6150 Power Sweeper. 5/06 revised 2/09 FORM NO

Transcription

1 6150 Power Sweeper OPTIONS PARTS LIST After Serial Number American-Lincoln Models: , CE, , CE, , CE, , CE, , CE, , CE, , /06 revised 2/09

2

3 TABLE OF CONTENTS 1 DESCRIPTION Page IC and Battery model common options Amber Strobe Light W/ Overhead Guard...2 Amber Strobe Light W/O Overhead Guard...3 Back-Up Alarm Option...5 Brake Light Option...7 Broom Options...8 Left Hand Side Broom Option (Before December 2006) Left Hand Side Broom Option (After November 2006)...15 Seat Belt Option...9 Seat-Suspension Option...16 Stainless Steel Hopper Option...17 Tire Options...19 Wet-Sweep Bypass IC model only options Clogged Filter Indicator Option (IC models only)...22 High Torque Motor (2-Cyl Gas/LP) Option (IC models only)...24 High Torque Motor (3-Cyl Gas/LP/Diesel) Option (IC models only)...25 Hopper Temperature Option (IC models only)...27 LP Option (IC models only)...31 LP Option Tank Assembly (IC models only)...33 Overhead Guard Option (IC models only)...34 Rear Work Light Option (IC models only)...36 Spare Parts Kits Turn Signal Option (IC models only)...41 Vac Wand Option (IC models only)...43 Battery model only options Battery Option (Battery models only)...46 Clogged Filter Indicator Option (Battery models only)...23 Hopper Temperature Option (Battery models only)...29 Overhead Guard Option (Battery models only)...35 Rear Work Light Option (Battery models only)...37 Spare Parts Kits...38 Vac Wand Option (Battery models only)...45 WHEN ORDERING PARTS * Use the numbers from the Ref. No. columns in this parts list. * Specify the model and serial number of the machine. * Use the space below to record the model and serial number for future reference. Model Serial No.

4 2 AMBER STROBE LIGHT w/ OVERHEAD GUARD Strobe-Amber (12 To 80 Vdc) Plate - Flasher Mounting Harness, Warning Light Clamp Nutsert, 1/ Grommet Shroud, Delphi. W.P. 2 Way Bolt-Hex Head, Finished, 1/4-20x3/4lg HARDWARE USED: H Nut-#10-24 Elastic Stop Nut H Washer,Lock,1/4 Helical Spring H Screw, #10-24 x 5/8 LG OPTION NO

5 06-5 AMBER STROBE LIGHT w/o OVERHEAD GUARD OPTION NO Light Pole Strobe VDC Amber Threaded Insert- 3/ Harness, Warning Light Shroud, Delphi W.P. 2 Way Plug Button HARDWARE USED: H Nut, Hex Fiber Insert #10-24 H Screw, 3/8-15 x HHC H Screw, #10-24 x.625 THM

6 4 BACK-UP ALARM OPTION 06-5 H89 H2 H28 H30 H121 H15 H26 H27 C-1264

7 06-5 BACK-UP ALARM OPTION 5 OPTION NO Cap - (Boot) - Instrument Panel Circuit Breaker (10 Amp) Washer, Internal Lock Switch Bracket - Switch Alarm - Back Up Ref. Ring Terminal /4-20 Insert Wing Wire Terminal Terminal Terminal Terminal Male Bullet Ring Terminal HARDWARE USED: H Flat Washer,.375 x.156 x.047 H Screw, 1/4-20 x.750 HHC H Nut, 1/4-20, Insert Fiber H Washer,.625 x.281 x.063 H Screw, 1/4-20 x.750 HHC H Lock Washer, Helical Spring, 1/4 Med. H Nut, Fiber Insert #8-32 Steel H Screw, #8-32 x RHM

8 6 BRAKE LIGHT OPTION

9 06-5 BRAKE LIGHT OPTION OPTION NO Switch Grommet Bracket, Brake Switch /4-20 Insert Nut HARDWARE USED: H Flat Washer,.375 x.156 x.047 H Screw, 1/4-20 x.750 H Lock Washer, Helical Spring 1/4 Med. H Nut, Fiber Insert #8-32 Steel H Screw, #8-32 x RHM

10 8 BROOM OPTIONS P4195a 1 Main Brooms: Proex and Wire Proex Nylon (Herringbone Pattern) Nylon, High Density Fiber and Wire, High Density Side Brooms: Nylon (Standard) Polypropylene Wire

