5F Series. Miniature Stud Assemblies and Receptacles
|
|
|
- Bethany Bishop
- 6 years ago
- Views:
Transcription
1 5F Series. Miniature Stud ssemblies and Receptacles Features: Minimum stud head projection. Wide range of head styles. Variety of materials. Stud available with either retaining ring or snap-in grommet for quick assembly. Small and compact, these fasteners feature a high strength-to-weight ratio. They are specifically designed for use on miniaturized equipment. Note: Part numbers shown are basic part numbers only. See ordering information on Page -18 and -19 for required dash numbers. * S= (.015 x Dash No. ) Slotted Recess * S= (.015 x Dash No. ) Cross Recess S tainless 5S35-[ ] 5 S34-[ ]-[ ]BB 5S15-[ ] 5 S54-[ ]-[ ]BB 5S55-[ ]-[ ]BB (Cadmium Plated) 5S5-[ ] 5 S34-[ ]-[ ] 5S1-[ ] 5 S54-[ ]-[ ] 5S10-[ ] 5S55-[ ]-[ ] (Nickel Plated) 5 S27-[ ] 5 S28-[ ] (Satin Black Enamel) 5 S5-[ ] (Chrome Plated) Maximum Service Temperatures 300 F. 5 S15 = 550 F. (Supplied with S.S. washer in lieu of nylon.) ll others 300 F. 300 F. Plastic Knob Styles Basic Part Nos. S hank : (zinc plated) Maximum Service Temperature: 300 F. T-Knob Nylon Snap-in Knurled Knob Nylon Snap-in Black Red Grey Beige 5S58-[ ]-1 5S58-[ ]-1B 5S58-[ ]-1C 5S58-[ ]-1D 5S51-[ ]-[ ] 5S51-[ ]-[ ]B 5S51-[ ]-[ ]C 5S51-[ ]-[ ]D 5S59-[ ]-1 5S59-[ ]-1B 5 S59-[ ]-1C 5S52-[ ]-[ ] 5S52-[ ]-[ ]B 5 S52-[ ]-[ ]C **Note: Use of grommet increases maximum head protrusion.030 inch. -14
![Typical ssembly Used 5S25-[ ]B 5S57-[ ]-[ ]BB 5S37-[ ]-2BB 5S60-[ ]-[ ]BB 5S44-[ ]-1 5S37-[ ]-1 5 S60-[ ]-[ ] 5S7-[ ] 5S25-[ ] 5 S57-[ ]-[ ] 300 F. 5S37-[ ]-2BB version: 550 F.](/docs-images/77/76491479/images/2-1.jpg "(supplied with stainless steel washer in lieu of nylon). versions: 300 F. 5S7=450 F. 5S44=550 F. The position of handle relative to cross pin varies by part number.")
2 Typical ssembly Used 5S25-[ ]B 5S57-[ ]-[ ]BB 5S37-[ ]-2BB 5S60-[ ]-[ ]BB 5S44-[ ]-1 5S37-[ ]-1 5 S60-[ ]-[ ] 5S7-[ ] 5S25-[ ] 5 S57-[ ]-[ ] 300 F. 5S37-[ ]-2BB version: 550 F. (supplied with stainless steel washer in lieu of nylon). versions: 300 F. 5S7=450 F. 5S44=550 F. The position of handle relative to cross pin varies by part number. Specifications: Ultimate tensile strength: 150 lbs. Working strength: 100 lbs. Stud grip increments:.015 inch For optional styles, materials and finishes, contact the Camloc Products Division. Order separately. not required when Snapin Grommet style is specified. See Page -58 for installation. Part No. 5S3-1 (Cadmium Plated) Maximum Service Temperature 450 F. 5S3-2 Stainless 550 F Weight per 100 pcs.:.02 lbs. -15
3 Receptacles Clip-on Type Clip-on Type receptacle used on electronic chassis rail. Standard or Side Mounting Versions P art No. Ref. B C D 5R R Standard Mounting Part No. Side Mounted Part No. 5R2-1 5 R3-1 (Cad. Plated) 5 R2-2 (Cad. Plated) 5 R2-3 Stainless 5 R2-4 Stainless (5R2) weight per 100 pcs.: 0.21 lbs. (5R3) weigth per 100 pcs.: 0.54 lbs. Rivet Holes Temp. P lain 450 F. D impled 450 F. P lain 550 F. D impled 550 F. Panel Preparation and Installation Data Studs with Snap-In Grommet Protruding Head Studs with Flush Head Studs with Form through hole to diameter. Panels with thicknesses greater than.115 inch must be back counterbored to a concentric.375 inch diameter with a remaining material thickness of.115 inch max. Note: Snap-in grommets will protrude from the backside of the panel. Minimum total thickness G must be observed to prevent grommets from jamming against the receptacle. P max. G min Determine panel thickness P and form through hole to corresponding X diameter. Note: Panels with thicknesses greater than.090 inch must be back counterbored to a concentric.375 inch diameter with a remaining maximum material thickness of.090 inch. P X dia. up to Panel preparation is the same as for protruding heads except countersink is required as shown. minimum panel P thickness of.030 inch is recommended. P X dia Insert stud through panel and attach retaining ring. Insert stud through panel and attach retaining ring. Place stud/grommet assembly on hole and push down to snap into place. -16
