2 CIRCUIT TRACK. Notes: INSTALLATION PROFILE SURFACE TRACK COLOR. Page 1/9. Date :12/06/17 Rev.02 WHITE POWDER COAT SILVER ANODIZED

Transcription

1 2 CIRCUIT TRACK SURFACE TRACK COLOR INSTALLATION PROFILE WHITE POWDER COAT SILVER ANODIZED PLASTER FLANGE RECESSED VISIBLE FLANGE RECESSED BLACK ANODIZED Page 1/9

2 SURFACE TRACK SYSTEM : compose your system Compose your surface track system : Track + connector (coupler) + feed canopy Compose your suspended track system : Track + connector (coupler) + suspension kit Compose your recessed profile track system : Track + connector (coupler) + recessed profile + brackets Examples of configuration EARTH RUN LAYOUT HELP see configuration below as an exemple of track + coupler assembly ER = Earthing ER inside ER inside right ER left ER outside right ER inside ER left ER outside left ER outside X-coupler ER inside left X-coupler ER inside ER outside ER inside right ER left ER right ER right Draw your configuration here : CONNECTION DIAGRAM FOR DATA BUS WIRING Attention : no closed circle structure otherwise data bus functionality will not given. Page 2/9

3 SURFACE TRACK SYSTEM : track 2 circuit track 120V 1 7/ cm lenght voltage circuit USC-U /4 3.2 cm USC-U USC-U USC-U USC-U USC-U USC-U USC-U V C2 5-Conductor surface track for two circuits, consists of an extruded aluminum profile and two PVC supporter profiles, each with two impeded 12 gauge cross section copper conductors, for two independent switchable circuits, earthing through the aluminum profile. Easy field cut able with a standard saw, no cutting back or bending back of conductor necessary. The track has pre-punched slotted holes. USC-U Eutrac adapters with data bus contacts can be used in tracks without data bus. 2 circuit track 120V + DATA BUS 1 7/ cm lenght voltage circuit USC-U /4 3.2 cm USC-U USC-U USC-U USC-U USC-U USC-U USC-U USC-U V + databus C2 7-Conductor surface track for two circuits plus data bus, consists of an extruded aluminum profile and two PVC supporter profiles, each with two impeded 12 gauge cross section copper conductors, plus one PVC supporter profile with two impeded 22 gauge cross section nickel plated copper conductors, for two independent switchable circuits, earthing through the aluminum profile plus two data conductors. Easy field cut able with a standard saw, no cutting back or bending back of conductor necessary. The track has pre-punched slotted holes. The track system can be integrated into a building management system. surface track components MID FEED To be placed anywhere along the track USC-U USC-U USC-U USC-U USC-U USC-U END FEED CANOPY COVER MID FEED CANOPY COVER MULTIPLE LOCATION FEED COVER USC-U USC-U USC-U USC-U USC-U USC-U USC-U USC-U USC-U Page 3/9

4 SURFACE TRACK CONNECTION COMPONENTS System connectors 120V System connectors 120V + data-bus END FEED () earth side USC-U earth side USC-U USC-U USC-U USC-U USC-U END FEED () earth side USC-U earth side USC-U USC-U USC-U USC-U USC-U T-COUPLER ( ) earth side USC-U USC-U USC-U earth side USC-U USC-U USC-U T-COUPLER ( ) earth side USC-U USC-U USC-U earth side USC-U USC-U USC-U T-COUPLER ( ) earth side USC-U USC-U USC-U earth side USC-U USC-U USC-U T-COUPLER ( ) earth side USC-U USC-U USC-U earth side USC-U USC-U USC-U Page 4/9

5 SURFACE TRACK CONNECTION COMPONENTS (suite) System connectors 120V System connectors 120V + data-bus L-COUPLER () earth side USC-U earth side USC-U USC-U USC-U USC-U USC-U L-COUPLER () earth side USC-U earth side USC-U USC-U USC-U USC-U USC-U X-COUPLER USC-U USC-U USC-U USC-U USC-U USC-U I-COUPLER USC-U USC-U USC-U USC-U USC-U USC-U FLEX-COUPLER 30 to 330 USC-U USC-U USC-U USC-U USC-U USC-U STRAIGHT-COUPLER To join two sections of track electrically. For static reason order mechanical coupler (see page 7) if suspended via pendant rod or wire. USC-U USC-U USC-U USC-U USC-U USC-U Page 5/9

