Section NV-1. Non-Leveling Track Frame - Frame and Covers. Non-Leveling Track Frame - Frame and Covers
|
|
|
- Charleen Barrett
- 5 years ago
- Views:
Transcription
1 Section NV-1 Non-Leveling Track Frame - Frame and Covers Non-Leveling Track Frame - Frame and Covers
2 Last Updated - 09/2008 Non-Leveling Track Frame - Frame and Covers NV-1-1
3 Non-Leveling Track Frame - Frame and Covers Last Updated - 09/2008 MAIN PAGE HEADING Frame (Page Sub-Heading) and Covers (General) (Used on machines PDN# 000FWD and above) REF PART # QTY DESCRIPTION SEE SEE SECTION PAGE NV 1 CARBODY, TRACK MACHINE - Narrow NV 1 CARBODY, TRACK MACHINE - Wide NV 1 LID, TRUNK NON-LEVEL T/M - Narrow NV 1 LID, TRUNK NON-LEVEL T/M - Wide NV 4 BOLT -.5 X NV 8 WASHER, SAE flat - 1/ NV 1 HINGE, ASSEMBLY-N/L T/M TRUNK L.H NV 2 BOLT -.5 X NV 1 HINGE, ASSEMBLY-N/L T/M TRUNK R.H NV 1 PLATE, COVER BOTTOM (following parts listed below need to fitted and welded after installtion) NV 1 SHAFT, COVER PIVOT NV 1 WASHER, PIVOT STOP NV 5 WASHER, SAE FLAT NV 5 BOLT X NV 3 NUT, LOCK NV 1 BOLT -.5 X NV 2 WASHER, SAE flat - 1/ NV 1 ROD, PROP - NON-LEVELING TRUNK-CURRENT NV 1 ANGLE, PROP ROD - NON-LEVELING TRUNK-CUR NV 2 WASHER, SAE FLAT NV 2 BOLT X NV 1 NUT, LOCK -.5 NV-1-2
4 Last Updated - 09/2008 Non-Leveling Track Frame - Frame and Covers NV-1-3
5 Non-Leveling Track Frame - Frame and Covers Last Updated - 09/2008 MAIN PAGE HEADING Frame (Page Sub-Heading) Installation (Used on machines PDN# 000FWD and above) REF PART # QTY DESCRIPTION SEE SEE SECTION PAGE NV 24 BOLT - 30MM-3.5 X 140MM 12.9 (Torque to 1000 ft lbs Nm) NV 24 SPACER, BOLT - CARBODY 3 REF. 1 FRONT FRAME WELDMENT.... NV-1 4 REF. 1 TRACK FRAME ASSEMBLY... TS COVER, Track Frame COVER, Track Frame NV 4 WASHER, SAE FLAT NV 4 BOLT - 12MM-1.75P X 40MM See referenced page for component or assembly breakdown. NV-1-4
6 Last Updated - 09/2008 Non-Leveling Track Frame - Frame and Covers THIS PAGE LEFT BLANK FOR NOTES NV-1-5
7 Section NV-2 Non-Leveling Frame - Hydraulics
8 NV-2-1
9 MAIN PAGE HEADING RIGHT (Page DRIVE Sub-Heading) MOTOR LINES (Rotory Manifold to Right Drive Motor) (Used on machines PDN# 000FWD and above) REF PART # QTY DESCRIPTION SEE SECTION 1 REF. 1 ROTORY MANIFOLD... UP NV 2 CONNECTOR, STR - FF1852T-1616S 3 -NV 1 HOSE ASSEMBLY S-1604 (bulkhead to rotary manifold #9) 4 -NV 1 HOSE ASSEMBLY S-1604 (bulkhead to rotary manifold #11) NV 2 ELBOW, BULKHEAD #16 UNION 6 -NV 1 HOSE ASSEMBLY S-1609 (bulkhead plate to drive motor) 7 -NV 1 HOSE ASSEMBLY S-1609 (bulkhead plate to drive motor NV 2 ADAPTER, 90 FLANGE - FF S NV 2 KIT, SPLIT FLANGE - 1 (CODE 62) NV 4 BOLT - 12MM-1.75P X 40MM NV 4 WASHER, FLAT - 12MM NV 4 BOLT - 12MM-1.75P X 40MM NV 2 O-RING - 1 SF (CODE 61/62) 13 REF 1 TRACK DRIVE MOTOR... TS-1 14 REF 1 BULKHEAD BRACKET - Non-Leveling Frame... NV-1 See referenced page for component or assembly breakdown. NV-2-2
10 NV-2-3
11 MAIN PAGE HEADING LEFT (Page DRIVE Sub-Heading) MOTOR LINES (Rotory Manifold to Right Drive Motor) (Used on machines PDN# 000FWD and above) REF PART # QTY DESCRIPTION SEE SECTION 1 REF. 1 ROTORY MANIFOLD... UP NV 2 CONNECTOR, STR - FF1852T-1616S 3 -NV 1 HOSE ASSEMBLY S-1604 (bulkhead to rotary manifold #10) 4 -NV 1 HOSE ASSEMBLY S-1604 (bulkhead to rotary manifold #12) NV 2 ELBOW, BULKHEAD #16 UNION 6 -NV 1 HOSE ASSEMBLY S-1609 (bulkhead plate to drive motor) 7 -NV 1 HOSE ASSEMBLY S-1609 (bulkhead plate to drive motor NV 2 ADAPTER, 90 FLANGE - FF S NV 2 KIT, SPLIT FLANGE - 1 (CODE 62) NV 4 BOLT - 12MM-1.75P X 40MM NV 4 WASHER, FLAT - 12MM NV 4 BOLT - 12MM-1.75P X 40MM NV 2 O-RING - 1 SF (CODE 61/62) 13 REF 1 TRACK DRIVE MOTOR... TS-1 14 REF 1 BULKHEAD BRACKET - Non-Leveling Frame... NV-1 See referenced page for component or assembly breakdown. NV-2-4
