Aero Materiel. Locks and latches
|
|
- Oswald Tate
- 5 years ago
- Views:
Transcription
1 Aero Materiel Locks and latches
2 E3 Material and finish Zinc alloy, powder coated or chrome plated and steel plated Max static load 300N NEMA4/IP65 sealing is achieved by using optional flange gasket Recommended tightening torque for the mounting nut is 20Nm and for the mounting screw in 10Nm E3 Stainless
3 E3 Zinc
4 E3 Part no Part no latch Head style Grip Finish E Slot 31 Chrome E quare 31 Chrome E double bit 31 Chrome E T-handle, non-locking 31 Chrome E T-knob 31 Chrome E T-handle, key-locking 31 Chrome E Slot 31 Black E quare 31 Black E double bit 31 Black E T-handle, non-locking 31 Black E T-knob 31 Black E T-handle, key-locking 31 Black E quare 31 Stainless steel E Slot 31 Stainless steel E T-knob 31 Stainless steel All other grip you need to order additional cam as per table Part no cam. Part no cam Grip Steel Stainless steel 15 E E E E E E E E E E E E E E E E Included in latch Included in latch 33 E E E E E E E E E E E E E E Part no Key Finish E double bit Zink natur E fyrkant Zink natur 47 E E E E E E E E
5 E5 Aero Material normal have some versions of cam latches in stock Latches achieves IP65/NEMA 4 when use supplied gasket Our latches are avalible in zinc alloy, powder coated, chrome plated or stainless steel 304 Cams in steel zinc plated and stainless steel Latch, cam and key orders separatley, lock core key locking T/L-handles orders separatly Stainless steel 316, other threatments, alternative headstyles, keycombinations, two point versions, please contact Aero Materiel Max static load Stainless steel N Zinc alloy 330N T/L-handles 330N Max tightening torque lock nut Stainless steel Nm Zinc alloy 10Nm T/L-handles 10Nm Max tightening torque cam screw Stainless steel Nm Zinc alloy 5Nm T/L-handles 10Nm E5 Stainless steel
6 E5 Zinc E5 Cylinder lock
7 E5 L-handle E5 T-handle
8 Part no latch Head style Finish E UU1 Slot Stainless Steel E UU1 8 square Stainless Steel E UU1 3 double bit Stainless Steel E UU1 Slot Powder coated black E UU1 8 square Powder coated black E UU1 3 double bit Powder coated black E UU1 Slot Chrome plated E UU1 8 square Chrome plated E UU1 3 double bit Chrome plated E UU1-1 L-handle non-locking Chrome plated E UU1-1 L-handle non-locking Powder coated black E UU1-1 L-handle key-locking without core Chrome plated E UU1-1 L-handle key-locking without core Powder coated black E UU1-1 T-handle non-locking Chrome plated E UU1-1 T-handle non-locking Powder coated black E UU1-1 T-handle key-locking without core Chrome plated E UU1-1 T-handle key-locking without core Powder coated black E UU1-12 Cylinder lock Chrome plated E UU1-12 Cylinder lock Powder coated black Part no cam Grip (mm+2/-0) Steel zincplated Stainless Steel 4 E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E5 Hooked cam and key Part no Key Finish E double bit Zinc natural E square Zinc natural Grip Part no hooked cam Rotation 18 E Clockwise 18 E Anti-clockwise
9 CM Cam locks wing driver or removable core Housing, lockcores(with key) and cams sold separatly Different key codes(kd) and masterkey(mk) by customer order Meets NEMA 4 and IP65 intrusion standards Material and finish Housing: Zinc alloy, chrome plated or black powder coated Lock core: Zinc alloy, chrome plated, black powder coated, scalp stainless steel with or without dustshutter Cam:Steel plated Average ultimate load on cam: 180N CM Housing PK Lockcore Lockcore Keyed alike Finish PK KA Black without dustshutter PK KA Chrome without dustshutter PK KA Stainless steel scalped without dustshutter PK KCH751 KA Stainless steel scalped with dustshutter
10 CM Wing driver CM Cam
11 Grip Max panel thickness Housing length 20,7 17,5 14,3 11,1 8 4,8 1,6 2,4 7 25,4 22,2 19,1 15,9 12,7 9,5 6,4 7,1 1 31,8 28,6 25,4 22,2 19,1 15,9 12,7 13,5 2 38,1 34,9 31,8 28,6 25,4 22,2 19,1 19,8 6 44,5 41,3 38,1 34,9 31,8 28,6 25,4 26,2 3 50,8 47,6 44,5 41,3 38,1 34,9 31,8 32,5 4 57, ,8 47,6 44,5 41,3 38,1 38,9 5 Part no Cam offset longer No offset Cam offset short Length Rotation CM-C606 CM-C406 CM-C206 CM-C006 CM-C206 CM-C406 CM-C606 19,1 CM-C610 CM-C410 CM-C210 CM-C010 CM-C210 CM-C410 CM-C610 31,8 CM-C614 CM-C414 CM-C214 CM-C014 CM-C214 CM-C414 CM-C614 44,5 CM-L606 CM-L406 CM-L206 CM-H006 CM-H206 CM-H406 CM-H606 19,1 CM-L610 CM-L410 CM-L210 CM-H010 CM-H210 CM-H410 CM-H610 31,8 CM-L614 CM-L414 CM-L214 