4 Panel Preparation and Installation Data (Continued) Frame Preparation for Receptacle Installation (Rivet Type) 5R2 Standard Mount Stud Ejector Spring For Plain Rivet Holes Provides full retraction of stud assembly to allow opening and closing of equipment without the possibility of jamming or damage. Part No. S11-1 S11-1 and Finish pring (Cad. Plated pring (Black Finish Temperatur e 450 F 450 F 5 S ). 5 S ). Note: dd.015 to total G thickness when using this part. Weight per 100 pcs.:.23 lbs. Frame Preparation for Clip-On Receptacle Installation Part No. Frame Thickness B Min. 5R R Form through hole to diameter. Recessed Frame Standard installation will cause minimum gap of.025 inch between panel and frame due to receptacle protrusion. T o eliminate gap, dimple frame to provide recess as shown. Slide receptacle onto frame and locate on through hole. -17
5 . Order Information/Stud and Grommet Dash Number Selection. Using Clip-On Receptacles. To Select Stud Dash Number. 1. Determine G thickness. Note: Increase G to allow for thickness of paint or other finishes and for the compressed thickness of any gasket. 2. Stud dash number varies with retention method ( vs. Snap-in Grommet). This information must be known before proceeding. 3. Locate G total thickness from the table below right. 4. Then find the corresponding stud dash number in the column designated for the selected method of retention. 5. When using Snap-in Grommets, specify the Grommet dash number corresponding to top panel thickness P. -18 How to Order: Example 1. (For stud assemblies using retaining ring) Stud ssembly Used: 5Sb- [?] G Total Thickness =.160 inch Retention Method = Stud Dash Number From T able = -17 Complete Part Number: 5S5-17 Example 2. (For Stud assemblies using snap-in grommet) Stud ssembly Used: 5S34-[ ]-[ ]- Grommet Dash Number Stud Dash Number Basic Part Number G Total Thickness =.160 inch Stud Dash Number from T able = -18 P Panel Thickness =.053 Grommet Dash Number From T able = -5 Complete Part Number: 5S GROMMET DSH NUMBER SELECTION P Max. D ash Numbers G Min * *.170 *Contact Camloc Stud Part Number Structure 5S71-[ ]-1C and Finish Stud Dash Number (Based on Total Thickness, G ) Basic Part Number For Studs Clip-On Receptacles Stud Dash Number Selection Stud ssembly G Tota l Thicknes s For Studs Using For Studs s Snap-in Grommets *Note: If G total thickness is very near the top of the thickness range, selection of the next greater dash number is recommended. For G thicknesses greater than those tabulated, contact Camloc Products Division.
6 Using Rivet Type Receptacles. To Select Stud Dash Number. 1. Determine G thickness. Note: Increase G to allow for thickness of paint or other finishes and for the compressed thickness of any gasket. 2. Stud dash number varies with retention method ( vs. Snap-in Grommet) and with the receptacle used. This information must be known before proceeding. 5R2 STNDRD MOUNT RECEPTCLE 3. Locate G total thickness from the table below. 4. Then find the corresponding stud dash number in the column designated for the selected combination of retention and receptacle. 5. When using Snap-in Grommets, specify the Grommet dash number corresponding to top panel thickness P. 5R3 SIDE MOUNT RECEPTCLE Note: dd.015 to total G thickness when using stud ejector spring. How to Order: Example 1. (For stud assemblies using retaining rings.) Stud ssembly Used: 5S5-[?] G Total Thickness =.160 inch Receptacle Used = 5R2 (Standard Mount) Retention Method = Stud Dash Number From T able =-10 Complete Part Number: 5S5-10 Example 2. (For stud assemblies using snap-in grommets.) Stud ssembly Used: 5S34 - [?] - [?] - Grommet Dash Number G Total Thickness =.160 inch Receptacle Used = 5R2 (Standard Mount) Retention Method = Snap-In Grommet Stud Dash Number From T able =-11 P Panel Thickness =.053 Grommet Dash Number From Table =-6 Complete Part Number: 5S Stud Dash Number Basic Part Number GROMMET DSH NUMBER SELECTION P Max. Min. Grip G Total Thickness For Studs Standard Or Side Mount Receptacles Stud Dash Number Selection Stud ssembly For Studs Using For Studs s Snap-In Grommets Receptacles Receptacles 5R2 Std. Mount 5R3 Side Mount 5R2 Std. Mount 5R3 Side Mount Important Note: If the total thickness G is very near the top of the thickness range, selection of the next greater dash number is recommended. For G thickness greater than those tabulated, contact Camloc Products Division. -19
QUICK OPERATING 1/4-TURN FASTENERS
50F Series. General Purpose Stud Assemblies and Receptacles Features: Designed for use in agricultural, industrial, and similar environments where a simplified rugged design is desired. Studs are retained
2600/2700 Series. Determining the stud length number when using receptacle: Type 1 + 3* G = P + F. * For Type 3: G = 9,9 mm min.