12 NV-2-5
13 MAIN PAGE HEADING MOTOR (Page Sub-Heading) CASE DRAIN (Rotary Manifold to Drive Motor Case Drains) (Used on machines PDN# 000FWD and above) REF PART # QTY DESCRIPTION SEE SECTION 1 REF. 1 ROTORY MANIFOLD... UP NV 1 ELBOW, 90 - FF1868T-0812S 3 -NV 1 HOSE ASSEMBLY S-0804-W (bulkhead tee to rotary manifold port V1) NV 1 TEE, BULKHEAD BRANCH NV 1 HOSE ASSEMBLY S-0809-W (bulkhead tee to motor) 6 -NV HOSE ASSEMBLY S-0809-W (bulkhead tee to motor) 7 REF BULKHEAD PLATE... NV NV 2 ELBOW, 90 SWIVEL - FF2098T-0808S NV 2 CONNECTOR, MALE ISO REF 2 TRACK DRIVE MOTOR... TS-1 See referenced page for component or assembly breakdown. NV-2-6
14 NV-2-7
15 MAIN PAGE HEADING PARKING (Page Sub-Heading) BRAKE (Rotary Manifold to Track Parking Brake) (Used on machines PDN# 000FWD and above) REF PART # QTY DESCRIPTION SEE SECTION 1 REF. 1 ROTORY MANIFOLD... UP NV 1 ELBOW, 90 - FF1868T-0606S 3 -NV 1 HOSE ASSEMBLY S-060S-W (bulkhead tee to rotary manifold port 7) NV 1 BULKHEAD, BRANCH TEE NV 1 HOSE ASSEMBLY S-0609-W (bulkhead tee to brake) 6 -NV HOSE ASSEMBLY S-0609-W (bulkhead tee to brake) 7 REF BULKHEAD PLATE... NV NV 2 FITTING, MALE CONNECTOR ISO REF 2 TRACK DRIVE MOTOR... TS-1 See referenced page for component or assembly breakdown. NV-2-8
16 NV-2-9
17 MAIN PAGE HEADING Motor (Page Flushing Sub-Heading) Return (Rotary Manifold to Track Motor Flushing Return) (Used on machines PDN# 000FWD and above) REF PART # QTY DESCRIPTION SEE SECTION 1 REF. 1 ROTORY MANIFOLD... UP NV 1 ELBOW, 90 - FF1868T-0606S 3 -NV 1 HOSE ASSEMBLY S-060S-W (bulkhead tee to rotary manifold port 1) NV 1 BULKHEAD, BRANCH TEE NV 1 HOSE ASSEMBLY S-0609-W (bulkhead tee to motor) 6 -NV HOSE ASSEMBLY S-0609-W (bulkhead tee to motor) 7 REF BULKHEAD PLATE... NV NV 2 CONNECTOR, STR - FF1852T-0606S 9 REF 2 TRACK DRIVE MOTOR... TS NV 2 FITTING, FLUSHING ORIFICE - TRACK MOTOR See referenced page for component or assembly breakdown. NV-2-10
18 NV-2-11
19 MAIN PAGE HEADING Track (Page Sub-Heading) Motor Shift (Rotary Manifold to Track Motor Shift) (Used on machines PDN# 000FWD and above) REF PART # QTY DESCRIPTION SEE SECTION 1 REF. 1 ROTORY MANIFOLD... UP NV 1 ELBOW, 90 - FF1868T-0404S 3 -NV 1 HOSE ASSEMBLY S-0409-W (bulkhead tee to rotary manifold port 3) NV 1 BULKHEAD, BRANCH TEE NV 1 HOSE ASSEMBLY S-0404-W (bulkhead tee to motor) 6 -NV HOSE ASSEMBLY S-0404-W (bulkhead tee to motor) 7 REF BULKHEAD PLATE... NV NV 2 ELBOW, 90 SWIVEL REF 2 TRACK DRIVE MOTOR... TS NV 2 CONNECTOR, STR - FF1852T-0406S See referenced page for component or assembly breakdown. NV-2-12
20 THIS PAGE LEFT BLANK FOR NOTES NV-2-13
21 Section NV-3 Non-Leveling Frame - Fuel Tank Components Non-Leveling Frame - Fuel Tank Components
22 Non-Leveling Frame - Fuel Tank Components NV-3-1
23 Non-Leveling Frame - Fuel Tank Components MAIN PAGE HEADING FUEL FILL (Page STRAINER Sub-Heading) INSTALLATION (Used on machines PDN# 000FWD and above) REF PART # QTY DESCRIPTION SEE SEE SECTION PAGE 1 REF. 1 Non-LEVELING FRAME WELDMENT... NV NV 4 BOLT - 1/2 x NV 4 WASHER, SAE flat - 1/ NV 1 O-RING NV 1 COVER, fuel tank NV 1 CAP, FUEL - LOCKING NV 1 STRAINER, FUEL SYSTEM NV 1 RING, snap - fuel strainer retainer LV 1 CONNECTOR, STR - 1/2 X 3/8 FF-S NV 1 COVER, fuel tank LV 1 VALVE, CHECK - FUEL TANK (replaces 15652) NV 2 CONNECTOR, STR - FF1852T-0808S 13 -NV 1 HOSE ASSEMBLY S-08MP (Fuel supply NV 1 FILTER, screen 15 -NV 1 HOSE ASSEMBLY (Fuel return) See referenced page for component or assembly breakdown. NV-3-2
24 Non-Leveling Frame - Fuel Tank Components NV-3-3