CM-H014 CM-H214 CM-H414 CM-H614 44,5 CM-H606 CM-H406 CM-H206 CM-H006 CM-L206 CM-L406 CM-L606 19,1 CM-H610 CM-H410 CM-H210 CM-H010 CM-L210 CM-L410 CM-L610 31,8 CM-H614 CM-H414 CM-H214 CM-H014 CM-L214 CM-L414 CM-L614 44,5 No hook Left Right Lock Cam Part no H Max panel thickness Finish Part no C L CM-1-1B109-1B 16 7,1 Black CM-C CM-1-1B101-1B 16 7,1 Black CM-C ,8 CM-1-1C101-1C 16 7,1 Chrome CM-C ,5 Wing driver CM-1-1C109-1C 16 7,1 Chrome CM-C206 3,2 19 CM-1-2B101-1B 22 13,5 Black CM-C210 3,2 31,8 CM-1-2B109-1B 22 13,5 Black CM-C214 3,2 44,5 CM-1-2C101-1C 22 13,5 Chrome CM-C406 6,4 19 CM-1-2C109-1C 22 13,5 Chrome CM-C410 6,4 31,8 CM-1-3B101-1B 35 26,2 Black CM-C414 6,4 44,5 CM-1-3B109-1B 35 26,2 Black CM-C606 9,5 19 CM-1-3C101-1C 35 26,2 Chrome CM-C610 9,5 31,8 CM-1-3C109-1C 35 26,2 Chrome CM-C614 9,5 44,5 CM-3-1B101-NUB 16 7,1 Black CM-H CM-3-1B109-NUB 16 7,1 Black CM-H ,8 CM-3-1C101-NUB 16 7,1 Chrome CM-H ,5 CM-3-1C109-NUB 16 7,1 Chrome CM-H206 3,2 19 CM-3-2B101-NUB 22 13,5 Black CM-H210 3,2 31,8 CM-3-2B109-NUB 22 13,5 Black CM-H214 3,2 44,5 CM-3-2C109-NUB 22 13,5 Chrome CM-H406 6,4 19 CM-3-2C101-NUB 22 13,5 Chrome CM-H410 6,4 31,8 CM-3-3B101-NUB 35 26,2 Black CM-H414 6,4 44,5 CM-Housing CM-3-3B109-NUB 35 26,2 Black CM-H606 9,5 19 CM-3-3C101-NUB 35 26,2 Chrome CM-H610 9,5 31,8 CM-3-3C109-NUB 35 26,2 Chrome CM-H614 9,5 44,5 CM-3-4B101-NUB 41 32,5 Black CM-L206 3,2 19 CM-3-4B109-NUB 41 32,5 Black CM-L210 3,2 31,8 CM-3-4C101-NUB 41 32,5 Chrome CM-L214 3,2 44,5 CM-3-4C109-NUB 41 32,5 Chrome CM-L406 6,4 19 CM-3-5B101-NUB 48 38,9 Black CM-L410 6,4 31,8 CM-3-5B109-NUB 48 38,9 Black CM-L414 6,4 44,5 CM-3-5C101-NUB 48 38,9 Chrome CM-L606 9,5 19 CM-3-5C109-NUB 48 38,9 Chrome CM-L610 9,5 31,8 CM-3-6B101-NUB 28,5 19,8 Black CM-L614 9,5 44,5 CM-3-6B109-NUB 28,5 19,8 Black CM-3-6C101-NUB 28,5 19,8 Chrome CM-3-6C109-NUB 28,5 19,8 Chrome
12 R3 Finish Black powder coated Max tightening torque on mounting screws 2Nm Mountingplat and screw orders separate, contact Aero Material Part no R R Non-locking Locking (no core) Lock core see CM Material Latch Slide bolt Mountingplates Zink alloy Zinc alloy, zincplated Steel zincplated
13 C2 Material Zinc alloy, steel zinc plated Max static load 200N For door thickness greater than 5mm calculate screw length, door thickness +12mm Part no Grip range Lock style Finish C Non locking raised trigge Black powder coated C Key-locking raised trigger Black powder coated C Non locking flush trigger Black powder coated C Non locking raised trigge Black powder coated C Key-locking raised trigger Black powder coated C Non locking flush trigger Black powder coated
14 N2 Part no steel Grip range Material Min Max Steel zinc plated N Steel zinc plated Steel zinc plated N Steel zinc plated N Steel zinc plated Stainless steel N Stainless steel Stainless steel N Stainless steel N Stainless steel Part no latch Max static load Material N Non locking 1000N Stainless steel, aluminum, black powder coated and plated steel N Key locking 1000N Stainless steel, aluminum, black powder coated and plated steel N Non locking 1800N Stainless steel N Key locking 1800N Stainless steel
15 C5 Material and finish Zinc alloy, powder coated and steel plated Max static load 445N NEMA4/IP65 sealing is achieved by using optional flange gasket and sealing the mounting screw threads Part no Head style Grip Finish C Non locking 1-14 Black C Key locking without core 1-14 Black Lock core see side CM
16 1500 Latch Keeper Spacer Material Steel zincplated 1500-SS SS Stainless steel Slide action clearance 17 Ø Surface Mount Concealed Mount Keeper Latch 10.0 Clearance hole 5.58 Max P Spacer Stand off post Panel thickness P Required number of spacers 3.96 Rivet No.8 Screw & nut No.8 RD. HD. Wood screw Spacer 2 Spacers Inside diameter of keeper and spacer: 4.4
17 Pushlock Key alike standard, combinations contact Aero Materiel WL
18 WL237, WL238 Unlocked position Locked position Panel preparation Part no Length Material Zinc alloy, nickel plated WL237 9 Zinc alloy, zinc plated WL Zinc alloy, zinc plated WL Aliminium, steel zinc plated
19
20 Österängsvägen 16, Box 5031, Jönköping, Sweden, Tel: , Fax:
Multiple key codes Tool actuation Change key codes in future Configure to order. Page 164 Page 164
162 CM Cam Locks Selection Removable core options provide maximum flexibility Fixed core options provide simple, economic solutions Sealed housings are available Multiple finishes A broad selection of
