Ignitor supplied with Engine. Power Plant Group - Page 1 (AT-502B) Date: 1/18

Size: px

Start display at page:

Download "Ignitor supplied with Engine. Power Plant Group - Page 1 (AT-502B) Date: 1/18"

George Paul
5 years ago
Views:

4 9 8 9 48 0 4 4 0 0 4 4 Ignitor supplied with

2 Ignitor supplied with Engine Power Plant Group - Page (AT-0B) Date: /

3 POWER PLANT GROUP - Figure. Power Plant, Engine Mount, Oil Cooler and Ejector Installations 04-8 Engine Build-up (Pratt & Whitney PTA-AG) 04- Propeller Installation (includes items & 4) HCBTN-D/TNS+4 Propeller, blades, dia. prop. 4 D- Spinner Assembly with Hardware 09- Exhaust Assembly, left side 00- Exhaust Assembly, right side 04- Engine Mount Assembly 8 -SA Vibration Isolator (Barry) (inc. items 9 - ) 9 R0- Isolator Gasket NAS4A- Bolt MS00C Washer, Countersunk AN- Washer, Flat MS00C Washer, Countersunk 4 AN- Nut, Castellated MS- Pin, Cotter NAS0-H Bolt 00- Ground Cable (right side isolator only) - Plate, Ignitor Support MSDG Clamp, Cushioned (alt: MSWDG) MSDG Clamp, Cushioned - Airscoop Assembly (includes item ) - Tread 8- Oil Cooler Assembly (Inc. item ) 8A80-00 Thermostat (Standard Thompson) Oil Cooler Forward Support Assembly 080- Oil Cooler Aft Support Assembly 0- Bracket, Oil Cooler Support 4--S Adapter, Oil Cooler Inlet (Stratoflex) 4--S Adapter, Oil Cooler Outlet (Stratoflex) 0-4 Oil Cooler Inlet Hose Assy.(Stratoflex) - Oil Cooler Outlet Hose Assy.(Stratoflex) 8- Ejector Assembly (includes items - 8,, & ) - Ejector, Weld Assembly (includes items 0 & ) - Ejector Door - Spacer, Ejector Door Hinge - Hinge, Ejector Door / x Felt with PSA Backing (/8 wide) as reqd 8 - Spring, Tension 9 - Bracket, Door Stop Ejector H Clamp, Worm Drive (Breeze) 4 - Ejector Tube Assembly H Clamp, Worm Drive (Breeze) 4-8 Hose 08- Compressor Air Discharge Tube Weld Assembly 4 MS0- Bolt 4 ANC4 Washer, Flat Stainless 4 MS00-4 Nut, High Temp 48 NAS0DH Bolt, Internal Wrenching MS00C Washer, Countersunk High Strength 0 MS99C Safety Wire as reqd AN9-4 Bolt AN-9 Washer, Flat 4 AN-9 Nut, Castellated 4 MS- Pin, Cotter AN-A Bolt AN- Washer, Flat AN- Nut, Self Locking 8 AN-4A Bolt 9 AN- Washer, Large Area Flat 0 AN4-A Bolt 4 AN-4 Washer, Flat 4 AN-4 Nut, Self Locking 4 MS9-S Screw, Flat Head TYM Strap, Self Locking (Tyrap) 4 AN4B-4A Eyebolt MS4AD4 Rivet, Solid Universal Head TY0M-0 Strap, Self Locking (Tyrap) as reqd 8 40R- Receptacle (Camloc) 8 9 AN-L Washer, Flat Light 0 NAS80A Nut Plate MS4AD Rivet, Solid Flat Head M Tape M Electrical Tape as reqd -9N4- O-Ring, Oil Cooler 4-9N4- O-Ring, Oil Cooler Power Plant Group - Page (AT- 0B) Date: /

9 9 9 9 8 80 9 4 8 4 4 4 4 4 4 4 48 9 40 9 4 4 40 4 4 9 9 9 9 9 9 8 0 9 Power Plant Group -

