Airframe Group Item Description Part Number Size
|
|
|
- Mabel Cobb
- 5 years ago
- Views:
Transcription
1 Parts List: LS-1 Airframe Group Canopy - LS1 Aluminum sheet, 6061 T " x 1.5" 8" Angle, aluminum 6061-T " x 2" x.125" 6" Bar stock, acetal " x 1.25" 3" Bar stock, alum " x.125" 8" Bar stock, UHMW " x 2" 2.75" Bracket, canopy support arm attach ALC-0023 Bracket, gas strut left ALC-0021 Bracket, gas strut right ALC-0022 Gas spring - 15lb 4138T57 Handle, exterior - drilled TF Handle, interior Nut, hex nyloc 90715A135 5/16-18 Nut, Lock Thin Hex 18-8 SS 90101A237 5/16" - 18 Tab, canopy centering ALC-0024 Washer, nylon flat 90295A173 3/8" ID - 1" OD Washer, nylon flat 90295A170 3/8" ID - 3/4" OD Cockpit - LS-1 Adapter, hose - vent SV-2 Bracket, upper - center fuel console ALS " Cable, seat belt ALB-0010 Clamp, hose - SCAT Hose 5388K /16" - 2 1/2" ID 5/16" bw Fuel console, center - precut ALS Hose, Scat " Seat belt set Seat Belt Vent, cockpit Window, quarter Left - formed ALC-0011L Window, quarter Right - Formed ALC-0011R Controls - LS1 Bearing, ball joint swivel 63195K63 1/4" ID, 21/32" OD EA 6 Bearing, flanged sleeve - bronze 6338K411 1/4 ID - 3/8 OD 5 Bearing, nylon flanged - control stick 6389K449 1/2" ID - 3/4" OD Bearing, nylon flanged - pedal pivot 6294K454 1" ID " OD EA 6 Bracket, pedal support truss - bulkhead side ALR-0039 Bracket, pedal support truss - firewall side ALR-0042 Cable, rudder - long (forward) ALR-0041 Cable, rudder - short (rear) ALR-0040 Guide, rudder cable D2300 Knob, black phenolic - flute tube 6046K12 Pulley, high strength nylon (rudder cable) 9466T81 Page 1 of 6
2 Rod end ball joint 6072K21 1/ Rod end ball joint 6072K Rod end ball joint 6072K22 5/16-24 Spring, flute tube 9654K917 Turnbuckle barrel AN155-32S Fiberglass parts - LS1 Aileron, left Aileron, right Canopy, tinted/un-tinted ALC-0010 Console, center Elevator, left Elevator, right Flap, left Flap, right Frame, canopy Fuel Tank, Left - Removable Fiberglass gallon Fuel Tank, Right - Removable Fiberglass gallon Fuselage Horizontal stabilizer, left - ver Horizontal stabilizer, right - ver Instrument panel assembly (pod) Luggage Floor Luggage panel bulkhead NACA scoop, large - (lower cowl) NACA scoop, large outlet - (lower cowl) NACA scoop, oil cooler - large part NACA scoop, oil cooler - small part NACA scoop, small - fuselage Rudder Seat pan - Left (new style) Seat pan - Right (new style) Seat support, left Seat support, right Tube, alum - aileron x.035 wall FT 20 Tube, alum - elevator x.065 wall FT 10 Weather strip, canopy ' FT 16 Wheel pant, main LSA - Left/Right Wheel pant, nose LSA - front half Wheel pant, nose LSA rear half Wing tip, sport - L Wing tip, sport - R Wing, Left - No Tank Wing, Right - No Tank Firewall forward - LS1 Air Box JU39-L Page 2 of 6
3 Air Filter Back plate, motor mount ALM-0012 Baffle, oil pan - main ALM-0020 Baffle, oil pan - top ALM-0021 Battery PC625 Bolt, undrilled - AN3-5A AN3-5A Cable End Adjuster - Choke, Brass JU /4" Cable End Adjuster - Throttle, Silver JU333 5/16" Cable End Nut CE1 3/16" D, 1/4" L Cable End Nut CE3 1/4" D, 1/8" L Cable End Nut CE4 3/16" D, 1/8" L Cable, Choke ' Cable, throttle " Clamp, Hose - Cabin/Carb Heat 5415K74 4-1/8" - 7" Clamp, Hose - Fuel Line 3/8" 5388K18 9/16" - 1-1/16" Clamp, hose - SCAT Hose 5388K /16" - 2 1/2" ID 5/16" bw 1 Clamp, Rubber Cushion 3225T2 1/4" Cowl, lower Cowl, upper Flange, Cabin Heat " Flange, Carb Heat " Foam, Adhesive Back 93565K66 1" x 15" IN 6 Hose, Rubber Oil 5645K18 1/2" FT 5 Hose, Scat " FT 5 Hose, Scat " FT 5 Mixer Box, Cabin Heat DL-003 Motor mount for Jabiru 