LOCKS ORB1. Orbit Lock. Whale Tail Compression Lock WTC140, WTP COMPRESSED 68 RELEASED. MATERIAL Stainless Steel 304, Die-Cast Zinc Alloy

Transcription

1 118

2 117

3 Orbit Lock ORB Stainless 304, Die-Cast Zinc Alloy Polished Chrome WEIGHT 1.4kg M6 mounting screws supplied Suitable for tough conditions Fits standard T-lock cutout ACCESSORIES Electronic Actuator Alternate Lock Barrel 3-Way Locking Rods Adjustable. 0mm to 10mm grip range when using included 30mm Bolt Handle Fascia Tongue Rotator Cam mm - 12mm Mount Material Thickness Whale Tail Compression Lock WTC140, WTP140 Cast WTC140 - Chrome Plated WTP140 - Black Powder Coated HOLE FOR 6.35 PADLOCK 60.7 COMPRESSED 68 RELEASED ADJUSTMENT R PANEL RANGE R R

4 Whale Tail Compression Lock W/ Electronic Actuator EWTC140, EWTP140 Cast EWTC140 - Chrome Plated EWTP140 - Black Powder Coated COMPRESSED 68 RELEASED ADJUSTMENT R HOLE FOR 6.35 PADLOCK ACTUATOR PANEL RANGE R R16 Drop T Lock 9/01501, 9/01503, 9/ /01501, 9/ Stainless 9/ /01501 to 9/ Polished 9/ / LH Mixed Keys 9/ LH K/A FS880 9/ LH K/A FS880 Polished die-cast hub, and neoprene seal under stianless cup washer for quality aesthetics, corrosion resistance and weatherproofing. Lift handle to turn latch bar with 5mm cam-form, adjustable through 12mm vertically. Latch travels 90 from centre (rest) position against stop, and is handed LH or RH (non-reversible). Four holes in flanges at 7.5mm diameter. Latch bar is adjusted by 2 X M10 nuts. Polished stainless steel with chrome handle and hub, or zinc plated mild steel. Optional black powder coat. 120

5 Drop T Lock 3 Way 9/01561/01 Stainless handle rod and guide Polished Complete system, supplied with rods and guides. Assembled on site. Can be purchased separately: 3/ Spare rod 1050mm long 3/ Spare guide Drop T Lock - Non-Locking 9/01505, 9/01515, 9/01505, - Stainless 9/01515, - 9/01505, - Polished 9/01515, /01505, 9/ Left Hand Drop-T Non-Locking Latches Identical in function to locking models, but with no lock cylinder and reduced pan dimensions. These are used when no secutrity is required or where free-opening is mandatory (fire equipment, etc) Drop T Lock UES052047, UES052049, UES Stainless Polished UES Keyed alike. UES Keyed differently. UES Keyed alike, concealed fixing. 121

6 Drop T Lock 9/01571/ Stainless Polished mm square shaft to suit. Locking. FS880 8 Drop T Lock MX Zinc plated 150 Strainless steel fascia Vector Compression T-Handles 2750 Series w/ Stainless Handle Stainless Internal Pin Black Powder Coated Ergonomic design and styling (H) 18 Compression style T-handle. Stainless steel spring loaded padlock eye. Compression mechanism supported by roller bearing for smooth actuation. Left to right hand configuration with 180 rotation Vector 3-way drop T. Black powder coated handle with adjustable cam. Rotates 90. Gasket included. 3/16UNC studs. Tamper resistant locking mechanism. Can be used with rods to form a 2 or 3-point latching system. High impact BKV 133 plastic latching housing S1 Vector lock drop T. Black powder coat handle, 1 point adjustable cam w/180 rotation. Integrated PUR seal making handle IP65 rated. Complete with dust shutter. M5 studs Vector lock drop T. Black powder coat handle, 1 point adjustable cam w/180 rotation. Gasket included. Front fixing Gasket, can be purchased separately. 122

7 Push To Close Latch Zinc Alloy Chrome Plated Internal locking and release deadbolt GASKET action. Each lock set includes 2 overmoulded keys (CF301) and all mounting screws except striker plate screws. FRONT HOUSING BACK HOUSING Recessed Paddle w/ Rotor Latch 9/00492, 9/00426 (Striker Pin) 9/00492 Stainless 9/ /00492 Polished 9/00426 The paddle concept provides an attractive fully self-contained lock/latch, which is flush fitting and simple to install. Paddles with 2-step rotary latch The advantage of this new design is that the built-in rotary latch provides very positive slam-action and anti-burst protection, which prevents accidental opening through vibration or impact. Ideal for large mobile items of plant and equipment but not suitable for vehicle personnel doors. -Exceptionally smooth action, strong return on flap to prevent rattle, hardened steel claw and heavy duty locking cam on key cylinder. - Claw slams against striker pin, and is released when paddle flap is lifted -2-stage closing action of claw which is completely blocked when key is turned to locked position. Cannot be locked when claw is in open position. Non-handed, can be reversed. -Stainless models have pierced rim as shown, or internal welded studs. Gasket supplied. - FS as standard, optionally FT, 92, or DLP key types. Non-locking models are available. -Polished stainless steel, or mild steel, bright zinc-plated. Optional black powder-coat finish. -With stainless steel models, case and flap made in Grade 304. All other components mild steel, with die-cast cylinder and locking cam. -Highly competitive against market alternatives. Stainless models with pierced rim (& gasket) 9/00492 Rotary-latch paddle, locking 9/00426 Striker plate 123