4 Power Plant Group - Page (AT-0B) Date: / Detailed View On Page Below

5 POWER PLANT GROUP - Figure. Ram Air Engine Air Induction System Installation - Forward Plemum Cover Assy. (inc. items -,- & ) - Cover, Upper Plemun Half - Cover, Lower Plenum Half 4 - Cover, Lower Plenum Half / x /8 Cork Tape w/psa Backing as reqd 400 Clamp, Screw Drive (Mak-A-Clamp) 8 - Channel Assembly (inc. items 8,9 & 9 - ) 8 - Channel, Plenum Splice Clamp (Band Only) (Mak-A-Clamp) 8 NRC-E Teardrop Seal w/adhesive Backing(National Rubber Corp.) as reqd - Fwd Chin Inlet Firewall Assy.(inc. items -,,-&9) - Plate, Upper Forward Firewall - Plate, Lower Forward Firewall 4 - Band, Forward Firewall Seal, Upper - Band, Forward Firewall Seal, Lower - Plate, Splice Firewall (left side) - Plate, Splice Firewall (right side) - Angle, Band Attach - Angle, Band Attach 8 4- Angle, Band Attach - Angle, Band Attach - Duct Half, Upper - Duct Half, Lower -9 Support Tube, Aft Firewall (right side only) - Filter Frame Assembly, Ram Air (inc. items,9 & ) 0- Rod, Filter Support 9- Plate, Side Seal - Seal, Filter 4 - Doubler, Side Seal Closure Plate BA-409E Filter (Brackett) - Aft Firewall Assy. (inc. items,,-9,9 & 9) - Plate, Aft Firewall, Upper - Plate, Aft Firewall, Lower - Band, Aft Firewall, Upper -4 Band, Aft Firewall, Lower - Angle, Band Atttach Screen, Alternate Air 9 8- Doubler, Alternate Air Screen Plate, Splice Firewall 4 - Plate, Plenum Seal (left side) 4 0- Seal, Plenum (left side) 4 - Plate, Plenum Mid Seal (left side) - Seal, Plenum Mid (left side) 4 - Plate, Plenum Mid Seal (right side) 4 - Seal, Plenum Mid (right side) 4 - Plate, Plenum Seal (right side) Seal, Plenum (right side) - Bushing, Forward 0 - Support Strap, Forward Plenum Bulkhead Clamp, Aft Firewall Support - Bushing, Aft Firewall Support 4-4 Door, Alt. Air Intake Assy.(inc. items 4-,98,99&) 4 8- Seal, Alternate Air Intake - Door, Alternate Air Intake 9- Torque Tube Assembly, Alternate Air Intake - Bracket, Alternate Air Intake 8 - Bracket, Alternate Air Intake 9 - Bracket, Alternate Air Intake 0 - Link, Alternate Air Intake - Bushing, Alternate Air Intake L--8 Cable Assy., Red Handle, Alt. Air Intake (Tuthill Corp.) 00- Bracket Assembly, Cable Attach - Clamp Assemby, Cable Attach AN48-4 Clevis MS9-C Clevis Pin MS- Cotter Pin 8 AN4-A Bolt 9 - Placard Power Plant Group - Page 4 (AT- 0B) Date: / * * * denotes item used when Fan Brake or Ferry Radio Pack are installed 0 0- Plate, Cable Attach MS89-4 Grommet TY-M Strap, Self Locking (Tyrap) 40- Stud (Camloc) 4 4-G Grommet (Camloc) 40 Snap Ring (Camloc) 40R- Receptacle (Camloc) MS40AD Rivet, Solid Universal Head as reqd 8 MS4AD4 Rivet, Solid Flat Head as reqd 9 NAS80A Nut Plate Screw, Stainless Truss Head: ANCR8 4 AN- Washer, Flat MS4AD Rivet, Solid Flat Head as reqd AN-A Bolt AN- Nut, Self Locking 4 MS40AD4 Rivet, Solid Universal Head as reqd 8 MS9-C Screw Screw, Stainless Truss Head: ANCR Screw, Stainless Truss Head: ANCR 4 89 AN-8 Washer, Flat AN- Nut, Self Locking Cockpit Floor (ref) 0 9 AN-4A Bolt 9 MS-9 Lockwasher 9 MS40A0 Rivet, Solid Universal Head as reqd 94 NAS80A08 Nut Plate 9 0-AR Screw, Stainless Truss Head: ANCRAR 4 9 AN-4 Washer, Large Area 9 0- Screw, Stainless Truss Head: ANCR 98 ANC Washer, Flat Stainless as reqd 99 MS4C Nut, Self Locking Stainless Screw, Stainless Truss Head: ANCR4 4 AN-L Washer, Flat Light as reqd AN-4R Nut, Jam AN4-A Bolt 4 AN-4 Washer, Flat 8 AN-4 Nut, Self Locking ANCA Bolt, Stainless 4 AN-A Bolt 4 8 AN- Washer, Flat as reqd 9 AN-4 Nut Self Locking 4 AN4-4A Bolt AN4-4A Bolt AN4B-A Eyebolt AN4B-A Eyebolt 9 8 9