3300 ALM-0010 Muff, Cabin Heat Blank ALM Muff, Carb Heat Blank ALM-0040 Muff, End Cap Cabin Heat ALM NACA Scoop SV-1 Nutplate Miniture MK Oil Bottle /8" Hose Barb Rivet, Blind 97525A420 1/8" 0 Tab, mounting - air ducts JU64 EA 6 Throttle extension kit JU330 Tubing, Aluminum 8978K14 1/2" OD 3" Washer, std AN Fuel system - LS1 Clamp, hose - Fuel Line 1/4" 5388K14 7/32" - 5/8" BX 3 Filter, Fuel (NAPA equiv for FRM G-1) /4" Firesleeve - high temp silicon 6172T13 1/2" ID Fitting, hose brass 5346K122 1/4 NPT female - 1/4 barb 90 Fitting, hose brass 53525K12 1/4 NPT to 1/4 barb 90 Fitting, hose brass 53525K11 1/8 NPT - 1/4 barb 90 Page 3 of 6
4 Fitting, Nipple Fully Threaded 4568K131 1/4" NPT 7/8" Flange, Threaded #2 for Fuel Tanks Fuel cap, w/keys A30L-CIR Fuel Pump, electric Gascolator Hose, rubber fuel line 54605K32 1/4" ID FT 12 Plug, hex socket brass - (for gascolator) 50785K113 1/4" NPT Plug, hex socket brass - (for gascolator) 50785K112 1/8" NPT Quick drain, fuel tanks SA-14 1/4" NPT Quick drain, gascolator SA-18 1/8" NPT Sending unit, fuel level FL-PE-01 Strainer, finger Tubing, clear PVC for fuel pump overflow 5233K53 3/16 ID x 1/16 wall Valve, Check Fuel Valve, Fuel H7309 Metal parts kit - LS1 Bellcrank, elevator mid ALE-0031 Bellcrank, elevator rear ALE-0030 Block, swivel - nose leg ALG-0026 Bracket, fuselage flap ALW-0054 Bracket, Horizontal tail attach ALT-0030 Bracket, inboard aileron hinge ALW-0062 Bracket, outboard - wheel pant ALG-0015 Bracket, outboard aileron hinge - left ALW-0064L Bracket, outboard aileron hinge - right ALW-0064R Canopy support arms ALC-0019 Central Beam/Sparbox, Front ALS-0010 Central Beam/Sparbox, Rear - LSA ALS-0011LSA Control Horn, Rudder Pedal Assembly ALR-0032 Control mixer ALS-0015 Control stick ALS-0016 Control Stick Mixer Tube ALS /8" Gear leg, main ALG-0010 Gear leg, main - LSA ALG-0010LSA Hinge, rudder lower ALR-0027 Hinge, rudder upper ALR-0026 Latch, canopy ALC-0020 Plate, angle of incidence ALW-0011 Pulley tangs ALR Push rod end (cone) ALE " x 5/16" - 24 Push rod end (cone) ALA /8" x 1/4" - 28 Push rod, aileron ALA " Push rod, elevator - intermediate ALE /4" Push rod, pedal mixer 16-3/16" ALR " Push rod, pedal to horn ALR /8" Rudder pedal assembly ALR-0030 Page 4 of 6
5 Shim, spar ALW Socket, lower gear - left LSA ALG-0011LLSA Socket, lower gear - right LSA ALG-0011RLSA Socket, Nose Gear ALG-0024 Socket, Nose Gear ALG-0024 Torque tube, flap ALS-0012 Torsional support - left LSA ALS-0013LSA Torsional support - right LSA ALS-0014LSA Vent, Wing Tip ALW-0070 Washer, Lower Nose Fork ALG-0033 Metal stock - LS1 Channel, Support Flute Tube - Precut, Predrilled ALR-0037 Channel, Support Truss Rudder Pedal ALR-0036 Firewall, Lightning - pre-cut, pre-drilled ALS #2 Finish Stainless steel Flute tube, pre-drilled ALR wall Hinge, Piano - Steel 1582A16 3' Tube, alum - rudder pedal support x.065 wall Misc hardware - LS1 Bolt, axel - nose gear 91247A451 5/8" " Bolt, spar 91247A446 5/8" " Cotter pin, nose gear axel 98338A190 1/8" x 1-1/2" Nut, hex - spar 95462A535 5/8-18 Nut, hex nyloc 90715A009 8/32 EA 60 Nut, slotted hex 95030A250 5/8-18 Nut, stick - coarse thread 90640A133 1/2-13 Rivet, blind - alum dome 97525A425 1/8".4" 5 Rivet, blind - alum dome 97525A440 1/8" grip 0 Rivet, blind - alumcountersunk A34AC 3/32" grip 00 Rivet, blind - SS dome 97525A505 3/16" grip 5 Rivet, blind - SS dome firewall 97525A510 3/16" grip 0 Screw, SS 100 C/S 93085A203 8/32 1-1/4" 0 Washer, Belleville for Nose Gear 9712K36 Washer, cadium plated, thin 98032A485 1/4" ID x.625" OD.040 thick 5 Washer, fender 98370A035 5/8" ID Washer, split lock 91475A035 5/8" ID Oil cooler - LS1 Aluminum sheet, 6061 T " x.050" 9" Angle, aluminum 6061-T " x 1" x.125" 5" Fitting, oil line AN-6-90 elbow 050-FCM-4032 Fitting, oil line AN-6 straight 050-FCM-1012 Fitting, oil line AN-6 to 1/8 NPT straight 050-FCM-2003 Fitting, oil line AN-6 to 3/8 NPT IN 15 IN 4 Oil cooler, 7 row - 3/8" NPT fittings Page 5 of 6