25 Non-Leveling Frame - Fuel Tank Components MAIN PAGE HEADING FUEL (Page SUPPLY Sub-Heading) SYSTEM (Used on machines PDN# 000FWD and above) REF PART # QTY DESCRIPTION SEE SEE SECTION PAGE 1 REF. 1 Non-LEVELING FRAME WELDMENT... NV NV 1 ELBOW, TT-08X04 3 -NV 1 HOSE ASSEMBLY OS-04O4 (Fuel Vent to #2 Port RM) NV 1 CONNECTOR, STR REF. 1 ROTARY MANIFOLD... UP NV 2 CONNECTOR, STR - FF1852T-0606S 7 -NV 1 HOSE ASSEMBLY JS-06J9 (Fuel Filter outlet to RMFS) 8 -NV 1 HOSE ASSEMBLY JS-06J9 (RMFR to Fuel Tank Return) NV 2 BOLT X NV 4 WASHER, SAE flat - 3/ NV 1 BRACKET, FUEL PUMP/FILTER T/M NV 4 WASHER, SAE flat - 3/ NV 2 BOLT X NV 3 NUT, hex - 1/ NV 3 WASHER, SAE flat - 1/ NV 1 ELBOW, 90 6-JIC X 10-ORB NV 1 MOUNT, filter head NV 1 FILTER, spin-on fuel NV 1 ELBOW, 90 6-JIC X 10-ORB 20 -NV 1 HOSE ASSEMBLY JS-06JS (Fuel Pump to Fuel Filter Inlet) NV 1 ELBOW, FSO-6X NV 1 PUMP, fuel - 12 volt 23 -NV 1 HOSE ASSEMBLY JS-06J9 (Fuel Tank Supply to Pump Inlet) NV 1 ELBOW, TT-08X NV 1 HOSE ASSEMBLY S-04MJ (Fuel tank vent port to fuel vent breather) NV 1 BRACKET, disc saw gauge mount NV 1 BREATHER, fuel vent See referenced page for component or assembly breakdown. NV-3-4
26 Non-Leveling Frame - Fuel Tank Components THIS PAGE LEFT BLANK FOR NOTES NV-3-5
Section FF C Front Frame - Frame / Covers / Steps
Section FF-1 830800C & 840 Front Front Frame - - Frame Frame / Covers / Covers / Brackets / Steps / Steps 830C Front Frame - Frame / Covers / Steps Last Updated - 05/16 Front Frame - Frame / Covers / Steps
Section DH-1. Drive Hydraulics - Charge Pressure Circuit. Drive Hydraulics - Charge Pressure Circuit
Section DH-1 Drive Hydraulics - Charge Pressure Circuit Drive Hydraulics - Charge Pressure Circuit Last Updated - 04/15 Drive Hydraulics - Charge Pressure Circuit Parts T4022 4/15 25.00 700C Parts DH-R0
OC-1. Operator s Cab - Cab Weldment and Installation. Operator s Cab - Cab Weldment Components
OC-1 Operator s Cab - Cab Weldment and Installation Operator s Cab - Cab Weldment Components Last Updated - 01/15 Operator s Cab - Cab Weldment and Installation Parts T3976 02/15 12.5 OC-1-1 Operator s
OC-1. Operator s Cab - Cab Weldment and Installation. Operator s Cab - Cab Weldment Components
OC-1 Operator s Cab - Cab Weldment and Installation Operator s Cab - Cab Weldment Components Last Updated - 01/17 Operator s Cab - Cab Weldment and Installation Parts T4198 02/17 12.5 C-Series 765 Parts
Section UP-1 Upper Turntable - Structural Components, Doors, and Covers
Section UP-1 Upper Turntable - Structural Components, Doors, and Covers Structural Components - Upper Turntable Last Updated - 01/2016 Upper Turntable - Structural T4148 07-2016 9.375 765C Parts Module
Section TS-1. Track Systems / 765 Undercarriage. 755/765 Track Frames - Frame and Covers
Section TS-1 Track Systems - 755 / 765 Undercarriage - Frame and Covers Last Updated - 01/17 Track Systems - 755-765 Undercarriage Parts T4176 1/17 12.50 TS-3-1 Track Systems - 755-765 Undercarriage Last
Section UP-1 Upper Turntable - Structural Components, Doors, and Covers
Section UP-1 Upper Turntable - Structural Components, Doors, and Covers Structural Components - Upper Turntable Upper Turntable - Structural 700C Parts Module UP - R0 UP-1-1 Upper Turntable - Structural
10 PARTS LIST 10.1 Lift Assembly
10 PARTS LIST 10.1 Lift Assembly 30 10.2 Lift Assembly Parts List ITEM NO. QTY. DESCRIPTION PART NO. 1 1 DECK WELDMENT RHS 4-1091 1 DECK WELDMENT LHS 4-1090 2 54 BALL BEARING 6-2940 3 2 REAR SLIP PLATE
MidCap Rotary Rake. Illustrated Parts Breakdown
MidCap Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Main Frame Transport Wheel Assembly Lift Arm Assembly Main
Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No.
Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS Serial Number B30970200 & Higher Part No. 408920 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol
Section ES-1. Electrical System - Engine Compartment. Electrical System - Engine
Section ES-1 Electrical System - Engine Compartment Electrical System - Engine Last Updated - 03/17 Electrical System - Engine Compartment Parts T4204 03/17 12.5 Parts Module ES - R0 ES-1-1 Electrical
Section ES-1. Electrical System - Engine Compartment. Electrical System - Engine
Section ES-1 Electrical System - Engine Compartment Electrical System - Engine Last Updated - 03/15 Electrical System - Engine Compartment Parts T3997 03/15 12.5 Parts Module ES - R0 ES-1-1 Electrical
TT4100 Rotary Tedder
TT0 Rotary Tedder Serial numbers 0 and higher Illustrated Parts Breakdown Page Page Tongue Assembly S/N - Tongue Assembly S/N to Page Page Page Page Page Tongue Assembly S/N to Tongue Assembly S/N + Main
$1.50 $3.00 U.S. &adaptors chart
$.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance
TT8101 Rotary Tedder
TT0 Rotary Tedder Illustrated Parts Breakdown Page Front End Page Page Transport Axle Assembly Cylinder Linkage Page Guards Page Page Page Page Transport Lock Assembly Lift Frame Assembly Center Tunnel
FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC
FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200, TA1600 & TA2400 SPRAYERS Serial Number B26720100 & Higher Part No. 407525 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol identifies
Lime Spreader. Model SL6. Illustrated Parts Breakdown. Front Hydraulics Rear Hydraulics Manifold Components. Spinner Assembly
Lime Spreader Model SL Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Front Hydraulics Rear Hydraulics Manifold Components Floor & Apron Axle Assembly Apron Drive
TT6101 Rotary Tedder
TT0 Rotary Tedder 0/0/0 Illustrated Parts Breakdown Page Chassis Assembly Page Page Transport Axle Assembly S/N - Transport Axle Assembly S/N + Page Page Page Page Page Transport Lock Assembly Lift Frame
SELECTION GUIDE.
SELECTION GUIDE SUR-FIT CORPORATION www.sur-fitusa.com O-RING FACE SEAL FITTINGS Standard J1453 published by the Society of Automotive Engineers (SAE). FS0304-C SERIES (520112) FS0306 SERIES (520118) FS0318
COVER PLATES & ROLLERS
COVER PLATES & ROLLERS FOR MODELS - ALL 8/01 Item PartNumber Part Description Qty. 1 9017--104--35 Stop 2 2 62--108 3/8NC x 1 GD5 Cap Screw 2 3 62--425 3/8NC x 3/4 GD8 Hex Washer Thread Forming Screw 8
TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
Lime Spreader. Model SL6. Illustrated Parts Breakdown. Front Hydraulics Rear Hydraulics Manifold Components. Spinner Assembly
Lime Spreader Model SL Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Front Hydraulics Rear Hydraulics Manifold Components Floor & Apron Axle Assembly Apron Drive
TT4101 Rotary Tedder
TT Rotary Tedder 0//0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Tongue Assembly S/N S/N - Tongue Assembly S/N + Main Frame S/N - Main Frame S/N to Main Frame S/N
320 Series Models 325, 326, 327
0 Series Models,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and
PARTS MANUAL. HD4SR and 12SR Auto Align Bale Skoop to 2017 K
PARTS MANUAL 1998 to 2017 HD4SR and 12SR Auto Align Bale Skoop K34991-04 Table of Contents Section 1: Parts Breakdown...1-1 Bale Skoop Final Assembly... 1-2 Loader Assembly... 1-4 12SR - Grab Hook Assembly
Table Of Contents B & 735B
Table Of Contents Last Updated - 10/08 Table Of Contents... 725B & 735B SECTION DESCRIPTION PAGE UP Upper Turntable Components A.2 EE Electronic (Cummins) Engine A.3 OC Operator Cab Components A.3 ES Electrical
Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG
Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors 1 PARTS CATALOG TABLE OF CONTENTS Frame & Tractor Linkage...2,3 Header Linkage & Float Group...4,5 Header Drive Hydraulics
Mulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
72K850ZP PARTS MANUAL
