IMS ACCESSORIES 166 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST. End Plate. (Industrial Modular System) End Plate. Single Door Plinth Base
|
|
- Maurice Barrett
- 5 years ago
- Views:
Transcription
1 Modular Enclosures 166 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST End Plate Designed to provide a sealed cover for the open end of enclosures. Provides additional wiring space along the side of the enclosure. Gasket and mounting hardware is included. Made of heavy gauge steel and powder coated white. End Plate Catalog Height Enclosure Width Enclosure Product List No. (A) Ref. mm Height (B) Ref. mm Depth Code Price SCE-EP P SCE-EP P SCE-EP P SCE-EP P End Plate Plinth Base Designed to install under an enclosure to provide space for cables to enter from below and raise the enclosure up off the floor. Plinth bases are stackable to acquire desired height off the floor. Black textured powder coat finish. Single Door Plinth Base Red. mm Catalog Height Height Width Enclosure Depth Enclosure Product List No. (A) (A) (B) Ref. mm Width (C) Ref. mm Depth Code Price SCE-P P SCE-P P SCE-P P SCE-P P SCE-P P SCE-P P Two Door Plinth Base Ref. mm Catalog Height Height Width Enclosure Depth Enclosure Product List No. (A) (A) (B) Ref. mm Width (C) Ref. mm Depth Code Price SCE-P P SCE-P P SCE-P P SCE-P P SCE-P P SCE-P P Plinth Base
2 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 167 Single Door Galvanized Sub-Panel Ref. mm Ref/. mm Catalog Height Height Enclosure Width Width Enclosure Product List No. (A) (A) Ref. mm Height (B) (B) Ref. mm Width Code Price SCE-SP1806G & 1200 P SCE-SP1808G & 1600 P SCE-SP1809G & 1800 P SCE-SP1810G P SCE-SP2006G & 1200 P SCE-SP2008G & 1600 P SCE-SP2009G & 1800 P SCE-SP2010G P Two Door Galvanized Sub-Panel Ref. mm Ref. mm Catalog Height Height Enclosure Width Width 2 Piece Enclosure Product List No. (A) (A) Ref. mm Height (B) (B) Sub-panel Ref. mm Width Code Price SCE-SP1812G P SCE-SP1816G * 1600 P SCE-SP1818G * 1800 P SCE-SP2012G P SCE-SP2016G * 1600 P SCE-SP2018G * 1800 P Galvanized Sub-Panel Sub-panels are constructed from galvanized steel for direct bonding of electrical components. * 2 piece sub-panels are manufactured as two separate pieces and designed to be bolted together. Bolt pack included. Modular Enclosures Galvanized Sub Panel Barrier Plate Catalog Height Enclosure Width Enclosure Product List No. (A) Ref. mm Height (B) Ref. mm Depth Code Price SCE-BP P SCE-BP P SCE-BP P SCE-BP P Barrier Plate Designed to serve as a barrier between two enclosure sections. Mounting holes. Gasket is included. Made of heavy gauge carbon steel and powder coated white. Bolt Pack SCE-BK sold separately.
3 168 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Galvanized Filler Plates Filler Plates (Galvanized) Catalog Height Ref. mm Width Ref. mm Enclosure Product List No. (A) Height (A) (B) Width(B) Ref. mm Height Code Price SCE-FP18G P SCE-FP20G P Designed to provide additional mounting surface between sub-panels or sections of a modular enclosure. Slotted mounting holes allow flexible installation. Filler Plate Modular Enclosures Sub-Panel Mounting Strap Designed to provide additional mounting to the center of sub-panels on the right and left sides of a modular enclosure. Made of galvannealed material. Sub-Panel Mounting Strap Catalog Length Ref. mm Enclosure Parts Product List No. (C) Length (C) Ref. mm Depth Per Kit Code Price SCE-SPMP P SCE-SPMP P Sub-Panel Mounting Strap U-Shape Rack Angles Designed for use in enclosure to provide provisions for the installation of rack mounted equipment and allow position at the desired rack mounting width and depth. Made of galvannealed material and powder coated white. U-Shape Rack Angles Catalog Height Ref. mm Enclosure Quantity Product List No. (A) Height (A) Ref. mm Height Per Kit Code Price SCE-URA P SCE-URA P L-Shape Rack Angles L-Shape Rack Angles Designed for use in enclosure to provide provisions for the installation of rack mounted equipment and allow position at the desired rack mounting width and depth. Made of galvannealed material and powder coated white. Catalog Height Ref. mm Enclosure Quantity Product List No. (A) Height (A) Ref. mm Height Per Kit Code Price SCE-LRA P SCE-LRA P
4 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 169 Top End Mounting Grid SCE-TEMG P Top End Mounting Grid Designed to provide a flexible extension to the mounting system. Top-end grid to be installed in the top of the enclosure between the mounting channel and the side of the enclosure. Made of galvannealed material. End Mounting Grid SCE-EMG P End Mounting Grid Designed to provide a flexible extension to the mounting system. End grid to be attached to the mounting channel in the top or bottom of the enclosure. Made of galvannealed material. Modular Enclosures Filler Mounting Grid Catalog Length Ref. mm Enclosure Quantity Product List No. (C) Length (C) Ref. mm Width Per Kit Code Price SCE-FMG P SCE-FMG & P SCE-FMG & P SCE-FMG & P SCE-FMG P SCE-FMG , 1600 & P Filler Mounting Grid Designed to provide a flexible extension to the internal mounting system. Filler grid to be installed between the mounting channels and top or bottom of the modular enclosure. Made of galvannealed material. Filler Mounting Grid