More informationModularity and simplicity in action. A variety of materials and finishes to complement your application. Die-cast zinc latch bodies standard finishes:
116 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationModularity and simplicity in action. ÂÂ Cost effective, easy to design and install
84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationH3 Swinghandle System
192 H3 Swinghandle System Medium / large Sealed / non-sealed Zinc alloy swinghandle system Multiple locking options; including DIN profile Indoor/outdoor version Available for medium (125mm x 25mm and
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More informationAC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
More information64 Push-to-Close Latch
244 64 Push-to-Close Latch Pull-to-open Paddle latch Miniature Plastic slide 11 (.42) Stainless steel, passivated and brushed finish and glass-filled reinforced nylon, black working load: 90 N (20 lbf)
More informationQuarter-Turn Pr20.1 L18
1-100.01 Quarter-Turn Pr20.1 L18 for cutout 20.1, length 18, low profi le 15 Nm IP 65/67 Specially low profile Quarter-Turn. RH or LH application. This Quarter-Turn consists of three basic parts which
More informationAC Single Point Actuator
130 AC Single Point Actuator T-handle Surface mount installation Generous grip area Pull to activate Cable clip 20.8 (.82) 21.7 (.85) 23 (.91) Housing: PC/ABS, black T-handle and slide: 33% glass-filled
More informationLift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
More informationHandle Stainless Steel. wgt. 0.24kg. Handle Plated Diecast Steel. wgt. 0.19kg. Handle Plated Diecast Steel. wgt. 0.08kg. Handle Plated Diecast Brass
HANDLES GRAB/PULL No. HAPL2550/265SS wgt. 0.24kg 265mm hole centres 2 x 10mm dia. fixing holes Plated Diecast Steel No. HAPL2923/150 wgt. 0.19kg 150mm hole centres 2 x 6mm dia. fixing holes Plated Diecast
More informationQuarter-turn locks, compression latches
Quarter-turn locks, compression latches 435 K0518 Quarter-turn locks small version 2,5 13,5 4,5 SW 20 Ø20 max. 5 Ø16,2 14,2 Housing and actuator die-cast zinc. Housing and actuator chrome-plated. Wing-handle
More informationLOCKS Cam Locks P Push Locks P Plug Locks P Digital Locks P. 095
OCKS -1 Cam ocks P. 092-094 -2 Digital ocks P. 095-3 Push ocks P. 096-097 -4 Aluminium Frame & Drawer ocks P. 098-101 -5 Plug ocks P. 102-103 -6 Glass ocks P. 104-109 -1 Cam ocks Cam ock 16 * mm drilling
More informationRotary Medium Stylized wing 1.6 (.06) 1.3 (.05) 19 (.73) 48 (1.89) 1.6 (.06) 1.3 (.05) 18 (.71) 47 (1.85)
K Draw Latch Rotary Medium Stylized wing 1.6 (.06) 6.4 (.5) 9 (1.13) Stainless steel or steel, black powder coated Performance Details Steel: Max. working load: 130 N (75 lbf) Stainless steel: Max. working
More informationCut out PRODUCT CODE HANDLE BODY FINISH MATERIAL MODUL. 5 mm Double bit 8 mm Square 9 mm Triangular Button. Stainless steel dust cap (Keyed alike) 03
ROD-LATCH SYSTEM LINEAR HANDLE LOCK 204 V : 1 With mechanism Cut out Ergonomic and modern design Locking and unlocking by linear movement Suitable for inside & outside gasketing applications Swing handle
More informationCut Out Templates - Drop T & Compression Locks T1, T2, T3, V1, W1 C L LOCKS
111 112 Cut Out Templates - Drop T & Compression Locks T1, T2, T3, V1, W1 C L C L C L C L C L C L C L C L C L 113 C L PRODUCT NUMBER T1 T2 T3 V1 W1 EWTC140, EWTP140 WTC140, WTP140 UES052047 X UES052048
More informationDoor thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
More informationstyle vision & paddle latches paddle latches section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
paddle latches vision & style paddle latches INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 1 paddle latches No. 4000 No. 4000 Mini
More information1/2" 1-1/8" 3-3/16" Vertical Keyway 1/2" 3-3/16" 45 Keyway 1/2" 1-1/8" 45 Keyway
E-2008 E-2008 Contents: 1 lock: installation fasteners. Description: Mortise installation; steel housing and hook; square end face plate; keyway is in vertical position with hook fully extended; hook projection
More informationCAMLOCKS
CAMLOCKS 2 www.illinoislock.com 800-733-3907 CUSTOM ENGINEERED SOLUTIONS With more than 80 years of experience in lock design and manufacturing, Illinois Lock Company has developed a broad range of engineered
More informationACCESS SOLUTIONS NEW PRODUCTS BROCHURE.
