64 Push-to-Close Latch
|
|
- Abel Paul
- 6 years ago
- Views:
Transcription
1 Push-to-Close Latch Pull-to-open Paddle latch Miniature Plastic slide 11 (.42) Stainless steel, passivated and brushed finish and glass-filled reinforced nylon, black working load: 90 N (20 lbf) 28 (1.10) 0.9 (.036) 43 (1.69) 13 (.53) 1.6 (.065) Thickness Operating temperature range: -18ºC (0ºF) to 100ºC (210ºF) Flammability rating: UL94-V0 Installation Notes tightening torque on mounting screws: 0.9 N m (8 in lbf) 8 (.32) 3.2±.2 (.125±.010) Total grip (.96±.01) R 1.5 (.06) 9 (.36) ±.8 (1.53±.01) (.38±.03) M4 slotted hex head screw/lockwasher assembly (supplied) Part Number See table Part Number
2 64 Push-to-Close Latch Pull-to-open Paddle latch Small 245 Cup Paddle Plastic slide 47 (1.84) 42.5 (1.67) 14 (.56) Stainless steel, passivated and brushed or black powder coated and glass-filled reinforced nylon, natural working load: 1 (.04) thickness range (see table) 56 (2.20) B Style Max. Static Load N (lbf) (30) (25) 3 90 (20) 25 (.97) 13 (.50) Bracket Cover Grip range (see table) Slide (style 1 shown) 4 70 (15) 5 55 (12) Operating temperature range: -18ºC (0ºF) to 100ºC (210ºF) Flammability rating: UL94-V0 36.5±0.2 (1.44±.01) 47.5±0.2 (1.88±.01) R 2 (.09) 16 (.63) Minimum 10.3±0.2 (.41±01) A Stud, M4 Thread Stud Bracket Installation Notes thickness must not exceed T dimension (see table) in area through which slide will operate. It may be necessary to reduce thickness of door in area indicated by grid. Slide styles: Style 3 Style 4 Grip Range Slide Style A Minimum Min. Max. B T (See Notes) 3.7 (.144) Part Number Brushed Finish Thickness Range ( ) ( ) ( ) Style (.05) 2 (.08) (.41) 12.7 (.50) 12.4 (.49) 1.6 (.063) ~ ~ ~ Style (.11) 3.6 (.14) (.125) ~ ~ 6 (.23) 12.3 (.48) 6.7 (.27) (.52) (.73) 19.4 (.77) (.47) 14.2 (.56) 14.2 (.56) 6.4 (.250) 7.1 (.281) 7.1 (.281) ~ ~ ~ Notes For an assembly with black powder coated finish change last digit from 0 to 5 - Example:
3 Push-to-Close Latch Pull-to-open Paddle latch Small Metal slide Cup Paddle Stainless steel passivated and brushed or black powder coated, steel, chrome plated working load: 222 N (50 lbf) 47 (1.84) 42.5 (1.67) 14 (.56) 1 (.04) 56 (2.20) B Grip range (see table) 13 (.50) 25 (.97) Cover Bracket Stud, M4 Thread Slide 47.5±0.2 (1.88±.01) A 36.50±.2 (1.44±.01) R 2 (.09) Stud Bracket Part Number See table Grip Range Part Number A Stainless Steel Black Powder B Minimum Stainless Steel, Brushed Minimum coated 1.2 (.05) 2 (.08) (.41) 12.7 (.50) 11.5 (.45) 2 (.08) 2.8 (.11) (.44) 13.5 (.53) 11.9 (.47) 2.8 (.11) 3.6 (.14) (.47) 14.2 (.56) 12 (.48)
4 64 Push-to-Close Latch Pull-to-open Paddle latch Medium (.25) thickness 36 (1.39) 17.5 (.69) Mounting bracket Adjusting nut Lockwasher Latch Available with or without lock (see part number selection) 84 (3.31) M5 Thread Gap important (See installation notes) 19 (.75) 8 (.31) 1.2 (.05) 7.9 (.31) 68.5 (2.69) Metal slide Stainless steel brushed, steel, zinc plated or steel, black powder coated or silver working load: 570 N (125 lbf) Installation Notes Measure your door thickness and set adjusting nut so that Gap is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00). Flat key, keyed alike H257 Part number: Minimum 8 (.31) 11 (.44) 14.3 (.56) Ref 8. (.31) Minimum 11 (.44) 7.9 (.31) (2.19±.01) R 2.5 (.09) (2.81±.01) Gap important (see installation notes) Slide Adjusting nut Mounting bracket Lockwasher 11.1 (.44) Min Edge of frame or modified latching surface (notch, hole, bracket or shim) Part Number Selection 64-2 L - 1 M 0 Stainless steel, brushed 1 Steel, black powder coated 3 Steel, zinc plated 5 Steel, powder coated silver 1 Non-locking 2 Key-locking keyed alike H257 (2 Flat keys supplied)