Particular Features Max. tensile strength 1.330 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle designs. 2600 Series: Fillister head; 2700 Series:
Alcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
4002 Series. Determing the stud length number when using receptacle: Type Type 3. G = P + F (8,9 min.) Release January 2009 G-1
Particular Features Max. tensile strength.00 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle design. Floating receptacles available. Selection Instructions
D8 DZUS PANEX Quarter-Turn Fasteners
392 DZUS ANEX Quarter-Turn Fasteners Studs Size 4 Studs: Steel, zinc plated plus chromate or chrome plated Bail cover: ABS, black H Head Styles - Tool Actuated Oval Slot Hex Recess hillips Recess 1.3 (.051)
Selection Contents H Page No.
CAMLOC LATCES Included in this catalog is a wide choice of tension latches, pawl latches, flush-mounted panel latches and chassis latches. Each design provides secure lock-up, quick operating action and
Camloc Quick-Operating
Camloc Quick-Operating Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 Overview Quick-Operating Fasteners...
AC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
64 Push-to-Close Latch
244 64 Push-to-Close Latch Pull-to-open Paddle latch Miniature Plastic slide 11 (.42) Stainless steel, passivated and brushed finish and glass-filled reinforced nylon, black working load: 90 N (20 lbf)
Modularity and simplicity in action. A variety of materials and finishes to complement your application. Die-cast zinc latch bodies standard finishes:
116 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
ADJUSTABLE FOOT INSERTS FOR ROUND TUBING
ADJUSTABLE FOOT INSERTS FOR ROUND TUBING J D E F A B C G H I K INSERTS FOR 1-5/8 IN. (40MM) O. D. 16 GA. ROUND TUBING HEX FOOT Thermoplastic, or die-cast Zamak insert body with die cast or stainless steel
THE ULTIMATE FASTENER SYSTEM
THE ULTIMATE FASTENER SYSTEM Version A1 STEP 1 STEP 2 STEP 3 STEP 4 (98 DIFFERENT ITEMS) (108 DIFFERENT ITEMS) (104 DIFFERENT ITEMS) (103 DIFFERENT ITEMS) 4001 Plastic Fasteners 4023 Import Fasteners #1
Disco Automotive Hardware Sulphur, Oklahoma. Bumper Hardware. G.M. Bumper Hardware 11164PK. 50 Pcs. 50 Pcs PK 11142PK. 25 Pcs. 3010PK. 50 Pcs.
11164PK 4.2-1.41 x 20mm Phillips Washer Head 11mm O.D. Washer Head Black Finish Hi-Lo Thread Bumper Cover Screws G.M. # 22549046 11153PK 11142PK 3010PK 4.2-1.40 x 16mm Phillips Flat Top 8mm O.D. Washer
E3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
KASON EQUIPMENT LEGS AND ACCESSORIES SERTS FOR. RoHS COMPLIANT ALPHABETICAL INDEX CONTACT
KASON EQUIPMENT LEGS AND ACCESSORIES ALPHABETICAL INDEX BLE FOOT SERTS FOR D TUBING A Appliance Legs 1-inch...B-18 Heavy Duty... B-21 Standard... B-19 Suction Cup... B-20 C Cross Brace Fittings... B-24
Door thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
Air Cylinder eries CJ1 ouble Acting: ø/ingle Acting, pring Return: ø2., ø eries Variations tandard eries CJ1 eries Action ouble acting ingle acting Mounting style asic style ingle rod ingle rod pring return
Multiple key codes Tool actuation Change key codes in future Configure to order. Page 164 Page 164
162 CM Cam Locks Selection Removable core options provide maximum flexibility Fixed core options provide simple, economic solutions Sealed housings are available Multiple finishes A broad selection of
DANESMOOR 20/25-OOO /14 Bu rner. 9 Additional re Spa Parts. 7A 15/19 Bu rner 7B 20/25 Bu rner. Spare parts list
Spare parts list 6720620070 ANESMOOR 3 2 1 4 7 12/14 Bu rner 7A 15/19 Bu rner 7B 20/25 Bu rner 9 Additional re Spa Parts 23/04/2009 6720620070 1 23/04/2009 6720620070 2 23/04/2009 6720620070 3 Spare parts
NC Self-Clinching Nuts
NC Self-Clinching Nuts Features Provide load-bearing threads in thin sheets. vailable in a broad selection of inch and metric thread sizes. Self-clinching design provides quick and permanent installation
Washroom Accessories Service Parts List Price Book 0514WSP
Washroom Accessories Service Parts List Price Book 0514WSP Table of Contents Hair-Hand Dryers (Models 2870 thru 2874, 2889, 2896, & 2897) 2 Hand Dryers (Models 2875-28 & 2885-28, 2877-28 & 2887-28) 3 Aerix
RETRACTED SIDE MINIMUM. 4 1/4 in. [108.0 mm] CP-493 HANGER (WITHOUT TRIGGER) RETRACTED SIDE CP-007 CLIP ACTIVATED SIDE MINIMUM. [108.