11 06-5 SEAT BELT OPTION OPTION NO Seatbelt, 60 NOTE Bushing NOTE 1: Mounting hardware is included with the Seatbelt

12 10 LEFT HAND SIDE BROOM OPTION (before December 2006) H53 H47 16 H H43 11 H37 6 H46 Drill Out To 1/2 Both Ends H43 H46 H H25 13 H35 H49 H46 9 H19 3 H46 H48 H43 H H45 H H52 H73 H49 4 H48 9 H54 H H49 C1268A/9804 3

13 06-5 LEFT HAND SIDE BROOM OPTION (before December 2006) OPTION NO Bracket - Side Broom Bracket - Side Broom Spring Pivot Bracket - Side Broom Nut, Elastic Stop Nut Bushing Link - Side Broom Cable Turnbuckle Cable Spring Ref. Cable Side Broom Motor Pin - Side Broom - Flange Side Broom Fitting Hub - Side Broom - Weldment HARDWARE USED: H Screw, 1/4-20 x HHC H Nut, Hex 1/4-20 x HHC H Nut, ¼ Insert Fiber H Screw, 5/16-18 x HHM H Screw, 5/16-18 x HHC H Flat Washer,.687 x.344 x.062 H Nut, Hex. 5/16-18 x.500 x.265 H Nut, 5/16-18, Insert Fiber H Screw, 3/8-16 x.750 HHC H Screw, 3/8-16 x HHC H Screw, 3/8-16 x HHC H Flat Washer,.750 x.390 x.094 H Lock Washer, Helical Spring, 3/8 Med. H Nut, 3/8-16 Hex. H Screw, 5/16-18 x HHC H Screw, 5/16-18 x 1.500

14 12 LEFT HAND SIDE BROOM OPTION (cont.) (before December 2006) H51 H34 H27 H36 6 H INSIDE 6 INSIDE H53 6 H50 H51 EXISTING R.H. SIDE BROOM EXISTING REMOVE RD HOSE FROM OUTSIDE BTM T PORT & ASSEMBLE TO FITTING OUTSIDE BTM TPORT 8 7 CONTROL VALVE L.H. SIDE BROOM C1268B/9803 9

15 06-5 LEFT HAND SIDE BROOM OPTION (cont.) (before December 2006) OPTION NO Pulley Clip Hose Clamp THD Insert 3/ Fiber Nut Fitting - 8ORS Straight Union Hose Hose - HYD - #8 x Flat Washer, 3/ Washer, 11/16 x.260 x.050 HARDWARE USED: H Washer,.625 x.281 x.063 H Screw, 5/16-18 x.750 HHC H Carriage Bolt, 5/16-18 x H Nut, 5/16-18 Insert Fiber H Screw, 3/8-16 x HHC H Screw, 3/8-16 x HHC H Lock Washer, Helical Spring, 3/8 Med.

16 14 LEFT HAND SIDE BROOM OPTION (after November 2006)

17 06-5 LEFT HAND SIDE BROOM OPTION (after November 2006) OPTION NO Bolt, Hex Head, 3/8-16 X Bolt, Hex Head, 3/8-16 X Bolt-Hex Head, 5/ Bolt-Hex Head, Finished, 3/ Bolt-Hex Head, Finished, 3/8-16 X Screw, 3/8-16 X 1-1/2 HHC Washer, 25/64 ID X 3/4 OD Flat Washer,.687 X.344 X /16-18, Hex Nut Nut, Jam 5/ Nut, Hex, Insert Fiber, 5/ Locknut-Elastic, 5/ Washer-Lock, 3/8, Helical Spring Nut, Hex, 3/ Screw, Hex Head, 5/16-18 X Screw, 5/16-18 X 1.50 Lg, Full Thread, HHC Fitting-10sae 90-8ORS Fitting, -08 Orfs Nipple Threaded Insert /-18 X 1.25, Hex Head Screw Nut, Hex, Stop, 3/ Washer-Axle Clip, Cable Pulley-Cable Spring-Brush Load Broom Lift-Mb-Sb Weldment Bracket-Side Broom Bracket, Side Broom Bracket-Pivot-Side Broom Brkt-Angle Adj-Sb (Welded) Side Broom-Nylon Cable-Side Broom (LH) Hose #8 Str-Str,13/16-16 Both Ends, 80 Lg Hose-#8 Str-Str,13/16-16 Both Ends,34.5 Lg Hub-Side Broom Link-Side Broom Lift Link, Side Broom Lift Pin-Safety Snap Motor, Hydraulic Rod, Threaded Yoke, Clevis Spring, Extension Cable-Side Broom (Left Side) Yoke, Clevis