5 Push-to-Close Latch Pull-to-open Paddle latch Large Metal slide Stainless steel, brushed, steel, zinc plated or steel, black powder coated working load: 1110 N (250 lbf) Available with or without lock (see part number selection) 28.5 (1.13) (4) Installation Notes Measure your door thickness and set adjusting nut so that GAP is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00) Flat key, keyed alike CH751 Part number: PK (1.94) 25.5 (1.01) door thickness 9.5 (.38) Mounting bracket Adjusting nut Lockwasher 127 (5.0) 4.5 (.17) Gap important (See installation notes) 1/4-20 Thread 11 (.44) 1.6 (.06) 11.9 (.47) Overmolded key, keyed alike CH751 Part number: PK Minimum 11 (.44) 15.9 (.63) 20.6 (.81) Ref 11.9 (.47) (3.25±.01) R 3 (.13) (4.25±.01) Gap important (see installation notes) Slide Adjusting nut Mounting bracket Lockwasher 14.3 (.56) Min Edge of frame or modified latching surface (notch, hole, bracket or shim) Part Number Selection L - M 0 4 Steel, zinc plated 5 Stainless steel brushed 9 Steel, black powder coated 1 Non-locking 2 Key-locking keyed alike CH751 (2 Flat keys supplied)
6 64 Push-to-Close Latch Pull-to-open Paddle latch Large (5.50) 10.2 (.40) Multiple mounting styles Inside actuation in locked or unlocked position 108 (4.25) Available with or without lock (see part number selection) 22.6 (.89) Stainless steel, polished, steel, zinc plated or steel, black powder coated Slide bolt and lock assembly: Zinc plated or powder coated working load: 560 N (125 lbf) 1.2 (.05) 4 x Ø H rivet mounting only Flat key, keyed alike CH751 Part number: PK (.92) 43 (1.7) 118 (4.65) 95.2 (3.75) Tapped hole 1/4-20 for inside release handle (not provided) Overmolded key, keyed alike CH751 Part number: PK (3.81) 86 (3.38) 4 x R5 (.20) 20.9 (.82) 22 (.87) 14 (.55) 4 x Ø H rivet mounting only 15 (.59) L H - M 10 Steel, zinc plated 20 Stainless steel polished 50 Steel, black powder coated Part Number Selection 0 Non-locking 1 Key-locking keyed alike CH751 (2 Flat keys supplied) H Housing 0 Weld 1 Rivet through hole 4.9 (.19) 2 Rivet through hole 5.2 (.20)
7 64 Push-to-Close Latch Pull-to-open Paddle latch Heavy-duty pivot (.20) 110 (4.33) 100 (3.94) 5.3 (.21) 52 (2.05) 170 (6.7) 52 (2.05) 52 (2.05) Available with or without lock (see part number selection) 7 (.28) 83 (3.27) 8 x Ø H rivet mounting latches only 88.4 (3.48) 9 (.35) Robust design resists binding from dirt and debris Multiple mounting styles Steel, zinc plated or black powder coated Slide bolt and lock assembly: Zinc plated or powder coated working load: 2700 N (607 lbf) Flat key, keyed alike Part number: PK (5.81) 89 (3.50) 4 x R5 thickness 17.2 (.68) 37.9 (1.49) Part Number Selection L H - M 10 Steel, zinc plated 50 Steel, black powder coated 0 Non-locking 1 Key-locking keyed alike (2 Flat keys supplied) H Housing 0 Weld 1 Rivet through hole 4.9 (.19) 2 Rivet through hole 5.2 (.20)
8 271A 64 Push-to-Close Actuator Pull-to-open Paddle handle actuator Multi-point Large Flush mounting installation Multiple mounting styles Locking and Non-Locking options (5.50) 29 (1.14) Latched 25 (1.0) Unlatched Stainless steel, polished, steel, zinc plated or black powder coated Flat key, keyed alike CH751 Part number: PK (4.25) Available with or without lock (see part number selection) 4 x Ø H rivet mounting only 47 (1.85) Unlatched 70 (2.75) Latched 1.2 (.05) 23 (.91) 40.9 (1.61) Overmolded key, keyed alike CH751 Part number: PK Ø 2.3 (.09) Ø 6.3 (.25) 3 (.13) 12 (.45) 118 (4.65) 95.2 (3.75) Notes AC Cable end fitting must be eyelet for this actuator (Page 272) (2 PL) For use with AC Cables, must use eyelet fitting. Use cotter pin to secure end fitting (3.81) 86 (3.38) 4 x R 5 (.20) H 4 x Ø Rivet mounting only Part Number Selection H Housing 0 Weld 1 Rivet through hole 4.9 (.19) 2 Rivet through hole 5.2 (.20) L H - M 10 Steel, zinc plated 20 Stainless steel, polished 50 Steel, black powder coated 0 Non-locking 1 Key-locking keyed alike CH751 (2 Flat keys supplied)
AC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
More informationH3 Swinghandle System
192 H3 Swinghandle System Medium / large Sealed / non-sealed Zinc alloy swinghandle system Multiple locking options; including DIN profile Indoor/outdoor version Available for medium (125mm x 25mm and
More informationLift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
More informationDoor thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
More informationAC Single Point Actuator
130 AC Single Point Actuator T-handle Surface mount installation Generous grip area Pull to activate Cable clip 20.8 (.82) 21.7 (.85) 23 (.91) Housing: PC/ABS, black T-handle and slide: 33% glass-filled
More informationModularity and simplicity in action. ÂÂ Cost effective, easy to design and install
