UNEQUAL FLANGE RACK ACCESSORIES
|
|
- Bernard Ramsey
- 6 years ago
- Views:
Transcription
1 CUSTOM CBINETS & RCKS Products for Custom Installation Solutions UNEQUL FLNGE RCK CCESSORIES Custom Cabinets & Racks offers a large range of accessories to custom tailor UEF equipment racks for a variety of installation solutions. Guard rails and extenders, spacer boxes, filler panels and end guards are available to add the finishing details for a complete installation. EXTENSION BRCKET END GURD GURD RIL EXTENSION END GURD RIL TRNSITION BUMPER FILLER PNEL SPCER BOX SSEMBLY Page 21
2 GURD RIL COVERS ND GURD BOXES UEF Guard Rail Covers secure to the base of an equipment rack and feature a cutout to locate an C convenience outlet. Guard rail covers include mounting hardware. C cover plates sold separately. Specify color when ordering. UEF GURD RIL COVERS GURD RIL GURD RIL COVER UEF GURD RIL COVERS DIMENSION PRT NUMBER 5" " " Custom sizes available upon request. Please call for details. OUTLET COVER (SOLD SEPRTELY) C COVER PLTE C COVER PLTE (W/SCREWS) PRT NUMBER SEE PGE 9 FOR VILBLE MOUNTING SCREWS UEF GURD BOXES SEE PGE 33 FOR C CONVENIENCE OUTLETS UEF Guard Boxes install on the side of the rack opposite of the guard rail. These allow for custom tailoring the footprint of the equipment rack. These guard boxes feature an electrical cutout for C convenience outlets. C covers sold separately. B 6 GURD BOX UEF GURD BOXES PRT DIMENSION B NUMBER 1" CC " " Custom sizes available upon request. Please call for details Page 22
3 CUSTOM CBINETS & RCKS GURD BOX EXTENDERS,RER GURD RILS ND GURD RIL EXTENSIONS Guard Box Extenders These guard box extenders increase the footprint of a UEF rack when placed between the base of the rack and the guard box. When coupled with different guard box thicknesses, a variety of footprints can be achieved. GURD BOX EXTENDERS GURD BOX EXTENDER "" PRT # 1 CC CC CC CUSTOM SIZES ND COLORS VILBLE UPON REQUEST. PLESE CLL FOR DETILS. GURD BOX B Guard Rail Extensions RER GURD RILS COVER SSEMBLY NCHOR KIT These extensions increase the footprint of a UEF rack when added to the guard rail side of the rack. Guard rail covers include a cutout for an C receptacle and a cover for the cutout. REMOVBLE RER GURD RIL BSE Rear Guard Rails Rear guard rails increase the footprint of the rear of a rack. Kits include base, cover assembly, anchor kit and all attaching hardware. Specify color when ordering. "B" PRT # 5 CCUE CCUE CCUE " CCUE " CCUE " CCUE " CCUE " CCUE2324 GURD RIL EXTENSIONS SEE PGE 9 FOR VILBLE GURD RIL (WELDED TO RCK) GURD RIL EXTENDER "C" "D" PRT # 3 8 CC CC D CUSTOM SIZES ND COLORS VIL- BLE UPON REQUEST. PLESE CLL FOR DETILS. C 6 COVER Page 23
4 UEF SPCER BOXES ND FILLER PNELS UEF Spacer Boxes Spacer boxes separate adjacent racks at the base by a specified distance () and footprint (B). Spacer box assemblies include junction plates and attaching hardware. UEF Filler Panels Filler panels fill the area between the uprights of adjacent racks. Junction plates and mounting hardware included. Specify color when ordering spacer boxes and filler panels. SPCER BOXES DIM B = 5" DIM B = 10" DIM B = 12" DIM B = 15" DIM = 2-1/2" CC CC DIM = 5" CC CC CC FILLER PNELS DIM = 2-1/2" DIM = 5" DIM = 7-1/2" DIM = 10" HEIGHT = 7' CCUF0775 CCUF0710 HEIGHT = 9' CCUF0975 CCUF0910 HEIGHT = 11'-6"' CCUF1175 CC CUSTOM SIZES ND COLORS VILBLE UPON REQUEST. PLESE CLL FOR DETILS. SEE PGE 9 FOR VILBLE FILLER PNEL JUNCTION PLTE B SPCER BOX Page 24
5 CUSTOM CBINETS & RCKS Transition Bumpers UEF TRNSITION BUMPERS These details provide a gradual transition between adjacent racks of different footprints. UEF transition bumpers are formed from 14 gage steel and feature a powder coat finish. These bumpers secure to the UEF guard rail / guard box with supplied mounting screws. Specify color when ordering. For custom sizes, please call. Specify color when ordering. OFFSET DISTNCE PRT NUMBER OFFSET DISTNCE PRT NUMBER 1" 2" 3" 4" 5" 6" CC CC CC CC CC CC " 8" 9" 10" 12" 15" CC CC CC CC CC CC SEE PGE 9 FOR VILBLE SPCER BOX OFFSET DISTNCE TRNSITION BUMPER GURD RIL Page 25
6 UEF SPCER BOX SIDE COVERS Spacer Box Side Covers These covers finish the side of a UEF spacer box. Formed from 14 gage steel and with a powder coated finish. Mounting hardware is included. Custom sizes available. Please call for details. Specify color when ordering. DIM. 12" 15" PRT # CC CC SEE PGE 9 FOR VILBLE SPCER BOX SPCER BOX COVER CLIP-ON NUT BOLT 6 SPCER BOX SPCER BOX COVER SHOWING COVER FTER INSTLLTION Page 26
7 CUSTOM CBINETS & RCKS JUNCTION KITS ND CBLE TIE KITS Junction Kits Junction kits tie together adjacent bays at a predetermined distance. Junction plates are formed from 11 gage steel with a powder coated finish. Mounting screws are included. Specify color when ordering. JUNCTION PLTE SEE PGE 9 FOR VILBLE RCK HEIGHT = O" = 2-1/2" = 5" 7' CC CC CC ' CC CC CC '-6" CC CC CC Junction Plates These are the same plates as used in the junction kits, but sold individually. Specify color when ordering. (DISTNCE BETWEEN RCKS) SIZE PRT # = O = 2-1/ = = 7-1/2 CCJP7500 = 10 CC Cable Tie Kits Cable tie kits provide points to tie off cable in the duct of UEF and network equipment racks. The cable tie bars are formed from 11 gage steel and feature yellow zinc plating. Mounting screws are included. DUCT MOUNTING SCREWS PPLICTION PRT # SINGLE ' RCK CC ' RCK CC '-6" RCK CC CBLE TIE BR Page 27