ACCESS SOLUTIONS NEW PRODUCTS BROCHURE www.essentraaccesssolutions.com ESSENTIAL SOLUTIONS DELIVERED NEW PRODUCTS Locks Hinges Gaskets Handles Stainless Steel Products Electronic p3-6 p13 14 p17-18 p7-8
More informationCAM LOCKS CAM LOCK DD-CC ZAMAK - CHROME DD-CC ZAMAK - BLACK COATED DD-CC PLASTIC C C D D. web
063 LOCK ø 063 1-1-DD-CC ZAAK - CHROE 063 1-2-DD-CC ZAAK - BLACK COATED 063 2-0-DD-CC PLASTIC Quarter-turn operation Body length 20.5 mm (Please be sure to order appropriate cam) Available in all die-cast
More informationACCESS SOLUTIONS. NEW PRODUCTS OVER
OVER 250 NEW PRODUCTS ACCESS SOLUTIONS Search our range of over 2000 RoHS and REACH compliant parts, and find your industry solution across cabinet manufacturing, machine building, power generators, HVAC,
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More informationSlam-Cam Page. Material: a) Slam-Cam: zinc die, chrome plated Spring: steel, zinc plated Washer: Teflon
Slam-Cam Page 1-264 Slam-Cam for Slam Doors. Locking without key or tool. To a): The Teflon washer replaces the wave washer underneath the insert. Used with all Quarter- Turns and inserts according to
More informationstyle vision & push buttons push buttons section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
push buttons push buttons vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 149 notes 150 EBERHARD INDUSTRIAL, VEHICULAR
More informationLH: 21.1 GROUP CODE MATERIAL. Plastic. Keyed alike. 01 For cams please check page: Keyed differ Stainless steel dust cap (Keyed alike)
107 KNOB - ON LOCK 261 L: 21.1 27 Clip fixing for easy assembly. Mounting nut not required. Special 20mm x 26mm cut out. There is no IP 65 version of this lock. 1.8mm maximum panel thickness. Clips to
More informationPre-Packaged Hardware
New! Pre-Packaged Hardware Panel & Pilaster Packs 2-Ear Wall Bracket Headrail Bracket Wrap-Around Pivot Hinge () Strike / Keeper (Outswing) Slide (Outswing) Door Stop Door Hardware Packs The Story Originally
More informationLOCKS ORB1. Orbit Lock. Whale Tail Compression Lock WTC140, WTP COMPRESSED 68 RELEASED. MATERIAL Stainless Steel 304, Die-Cast Zinc Alloy
118 117 Orbit Lock ORB1 140 70 14 Stainless 304, Die-Cast Zinc Alloy Polished Chrome WEIGHT 1.4kg 156 132 84 62 M6 mounting screws supplied Suitable for tough conditions Fits standard T-lock cutout ACCESSORIES
More informationLocks. Product range:
Locks Product range: Coin Locks Combination Locks Espagnolette Locks Keys Lay on Locks Locks for Metal Furniture Lock Strikers Mortise Locks Padlock Handle Pedestal Locks Removable Cylinder Locks Rim Locks
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationLOCKS. Lock Cylinder and Keys. Installation. Removal. Key to Differ. Keyed Alike
PAGE 264 Lock Cylinder & Keys 265 Keys 266 Door and Drawer 270 Multi Drawer 272 Flat Multi Drawer 273 Anti Tilt 275 Double Door 276 Large Door 278 Sliding Door 278 Roller Shutter 279 Glass Door 281 Glass
More informationFURNITURE & CABINET LOCK
FURNITURE & CABINET LOCK LOCK HARDWARE Www.ammalocks.com DRAWER LOCKS 1 DRAWER LOCK (DIAMOND BACK) 15.7 2.7 106 ITEM NO: 106 100 key changes, K/A, K/D FINISHES: nickel PACKAGING: 2 keys SUITABLE FOR: 7/8"
More informationHinges Gasketing Handles Stainless Steel Toggle Latches Compression Latches Quarter Turns Rod Controls Locking Systems
Rod Controls Locking Systems Hinges Gasketing Handles Stainless Steel Toggle Latches Compression Latches Quarter Turns Locking Systems Hinges Gasketing Handles Stainless Steel Toggle Latches Compression
More information2600/2700 Series. Determining the stud length number when using receptacle: Type 1 + 3* G = P + F. * For Type 3: G = 9,9 mm min.