18 16 SUSPENSION SEAT OPTION 06-5 INSTALL BOTH ARMS 1 H Seat, Suspension HARDWARE USED: NOTE: DO NOT USE SEAT MOUNTED SEATBELT ON THIS MACHINE H Nut, 5/16-18 Fiber Insert OPTION NO

19 06-5 STAINLESS STEEL HOPPER OPTION OPTION NO Hopper (Weldment) Clamp, Hopper Flap Baffle, Hopper Air Baffle, Hopper Air Door, Hopper Dump Clamp, Dump Seal Clamp, Dump Door In lieu of standard parts , , , , , ,

20 18 TIRE OPTIONS

21 06-5 TIRE OPTIONS *OPTION NO Wheel Assy., Pneumatic Foam-filled *Service Parts Rim Assy. (4 x 8 x 3.75) Tire Only (4.8 X 8) Tube Decal, Pneumatic Wheel Warning ~OPTION NO Wheel Assy., Solid Pneum. Soft Shoe Lug Tread ~Service Parts # Rim Assy. (4 x 8 x 3.75) # Tire Only # = Revised or new since last update #OPTION NO Wheel Assy., Solid Pneum. Non-Mark Lug Tread #Service Parts Rim Assy. (4 x 8 x 3.75) Tire Only

22 20 WET SWEEP BYPASS OPTION Bracket, Solenoid Diode Assembly Screw - 1/4-20 X.625 Hhc Washer,Lock,1/4 Helical Spring Bolt-Hex Head, Finished, 1/ Terminal-.25 Fiso Female Fitting- 3/4-16 X 13/16-16 Tee Fitting, -8 Ors Swivel 90 Elbow Valve, Solenoid No Bracket, Solenoid Valve Hose, Ors -8, Str. X Str., 18-1/4 Long Switch OPTION NO

23 06-5 WET SWEEP BYPASS OPTION (WIRING) OPTION NO Diode Assembly Terminal Switch

24 22 CLOGGED FILTER INDICATOR OPTION (IC models only) H12 H6 H12 H159 H100 C-1266 OPTION NO Switch Filter Plug Fitting - 1/8 NPT - 1/4 Tube Hose 3/8-8 LG TyRap Terminal - #10 Ring Wire - 16 AWG Black Stranded Male Bullet Terminal #6SS HARDWARE USED: H Screw, x RHM H Nut, Hex Fiber Insert #10-24 H Screw, #10-24 x.625 THM H Lock Washer

25 CLOGGED FILTER INDICATOR OPTION (Battery models only) 23 OPTION NO Switch - Pressure Dif Filter Plug Fitting - 1/8 NPT - 1/4 Tube Hose 3/8-8 LG TyRap Terminal.25 Ring Wire - 16 AWG Black Stranded Male Bullet Terminal #6SS Grommet HARDWARE USED: H Screw, x RHM H Nut, Hex Fiber Insert #10-24

26 24 HIGH TORQUE DRIVE MOTOR (2 CYL GAS/LP) (IC models only) /10-05 OPTION NO Motor, Hydraulic Drive Cotter Pin (1/8 Dia. x 1.50)

27 06-5 HIGH TORQUE DRIVE MOTOR (3-CYL GAS/LP/DIESEL) (IC models only) /10-05 OPTION Motor, Hydraulic Drive Cotter Pin (1/8 dia. x 1.5 )

28 26 HOPPER TEMPERATURE OPTION (IC models only)

29 06-5 HOPPER TEMPERATURE OPTION (IC models only) OPTION NO Switch - Thermostat Wire Assembly [3]# Ty Rap Temperature Switch Bracket Relay Valve - Solenoid - NO [8]# Hydraulic Hose Bulk Head Connector Terminal.156 Female Bullet Wire - 16 AWG Stranded Black Terminal.25 FISO 17# Terminal.25 FISO Terminal.156 Male Bullet Diode Assembly Terminal - #10 Ring Screw - 1/4-20 X.625 HHC Bolt-Hex Head, Finished, 1/4-20 x 3/4 Lg Fitting- 3/4-16 X 13/16-16 Tee Fitting, -8 ORS Swivel 90 Elbow Bracket, Solenoid [ ]# Hose-Hyd Ors 8 Str To Jic 8str [ ]# Hose Hyd-8 Ors Str To 90 HARDWARE USED: H Nut, Hex Fiber Insert #10-24 H Screw, 1/4-20 x HHC H Nut, 1/4-20, Insert Fiber H Washer,.625 x.281 x.063 H100# Screw, #10-24 x.625 THM # = Revised or new since last update