6 Oil line, braided 050-FBA-0600 FT 4 Pitot/Static - LS1 Nut, hex nyloc 91831A Pitot/Static Tube Screw, SS round head 91773A /4" Tubing, clear PVC for pitot/static system 5233K56 1/4" ID x 1/16 wall FT 20 Washer, flat nylon 90295A075 #6 Trim system - LS1 Control horn, elevator trim tab ALE-0032 IN 28 Nut, hex nyloc 91831A Screw, SS 100 C/S 93085A151 #6 3/4" Trim system T2-7A-TS KT 1 Washer, tinnerman #6 Wire, 5 conductor - teflon installation cable WC ' Wheels/Brakes - LS1 Axel assembly, main - Left WHLAXLE19-L.75 Axel assembly, main - Right WHLAXLE19-R 0.75 Brake line MSCNNR2/026 1/8" FT 20 Fitting, brake - 90 degree elbow (brass) MSC169P 1/8" NPT x 1/8" Compression EA 7 Fitting, brake - T (brass) MSC164P 1/8" Master cylinder MCMC-4 Resevoir, remote - brake fluid MCR-100 Tire, Main TIRT500X5-6AC 5.00 x 5 Tire, Nose Wheel TIRT1145AC 11x Tube, Main Tire TIRTU500X5 Tube, Nose Wheel TIRTU1145L Tubing, steel for nose block spacer 9220K34 1/4" ID IN 4 Tubing, steel for nose wheel spacer 9220K94 5/8" ID IN 4 Wheel, Main - w/brake Assm. WHLW51cc.75 Wheel, Nose WHLNW50CC 5" Page 6 of 6
Mooney Mite M-18X Plans and Drawings Index Arranged by Group Miscellaneous Group
Miscellaneous Group 110470 Bushings - Special 314410 Airspeed & Altimeter Installation 110190 Arm - Landing Warning 110070 Button - Static Airspeed 213260 Cone - Wing Fillet 110120 Control - Placard 616100
Jabiru Aircraft Pty. Ltd. Final Inspection Checklist J200/400. Firewall forward components
Jabiru Aircraft Pty. Ltd. Final Inspection Checklist J200/400 Registration No: Aircraft Checklist Pre Ground Test Model: Aircraft Serial No: Firewall forward components Propeller: Prop Size: 60 x 53 Other:
Jabiru Aircraft Pty. Ltd. Final Inspection Checklist. Engine Compartment
Jabiru Aircraft Pty. Ltd. Final Inspection Checklist Registration No: Aircraft Checklist Pre Ground Test Model: Serial No: Engine Compartment Propeller: Prop Size: 60 x 53 Other:.. Propeller Serial No:
TORNADO II, S, & SS FUSELAGE TRACKING
TORNADO II, S, & SS FUSELAGE TRACKING 92-INS-0176-C Nose Fork Assembly Instructions Approved 92-INS-0178-D Spindle and Brake Assembly Approved 92-INS-0181-F Anti Servo Control Assembly Approved 92-INS-0182-C
A Simplified Index of Mooney M-18 Drawings at the NASM
A Simplified Index of Mooney M-18 Drawings at the NASM Dwg. No. Dwg. date Title Models Remarks IDnum Price 0000 23-Aug-54 M-18 Aileron Crank Mooney M-18 17 x 22 DD-0029487 $2.10 0000 [Lower Pick-Up Strap
SECTION 4: RV-12 PARTS INDEX
SECTION 4: RV-12 PARTS INDEX PART NUMBER NOMENCLATURE SUB-KIT SECT# PAGE# PART TYPE: MAKE FROM MATERIAL: PART NUMBER NOMENCLATURE SUB-KIT SECT# PAGE# PART TYPE: MAKE FROM MATERIAL: A-1201A-L INBD NOSE
12/03 EXPLODED VIEW 1) L angles on first rear rib: moved from inboard to outboard side of rib (12/03)
ZODIAC CH 601 XL Drawing list December 04, 2003 3 rd revision of 2 nd edition 12/03 Summary of revisions from 07/03 to 11/03 AIRFRAME 6-X-0 DRAWING LIST Dec 4, 2003 6-X-1 6-T-0 6-T-1 6-T-2 6-T-3 6-T-4
MOONEY MITE AIRCRAFT DRAWINGS NASM Archives Accession No HOW TO ORDER COPIES OF DRAWINGS
SI-382712 BLUEPRINT MOONEY MITE AIRCRAFT DRAWINGS NASM Archives Accession No.1989-0028 HOW TO ORDER COPIES OF DRAWINGS NASM s collection of Mooney M-18 Mite drawings is available to restorers, researchers,