Particular Features Max. tensile strength 1.330 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle designs. 2600 Series: Fillister head; 2700 Series:
More informationCOMMERCIAL UPRIGHTS UPPER CASTING ASSEMBLY
UPPER CASTING ASSEMBLY 26 UPPER CASTING ASSEMBLY 1...E-53143...Shoulder Screw, 10 pk 2...E-268341...Adjustment Knob, 4 position 3...E-268331...Adjustment Knob, SC675A,SC684D, 33...E-5323813...Motor Screw,
More information19 Swell Action Latch
150 19 Swell Action Latch Plastic ylon and glass-filled nylon black with rubber bushing Ø 2.4 (.09) Acorn nut M6 Thread 39 (1.53) Handle / tee shaft sub-assembly 1.5 (.059) 400 (90lbf) 2.5 (.098) 690 (155lbf)
More informationHARDWARE TABLE OF CONTENTS
J HARDWARE TABLE OF CONTENTS Hardware Tie Loop...J- Safety Latches...J- S Hooks...J- Quick Link...J- Slip Hook...J- Grab Hook...J- Safety Chain...J- Chain...J- Snap Hooks...J- Rope Rings...J- D Rings...J-
More informationHandbook for Industrial Applications CATALOGUE SUPPLEMENT 2016 / Locks Latches Handles Hinges Sealing profiles Miscellaneous Stainless products
Handbook for Industrial Applications CATALOGUE SUPPLEMENT 0 / 07 Locks Latches Handles Hinges Sealing profiles Miscellaneous products CONTENT ONE PHILOSOPHY. MANY SOLUTIONS. About Industrilas Page - WWW:
More informationCabinet & Drawer Hardware
www.crh.com.au SOLUTIONS FOR TRADE Cabinet & Drawer Hardware November 2017 www.crh.com.au SOLUTIONS FOR TRADE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19
More informationHinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
More informationMETALPLAST-SOPRANA srl BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX
1 5 LOCKS >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 COMPRESSION LEVER LATCH WITH KEY CODES 140143-140142
More informationDoor Hinges Concealed Hinges
Concealed mortise hinge For installation in wall recesses For flush wooden or metal doors Suitable for DIN left hand and DIN right hand Certified for fire resistant and smoke control doors in compliance
More informationContents TRANSOM CLOSER 690 SERIES 23 LOCK OF GLASS DOOR 800 SERIES 24 AUTO HINGE 820 SERIES 25 PANIC EXIT DEVICE 910 SERIES 26
www.usaf.com.tw Contents ELECTRIC STRIKE 100 SERIES 1 E-SAVE SLIDER 171 SERIES 2 SHOWER HINGE 230 SERIES 3 SHOWER HINGE 240 SERIES 4 FREE HINGE 20 SERIES GLASS CONNECTOR 280 SERIES 6 PVC GASKET 290 SERIES
More information2300/2320. MORTISE LOCKS AND HANDLESET ACCESSORIES (Keepers, Spacers, Adapters and Bumpers)
HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS 2300/2320 Truth Hardware realizes that each profile in the marketplace may require its own particular hardware component due to the variety of mounting applications
More informationSwing Handles & Latches
ov-swing-handles-&-paddle-latches-divider - Updated - 12-01-2017 w Swing Handles - Cam Control Swing Handles - Rod Control Flush T-handle Latches Paddle Latches Swing Handles & Latches 30 Swing Handles
More informationMETALPLAST-SOPRANA srl BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX
5 LOCKS >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 COMPRESSION LEVER LATCH WITH KEY CODES 140143-140142
More informationTHIS PAGE LEFT BLANK INTENTIONALLY
THIS PAGE LEFT LANK INTENTIONALLY ARREL EXCHANGE SYSTEM The housings shown on this page all share a common part: an innovative removable barrel. In seconds, and without the need for any special tools,
More informationLocking System. White Paper
Locking System White Paper Contents Introduction...4 Easy Integration...4 Benefits...4 Floor standing Mild steel...5 Floor standing Stainless steel... 10 Floor standing Aluminum... 15 Wall mounted Mild
More information91 Draw Latch. Secondary Catch. Ø 2.6 (.102) Rivet holes (2.27) 9º 16.0 (.63) ACTUAL SIZE 10.1±0.1 (.398±.004) (.102 ) S +.