5 170 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Horizontal Mounting Grid Designed to provide a horizontal extension of the frame holes in the sides of a modular enclosure. Sold in sets of two with mounting hardware included. Made of galvannealed material. Horizontal Mounting Grid Modular Enclosures Horizontal Mounting Angle Catalog Width Ref. mm Quantity Product List No. (B) Width (B) Per Kit Code Price SCE-HMG P SCE-HMG P SCE-HMG P SCE-HMG P SCE-HMG P SCE-HMG P SCE-HMG P SCE-HMG P Vertical Mounting Grid Designed to provide a vertical extension from top to bottom of the enclosure. sold in sets of two and mounting hardware is included. Made of galvannealed material. Vertical Mounting Grid With Angle Mounting Brackets Catalog Height Ref. mm Enclosure Quantity Product List No. (A) Height (A) Ref. mm Height Per Kit Code Price SCE-VMG P SCE-VMG P Vertical Mounting Grid
6 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 171 Grid Mounting Angle SCE-GMA P Grid Mounting Angle Designed to provide flexible mounting of horizontal and vertical mounting grids. Made of galvannealed material. Floor Mounting Angles SCE-FMA P Floor Mounting Angles Designed for use with enclosures when the enclosure must be secured to the floor. Kit contains four floor mounting angles and mounting hardware. Powder coated Black Texture. Modular Enclosures Floor Mounting Angle Dead Front/Swing Panel Ref. mm Ref. mm Catalog Height Height Width Width Enclosure Enclosure Product List No. (A) (A) (B) (B) Ref. mm Height Ref. mm Width Code Price SCE-DF & 1200 P SCE-DF & 1600 P SCE-DF P SCE-DF P SCE-DF & 1200 P SCE-DF & 1600 P SCE-DF P SCE-DF P Dead Front/Swing Panel Designed for installation into enclosures, to be installed in the front of an enclosure and to swing out of the enclosure. Kit consists of heavy gauge brackets, hinges, and mounting hardware. Installed by detaching door hinge from enclosure and installing swing out panel kit to the existing holes and hinge supplied with the enclosure. Made of heavy gauge steel and powder coated white. Dead Front/Swing Panel
7 172 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Nut Retainer Designed to install in the square holes provided in mounting grids. Nut Retainer Catalog Quantity Product List No. Size Per Kit Code Price SCE-NR P SCE-NR120 1/ P Modular Enclosures Channel Nuts Designed for use in enclosures to allow mounting of additional equipment. Channel Nuts Catalog Quantity Product List No. Size Per Kit Code Price SCE-PS / P2 6.9 SCE-PS51618CN 5/ P Main Single Door Mechanical Interlock Interlock kit designed for use on the main door of single door enclosures. Main Two Door Mechanical Interlock Interlock kit designed for use on the main door of two door enclosures. Slave Door Mechanical Interlock Interlock kit designed for use on the slave door of enclosures. Main Single Door Mechanical Interlock SCE-MDMI P Main Two Door Mechanical Interlock SCE-MDMI P Slave Door Mechanical Interlock SCE-SDMI P Bolt Pack Designed to be used as an additional gasket or to replace gasket kits when changing modular enclosure configurations. Includes oil resistant gasket and zinc coated nuts and bolts. Required when bolting one enclosure to another. Bolt Pack SCE-BK P5 2.00
SERIES 14 SINGLE DOOR CONSOLES TECHNICAL DATA
Operator System Enclosures 1 12 SAGINAW CONTROL ENGINEERING STOCK PRICE LIST SAGINAW CONTROL ENGINEERING STOCK PRICE LIST 13 Series 1 Single Door Consoles Application - Designed for electronic controls
More informationFREE-STANDING ENCLOSURE ACCESSORIES FREE-STANDING ENCLOSURE ACCESSORIES. Swing-Out Panels. Panels (Full & Half Length) For Single-Door Enclosures
118 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 11 ENCLOSURE Panels (Full & Half Length) For Single-Door Enclosures Panels for single-door enclosures can
More information133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s are designed for control and instrumentation applications. They are a general-purpose enclosure intended for indoor use
More informationOperator System Enclosures
27 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 Operator Systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC s, monitors,
More informationRACK ANGLES OVERVIEW. Standard Product
SPEC-01200 PROLINE G2 Internal Components Rack-Mount Angles and Accessories RACK ANGLES OVERVIEW All Rack Angles have two mounting surfaces that serve as mounts for both rack equipment and rack accessories.