Seabee Annual/100-Hour Inspection
Date Completed Seabee Annual/100-Hour Inspection ENGINE Mechanic s Initials 1 Drain engine oil and check for foreign material 2 Check oil screen for proper rotation or looseness 3 Safety Oil Plug 4 Refill
11. Completing the Fuselage Engine Installation
11. Completing the Fuselage Engine Installation Engine Installations 11 1 230399 - Fit Engine Mount Reference: Photo 11.16(a) Parts Required: 4025094 Backing Plate Engine Mount (4) AN4-20A Bolt (4) AN3-11A
LANCAIR LEGACY PRE-TEST FLIGHT INSPECTION (8-04)
LANCAIR LEGACY PRE-TEST FLIGHT INSPECTION (8-04) OWNER PHONE # ADDRESS N SERIAL # AIRCRAFT TYPE DATE / / TACH TIME hrs. TOTAL TIME hrs. EMPTY WEIGHT CG. PAINT & INTERIOR? YES NO ENGINE TYPE PROPELLER ALL
365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
N398CM. RC-3 Serial Number 387 Zero Timed Restoration Details
RC-3 Serial Number 387 Zero Timed Restoration Details WING GROUP: Complete disassembly of wings, flaps, ailerons, lift struts, floats, and float struts. removal, alodine dip, and epoxy prime, w/bms 10-11.
12.0 CONTROLS 3/3/2006. Page 1
Page 1 Page 2 SR3500 Rudder Pedal Parts List ITEM DESCRIPTION PART NUMBER QTY 1 MASTER BRAKE PEDAL RP0015 2 2 SLAVE BRAKE PEDAL RP0016 2 3 PUSH ROD RP0017 4 4 SLAVE BRAKE TORQUE TUBE RP0018 2 5 MASTER
X-Air F - Parts Price List
Warning: These prices are outdated and will soon be replaced with current price lists. Please get a currently valid quote before ordering. X-Air F - Parts Price List Part Number 101058 101070 101074 101088
11 - Fairings. Fairings. February XLF Page 11-1
11 - Fairings Fairings February 2003 11-XLF Page 11-1 11 - Fairings This Page Intentionally Left Blank Page 11-2 11-XLF February 2003 11 - Fairings Contents 11.0 - Chapter Preface... 11-4 11.0.1 - Parts
Lower Fuselage Assembly. Controls
Lower Fuselage Assembly Jabiru Aircraft Controls Lower Fuselage Assembly 10.11 3 051000 1 Assemble & Fit Control References: Drawings 3000092-7 and 93000K4/1 see (10.12) Photo 10.11(a) to 10.11(i) Parts
LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G" MODEL LT160H42GBV LT160H42GBV2 LT180H48GBV2 WLT160H42GBV WLT180H48GBV2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS,
LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F MODELS LT160H42FBV LT160H42FBV2 LT180H48FBV2 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL
SECTION 22: FWD LOWER FUSELAGE VAN'S AIRCRAFT, INC F-1257 RUDDER PEDAL SUPPORT CHANNEL, 4 PLACES WD-1204 ENGINE MOUNT BRACKET, 2 PLACES
SECTION 22: F-1257 RUDDER PEDAL SUPPORT CHANNEL, WD-1204 ENGINE MOUNT BRACKET, VAN'S AIRCRAFT, INC. FWD LOWER F-1201B FIREWALL SHELF FIREWALL BOTTOM FUSELAGE TUNNEL RIB F-1271-R FWD FUSE CORNER SKIN F-1288
The tie to tube front windshield was rounded to avoid a distorted by this point.
CHANGES IN AIRFRAME IBIS MAGIC GS-700 (2.008) Drilling of plastic polycarbonate drill with 9/64 so that it is an amplitude when riveting. The tie to tube front windshield was rounded to avoid a distorted
X-Air S - Parts Price List
X-Air S - Parts Price List Part Number Part Name Price AX06070 Trailing edge pin M6 Bolt (but and drill) $1.14 101058 Plate, Exhaust $6.44 101070 Bush, exhaust support $4.59 101074 Exhaust pipe support
T-51 Mustang - 3/4 Scale Kit
T-51 Mustang - 3/4 Scale Kit Description Titan Aircraft is pleased to offer the T-51D Mustang. This P-51D replica incorporates material and systems not commonly found in comparably priced aircraft. This,
Page: REV 3: Add drill and tap information to Figure 4 DRILL #3, TAP 1/4-28 BOTH ENDS.