8 UEF END GURD SSEMBLIES ND FLUSH END SHIELDS End Guard ssemblies End guards finish the end of an equipment rack lineup. End guards are secured to an equipment rack with junction plates on the wide flange side of the rack and with extension plates on the side of the narrow flange. These assemblies feature an end guard manufactured from 11 gage steel, switch cover plates, and a 5 end guard rail. dditional end guard accessories can be used to custom tailor the installation. Flush End Shields Flush end shields cover the duct on the side of an equipment rack. These shields are full-length and extend from the floor to the top of the rack. Please specify left-hand or right-hand application when ordering for 7 racks. Flush end shields for 9 and 11-6 racks are universal and will fit both left-hand and right-hand applications. Manufactured from 11 gage steel and feature a powder coated finish. END GURD 5 LEFT-HND SHIELD (7 RCK) RIGHT-HND SHIELD (7 RCK) SWITCH COVER PLTES (INCLUDED) B EQUIPMENT RCK SEE PGE 9 FOR VILBLE 5 END GURD RIL (INCLUDED) UEF END GURD SSEMBLIES PRT NUMBER RCK HEIGHT (B) END GURD WIDTH () ' 7" ' 7" '-6" 7" CUSTOM SIZES ND COLORS VILBLE UPON RE- QUEST. PLESE CLL FOR DETILS. Page 28 RELIEF FOR GURD RIL FLUSH END SHIELDS RCK HEIGHT PRT # 7' (LH) CCES0084-LH 7' (RH) CCES0084-RH 9' CCES '-6" CCES0138
9 CUSTOM CBINETS & RCKS UEF END GURD CCESSORIES Extension Brackets These brackets secure the back side of the rack to the end guard when a filler panel or spacer box is installed between the rack and the end guard. Brackets include mounting screws. Made from 11 gage steel, powder coated finish. Sold individually, specify color when ordering. FILLER PNEL EQUIPMENT RCK B EXTENSION BRCKETS B = B = 2-1/2 CC B = 5 CC B = 7-1/2 CCEB0075 B = 10 CCEB0010 END GURD EXTENSION BRCKET SEE PGE 9 FOR VILBLE UEF End Guard Rails End Guard Rails provide a transition from the edge of the end guard to the equipment rack. Formed from 3/16 steel, these end guard rails include mounting hardware and feature a powder coated finish. Specify color when ordering. END GURD END GURD RIL UEF END GURD RILS PRT # 1" CC " " " CC " " " " " " " " " Page 29
10 FOR USE IN NON-SEISMIC INSTLLTIONS WITH CC&R UEF OR NETWORK RCKS 3/8" DROP IN NCHORS CC /2" DROP IN NCHORS CC THREDED STUD EQUIPMENT RCK NCHOR KITS DROP-IN NCHORS WITH HOLD DOWN PLTES FLT WSHER NCHOR WSHER HOLD DOWN PLTE DROP-IN NCHOR FOR USE IN NON-SEISMIC INSTLLTIONS 3/8" DROP IN NCHORS CC /2" DROP IN NCHORS CC HEX NUT HILTI HSLB NCHOR HILTI HSLB NCHOR HILTI 12 MM NCHORS WITH HOLD DOWN PLTES NCHOR WSHER FOR USE IN SEISMIC INSTLLTIONS WITH CC&R UEF OR NETWORK RCKS M12/6 NCHORS HILTI 12MM NCHORS WITH HOLD DOWN PLTES HOLD DOWN PLTE THREDED STUD NCHOR WSHER FLT WSHER DROP IN NCHORS WITH NCHOR WSHERS NCHOR WSHER DROP-IN NCHOR HOLD DOWN PLTE FOR USE IN SEISMIC INSTLLTIONS WITH DIGONL NCHOR SLOTS M12/6 NCHORS CC FOR USE IN NON-SEISMIC INSTLLTIONS WITH DIGONL NCHOR SLOTS 3/8" DROP IN NCHORS CC /2" DROP IN NCHORS CC HEX NUT HILTI 12MM NCHORS WITH NCHOR WSHERS HILTI HSLB NCHOR 4 E. THREDED STUD FLT WSHER NCHOR WSHER HOLD DOWN PLTE DROP-IN NCHOR DROP IN NCHORS WITH HOLD DOWN PLTES Page 30 NCHOR WSHER 8 E. FOR USE IN SEISMIC INSTLLTIONS WITH CC&R UEF OR NETWORK RCKS M12/6 NCHORS CC010703
11 CUSTOM CBINETS & RCKS EQUIPMENT RCK NCHOR KITS & COMPONENTS Seismic nchor and Shim Kit This kit includes 4 Hilti HSL-B M12/25 anchors, 8 anchor washers, 4 NTI style anchor plates and 8 leveling shims (14 gage. thickness). HSL-B M12/25 NCHOR NCHOR WSHER nchor Plates These plates distribute the load of the anchor in the base of equipment racks. Manufactured from steel plate and finished in yellow zinc dichromate. Sold individually. Order per part number shown below each drawing. NTI-STYLE NCHOR PLTE NCHOR & SHIM KIT With M12/25 anchors CC Leveling Shims These shims compensate for uneven floors when installing equipment racks. vailable in three thicknesses, these shims are manufactured from steel and feature a gray powder coated finish. Sold individually. used when anchoring equipment racks and frames to the floor. Manufactured from steel plate and finished in yellow zinc dichromate. Sold individually. LEVELING SHIM nchor Washers These square washers are THICKNESS PRT # 1/16" G 1/8" G 1/4" G YZN CC YZN NTI STYLE HOLE SIZE THICKNESS PRT # CCW0202-YZN CC YZN CC010307HD-YZN Page 31 CC YZN
12 NCHOR COMPONENTS Hilti HSL-B nchors Genuine Hilti HSL-B anchors, when installed per Hilti instructions, ensure proper installation of seismic rated equipment racks. Sold individually. Order Hilt HSL-B anchors per the table below: Heavy Hex Nuts Heavy hex nuts are used with drop in anchors and anchor studs to provide anchoring solutions for a variety of applications. Grade 5 fastener with yellow zinc dichromate finish. Sold individually. HILTI HSL-B NCHORS HILTI PRT# NCHOR LENGTH OUR PRT # HSL-B M12/6 110MM V-0838 HSL-B M12/25 120MM H-0119 HSL-B M12/50 145MM H-0300 HEVY HEX NUTS DISTNCE THRED SIZE CROSS FLTS PRT # 3/8"-16 11/16" H /2"-13 7/8" H /8" /16" H-0116 nchor Studs These studs are inserted into drop-in style anchors and are secured with washers and hex nuts. Grade B7, yellow zinc finish. Order studs per the table below. Flat Washers USS flat washers as supplied in our anchor kits. vailable in 3/8, 1/2 and 5/8 and finished in yellow zinc dichromate. Order flat washers from the table below. THRED LENGTH PRT # 3/8"-16 2" H /8"-16 3" V /2" /4" H /2"-13 3" H " 1/2"-13 4 H " 5/8"-11 4 H SIZE PRT # 3/8" V /2" V /8" V-0264 Hilti Drop In nchors Sold individually. Order from table below. THRED PRT # 3/8"-16 V /2"-13 H /8"-11 H-0310 Page 32
13 CUSTOM CBINETS & RCKS Electrical Outlet Kits ELECTRICL OUTLET KITS These kits are designed to provide C convenience outlets in the base of UEF equipment racks. Kits include 15 duplex receptacles, handy boxes and cover plates with mounting brackets and attachment hardware. Brackets feature a telco gray powder coat finish. Boxes and covers have a galvanized finish. COVER PLTE GURD RIL DUPLEX RECEPTCLE OUTLET BOX DUPLEX RECEPTCLE GURD RIL COVER RER BRCKET FRONT BRCKET HNDY BOX COVER PLTE EXTENSION RING PRT # DESCRIPTION TKG Fits bolted base racks and racks with 15" or larger footprint, includes outlets for front and rear of rack. Fits welded base and seismic racks. Includes outlets for front TKG and rear of rack. TKG Fits rear (2") guard rail only TKG Fits front guard rail only Electrical Kit Components These individual electrical kit components are available separately: 20 DUPLEX RECEPTCLE V-0986 RECEPTCLE COVER V-1180 HNDY BOX 4 X 2-1/8 X 1-7/8 V-1181 HNDY BOX 4 X 2-1/8 X 1-1/2 H-0016 EXTENSION RING 4 X 2-1/8 X 1-7/8 V-1182 Don t see what you need? Please call for assistance. OUTLET BOX V-1182 FRONT MOUNTING BRCKET TKG RER MOUNTING BRCKET TKG RER MOUNTING BRCKET - SHORT TKG Page 33
