 896,7 20P12F1GE 20P12F1GE Full mounting plate 2000x ,6 1096,7 20P16F1GE 20P16F1GE Full mounting plate 2000x ,6 1462,5 18P6F1GE 18P6F1GE Full mounting plate 1800x ,6 496,7 18P8F1GE 18P8F1GE Full mounting plate 1800x ,6 696,7 18P10F1GE 18P10F1GE Full mounting plate 1800x ,6 896,7 18P12F1GE 18P12F1GE Full mounting plate 1800x ,6 1096,7 [ SIE MOUNTING PLTES ] Mounting Plates provide extra mounting space on the sides of enclosures. 2,5 mm plates are steel with a conductive, corrosion-resistant coating. Mounting Plates attach securely to mounting channels. Plated steel mounting hardware is furnished. 20SMP3GE 20SMP4GE 20SMP5GE 20SMP6GE 18SMP3GE 18SMP4GE 18SMP5GE 18SMP6GE 30S4E side mounting plate 2000x300 30S4E side mounting plate 2000x400 30S4E side mounting plate 2000x500 30S4E side mounting plate 2000x600 30S4E side mounting plate 1800x300 30S4E side mounting plate 1800x400 30S4E side mounting plate 1800x500 30S4E side mounting plate 1800x600 E 1943, , , , , , , ,8 600 [ LIFTING EYES ] Lifting Eyes are used for lifting freestand unibody enclosure. Lifting Eyes thread into welded nuts in enclosure s body and are designed for overhead lifting in conjunction with shackles and a spreader bar. Use of shackles instead of hooks is preferred. The angle between the top of the enclosure and the cable or chain must be at least 45. Use only slings and spreader bars that are designed for the specific application and are in compliance with regulations established by OS, SME, IS, STM and other governing agencies. PLEM20SS (4) Lifting Eyes Stainless steel 304 PLEM20SS6 (4) Lifting Eyes Stainless steel 316L SUBJECT TO CNGE ITOUT NOTICE FREE-STN 15
16 FREE-STN ENCLOSURES [ LRGE ENCLOSURE OOR STOP KIT ] esigned for use with most standard, large mild and stainless steel enclosures to secure the door in the 90 degree open position. oor Stop Kit can be mounted at the top or bottom of the door opening after drilling two small holes in the door and enclosure. ll parts are plated. Maintains UL/CS Type 4 and Type 12 if properly installed in a offman enclosure. LGSTOP2E Large Enclosure oor Stop Kit [ SOLR SIELS ] Material 6040SSTSE Solar shield for enclosure 600 x 400mm Stainless steel SS6TSE Solar shield for enclosure 600 x 400mm Stainless steel 316L 8040SSTSE Solar shield for enclosure 800 x 400mm Stainless steel SS6TSE Solar shield for enclosure 800 x 400mm Stainless steel 316L 10040SSTSE Solar shield for enclosure 1000 x 400mm Stainless steel SS6TSE Solar shield for enclosure 1000 x 400mm Stainless steel 316L 6060SSTSE Solar shield for enclosure 600 x 600mm Stainless steel SS6TSE Solar shield for enclosure 600 x 600mm Stainless steel 316L 8060SSTSE Solar shield for enclosure 800 x 600mm Stainless steel SS6TSE Solar shield for enclosure 800 x 600mm Stainless steel 316L 10060SSTSE Solar shield for enclosure 1000 x 600mm Stainless steel SS6TSE Solar shield for enclosure 1000 x 600mm Stainless steel 316L 8080SSTSE Solar shield for enclosure 800 x 800mm Stainless steel SS6TSE Solar shield for enclosure 800 x 800mm Stainless steel 316L 10080SSTSE Solar shield for enclosure 1000 x 800mm Stainless steel SS6TSE Solar shield for enclosure 1000 x 800mm Stainless steel 316L [ SING-OUT RCK MOUNTING FRMES ] Full-length 3,0 mm thickness swing-out rack mounting frames are available for mounting 19-in. (483 mm) rack mounting equipment. The frame pivots within the enclosure to allow access to the back of the mounted equipment. The frames can be installed in 2000 mm and 1800 mm high enclosures that are 800 mm wide. Complies with NSI/EI RS-310- rack-mounting standards. The design features smooth operation and secure positioning anywhere along the horizontal mounting channels. Frame swings from the left side. ll frames are textured RL7035 and furnished with plated mounting hardware. Fits to enclosure size x 188SOF19E 1800 x SOF19E 2000 x Number of Units 16 FREE-STN SUBJECT TO CNGE ITOUT NOTICE