REVISION DESCRIPTION: 1) Page: 32-03 MEMO: Step 4 should not be bold. Fix WD-1213 callout in Figure 3. Page: 32-04 REV 3: Add drill and tap information to Figure 4 DRILL #3, TAP 1/4-28 BOTH ENDS. Add make
Angle, Aluminium, 6061T (3/4" x 3/4" x 1/16") 6. Carbon Fiber Spar 2. Dowel, Wood 1/2 O.D. 2. Foam, White 24" x 48" x 1/4" 1
Q2/200 BOM created from Packing Lists and Plans. Rev 1.1.0 by John Loram. Or Description Part Number / Dim List 1.2 List 1.3A List 1.4A List 2.5 List 2.6 LS- 1 #13 Raw Materials Angle, Aluminium, 6061T6
RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0
Parts Manual for RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0 MODEL ERZT185440BVE RZT22500BVE2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1,
Serial Number: Date of Purchase:
Congratulations on the purchase of your Ground Logic, Inc. machine. This product has been carefully designed and manufactured to be a dependable piece of equipment that will provide years of trouble-free
INTRODUCTION. This Catalog:
Editor s Note: This Parts Catalog has been reproduced from the original Republic Parts Catalog. Obviously, most of the information is obsolete; the pictures are accurate and up-to-date. If nothing else,
Serial Number: Date of Purchase:
Congratulations on the purchase of your Ground Logic, Inc. machine. This product has been carefully designed and manufactured to be a dependable piece of equipment that will provide years of trouble-free
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO
Table of Contents. Tail Wheel Assembly Installation.. page 01. Stabilizer Installation.. page 02. Fin Installation.. page 03
Table of Contents Tail Wheel Assembly Installation.. page 01 Stabilizer Installation.. page 02 Fin Installation.. page 03 Elevator and Rudder Hinge Installation.. page 04 Rudder Controls.. page 05 Elevator
PARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.
Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,
Skyview Instrument Panel for Rotax Engine
Power Assembly Group: 1 Odyssey Dry Cell Battery PC-680 1 Master Relay 111-226 2 Metric tap bolt, SS 18-8, 6mm x 1.0mm x 20mm 2 #6 lock washer, SS 18-8 2 M6 Rivnut 6 Battery #8 Cable (6 feet) 3 Silicon
Instruction Manual BULLDOG. Wingspan : 1410 mm (55.5in) : 1450 mm (57.1in) : 4900gr gr. Weight. : 6-9 Channel/ 7 servo high torque, 1standard
Wingspan : 1410 mm (55.5in) Length Weight Radio Engine : 1450 mm (57.1in) : 4900gr - 5600gr : 6-9 Channel/ 7 servo high torque, 1standard : 1.20/ 2 stroke 1.80/ 4 stroke KIT CONTENTS: We have organized
Parts Manual Rev. B RZT48 /
115 91 36-2 Rev. B Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%
Section 1.4 FINAL INSPECTION
File Number MDRA C20 MANUAL of PROCEDURES for INSPECTION of METAL, TUBE, FABRIC and WOOD AMATEUR-BUILT AIRCRAFT, INSPECTION AND TECHNICAL INFORMATION RECORD Section 1.4 FINAL INSPECTION GENERAL 1. Have
PARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
PARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB WITH SIDEKICK CHEMICAL DISPENSOR WITHOUT SIDEKICK CHEMICAL DISPENSOR 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221
GP-II 10/16/2013 COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
GP-II PAGE GP II DECK SUB ASSEMBLY 3 8 36 3 2 9 6 29 39 3 22 5 38 3 25 39 30 3 6 33 27 2 27 23 0 20 2 26 35 2 27 2 3 7 28 32 2 37 28 9 2 5 0 7 8 3 39 3 PAGE 2 GP II DECK SUB ASSEMBLY ITEM NO. PART NUMBER
PARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
Parts Manual Rev. A RZT48 /
115 91 36-2 Rev. A Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%
Commercial Walk-Behind Mower Fixed Deck, Pistol Grip, Hydro Drive with 48in TURBO FORCE Cutting Unit
Form No. 3391-869 Rev A Commercial Walk-Behind Mower Fixed Deck, Pistol Grip, Hydro Drive with 48in TURBO FORCE Cutting Unit Model No. 39938 Serial No. 315000001 and Up Register at www.toro.com. Original
LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G" MODEL ELT145H33GBV LT145H33GBV LT145H38GBV LT150H38GKV WLT145H38GKV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC.