14 NETWORK EQUIPMENT RCK Products for Custom Installation Solutions CCESSORIES Custom Cabinets & Racks offers a large range of accessories to custom tailor network equipment racks for a variety of installation solutions. Guard rails and extenders, spacer boxes, filler panels and end guards are available to add the finishing details for a complete installation. FILLER PNEL EXTENSION BRCKET NETWORK EQUIPMENT RCK END GURD GURD RIL EXTENSION TRNSITION BUMPER C RCEWY KIT END GURD RIL SPCER BOX Page 34
15 CUSTOM CBINETS & RCKS NETWORK EQUIPMENT RCK CCESSORIES SHOWING RER SIDE OF LINEUP FILLER PNEL EXTENSION BRCKET SPCER BOX EXTENDER RER GURD RIL GURD RIL EXTENSION Page 35
16 GURD RIL COVERS, RER GURD RILS ND EXTENSIONS Guard Rail Covers cover the open area in the base of network equipment racks. Manufactured from 11 gage steel, these covers feature a powder coated finish. Mounting hardware is included. Specify color when ordering. GURD RIL COVERS DIM. PRT # 5" " SEE PGE 9 FOR VILBLE Custom sizes available upon request. Please call for details. GURD RIL COV- ER RER GURD RILS ND EXTENSIONS RER GURD RIL These network guard rails install on the rear of network equipment racks. These allow for custom tailoring the footprint of the equipment rack. Guard rail extenders can be installed to further increase footprint. Specify color when ordering. B C GURD RIL EXTENDER (WILL LSO FIT FRONT GURD RIL COVER) NETWORK RER GURD RILS DIM. PRT # 1" " Custom sizes available upon request. Please call for details. SEE PGE 9 FOR VILBLE Page 36 NETWORK GURD RIL EXTENDERS DIM. PRT # 1" CC " CC CC010030
17 CUSTOM CBINETS & RCKS NETWORK GURD RIL SSEMBLIES ND NETWORK RER GURD RIL SSEMBLIES EXTENSIONS These guard rail assemblies bolt to the rear of a network rack to increase the footprint of the rack. The fully welded base bolts directly to the rear of the rack and is then secured to the floor with supplied drop-in anchors. The cover secures to the base to complete the installation. Specify color when ordering. RER OF RCK BSE 4 NCHOR KIT COVER EXPLODED VIEW RER GURD RIL SSEMBLIES DIMENSION PRT NUMBER 5 CC " CCNE CCNE " CC " CCNE " CCNE2320 SSEMBLED VIEW 4 Custom sizes available upon request. Please call for details. SEE PGE 9 FOR VILBLE NETWORK GURD RIL EXTENSION SSEMBLIES These extensions increase the footprint of a network rack. These extensions feature an extension base, which fastens to the welded guard rail on the front of the rack, and a cover. Manufactured from 11 gage steel, these guard rail extensions feature a powder coated finish and include all mounting hardware. Specify color when ordering. GURD RIL EXTENSION BSE GURD RIL COVER 4 4 B EXPLODED VIEW B SSEMBLED VIEW Custom sizes available upon request. Please call for details. DIMENSION DIMENSION B PRT NUMBER 8" CCNE " CCNGE " CC SEE PGE 9 FOR VILBLE Page 37
18 NETWORK FILLER PNELS ND SPCER BOXES Network Spacer Boxes Spacer boxes separate adjacent racks at the base by a specified distance () and footprint (B). Spacer box assemblies include junction plates and installation hardware. Specify color when ordering. SPCER BOXES DIM B = 12" DIM B = 15" DIM = 2-1/2" CCNS2515 DIM = 5" CCNS0515 DIM = 7-1/2" CCNS5275 CCNS7515 DIM = 10" CCNS5210 CCNS1015 Network Filler Panels Filler panels fill the area between the uprights of adjacent racks. Junction plates and mounting hardware included. Specify color when ordering. FILLER PNELS PNEL WIDTH RCK HEIGHT 2-1/ / CCNF0775 CCNF CCNF0975 CCNF CCNF1175 CCNF1110 FILLER PNEL NETWORK EQUIPMENT RCK SPCER BOX JUNCTION PLTE B CUSTOM SIZES ND COLORS VILBLE UPON REQUEST. PLESE CLL FOR DETILS. Page 38
19 Network Spacer Box Extenders Spacer box extenders increase the footprint of a spacer box to match adjacent bays. Extenders are bolted to an existing spacer box in place of the removable guard rail. Mounting hardware included. Specify color when ordering. CUSTOM CBINETS & RCKS NETWORK SPCER BOX EXTENSIONS, GURD RIL EXTENSIONS ND TRNSITION BUMPERS SPCER BOX EXTENDER EXISTING SPCER BOX (RER GURD RIL REMOVED) C Network Spacer Box Guard Rail Extenders Guard rail extenders increase the footprint of a spacer box to match adjacent bays. Extenders will fit front or rear of spacer boxes. Mounting hardware included. Specify color when ordering Custom sizes available upon request. Please call for details D SPCER BOX GURD RIL EXTENDER SPCER BOX DIM C = 3" DIM C = 5" EXTENDERS DIM = 2-1/2" CCNSE2503 CC DIM = 5" CCNSE0503 CC GURD RIL DIM D = 1" DIM D = 2" DIM D = 3 EXTENDERS DIM = 2-1/2" CC CC CC DIM = 5" CC CC CC Transition Bumpers These details provide a gradual transition between adjacent racks of varying footprints. Network transition bumpers are formed from 3/16 thick. steel and feature a powder coat finish. Mounting hardware is included. Specify color when ordering. For custom sizes, please call. SEE PGE 9 FOR VILBLE OFFSET DISTNCE PRT # (OFFSET DISTNCE) SPCER BOX TRNSITION BUMPER 1" 2" 3" 4" 5" 6" CCNB0001 CCNB0002 CCNB0003 CCNB0004 CCNB0005 CCNB0006 OFFSET DISTNCE PRT # 7" 8" 9" 10" 12" 15" CCNB0007 CCNB0008 CCNB0009 CCNB0010 CCNB0012 CCNB0015 Page 39
