Cubicles Frameworks. Enclosures W=400mm. System P. 400 mm deep framework. 600 mm deep framework. Hinged front plate support frame.

Transcription

1 Frameworks DD mm deep framework DD DD DD Framework width W = 300 mm W = 400 mm W = 650 mm W = 800 mm W = 800 mm ( ) b composition of catalogue numbers: v two frames (with two additional uprights for W = mm cubicles for the mounting plates and to separate the busbar compartment) v four cross-pieces v mounting hardware v side-by-side combination kit b for the 800 mm width, the busbar compartment can be on the left or right b cubicles can be combined side-by-side and back-to-back b can be equipped with IP30 or IP55 cover panels. DD mm deep framework DD DD DD Hinged front plate support frame DD DD31324 Framework width W = 300 mm W = 400 mm W = 650 mm W = 800 mm W = 800 mm ( ) b composition of catalogue numbers: v two frames (three for W = mm cubicles), equipped with intermediate uprights for the mounting plates v four cross-pieces v mounting hardware v side-by-side combination kit b for the 800 mm width, the busbar compartment can be on the left or right b cubicles can be combined side-by-side and back-to-back b can be equipped with IP30 or IP55 cover panels. Hinged front plate support frame, W = 400mm Hinged front plate support frame, W = 650mm b secured at two points using M6 screws b can be mounted on 650 mm and 800 mm ( ) wide cubicles E23100.fm/2 28 November 2006

2 Frameworks DD Framework combinations Side-by-side The 650 and 800 mm wide frameworks are supplied with a combination kit comprising six M6 bolts. To maintain the IP55 degree of protection, an optional gasket must be installed between the combined cubicles. IP55 sealing kit for side-by-side combinations (1 kit per combination) DD DD Back-to-back Double depth combination kit The kit is made up of: b a set of hardware for the mechanical connections between the cross-pieces b two assembly plates to connect the uprights b the IP55 sealing kit. DD DD Accessories Set of 20 screws + wing nuts for framework November E23100.fm/3

3 IP30/31 cover panels DD Front panels DD Door, W = 650/800 mm. Plain door W = 650 mm W = 800 mm Transparent door W = 650 mm W = 800 mm page 100E23000_Ver1.1.fm/2. Note : The 800 mm door is supplied with a 150 mm barrier for the side compartment, plus a finishing accessory to improve the appearance of the upright DD DD Cover frame Cover frame W = 400 mm W = 650 mm W = 800 mm ( ) b secured using four screws. Note : For 800 mm wide frameworks, the 650 mm frame is supplied with a plain wicket door, 150 mm wide DD DD Door, W = 300/400 mm. Plain door W = 300 mm W = 400 mm Transparent door W = 400 mm Door with cut-out W = 300 mm W = 400 mm page 100E23000_Ver1.1.fm/2. Note : The door with cut-out can be equipped with front plates for 72 x 72 or 96 x 96 instruments, see page 100E21060.fm/ E23100.fm/4 28 November 2006

4 IP30/31 cover panels DD Rear panels Rear panel Rear panel W = 300 mm W = 400 mm W = 650 mm W = 800 mm b made up of two half panels with vents b supplied with quarter-turn fasteners. DD Plain door Plain door W = 300 mm W = 400 mm W = 650 mm W = 800 mm page 100E23000_Ver1.1.fm/2. Note : The 800 mm door is supplied with a 150 mm barrier for the side compartment, plus a finishing accessory to improve the appearance of the upright DD Side panels Side panels Set of two side panels D = 400 mm D = 600 mm Supplied with quarter-turn fasteners. Side panels for "L" combinations Combination of two cubicles with different depths ( or ). Set of two side panels for "L" combinations D = 400 mm These panels simply replace the standard side panels DD DD DD Roof Plain IP30 roof, D = 400 mm W = 300 mm W = 400 mm W = 650 mm W = 800 mm Plain IP30 roof, D = 600 mm W = 300 mm W = 400 mm W = 650 mm W = 800 mm b supplied with quarter-turn fasteners for mounting on the framework b with markings for cut-outs, if necessary IP31 sealing kit The kit is made up of a self-adhesive gasket that attaches to the roof and a deflector. It ensures the IP31 degree of protection for a 650 or 800 mm wide cubicle, or for two cubicles ( ) when they are equipped with plain or transparent front doors. IP31 sealing kit November E23100.fm/5

5 IP55 cover panels DD Front panels DD Door, W = 650/800 mm Plain door W = 650 mm W = 800 mm Transparent door W = 650 mm W = 800 mm page 100E23000_Ver1.1.fm/2. Note : The 800 mm door is supplied with a 150 mm barrier for the side compartment, plus a finishing accessory to improve the appearance of the upright DD Door, W = 300/400 mm Plain door W = 300 mm W = 400 mm Transparent door W = 400 mm page 100E23000_Ver1.1.fm/ E23100.fm/6 28 November 2006

6 IP55 cover panels DD Rear panels Rear panel Rear panel W = 300 mm W = 400 mm W = 650 mm W = 800 mm b supplied with mounting hardware b one-piece, reinforced panel designed to ensure the degree of protection DD Plain door Plain door W = 300 mm W = 400 mm W = 650 mm W = 800 mm page 100E23000_Ver1.1.fm/2. Note : The 800 mm door is supplied with a 150 mm barrier for the side compartment, plus a finishing accessory to improve the appearance of the upright. DD Side panels Side panels Set of two side panels D = 400 mm D = 600 mm b supplied with mounting hardware. Side panels for "L" combinations Combination of two cubicles with different depths ( or ). Set of two side panels for "L" combinations D = 400 mm b these panels simply replace the standard side panels. DD DD DD Roof Plain roof, D = 400 mm W = 300 mm W = 400 mm W = 650 mm W = 800 mm Plain roof, D = 600 mm W = 300 mm W = 400 mm W = 650 mm W = 800 mm b supplied with mounting hardware b with markings for clear identification of cable-running zones, if necessary. 28 November E23100.fm/7

7 Plinth Gland plate DD Plinth, H = 100 mm The plinth is made up of two catalogue numbers: b one catalogue number comprising four corner posts + two cross-pieces (front and rear), that can be used in side-by-side combinations or stacked to form a plinth 200 mm high (maximum) b one catalogue number comprising two side plates (400 or 600 mm). Each catalogue number is supplied with the necessary hardware. four corner posts + two cross-pieces (front and rear) W = 300 mm W = 400 mm W = 650 mm W = 800 mm two side plates D = 400 mm D = 600 mm DD DD Side-by-side combination of two cubicles with a plinth. Two stacked plinths. DD The front and rear cross-pieces can be easily removed for a pallet-mover. DD Gland plates Gland plates (IP55) Gland plates, D = 400 W = 300 mm W = 400 mm W = 650 mm W = 800 mm ( ) W = 800 mm Gland plates, D = 600 W = 300 mm W = 400 mm W = 650 mm W = 800 mm ( ) W = 800 mm DD Two-part gland plates (IP30) Two-part gland plates, D = 400 mm W = 300 mm W = 400 mm W = 650 mm W = 800 mm ( ) W = 800 mm Two-part gland plates, D = 600 mm W = 300 mm W = 400 mm W = 650 mm W = 800 mm ( ) W = 800 mm E23100.fm/8 28 November 2006

8 Cellules Right-angle kit DD IP30 right-angle kit Metal duct. Used to create and protect the connection of horizontal busbars between two cubicles installed at right angles. IP30 right-angle kit Free support and joints, see page 400E22100_Ver2.0.fm/2. DD November E23100.fm/9