6 Power Plant Group - Page (AT-0B) Date: 08/

7 POWER PLANT GROUP - Figure. Filter Box Engine Air Induction System Installation (in lieu of Ram Air Induction System) 0- Forward Firewall Assy (inc. items -,, & ) 0- Plate, Lower Forward Firewall 00- Band, Firewall 4 0- Plate, Upper Forward Firewall 00- Angle, Band Attach Mid Firewall Assy (inc. items,, -9,, & ) 094- Plate, Lower Mid Firewall Plate, Upper Mid Firewall Band, Firewall 004- Aft Firewall Assy (inc. items,,9,-,, & ) 094- Plate, Lower Aft Firewall 094- Plate, Upper Aft Firewall 04- Duct Tape Plate, Plenum Seal Aft Firewall 09- Plate, Plenum Seal Aft Firewall 094- Plate, Plenum Seal Aft Firewall /8 x x Seal, Neoprene as reqd 00- Forward Plenum Cover Assy (inc. items, & 8) 0- Cover Half 00- Aft Plenum Cover Assy (inc. items - & 8) 0- Cover Half 400 Fastener (Mak-A-Clamp) Strap Airscoop Assembly (inc. items - 0 & - ) 04- Airscoop Weld Assembly 089- Angle, Airscoop 088- Frame, Weld Assembly 09- Screen, Intake 0- Strap, Screen 0 0- Strap, Screen 0- Airscoop Adapter Weld Assembly 04- Filter Box Assy(inc. items -4,4,-,- & -80) 04- Frame Weld Assembly 04- Angle Angle 0- Corner Assembly 4 9- Wedge Assembly Forward End, Filter Box Duct Tube Aft End, Filter Box 4 0- Plate Nut Plate Forward Support Assembly 09- Clamp Assembly Clamp Assembly Aft Support Assembly Clamp Assembly Clamp Assembly 04- Skin 0 P4 Air Filter (Donaldson) (alt: Donaldson) - Doubler, Filter Box Blower Support 0- Weld Assembly, Blast Air Hose Fitting 9T Mesh Disk (McMaster Carr) 4 0 H Clamp, Worm Drive (Breeze) - Hose, Blast Air (filter box to engine) - Bracket, Ejector Tube Support - Cushion, Header Tank Attach Duct Tube 9 0- Band Fastener (Mak-A-Clamp) 0- Screw, Stainless Truss Head: ANCR AN-8 Washer, Flat AN- Nut, Self Locking MS40AD4 Rivet, Solid Universal Head as reqd 40R- Receptacle, Camloc 40-AR Stud, Camloc (length as required) 4-G Grommet, Camloc 8 40 Snap Ring, Camloc 9 MS4AD4 Rivet, Solid Flat Head as reqd 0 AN- Washer, Flat AN- Nut, Self Locking 9 AN-A Bolt 4 Power Plant Group - Page (AT- 0B) Date: / AN4-A Bolt 4 AN-4 Washer, Flat AN-4 Nut, Self Locking AN-A Bolt 9 AN-L Washer, Flat Light 8 AN- Washer, Flat Large Area 4 9 ANC Nut, Jam Bolt Screw, Stainless Flat Head: AN0CR Screw, Stainless Truss Head: ANCR Screw, Stainless Truss Head: ANCR AN-4A Bolt AN-A Bolt 8 TY-M Strap, Self Locking (Tyap) 8 MS40AD Rivet, Solid Universlal Head as reqd

8 Power Plant Group - Page (AT-0B) Date: 8/,8,8 8,,, , ,8,88,8 9, ,,80 4,8 4 40,, , 8 4,88 4,88,, ,, ,, ,8 4,9 8,8 9,,,8,8,,