Under-center mall Adjustable 217 Latch tandard 23.6 10.1 (.93) (.398) 57.7 (2.27) Latch shown with 91-630-XX keeper 10.1 (.398) econdary Catch 23.6 10.1 (.93) (.398) 15.8 (.62) 17 (.67) 57.7 (2.27) Latch
More informationTelescopic Cover Support
6-170.01 Telescopic Cover Support long, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely,
More informationPT SS/MI - Pass Thru
PT 2424-24 SS/MI - Pass Thru TABLE OF CONTENTS 1) 2) 3) 4) Pass Thru Brochure Pass Thru Drawing Operation Instructions Parts List Latch Info Hinge Info Spring Info Halco Warranty Pgs. 2-3 Pg. 4 Pgs. 6-8
More information99125B - Series N Brush Lift Assembly Model :99125B 20" EZ Floorkeeper (w/ 4-6 V Batteries) - Series N
995B - Series N Brush Lift Assembly Model :995B 0" EZ Floorkeeper (w/ - V Batteries) - Series N Page- 5 7 9 0 5 7 9 5 7 9 0 5 7 9 0 070 RETAINING RING PIN 9 WASHER 907 WELDMENT BRUSH LIFT PEDAL 900 PEDAL
More informationPUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Exit Devices Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy
More informationsection section eclipse series2 vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 15
vision & style section eclipse series INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 15 No. ECL-750-KP9 Patent pending No. ECL-750-KP9
More informationTelescopic Cover Support
6-170.01 Telescopic Cover Support long, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely,
More informationOverview. Bosch Rexroth Corp /11 Aluminum Framing. Linear Motion and Assembly Technologies. Section 8: Air Supply Elements
91 500 201 0/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Overview Air supply elements convert certain profiles into compressed air bars. Convenient and flexible pneumatic connections
More informationCABINET LOCKS CABINET LOCKS. Distributed By. DH Pace National Key Service Center DHPace.
CABINET LOCKS Distributed By DH Pace National Key Service Center 855-237-3667 BestSolutions@dhpace.com DHPace.com/BestSolutions CABINET LOCKS 3L SERIES TABLE OF CONTENTS L Series Page 3L Features/specifications...................2
More informationProduct Datasheet. 2. GRP large rain canopy. 3. GRP door. 4. G.I Mounting plate. 5. G.I Gland plate. 6. EPDM rubber gasket
POLYESTER ENCLOSURE SINGLE DOOR Product Datasheet GRP Single Door Enclosures are used for outdoor application with weatherproof and antistatic properties, finding their major application in the protection
More informationLOGO OPTIONS: You can personalize the Fusion Lock with your logo. Truth s pad printing
DOUBLE HUNG SLIDER 19 Appropriately named the Fusion System, Truth Hardware has successfully merged two separate pieces of window hardware into one completely revolutionary system. Truth has designed a
More informationTable of Contents. Latches. Page. Two-Rotor. Single-Rotor 050- Sliding Bolt. Dead Bolt Two-Rotor Latch... 11
Table of Contents Latches Page Two-Rotor 050-0100 Two-Rotor Latch... 11 050-0103 Two Rotor Latch 2-Position Intertrip... 12 050-0107 Two-Rotor Latch With Coaxial Trip... 12 050-0110 Two-Rotor Single-Position
More informationCONCEPT Wall-Mount Enclosure Accessories
CONCEPT Wall-Mount Enclosure Accessories The CONCEPT Enclosure Group Accessory Selection Guide Steel section 4 or Stainless Steel Enclosures section 6 Steel section 4 or Stainless Steel Window-Door Enclosures
More informationMH3. Door Stops (Floor Mounts) Door Stops (Wall Mounts) Door Holders (Door Mounts)
CH-202NS...MH20 DB-008...MH11 DB-036a...MH11 DC-011...MH23 DC-018...MH21 DC-063...MH23 DC-070...MH12 DG-106N...MH21 DG-109...MH21 DG-110...MH21 DG-111...MH21 DP-042...MH23 DP-042L...MH23 DS-003...MH 4
More informationL SERIES: CABINET LOCKS. L Series. Cabinet Locks. BEST: Setting the Standard for Security
L SERIES: CABINET LOCKS L Series Cabinet Locks BEST: Setting the Standard for Security TABLE OF CONTENTS L Series 3L Features/specifications...2 3L How to Order...2 5L Latchbolt specifications/mounting
More informationAbout.
TM About Harris Hardware was founded in 1909 in Brooklyn, NY. During our long history, we have been a leading supplier of hardware to various specialty markets. Since 1980 Harris has manufactured custom
More informationHinges. Truckline Inc. Call Us at Tel: HINGES 8-1. Truck & Trailer Body Parts Mfg. & Sales
` Hinges Aluminum Hinges Stainless Steel Hinges Galvanized Steel Hinges HINGES 8-1 DOOR Hinges TL-Hinge-22-00407 TL-Hinge-22-01047 TL-Hinge-22-01036 TL-Hinge-22-01046 TL-Hinge-22-01041 TL-Hinge-22-01043
More informationSECTION J CONTENTS OPTIONAL CONFIGURATIONS DESCRIPTION
SECTION J CONTENTS OPTIONAL CONFIGURATIONS DESCRIPTION PAGE Options Identification & Description J-1 Options Identification & Description J-2 Options Identification & Description J-3 Options Identification
More information1 cam motorcycle tie-down with Built-in Soft-Loop feature. Similar to Original Cam Tie-Down. Protects chrome & paint finishes. 5 1/2 ft.