17 FREE-STN ENCLOSURES Elektromechanische Komponenten [ 19-IN. RCK NGLES ] Square-ole Rack ngles are 2,0 mm plated steel designed to accept metric or English cage nuts. 19-in. Rack ngles are fixed directly into a 600 mm wide enclosure s channels. To mount 19-in. Rack ngles in 800 mm wide enclosure, use frame reducing brackets. To mount 19-in. Rack ngles in 1200 mm wide enclosure, use center supports. Fits to enclosure size x ole 18R19TE 1800 x 600 Square 36 20R19TE 2000 x 600 Square 40 Number of Units [ CENTER SUPPORTS ] Center supports permit the installation of 19-in. rack angles in double door enclosures with width 1200 mm. The Center Supports can be positioned from front to back of the enclosure. Fits to enclosure size x x x 1200 [ IT REUCING BRCKETS ] idth Reducing Brackets mount directly to 800 mm wide enclosure. Converts 800 mm wide enclosure to 600 mm wide, allowing 19-in. rack angles to fit. Furnished in sets of pair 2,5 mm thick plated steel. Mounting hardware is included. Converts enclosure width From 800 to 600 SUBJECT TO CNGE ITOUT NOTICE FREE-STN 17
18 B bfahrt 24 aiger/burbach B 277 NR B 54 Industriegebiet am Siegerland Flughafen ELMEKO essen Rheinland-Pfalz ELMEKO Gmb + Co. KG Graf-Zeppelin-Str Liebenscheid Tel / info@elmeko.de
STAINLESS STEEL ENCLOSURES EQUIPMENT PROTECTION
STAINLESS STEEL ENCLOSURES EQUIPMENT PROTECTION A SUPERIOR CORROSION PROTECTION SOLUTION offman stainless steel enclosures are designed for indoor or outdoor applications that require corrosion protection
More informationGL66 SERIES STAINLESS STEEL HINGED COVER WALL-MOUNT ENCLOSURES
GL66 SERIES STAINLESS STEEL INGED COVER ALL-MOUNT ENCLOSURES Aesthetic styling and an attractive, stroked finish make GL66STE enclosures an excellent choice when style and functionality are important.
More informationWall-Mount Enclosures
Wall-Mount Enclosures Protection When Safety Matters Most When selecting an enclosure, application can be associated with market or product. For example, is your enclosure going to be used in a petrochemical
More information[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]
[ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins
More informationHeavy-Duty Enclosures Type 12 Free Standing Disconnect with Sub Panel
eavy-uty Enclosures PPLICTIONS - esigned to provide protection for electrical instruments, terminals, and controls from dust, oil, dirt and dripping liquids. CONSTRUCTION - abricated from 10 gauge carbon
More informationHOFFMAN FS66S TYPE 4X STAINLESS STEEL FREE-STAND ENCLOSURE
MGDC BS Draft 4 30-07-2014 HOFFMAN FS66S TYPE 4X STAINLESS STEEL FREE-STAND ENCLOSURE The latest Hoffman-branded enclosure from Pentair has been specially designed for housing systems with large components
More informationType 4X Panel Enclosures
Ground-Mount Enclosures Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing
More informationType 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
More informationType 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
More informationType 4 Panel Enclosures
Ground-Mount Enclosures Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Easy access panels or
More informationRack Mount devices shown not included Custom cabinet shown
763.422.2588 SPEC-00215 M763.422.2661 NETWORKING OUTSIDE PLANT PRODUCTS COMLINE OSP WALL-MOUNT CABINET PACKAGE AND ACCESSORIES Outside Plant Products COMLINE OSP Wall-Mount Cabinet Package and Accessories
More informationStandards IEC IEC 529 Rated IP66-9 EN EN Mounting frame: removable predrilled reinforced DIN-rails
Features - The range is available in seven sizes, ranging from 12" x 8" to 40" x 32". - The cabinets are made of beige (RL 7032) hot molded fiberglass reinforced polyester, dyed in mass. The enclosure
More informationStandard Product. Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories
Spec-00144 Wall-Mount Cabinets ULTRX Fiberglass Type 4X WiFi Cabinet and Accessories ULTRX WiFi, Type 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cul Listed per CSA C22.2
More informationPhone: Fax: Web: -
empire SERIES For your largest applications, turn to the Empire Series from Allied Moulded. Fiberglass construction offers durability and strength without the excessive weight of a comparable metal enclosure.