9 POWER PLANT GROUP - Figure 4. Engine Cowling Installation - Top Cowl Assembly ( includes items - 8, & - 88) - Skin, Top Cowl (left side) - Skin, Top Cowl (right side) 4 - Channel, Top Cowl (center) - Channel, Top Cowl (edge) - Flange, Top Cowl (left side) - Flange, Top Cowl (right side) 8 - Access Door Install Kit(inc. items 9-,,-8&9) 9 - Doubler, Access Door 0- Door, Access - Hinge 08- Placard - Pull Handle, Top Cowl Plate, Top Cowl Reinforcement 09- Top Cowl Support Structure Assembly (left side) 09- Top Cowl Support Structure Assembly (right side) 09- Plate, Bottom Cowl Reinforcement 09- Corner Skin Support Assembly (left side) 09- Corner Skin Support Assembly (right side) - Cowl Side Skin Assy.(left side inc. items -,-8) - Skin, Side Cowl (left side) - Flange, Side Cowl (left side) 9- Doubler - Cowl Side Skin Assy.(right side inc. items -,-8) - Skin, Side Cowl (right side) - Flange, Side Cowl (right side) 40- Doubler - Airscoop - Circuit Breaker Kit(inc. items,0-,,-8&9) 0 4- Doubler, Access Door - Door, Circuit Breaker Access - Placard, Access Door - Corner Skin Assy. (left side inc. items -,,8& 8) - Skin, Corner Cowl (left side) - Flange, Corner Cowl (left side) 0- Doubler - Corner Skin Assy. (right side inc. items 8,9,,8&8) 8 - Skin, Corner Cowl (right side) 9 - Flange, Corner Cowl (right side) Lower Cowl Aft Skin Assy. (inc. items 4, 4, - 8) Skin, Aft Lower Cowl Plate, Reinforcement 4 9- Lower Cowl Main Skin Assy.(inc items -48,-9&9) 0- Plate 4 9- Skin, Main Lower Cowl Hat Section Doubler, Reinforcement Doubler, Reinforcement (for Filter Box only) Placard - NACA Duct Assy. (inc. items 0-,-,8,88&94-9) 0 - Plate, NACA Duct 09A NACA Inlet (Prescott Products) 09- Retainer, NACA Duct - Screen, NACA Duct 4 0 H Clamp, Cushioned (Breeze) -4 Hose to AC Compresser - Firewall Assembly (inc. items -9,,8&88) 0- Doubler, Firewall Doubler, Firewall 9 0- Doubler, Firewall Flange, Top Cowl 04- Flange, Bottom Cowl 0- Upper Nose Cowl - Lower Nose Cowl, Ram Air Inlet 0- Plate, Nose Cowl Splice * * * denotes items used when Filter Box is installed in lieu of Ram Air System * 4- Lower Nose Cowl, Filter Box Power Plant Group - Page 8 (AT- 0B) Date: / Filter Box Installation only * 08- Lower Nose Cowl Main Skin Assy * 04- Plate, Lower Skin Splice *8 08- Skin, Main Lower Cowl *9 0- Lower Cowl Forward Skin Assy.(inc. items 0&-) *0 0- Skin, Lower Cowl Forward /8 x / Cork Cork Tape, Chafe Stripping as reqd 0- Screw, Stainless Truss Head (ANCR8) 4 0- Screw, Stainless Truss Head (ANCR) 8 4 AN4-A Bolt 4 AN-4 Washer, Flat AN-4 Nut, Self Locking AN-R Screw, Washer Head 8 AN- Washer. Flat 9 AN- Nut, Self Locking 4 80 AN4-A Bolt 8 NAS80A Nutplate 40 40R- Receptacle (Camloc) as reqd,8, AR Stud (Camloc) as reqd 4-G Grommet (Camloc) as reqd 40 Snap Ring (Camloc) as reqd 8 MS40AD4 Rivet, Solid Universal Head as reqd 8 MS4AD4 Rivet, Solid Flat Head as reqd 88 MS40AD Rivet, Solid Universal Head as reqd 89 9 Eyebolt (MSC) ANC4 Washer, Stainless Flat 9 MS4C4 Nut, Stainless Self Locking Fastener (Camloc) 9 MS4AD Rivet, Solid Flat Head 94 AN-L Washer, Light Flat 8 9 MS4C0 Nut, Stainless 8 9 MS9-C Screw 8 9 ANC4 Washer