84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationMultiple key codes Tool actuation Change key codes in future Configure to order. Page 164 Page 164
162 CM Cam Locks Selection Removable core options provide maximum flexibility Fixed core options provide simple, economic solutions Sealed housings are available Multiple finishes A broad selection of
More informationModularity and simplicity in action. A variety of materials and finishes to complement your application. Die-cast zinc latch bodies standard finishes:
116 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More information19 Swell Action Latch
150 19 Swell Action Latch Plastic ylon and glass-filled nylon black with rubber bushing Ø 2.4 (.09) Acorn nut M6 Thread 39 (1.53) Handle / tee shaft sub-assembly 1.5 (.059) 400 (90lbf) 2.5 (.098) 690 (155lbf)
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More informationSwing Handles & Latches
ov-swing-handles-&-paddle-latches-divider - Updated - 12-01-2017 w Swing Handles - Cam Control Swing Handles - Rod Control Flush T-handle Latches Paddle Latches Swing Handles & Latches 30 Swing Handles
More information2600/2700 Series. Determining the stud length number when using receptacle: Type 1 + 3* G = P + F. * For Type 3: G = 9,9 mm min.
Particular Features Max. tensile strength 1.330 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle designs. 2600 Series: Fillister head; 2700 Series:
More informationRotary Medium Stylized wing 1.6 (.06) 1.3 (.05) 19 (.73) 48 (1.89) 1.6 (.06) 1.3 (.05) 18 (.71) 47 (1.85)
K Draw Latch Rotary Medium Stylized wing 1.6 (.06) 6.4 (.5) 9 (1.13) Stainless steel or steel, black powder coated Performance Details Steel: Max. working load: 130 N (75 lbf) Stainless steel: Max. working
More informationQuarter-turn locks, compression latches
Quarter-turn locks, compression latches 435 K0518 Quarter-turn locks small version 2,5 13,5 4,5 SW 20 Ø20 max. 5 Ø16,2 14,2 Housing and actuator die-cast zinc. Housing and actuator chrome-plated. Wing-handle
More informationAero Materiel. Locks and latches
Aero Materiel Locks and latches E3 Material and finish Zinc alloy, powder coated or chrome plated and steel plated Max static load 300N NEMA4/IP65 sealing is achieved by using optional flange gasket Recommended
More information4050A. Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies
4050A Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies Parts Identification READ these instructions before placing unit in service KEEP these and other materials
More informationstyle vision & paddle latches paddle latches section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
paddle latches vision & style paddle latches INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 1 paddle latches No. 4000 No. 4000 Mini
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More informationPT SS/MI - Pass Thru
PT 2424-24 SS/MI - Pass Thru TABLE OF CONTENTS 1) 2) 3) 4) Pass Thru Brochure Pass Thru Drawing Operation Instructions Parts List Latch Info Hinge Info Spring Info Halco Warranty Pgs. 2-3 Pg. 4 Pgs. 6-8
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationCabinet & Drawer Hardware
www.crh.com.au SOLUTIONS FOR TRADE Cabinet & Drawer Hardware November 2017 www.crh.com.au SOLUTIONS FOR TRADE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19
More informationD8 DZUS PANEX Quarter-Turn Fasteners
392 DZUS ANEX Quarter-Turn Fasteners Studs Size 4 Studs: Steel, zinc plated plus chromate or chrome plated Bail cover: ABS, black H Head Styles - Tool Actuated Oval Slot Hex Recess hillips Recess 1.3 (.051)
More information250P Manure Spreader
0P Manure Spreader Illustrated Parts Breakdown Page - Page Page Page Page Page Page Page Page Page Page Page Page Page Page - Page Page Page 0 Complete Front End PTO/Jack/Hitch Assembly Front Pulley Assembly
More informationParts and Instruction Manual Frontrunner Series Floor Machines Low Speed & Dual Speed
Parts and Instruction Manual Frontrunner Series Floor Machines Low Speed & Dual Speed Technical Specifications Model Nos. FM17-115 / FM20-115 / FM17-220 / FM20-220 / FM17-220-60 / FM20-220-60, FM202S-115
More informationHinges Gasketing Handles Stainless Steel Toggle Latches Compression Latches Quarter Turns Rod Controls Locking Systems