8 Recessed Paddle Latch 9/00448/01, 9/00449, 9/00406, Stainless 9/00448/01, 9/ Polished 9/ Raw /00448/01 - Locking 9/ Non-Locking 9/ Loop Striker Bilnd-mounting models have four studs (M6x10mm) welded on inside rim. Striker made in 6mm diameter stainless rod, welded to stainless back plate /00448/01 9/ Flush Paddle Locks 9/00408, 9/00418, 9/00418/01, 9/00418/01/IR Acetal Copolymer Black 9/00408 Non-locking 9/00418 Locking. FS keys are standard 9/00418/01 Keyed alike. Keyed FS 880 9/00418/01/IR A knob for inside release can be fitted to all slam-bolt models. This operates even when paddle has been locked from the outside. (Add suffix IR to part number) 9/00408 Paddles Slam-Bolt Models The paddle concept provides an attractive, fully self-contained lock/ latch, which is flush fitting and simple to install. These are the basic slambolt models, in either pierced rim or with internal welded studs. 9/

9 Anti-Burst Lock 3-Way Key Locking 0881/510 / Stainless Black / SS Paddle Flush Paddle Latch - Non Locking Stainless Polished WEIGHT 220g Flush Paddle Latch - Key Locking K/A Stainless Polished WEIGHT 266g

10 Flush Paddle Latch 0907/ /215S Material Finish Weight Features 0907/ g 0907/ g Interior Release 0907/ g Interior Release - Keyed in Pairs 0907/ g Interior Release, K/A /514 / Stainless Black / SS Paddle 460g Interior Release - Keyed in Pairs 0907/215S / Stainless Black / SS Paddle 461g Interior Release, K/A Flush Paddle Lock 0912/401, 0912/410, 0912/418S, 0912/411 Stainless Polished 0912/401 Non-locking no interior release Weight: 410g 0912/410 Locking no interior release Weight: 470g 0912/ /411 Locking no interior release All keys to pass Weight: 470g 0912/418S Locking with interior release Weight: 470g 126

11 Flush Paddle Latch FU902P/, FU902BB, FU902P/SS, FU902, FU902SS Stainless - FU902P/SS, FU902SS - FU902P/, FU902BB, FU FU902P/, FU902 Black Powder Coated - FU902BB Polished - FU902P/SS, FU902SS A A C/W Gasket FU902P/, FU902P/SS Non Locking FU902, FU902BB, FU902SS Locking Suggested outline of cutout SECTION A-A Flush Paddle Latch - Weatherproof 9/05462, 9/00406 / Acetal Copolymer Black 9/ Stainless steel striker plate The traditional paddle handle has been completely redesigned to make major improvements in function and specification. This new model will not corrode, will resist entry of water and is quickly installed without visible bolts or rivets. Resistant to water-penetration. Same aperture size as standard 4.25 x 5.5 paddles. No visible holes, integral gasket, quickly installed into simple cut-out with U-brackets provided.textured finish with selfcolour, corrosion resistant moulded materials. Hook-latch action with moulded block for smooth and secure engagement. The hook-latch design replaces conventional slam-bolts with a spring-loaded stainless steel hook that projects vertically from the back of the paddle case. This gives a much smoother action; doors close easily against a striker look and do not bounce back. The engagement positively resists vibration. 127

12 Push to Close Latch C2L1BP7, C2L1BP9, C2L1WP7, C2N1BP, C2NF1BP, C2NF1WP Zinc Alloy Black & White Powder Coated Heavy duty, low profile C2L1BP7 Locking, raised trigger, Black Keyed CH GRIP RANGE 1-24mm C2 White C2L1BP9 Locking, raised trigger, Black Keyed SL019 C2L1WP7 Locking, raised trigger, White Keyed CH Non Locking, Flush Trigger Model C2N1BP Non Locking, without lock, Black C2NF1BP Non Locking flush trigger, Black C2NF1WP Non Locking, flush trigger, White Large Compression Latch C5L1BP7, C5L2BP7, C5L2CP7, C5N2BP, C5L3CP7, C5L3BP7, C5L4BP7 Zinc Alloy Black Powder Coat & Chrome Plated Heavy duty, low profile C5L1BP7 Grip range 1-14mm, Locking, Keyed CH751 C5L2BP7 Grip range 15-29mm, Locking, Keyed CH751 C5L2CP7 Grip range 15-29mm, Chrome plated Locking, Keyed CH C5N2BP Grip range 15-29mm, Non-locking C5L3CP7 Grip range 30-45mm, Chrome Plated Locking, Keyed CH751 C5L3BP7 Grip range 30-45mm, Locking, Keyed CH751 C5L4BP7 Grip range 46-57mm, Locking, Keyed CH