![RETRACTED SIDE MINIMUM. 4 1/4 in. [108.0 mm] CP-493 HANGER (WITHOUT TRIGGER) RETRACTED SIDE CP-007 CLIP ACTIVATED SIDE MINIMUM. [108.](/thumbs/88/116251221.jpg "RETRACTED SIDE MINIMUM. 4 1/4 in. [108.0 mm] CP-493 HANGER (WITHOUT TRIGGER) RETRACTED SIDE CP-007 CLIP ACTIVATED SIDE MINIMUM. [108.")
TYPE CC-NRB CATCH N CLOSE CROWDERFRAME POCKET DOOR KIT INSTRUCTION SHEET FOR NARROW DOORS 18 in [457 mm] TO LESS THAN 26 in [660 mm] WIDE ONLY ACTIVATED SIDE CC-493 HANGER (WITH TRIGGER) SEE RIGHT (COMPLETE
FC-S3 FC-5 FC-3 FC-TD FC-AP FC-LD FC-S
SPARE PARTS CATALOG FC-S3 FC-5 FC-3 FC-TD FC-AP FC-LD FC-S FC SERIES BREWERS FC-TS TABLE OF CONTENT Base Assemblies Pages 3-5 Cover Assemblies Pages 6-7 Tank Assemblies Pages 8-13 Fill Tube Assembly Page
style vision & miscellaneous miscellaneous section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
miscellaneous vision & style miscellaneous INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 311 miscellaneous No. 16377 No. 16858 Carb
SPARE PARTS CATALOG TC LD AP TD S LP ACE SERIES BREWERS
SPARE PARTS CATALOG TC LD AP TD S LP ACE SERIES BREWERS TS TABLE OF CONTENT Base Assemblies Pages 3-5 Cover Assemblies Pages 6-7 Tank Assemblies Pages 8-13 Micro Switch & Bracket Assemblies Page 14 Valve
TYPE CC-W CATCH N CLOSE CROWDERFRAME POCKET DOOR KIT INSTRUCTION SHEET FOR DOORS 26 in [660 mm] TO 48 in [1219 mm] WIDE ONLY
![TYPE CC-W CATCH N CLOSE CROWDERFRAME POCKET DOOR KIT INSTRUCTION SHEET FOR DOORS 26 in [660 mm] TO 48 in [1219 mm] WIDE ONLY](/thumbs/93/113592678.jpg "TYPE CC-W CATCH N CLOSE CROWDERFRAME POCKET DOOR KIT INSTRUCTION SHEET FOR DOORS 26 in [660 mm] TO 48 in [1219 mm] WIDE ONLY")
TYPE CC-W CATCH N CLOSE CROWDERFRAME POCKET DOOR KIT INSTRUCTION SHEET FOR DOORS 26 in [660 mm] TO 48 in [1219 mm] WIDE ONLY (COMPLETE TYPE CC-W KIT ILLUSTRATED. FRAMING BY OTHERS) CATCH N CLOSE TM CROWDERFRAME
US FUTABA ESTABLISHED 1983 NEW IN THIS SECTION OFFICE LINE. Short Type 4 5-1/8" ( mm) 23.5 Ø /4" 45 mm. 1-3/16" 30 mm 5/8" 15.