Rod Controls Locking Systems Hinges Gasketing Handles Stainless Steel Toggle Latches Compression Latches Quarter Turns Locking Systems Hinges Gasketing Handles Stainless Steel Toggle Latches Compression
More informationPARTS CATALOG ODYSSEY INCLUDES MOWER
PARTS CATALOG 8-3350 ODYSSEY INCLUDES MOWER INDEX PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (P.I.N.) OR SERIAL NUMBERS (S/N) ENGINE MODEL, SERIAL AND SPECIFICATION NUMBERS TRACTOR MODEL
More information5F Series. Miniature Stud Assemblies and Receptacles
5F Series. Miniature Stud ssemblies and Receptacles Features: Minimum stud head projection. Wide range of head styles. Variety of materials. Stud available with either retaining ring or snap-in grommet
More informationTHIS PAGE LEFT BLANK INTENTIONALLY
THIS PAGE LEFT LANK INTENTIONALLY ARREL EXCHANGE SYSTEM The housings shown on this page all share a common part: an innovative removable barrel. In seconds, and without the need for any special tools,
More informationCONNECTORS & RECEPTACLES
60 HEX NUT Used in mounting rear or front of panel receptacles LOCK WASHER Prevents rear or front of panel receptacle from working loose when installed TYPICAL SL172F REAR MOUNT RECEPTACLE THREADED BUSHING
More informationMODEL DESCRIPTION IN LBS.
QUIC-RELEASE Oxygen Tank System Model QR-OTS- -U Parts and Mounting Information ZICO 00PM0 Rev. --7 Model QR-OTS-U allows you to mount any "M" through "J" cylinder. The system uses a QR-MV Multiversal
More informationType 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
More informationType 4 Panel Enclosures
Wall-Mount Enclosures Type 4 Premier Series with Quarter-Turn Latches Data Sheet and Catalog Number Accessories Premier panels NEMA panel adapters Depth adjustment brackets Print pockets Padlockable or
More informationSAF-T-LINER MVP-ER PARTS MANUAL. Doors Section. Page 4-1. Doors 10/96
Doors Section Doors Page 4-1 Stepwell - Outward Opening Page 4-2 Doors Stepwell - Outward Opening Item Part Num. Number Qty. Description Notes 1 47001449 1 Trim - Step, Entrance, Diamond Plate 2 47001450
More informationKinze 3000 Series Row Unit. Hydraulic Actuator Installation Instructions PN: ENG REV. A
Kinze 3000 Series Row Unit Hydraulic Actuator PN: 2006428-ENG REV. A Installation Overview Required Parts Part Number Qty * Description 4003011 1 HYDRAULIC ACTUATOR ASSY. (INCLUDES MOUNTING HARDWARE) 4003458
More informationQUICK OPERATING 1/4-TURN FASTENERS
50F Series. General Purpose Stud Assemblies and Receptacles Features: Designed for use in agricultural, industrial, and similar environments where a simplified rugged design is desired. Studs are retained
More informationMAIN FRAME 84-G PART # DESCRIPTION QTY /4-20 X 1 SHCS /4-20 X 1 1/4 SHCS /16-18 X 3/4
MAIN FRAME 84-G30-3699-02 PART # DESCRIPTION QTY 99-280-7006-05 1/4-20 X 1 SHCS 2 99-280-7006-06 1/4-20 X 1 1/4 SHCS 2 99-280-7007-04 5/16-18 X 3/4 FHS. 1 99-280-7012-01 NUT, NYLOC 10-24, CAD PLATE 1 99-280-7015-01
More informationTriMark. Service & Replacement Parts
TriMark Service & Replacement Parts TriMark Service and Replacement Parts provides the standard vehicular hardware products and keys to OEM s in the construction, agriculture, truck (on and off-road),
More informationCut out PRODUCT CODE HANDLE BODY FINISH MATERIAL MODUL. 5 mm Double bit 8 mm Square 9 mm Triangular Button. Stainless steel dust cap (Keyed alike) 03
ROD-LATCH SYSTEM LINEAR HANDLE LOCK 204 V : 1 With mechanism Cut out Ergonomic and modern design Locking and unlocking by linear movement Suitable for inside & outside gasketing applications Swing handle
More informationHiBoy Maverick/Commander Doors Part # HiBoy4 Maverick/Commander Doors Black
Racing 3191 N Washington St. Suite 2 Chandler, AZ 85225 1 (800) 708-9803 http://www.racing.com HiBoy Maverick/Commander Doors Part # 07-2001 HiBoy4 Maverick/Commander Doors Black Congratulations on your
More informationInspection upon receipt of the lift ASSEMBLY. XLT Side Extension Kit Installation (THIS KIT IS OPTIONAL) Operating Conditions
Inspection upon receipt of the lift 1. When you receive the lift look for freight damage and make note of any damage on the bill of lading. 2. In case of freight damage, call the truck line immediately
More informationPage: REV 3: Add drill and tap information to Figure 4 DRILL #3, TAP 1/4-28 BOTH ENDS.