Parts Manual MZ5424SR /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ2SR / 9700902 Please
Retriever PARTS LIST Advance MODEL 5200G(OBSOLETE)
Retriever PARTS LIST Advance MODEL 5200G(OBSOLETE) 5/85 revised 2/01 FORM NO. 56042131 TABLE OF CONTENTS DESCRIPTION PAGE OUTER BODY...1-2 HYDRAULIC PUMP, ENGINE & FUEL TANK...3-4 HYDRAULIC OIL FILTER,
MS:176 ASSEMBLY MANUAL. Graphics and specifications may change without notice.
ASSEMBLY MANUAL MS:176 Graphics and specifications may change without notice. Specifications: Wing span ------------------------------98.4in (250cm). Wing area ----------------1576.4sq.in (101.7sq dm).
PARTS LIST PONY 20 SCA
PARTS LIST PONY 20 SCA WIRING DIAGRAM PART NO. PART DESCRIPTION 4990601 GEARMOTOR - 120 VOLT 4990581 GEARMOTOR - 240 VOLT 4890391 VAC MOTOR - 115 VOLT 4891251 VAC MOTOR - 240 VOLT 4991321 BRUSH MOTOR -
MOONEY MITE AIRCRAFT DRAWINGS NASM Archives Accession No HOW TO ORDER COPIES OF DRAWINGS
SI-382712 BLUEPRINT MOONEY MITE AIRCRAFT DRAWINGS NASM Archives Accession No.1989-0028 HOW TO ORDER COPIES OF DRAWINGS NASM s collection of Mooney M-18 Mite drawings is available to restorers, researchers,
Parts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 6/2010 Shown with OPTIONAL Grass Collection System 2010 Wright Manufacturing Inc., All Rights
Fuselage tunel SD Washer pos. 8, set 22,78 27, Bush pos. 9, pair 12,06 14, Bush pos. 10, pair 12,06 14,35
PRICE LIST OF SD-1 Minisport Parts Valid from 1.1.-31.12.2018 P/N Composite parts VK netto inkl. MWSt 101001 Wing tip, pair 314,90 374,73 101002 Elevator tip, pair 54,94 65,38 101003 Fuel tank complete
8/6/2013 LX-30 MACHINES: COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
LX-0 MACHINES: 00 000 STONEKOR LLC -800-6-09 customerservice@stonekor.com www.stonekor.com PAGE LX-0 GRINDER DECK SUB ASSEMBLY 0 6 7 7 9 8 8 9 8 7 6 0 9 7 8 6 7 6 8 0 6 0 PAGE LX-0 GRINDER DECK SUB ASSEMBLY
Kit Manual Components for Pipistrel Sinus & Virus Aircraft. Pipistrel. Sinus & Virus Kit Manual Components SAMPLE
Pipistrel Sinus & Virus Kit Manual Components http:www.pipistrel-usa.com Pipistrel USA 2006 Release 1.0 Page 1 of 70 http:www.pipistrel-usa.com Pipistrel USA 2006 Release 1.0 Page 2 of 70 Table of Contents
Parts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 9/2007 Shown with OPTIONAL Grass Collection System 2006 Wright Manufacturing Inc., All Rights
408,408A,410,410A,512 Series
Direct Mount Pump 1 78008 PUMP - 18 GPM 1 78006 PUMP - 24 GPM 1 2 77CH0 1-1/4 X 3 NPT NIPPLE 1 3 77C90 1-1/4 X 90 M-F O-RING ADAPTER 887-554-20 1 4 77620 1-1/4 O-RING PLUG 900598-20 1 5 44316 1 O-RING
Page REV 1: Added 'Step 2: See the "REMOVE THIS TAB, BOTH SIDES" callout near Detail A. Modify four SB375-4 Snap Bushings as shown.