More informationQuality Products. Service Excellence.
183 Enclosures Enclosures - HME Series Single Door Enclosure NEMA 12...185 Enclosures - HMET Series Double Door Enclosure NEMA 12...187 Enclosures - HFMD/HFMDT Series Disconnect Enclosure NEMA 12...189
More informationFull Subpanel. Additional Mounting Hardware
Spec-00431 PROLINE Internal Components Panel and Grid Mounting System Full Subpanel PROLINE subpanels are designed to provide maximum panel depth, panel size and ease of installation. Full subpanels slide
More informationType 4 Panel Enclosures
Wall-Mount Enclosures Type 4 Premier Series with Quarter-Turn Latches Data Sheet and Catalog Number Accessories Premier panels NEMA panel adapters Depth adjustment brackets Print pockets Padlockable or
More informationType 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
More informationOperator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
More informationCONCEPT Wall-Mount Enclosure Accessories
CONCEPT Wall-Mount Enclosure Accessories The CONCEPT Enclosure Group Accessory Selection Guide Steel section 4 or Stainless Steel Enclosures section 6 Steel section 4 or Stainless Steel Window-Door Enclosures
More informationPushbutton Enclosures
7 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 are designed to house oil-tight pushbuttons, switches, and pilot lights. These enclosures are primarily used in
More informationType 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
More informationCatalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in. (762 x 762 mm)
SPEC-00186 CONCEPT Accessories CONCEPT Accessories CONCEPT PANEL CONVERSION KIT Conversion Kit adapts enclosure for mounting standard NEMA-style panels in CONCEPT enclosures. Bracket attaches to rear collar
More informationType 4X Panel Enclosures
Ground-Mount Enclosures Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing
More informationTable Top Rack Cabinets (RCHS Series) - HEAVY DUTY. Features:
Table Top Rack Cabinets (RCHS Series) - HEAVY DUTY Path: Home > Rack Index > Table Top Rack Cabinets (RCHS Series) Features: Textured - (RAL7035) Heavy duty, 16-gauge steel, 19 rack mount - table top cabinet.
More informationType 4 Panel Enclosures
Ground-Mount Enclosures Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Easy access panels or
More informationModular Enclosure Solutions Specifier s Guide
Modular Enclosure Solutions Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 1 The Next Generation Modular Enclosure Stronger. Faster. Easier. You ve already spent tens of thousands
More informationTS 8 Specification Guide
TS 8 Specification Guide Ingeniously simple, fully syetrical, and patented worldwide... this is the successful formula behind Rittal s TS 8 bayed enclosure system Rittal s modular design allows for efficient
More informationPanel, 18.20x14.20, Bulletin CWP (CONCEPT Enclosure Panels),
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Material Material, Color, and Finish
More informationCONCEPT Accessories. Catalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in.
Spec-00186 KPH FX (763) 422-2600 422-2211 Accessories CONCEPT Accessories Accessories: CONCEPT Conversion Kit Conversion Kit adapts enclosure for mounting standard NEMAstyle panels in CONCEPT enclosures.