REVISION DESCRIPTION: 1) Page: 32-03 MEMO: Step 4 should not be bold. Fix WD-1213 callout in Figure 3. Page: 32-04 REV 3: Add drill and tap information to Figure 4 DRILL #3, TAP 1/4-28 BOTH ENDS. Add make
More informationADJUSTABLE FOOT INSERTS FOR ROUND TUBING
ADJUSTABLE FOOT INSERTS FOR ROUND TUBING J D E F A B C G H I K INSERTS FOR 1-5/8 IN. (40MM) O. D. 16 GA. ROUND TUBING HEX FOOT Thermoplastic, or die-cast Zamak insert body with die cast or stainless steel
More information99125B - Series N Brush Lift Assembly Model :99125B 20" EZ Floorkeeper (w/ 4-6 V Batteries) - Series N
995B - Series N Brush Lift Assembly Model :995B 0" EZ Floorkeeper (w/ - V Batteries) - Series N Page- 5 7 9 0 5 7 9 5 7 9 0 5 7 9 0 070 RETAINING RING PIN 9 WASHER 907 WELDMENT BRUSH LIFT PEDAL 900 PEDAL
More informationCut Out Templates - Drop T & Compression Locks T1, T2, T3, V1, W1 C L LOCKS
111 112 Cut Out Templates - Drop T & Compression Locks T1, T2, T3, V1, W1 C L C L C L C L C L C L C L C L C L 113 C L PRODUCT NUMBER T1 T2 T3 V1 W1 EWTC140, EWTP140 WTC140, WTP140 UES052047 X UES052048
More informationLOCKS ORB1. Orbit Lock. Whale Tail Compression Lock WTC140, WTP COMPRESSED 68 RELEASED. MATERIAL Stainless Steel 304, Die-Cast Zinc Alloy
118 117 Orbit Lock ORB1 140 70 14 Stainless 304, Die-Cast Zinc Alloy Polished Chrome WEIGHT 1.4kg 156 132 84 62 M6 mounting screws supplied Suitable for tough conditions Fits standard T-lock cutout ACCESSORIES
More informationTable of Contents. Page. Latches. Handles. Page
Table of Contents Latches Page Slam Action (hook, pivoting & rotating catch) 030-0500 Pivoting Catch Compartment Latch... 36 030-0550 Heavy Duty Pivoting Catch Compartment Latch... 37 030-0600 Rotating
More informationMfg. No: P216020KWV, 21" 6 TP Steel Deck Series
Parts Manual Mfg. No: 7800557 P216020KWV, 21" 6 TP Steel Deck Series Copyright Briggs and Stratton. All Rights reserved 28-Sep-2018 Model Components Table Of Contents Page Accessory Recycling Kits..............................................................................
More informationHORSE III 8HP ROTO TILLER (S/N ) Page 1 of 25 Bolo Tine Assemblies
HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 1 of 25 Bolo Tine Assemblies HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 2 of 25 Bolo Tine Assemblies 1 GW-2415 2 S/F TINE HOLDER- welded steel.