More informationType 4 Panel Enclosures
Wall-Mount Enclosures Type 4 Premier Series with Quarter-Turn Latches Data Sheet and Catalog Number Accessories Premier panels NEMA panel adapters Depth adjustment brackets Print pockets Padlockable or
More informationType 4 X Panel Enclosures
Ground-Mount s Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing out frames
More informationDisconnect Enclosures
Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508
More informationPanel Size. Conductive
Spec-00402 ULTRX, Type 4X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E697 cul Listed per CSA C22.2
More informationULTRX, Type 4X. Panel Size. Conductive
Spec-00402 EPH FX (763) 422-2600 422-21 Non-Metallic Fiberglass Industry Standards Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File
More informationOperator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
More informationModular Enclosure Solutions Specifier s Guide
Modular Enclosure Solutions Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 1 The Next Generation Modular Enclosure Stronger. Faster. Easier. You ve already spent tens of thousands
More informationJunction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety
JBES Series Medium Voltage 11 kv ECES Series Compliance Data: ATEX - IEC: ATEX IEC CE Ex e II Ex ia IIC; Ex ib IIC T6 to T4 Ex td A21 T80 C to T130 C Ex de IIC; Ex demb IIC Operating Temperatures: -50
More informationStandard Product. Type 4 Free-Stand Enclosures and Accessories
763.422.2600 Spec-00294 F763.422.2211 Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand, Type 4 INDUSTRY STANDARDS
More informationWall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
More informationType 12 / 13 Enclosures
Type 12 Free-Standing Enclosures ata Sheet pplication Houses electrical controls and instruments Easy access fixed or swing panels for optional equipment ual-access construction available for back-to-back
More informationFREE-STANDING ENCLOSURE ACCESSORIES FREE-STANDING ENCLOSURE ACCESSORIES. Swing-Out Panels. Panels (Full & Half Length) For Single-Door Enclosures
118 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 11 ENCLOSURE Panels (Full & Half Length) For Single-Door Enclosures Panels for single-door enclosures can
More informationC OMMERCIAL SOLUTIONS
OMMERIL SOLUTIONS asic luminum Outdoor s... OM 1-2 Small Type I allmount s... OM 3 Large Type I allmount s... OM 4 Small inge over oxes... OM 5 Large inge over oxes... OM 6 Lay-In Type I ireway... OM 7-8
More informationCONCEPT Accessories. Catalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in.
Spec-00186 KPH FX (763) 422-2600 422-2211 Accessories CONCEPT Accessories Accessories: CONCEPT Conversion Kit Conversion Kit adapts enclosure for mounting standard NEMAstyle panels in CONCEPT enclosures.
More informationSERIES 14 SINGLE DOOR CONSOLES TECHNICAL DATA
Operator System Enclosures 1 12 SAGINAW CONTROL ENGINEERING STOCK PRICE LIST SAGINAW CONTROL ENGINEERING STOCK PRICE LIST 13 Series 1 Single Door Consoles Application - Designed for electronic controls
More informationINDUSTRIAL SOLUTIONS Wallmount Enclosures...pgs IND 1-46 Wireway/Trough...pgs IND Freestanding Enclosures...pgs IND FMD Enclosures...