20 NETWORK END GURDS End Guard ssemblies (5-2 Footprint) End guards finish the end of an equipment rack lineup. Typically, these are secured to an equipment rack with junction plates on the wide flange side of the rack and with extension brackets on the side of the narrow flange. These assemblies accommodate a network bay with a 5 front guard rail and a 2 rear guard rail. The end guard is manufactured from 11 gage steel and is equipped with switch cover plates and end guard rails. dditional end guard accessories are available to custom tailor the installation. Specify color when ordering. EXTENSION BRCKET 5-2 BSE CONFIGURTION PRT NUMBER RCK HEIGHT BSE CON- FIGURTION ' ' '-6" 5-2 SEE PGE 9 FOR VILBLE COLOR OPTIONS END GURD 2 RER GURD RIL FRONT GURD RIL RER 3/4 VIEW END GURD RIL FRONT 3/4 VIEW END GURD RILS DIM PRT # DIM PRT # 1" " CC " CC " CC " " CC " " CC " " CC " CC " CC " CC " CC END GURD END GURD RIL Page 40
21 NETWORK END GURDS End Guard ssemblies (5-2 Footprint) End guards finish the end of an equipment rack lineup. Typically, these are secured to an equipment rack with junction plates on the wide flange side of the rack and with extension brackets on the side of the narrow flange. These assemblies accommodate a network bay with a 5 front guard rail and a 5 rear guard rail. The end guard is manufactured from 11 gage steel and is equipped with switch cover plates and end guard rails. dditional end guard accessories are available to custom tailor the installation. Specify color when ordering. SEE PGE 9 FOR VILBLE COLOR OPTIONS 5 RER GURD RIL RER 3/4 VIEW 3 END GURD END GURD RIL BSE CONFIGURTION PRT NUMBER RCK HEIGHT BSE CON- FIGURTION ' ' '-6" FRONT 3/4 VIEW 5 FRONT GURD RIL End Guard ssemblies (5-2 Footprint) END GURD End guards finish the end of an equipment rack lineup. Typically, these are secured to an equipment rack with junction plates on the wide flange side of the rack and with extension brackets on the side of the narrow flange. These assemblies accommodate a network bay with a 6 front guard rail and a 1 rear guard rail. The end guard is manufactured from 11 gage steel and is equipped with switch cover plates and end guard rails. dditional end guard accessories are available to custom tailor the installation. Specify color when ordering. 6 RER GURD RIL END GURD RIL RER 3/4 VIEW FRONT GURD RIL END GURD RIL FRONT 3/4 VIEW 6-1 BSE CONFIGURTION SEE PGE 9 FOR VILBLE COLOR OPTIONS PRT NUMBER RCK HEIGHT BSE CON- FIGURTION ' ' '-6" 6-1 Page 41
22 Panel-Style End Guard CUSTOM CBINETS & RCKS PNEL-STYLE END GURD These end guards finish the end of a lineup with a 15 footprint. The panel features multiple mounting locations to custom match the end guard to the footprint of the rack to which it is secured in 1 increments. These end guards feature a 14 gage steel panel with 11 gage steel mounting brackets. ll mounting END PNEL hardware is included. Optional standoff kits allow for spacing the end panel off of the rack a distance of 2-1/2, 5, 7-1/2 or 10. Specify color when ordering. INSTLLED VIEW (OUTSIDE) SWITCH LOC- TIONS (CN BE KNOCKED OUT FOR SWITCH INSTLLTION) INSTLLED VIEW (INSIDE) NETWORK RCK PNEL-STYLE END GURD SIZE PRT # 15"W X 84 H CCEG0715 KNOCKOUT FOR C CONVENIENCE OUTLET. SEE PGE 9 FOR VILBLE Standoff Kits include 3 each front and rear mounting brackets to extend end guard panel when using a spacer box and filler panel. Specify color when ordering. PNEL DRILLED ND TPPED FOR MULTIPLE MOUNT- ING LOCTIONS SPCER BOX FILLER PNEL END GURD STNDOFF KITS DIM PRT # 2-1/2" CCEGK25 5" CCEGK50 7-1/2" CCEGK75 10" CCEGK10 EQUIPMENT RCK CUSTOM SIZES ND COLORS VILBLE UPON REQUEST. PLESE CLL FOR DETILS. STNDOFF BRCKETS (TYPICL 3 LOCTIONS) NCHOR HOLE (USED TO SECURE END GURD TO FLOOR) Page 42
23 NETWORK FLUSH END SHIELDS ND C RCEWY Flush End Shields Flush end shields cover the duct on the side of an equipment rack. These shields are full-length and extend from the floor to the top of the rack. Please specify left-hand or right-hand application when ordering for 7 racks. Flush end shields for 9 and 11-6 racks are universal and will fit both left-hand and right-hand applications. Manufactured from 11 gage steel and feature a powder coated finish. Specify color when ordering. C Raceway Kits These C raceway kits allow for access to C power along the base of network racks, Wiremold raceway is all steel construction and utilizes an approved Plugmold receptacle rated 115V. Raceways include mounting hardware and cover clips for splicing from one section to another. Specify color when ordering. 5 LEFT-HND SHIELD (7 RCK) RIGHT-HND SHIELD (7 RCK) SPCER WIDTH 25-7/8 C RCEWY FOR SPCER BOX C RCEWY KITS WITH WIDTH OUTLET? PRT # 25-7/8" YES CC /8" NO CC /2" NO CC " NO CC C RCEWY (SHOWN WITH OUTLET) RELIEF FOR GURD RIL RCK HEIGHT PRT # 7' (LH) CCES0084-LH 7' (RH) CCES0084-RH 9' CCES '-6" CCES0138 RCEWY SHOWN INSTLLED CUSTOM SIZES ND COLORS VILBLE UPON REQUEST. PLESE CLL FOR DETILS. SEE PGE 9 FOR VILBLE Page 43
24 CUSTOM CBINETS & RCKS EQUIPMENT RCK GROUND STRPS ND GROUND BRS Ground Strap Kits These ground strap kits provide a ground for equipment racks and frames. These kits included #6 WG stranded wire, (2) Burndy compression lugs, (4) #12-24 x 1/2 Philips head, type F thread cutting screws and (4) lock washers. SCREW LOCK WSHER Ground Strap Components Custom Cabinets & Racks offers these individual ground strap components to enable installers to customize grounding installations. Cable, lugs, screws and lock washers are available separately. 3/4 Burndy Y6CL2TC14E2 1/4 DI. HOLE TYPE F SCREW #12 INT LOCK WSHER BURNDY Y6CL2TC14E2 LUG #6WG WIRE EQUIPMENT RCK GROUND STRP KITS WIRE LENGTH WIRE COLOR PRT # 12" GRY V G 18" GRY V-0717-G 24" GRY V G 36" GRY V G 12" GREEN V GN 18" GREEN V-0717-GN 24" GREEN V GN 36" GREEN V GN Custom ground strap kits can be built to order. Please call for availability. GROUND STRP COMPONENTS DESCRIPTION PRT # BURNDY Y6CL2TC14E2 V-1013 COMPRESSION LUG #12-24 TYPE F V-1015 SCREW #6 WG CBLE (GRY) #6 WG CBLE (GREEN) V-1012-XXX-G (XXX = LENGTH IN INCHES) V-1012-XXX-GN (XXX = LENGTH IN INCHES) 23 Equipment Rack Ground Bar Kit This copper ground bar can be used in 23 equipment racks. Order part number CC /16 x 1 COPPER BR DRILLED & TPPED FOR #6-32 SCREWS Don t see what you need? Please call for assistance. SPLICE PLTE Custom ground bar kits can be built to order. Please call for availability. Page 44