14401 Keil Road NE, Aurora, Oregon, USA 97002 PHONE 503-678-6545 FAX 503-678-6560 www.vansaircraft.com info@vansaircraft.com Service Letters and Bulletins: www.vansaircraft.com/public/service.htm REVISION
Parts Manual RZ4216 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual RZ4216 / 6645501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,
Parts List for The 36 & 42 Wright Stander Mower (For Serial Numbers and Higher Until Superseded)
Parts List for The & Wright Stander Mower (For Serial Numbers 00 and Higher Until Superseded) Replace with newer revisions as they become available 00 Wright Manufacturing, Inc. All rights reserved Revised:
Parts Manual Zero Turn Mower / Z 248F
Parts Manual Zero Turn Mower / Z 248F 967262501-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
Spartan Mower Parts Manual RT
Spartan Mower Parts Manual RT Revision Date -- TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
Numatic International Spare Parts Model No: Vario Chassis / Drive Motor Assembly NB: FOR WIRING SEE DRAWING: WD-0359
Model No: Vario Chassis / Drive Motor Assembly 0 0 0 0 0 0 DRAWING: EXP-0 ISS:A0 0/0/00 0 0 0 Model No: Vario Chassis / Drive Motor Assembly 00 CHASSIS WELDED ASSEMBLY (PAINTED ANTHRACITE GREY) 0 MM DIAMETER
Table of content. Illustrated Parts Cataloque XA42 XA41
Table of content ATA Page Content 23 3 Communication 24 4 Electrical System 25 7 Equipment and Furnishings 27 11 Flight Controls 28 18 Fuel 31 20 Indicating / Recording Systems 32 23 Landing Gear 34 27
Chapter 27 FLIGHT CONTROLS
Chapter 27 FLIGHT CONTROLS 27-Title Page 1 January 23, 2012 INTENTIONALLY LEFT BLANK 27-Title Page 2 January 23, 2012 LIST OF EFFECTIVE PAGES Chapter Section Page No. Date 27 27-Title 1 January 23, 2012
Spartan Mower Parts Manual SRT
Spartan Mower Parts Manual SRT Revision Date -- TABLE OF CONTENTS SRT Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
Trainer Assembly Manual
Trainer Assembly Manual www.pilot-rc.com -Pilot Trainer- 1 -Pilot Trainer- 2 -Pilot Trainer- 3 -Preliminary i wing & stab assembly- 1-) Locate both Plywood wing joiners (Large and small one) 2-) Insert
G & P ONE GRINDER 8/6/2013 COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
G & P ONE GRINDER PAGE 1 G & P ONE GRINER DECK SUB ASSEMBLY PARTS BREAK DOWN 6 17 15 8 14 9 6 5 16 1 0 8 4 1 7 9 40 10 9 5 6 9 9 9 8 18 9 9 9 19 9 9 1 11 4 9 0 5 5 0 6 5 8 7 4 7 7 1 41 STONEKOR LLC 1-800-6-0519
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,
Parts Manual Rev. A Z 246 /
115 97 16-27 Rev. A Parts Manual Z 246 / 967 844501-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
Seabee Annual Inspection Procedures
Procedures Due to the wide variety of Seabee s flying out there, these procedures should be modified to fit YOUR Seabee. Make sure that all AD s are complied with as well as any required Service Bulletins
Main Components Early Style
Pipe & Bolt Threading Machine Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure
Dassault Aviation FALCON 7 X. for Jet CAT P160. Assembly Manual. AVIATION Design
Dassault Aviation FALCON 7 X for Jet CAT P160 Assembly Manual AVIATION Design ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr
Parts List for Sentar (For Serial Numbers Prior to 19729)
Parts List for Sentar (For Serial Numbers Prior to 19729) Replace with newer revisions as they become available 2006 Wright Manufacturing, Inc. All rights reserved Updated 08/2006 52", 61" CUTTER DECKS
REVISION LIST CHAPTER 6: AILERON CONTROLS
REVISION LIST CHAPTER 6: The following list of revisions will allow you to update the Legacy construction manual chapter listed above. Under the Action column, R&R directs you to remove and replace the
AIRCRAFT LANDING GEAR CONSTRUCTION MANUAL
APPENDIX AI KITPLANES FOR AFRICA AIRCRAFT LANDING GEAR CONSTRUCTION MANUAL Revision: C September 2008 Page L1 of 20 NOTE: Please read the General Manual before proceeding. Please read through the entire
FIGURE 9 - PARTS LIST: MK-3024K CONCRETE SAW - P/N
FIGURE 9 - : MK-3024K CONCRETE SAW - P/N 166449 20 FIGURE 9 - : MK-3024K CONCRETE SAW - P/N 166449 IDENTIFYING 1 SCREW, 3/8-16 X 1-1/4 HEX HEAD CAP 150774 2 2 GRIP, HANDLE, 1.0 ID 150842 2 3 WASHER, 3/8
HUSQVARNA 12.5 HP LAWN RIDER MODEL NO. LT125 (HE12536B)
ILLUSTRATED PARTS BREAKDOWN HUSQVARNA. HP LAWN RIDER MODEL NO. LT (HEB) 00-0.0. JH Printed in the U.S.A. TRACTOR - - MODEL NO. LT (HEB), PRODUCT NO. 00-0 HOOD 7 7 00 Bracket Asm., Pivot Hood RH 7 000 Bracket
Parts Manual WH3615/ WH4817/ WH5217/ English
Parts Manual WH6/66400 WH48/664002 WH2/66400 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English 2008 HTC. All rights reserved. Beatrice,
