Model 10 Actuator with Leveler Channel. Model 10 Actuator with Leveler Channel and Mounting Channel For 3 Width Tongue

Transcription

1 Basic capacity 0,000 lbs. G.V.W.R., 800 lbs. tongue load The Model 0 is demountable when installed with mounting channel for width tongue or may be welded for permanent installation. This actuator is available with ball couplers, lunette eye, and adjustable clevis hitch. Usage suggested for recreational and light industrial trailers towed by passenger cars and light trucks. ZINC PLATED (MARINE) MODELS AVAILABLE FOR GREATER CORROSION RESISTANCE. Model 0 Actuator with Leveler Channel Drum STD Leveler Channel Only Drum STD Clevis Hitch Drum STD CPLR 8900 Drum STD Lunette Eye Model 0 Actuator with Leveler Channel and Mounting Channel For Width Tongue 4800 Drum *NON-STD CPLR Drum *NON-STD With Lunette Eye Drum *NON-STD Leveler Disc *NON-STD Act w/leveler Disc *NON-STD With Lunette Eye *Non-Standard Actuators require minimum 8-week lead time and minimum order Model 0 Actuator with -5/6 Drop Coupler Less Channel 7500 Drum STD CPLR Weld-On 8

2 Model 0 Actuator - Straight -5/6 Ball Coupler Less Channel Drum STD CPLR Weld-On Disc STD CPLR Weld-On Model 0 Actuator - Straight with Lunette Eye Less Channel Drum **NON-STD L-Eye Weld-On * Drum **NON-STD L-Eye Bolt-On *With mounting channel for width tongue. **Non-Standard Actuators require minimum 8-week lead time and minimum order Model 0 Actuator less Coupler and Channel Drum STD Weld-On Model 0 Actuator - Straight less Coupler, with Mounting Channel for Width Tongue Drum *NON-STD Bolt-On *Non-Standard Actuators require minimum 8-week lead time and minimum order 9

3 Model 0 Actuator - Straight with -5/6 Ball Coupler and Mounting Channel for Width Tongue Drum STD CPLR Bolt-On Drum *NON-STD CPLR Bolt-On Disc STD CPLR Bolt-On *Non-Standard Actuators require minimum 8-week lead time and minimum order quantity may be required. Model 0 Actuator - -5/6 Ball Drop Coupler and Mounting Channel for Width Tongue Drum STD CPLR Bolt-On Disc STD CPLR Bolt-On Drum STD CPLR Bolt-On *Use 5 8 Mounting Bolt. NOTE: Padlock (Master Lock #0) works with a 5 6 Ball Coupler. 0

4 MODEL 0 ACTUATOR PARTS LIST

5 (REFER TO DIAGRAM ON PAGE ) MODEL 0 ACTUATOR PARTS LIST REF # DESCRIPTION ATTACHMENT ASSEMBLY INNER SLIDE OUTER CASE BODY ONLY WELD-ON BODY CONLY WELD-ON /6" BALL COUPLER WELD-ON /6" BALL COUPLER /" BOLT-ON /6" BALL COUPLER, ZINC PLATE /" BOLT-ON /6" DROP COUPLER WELD-ON /6" DROP COUPLER 5/8" BOLT-ON /6" DROP COUPLER, ZINC PLATE 5/8" BOLT-ON /6" ADJUSTABLE COUPLER WELD-ON /6" ADJUSTABLE COUPLER 5/8" BOLT-ON " ADJUSTABLE LUNETTE TYE WELD-ON /4" ADJUSTABLE CLEVIS HITCH WELD-ON " ADJUSTABLE LUNETTE EYE 5/8" BOLT-ON " LUNETTE EYE WELD-ON MTG. CHANNEL w/weld-on L-EYE /" BOLT-ON REF. NO. PART NO. PART DESCRIPTION QTY. See Above Outer Case and Inner Slide Assy Bearing (Top and Bottom) Bearing (Side) Front Roller Front Roller Bolt Cotter Pine /8 X / Front Roller Cover Breakaway Chain 4 ft S-Hook Breakaway Lever Assembly Weather Seal Breakaway Lock - Left Breakaway Lock - Right Lockwasher 5/6 Std Bolt - Hex 5/6 NC X 5/ Cylinder Cover Bolt - Hex 5/6 NC X / Star Lockwasher /8 (Included in 746 Assy.) Plastic Cylinder Plug (Included in 746 Assy.) Master Cylinder -/4" Bore Drum Brake Master Cylinder Disc Brake 0 Push Rod Assmebly (Included in 744) 5000 Filler Cap (Included in 744) - -5/8-8 NEF Gasket Connector, /64 Orifiece Drum Brake , Connectors Disc Brake Cylinder Bracket Assembly Cylinder Bracket Assembly Bolt - Hex /8 NC X " Nut - Hex /8 NC Push Rod Block Damper Rear Roller Master Pin Cotter Pin Nylon Washer 9/ X -/ Damper Pin Lockwasher /" Zinc Hex Nut / Zerk 5/ Outer Case Primer w/-/" Offset, Zinc Plate available Outer Case Primer w/" Offset, Zinc Plate available Master Cylinder Repair Kit Disc Brake