More informationMODULAR CONTROL DESKS
MODULAR CONTROL DESKS BOX AE W=600/800 W=1200/1600 Structure manufactured from 1.5 mm thick press bent sheet steel and door manufactured from 1.5 mm thick sheet steel with lateral stiffening cover and
More informationACCESSORIES FOR SZE2 CABINETS
ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked
More informationStandards ANSI/EIA RS-310-D IEC DIN41494, PART1 DIN41494, PART7 Compatible with 19 International Standards, ETSI
Product Overview Mini5 19 Floor Standing Enclosures are ideal for LAN cabling & network equipment/server rack applications. Cabinets are available in 18U, 27U, 42U and 47U heights in various widths and
More informationDisconnect Enclosures
Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508
More informationPremium Quality - Value Price
ACE 19" RACK SYSTEMS 1 VS 7000, Super Efficient Global IT Rack Designed ready to install and meeting international standard and of Top-quality. Two 19" mounting multi-functional profiles create a solid
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationKnürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
More informationMONOBLOC CONTROL DESKS
MONOBLOC CONTROL DESKS Enclosure manufactured from 1.5 mm thick press bent sheet steel provided with front door manufactured from 1.5 mm thick sheet steel with lateral stiffening cover, and upper panel
More informationFrame Joining Kits. Free-Stand Cabinets PROLINE Accessories
Spec-00212 Free-Stand Cabinets PROLINE Accessories Frame Joining Kits Permits joining two enclosure frames while maintaining an environmental seal. Side-to-Side Joining Kit consists of six frame nuts and
More informationHeavy-Duty Enclosures Type 12 Free Standing Disconnect with Sub Panel
eavy-uty Enclosures PPLICTIONS - esigned to provide protection for electrical instruments, terminals, and controls from dust, oil, dirt and dripping liquids. CONSTRUCTION - abricated from 10 gauge carbon
More informationINDUSTRIAL SOLUTIONS Wallmount Enclosures...pgs IND 1-46 Wireway/Trough...pgs IND Freestanding Enclosures...pgs IND FMD Enclosures...
INDUSTRIL SOLUTIONS Wallmount s...pgs IND 1-46 Wireway/Trough...pgs IND 47-60 Freestanding s...pgs IND 61-72 FMD s...pgs IND 73-86 Operator Interface...pgs IND 87-136 Noncorrosive...pgs IND 137-193 I N
More informationRMR Free-Standing Enclosures
Protecting your technology investment. RMR Free-Standing Enclosures provide NEMA Type 4 and 12 protection for large electronic components and controls that require sturdy mounting. ADVANTAGES Advanced
More informationBases And Accessories
12.5 12.5 Bases And Accessories 37.5 37.5 50 1 100 Ø 8.5 14 30 Plinths And Cable Bases For AE Plinths And Cable Bases For AK Plinths And Cable Bases For PS 1 100 62.5 62.5 32.5 32.5 W T 18 x 14 30 52.5
More informationType 4 X Panel Enclosures
Ground-Mount s Type 4X ouble-oor EnviroShield Free-Standing with 3-Point Locking ata Sheet ccessories Full and half panels Side panels Swing panels Touch-up paint Mounting legs Rack angles Swing out frames
More informationchannel bracket 1.50 (38) flat strap shaded area is useable space
Electrical JIC Terminal Strap Kit JIC Terminal Strap Kits fit all styles and types of JIC enclosures. The kits are furnished with flat straps for mounting Flat Based Terminal Blocks, (see Flat Based Terminal
More informationCABINET OPTIONS AND DESIGNATORS CODE LETTERS
CABINET OPTIONS AND DESIGNATORS Hinges: ~Stainless steel lift off Nuts and Bolts: ~ Stainless steel Hardware: ~ Handles and Corbin locks are stainless steel or zinc plated Windows: ~ Lexan Backboards:
More informationPROLINE Accessories PJ2F PJ2FD PJ2FHF2 PJ2FF PJ2FBF
Spec-00212 PROLINE BPH FX (763) 422-2588 422-2661 Accessories Free-Stand Networking Cabinets Frame Joining Kits Permits joining two enclosure frames while maintaining an environmental seal. Side-to-Side
More informationCONNECT AND PROTECT. ProLine G2. The Next Generation Modular Solution
CONNECT AND PROTECT ProLine G2 The Next Generation Modular Solution The Next Generation Modular Enclosure Stronger. Faster. Easier. You ve already spent tens of thousands of dollars and hours designing
More informationBOXES WALL-MOUNTING BOXES AND TERMINAL BOXES
BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES ST WALL-MOUNTING BOXES WITH BLANK DOOR STP WALL-MOUNTING BOXES WITH PLEXI DOOR ST/STP COMPLEMENTARY ACCESSORIES SDV TERMINAL BOXES WITH SCREWED COVER SDF TERMINAL
More informationHME Series Modular Enclosure System
HME Series Modular Enclosure System One Door Cabinets Two Door Cabinets Flange Disconnect Cabinets Easy Install Panel Grid Mounting System Cooling Products Accessories Doors feature easy to remove hinges
More informationBOXES SOLUTIONS. BOXES
BOXES SOLUTIONS - wide range of dimensions: over 40 enclosures with blank door, 19 models with glazed door, enclosures with single blank door, double door with rod system and enclosure with single glazed
More informationWall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type 12
763.422.2600 SPEC-00245 L763.422.2211 DISCONNECT WALL-MOUNT PREFERRED-CUTOUT DISCONNECTS PREFERRED CUTOUT, DISCONNECTS, TYPE 12 Wall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type
More information1.6 Accessories include tool-free snap-in technology options for air flow, cable management, shelves, power distribution units, etc.