13 Lift & Turn Latches 62NBP, 62L1BP7 Zinc Alloy Black Powder Coated GRIP RANGE Environmental sealing is achieved by using a cup gasket and sealing the mounting screw threads. Screw and lockwasher assembly M5 x 16. For door thickness greater than 6 calculate screw length using the following formula: Door thickness +10 Two flat keys provided. 62L1BP NBP COMPRESSION CAM RETAINING CLIP LOCKWASHER PRE-SET NUT SCREW & LOCKWASHER ASSEMBLY M5 FLARED MOUNTING BRACKET Large Compression Lock 10207B-CP, 10207B-BLK B-CP - Chrome Plated 10207B-BLK - Black Powder Coated 57 Grip range 15-30mm Small Compression Lock 10208B-CP, 10208B-BLK B-CP Chrome Plated 10208B-BLK Black Powder Coat 41 Grip range mm

14 Rotor Latches 9/00423 (LH), 9/00424 (RH) Series 400 Anti-Burst Latches The exceptionally neat and compact design of the Series 400 makes it suitable for confined spaces and thin doors. It provides 2-stage anti-burst latching, with mounting through the pivot points for increased strength. Travel 6.5mm Slam-action against striker pin, both hands available. Claw engages pin with 2-stage action, and is released by pull as shown on 2-lobe actuator arm. Clear zinc-plated throughout. Alternative actuator arms to special order. 21 Use with remote-action handles, turn buttons, wire and rod linkages, etc. Anti-Burst Properties When ring-tested, these latches can achieve values in excess of 8-9 KN* transverse load in fully latched condition. However, vehicle builders are responsible for evaluating performance in their own particular application and for ensuring that appropriate legislation is satisfied. *SAE & ECE11 Specification 55 o Rotor Latch Striker Pin 9/00425 Striker pin head 8mm x 4mm deep thread form 14 UNC Class 2A Not handed

15 Coach Bin Door Lock Plastic All other Black Chrome finish Black plastic head All other Coach bin lock complete assembly Lock handle Lock cylinder Lock key Other components to be ordered seperately: Anti burst lock LH Anti burst lock RH Lock striker pin Lock connecting rod black 24 Volt Electric Bin Door Kit , , , Volt central locking unit with key and remote Volt electric bin door kit Handle and solenoid Connector module

16 Push Button Anti Burst Lock 9300/001, 9300/002 Plastic Black 9300/001 Push button handle, keyed in pairs. 9300/002 Push button handle, keyed alike This system is ideal for use on any door, especially tractor cabs etc. This handle is made from very tough plastic and operates by pressing the push button which in turn depresses the lock paddle which then opens the lock rotor. It is fitted by three screws from the inside of the cab door, and is lockable by means of a double side key. The latter has extra protection by way of a dust cover. This handle is primarily used in conjunction with the following anti burst locks. Anti Burst Type Cab Door Lock 9301/001, 9301/002, 9301/S 9301/001 Left Hand 9301/002 Right Hand This door lock is an anti burst type lock and is operated by the above push button handle as well as its own inside integral lever handle, which can very easily be turned into a remote operation, and is supplied complete with striker pin 9301/S 9301/S (Striker pin for above) 132

17 Toilet Door Lock , Polyamide Black WEIGHT 400g Micro switch with sensor: LH RH Without Micro switch: LH 600-E898 - RH Plant On Slam Latch 2115/001, 2115/002 WEIGHT 380g 2115/001 LH 2115/002 RH Left Hand Pressed steel case. Malleable iron tongue. PVC dipped handle. 133

18 Slam Latch - Heavy Duty 9/00805, 9/00806 Yellow Follow bush to take 8mm steel shaft 9/ LH 9/ RH PVC Dipped handle / LH 9/ RH These are plant-on latches with a top-mounted handle, and exceptionally deep steel fellow-push operation by a standard 8.0mm shaft (normally closed off on the inside for visual appearance). Finish is yellow zinc-plated with plack plastic-coated handle. (Chromium-plating to special request only) Internal Slam Latch 0891/001 (LH), 0891/002 (RH) WEIGHT 310g Right Hand Pressed steel case Malleable Iron tongue Cabin Screw-On Lock , , Complete with inner handle, supplied separately Left Hand Cabin Screw-On Locks Finish Left Hand Black Right Hand Handle Black Chrome plated 134