7 2 K 8 5 0 Z P PARTS MANUAL 72 MID-CUT GAS ENGINE OPTION SECTION 72 MID-CUT DECK ASSEMBLY 72" Mid-Cut Deck Assembly # PART NO. QTY DESCRIPTION 1 582096 1 72" MC DECK WELDMENT 2 582098 1 72" DECK CHANNEL
DIAMOND CONCRETE SAW PARTS LIST MODEL CC8000 P R O D U C T S. (Revised )
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC8000 (Revised 10-15-2002) Table of Contents Page Saw Controls Legend. 3 Drawing 1. Frame Group. 4-5 Drawing 2. Arm Assembly... 6-7 Drawing 3. Hydraulics
CONTAINER GUIDE WELDMENTS
CONTAINER GUIDE WELDMENTS FOR MODELS - ALL FRONT LOAD CONTAINERS 4/98 1 9110--39--0 L.H. Container Guide Weldment 1 2 9110--38--0 R.H. Container Guide Weldment 1 3 9110--56--1 Instruction Sheet (Not Shown)
EAGLE TUGS. Transit Pro Option. Vehicle Types: TT-4, TT-5, TT-6, & TT-8 Engine Type: Wiscon Gas TME27 Engine Models QA023 REV
EAGLE TUGS Transit Pro Option Vehicle Types: TT-4, TT-5, TT-6, & TT-8 Engine Type: Wiscon Gas TME27 Engine Models QA023 REV00 10.20.09 QA023 REV01 04.18.11 HYDRAULIC ASSIST SYSTEM A-2 QA023 REV01 04.18.11
Ingersoll HYDRAULIC VACUUM HVFB, HVFC, AHVFC, AHVFB PARTS CATALOG HOME ATTACHMENTS
R Ingersoll HYDRAULIC VACUUM HVFB, HVFC, AHVFC, AHVFB PARTS CATALOG 8-3082 HOME ATTACHMENTS ALPHABETICAL INDEX Bags...13 Boot...9 Cover, Bags...13 Cover, Cart...11 Decals...19 Ducts...9 Housing, Blower...9
Parts Manual Contains:
Parts Manual Contains: M-0- REV. B JANUARY 009 Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns MAXON Lift Corp. 009 LIFT CORP. 9 Slauson Ave. Santa Fe Springs,
Bright Forklift. Parts Catalog. Tab Indexes
Tab Indexes Parts Catalog Bright Coop Inc. 803 W. Seale St. Nacogdoches, TX 75964 Phone (936) 564-8378 Fax (936) 564-3281 Info@brightcoop.com BCI# 097-20570 Updated 2/18/2014 Bright Forklift 1 2 3 4 5
ULTRABOND Methacrylate Adhesive Dispensing unit IMP-DUO Start-Up Instructions
ULTRABOND Methacrylate Adhesive Dispensing unit IMP-DUO-54646 Start-Up Instructions MAGNUM VENUS PLASTECH UltraBond Start-Up Instructions Rev. 5/07 START-UP INSTRUCTIONS 1. Attach main air supply to the
CALIFORNIA Proposition 65 Warning:
PARTS MANUAL P1064 For Models: L1064D, L1064A, M1064D, M1064T1, M1064T2, M1064A, M1064H, NL1064D, NL1064T1, NL1064T2, NL1064H1, NL1064H2, M40C2, M55C2, & M65C2 CALIFORNIA Proposition 65 Warning: Diesel
Lime Spreader. Model SL10. Illustrated Parts Breakdown. Hydraulic System Hydraulic Manifold. Twin Speed Reducer
Lime Spreader Model SL0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Hydraulic System Hydraulic Manifold Switch Box Floor & Apron Axle Assembly Apron Drive
Parts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GH200 Sprayer Models Sprayer Models GH30 GH200 GH230 GH300 20 Vac 60 Hz ETL/CSA/UL 20 Vac 60 Hz 253957 253959 253980 253962 253963 25398 255095 253965 253966 253982
EAGLE TUGS. Transit Pro Option. Vehicle Types: TT-4, TT-5, TT-6, & TT-8 Engine Type: Yanmar Diesel 4TNV98 Tier II & Tier III Engine Models
EAGLE TUGS Transit Pro Option Vehicle Types: TT-4, TT-5, TT-6, & TT-8 Engine Type: Yanmar Diesel 4TNV98 Tier II & Tier III Engine Models QA018 REV00 10.20.09 QA018 REV03 02.11.12 A-2 QA018 REV03 02.11.12
COMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit
09/97 CB-5C-050 Suggested Spare Parts for LB601 and LB601A Compressors: Part # Description Qty./ Unit Comm. Qty. 794099 Gasket Set - Buna-N, Aluminum T 1 1 1 794259 Suction Valve Sub-Assembly T 2 2 794279
ARO14/SMO14. Four Post Surface Mounted Lift Capacity 14,000 lbs. (7,000 lbs. per axle) Maximum Wheelbases of 212-1/2", 192-1/2" & 158-1/2"
ARO/SMO Four Post Surface Mounted Lift Capacity,000 lbs. (,000 lbs. per axle) Maximum Wheelbases of -/", -/" & -/" P A R T S B R E A K D O W N IMPORTANT: When ordering parts or requesting service always
2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER
0/0 This Manual applies to models 0 and 0 that use a blade pan which measures. blade hole center to blade hole center. Also blades measure 8. from hole center to blade tip. See Section if these dimensions