Rittal TS IT Rack Guide Specifications TS IT network server enclosure 1.0 General Description 1.1 Modular Free Standing Equipment Cabinet 1.2 Various combinations of dimensions: 1.2.1 Height: 48 /1200mm,
More information600 SWINGING FRAME ATTR characteristics. CE-TEK standard epoxy polyester powder coating. Colour: RAL 7032 textured finish.
1 of 9 RACK 19 19 swinging frames 600 SWINGING FRAME Frame manufactured from pressbent rails in 1.5mm sheet steel and 2mm box-shaped horizontal profiles that give high strength. Colour: RAL 7032 textured
More informationClimateCab Cabinets and Accessories
Product Data Sheet ClimateCab Cabinets and Accessories» Free-standing ClimateCabs include a NEMA 12 Cabinet with M6 or tapped rails, plus a 5000-, 8000-, or 12,000-BTU digitally controlled air-conditioning
More informationRMR Standard Wall-Mount Enclosures
Protecting your technology investment. RMR Standard Wall-Mount Enclosures provide NEMA Type 4 and 12 protection for smaller electronic components and controls that require sturdy wall mounting. ADVANTAGES
More informationSTX stainless steel boxes
STX stainless steel boxes Enclosure and door manufactured from AISI 304 stainless steel (AISI 316 on request). Mounting plate manufactured from 2.5mm sendzimir sheet steel. Hinge in stainless steel. Box
More informationStandard Product Low Profile Type 12 One-Door Disconnect Enclosures
763.422.2600 Spec-00005 M763.422.2211 Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Low-Profile, One- to Five-Door
More informationEN4DSC Disconnect Enclosures - NEMA 4 ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex, Square D
EN4DSC Disconnect Enclosures - NEMA 4 Application Designed to house the following safety disconnect equipment: ABB Controls flange mounted variable depth operating mechanisms for disconnect switches and
More informationType 4 Panel Enclosures
Free-Standing ccessories Type 4 Single-oor Full and Half Panel Illustration Sheet and atalog Number iscount Schedule: 2 Subclass: S Full Panel (Single-oor) Panel Panel Size Fits atalog x Number in. mm
More informationHinges. Truckline Inc. Call Us at Tel: HINGES 8-1. Truck & Trailer Body Parts Mfg. & Sales
` Hinges Aluminum Hinges Stainless Steel Hinges Galvanized Steel Hinges HINGES 8-1 DOOR Hinges TL-Hinge-22-00407 TL-Hinge-22-01047 TL-Hinge-22-01036 TL-Hinge-22-01046 TL-Hinge-22-01041 TL-Hinge-22-01043
More informationEQUIPMENT PROTECTION
PROLINE G2 The Next Generation Modular Solution EQUIPMENT PROTECTION www.pentairprotect.com/hoffman RIGID PROTECTION The Modular Enclosure Solution PROLINE G2 is designed to bear the advanced loads and
More informationCS COMPACT ENCLOSURE. CABINETS. method for lifting uses the same eyebolts as ATB8 cabinets. optional 180 hinges available
CS COMPACT ENCLOSURE method for lifting uses the same eyebolts as ATB8 cabinets optional 180 hinges available CS enclosures can be wall-mounted using standard SDWC-010 mounting brackets as used on ST Box
More informationRacks M A N A G E M E N T. Premise Connectivity Systems. A N DCable. Racks and Cable Management
Premise Connectivity Systems A N DCable Racks M A N A G E M E N T w w w. s i g n a m a x. c o m Racks and Cable Equipment Racks Vertical Cable Management for Equipment Racks Equipment Shelves Hinged Wall-Mount
More informationEQUIPMENT PROTECTION
PROLINE G2 The Next Generation Modular Solution EQUIPMENT PROTECTION www.pentairprotect.com/hoffman stronger. faster. easier. The Modular Enclosure Solution Hoffman s PROLINE G2 modular solution is designed
More informationPainted polyester powder paint; white Custom colors available
Spec-01198 PROLINE G2 Internal Components Panels and Accessories Full Subpanel (Rear or Side) APPLICATION The PROLINE G2 Subpanel is part of the new patent pending EZ- Load Mounting System which was designed
More informationE-Series Enclosures, Wall Mounts,Table Racks
E-Series Enclosures, Wall Mounts,Table Racks I nt ro d u c t i o n Optima EPS - An Elma Company Optima EPS, an Elma company, is a designer and manufacturer of custom and standard electronic packaging solutions.