25 Equipment Standoffs EQUIPMENT STNDOFFS Occasionally, it is necessary to stand equipment off of the mounting rail of the equipment rack by a measured distance. These equipment standoffs relocate the equipment mounting surface by use of a pair of channels and mounting hardware. Channels are formed from 11 gage steel and feature #12-24 UNC threads for equipment mounting. vailable in WECO 2 and EI 1-3/4 hole spacing. Specify color when ordering. STNDOFFS FOR WECO 2 RCK UNITS STNDOFFS FOR EI 1-3/4 RCK UNITS #12-24 THREDED HOLES #12-24 THREDED HOLES RCK UNITS MOUNTING SCREWS RCK UNITS MOUNTING SCREWS STNDOFF KITS - EI 2" RU RCK UNITS (RU) DIM " CCSK2011 CCSK2012 CCSK2013 CCSK2014 2" CCSK2021 CCSK2022 CCSK2023 CCSK2024 3" CCSK2031 CCSK2032 CCSK2033 CCSK2034 5" CCSK2051 CCSK2052 CCSK2053 CCSK2054 7" CCSK2071 CCSK2072 CCSK2073 CCSK2074 8" CCSK2081 CCSK2082 CCSK2083 CCSK2084 STNDOFF KITS - EI 1-3/4" RU RCK UNITS (RU) DIM " CCSK1711 CCSK1712 CCSK1713 CCSK1714 2" CCSK1721 CCSK1722 CCSK1723 CCSK1724 3" CCSK1731 CCSK1732 CCSK1733 CCSK1734 5" CCS1751 CCSK1752 CCSK1753 CCSK1754 7" CCSK1771 CCSK1772 CCSK1773 CCSK1774 8" CCSK1781 CCSK1782 CCSK1783 CCSK1784 SEE PGE 9 FOR VILBLE CUSTOM SIZES ND COLORS VILBLE UPON REQUEST. PLESE CLL FOR DETILS. Page 45
26 dapter Plate Kits With EI 1-3/4 Mounting Holes CUSTOM CBINETS & RCKS These adapter plate kits allow for mounting 19 equipment in 23 equipment racks. dapter plates feature a slotted mounting face 1-1/4 that allow for installation on EI 1-3/4 or WECO 2 mounting spaces. Mounting holes are drilled and 1/2 EI 1-3/4 MOUNTING tapped for #12-24 mounting screws on EI 1-3/4 spacing. Mounting hardware included. Manufactured from 11 gage steel with a powder coated finish. Specify color when ordering. DPTER PLTE KITS dapter Plate Kits with WECO 2 Mounting Holes These adapter plate kits allow for mounting 19 equipment in 23 equipment racks. dapter plates 1 feature a slotted mounting face 1 that allow for installation on EI 1-3/4 or WECO 2 mounting spaces. Mounting holes are drilled and tapped for #12-24 WECO 2 MOUNTING mounting screws on WECO 2 spacing. Mounting hardware included. Manufactured from 11 gage steel with a powder coated finish. Specify color when ordering. 2 DPTER PLTE B DPTER PLTE DPTER PLTE KITS FOR EI 1-3/4" MOUNTING HOLES MOUNTING (OVERLL SPCES LENGTH) PRT # /16" CCR /16" CCR /16" CCR /16" CCR /16" CCR CCR7175 DPTER PLTE KITS FOR WECO 2" MOUNTING HOLES MOUNTING B (OVERLL SPCES LENGTH) PRT # /16" CCR /16" CCR /16" CCR /16" CCR /16 CCR CCR7200 SEE PGE 9 FOR VILBLE CUSTOM SIZES ND COLORS VILBLE UPON REQUEST. PLESE CLL FOR DETILS. Page 46
27 EQUIPMENT RCK SHELVES Universal Equipment Shelves These shelves are suitable for a variety of uses for equipment weighing 75 pounds or less. Manufactured from 11 gage steel with a powder coated finish. Mounting screws sold separately. Specify color when ordering. MOUNTING SCREWS (SOLD SEPRTELY) H Ventilated Shelves These cantilever style shelves are formed from 14 gage steel and feature a staggered slot design for ventilation. vailable in heights ranging from 1 RU to 4 RU. These shelves feature a powder coated finish. Mounting screws sold separately. Specify color when ordering. SLOTTED FOR VENTILTION H 6 D W D W UNIVERSL EQUIPMENT SHELVES W H D PRT # 19" 2 RU 10" CCSH " 2 RU 12" CCSH " 2 RU 10" CCSH " 2 RU 12" CCSH1223 Heavy Duty Equipment Shelves These rugged shelves are formed from 10 gage. steel and are suitable for equipment up to 125 pounds. Powder coated finish. Mounting screws sold separately. Specify color when ordering. VENTILTED SHELVES W H D PRT # 19" 1 RU 12" VCSH " 2 RU 12" VCSH " 1 RU 12" GCSH " 2 RU 12" GCSH " 1 RU 15" GCSH " 2 RU 15" GCSH D 9 HEVY DUTY EQUIPMENT SHELVES W HEIGHT D PRT # 19" 5 16" CCSH CCSH CCSH " 5 18" CCSH1823 W CUSTOM SIZES ND COLORS VILBLE UPON REQUEST. PLESE CLL FOR DETILS. Page 47 SEE PGE 9 FOR VILBLE MOUNTING SCREWS SOLD INDIVIDULLY (YELLOW ZINC FINISH) SIZE PRT # #10-32 X 1/4" H-0367 #10-32 X 3/8" H-0368 #12-24 X 1/4 V-0714 #12-24 X 3/8" V-1130 LL PHILLIPS PN HED
28 CUSTOM CBINETS & RCKS STIFFENER PLTES ND BLNK PNELS Stiffener Plates These plates fill in unused mounting spaces in equipment racks and add rigidity to the frame. Panels are manufactured from 14 gage steel with a powder coated finish. Please specify color when ordering. Panels include #12-24 mounting screws. STIFFENER PLTE STIFFENER PLTES DIMENSION PRT # 7-1/2" CC " CC " CC " CC MOUNTING SCREWS INCLUDED SEE PGE 9 FOR VILBLE CUSTOM SIZES ND COLORS VILBLE UPON REQUEST. PLESE CLL FOR DETILS. Blank Panels These panels are used to fill unused space in equipment racks for appearance and airflow control. Panels are manufactured from 16 gage steel and feature a powder coated finish. Panels include #12-24 mounting screws. Specify color when ordering. BLNK PNEL BLNK PNELS (1-3/4 ) RU WIDTH = 19 WIDTH = 23 1 CCBL1901 CCBL CCBL1902 CCBL CCBL1903 CCBL CCBL1904 CCBL CCBL1905 CCBL2305 CUSTOM SIZES ND COLORS VILBLE UPON REQUEST. PLESE CLL FOR DETILS. WIDTH MOUNTING SCREWS INCLUDED Page 48
Copper Bar... ASTM B187, B152 Silicon Bronze... ASTM F468, F467, F651
Eaton offers a range of cable grids and distribution frames to meet various telecommunications applications. Cable grids feature light-weight, yet durable steel c-channel, and are design to support cable
More informationDIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7
L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE
More informationC12. Grounding / Isolation / Electrical. Note: XX= finish code. DUPLEX AC OUTLET ASSEMBLY NETBAY AC OUTLET STRIP / BLANK STRIP.