10 Corner Skin (ref) F Forward Engine Firewall (ref) Corner Skin right side (ref) Power Plant Group - Page 9 (AT-0B) Date: /

11 POWER PLANT GROUP - Figure. Breather Adapter, Fuel Pump, Engine Wash and Engine Drains Installations - Drain Collector Weld Assembly 0 48H Clamp, Cushioned (Aeroseal) 8- Bracket 4 MSDG Clamp, Cushioned x 4 x Bushing (Weatherhead) x Plug (Weatherhead) x Hex Nipple (Weatherhead) 8 MS89-4 Grommet 9 00 x Coupling (Weatherhead) CCA- Valve 8- Hose - Tee Assembly 0- Tube 4 0- Chafe Tube as reqd 0- Tube Assy., LD drain (inc. items -) 0- Tube AN8-D Nut AN8-D Sleeve 04-8 Tube 0- Chafe Tube x 4 Tee (Weatherhead) 0- Tube Assembly 04- Tube 0-4 Chafe Tube 0- Hose 0-8 Tube Assembly (inc. items - ) Tube AN8-4D Sleeve AN8-4D Nut 0 AN-4D Fitting MS8/-4 O Ring 04- Tube 8 x 4 Adapter MSA Swivel Elbow 0- Tube Assembly, FD drain(inc. items - 8) 04- Tube Assy. Fd drain(filter Box only inc. items,8&4) 0- Tube AN8-D Nut 8 AN8-D Sleeve (alt: MA8-0) 9 MS89- Grommet Tube Assy., FDIA drain (inc. items,8 & 4- ) 4 0- Tube 4 AN- Union, Flared Tube Bulkhead 4 AN9- Nut, Bulkhead Union 04- Tube 4 04 Clamp (Aeroseal) 4 0- Hose 4 - Tube Assembly 48 MSDG8 Clamp, Cushioned 009- Fuel Pump Assy.(inc. items & 0-) 0 - Fuel Pump x x Bushing, Thread Reducer (Weatherhead) 00- Elbow, 00 x Elbow, (Weatherhead) 4 0- Restrictor --8S Elbow, (Stratoflex) - Hose Assy.(to fuel pump gauge) - Hose Assy.(fuel pump outlet to engine F) 8 - Hose Assy.(firewall fuel filter to engine fuel pump) Engine Wash Fitting Assembly 0 - Sleeve Modification 00- Hose, Flexible (Ram Air only) 00- Hose, Flexible (Filter Box only) 0 08H Clamp, Hose (Breeze) Engine Wash Bulkhead Fitting Assembly 00- Hose, Flexible (Ram Air only) 00- Hose, Flexible (Filter Box only) AN-8D Hose, Elbow, (Ram Air only) AN4-8D Hose, Elbow, (Filter Box only) 09- Fitting, Engine Wash x x 4 Bushing, Thread Reducer (Weatherhead) 8 MS-D Elbow, 4º 9 AN9-D Cap, Flared Tube Fitting Power Plant Group - Page (AT- 0B) Date: / FD combustion drain 8 LD FD4 4,8 9, Breather Adapter 8- Gasket (Pratt & Whitney) 00- Hose, Flexible MSDG Clamp, Cushioned 4 0 H Hose Clamp (Breeze) 09- Breather Tube MS89- Grommet MS99C Safety Wire as reqd 8 TYM Strap, Self Locking (alt: TYM) as reqd 9 AN-A Bolt 80 AN- Washer, Flat 4 AN- Nut, Self Locking 4 0- Screw, Stainless Truss Head (ANCR8) AN-A Bolt MS40AD4 Rivet, Solid Universal Head 0- Screw, Stainless Truss Head 4 8 AN- Nut, Self Locking 4 8 MS99C Safety Wire as reqd Screw, Stainless Truss Head (ANCR) 89 MSDG Clamp, Cushioned - Switch-Delta P (Dwyer) Tube Tube 9 9 x 4 Elbow (Weatherhead) 94 AN-4 Washer 9 MS99C Safety Wire as reqd 40 4,8 FDA 8 4 4, SD 8 48, 4 4 0,