More informationServer and Broadband Enclosures a r e t n a P
Pantera Server and Broadband Enclosures Pantera features Frame Features 19 Usable width x 22 and 24 overall width 25U, 40U, 45U, 48U Heights (1.75 = 1U) Depth (overall) 31.00, 39.00 Inverted caster/leveler
More information56-SDMS-07 REV. 01 SPECIFICATIONS FOR
56-SDMS-07 REV. 01 SPECIFICATIONS FOR UNIT SUBSTATIONS UP TO 36 kv ALUMINUM TRANSFORMER ALUMINUM BUS BARS LVDP This specification is property of SEC and subject to change or modification without any notice
More informationMEH Series Sectionalizing Enclosures. Single-Phase and Three-Phase
MEH Series Sectionalizing Enclosures Single-Phase and Three-Phase ABB MEH Sectionalizing Enclosures ABB s MEH Sectionalizing Enclosures provide an economical and safe sectionalizing tap point for underground
More informationWall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
More informationEmcor 10 Series Catalog
Emcor 10 Series Catalog www.emcorenclosures.com 507-287-3535 Our objective is to define our customer s quality requirements, and to produce products and services that meet or exceed those expectations.
More informationGuides (s-3482) Slides (s-2568) Rack-Mount Accessories. Accessories: Mounting Accessories
Spec-00500 D(763) 422-2211 422-2600 Accessories Mounting Accessories Guides (s-3482) 14 gauge steel chassis guides mount between two pairs of rackmounting angles that have accessory mounting legs. Guides
More informationATB8 MONOBLOC CABINET
ATB8 MONOBLOC CABINET finishing profile frame, roof and sidewall are one integral piece removable back mounting plate included in the supply closing system with: 3 points for H=1600, 4 points for H=1800-2000,
More informationFree-Stand, Single or Dual Access, Type 12
Spec-00291 ree-stand Enclosures Type 12 ree-stand Enclosures ree-stand, Single or Dual Access, Type 12 INDUSTRY STANDARDS UL 508A Listed; Type 12; ile No. E61997 cul Listed per CSA C22.2 No. 94; Type 12;
More informationAMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM.
AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM. Product development was driven by the need to solve troubles of cabinet rack usage as well as to provide a cabinet that will efficient networking, reliability,
More informationONTRAC WIRE MESH CABLE TRAY SYSTEM
P R O D U C T D ATA S H E E T ONTRAC WIRE MESH CABLE TRAY SYSTEM K E Y F E AT U R E S Available in two styles: Shaped and Standard Tray Easy to use pathway solution that supports large quantities of network
More informationCommercial Boxes and Enclosures COM-24 COM-66
and Count on Hoffman to provide you with off-the-shelf innovation features to save you time and money. Perforated panels make component layout and mounting fast, easy, and flexible. Integral wood panels
More informationNew York City Apartment Metering Meter Sockets / Load Centers
s New York City Apartment Metering Meter Sockets / Load Centers Selection and Application Guide Bulletin RPSA-S0001 Before You Begin... System Parameters Mounting: Indoor only Input: 208Y/120V AC, 3 Phase,
More informationType 12 / 13 Enclosures
Type 12 Free-Standing Enclosures ata Sheet pplication Houses electrical controls and instruments Easy access fixed or swing panels for optional equipment ual-access construction available for back-to-back