30 28 HOPPER TEMPERATURE OPTION (Battery models only)

31 06-5 HOPPER TEMPERATURE OPTION (Battery models only) OPTION NO Switch - Thermostat Wire Assembly Ty Rap Bracket - Temperature Switch Relay - 36V Terminal.25 FISO Terminal.25 FISO Terminal.156 Male Bullet Terminal #10 Ring Terminal.156 Female Bullet Bulk Head Connector Connector - 3-Way Butt Splice Wire 16 AWG Stranded Black Scw-Ph. Thm #10-24 x.38 ZN HARDWARE USED: H Nut, Hex Fiber Insert #10-24 H Nut, 5/16-18, Insert Fiber H Screw, 5/16-18 x.750 HHC H Screw, #10-24 x.625 THM H Lock Washer

32 30 LP OPTION (IC models only)

33 06-5 LP OPTION (IC models only) OPTION NO NOLEE PART# Vacuum Switch N Inline LP Lockoff N Brass Vac. Tee N Brass Vac. Adapter N Brass Vac. Adapter N Beam 60 N Reg Bracket N Brass Fuel Outlet Fitting N Hydrastate Relief Valve N Brass Fitting N Bulkhead N Brass Fitting N Fuel Adapter N F Female Connector N Hose w/2 Swivel Ends 31 -N Hose w.2 Swivel Ends 34 -N ½ Vapor Hose N ¼ Vacuum Hose N * Kit, Low LP Switch Terminal, 3 way Terminal ft. Wire, 16 AWG Black Terminal - Ring Tye-Rap American-Lincoln LP Kit Part No.: *Switch Kit (Item 19) must be ordered separately

34 32 LP OPTION TANK ASSEMBLY (IC models only)

35 06-5 LP OPTION TANK ASSEMBLY (IC models only) OPTION NO Housing - LP Seat LP Tank Cover - LP Tank Ref. Hinge Clamp - LP Tank Pad - LP Tank Kit, Low LP Light Ref. Stop - Seat Decl Carriage Bolt, 1/4-20 x Ref. Spring Washer Hole Plug Clamp Screw, 1/4-20 x HHC Screw, 1/4-20 x.500 HHC Nut, 1/4-20 Insert Fiber Washer,.625 x.281 x Screw, 5/16-18 x HHM Washer Screw, 1/4-20 x HHM Lock Washer, Helical Spring 3/8 Med Nut, 3/8-16 Hex Screw-HHC 5/16-18 x Nut, 5/16-18 Insert Fiber Carriage Bolt, 1/4-20 x Nut, Hex 1/4-20 x.437 x.218

36 34 OVERHEAD GUARD OPTION (IC models only) 06-5 H131 H48 H53 OPTION NO Overhead Guard, Top Weld Overhead Guard, Leg Weld R.H Overhead Guard, Leg Weld L.H Plug Button Nut, Fiber THD Insert - 3/8 HARDWARE USED: H Screw, 3/8-16 x HHC H Lock Washer, Helical Spring 3/8 Med. H Carriage Bolt, 3/8-16 x 1.000

37 06-5 OVERHEAD GUARD OPTION (Battery models only) H52 H131 H48 H53 C-1275 OPTION NO Overhead Guard Top Weldment Overhead Guard Leg Weldment - RH Overhead Guard Leg Weldment - LH Plug Button Fiber Nut OHG Gate Pin - Safety Snap THD Insert - 3/ Screw HARDWARE USED: H Screw, 3/8-16 x HHC H Flat Washer,.750 x.390 x.094 H Lock Washer, Helical Spring 3/8 Med. H Carriage Bolt, 3/8-16 x 1.000

38 36 REAR WORK LIGHT OPTION (IC models only) Switch Lens - Work Light Light Covoluted Tube Circuit Breaker Ring Terminal Washer Internal Lock Terminal OPTION NO