INDUSTRIL SOLUTIONS Wallmount s...pgs IND 1-46 Wireway/Trough...pgs IND 47-60 Freestanding s...pgs IND 61-72 FMD s...pgs IND 73-86 Operator Interface...pgs IND 87-136 Noncorrosive...pgs IND 137-193 I N
More informationCable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
More informationStandard Product Low Profile Type 12 One-Door Disconnect Enclosures
763.422.2600 Spec-00005 M763.422.2211 Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Low-Profile, One- to Five-Door
More informationCONCEPT Wall-Mount Enclosure Accessories
CONCEPT Wall-Mount Enclosure Accessories The CONCEPT Enclosure Group Accessory Selection Guide Steel section 4 or Stainless Steel Enclosures section 6 Steel section 4 or Stainless Steel Window-Door Enclosures
More informationACCESSORIES Electric Heater Compact Cooling Fans Floor Stand Kit PANELITE Enclosure Lights BULLETIN: A28SX
763.422.26 SPEC-177 B763.422.2211 DISCONNECT SEQUESTR PREFERRED-CUTOUT DISCONNECTS SEQUESTR EXTERNAL DISCONNECTS SEQUESTR PrefERREd-CutoUT DisconnECTS SEQUESTR ExTERnal Disconnects STAINLESS STEEL SEQUESTR
More informationPanel, 18.20x14.20, Bulletin CWP (CONCEPT Enclosure Panels),
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Material Material, Color, and Finish
More informationEQUIPMENT PROTECTION
Contractor Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 8 Hoffman Has You Covered From utility junctions to protecting relays, contactors and wire, Hoffman has you covered.
More informationFree-Stand, Single or Dual Access, Type 12
Spec-00291 ree-stand Enclosures Type 12 ree-stand Enclosures ree-stand, Single or Dual Access, Type 12 INDUSTRY STANDARDS UL 508A Listed; Type 12; ile No. E61997 cul Listed per CSA C22.2 No. 94; Type 12;
More informationOperator System Enclosures
27 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 Operator Systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC s, monitors,
More informationBlind and Polycarbonate Cases FQ Series: stainless steel cases with single door
Series Smart 22 Series Smart Blind and Polycarbonate Cases FQ Series: stainless steel cases with single door The Smart series is the proposal for boxes with and witout inner door for small and medium sized
More informationCatalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in. (762 x 762 mm)
SPEC-00186 CONCEPT Accessories CONCEPT Accessories CONCEPT PANEL CONVERSION KIT Conversion Kit adapts enclosure for mounting standard NEMA-style panels in CONCEPT enclosures. Bracket attaches to rear collar
More informationNetworking: Wall-Mount Cabinets PROTEK Wall-Mount and Double-Hinge Cabinets PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1
PROTEK Single-Door Fan and Filter Thermal Packages, UL and NEMA Type 1 Industry Standards UL 508A Listed; Type 1; File Number E619967 cul Listed per CSA C22.2 No. 9; Type 1; File Number E61997 NEMA / EEMAC:
More informationType 4X Panel Enclosures
Type 4 s Type 4 s Type 4 Single-Door Data and Illustration Sheet Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
More informationACCESSORIES FOR SZE2 CABINETS
ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked
More informationChapter Contents. Outside Plant Products
PH FX (763) 422-2588 422-2661 : Chapter Contents Outside Plant Products COMLINE Wall-Mount Enclosures and Accessories COMLINE, Type 4X................................................ 2 Mounting Panel...................................................
More informationNEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series
NEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series Applications SN4 Series Designed to house the following: Allen-Bradley Bulletin 1494V disconnect switches with flange-mounted variable
More informationDisconnect Enclosures
Wall-Mount Enclosures Type 12 Flange-Mount....................................................................... 296-298 Wall-Mount Enclosures Type 4 & 4X Premier Series 2-Point or 3-Point Locking..........................
More informationHuman Machine Interface Console Range Modular MPC
Console Range Modular MPC IP 66 TYPE, 12, 13 IK 10 (single door); IP 55 TYPE 12, 13 IK 10 (double door) 36 Product Catalogue 0 Material: ody and door: 1.5 mm mild steel. Rear panel: 1.5 mm mild steel.