0 5 1-3/4" 1-3/16" 30 5/8" 15.8 15 ESTABLISHED 1983 31/64" 1 Ø 100 Ø + 1/" 1" 1/8" NEW IN THIS SECTION " Short Type 4 5-1/8" (100 130 ) Ø =, & 80 11 13 0 Ø 6 Extra Heavy Duty Adjustable Floor Leveler (Page
MODEL: LCD-1 SPARE PARTS CATALOG HOT LIQUID COFFEE DISPENSING UNIT FRESH COFFEE AT THE TOUCH OF A BUTTON
MODEL: LCD-1 HOT LIQUID COFFEE DISPENSING UNIT FRESH COFFEE AT THE TOUCH OF A BUTTON SPARE PARTS CATALOG 2 TABLE OF CONTENTS Door Assembly Pages 4-5 Pump Assembly Page 6 Tube Assemblies, BIB & Others Page
MAIN FRAME 84-G PART # DESCRIPTION QTY /4-20 X 1 SHCS /4-20 X 1 1/4 SHCS /16-18 X 3/4
MAIN FRAME 84-G30-3699-02 PART # DESCRIPTION QTY 99-280-7006-05 1/4-20 X 1 SHCS 2 99-280-7006-06 1/4-20 X 1 1/4 SHCS 2 99-280-7007-04 5/16-18 X 3/4 FHS. 1 99-280-7012-01 NUT, NYLOC 10-24, CAD PLATE 1 99-280-7015-01
Installation Instructions for Catalog No MAGNUM GRIP GATED SHIFTER for POLARIS RZR 900cc, 1000cc and TURBO (WITH BOOT)
Installation Instructions for Catalog No. MAGNUM GRIP GATED SHIFTER for 2014 2018 POLARIS RZR 900cc, 1000cc and TURBO (WITH BOOT) 1 2 3 4 5 6 Page 1 of 7 Installation Instructions for Catalog No. MAGNUM
Spare parts list DANESMOOR 26/32-OOO. Burner Additional re Spa Parts 23/04/
Spare parts list 6720620071 ANESMOOR 26/32-OOO 3 2 1 4 7 9 Burner Additional re Spa Parts 23/04/2009 6720620071 1 23/04/2009 6720620071 2 23/04/2009 6720620071 3 Spare parts list 1 Casing 23/04/2009 6720620071
RCA PLUG KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.
RCA PLUG KIT P/N 2883824 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation
GBP784B INSTALLATION TOOL
GBP784B INSTALLATION TOOL GAGE BILT MADE IN U.S.A. GAGE BILT PRODUCTS CORP. 14500 Barber Drive (586) 771-7664 Warren, Mi 48088 (586) 771-2665 Fax e-mail:solutions@gagebilt.com / www.gagebilt.com TABLE
Quarter-turn locks, compression latches
Quarter-turn locks, compression latches 435 K0518 Quarter-turn locks small version 2,5 13,5 4,5 SW 20 Ø20 max. 5 Ø16,2 14,2 Housing and actuator die-cast zinc. Housing and actuator chrome-plated. Wing-handle
D-subminiature Backshells - Two-Piece D*H Series
Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature
Lift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
Modularity and simplicity in action. ÂÂ Cost effective, easy to design and install
84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
WARNING READ ALL INSTRUCTIONS PRIOR TO INSTALLATION
SUPRA MULTITEMP HOST UNIT S PART NO. MODEL DESCRIPTION KIT NUMBER (REFERENCE) 980336900 SUPRA 950M/T TDD 760053727 WARNING READ ALL INSTRUCTIONS PRIOR TO INSTALLATION 1.0 INSTALLATION OF THIS REFRIGERATION
F479 HVE V PARTS LIST
F479 HVE 3000 115V PARTS LIST PARTS LIST 03-00105 18 SCREW 1/4 20 X.375 HWH NYLOC ZP 03-00179 1 GROMMET -.75 ID X 1.375 OD RUBBER 03-00208 4 RIVET 1/4 X 1/4 STL/STL ZP 8-4 03-00209 11 SCREW 1/4 20 X.50
CHERRYLOCK BLIND RIVET
CHERRYLOCK BLIND RIVET SPS Fastener Division, a PCC Company 1 1 CHERRYLOCK RIVET LIMITED WARRANTY Seller warrants the goods conform to applicable specifications and drawings and will be manufactured and
SELF-SEALING FASTENERS
CATALOG SF300 SELF-SEALING FASTENERS & SELF- SEALING WASHERS Recognized WHEN JUST FASTENING ISN T ENOUGH When just fastening isn t enough. Pre-assembled O-Ring Seals in Geometric Groove Visit our website
LIFEMIST NT WATER DISTILLER
LIFEMIST NT WATER DISTILLER REPLACEMENT PARTS MANUAL AND WIRING SCHEMATIC FOR MODEL: NT, LM-AED-1 & LM-APK-1 PART # 500033 500035 500034 SERIES 0014 0002 0001 02/08/11 PAGE 1 097079-S14A 02/08/11 PAGE
SKU Product Name Price AC Fuel Pump
Classic & Exotic Service, Inc. 2032 Heide, Troy MI 48084 USA Phone: 1.248.269.9414 E-mail: Parts@classicandexotic.com WWW: http://www.classicandexotic.com SKU Product Name Price AC Fuel Pump BUG-0020 BUG-0029