Marine Generators Marine Diesel Engines Land-Based Generators
P1066 For Models: L1066T, L1066A, L1066H, M1066T, M1066A1, M1066A2, M1066A3, M1066H, M1066TMCA, NL1066T, NL1066H1, NL1066H2, NL1066H3, NL1066H4, and M99C2 PARTS CATALOG Marine Generators Marine Diesel
DUAL TEDDER RAKE PARTS MANUAL
DUAL TEDDER RAKE PARTS MANUAL 2016 DUAL TEDDER PARTS MANUAL TABLE OF CONTENTS DESCRIPTION PAGE TABLE OF CONTENTS 1 DT-26300 DUAL TEDDER ASSEMBLY 2-3 DT-SI SITREX TEDDER INSTALLATION PARTS 4-5 DT-BE BRABER
Form 7-53, 11-15c Supersedes Form 7-53, 03-13c Sheet 1 of , Swing Air Jack Hunter Engineering Company
Form 7-53, 11-15c Sheet 1 of 8 133-84-1, 133-85-1 Swing Air Jack 2013-2016 Hunter Engineering Company 133-84-1, 133-85-1 Swing Air Jack REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING Form 7-53, 11-15c
AR123/SM123. Four Post Surface Mounted Lift Capacity 12,000 lbs. (6,000 lbs. per axle) Maximum Wheelbases of 206-1/2", 182-1/2" & 158-1/2"
AR/SM Four Post Surface Mounted Lift Capacity,000 lbs. (,000 lbs. per axle) Maximum Wheelbases of 0-/", -/" & -/" P A R T S B R E A K D O W N IMPORTANT: When ordering parts or requesting service always
PA47 Mk3 HEDGECUTTER / MOWER. Parts Manual. Publication 555 October 2008 Part No Revision:
Publication 555 October 2008 Part No. 41571.55 Revision: 17.03.09 PA47 Mk3 HEDGECUTTER / MOWER Parts Manual For best performance USE ONLY GENUINE SERVICE PARTS To be assured of the latest design improvements
COVER PLATES & ROLLERS
COVER PLATES & ROLLERS 9035-10 Revised 8/95 FOR MODELS - ALL 3/98 Item Part Number Part Description Qty. 1 9035--1--10 Top Cover Plate 1 2 62--425 3/8NC x 3/4 Hex Washer Thread Cutting Screw 8 3 62--544
SAFETY SPEED MANUFACTURING CO. INC Lincoln Street NE, Ham Lake, MN (800) DATE:
1 PH403 J-SeriesQ-Exhaust 1 2 PH412 Male Connector 1/4" - 1/8" NPT 1 3 * PH440 HOSE 10.5in 1 16 1 2 3 4 PH414 Bulkhead Union - 1/4" 1 5 PH240 CLAMP GAURD / SHROUD COMPLETE 1 17 4 6 PH 109 KNOB / FENCE
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
GSN-8 Spreader. Illustrated Parts Breakdown. Page 1 Front End Assembly Page 2 Axle Assembly Page 3 Floor & Apron Page 4 Pump Assembly
GSN- Spreader Illustrated Parts Breakdown Page Front End Assembly Page Axle Assembly Page Floor & Apron Page Pump Assembly Page Hydraulics Page Manifold Components Page Manifold Cover Page Gearbox Components
8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST
8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST 24 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY. DESCRIPTION PART # 1 24 FLAT WASHER, 1/2 ID SAE 6-0248 2 16 LOCKWASHER, 1/2 ID 6-0059 3 17 HEX NUT, 1/2-13UNC 6-0035
DRIVE TRAIN 300E-450 HP 19
DRIVE TRAIN 00E-0 HP SOLID STEEL CASING THIS SIDE 0 REV 0 X MOTOR A BOLT B BOLT GASKET, MOTOR TO GEAR CASE GASKET, MOTOR TO GEAR CASE TAPER PIN, GEAR CASE TO MOTOR 0 SLEEVE, SHAFT SEAL, SHAFT 0 O-RING
M REV. D DECEMBER Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns
M-07- REV. D DECEMBER 009 Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns MAXON Lift Corp. 009 LIFT CORP. 9 Slauson Ave. Santa Fe Springs,
Boxer 600HD Parts Manual
Phone: Sales - 800-81-002, Parts and Service - 800-2-889 www.boxerequipment.com BIG POWER IN ALL PLACES Boxer 600HD Parts Manual SN 1 and Higher Part No. 76-821 Manufactured by: Morbark, LLC. 807 S. Winn
PARTS BOOK 60 CUT SERIAL #24700+
PARTS BOOK SKID-STEER FORESTRY HEADS 60 CUT SERIAL #24700+ DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE
Cross Reference Listing of Caterpillar parts to Kress parts for Kress 200C II Coal Haulers (Serial Numbers HND-M096, HND-M097, & HND-M098)
Cross Reference Listing of Caterpillar parts to Kress parts for Kress 200C II Coal Haulers (Serial Numbers HND-M096, HND-M097, & HND-M098) 0300167 RING BACKUP 222457 323180 BOLT HX HD.50-13NC 1.62GR8 211343
3550 PARTS MANUAL TABLE OF CONTENTS 5 FRONT ENGINE FRAME ASSEMBLY 7 REAR ENGINE FRAME ASSEMBLY 9 FRONT GAUGE PANEL ASSEMBLY