12 Fuel Tube Vent CX Fuel Pump Inlet Power Plant Group - Page (AT-0B) Date: / Continued on Power Plant, Figure ,

13 POWER PLANT GROUP - Figure. Engine Fuel System Installation 0- Header Tank Assembly 08- Strap, Header Tank Support - Cushioning Strip 4 - Cushioning Strip - Hose Assembly (header tank to wing tank) 00- Fuel Tank Strainer Fitting CCA-0 Drain Valve 8 MS-8 Elbow, º 9 MS89- Grommet x x 4 Bushing, Pipe Tread Reducer CCA-00 Drain Valve x 8 x Bushing, Pipe Thread Reducer (Weatherhead) AN-8 Nipple Hose Assembly (header tank to fuel boost pump) - Handle Assembly, Fuel Valve (includes items - ) 09- Marking MS89-4 Grommet 0- Shaft 094- Coupling Weld Assembly - Extension, Coupling 040- Coupling PVC-/4 Polyvinyl Tubing (/4 dia.) 48- Bracket, Fuel Valve Mounting - AVI Fuel Valve Assembly (includes items - ) MS99C Safety Wire as reqd Coupling AN9-8D Pressure Seal - Hose Assembly (fuel valve to fuel boost pump) - Hose Assembly (fuel valve to firewall) Hose Assembly (fuel valve drain) --4S Elbow, (Stratoflex) B - /8 Bulkhead Fitting (Stratoflex) CCA- Drain Valve (Curtis) 0- Plate, Fuel Boost Pump Support Assy-Fuel Boost Pump Motor & Pump, Fuel Boost Pump SP8 O-Ring, Fuel Filter x x Bushing (Weatherhead) 8 --8S Elbow, (Stratoflex) Hose Plug Assembly Wire Assembly 4 9 x 4 Elbow, (Weatherford) 4 9- Tube, Boost Pump Drain MS89- Grommet 4-8 Fuel Filter Assembly 4 - Fuel Filter Element Assembly Plate, Fuel Filter Support S Adapter (Stratoflex) - Hose Assembly (fuel filter to firewall) 0 AN-8 Union, Flared Tube Bulkhead 00-4 Elbow - Hose Assembly (fuel filter to fuel pump inlet) --4S Elbow, 4º 4 - Hose Assembly (fuel filter to pressure switch) EIS-R-VAC Switch, Fuel Pressure AN-4 Nipple Adapter, Flared Tube and Pipe Thread 0- Bracket, Fuel Pressure Switch 8 x 4 Elbow (Weatherford) 9 - Hose Assembly 0 AN-4 Union, Flared Tube Bulkhead 0- Tube Assembly (start control dump) 0- Chafe Tube x 4 Union (Weatherford) 048- Tee Assembly (start control dump) 0 08H Clamp, Worm Drive Hose Fuel Tank Vent Connect 00- Hose, Vent Connect 8 0- Tube, Vent Connect 9 MSDG8 Clamp, Cushioned 0 AN-A Bolt AN- Washer, Flat as reqd AN- Nut, Self Locking Belly Skin (Ref) 0 MS4C Nut, Stainless Self Locking 4 ANC Washer, Stainless Flat 4 ANCA Bolt, Stainless 9A999 Roll Pin (McMaster-Carr) 9A4 Roll Pin (McMaster-Carr) 8 MS99C Safety Wire as reqd 9 MS9-8 Crush Washer 80 AN-4A Bolt MS8-4 Lockwasher 0- Screw, Stainless Truss Head: ANCR8 TY-M Strap, Self Locking (Tyrap) TY-M Strap, Self Locking (Tyrap) TY-M Strap, Self Locking (Tyrap) as reqd 8 AN4-4A Bolt 4 8 / x /4x/ Washer 4 88 MS89- Grommet Bushing 4 AN-4 Washer, Flat 9 AN-4 Nut, Self Locking 9 AN4-A Screw 9 AN4-A Screw 94 AN- Washer, Flat 9 AN9-8 Nut 9 AN4-A Bolt 9 AN4-A Eyebolt Clip Nut (Monadnock) 99 AN-A Bolt 0 AN- Washer, Flat AN-4 Nut, Self Locking AN- Washer, Flat AN9-4 Nut, Self Locking AN-A Bolt 4 AN-4A Bolt AN- Washer, Large Area Flat A /- Pipe Plug, Brass (ETA)(SBS P/N 408) 8 9- Modification - Screw 0 Power Plant Group - Page (AT- 0B) Date: /