More informationCommercial Body Fittings 8th Edition. Underbody Access Step Galvanized 2-Rung, Heavy Duty. Frame: L595 x W350mm
STEPS Commercial Body Fittings 8th Edition No. ABUS871/BRGV wgt. 6.00kg No. ABUS876/BRGV wgt. 11.20kg Underbody Access Step with Platform 2-Rung, Heavy Duty Step: L600 x W285mm Frame: L815 x W340mm l Platform
More informationHIGH PERFORMANCE BUTTERFLY VALVE
Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications
More informationINSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS
June 2004 INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS Please be sure that this document is given to the end user of this product. It contains many important items relating to the proper usage of
More information21" STEEL DECK EASY LINE EUROPEAN WALK MOWER
Parts Manual for 21" STEEL DECK EASY LINE EUROPEAN WALK MOWER MODEL ESPV21 ESPV211 McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2007 Briggs & Startton Corporation Milwaukee,
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More informationWashroom Accessories Service Parts List Price Book 0514WSP
Washroom Accessories Service Parts List Price Book 0514WSP Table of Contents Hair-Hand Dryers (Models 2870 thru 2874, 2889, 2896, & 2897) 2 Hand Dryers (Models 2875-28 & 2885-28, 2877-28 & 2887-28) 3 Aerix
More informationTable of Contents. Latches. Page. Two-Rotor. Single-Rotor 050- Sliding Bolt. Dead Bolt Two-Rotor Latch... 11
Table of Contents Latches Page Two-Rotor 050-0100 Two-Rotor Latch... 11 050-0103 Two Rotor Latch 2-Position Intertrip... 12 050-0107 Two-Rotor Latch With Coaxial Trip... 12 050-0110 Two-Rotor Single-Position
More informationNorthstar RIM Tach Steps to Installation. J Wheel (Spoke Style Wheel)
Northstar RIM Tach 8500 10 Steps to Installation J Wheel (Spoke Style Wheel) Mill Duty High Performance & Rugged Most Reliable magneto-resistive digital tach on the market today Ductile Iron Housing &
More informationphone
AS-035508 Pinion Housing AS-035511 AS-035512 AS-040502 AS-040504 Locknut sliding block fountain AS-053111 Cam Follower AS-082220 Lockwasher AS-085015 AS-087459 Idler Gear AS-1001705 Nylon Tip Set Screw
More informationTF2 Series Miniature Snap-acting Switches
Miniature Snapacting Switches Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics
More informationRoHS ON - OFF. ON - OFF (momentary ON) ON - OFF. (momentary OFF) ON - ON ON - ON. (momentary 1 side) ON - OFF - ON µ. (momentary 1 side)
900 Metal Lever Switches 6A 50Vac Metal lever switches Ratings up to 0A, 77V ac Single and double pole hoice of circuits including position and momentary 6.mm and solder terminals Guard option 6(4)A 50Vac
More informationType 4 Panel Enclosures
Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing
More informationIllustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to
Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 36H13 36-inch Variable Rate Spreader Package Push Model w/13-inch
More informationSlam-Cam Page. Material: a) Slam-Cam: zinc die, chrome plated Spring: steel, zinc plated Washer: Teflon
Slam-Cam Page 1-264 Slam-Cam for Slam Doors. Locking without key or tool. To a): The Teflon washer replaces the wave washer underneath the insert. Used with all Quarter- Turns and inserts according to
More informationKASON EQUIPMENT LEGS AND ACCESSORIES SERTS FOR. RoHS COMPLIANT ALPHABETICAL INDEX CONTACT
KASON EQUIPMENT LEGS AND ACCESSORIES ALPHABETICAL INDEX BLE FOOT SERTS FOR D TUBING A Appliance Legs 1-inch...B-18 Heavy Duty... B-21 Standard... B-19 Suction Cup... B-20 C Cross Brace Fittings... B-24
More informationSECTION CONTENTS MODEL NO. U U PAGE NO. U THRU 27-9 U THRU 27-9
SECTION CONTENTS PAGE NO. 27-2 THRU 27-9 27-2 THRU 27-9 * PRICING, SPECIFICATION S, AND PRODUCT AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE. PRICING IS FOB FACTORY, CANTON, OH * ALL INFORMATION CONTAINED
More informationTOWING ACCESSORIES. New to CURT towing accessories! 168 TOWING ACCESSORIES CURTMFG.COM CURTMFG TOWING ACCESSORIES
ACCESSORIES ACCESSORIES Scan for live digital version Towing accessories are a great way to increase your sales by encouraging the consumer to buy products along with his or her hitch purchase. Our full
More informationPARTS LIST ALPHA WET / DRY VACUUM (ALS)
PARTS LIST ALPHA WET / DRY VACUUM (ALS) ALPHA 30 ALPHA 100 ALPHA 100 FMS ALPHA 30 MOTOR ASSEMBLY 1 5797781 LIFT HANDLE 1 2 5792611 SCREW SELF TAP 5X25 2 3 5791441 SCREW SELF TAP 5 X 20 2 4 5797791 TOP
More informationINSTRUCTIONS DYNA FLOORBOARD KIT 1WARNING -J01921 REV General. Kit contents. Installation SHIFTER ASSEMBLY (LEFT SIDE) Kit Number
General INSTRUCTIONS REV. 10-1-200 Kit Number 50601-01 DYNA FLOORBOARD KIT Kit contents This forward foot controls kit is designed for use on all 1996 and later FXD models and includes all parts required
More informationPIÈCES DÉTACHÉES SNM6X (ESPV21) Tondeuse à conducteur marchant
PIÈCES DÉTACHÉES Tondeuse à conducteur marchant SNM6X (ESPV21) Yvan Béal - 21, av. de l Agriculture - B.P. 16 Z.I. du Brézet - 63014 Clermont-Ferrand Cedex 2 Tél : 04 73 91 93 51 - Télécopie : 04 73 90
More informationThe EPA07 Series 60 Workshop Manual has been revised. Listed in Table 1 are the revisions.