More informationRittal The System. Rittal JB and WM Specification Guide. Faster Better Worldwide. JB and WM Industrial Wallmount Enclosures and Accessories
Rittal The System. Faster Better orldwide. Rittal JB and M Specification Guide JB and M Industrial allmount Enclosures and Accessories hy Choose Rittal? Rittal understands the challenges faced every day
More informationTypical Uses. Heavy-duty power connection
Spec-039 Power and Ground Connections Power and Ground Connections Overview Power and Ground Connections Product Overview Product Range Typical Uses Typical Market Copper s Connecting Clamps eavy-duty
More informationPH (763) FX (763) hoffmanonline.com
PH (763) 422-2211 FX (763) 422-2600 : 1 ContractorType 1 Chapter Contents Screw-Cover Type 1 Pull Boxes and Accessories Screw-Cover, Type 1............................................... 3 Type 1 Pull
More informationPreferred Cutout, Disconnect Enclosure, Type 12
763.422.2600 Spec-00245 J763.422.2211 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Preferred Cutout, Enclosure, Type 12 INDUSTRY
More informationC-Box Screw Cover with Knockouts NEMA 1. Commercial Enclosures Junction Boxes
C-Box Screw Cover with Knockouts Application Designed for general purpose indoor commercial use as a junction, pull or switch box. Standards UL-50 Type 1 cul Type 1 Complies with: NEMA Type 1 IEC 60529,
More informationWall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type 12
763.422.2600 SPEC-00245 L763.422.2211 DISCONNECT WALL-MOUNT PREFERRED-CUTOUT DISCONNECTS PREFERRED CUTOUT, DISCONNECTS, TYPE 12 Wall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type
More informationGuides (s-3482) Slides (s-2568) Rack-Mount Accessories. Accessories: Mounting Accessories
Spec-00500 D(763) 422-2211 422-2600 Accessories Mounting Accessories Guides (s-3482) 14 gauge steel chassis guides mount between two pairs of rackmounting angles that have accessory mounting legs. Guides
More information19 floor rack with steel door
2015 Telecommunication rack systems HETEL 1 19 floor rack with steel door Rack width 600 mm Rack width 800mm General features include a metal frame, 19 rails, roof, side and rear panels, door and plinth
More informationPROLINE Sloped-Front HMI System and Accessories. PROLINE Sloped-Front HMI, Type 4, 4X, 12. HMI - Human-Machine Interface: HMI Enclosure Systems
Spec-00338 FPH FX (763) 422-2600 422-2211 HMI - Human-Machine Interface HMI Enclosure Systems PROLINE Sloped-Front HMI, Type 4, 4X, 12 Industry Standards Painted versions: UL 508A Listed; Type 12: File
More informationIntroduction. Features. Intelligent Technologies Motor Control Center Structures
Intelligent Technologies Technical Data New Information Description Page Intelligent Technologies General............................................. 2 s.......................................................
More informationCONNECT AND PROTECT. ProLine G2. The Next Generation Modular Solution
CONNECT AND PROTECT ProLine G2 The Next Generation Modular Solution The Next Generation Modular Enclosure Stronger. Faster. Easier. You ve already spent tens of thousands of dollars and hours designing
More informationIndustrial Enclosures
www Eclipse Junior Series Single Door Enclosures - NEMA 12, 13, 4... 2 Series 2000, Single Door Enclosures - NEMA 12, 4... 40 1414 Series JIC Enclosures, Clamped, Lift Off Cover - NEMA 12, 13... 4 1414
More informationType 4X Panel Enclosures
Type 4X Lift-Off Cover ata Sheet Seamless, poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
More informationJB & WM Specification Guide
JB & M Specification Guide Y COOSE RITTAL? Rittal understands the challenges faced every day by our customers as they strive to find solutions to their unique application requirements that aren t just
More informationThe Pushbutton Series
The The includes two separate enclosure designs, an in-line style and a multi-hole style configuration. oth are designed from fiberglass reinforced polyester and feature a continuous polyurethane gasket
More informationIndustrial Enclosures
48J Series - NEMA 2 Large JIC Enclosures Junction Boxes Application Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. Provides a degree of protection from falling
More informationIndustrial enclosures INDUSTRIAL INNOVATIVE INDIVIDUAL INSPIRING. Product Catalog.