14 8 Low Pressure Torque AC 9 0 High Pressure Torque AD Oil Pressure LPI Hopper Window Pitot Line Static Line 4- (Ref) 8 0, 4 High Pressure Torque Low Pressure Torque Oil Pressure 8 4 Fuel Pressure 4, 8 Fuel Dump FD4 Power Plant Group - Page (AT- 0B) Date: / Fuel Pump Pressure Gauge Restrictor 9 Continued on Power Plant Figure

15 POWER PLANT GROUP - Figure. Instruments Installation 9- Support, Instrument Panel (left side) 9- Support, Instrument Panel (right side) - Angle, Instrument Panel Support Trim Molding 04- Restrictor AS9- O Ring -9 Hose Assembly, High Pressure (firewall to AD port) 8-9 Hose Assembly, Low Pressure (firewall to AC port) 9-8 Hose Assembly, Oil Pressure (firewall to LPI port) - Hose Assy, Fuel Pressure (firewall to fuel pump gauge) 8- Hose Assembly, Fuel Dump (firewall to FD4 port) MSDG Clamp, Cushioned - Placard S Bulkhead Elbow (includes nut) (Stratoflex) 4 AN- Washer, Flat AN-4 Union AN9-4 Nut, Self Locking 0-8 Tube Assembly 4 - Placard as reqd 0- Pressure Switch (Hobbs) 00 x Coupling (Weatherford) x 4 Male Branch Tee (Weatherhead) x 4 Coupling Union (Weatherhead) 0 x Insert (Weatherhead) PTF-4A Tube (Parker Hannnifin) as reqd 0- Placard as reqd PTF-4A Tube (Parker Hannifin) (.0 ) PTF-4A Tube (Parker Hannifin) (40.0 ) 000- PTF-4A Tube (Parker Hannifin) (.0 ) 0 x 4 Tee (Weatherhead) 04- Tube 04-4 Tube x 4 Tee (Weatherhead) x Plug (Weatherhead) - Doubler, Static Air 0- Button, Static Air 0- Angle, Static Air Placard - Static Air - Keep Clean 9 40R- Receptacle (Camloc) AR Stud (length as required) (Camloc) G Grommet (Monadnock) Snap Ring (Camloc) Screw, Stainless Flat Head: AN0CR Screw, Stainless Truss Head: ANCR Screw, Stainless Truss Head: ANCR 4 AN- Washer, Flat as reqd 4 ANC Washer, Stainless Flat as reqd 48 AN- Nut, Self Locking 8 MS4C Nut, Stainless Self Locking 0 AN- Nut, Self Locking (Tensile) 0- Screw, Stainless Truss Head: ANCR8 AN-8 Washer, Flat as reqd AN4-CA Bolt, Stainless 4 AN-4 Washer, Flat TY-M Strap, Self Locking (Tyrap) (alternate: TY-M) as reqd MS4AD Rivet, Solid Flat Head MS40AD Rivet, Solid Universal Head 8 MS40AD4 Rivet, Solid Universal Head 9 MS4AD4 Rivet, Solid Flat Head Restrictor 00- PTF-4A 0- Chafe Tube as reqd 4- Bracket MS-0 Nutplate - Manifold MS- Screw 8 x 4 Connector (Weatherhead/Eaton) Power Plant Group - Page 4 (AT- 0B) Date: /

407AC-110-3, REV. D ITEM # P/N DESCRIPTION QTY TYP 0 407AC-110-3, REV. D AIR CONDITIONER INSTALLATION 1 KIT

Bill of Materials *407AC-110-3, REV. D ITEM # P/N DESCRIPTION QTY TYP 0 *407AC-110-3, REV. D AIR CONDITIONER INSTALLATION 1 KIT 2 407AC-210-1 CONDENSER INSTALLATION 1 KIT 3 407AC-310-3 COMPRESSOR INSTALLATION