NUMBER: 08 60-6 S.M. REF.: 2.3.1 and 2.3.2 ENGINE: EPA07 Series 60 DATE: September 2008 SUBJECT: E3 INJECTOR TUBE PUBLICATION: DDC-SVC-MAN-0005 The EPA07 Series 60 Workshop Manual has been revised. Listed
More informationSwitches. Common Used Terminology:
Switches Product Description Page# Ball Switches 158 Breakaway Switch 158 Master Disconnect Switch Battery Master Disconnect Switch & Face Plate 159 Plunger Switch Sealed 158 Push/Pull Switches Medium-Duty,
More informationAccessories 286 SDC SECURITY DOOR CONTROLS
8 Security Door Controls From wireless remote controls to durable door holding & release devices, to REX sensors, timers, ball and magnetic switches, and from concealed contact to universal mounting enclosure
More informationFOOT SWITCHES
- 83 - FOOT SWITCHES PS... / PD... Foot Switches Double insulation - Plastic Casing IP65 Description Applications Foot switch operated machines such as: shearing machines, spinning machines, spinning lathers,
More informationNew Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS
New Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS 1 Modifications & Custom Components Diverse manufacturing capabilities and experienced on-site technical personnel allow Dumeta to offer a wide
More informationSECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
SECTION 10 51 13 METAL LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Heavy Duty Welded Gear Lockers. B. Locker benches. 1.02 REFERENCES A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
More informationSECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.
Section 10_51_13_MetalLockerPenco-ProTough_8-19-09 PART 1 GENERAL SECTION 10 51 13 METAL LOCKERS 1.01 SECTION INCLUDES A. Heavy Duty Welded Tubular Frame Lockers. B. Locker benches. 1.02 REFERENCES A.
More informationPUSH-PULL CLAMPS. Installation: When mounting clamps ensure that the mechanism clears the mounting bracket or fixture.
Features: With the exception of model P50, which is a light duty base mounted clamp, these push-pull clamps are mounted either directly into a threaded or plain hole in a fixture, or can be mounted in
More informationHinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
More informationHandle Stainless Steel. wgt. 0.24kg. Handle Plated Diecast Steel. wgt. 0.19kg. Handle Plated Diecast Steel. wgt. 0.08kg. Handle Plated Diecast Brass
HANDLES GRAB/PULL No. HAPL2550/265SS wgt. 0.24kg 265mm hole centres 2 x 10mm dia. fixing holes Plated Diecast Steel No. HAPL2923/150 wgt. 0.19kg 150mm hole centres 2 x 6mm dia. fixing holes Plated Diecast
More informationReproduction. Not for JOHN DEERE WORLDWIDE COMMERCIAL & CONSUMER EQUIPMENT DIVISION. Dual Stage Snowthrower 928E IPL
JOHN DEERE WORLDWIDE COMMERCIAL & CONSUMER EQUIPMENT DIVISION Dual Stage Snowthrower 928E PARTS IPL1735371 MANUAL North American Edition Litho in USA Table Of Contents PRODUCT COMPONENTS PAGES Engine
More informationInstallation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822 Statements: NIBCO High Performance Butterfly Valves, Series 6822 and 7822, have been designed
More information521613x89A Garden Tractor (2001) Page 1 of 24 Blade Drive
521613x89A Garden Tractor (2001) Page 1 of 24 Blade Drive 521613x89A Garden Tractor (2001) Page 2 of 24 Blade Drive Ref # Part Number Qty Description 1 094607E701 Cover, Right Pulley 2 26X250 Screw 3 015X84
More informationModel 10 Actuator with Leveler Channel. Model 10 Actuator with Leveler Channel and Mounting Channel For 3 Width Tongue
Basic capacity 0,000 lbs. G.V.W.R., 800 lbs. tongue load The Model 0 is demountable when installed with mounting channel for width tongue or may be welded for permanent installation. This actuator is available
More informationSection 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
More informationSpicer Axles & Brakes
Information Bulletin Bulletin Type: Parts / Service Information Spicer Axles & Brakes Topic: Dana Corporation Steer Knuckle Recall Identification and Repair Procedure Affected Models: Steer Axle Knuckle
More informationDouble action door rails
The solution for heavy doors. Convincing in quality and design. CONTENTS Technical details 26-29 Materials and surface finishes 290 Product information 105 mm door rails: 55/65 mm pivot point 291-292 22/24
More informationBODY. 28 Hood Components Blazer Jimmy Hood Components Blazer Jimmy Hood Brace Kit... Gets the Kinks Out
Hood Components Blazer -0 Jimmy -0 See Page BODY Hood Components Blazer - Jimmy - v 0 0 This easy-to-use Hood Hinge Spring Tool provides a safe and economical way to replace your wornout hood hinge springs.