More informationOrtronics. Mighty Mo. GX Cabinets. Designed to Perform, Configured to Fit
Ortronics Mighty Mo GX Cabinets Designed to Perform, Configured to Fit Mighty Mo GX Configured By You, Made By Legrand Ortronics 2 Ortronics (adj.) ef fi cient Performing or functioning in the best possible
More informationburner head porting crescents Used on 24", 30" & 36" ranges burner head porting crescents Used on 20" ranges burner head porting slots 3-7/8" 4-1 8"
Peerless Premier eagle - mark royal - modern chef 1388 3-7 8" 8-1/4" crescents 14-3/8" 3-7 8" 1389 Limited quantities available! 1390 8-1/8" 14-1/2" crescents 1391 4-1 2" 4-1/2" Used on 20" ranges 1398
More informationSingle-Sided Storage Rack Assembly Instructions
Single-Sided Storage Rack Assembly Instructions H D I G J K M L F I D B C A E PART NAME QTY A. BASE BAR (50 ) 2 B. BASE BAR HULL GUARD (34 ) 2 C. BASE BAR END CAP 2 D. SAFETY END CAP 4 E. FOOT 4 F. UPRIGHT
More informationKnürr DoubleProRack. 19 Stand-Alone Enclosure
Knürr DoubleProRack Knürr DoubleProRack 19 Stand-Alone Enclosure 1.92 to 1.98 1.91 19 Network Stand- Alone Enclosure Strong points Strong points 1.92 19 Stand-Alone Enclosure 1.94 19 Enclosure Without
More informationEB SERIES INSTRUMENT ENCLOSURES
EB SERIES INSTRUMENT ENCLOSURES EB Series Instrument Enclosures 1 5 2 7 4 6 Multiple-fold 1 gutter type edge provides extra stability and protects against dirt and water when enclosure is opened. Grounding
More informationtype P1 Lighting and Power Distribution Panelboards Overview P1 Panelboards
type P Lighting and Power Distribution Panelboards Specifications Main Breaker: 400A Maximum Main Lugs only: 400A Maximum Voltages: 480Y/277V AC Maximum 250V DC Maximum 3Ø3W, 3Ø4W, Ø3W, Ø2W General P panelboards
More informationINSTALLATION GUIDE CARGO BARRIER CURRENT FORD UTILITY INTERCEPTOR. pro-gard.com STRONG RELIABLE SECURE
INSTALLATION GUIDE CARGO BARRIER 0 - CURRENT FORD UTILITY INTERCEPTOR STRONG RELIABLE SECURE THESE COMPONENTS ARE REQUIRED TO INSTALL THE PRO-GARD BARRIER SYSTEM B00 BARRIER B7 HARDWARE/WING KIT I. Refer
More informationDisconnect Enclosures
Wall-Mount Enclosures Type 12 Flange-Mount....................................................................... 296-298 Wall-Mount Enclosures Type 4 & 4X Premier Series 2-Point or 3-Point Locking..........................
More informationSINGLE DOOR BOXES. PAINT FINISH ETA standard epoxy polyester powder coating. Enclosure and door: colour RAL 7035 textured finish.
ST SINGLE DOOR BOXES Enclosure and door manufactured from 1.5 mm thick sheet steel. Mounting plate manufactured from 2.5 mm thick sendzimir sheet steel. Enclosure and door: colour RAL 7035 textured finish.
More informationQ-LINE SHELVING Shelves
Shelves BOX FORM SHELVES SOLID SHELVES Punched on 1 1 /2" centers for optional bin dividers (BD-ddhh). PERFORATED SHELVES SHELF INFORMATION (Pertains to all shelves on this page.) All shelves are Box Beam
More informationRittal North American Industrial Buyer s Guide
Rittal North American Industrial Buyer s Guide The Rittal Corporation, the U.S. subsidiary of Rittal GmbH & Co. KG in Germany, manufactures the world s leading Industrial and IT enclosures and accessories,
More informationCubicles Frameworks. Enclosures W=400mm. System P. 400 mm deep framework. 600 mm deep framework. Hinged front plate support frame.