1 Motorcycle/ATV Tie-Downs All 1 M&R Motorcycle tie-downs utilize 1200 lb. vinyl S hooks, 1500 lb. rated cams or 3300 lb. rated ratchets. Each tie-down is a 1200 lb. rated assembly and is available in
More informationTRI TOOL INC. TECHNICAL SPECIFICATION 301SP SHORT PERCH TUBE FACING AND SQUARING TOOL JANUARY, 2001
TRI TOOL INC. TECHNICAL SPECIFICATION 301SP SHORT PERCH TUBE FACING AND SQUARING TOOL JANUARY, 2001 MODEL 301SP TUBE FACING AND SQUARING TOOL The Model 301SP Tube Squaring Tool is designed specifically
More informationDOOR TECHNOLOGY ORDER CATALOG SECTION GU-SECURY Automatic European Profile Cylinder Operated Locks
DOOR TECHNOLOGY ORDER CATALOG SECTION 03.12 GU-SECURY Automatic European Profile Cylinder Operated Locks Table of Contents 03.12 SECURY Automatic European Profile Cylinder Operated Door Locks SECURY Automatic
More informationSpartan Mower Parts Manual RT
Spartan Mower Parts Manual RT Revision Date -- TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More informationCRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET
CRAFTSMAN in. TABLE SAW MODEL NO. 1.2100 REPAIR SHEET 44 144 4 Figure B 10 14 1 12 12 12 4 4 Figure A 14 1 1 1 1 4 1 4 121 2 4 140 1 11 11 11 42 1 1 120 12 21 40 4 1 141 2 4 11 SEE NOTE 11 114 0 1 2 2
More informationKey in Lever and Key in Knob Locksets. Locksets Key in Knob and Key in Lever
Key in Lever and Key in Knob Locksets Locksets Key in Knob and Key in Lever Key in Knob and Key in Lever Locksets Overview Lockwood offers a range of Key in Knob and Key in Lever locksets for all architectural,
More informationTruth Hardware (Awning Window)
Truth Hardware (Awning Window) 20-1/2" Single Pull Lever Operator Contents: 1 operator; 1 hook and 1 set of installation screws. "Y" Dimension "Y" Finish Part No. Under 2" TH-23070 Over 2" TH-23069 Under
More informationSpartan Mower Parts Manual RT
Spartan Mower Parts Manual RT TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension Assembly..-0 Drive
More informationDICTATOR RTS Tube Door Closer
DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is virtually invisible because being built into the door. The joint can only be seen when the door is open. The
More informationTRI TOOL INC. TECHNICAL SPECIFICATION MODEL 206B BEVELMASTER SYSTEM JANUARY, 2001
TRI TOOL INC. TECHNICAL SPECIFICATION MODEL 206B BEVELMASTER SYSTEM JANUARY, 2001 MODEL 206B BEVELMASTER PORTABLE LATHE SYSTEM The Model 206B BEVELMASTER is a portable I.D. mount machine tool for beveling,
More informationMulti-Point Lock Systems. Manufacturer & Wholesaler of Winly Products
ARCHITECTURAL, DESIGNER, BUILDER HARDWARE Multi-Point Lock Systems... 1 Gripsets... 4 Lever Handlesets... 12 Interior & Exterior Matching Sets... 14 Mortise Handlesets... 16 European Style Levers... 17
More informationAuxiliary Locks Cabinet Locks, Deadlocks, Padlocks
Auxiliary Locks Cabinet Locks, Deadlocks, Padlocks Table of Contents contents Yale Commercial Solutions...3 Finishes...4 How to Order...5 D Series Cylindrical Deadbolts...6-10 Mortise Deadlocks...11-12
More informationTRI TOOL INC. TECHNICAL SPECIFICATION Model 301 TUBE FACING AND SQUARING TOOL JANUARY, 2001
TRI TOOL INC. TECHNICAL SPECIFICATION Model 301 TUBE FACING AND SQUARING TOOL JANUARY, 2001 MODEL 301 TUBE FACING AND SQUARING TOOL The Model 301 Tube Squaring Tool is designed specifically to prepare
More informationCam, Cabinet & Switch Locks
174 Cam, Cabinet & Switch Locks Cam, Cabinet & Switch Locks FEATURES Medeco 3 CLIQ Medeco XT Easily integrated into existing cam lock master key systems Easy installation Completely serviceable and may
More informationCorbin Russwin. Latches, cylinders, interchangeable CORE & spindle. Latches. Lockset Cylinders. Rim Cylinders. Interchangeable Core.