Grounding / Isolation / Electrical DUPLEX C OUTLET SSEMBLY Phone: (99) 575- Fax: (99) 575-708 Modified:09/9/0 Part Number 0000xx 8 5 7 front bracket rear bracket outlet box outlet box cover 5 duplex receptacle
More informationCOIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL
SIDE CR FOR INSTLLTION NEXT TO DIEBOLD 00 - IN LOBBY TELLER (ILT) L2 CLL -800--600 CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationELECTRICAL ACCESSORIES FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
ELECTRICL CCESSORIES FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Electrical Fittings Receptacles Fixture Hangers ccessories and Connectors Junction Boxes In-Channel Joiners Swivel Hangers Cable Entrance Tubing
More informationDSX-1 Digital Signal Cross-Connect
DSX-1 Digital Signal Cross-Connect Rack Framework and ccessories Seventh Edition Table of Contents vailable Framework Types Network Unequal Flange See Page 12 Non-Network Unequal Flange See Page18 Channel
More information9900 IN LOBBY TELLER - (ILT) PORTRAIT AND LANDSCAPE DISPLAY PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 6 CALL
00 IN LOBBY TELLER - (ILT) PORTRIT ND L CLL -800--600 40mm ( 6") CEN I / CEN III GS / CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND
More informationSTAKE BODY Swing-Away Mount
STKE BODY Swing-way Mount for the Model 8160 Installation Instructions 720713 2006 Little Wonder, Inc. ll Rights Reserved. Table of Contents ssembly Instructions.......................2 Parts & Hardware
More informationElectrical Accessories
complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. -Line s surface raceways are
More information3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More information* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More information* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
More information4 X1 X X1 9 X1 A1082
- MODEL(S) 08 UGER, BSE MODEL, 08 8 0 ITEM NO. PRT NO. DESCRIPTION QTY 00 CBLE,TRUSS,SHORT,/FT, GLV,0 CBLE /" X 0 FT TRUSS, LONG, 08 PB000 INFEED HOUSING SSEMBLY, 0XX PB00 CRRIGE SM, 08 PB00 TUBE SSEMBLY,
More informationBLTELCO-10. Telecommunications. Equipment Supports Racks Runway Cable Management
BLTELCO-10 Telecommunications Equipment Supports Racks Runway Cable Management Cooper B-Line, a division of Cooper Industries (NYSE: CBE), is a leading manufacturer of quality support systems and enclosures
More informationC5 Series A/V Credenza Rack
96-01138 / rev 3a / 10-17-13 C5 Series /V Credenza Rack EXCEPTIONL SUPPORT & PROTECTION EI/TI Compliant Unique Design with Integrated Thermal Management Simplifies System Design and Minimize Delays Features
More information8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
More informationFORD EXPLORER. (2010 Production Onwards) INTEGRATED SIDE STEP INSTALLATION INSTRUCTION. 60 Minutes. 13mm and 17mm Socket
FORD EXPLORER (010 Production Onwards) INTEGRTED SIDE STEP INSTLLTION INSTRUCTION ccessory Part No. STEP0011 60 Minutes pprox Product Weight: 15kg/33 lbs IMPORTNT - PLESE RED INSTRUCTIONS BEFORE COMMENCING
More informationDIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
More informationCS 7780 FULL FUNCTION DRIVE-UP TERMINAL
L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationSEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS
R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH
More informationTable of Contents. Quick Installation Guide 2 - Disconnect Switch Installation - Disconnect Handle Installation - Cutting Connecting Rod
ulletin 494V Variable Depth Disconnect Switch Installation Instructions (Cat 494V-DS30; -DSX30 - Series D; 494V-DS; -DSX - Series D) (Cat 494V-DS00; -DSX00 - Series D; 494V-DS00; -DSX00 - Series D) TTENTION:
More information5 X1 6 X1 1 X2 2 X2 9 X1 4
0 UGER SSEMBLY, 0 8 ITEM NO. PRT NO. DESCRIPTION QTY 0 CBLE,TRUSS,LONG,/FT, GLV,0 0 CBLE,TRUSS,SHORT,/FT, GLV,0 PB000 FRME SSEMBLY, 0 4 PB000 INFEED HOUSING SSEMBLY, 0XX PB000 TUBE SSEMBLY, DISCHRGE, 0
More information8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
More informationCC-410 KIT SERIES INSTRUCTION SHEET
(COMPLETE CC-410-W KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CC-410 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMG OF SLIDING DOORS. CN
More informationRacks M A N A G E M E N T. Premise Connectivity Systems. A N DCable. Racks and Cable Management
Premise Connectivity Systems A N DCable Racks M A N A G E M E N T w w w. s i g n a m a x. c o m Racks and Cable Equipment Racks Vertical Cable Management for Equipment Racks Equipment Shelves Hinged Wall-Mount
More informationPIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables 2 40 4 44 MTERIL Unistrut pipe supports, unless
More informationCCD-493 KIT SERIES INSTRUCTION SHEET
(COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED
More information8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
More informationInstallation Instruction
CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05 PETROLEUM MNIFOLD for TNK TRUCKS Installation Instruction Unit of Knappco, Inc. Phone: 86-74-6600 Fax: 86-74-06 CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05
More informationFront Panel Service. Front panels are structural elements which need to be. Services in detail: designed individually depnding on the application.
Front Pnel Service Front pnels re structurl elements which need to be designed individully depnding on the ppliction. Prticulrly for smll quntities ( 50 units), this entils high time input in terms of
More informationSECTION A-A
40.08 D 8 6 5 4 3 2 1 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D C 51.1 48 20.25 18 C 23.68 15.12 NOTE: DRWER UNIT NOT INCLUDED,
More informationDIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationC&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
More informationSpring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More information13V399AN-DC DRAWN BY DATE CHK SCALE SIZE
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. TOP CP 2 KNOCK-OUTS FOR PDU POWER CORD PERFORTED SINGLE HINGE SPLIT DOOR SIDE PNEL IN SOME
More informationREMOVABLE MOUNT INSTALLATION FOR TRUCK BODIES For truck bodies only, not for trailers. Recommended for use with Dump Beds. See Drawing F.
REMOVBLE MOUNT INSTLLTION FOR TRUCK BODIES For truck bodies only, not for trailers. Recommended for use with Dump Beds. See Drawing 102468F. IMPORTNT. Safe and reliable operation of Donkey mounting kits
More informationTOP CAP KNOCK-OUTS FOR
2 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP.. VISIT OUR ON-LINE CTLOG T WWW.PNDUIT.COM FOR LIST OF CURRENT PRTS PPLICLE FOR TOP CP
More informationDIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
More informationOPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT
L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND
More informationCCS-810 KIT SERIES INSTRUCTION SHEET
(COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED
More informationLincoln Under-cabinet Light Installation Instructions
Lincoln Under-cbinet Light Instlltion Instructions #1500178 Rev A Congrtultions on your new Lincoln Under-cbinet Light! Whether purchsed for its significnt energy svings nd efficiency, lower lifetime costs,
More informationMSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. CAD data is downloadable from our web. Available in 16 sizes. Screws are not appeared on the surface.