39 REAR WORK LIGHT OPTION (Battery models only) 37 OPTION NO Convoluted Tube (6 ft.) Lamp, 36 VDC Switch

40 38 SPARE PARTS KITS SPARE PARTS KIT - GAS & LP Flap, Broom Door Flap, Broom Chamber (Outer) Flap, Broom Chamber (Inner) Gasket, Broom Door (LH) Gasket, Broom Door (RH) Gasket, Broom Door (LH) Gasket, Broom Door (RH) Gasket, Broom Door (RH) Flap, Wheel Well Seal, Dump Door (Sides) Seal, Broom Chamber/Dump Door Hydraulic Return Filter Element Engine Air Cleaner Element Hopper Panel Filter Engine Oil Filter SPARE PARTS KIT - DIESEL Flap, Broom Door Flap, Broom Chamber (Outer) Flap, Broom Chamber (Inner) Gasket, Broom Door (LH) Gasket, Broom Door (RH) Gasket, Broom Door (LH) Gasket, Broom Door (RH) Gasket, Broom Door (RH) Flap, Wheel Well Seal, Dump Door (Sides) Seal, Broom Chamber/Dump Door Hydraulic Return Filter Element Air Filter (Kubota WG750B) Hopper Panel Filter Engine Oil Filter Fuel Filter Belt, Fan SPARE PARTS KIT - BATTERY Flap, Broom Door Flap, Broom Chamber (Outer) Flap, Broom Chamber (Inner) Gasket, Broom Door (LH) Gasket, Broom Door (RH) Gasket, Broom Door (LH) Gasket, Broom Door (RH) Gasket, Broom Door (RH) Flap, Wheel Well Seal, Dump Door (Sides) Seal, Broom Chamber/Dump Door Hydraulic Return Filter Element Hopper Panel Filter

41 06-5 SPARE PARTS ADDITIONAL SERVICE PARTS - KUBOTA 722 DIESEL PART NUMBER DESCRIPTION Kit, Upper Gasket Gasket, Valve Cover Gasket, Cylinder Head Thermostat Gasket, Thermostat Gasket, Water Pump Hose, Upper Radiator Hose, Lower Radiator Starter Solenoid, Starter Alternator Glow Plug Pump, Fuel Injection Fuel Injector Pump, Electric Fuel Muffler Gasket, Muffler Cap, Oil Fill Ring Gear Radiator Assembly Workshop (Service) Manual Operators Manual Parts Book

42 40 TURN SIGNAL OPTION (IC models only)

43 06-5 TURN SIGNAL OPTION (IC models only) OPTION NO Washer - Bevel Turn Light [ ] A/R Bulb, Turn Signal, Front (Service Part) [ ] A/R Lens, Turn Signal, Front (Service Part) Turn Signal Switch Lens, Turn Signal [ ] A/R Bulb, Turn Signal, Rear (Service Part) Grommet Scr, Hex Thd Form x.50 [ ] = Not Shown

44 42 VAC WAND OPTION (IC models only)

45 06-5 VACUUM WAND OPTION (IC models only) OPTION NO Floor Tool Hose Bracket - Latch Bracket - Storage Wand Section Cap Gasket (6.5 ) Plate - Vac Wand Latch Gasket Screw, 5/16-18 x Slotted Bracket Valve (Gas/LP/Diesel) Hose Assembly Switch Connector - 3-Way Diode Assembly Wire - Bracket #16 AWG Terminal -.25 FISO Decal Decal Decal Bracket, Solenoid Fitting-Elbow 9/16-18 x 9/ Screw - 1/4-20 x.625 HHC HARDWARE USED: H Screw, 1/4-20 x HHC H Nut, 1/4-20, Insert Fiber H Washer,.625 x.281 x.063 H Nut, 5/16-18, Insert Fiber

46 44 VAC WAND OPTION (Battery models only) H46 DRILL HOLES APPLY SEALANT AT TUBE NOTE: REMOVE KNOCKOUTS FROM DEBRIS COVER NOTE: REMOVE EXISTING CLIP-ON GASKET

47 VACUUM WAND OPTION (Battery models only) 45 OPTION NO (BATTERY) Floor Tool Hose Bracket - Latch Bracket - Storage Wand Section Cap Gasket (6.5 ) Plate - Vac Wand Latch Gasket Screw, 5/16-18 x Slotted Switch HARDWARE USED: H Nut, 5/16-18, Insert Fiber

48 46 BATTERY OPTION (Battery models only) H169 H26 GRAY BATTERY CONNECTOR FROM POWER PANEL OPTION NO C1293/ Battery Assembly - Battery Connections Spacer Connector Assembly Spacer Spacer Battery Connector HARDWARE USED: H Nut, 1/4-20 Insert Fiber H Screw, 1/4-20 x HHC

49

50 st Avenue North Plymouth, MN Phone: Fax: American-Lincoln