Industrial enclosures INUSTRIAL INNOVATIVE INIVIUAL INSPIRING Product Catalog www.conteg.cz Content integ Industrial s and their Uses 3 integ Free-standing s Advantages and Specifications 4 Free-standing
More informationCS Wall-Mounted Sheet Steel Enclosures with Mounting Plate
www.bcp-group.co.id CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate Product Information CS Wall-mounted Sheet Steel Enclosures with Mounting Plate Accessories PT. Berkah Cipta Persada Kota Deltamas
More informationSquare-Duct Wireways. Catalog 5100CT0101R06/ Class CONTENTS Description... Page. Wireway Offerings... 3
Catalog 5100CT0101R06/11 2011 Class 5100 CONTENTS Description............................................. Page Wireway Offerings............................................ 3 General Purpose NEMA Type
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationStandard Product Hinged Back Plate
Spec-01177 HMI Enclosures and Accessories SYSPEND Aluminum HMI Enclosures and Accessories SYSPEND Aluminum HMI Enclosures, Type 12 INDUSTRY STANDARDS UL 508A Listed; Type 12; File No. E61997 cul Listed
More informationRMR Free-Standing Enclosures
Protecting your technology investment. RMR Free-Standing Enclosures provide NEMA Type 4 and 12 protection for large electronic components and controls that require sturdy mounting. ADVANTAGES Advanced
More informationOUR VISION STAINLESS STEEL MILD STEEL MODULAR FLOOR STANDING NON METALLIC P F BLACKBURN SOUTH VIC 3130
Excalibur REAZ AUSTRALIA Enclosures PTY LTD 59 P.O. Northville BOX 2340 Drive Barnsley NSW 2278 BLACKBURN SOUTH VIC 3130 T - 03 9878 4141 sales@reaz.com.au EX-EC/S General Purpose Wall Mount Enclosures
More informationTechnical Operating Information AC Unit (T150116G100) Replacement Filter No
763.422.2600 EC-00713 G763.422.2211 NETWORKING WALL-MOUNT CABINET ROTEK INGLE-DOOR AND DOUBLE-HINGED CABINET Wall-Mount Cabinets ROTEK ingle-door and Double-Hinged Cabinets ROTEK DOUBLE-HINGED, UL AND
More informationCable & Wire Management
Cable & ire Management ay-in ireway Data Sheet Cable & ire Management pplication ouses runs of control and power cable Protects against circulating dust, falling dirt and dripping noncorrosive liquids
More informationEQUIPMENT PROTECTION
PROLINE G2 The Next Generation Modular Solution EQUIPMENT PROTECTION www.pentairprotect.com/hoffman RIGID PROTECTION The Modular Enclosure Solution PROLINE G2 is designed to bear the advanced loads and
More informationLinkeo 19 freestanding cabinets Flat-pack solutions
Page 1.Generalcharacteristics...1 2.Range...2 3. Technical characteristics.................3 4.Packaging...4 5.Dimensions...4 6.Baying...8 7.Plinths...9 8.Cablemanagement...9 9.Fankits... 11 10.PDUsupports...
More information1.6 Accessories include tool-free snap-in technology options for air flow, cable management, shelves, power distribution units, etc.
Rittal TS IT Rack Guide Specifications TS IT network server enclosure 1.0 General Description 1.1 Modular Free Standing Equipment Cabinet 1.2 Various combinations of dimensions: 1.2.1 Height: 48 /1200mm,
More informationAM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
More informationLinkeo 19 freestanding cabinets
Linkeo 19 freestanding cabinets Catalogue number(s): 6 467 50/51/55/56/60/61/62/63 Page 1.Generalcharacteristics...1 2.Range...2 3. Technical characteristics.................3 4.Dimensions...4 5.Baying...8
More informationPremium Quality - Value Price
ACE 19" RACK SYSTEMS 1 VS 7000, Super Efficient Global IT Rack Designed ready to install and meeting international standard and of Top-quality. Two 19" mounting multi-functional profiles create a solid
More informationCHAPTER4 Wall-Mount Cabinets
: CHAPTER Wall-Mount Cabinets Protect your electronics investment with space-saving solutions from Pentair Technical Products Hoffman brand. In schools, factories, retail outlets and government centers
More informationType 4 Panel Enclosures
Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing
More informationWedge Consoles Joining Kit Full Back Panel Side-Mount Panel Caster Kit Bulletin: P11. E mm/in
Spec-01204 OLI old Series esk Consoles esk Consoles and Accessories old Series esk Console, Type 12 ALICATIO The OLI old Series esk Console provides an ideal surface for mounting MI controls such as keyboards,
More informationJunction Boxes & Enclosures JBES Series: Pre-drilled 316L Stainless Steel Junction Boxes Increased Safety
Je10 Without Terminals ompliance ata: TEX - IE: TEX IE E Ex e II; Ex ia II; Ex ib II T6 to T5 Ex t 21 T80 to T95 Operating Temperatures: -50 to +70 199 TX Product atalog pplications: Terminal junction
More informationpharmaceutical petrochemical industries The new Hygienic range Clean design, easy to clean
7 The new Hygienic range Clean design, easy to clean The Hygienic line is born to help prevent bacterical contamination of products being processed in the production lines where IRINOX enclosures are used,
More informationAccessories. Accessories. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Panels JIC & Small Panels, RHC Panels, Type 1 Medium Panels, NEM Panels, JIC Perforated Panels, Medium Perforated Panels, Flanged Panels, Wood ack Panels,..........................................................