Local Control Station
Local Control Station As per table given below Ex'd', IIC, IP-66, FLP/WP Local Control Station and Switch MFPB/302/IIC-IEC MFPB/302/IIC-IEC MFPB/302/IIC-IEC MFRS/104/I/IIC-IEC MFRS/104/IIC-IEC A B C D
Beam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
Screwdrivers, Nut Drivers and Accessories
Screwdrivers, Nut Drivers and Accessories Offering a variety of tip types, hex sizes, shaft lengths, and handle designs, Klein has the screwdrivers and nut drivers professionals demand to get the job done
FREESTANDING WOOD FIRES LE 5000 S2. LE 5000 Black Page 2 Grey Page 2
Issue A April 2004 REF # 786998 FREESTANDING WOOD FIRES LE 5000 Black 986998 Page 2 Grey 986999 Page 2 Fans Three Speed SE - Black 986364 Page 6 Three Speed DE - Black 995370 Page 7 Fan Assy-Remote Control
Fuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
DT Series Technical Manual
Deutsch Industrial UK Stanier Road St. Leonards On Sea East Sussex TN 9RF England Ph. (0) 7 Fax (0) 979 industrialuk@deutsch.net Deutsch Industrial Europe Fraunhoferstrasse b Martinsried Germany Ph. +9
PARTS LIST CHAMP 2929
PARTS LIST CHAMP 2929 1 ITEM PART NO. DESCRIPTION QTY. 101 9122343 3/8-16 X 2 HEX HEAD FULL THREADED BOLT 3 102 9122100 3/8 SPLIT LOCK WASHER 3 103 9121400 3/8 I.D. X 7/8 O.D. X.064/.104 THICK WROUGHT
Tugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
sockets 1/ 4 3mm - 14mm 3/16-1/2 E4 - E10 3/ 8 6mm - 24mm 3/8-13/16 E4 - E20 1/ 2 8mm - 32mm 3/8-1.1/4 E10 - E24 3/ 4 17mm - 60mm
sockets All Sonic sockets are manufactured from a high grade of chrome vanadium steel with a superb finishment and shape. Tight tolerance on sizes and high quality finishment ensures perfect fit. The sockets
Flush Head Self Clinching Studs
SB Flush Head Self Clinching Studs Features Provide permanent male threads in sheets as thin as.040 (1.00mm). Ribbed self-clinching design mounts flush on the back of the sheet while transferring excellent
Page: REV 3: Add drill and tap information to Figure 4 DRILL #3, TAP 1/4-28 BOTH ENDS.
REVISION DESCRIPTION: 1) Page: 32-03 MEMO: Step 4 should not be bold. Fix WD-1213 callout in Figure 3. Page: 32-04 REV 3: Add drill and tap information to Figure 4 DRILL #3, TAP 1/4-28 BOTH ENDS. Add make
Installation Instructions Camaro/Firebird Raingear Windshield Wiper System
Installation Instructions 1970-78 Camaro/Firebird Raingear Windshield Wiper System A-2 A A-1 A-5 A-3 A-4 B Photo O The Raingear 1970-78 Camaro/Firebird wiper system is designed for ease of installation
FREESTANDING WOOD FIRES
FREESTANDING WOOD FIRES F12000 - AUSTRALIA Item No. MARKET FUEL TYPE FINISH YEAR FAN 995961 Gloss Black Enamel 995962 Matt Black Enamel Oct-2011 995963 AU HARDWOOD Charcoal VHt Paint Yes 995957 Charcoal
Vents & Fuel Fittings. Vents & Ventilators Collector Boxes Pitot Tube Shield Deck Plates Deck Plate Keys
7 Vents & Ventilators Collector Boxes Pitot Tube Shield Deck Plates Deck Plate Keys Hose Adapter Drains Deck Fills Deck Fill Keys Gas Tank Vents Ski Tows Vents & Fuel Fittings 7 Vents & Fuel Fittings LOUVERED
ELECTRICAL ACCESSORIES FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
ELECTRICL CCESSORIES FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Electrical Fittings Receptacles Fixture Hangers ccessories and Connectors Junction Boxes In-Channel Joiners Swivel Hangers Cable Entrance Tubing
Numatic International Spare Parts Model No: DRAWING: DRW /05/2015 PRO MINI RIDE ON GENERAL ASSEMBLY EXP
NB: FOR WIRING SEE DRAWING: DRW- 0V / A Charger DRW- 0V-V / 0A Charger DRW- 0V / A Charger DRW- V / A Charger DRW- Chargerless 0 0 MINI RIDE ON GENERAL ASSEMBLY EXP 0 0 0 0 DRAWING: DRW- /0/0 0 0 ISS:A0