Latches Corbin Russwin Latches, cylinders, interchangeable CORE & spindle Mfg # Series Backset EZ # 486F90 626 4200 2-3/4 035270 Lockset Cylinders Mfg # Series Keyway EZ # 2000 052 59A1 626 4200, 5200
More informationSpartan Mower Parts Manual SRT
Spartan Mower Parts Manual SRT Revision Date -- TABLE OF CONTENTS SRT Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More informationL SERIES Cabinet Locks
CABINET LOCKS L SERIES Cabinet Locks TABLE OF CONTENTS TABLE OF CONTENTS L Series Page 3L Features/specifications...2 3L How to Order...2 5L Latchbolt specifications/mounting positions...3 5L Deadbolt
More informationsmartlock 2017 PRODUCT CATALOG
smartlock 2017 PRODUCT CATALOG 2 Table of Contents IR Ecosystem 5 IR Keys 6 Quick Reference Guide 8 L410 11 L430 12 Universal Locks 13 Plunger Locks 15 Cam Lock 16 Showcase Lock 19 Drawer Lock 20 3 Smart
More information5F Series. Miniature Stud Assemblies and Receptacles
5F Series. Miniature Stud ssemblies and Receptacles Features: Minimum stud head projection. Wide range of head styles. Variety of materials. Stud available with either retaining ring or snap-in grommet
More informationMETLAM PARTITION HARDWARE. Metlam Partition Hardware. > Washroom Hardware & Accessories
METLAM PARTITION HARDWARE Metlam Partition Hardware > Washroom Hardware & Accessories Metlam Proud to be Australian Owned Metlam is proud to be Australian owned and managed. Formed in the mid 1990 s, it
More informationSpartan Mower Parts Manual RT
Spartan Mower Parts Manual RT Revision Date -- TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More informationLOCK PLUG SYSTEM. Section D - Cabinet Locks & Latches. Timberline Interchangeable Lock Plug System One Lock Plug Fits All Cylinder Body Applications
LOCK PLUG SYSTEM Timberline Interchangeable Lock Plug System One Lock Plug Fits All Cylinder Body Applications Why Interchangeable Lock Plugs? If a new key is required to work a series of locks, substantial
More information2 CIRCUIT TRACK. Notes: INSTALLATION PROFILE SURFACE TRACK COLOR. Page 1/9. Date :12/06/17 Rev.02 WHITE POWDER COAT SILVER ANODIZED
2 CIRCUIT TRACK SURFACE TRACK COLOR INSTALLATION PROFILE WHITE POWDER COAT SILVER ANODIZED PLASTER FLANGE RECESSED VISIBLE FLANGE RECESSED BLACK ANODIZED Page 1/9 SURFACE TRACK SYSTEM : compose your system
More informationCOMPETENCE COMPONENTS FOR HVAC APPLICATIONS: SYSTEM SOLUTIONS! NEW DEVELOPMENTS
COMPETENCE COMPONENTS FO HVC PPLICTIONS: SYSTEM SOLUTIONS! The Klimaflex line of products is designed for HVC applications, fulfilling the strict requirements for housings of air conditioning, ventilation
More informationDouble action door rails
The solution for heavy doors. Convincing in quality and design. CONTENTS Technical details 26-29 Materials and surface finishes 290 Product information 105 mm door rails: 55/65 mm pivot point 291-292 22/24
More informationCamloc Quick-Operating
Camloc Quick-Operating Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 Overview Quick-Operating Fasteners...
More informationF3 Adjustable Tower Dual Stack Medical (With EVO Stack) F3ATM-E REV A
F3AT TOWER BOM (Quantities shown in table below are for (1) Tower. Actual quantity per machine is double.) PART NO. (EVO STACK)/QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-1331 2 ½ -13 UNC x 2¾ Bolt
More informationTRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS
CATALOGUE 2018 TRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS DESIGN AND CONSTRUCTION ON DEMAND CHANGES AND ADAPTATION 2 METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490
More informationSuper EZ Chain Saw UT Page 1 of 18 Tools And Accessories
Super EZ Chain Saw UT-10440 Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 2 of 18 Tools And Accessories 24299 24299 ANVIL- Crankshaft installation 24304 24304 BIT- #2 pozidrive 24295
More informationSTEEL CUPBOARD LOCKS FIRE-HOSE CABINET LOCK
013 IRE-HOSE CABINET LOCK Designed for fire-hose cabinet Special fixing plate supplied for easy fixing lush design provides flat surface on cabinet Customized colours available ire hose cabinet BODY: KNOB:
More informationHaul-Your-Might T3. Product Name: Product Code: Please read all instructions carefully before assembly, installation and/or use of this product.
WARNING: DO NOT exceed 800 lbs. (363 Kgs) WARNING: DO NOT exceed vehicle manufacturer s weight rating. Tools Required: 17mm Socket 5mm Hex Key 1/8 Hex Key Tape Measure 17mm Wrench 13mm Socket Hack Saw
More informationKAWNEER 1686 EL CONCEALED EXIT DEVICE
FEBRUARY, 2012 1 ROD AND CENTER CASE ASSEMBLY: 1) For inactive doors or doors without exterior cylinder, or doors without the need for exterior cylinder dogging, the removal of the cylinder dogging pawl
More informationSECTION CABINET LOCKS PART 1 GENERAL
SECTION 06414 CABINET LOCKS PART 1 GENERAL 1.1 SECTION INCLUDES A. Locks for drawers, swinging doors, and sliding doors of, including: 1. Drawer and Door Cam Locks. 2. Drawer Gang Locks. 3. Door and Drawer
More information