MSR SERIES MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our web. Avilble rnge -30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce. Esy to punching or hole milling on front nd rer
More informationSTANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
More informationGROUNDING & BONDING PRODUCTS
GROUNDING & BONDING PRODUCTS Busbars Page 5-3 Insulators Page 5-8 Grounding Products Page 5-9 Compression Tools, Lugs & Taps Page 5-14 Learn About CPI s Extended Limited Warranties for coverage of (2)
More informationBASIC SPECIFICATIONS AND DIMENSIONS - DESIGNER MODELS
BSIC SPECIFICTIONS ND DIMENSIONS - DESIGNER MODELS 30 W. MODELS DESCRIPTION DDFB304 DDRB304 Overall Width Overall Height from Bottom 30 (76.2 cm) Min. 82 3/4 (210.2 cm) to Max. 84 1/16 (213.5 cm) Overall
More informationMODULAR CABINET WITH EXTERNAL DOORS
MODULR CBINET WITH EXTERNL DOORS / The solution is composed by: E NUX structure and bottom with adjustable cable entry manufactured from high-strength low-alloy sheet steel roof manufactured from sheet
More informationAMP AIR SUSPENSION KITS. HP10193: Ford F-250/350 4WD* Ford F-450* HP10194: Ford F-250/350 2WD* Ford F-450*
MP IR SUSPENSION KITS HP10193: Ford F-250/350 4WD* Ford F-450* HP10194: Ford F-250/350 2WD* Ford F-450* LL KITS FOR TRUCKS INCLUDING IN-ED HITCHES; NOT FOR USE WITH CHSSIS C TRUCKS * See application guide
More informationPrinted copies are uncontrolled Before using this document, check shared drive for current revision
Title: 6550-655 Drop rm Care Cliner Parts List Page of 3 D 404500 CSTER, STEEL 5" TOTL LOCK 4 VERSION,E 400550 CSTER, NYLON 5" TOTL LOCK (NO LONGER VILBLE) 3,C,E 400560 CSTER, NYLON 5" DIRECTNL LOCK (NO
More informationCS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationBeam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
More informationBURNISHER ANTI-VIBRATION KIT
56383233 URNISHER NTI-VIRTION KIT Item Ref. No. Qty Description [ ] 56090160 1 Instruction Sheet 1 56001878 1 Scr-Hex 1/4-20 X 1.25 2# DELETED 3# 56109766 2 Screw utton Head 1/4-20 X.63 4 56002155 4 Scr-Hex
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS
More information203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More informationPOWER BUTTON: 25mm (1") CONDUIT X 3048mm (10'-0") LONG TO HOUSE POWER AND CONTROL CABLES (SUPPLIED BY DIEBOLD)
R Easy-aire GX PNEUMTIC DELIVERY SYSTEM 24mm(") DI. PNEUMTIC TUBE SYSTEM 86G OPERTOR ND 8G CUSTOMER DETILS L962 CLL -8-999-6 OPERTOR CONTROL PNEL PROJECTION FILE NO. 8-26 REV. SUBJECT TO CHNGE W ITHOUT
More information152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:
2mm ") DI. POINT TO POINT SYSTEM PVC OR STEEL SYSTEM L84 CLL -800--600 TYPE I ND TYPE II OVERHED UNITS 4 6 ") ( 8 ") 6 8 ") ( -0 PLN VIEW 20 (8 28 8 ") ( 8 ") 4 ( -4") 2 (4 ( 8 ") 28 ( 8 ") THE TYPE I
More informationClearSpan Curtain Tube Support System with Electric Drive Motor (300w)
ClearSpan Curtain Tube Support System with Electric Drive Motor (300w) TTENTION: This guide describes the assembly and installation of roll-up curtains. The design flexibility of these curtain systems
More informationINSTALLATION INSTRUCTIONS FOR SLOAN SF ELECTRONIC SENSOR ACTIVATED LAVATORY FAUCETS
Code No. 0816496 Rev. 2 (02/09) INSTLLTION INSTRUCTIONS FOR SLON SF ELECTRONIC SENSOR CTIVTED LVTORY FUCETS SF SERIES FUCETS SF-2100 Series Transformer Powered with attery ackup, Sensor ctivated, Pedestal
More informationToyota Tacoma TB TG
INSTLLTION INSTRUTIONS FOR PRT 99-84 KIT FETURES PPLITIONS Toyota Tacoma 005-009 99-84T 99-84TG DIN Head Unit Provision With Pocket ISO DIN Head Unit Provision With Pocket Double DIN Head Unit Provision
More informationParts and Accessory Catalog
Parts and ccessory Catalog Visit www.carry-ontrailer.com Storage and Cargo Management ccessories xles, Hubs and Brakes Tires and Fenders Couplers and Safety Cha ns Light ng Suspens on and Hardware Published
More informationSome models are supplied with a protective film on steel and aluminium parts. This film must be removed before installing/using the appliance.
ELECTRIC RNGE for residential use only R Models: VEFSEE 304 P.. INSTLLTION INSTRUCTIONS IMPORTNT - PLESE RED ND FOLLOW Before beginning, please read these instructions completely and carefully. Do not
More informationMISCELLANEOUS INDEX PAGE DATE SERIES DESCRIPTION
MISCELLNEOUS INDEX 08/01/11 PGE DTE SERIES DESCRIPTION M-1 08/01/11 Miscellaneous Index M-2 04/16/96 M01 Tooling all M-3 04/16/96 M02 Scrap Chute Hook and Retainer racket M-4 01/03/95 M03 Scrap Chute Chain
More information1000 SERIES SURFACE MOUNTED CLOSERS
1000 SERIES SURFCE MOUNTED CLOSERS PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/ transom without adapter plates.
More informationEXTERIOR GROUP CONTENTS FRONT BUMPER ASSEMBLY AND RADIATOR GRILLE REAR WIPER AND WASHER REAR BUMPER ASSEMBLY...
51-1 GROUP 51 CONTENTS FRONT BUMPER SSEMBLY ND RDITOR GRILLE.............. 51-2 REMOVL ND INSTLLTION........ 51-2 DISSSEMBLY ND SSEMBLY....... 51-3 RER BUMPER SSEMBLY...... 51-4 REMOVL ND INSTLLTION........
More informationAppendix E D791 and T791 Head and Valve Holddown Assembly Details
Appendix E D nd T Hed nd Vlve Holddown Assemly Detils Hed First Stge Holddown Assemly (") Suction with Unloder Suction (Stndrd) First Stge Holddown Assemly (") Dischrge See figure A 0 CAUTION: Alwys relieve
More informationMODELS GED/GSD, eged/egsd, DFE/DFS, DDE/DDS
LINE OVERVIEW Jenco s Direct Drive Sidewall Propeller line is designed to exhaust or supply large volumes of air at relatively low static pressures. With 3 types of construction, the direct drive models
More informationTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. DUL HINGE PERFORTED FRONT SPLIT SIDE PNEL SOLID SELED RER SPLIT SIDE PNEL VED REDY INTEGRL
More informationKenstan L O C K C O M P A N Y. Strikes and Mounting Plates. Mounting Plates and Gang Lock Hardware. Ratchet Bars and Miscellaneous
Volume 5 C a t a l o g L O C K C O M P N Y ccessories 2 S V E X Face Sleeves, Collars and Spacers 1 Spacers and Washers 2 Washers and Strikes 3 Strikes and Mounting Plates 4 Mounting Plates 5 Mounting
More informationWARNING: IF THERE ARE ANY DISCREPANCIES BETWEEN THE CAD FILE AND THE DRAWING, THE DRAWING WILL TAKE PRECEDENCE. IF IN DOUBT, ASK.