Table of Contents. Incandescent Miniature EMI Suppressed Watertight Size T-1 3/ Incandescent Miniature Size T-1 3/
Indicator Products Table of Contents DESCRIPTION PRESSLITE TYPE OPTOLITE CONTINUED PAGE NUMBER DESCRIPTION TYPE PAGE NUMBER Friction Cap Bases EMI Suppressed Alternate Action 5 Amp S.P.D.T Form 99-36980
Aero Materiel. Locks and latches
Aero Materiel Locks and latches E3 Material and finish Zinc alloy, powder coated or chrome plated and steel plated Max static load 300N NEMA4/IP65 sealing is achieved by using optional flange gasket Recommended
BATHROOM HARDWARE. Bathroom Hardware
Bathroom Hardware s... 10-1 to 10-4 Shower Door Guides... 10-4 Shower Door Brackets... 10-5 Shower Door Sweeps... 10-5 Shower Door Latches... 10-5 Shower Door Handles... 10-5 to 10-6 Miscellaneous Shower
CAMLOCKS
CAMLOCKS 2 www.illinoislock.com 800-733-3907 CUSTOM ENGINEERED SOLUTIONS With more than 80 years of experience in lock design and manufacturing, Illinois Lock Company has developed a broad range of engineered
ROLL UP DOOR TRADITIONAL HANDLE BAR INSTALLATION INSTRUCTIONS
ROLL UP DOOR TRADITIONAL HANDLE BAR INSTALLATION INSTRUCTIONS ***** READ ALL INSTRUCTIONS BEFORE ***** ATTEMPTING INSTALLATION OF YOUR ROLL UP DOOR PRODUCT DOC NO: INST00001 REV: 11 CHG:STB APR: PJC ECN:
SINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS
SINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS SINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS MANET CONTENT MANET CONCEPT Sliding door system 6 21 Pivoting door system 22 35 Connection system 36 43
AV Series Dynamic Mount
60 AV Series Dynamic Mount Tilt and swivel Compact Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Consistent repeatable operation Factory
S2104. Concealed Pivot Hinges - Lift Off 20 mm door return - weld or stud - steel. wixroyd.com
20 mm door return - weld or stud - steel S2104 Steel and stainless steel (304 and 316). enclosures with door return. Main body mounted via two M 4 screws. Hinge plate either welded or screwed to enclosure
Ignitor supplied with Engine. Power Plant Group - Page 1 (AT-502B) Date: 1/18
4 9 8 9 48 0 4 4 0 0 4 4 Ignitor supplied with Engine 8 4 4 4 Power Plant Group - Page (AT-0B) Date: / POWER PLANT GROUP - Figure. Power Plant, Engine Mount, Oil Cooler and Ejector Installations 04-8 Engine
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
Hydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
PANEL FASTENERS AND HOLE PLUGS
NYLON MINI RIVETS Mini Rivets consist of a male and female component. Mini Rivets are used to fasten a variety of materials. Simply press together for fast, easy assembly. Male and female rivets are packaged
Retriever 134B. PARTS LIST Advance MODEL This parts list is for machines after serial number /96 revised 7/02 FORM NO.
PARTS LIST Advance MODEL 56467215 This parts list is for machines after serial number 1118383 3/96 revised 7/02 96-3 TABLE OF CONTENTS 3 DESCRIPTION PAGE Handle Assembly... 4-5 Chassis and Housing... 6-7
ROUSH Active Exhaust. Installation Instructions P/N: (R AVC) Fastback GT V8 - Convertible GT V8
Installation Instructions P/N: 422100 (R1318-5231AVC) Fastback GT V8 - Convertible GT V8 39555 Schoolcraft Rd, Plymouth MI, 48170 800.59.ROUSH ROUSH Active Exhaust Installation Instructions P/N: 422100
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto
AMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
Rack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
License Plate Lamps LICENSE PLATE LAMPS LICENSE PLATE LAMPS
License Plate Lamps 437 series LICENSE PLATE LAMPS 437-00, 10: 10-15/16" L. x 4-5/8" H. x 2-3/16" D. Two 1/4 mtg. holes on 2-1/2" centers. 437-08, 11: 4-1/8" L. x 3-7/16" H. x 2-3/16" D. Two 1/4" mtg.
Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return
Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation
Electrical Accessories
complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. -Line s surface raceways are
Handle Stainless Steel. wgt. 0.24kg. Handle Plated Diecast Steel. wgt. 0.19kg. Handle Plated Diecast Steel. wgt. 0.08kg. Handle Plated Diecast Brass
HANDLES GRAB/PULL No. HAPL2550/265SS wgt. 0.24kg 265mm hole centres 2 x 10mm dia. fixing holes Plated Diecast Steel No. HAPL2923/150 wgt. 0.19kg 150mm hole centres 2 x 6mm dia. fixing holes Plated Diecast
Whirlamatic UHSB 20 Whirlamatic UHSBD 20
Whirlamatic UHSB 20 Whirlamatic UHSBD 20 PARTS LIST Advance MODELS 56393500 (UHSB 20), 56393930 (UHSB 20) 56393600 (UHSBD 20 / OBSOLETE) 1/91 revised 12/05 91-1 05-3 TABLE OF CONTENTS 1 DESCRIPTION PAGE
TERMS and CONDITIONS
TERMS and CONDITIONS Hour of operation ( mountain standard time ) 8.00 AM to 12.00 PM 12.30 PM to 4.30 PM Monday to Friday Terms of Payment Net 30 days from date of invoice - The seller reserves the right
Product Datasheet. 2. GRP large rain canopy. 3. GRP door. 4. G.I Mounting plate. 5. G.I Gland plate. 6. EPDM rubber gasket
POLYESTER ENCLOSURE SINGLE DOOR Product Datasheet GRP Single Door Enclosures are used for outdoor application with weatherproof and antistatic properties, finding their major application in the protection
Positive Lock Receptacles
Positive Lock eceptacles Product Facts educed insertion force Locks onto tabs containing holes Housing insulates and serves as a removal tool Snap action tells assembler receptacle is mated properly Terminated
Sunfire Series. Full Size Electric Convection Ovens. Parts List. Models SCO-ES-10S SCO-ES-20S. Document Number: S_EO_PL_CONVECTION_SCOES Updated: 2/15
Sunfire Series Full Size Electric Convection Ovens Parts List Models SCO-ES-0S SCO-ES-20S Document Number: S_EO_PL_CONVECTION_SCOES Updated: 2/5 Rating Plate Location Door Door Motor Motor Rating Plate,
Bulletin 1494V Variable Depth, Flange Operated Disconnect Switch Kits for 400 and 600 Amperes (Series A) Switches
Bulletin 494V Variable Depth, Flange Operated Disconnect Switch Kits for and Amperes (Series A) Switches ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing.
Red-D-Arc GX 300 PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-493 RETURN TO MAIN INDEX PARTS LIST FOR Red-D-Arc GX 300 P-493 ILLUSTRATION
PIÈCES DÉTACHÉES. Chasse-neige. Révision 10/
PIÈCES DÉTACHÉES Chasse-neige 555 860 Révision 10/2004 Y v a n B é a l - 2 1, a v. d e l A g r i c u l t u r e - B. P. 1 6 Z. I. d u B r é z e t - 6 3 0 1 4 C l e r m o n t - F e r r a n d C e d e x 2
SPRINGS Extension Springs Standard : N
SR xtension Springs Standard : 0.7-147N W = Spring material width T = Spring material thickness L = Spring length (reference only) J = Minimum extension for constant force H = Off-set distance D2 = Storage
Series 801 Mighty Mouse Double-Start ACME Thread Receptacle
ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010
Parts Manual SERIES CVT Lawn Tractor. Model LT1040 CUB CADET LLC, P.O. BOX CLEVELAND, OHIO PRINTED IN U.S.A.
Parts Manual CVT Lawn Tractor SERIES 000 Model LT00 PRINTED IN U.S.A. CUB CADET LLC, P.O. BOX CLEVELAND, OHIO -00 FORM -00C.fm (//00) SERIES 000 CVT LAWN TRACTORS TABLE OF CONTENTS DESCRIPTION PAGE Axle,
Beryllium Copper Finger Strip
provides excellent EMI protection when used as a gasket, due to its high electrical conductivity. This combined with its other main features of high tensile strength, fatigue resistance and its spring
EN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
Magnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
MIL-C Circular Connectors
MIL-C-28840 Circular Connectors A high density, harsh environment connector designed to meet the most demanding environmental conditions and RFI/EMI shielding requirements. Delphi Connection Systems delivers
Parts Manual Rev. A RZT54 /
115 93 37-27 Rev. A Parts Manual RZT54 / 967 672101-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
M9/D (-020 thru -022) M11/D (-020 thru -022)
M/D (-020 thru -022) Item Description / Page Includes A Main Enclosure top cover / display panel assembly, leveling feet, hinge cover panels (side / back / base) B Reservoir / Drain Tube condensing coil,
MARK 8 SERIES. direct solenoid actuated valves MARK 8
SERIES direct solenoid actuated valves M a r k 8 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T E C H N I C L D T................................................... 3 V L V E S M O D E L S E