More informationBX7460P Allure Tow Bar Operator Manual & Installation Instructions. ALLURE Tow Bar (10,000 lb) Pintle Coupler
Operator Manual & Installation Instructions ALLURE Tow Bar (10,000 lb) Pintle Coupler Hooking Up to Towed Vehicle 1. Position the towing vehicle on a level surface with a straight driveway ahead and engage
More informationINSTALLATION INSTRUCTIONS RATTLER STEEL RUNNING BOARDS DODGE RAM 1500 REGULAR CAB REGULAR CAB
INSTALLATION INSTRUCTIONS PARTS LIST: 2 Steel Running Boards 3 12mm Hex Nuts 1 Driver/Left Mounting Bracket 4 10-1.5mm x 35mm Hex Bolts 1 Driver/Left Support Bracket 4 10mm x 27mm OD x 3mm Flat Washers
More informationREPLACEMENT PARTS WEIGHT DISTRIBUTION SYSTEM SWAY CONTROL FIFTH WHEEL HITCHES REPLACEMENT PARTS
WEIGHT DISTRIBUTION SYSTEM Reese SC Weight Distributing Heavy Duty Trunnion Bar Weight Distributing Heavy Duty Round Bar Weight Distributing Steadi-Flex Light Duty Weight Distributing Heavy Duty Trunnion
More informationLCS6822 (Class 150) LCS7822 (Class 300)
Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications
More informationACCESS SOLUTIONS NEW PRODUCTS BROCHURE.
ACCESS SOLUTIONS NEW PRODUCTS BROCHURE www.essentraaccesssolutions.com ESSENTIAL SOLUTIONS DELIVERED NEW PRODUCTS Locks Hinges Gaskets Handles Stainless Steel Products Electronic p3-6 p13 14 p17-18 p7-8
More informationAPG. LF - Miniature Liquid Level Sensors
LF - Miniature Liquid Level Sensors The LF Miniature Liquid Level sensors are designed for reliable operation in small tanks and containers. Their rugged design and multiple configurations make them the
More informationDAYTONA 700 (97DTA-1997) Page 1 of 60 BILGE PUMP ASSEMBLY
1997 DAYTONA 700 (97DTA-1997) Page 1 of 60 BILGE PUMP ASSEMBLY 1997 DAYTONA 700 (97DTA-1997) Page 2 of 60 BILGE PUMP ASSEMBLY Ref # Part Number Qty S/P/F Description 1 0673-377 1 Fitting, Outlet - Bilge
More informationSL-6 & SL-6A. I UNION SWITCH & SIGNAL l[ml 645 Russell Street Batesburg, SC Service Manual Field and Shop Maintenance
I UNION SWITCH & SIGNAL l[ml 645 Russell Street Batesburg, SC 29006 Service Manual 3011 SL-6 & SL-6A Outlying Switch Lock Field and Shop Maintenance April, 1979 A-79-500-1496-3 1979, Union Switch & Signal
More informationCamloc Quick-Operating
Camloc Quick-Operating Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 Overview Quick-Operating Fasteners...
More informationROLL UP DOOR TRADITIONAL HANDLE BAR INSTALLATION INSTRUCTIONS
ROLL UP DOOR TRADITIONAL HANDLE BAR INSTALLATION INSTRUCTIONS ***** READ ALL INSTRUCTIONS BEFORE ***** ATTEMPTING INSTALLATION OF YOUR ROLL UP DOOR PRODUCT DOC NO: INST00001 REV: 11 CHG:STB APR: PJC ECN:
More informationAll engine installations with this front end will require a rear sump oil pan.
1960-1965 Falcon, 1962-1965 Comet & 1962-1965 Ranchero Coil Spring IFS Tech line: 1-855-693-1259 www.totalcostinvolved.com Read and understand these instructions before starting any work! USE THE PARTS
More informationDICTATOR RTS Tube Door Closer
DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is virtually invisible because being built into the door. The joint can only be seen when the door is open. The
More informationPARTS LIST ELECTRIC CHARGER 1500
PARTS LIST ELECTRIC CHARGER 1500 HANDLE ASSEMBLY - 5293999 120 VOLT - 75 FOOT CORD HANDLE ASSEMBLY - 5296609-240 VOLT - 75 FOOT SHUKO CORD ITEM PART NO. PART DESCRIPTION QTY. 101 5092322 BLACK VINYL COVER
More information