Frameworks DD380800 400 mm deep framework DD380572 DD380573 DD380574 08407. Framework width W = 300 mm 08403 W = 400 mm 08404 W = 650 mm 08406 W = 800 mm 08408 W = 800 mm (650 + 150) 08407 b composition
More informationNumber of reducing brackets required to accommodate 19- and 23-in. equipment in different cabinet widths
Spec-00153 Free-Stand Cabinets PROLINE Cabinet Cable Managers PROLINE CABLETEK Vertical Cable Manager For routing and bundling cable inside - and -mm wide PROLINE cabinets. Variety of sizes provide mounting
More informationType 4 Panel Enclosures
Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing
More informationMulti-Pak Group Control
Multi-Pak Grouping.1 Product....................................... Application.................................... Features Enclosures........................................... V-T-2 V-T-2 V-T-2 Feeder
More informationContinuous Hinge Clamped Cover Enclosures JN4XHSS Series Stainless Steel Enclosures
JIC Continuous Hinge Clamped Cover Enclosures JN4XHSS Series Enclosures Standard Features panel sold separately) Cover is attached with a continuous stainless steel piano hinge. Design Options Type 304
More informationThe TeleControl Series Technical Drawings
The TeleControl Series Technical Drawings TeleControl TeleControl Enclosures Dimensions SIZE ID NUMBER OVERALL H X W X D INSIDE A X B X C E X F J K L M N HOLE DIA. SHIPPING WEIGHT PANEL NUMBER J1407TC
More informationMEDIUM VOLTAGE AIR INSULATED ARC-RESISTANT LOAD BREAK AND DISCONNECT SWITCHES
MEDIUM VOLTAGE AIR INSULATED ARC-RESISTANT LOAD BREAK AND DISCONNECT SWITCHES Description JRS arc-resistant fused/non-fused load break and fused/non-fused disconnect switches are available for applications
More informationZaros Aluminium radiators
4 Zaros VERTICAL (ZAROS V5, ZAROS V100) ZAROS V5 ZAROS V100 return supply ref. nr. 1181000000099 price 14 Fittings, see p. 19 TYPES Vertical: Zaros V5 and Zaros V100 (depth) COLOURS Standard colour S00
More informationSection COMMUNICATION EQUIPMENT ROOM FITTINGS. Section Communications Cabinets, Racks, Frames and Enclosures
PART 1 GENERAL 1.1 WORK INCLUDED Section 27 11 00 COMMUNICATION EQUIPMENT ROOM FITTINGS Section 27 11 16 Communications Cabinets, Racks, Frames and Enclosures A. Provide all labor, materials, and equipment
More informationAE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets
FMD ENCLOSURES AE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets Superior in design, Rittal's AE flange mounted disconnect enclosures have fewer moving parts, which reduces assembly and installation
More informationC OMMERCIAL SOLUTIONS
OMMERIL SOLUTIONS asic luminum Outdoor s... OM 1-2 Small Type I allmount s... OM 3 Large Type I allmount s... OM 4 Small inge over oxes... OM 5 Large inge over oxes... OM 6 Lay-In Type I ireway... OM 7-8
More informationTwo Seas Metalworks Shell Lane fax Rev
This catalog provides product information and pricing for our complete line of Battery Enclosures and Battery Racks designed specifically for the PV industry to hold different sized batteries from all
More informationUses, Certifications, and Standards Electrical Control and Instruments, Indoor/Outdoor EXTERNAL FEET, WALL standard UL 508, CSA C22.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 121264CHC Encl 12X12X6 N4 Enclosure Cooper B-Line/Cable Tray Catalog Number Manufacturer escription Weight per unit Product
More informationStandard Product. Polyester powder paint; RAL 7035 textured light gray standard Custom colors available
Spec-01193 PROLINE G2 External Components Tops Solid Top 16 gauge (1.5 ) steel Additional support provisions need to be made to support top mount air conditioners or other top mount accessories Includes
More informationStandard Product. Type 4 Free-Stand Enclosures and Accessories
763.422.2600 Spec-00294 F763.422.2211 Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand Enclosures Type 4 Free-Stand Enclosures and Accessories Free-Stand, Type 4 INDUSTRY STANDARDS
More informationany server any environment one source
any server any environment one source For more information, please contact WDM, Inc. Phone: (800) 448-1881 or (650) 363-2791 Fax: (650) 363-2825 www.wdminc.com or e-mail to info@wdminc.com legendary reliability
More informationIndustrial enclosures INDUSTRIAL INNOVATIVE INDIVIDUAL INSPIRING. Product Catalog.
Industrial enclosures INUSTRIAL INNOVATIVE INIVIUAL INSPIRING Product Catalog www.conteg.cz Content integ Industrial s and their Uses 3 integ Free-standing s Advantages and Specifications 4 Free-standing
More informationPowder Booths. Non-Recovery Booths Cartridge Style Booths High Production Booths GLOBAL FINISHING SOLUTIONS.
GLOBAL FINISHING SOLUTIONS GLOBAL FINISHING SOLUTIONS Powder Booths Non-Recovery Booths Cartridge Style Booths High Production Booths www.globalfinishing.com 1 Non-Recovery Powder Booths GFS Non-Recovery
More information