3550 PARTS MANUAL 3/14/01 3550 PARTS MANUAL TABLE OF CONTENTS 1 CARRIAGE ASSEMBLY 3 ENGINE HOUSING ASSEMBLY 5 FRONT ENGINE FRAME ASSEMBLY 7 REAR ENGINE FRAME ASSEMBLY 9 FRONT GAUGE PANEL ASSEMBLY 11 FUEL
Snow Blower Assembly Standard Flow Starting Serial Number to Current High Flow Starting Serial Number to Current
Snow Blower Assembly - 01-1500 Standard Flow Starting Serial Number 06337 to Current High Flow Starting Serial Number 11136 to Current Snow Blower Decal list Label Letter Description QTY. A Warning Do
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL July, 0 ROTARY
PARTS BOOK 60 CUT SERIAL #23599+
PARTS BOOK SKID-STEER FORESTRY HEADS 60 CUT SERIAL #23599+ DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE
TWIN ROTARY RAKE PARTS BOOK MODEL
TWIN ROTARY RAKE PARTS BOOK MODEL 2650 17.01135 This parts book is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you. Issue Date:
Checked by Revised by
Illustrated Parts List for VMAC System V900114 2012-2010 25-3500 DODGE 4X4 Pickup & 3500 Cab & Chassis 6.7L Cummins Diesel System V900116 2012-2011 45-5500 Cab & Chassis 6.7L Cummins Diesel 1. Kit Pack
GS12 Grape Spreader. Illustrated Parts Breakdown
GS Grape Spreader Illustrated Parts Breakdown Page Front End Assembly Page Axle Assembly Page Floor & Apron Page Pump Assembly Page Page Hydraulics Manifold Components Page Gearbox Components S/N - Page
M MARCH 2002 Parts Manual Contains:
M-0- MARCH 00 Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns LIFT CORP. 9 Slauson Ave. Santa Fe Springs, CA. 900 CUSTOMER SERVICE: TELEPHONE
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE,
HT46X Rotary Tedder. Illustrated Parts Breakdown. Center Section
HTX Rotary Tedder Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Center Section Hydraulics Outer Wing Assembly Center Bolted Components Tine Rotor and Hardware Tilt
Litter Spreader. Models SP400, SP450, SP500, SP550. Illustrated Parts Breakdown
Litter Spreader Models SP00, SP0, SP00, SP0 Illustrated Parts Breakdown Page Front End Page Hydraulic System (w/ Side Mounted Reservoir) Page Hydraulic System (w/ Front Mounted Reservoir) Page Hydraulic
PARTS LIST GAS TILTING SKILLETS MODELS: ACGTS-30 ACGTS-40
PARTS LIST GAS TILTING SKILLETS MODELS: ACGTS-30 ACGTS-40 ACCUTEMP PRODUCTS, INC. 8415 North Clinton Park Dr. Fort Wayne, IN 46825 800 210-5907 Office 260 493-0415 Fax www.accutemp.net PART 10006R13 1
2-1. Power Unit. Power Unit Installation. Rev: 06/2018 B Page 1 of
2- Installation Rev: 0/208 B Page of Installation Item Part No. Qty Description Item Part No. Qty Description Installation * 58. Assembly 2 5. Vibration Dampener 3 YC-22. Capscrew 583 0. Washer 5 R38 5.
High Pressure Rotating Arch Parts List Jan. 12, 2017 Rev. A
46-804-00-BK Rotating High Pressure Arch with Turbo Nozzles 46-805-00-BK High Pressure Rotating Arch Rotating High Pressure Arch with V-Jet Nozzles 46-806-00-BK Rotating High Pressure Arch with Wheel Blaster
parts list and service manual
CS0 & CS Series clutch shift pto parts list and service manual U.S. Pat.,2,0 for the allison world transmission CS0 & CS Series Clutch shift PTO Exploded View parts list and description item qty part number
KONGSKILDE 9200 DF Vertical Tillage - Assembly/Parts
KONGSKILDE 9200 DF Vertical Tillage - Assembly/Parts Kongskilde 9200 *Model may not be exactly as shown. Kongskilde reserves the right to make changes to product designs and specifications without notice
BISTRO 2 Hot Chocolate Dispenser SPARE PARTS CATALOG
Hot Chocolate Dispenser SPARE PARTS CATALOG TABLE OF CONTENTS WHIPPER ASSEMBLY Pages 3-4 HOPPER ASSEMBLY Pages 4-5 TANK ASSEMBLY Pages 6-9 SWITCHES Page 9 DOOR ASSEMBLY Pages 10-11 MISCELLANEOUS COMPONENTS
Boxer 700HDX Parts Manual
BIG POWER IN ALL PLACES Phone: Sales - 800-831-0042, Parts and Service - 800-255-8839 www.boxerequipment.com Boxer 700HDX Parts Manual SN 5082 and Higher Part No. 76345-820 Manufactured by: Morbark, LLC.