28.48 DJUSTLE 5.64 19.78 DJUSTLE D 8 7 6 5 4 3 2 1 20.37 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D 51.80 48.00 9.57 C C 18.00
More informationABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets
ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd
More informationSpark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
More informationQ-TRIX R50 & Q-HEX MINI
Q-TRIX R50 & Q-HEX MINI INSTLLTION INSTRUCTION Q-TRIX R50 Q-HEX Mini Cautions The Main Secondary wiring is intended for shallow burial - Less than 6 inches (152mm) unless Q-Tran direct burial Q-Wire and
More information[1200mm] 5" [125 mm] 2 3/4" [70mm] [2600mm] [450mm]
MIN 9'-10 1/2" [3010mm] 9'- CR 8'-6"MIN [2825mm] 6'-0" 12" S [2550mm] CR [1800mm] ON SIDE PLN "" 8'-8" CR 2 [2600mm] 6'-0" CR [1800mm] 2 FRONT ND RER S [55mm] 8'-6" [2550mm] [55mm] [125 mm] 2 [70mm] 6
More information00083FAB-DC DRAWN BY DATE CHK SCALE SIZE
D0D/6 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. 0 5/4/8 SPLIT SIDE PNEL JGC TOP CP CURVED PERFORTED SINGLE HINGE DOOR SPLIT SIDE PNEL
More informationHonda Ridgeline
INSTLLTION INSTRUCTIONS FOR PRT 99-7870 99-7870G/99-7870T KIT FETURES DIN Head Unit Provision With Pocket ISO DIN Head Unit Provision With Pocket Painted To Match Factory Dash: G = GRY, T= TN WIRING ND
More informationMODEL 1200 WATER WHEEL TRANSPLANTER OPERATING MANUAL
MODEL 1200 WATER WHEEL TRANSPLANTER OPERATING MANUAL Tble Of Contents Axle, Tire... 3 Fetures... 13 Foot Rest... 4 Helpful Tips... 14 Options... 13 Prts Brekdown, Description...10-12 Prts Brekdown, Exploded
More informationIMPORTANT NOTE: Throughout this guide, dimensions may vary by ± 1 /8" (3).
SUB-ZERO DESIGN GUIDE Contents Built-In Refrigeration.......................... 3 PRO 48 Refrigeration......................... 44 Integrated Refrigeration...................... 50 Wine Storage...............................
More informationTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 2 TOP CP PERFORTED SINGLE HINGE KNOCK-OUTS FOR PDU POWER CORD SIDE PNEL RER PERFORTED
More informationMSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. Technical data Protection class IP40. CAD data is downloadable from our website.
MSR SERIES Technicl dt Protection clss IP40 MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our website. Avilble rnge W-30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce for sophisticted
More informationany server any environment one source
any server any environment one source For more information, please contact WDM, Inc. Phone: (800) 448-1881 or (650) 363-2791 Fax: (650) 363-2825 www.wdminc.com or e-mail to info@wdminc.com legendary reliability
More informationGROUP 51 CONTENTS WARNINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES
5- GROUP 5 CONTENTS FRONT BUMPER SSEMBLY 5- SPECIL TOOL 5- FRONT BUMPER SSEMBLY 5- REMOVL ND INSTLLTION 5- DISSSEMBLY ND SSEMBLY 5-5 RER BUMPER SSEMBLY 5-7 SPECIL TOOL 5-7 RER BUMPER SSEMBLY 5-7 REMOVL
More informationDetroit Speed, Inc. Rear Coilover Tower Brace Kit Camaro P/N:
Detroit Speed, Inc. Rear Coilover Tower Brace Kit 2016+ Camaro P/N: 042433 The Detroit Speed, Inc. 2016+ Camaro Rear Coilover Tower Brace Kit is a bolt-in design that increases overall vehicle stiffness.
More informationSCC Inc. BRx Series. Technical Instructions. Document No. CPBK-2000 September 15, BR-AS Bracket Assemblies for use with SQM Actuators
SCC Inc. BRx Series BR-AS Bracket Assemblies for use with SQM Actuators Technical Instructions September 15, 2015 Description Features Application BRx series bracket assemblies installed with Cxx series
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INC. APPLICATION: 2006-2008 FORD F-150 PART NUMBER: 45-92010, 40-92015 WINCH MOUNTED SPORTSMAN GRILLE GUARD ITEM QUANTITY ITEM DESCRIPTION TOOLS NEEDED 1
More informationEcoVision EZ Door Upgrade for D6 Kysor Warren Multi-deck Merchandisers
EcoVision EZ Door Upgrade for D6 Kysor Warren Multi-deck Merchandisers Installation & Operation Manual IMPORTNT Keep in store for future reference! MNUL- I/O ECOVISION EZ D6 KYSOR WRREN P/N 0562619_D May
More informationDIESEL EGT GAUGE INSTALLATION INSTRUCTIONS P14D AA
DIESEL EGT GUGE INSTLLTION INSTRUCTIONS P4D4-9235- Revision: - Dated 3/9/4 Replaces: None DIESEL EGT GUGE INSTLLTION HRDWRE CONTENTS P4D4-44- - DIESEL EGT GUGE KIT COMPONENT - DIESEL EGT GUGE SSY (PRT
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationTrunk and Jack. Camaro. Retail Catalog. May Edition. D Classic & Automotive R. The nation's largest complete source for Camaro parts.
Trunk and ack May 2009 Edition Camaro etail Catalog D Classic & utomotive The nation's largest complete source for Camaro parts. T 344 D & Classic utomotive Camaro Catalog Trunk and ack 2009 Deluxe ack
More informationEmcor 10 Series Catalog
Emcor 10 Series Catalog www.emcorenclosures.com 507-287-3535 Our objective is to define our customer s quality requirements, and to produce products and services that meet or exceed those expectations.
More informationEXTERIOR GROUP CONTENTS FRONT BUMPER ASSEMBLY REAR WIPER AND WASHER REAR BUMPER ASSEMBLY
5- GROUP 5 CONTENTS FRONT BUMPER SSEMBLY..... 5- SPECIL TOOL..................... 5- REMOVL ND INSTLLTION........ 5- DISSSEMBLY ND RESSEMBLY..... 5- RER BUMPER SSEMBLY...... 5-6 SPECIL TOOL.....................
More informationEmcor ESQ Catalog
Emcor ESQ Catalog www.emcorenclosures.com 507-287-3535 Our objective is to define our customer s quality requirements, and to produce products and services that meet or exceed those expectations. We are
More informationHi-Tech specially designed components allow for fast and easy assembly.
OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces
More informationJob Sheet 3. Pump Installation OBJECTIVE PROCEDURE. Installation of the Motor and Centrifugal Pump on the Pump Universal Base
Job Sheet 3 Pump Instlltion OBJECTIVE To instll pump, perform shft lignment, nd instll coupling. PROCEDURE Before proceeding with this job, complete the sfety check list in Appendix B. Instlltion of the
More informationCable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
More informationMiscellaneous Fittings
B214 R&L REEL RCK SUPPORT FOR (32) PIPE 200 Lbs. (90.7 kg) B514 R&L REEL RCK SUPPORT FOR 2 (50) PIPE 246 Lbs. (111.6 kg) 3 5 /8 (92.1) 3 5 /8 (92.1) B214R Right Hand B214L Left Hand B514R Right Hand B514L
More informationFREE-STANDING ENCLOSURE ACCESSORIES FREE-STANDING ENCLOSURE ACCESSORIES. Swing-Out Panels. Panels (Full & Half Length) For Single-Door Enclosures
118 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 11 ENCLOSURE Panels (Full & Half Length) For Single-Door Enclosures Panels for single-door enclosures can
More information229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
More information1000 Series surface mounted closers
1000 surface mounted closers PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/4 transom without adapter plates.
More informationBILT INDUSTRIES, INC.
BILT INDUSTRIES, INC. What you appreciated as Frick-Gallagher is now BILT. BILT with powder coating. QUICK-BILT KLIP-BILT SPEEDI-BILT National Sales Office 801 W. Markey Road Belton, Missouri 64012 Phone:
More information