More informationSeries 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
More informationUses, Certifications, and Standards Electrical Control and Instruments, Indoor/Outdoor EXTERNAL FEET, WALL standard UL 508, CSA C22.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 121264CHC Encl 12X12X6 N4 Enclosure Cooper B-Line/Cable Tray Catalog Number Manufacturer escription Weight per unit Product
More informationAccessories. Accessories. B-Line series electrical enclosures
Panels JIC & Small Panels, RHC Panels, Type 1 Medium Panels, NEM Panels, JIC Perforated Panels, Medium Perforated Panels, Flanged Panels, Wood ack Panels,...........................................................................
More informationCommercial Boxes and Enclosures COM-24 COM-66
and Count on Hoffman to provide you with off-the-shelf innovation features to save you time and money. Perforated panels make component layout and mounting fast, easy, and flexible. Integral wood panels
More informationUNEQUAL FLANGE RACK ACCESSORIES
CUSTOM CBINETS & RCKS Products for Custom Installation Solutions www.custcab.com UNEQUL FLNGE RCK CCESSORIES Custom Cabinets & Racks offers a large range of accessories to custom tailor UEF equipment racks
More informationNumber of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
More informationMS25, MST25, MS20, MST20
Versions: - MS25 with thermal and magnetic releases - MST25 with a thermal release - MS20 - with thermal and magnetic releases for single-phase consumers - MST20 with a thermal for single phase consumers
More informationEQUIPMENT PROTECTION
PROLINE G2 The Next Generation Modular Solution EQUIPMENT PROTECTION www.pentairprotect.com/hoffman stronger. faster. easier. The Modular Enclosure Solution Hoffman s PROLINE G2 modular solution is designed
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
More informationNEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series
NEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series Applications N412_CD Series Designed to house the following: AutomationDirect.com NEMA 1/12 Flexible shaft handle for Molded
More informationcabinets and equipment Atlantic, Atlantic stainless steel, Marina
cabinets and equipment Atlantic, Atlantic stainless steel, Marina EXTERNAL DIMENSIONS D ATLANTIC CABINETS (p. 276) MARINA CABINETS (p. 286) METAL IK 10 STAINLESS STEEL IP 66-IK 10 POLYESTER - IP 66 - IK
More informationDoor available front and rear
Features - The range consists of nine cabinets, ranging from 20" x 30" to 50" x 40". - Cabinet is self-extinguishing, hot molded halogen-free fiberglass reinforced polyester. - Gray dyed in mass (RAL 7036)
More informationCONCEALED CLOSER SERIES
CONCEALED CLOSER SERIES APPLICATIONS n For aluminum, hollow metal, or wood doors and frames. n Can be used with hinge or pivot mounted door. n Closers for 4 or minimum 1-3/4 head frame or 4 top rail. n
More informationDesign Standard. Purpose: Design Standard:
Design Standard Purpose: This design standard has the purpose of creating a consistent application of motor-control centers throughout the East Side Union High School District, therefore achieving a standard
More informationBOXES WALL-MOUNTING BOXES AND TERMINAL BOXES
BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES ST WALL-MOUNTING BOXES WITH BLANK DOOR STP WALL-MOUNTING BOXES WITH PLEXI DOOR ST/STP COMPLEMENTARY ACCESSORIES SDV TERMINAL BOXES WITH SCREWED COVER SDF TERMINAL
More informationAE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets
FMD ENCLOSURES AE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets Superior in design, Rittal's AE flange mounted disconnect enclosures have fewer moving parts, which reduces assembly and installation
More information