REVISION LIST CHAPTER 22: CABIN VENTILATION
REVISION LIST CHAPTER 22: The following list of revisions will allow you to update the Legacy construction manual chapter listed above. Under the Action column, R&R directs you to remove and replace the
25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
MK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
Spartan Mower Parts Manual RT
Spartan Mower Parts Manual RT Revision Date -- TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
GrandStand Mower With 122cm TURBO FORCE Cutting Unit
Form No. 3397-823 Rev A GrandStand Mower With 122cm TURBO FORCE Cutting Unit Model No. 74504TE Serial No. 316000001 and Up Register at www.toro.com. Original Instructions (EN) *3397-823* A Ordering Replacement
RECOMMENDED MOTOR AND BATTERY SET UP
SPECIFICATION - Wingspan: 1404mm (55.3in) - Length: 1134mm (44. 6 in) - Flying weight: 3.2-3.4 kg - Covering type: Genuine ORACOVER - Spinner size: scale type (not included) - Radio: 4 channel minimum
Parts Manual MZ5225 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ5225 / 966690502 Please
PARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A
The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag
REVISION LIST CHAPTER 21: FLAP SYSTEM COMPLETION
REVISION LIST CHAPTER 21: The following list of revisions will allow you to update the Legacy construction manual chapter listed above. Under the Action column, R&R directs you to remove and replace the
Instruction Manual EXTRA 260-EP. 1075mm (42.32 in) 1000mm (39.37 in) 1100gr gr. 4 channel - 4 mini servo. Axi motor 2820
1075mm (42.32 in) 1000mm (39.37 in) 1100gr - 1400gr 4 channel - 4 mini servo Axi motor 2820 KIT CONTENTS: We have organized the parts as they come out of the box for better identification during assembly.
AEROPRO Checklist B Service/Maintenance
AEROPRO Checklist B Service/Maintenance 2 Periodic maintenance AIRFRAME Maintenance Interval Time Limitation - after first 25 2 hours when reached - after first 50 3 hours when reached - after 100 5 hours
MODEL 95 PARTS CATALOG ALPHABETICAL INDEX , 21, 21A 31 3, 4, 4A , 58A 60 61A, 61B, 61C
A MODEL 5 PARTS CATALOG FIGURE A FIGURE Access Doors, Wing Accessories 7 Accumulatn~.' Propeller Governor Unfeathering. 56 Actuator Aileron T"JJ. Cover, Fl2v Cowl Flap Elevator Tab. Flap. Landing Gear
Parts Manual Rev. A
115 96 28-27 Rev. A Parts Manual Z 242F / 967 271802-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
Moto Guzzi Fasteners (V7, Ambassador, and Eldorado)
Brake switch Rear brake light switch mount 5 0.80 16 2 Slotted 2 Brake switch Front hydraulic brake switch to 8 1.25 45 13 1 Hex 1 fork Brake switch Hydraulic switch spacer 22 1 N/A Choke lever mounting
Z4822/ Z4824/
Parts manual Z4822/968999301 Z4824/968999303 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English 2005 Husqvarna. All Rights Reserved.
PIPER AIRCRAFT PA NOTE- Perform all inspections or operations at each oj the inspection. 1. Inspectspinnerandbackplate
PPER ARCRAFT PA-38-111 (.MANTENANCE MANUAL SCHEDULED MANTENANCE. PERODC NSPECTONS. -NOTE- Perform all inspections or operations at each oj the inspection intervals as indicated by a circle (). nspection
2008 PRICE LIST. 900 Airport Rd Merritt Island, FL USA. Phone: (321) Fax: (321)
2008 PRICE LIST 900 Airport Rd Merritt Island, FL 32952 USA Phone: (321) 452-7168 Fax: (321) 452-1880 http://www.compairinc.com Comp Air -- Year 2008 Product Line Comp Air manufactures kits for a complete
Spartan Mower Parts Manual SRT
Spartan Mower Parts Manual SRT Revision Date -- TABLE OF CONTENTS SRT Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING INSTALLATION
INSTALLATION INSTRUCTIONS Hot Fox In-Tank Fuel Warmer READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING INSTALLATION Models covered by these instructions include: HFG 0-0 HFG 0- SHFT--0- SHH--0 TWHF 0- HFG
Spartan Mower Parts Manual RT
Spartan Mower Parts Manual RT TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension Assembly..-0 Drive
Z253 Z Master with 62in SFS Side Discharge Mower
Form No. REV A Z Z Master with 6in SFS Side Discharge Mower Model No. 00000 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and
SIZE.120 OR 30CC SCALE 1:5 ARF
PC21 PILATUS MK2 SIZE.120 OR 30CC SCALE 1:5 ARF SPECIFICATION - Wingspan: 1772mm (69.72in) - Length: 2019mm (79.5 in) - Flying weight: 6.4-7.2 kg - Wing area: 57.6 dm2 - Wing loading: 113g/dm2 - Wing type:
Parts Manual Zero Turn Mower / Z
Parts Manual Zero Turn Mower / Z 246 967271501-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support