6 SURFACE TRACK SUSPENSION COMPONENTS : Stem & cable NOTE: Need cable or rod with track suspension clip (see p.7) mechanical universal hook suspension wire (no clip) surface track Stem (rod) kit and/or rod kit or cable kit + 2in clip mechanical coupler + rod kit or cable kit + straight coupler PENDANT ROD KIT USC-U Include 2ft pendant rod 3/8 IPS,cable gripper, coupler and canopy USC-U PENDANT ROD lenght USC-U USC-U USC-U USC-U USC-U To be used with pendant clips CANOPY KIT FOR ROD USC-U USC-U support canopy kit for pendant rod. Does not include rod. cable kit PENDANT CANOPY & CABLE KIT USC-U USC-U USC-U description 5 Support / feed canopy kit with pendant cable kit 5 Support / canopy kit with pendant cable kit 2 Support / canopy kit with pendant cable kit Incl. 4ft aircraft cable, canopy, cable gripper and coupler. complete with pendant clips PENDANT CANOPY KIT CABLE LOOP ASSEMBLY descripton USC-U Support / feed canopy kit USC-U Support / canopy kit USC-U Support / canopy kit USC-U USC-U USC-U description 4ft 8ft 12ft Incl. canopy & coupler. USC-U no cable Page 6/9

7 SURFACE TRACK SUSPENSION COMPONENTS : Clip & other Clips PENDANT ROD PENDANT CLIP 2IN SURFACE TRACK T-BAR MOUNTING CLIP USC-U For use with 15/16 t-grid system, with support independent of ceiling, include nut. Use with pendant clip 2in. Steel PENDANT CLIP 2in PENDANT CLIP 6in USC-U USC-U USC-U USC-U USC-U for suspension by steel wire or pendant rod. Include lock nut 3/8 IPS for posisioning over end feed USC-U MECHANICAL COUPLER USC-U USC-U USC-U for suspension by steel wire or pendant rod. Include lock nut 3/8 IPS To join two tracks mechanicly. Suspension components by wire on track SUSPENSION STEEL WIRE ON TRACK USC-U USC-U length 59 in (1.5m) 118in (3m) For mounting at pre-punched slot holes without need of pendant clips. Incl. wire and ceiling fixing set (nickel plated), adjustable height. MECHANICAL UNIVERSAL HOOK USC-U USC-U For loads up to 22lbs CAP FOR UNIVERSAL HOOK USC-U USC-U USC-U Page 7/9

8 RECESSED PROFILE : PLASTER FLANGE (spackle) SPACKLE FLANGE PROFILE USC-U Aluminium extrusion with invisible flange. length 150 (12.5ft) Incl. screws SUSPENSION BRACKET FEED IN CAP MECHANICAL BRACKET USC-U SPACKLE FLANGE PROFILE SUSPENSION BRACKET For spackle flange profile. incl. screws. Aluminum finish USC-U L COUPLER USC-U For spackle flange profile. Aluminum raw FEED IN CAP incl. screw. recommend to use one piece for every 4 ft. USC-U T COUPLER USC-U For spackle flange profile. Aluminum raw MECHANICAL BRACKET incl. screw. USC-U Do not incl. screws. recommend to use three pieces per joint. X COUPLER USC-U For spackle flange profile. Aluminum raw Page 8/9

9 RECESSED PROFILE : VISIBLE FLANGE (t-bar) T-BAR PROFILE USC-U White powder coated extrusion with visible flange. length 144 (12ft) Incl. screws SUSPENSION BRACKET FEED IN CAP SUSPENSION CLIPS MECHANICAL BRACKET USC-U T-BAR VISIBLE FLANGE PROFILE For t-bar profile. Whiite powder coat end cap. Incl. screws FEED IN CAP USC-U incl. screw. SUSPENSION BRACKET USC-U incl. screw. recommend to use 1 piece for every 4 ft. MECHANICAL BRACKET USC-U Do not incl. screws. Recommend to use three pieces per joint. SUSPENSION CLIPS USC-U For t-bar profile, for tension grip, 6pcs. Recommended to use 2 clips for every 4 ft. Page 9/9