ALUMINUM & STEEL CAR CARRIERS
OWNER'S MANUAL ALUMINUM & STEEL CAR CARRIERS INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural
M REV. D APRIL 2010 BMR-44 PARTS MANUAL
M-94-09 REV. D APRIL 00 BMR-44 PARTS MANUAL 9 Slauson Avenue. Santa Fe Springs, CA. 90670 (800) 7-46 MAXON Lift Corp. 009 LIFT CORP. CUSTOMER SERVICE: (56) 464-0099 (800) 7-46 FAX: (888) 77-77 9 Slauson
LB601B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-051 2011/06 LB601B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 794099 Top End Repair Kit 794237 Includes Piston Rings & Expanders, Packing
MODEL JOHN DEERE 4900 SERIES L3030G4 / MULTAPPLIER Parts List
MODEL JOHN DEERE 4900 SERIES L3030G4 / MULTAPPLIER Parts List UNIT SERIAL NO. MULTAPPLIER SERIAL NO. MANUAL NUMBER: -0 EFFECTIVE 05/07 330 76TH AVE SW CEDAR RAPIDS, IA 5404-705 PHONE (39) 363-88 FAX (39)
CS41 SERIES CLUTCH SHIFT PTO
CS41 SERIES CLUTCH SHIFT PTO PARTS LIST AND SERVICE MANUAL Patent #2004200334 Muncie Power Products, Inc. CS41 SERIES CLUTCH SHIFT PTO EXPLODED VIEW 46 2 MUNCIE POWER PRODUCTS, INC. PARTS LIST AND DESCRIPTION
For New Holland CR 920/940/960/970/980/9040/9060/9080 CX 720/740/760/780/820/840/860/880/8030/8040/8050/8060/8070/8080/8090
PARTS CATALOG MUD HOG REAR WHEEL DRIVE For New Holland CR 920/940/960/970/980/9040/9060/9080 CX 720/740/760/780/820/840/860/880/8030/8040/8050/8060/8070/8080/8090 TUTHILL DRIVE SYSTEMS MODEL NUMBERS: CNH4005
Four Post Surface Mounted Open Front Lift Capacity 14,000 lbs. (7,000 lbs. per axle)
Four Post Surface Mounted Open Front Lift Capacity,000 lbs. (,000 lbs. per axle) December 0 by Vehicle Service Group. All rights reserved. CO0. LP00 PB00 Rev. A //0 RUNWAYS SW00 (Used on some models between
SECTION 6 PARTS LIST
SECTION FIGURE NO. DESCRIPTION PAGE NO. -1 - - -4-5 - - -8-9 Oven Panels, Window and Legs Exploded Drawing Air Finger Exploded Drawing Control Panel Exploded Drawing Blower and Shroud Exploded Drawing
FOR SERIAL NUMBERS THROUGH 60847
PARTS MANUAL ER52FX730V FOR SERIAL NUMBERS 60706 THROUGH 60847 ENCORE MANUFACTURING A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. ENCOREEQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX
V75-II PLOW PARTS MANUAL
PLOW RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: rwf@wwdc.com GENERIC JANUARY 2015 The information contained
CNG Frame Mount FSM Parts Manual
CNG Frame Mount FSM Parts Manual Printed December 16, 2016 Rev C Preface Proper installation, service, and repair are important to the safety of the service technician and the safe, reliable operation
PARTS MANUAL BRON HSI PLOW
PARTS MANUAL BRON HSI PLOW RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: parts@rwfbron.com GENERIC JANUARY 2015
PARTS CATALOG FOR. Mud Hog System II & System III 2-Speed Rear Wheel Drive FOR JOHN DEERE 9960, 9965 & 9970 COTTON PICKERS
PARTS CATALOG FOR Mud Hog System II & System III 2-Speed Rear Wheel Drive FOR JOHN DEERE 9960, 9965 & 9970 COTTON PICKERS Mud Hog Model Numbers Tread Center MH System 9960 9965 & 9970 JD47601 JD47651 82-90
BG8A and BG8B MATERIAL LIST
BG8A and BG8B HYDRAULIC WINCH MATERIAL LIST PACR WINCH DIVISION P.O. BOX 547 BROKEN ARROW, OK U.S.A. 7403 PHONE (98) 25-85 FAX (98) 259-575 www.paccarwinch.com LIT226 R4 4/2009 Printed in U.S.A. Copyright
FOR SERIAL NUMBERS 21304U00192 THROUGH U00534
PARTS MANUAL WYS52FX730V FOR SERIAL NUMBERS 21304U00192 THROUGH 201308U00534 WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWNPOWEREQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103
MK-101 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below.
M REV. K SEPTEMBER Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns
M-07- REV. K SEPTEMBER 03 Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns MAXON Lift Corp. 03 LIFT CORP. 9 Slauson Ave. Santa Fe Springs,
SP-850 INSTALLATION, OPERATION, MAINTENANCE & PARTS
OWNER'S MANUAL SP-850 INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not
FIGURE 1-3. LEFT OP CONTROL BOX. MARCH/2011 HST-1-3, Page 1 of 2
FIGURE 1-3. LEFT OP CONTROL BOX MARCH/2011 HST-1-3, Page 1 of 2 FIGURE 1-3. LEFT OP CONTROL BOX MARCH/2011 HST-1-3, Page 2 of 2 FIGURE 1-3A. LEFT OP CONTROL BOX MARCH/2011 HST-1-3A, Page 1 of 2 FIGURE
WX540-LEU Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (9) 99-98 Fax: (9) 99- www.embmfg.com WX0-LEU Trailer Log Splitter Parts Manual S/N E9USES00 & After Refer to the operators manual
Vision 17B/BT. Section II Parts and Service Manual (78454B) CLARKE TECHNOLOGY Operator's Manual - Vision 17B/BT Page -23-
Vision 17B/BT Section II Parts and Service Manual (78454B) Operator's Manual - Vision 17B/BT Page -23- HOW TOO CORRECT PROBLEMS IN THE MACHINE PROBLEM CAUSE ACTION There isn't any solution flow. The solution
Spearhead TWIGA. TWIGA Reach Mower 555/600/655T/700T 555FR/600FR. Edition 2.5 June 2014 Part No
TWIGA Reach Mower 555/600/655T/700T 555FR/600FR Edition 2.5 June 2014 Part No. 8999057 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 Slew Post 8 Lift Frame 10 Tank Lid 12 Rear Panel 13 Stabiliser Brackets
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: 0 Griffin Ave. Selma, AL 0 () () 00 Parts Ordering 00 0 Fax 00 www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL October, 0 0
TANK LIDS, REAR STEP AND WHEELS
TANK LIDS, REAR STEP AND WHEELS M9060-22 Rev.4/98 FOR MODELS - KP4F, KP6F, KP6R 4/98 Item Part Number Part Description Qty. 1 9040--16--0 Tank Lid Weldment (KP4F -- Front Load) 1 9060--16--0 Tank Lid Weldment