19 Plant On Slam Latch 2121/003, 2121/004 WEIGHT 330g 2121/ /003 Non-locking 2121/004 Locking Pressed steel case. Malleable iron tongue. Slam Latch General Purpose 3/17332, 3/17330 DIMENSION A 3/ mm 3/ mm Pressed case. Malleable Iron tongue 135

20 D-Latch Standard Pattern G3046PZN WEIGHT 240g D-Latch Improved Pattern G3047PZN, G8047PSS G3047PZN G8047PSS WEIGHT G3047PZN G8047PSS SS 165G 176G 136

21 End-Slam Latch 9/01187, 3/ / Stainless 3/ / Raw 3/ Precision-made latches which have become motor-industry standards, with solid, machine-cut steel bolts and quick-fit attachment point if desired. Adjustable bolt-pull allows bolt projection to be varied, and bolts are reversible to nose-up position. Bolt projection variable, 9-16mm. Minimum load 5kg for full bolt travel. Mild steel model made in CR4. Stainless models in grade 304 with stainless bolt-pull, bolt and spring. Slam Latch , Galvanised Spring catch (less hook handle) Spring catch, weight 180g Slam Latch 2467/ Gold passivated WEIGHT 80g

22 Moulded Slam Latch w/ Pull Knob 9/01528, 9/01529, 9/01530 Acetal Copolymer Black The unique design of these latches allows fix through mounting to suit narrow door pillars, sections and channels. Moulded construction provides the benefits of light weight, self-lubricating action, and total corrosion resistance at an inexpensive price. Note: Knob & rivet can be supplied loose, for assembly after latch is installed in panel. 9/01528 Moulded slam latch, reversed knob 9/01529 Moulded slam latch, pulled knob fitment 9/01530 Moulded slam (no knob) Rotary Latch R5NGP Zinc Plated Heavy duty design. Concealed installation. High tensile load. Install with 4 M6 screws or rivets (not supplied) Budget Lock 3/09656, 3/09656SS 3/ /09656SS 316 Stainless 3/ /09656SS Raw Simple dead-bolt latches in which bolt can move 180 completely through the case. 3/09656SS Marine grade S/S 138

23 Hooked Budget Lock 3/16200, 3/ /16200 LH 3/16201 RH Budget Locks UES421024, UES UES UES Left Hand UES Right Hand Budget Lock Key 2257/001, 2257/004 WEIGHT 2257/001 60g 2257/ g 2257/001 83mm 2257/ mm Rust Proof 139

24 Push to Close Latch A31BP, A32BP ABS, SS Spring Black FINGER DEPRESSION 28 DOOR THICKNESS Single hole snap-in installation TOTAL GRIP Corrosion resistant materials 6.5mm A31BP - Suits 1.5mm Door thickness A32BP - Suits 2.0mm Door thickness FRAME LATCH TRAVEL SLIDE SPRING Moulded Budget Lock (Set) 9/01956 Acetal Copolymer Black Self lubricating Comes with matching keeper Budget Lock Escutcheon 9/01960 Acetal Copolymer Black 180 deg opening, no spring return 140

25 Budget Lock Escutcheon 0130/001, 0130/002 Zinc Die-Cast 0130/001 Chrome Plated 0130/002 Black Powder Coated WEIGHT 20g Gravelly Fastener w/ Plate 0662/001 Die-cast Chrome Plated WEIGHT 70g Grip Range 15-30mm Striker Plate - Two Step 1/27107 Zinc Die-Cast step striker for thicker doors/frames with longer depth of travel for full closure. Serrated base

26 Internal Release Handle (Suits CT1178 Series) HA-602H Nylon Inside release handle with fluorescent mushroom head. Refrigeration Door Lock CT with Offset Striker CT-1178/1 - with Flush Striker Chrome Plated H = 90mm - Offset Striker H = 50mm - Flush Striker Chrome slam latch with offset striker adjustable in 2.5mm increments and inside release handle. 6 This latch is widely used for large size insulated enclosures, such as cold stores or containerised units, where a surface-mounted latch is preferrable to avoid breaching the integrity of the door. H Hole for Padlock (7mm) With slam action against a roller striker, this system can be used on doors flush fit against the frame or offset between 35-70mm height. There is an inside safety punch handle for emergency release. 142

27 Striker plate - Two Step 1/27113 (Alt # 2268/001) Zinc Die-Cast Useful 2 step striker with adjustable mounting holes. Use with most slam latches, paddle latches. Serrated base. Striker Plate X1 Zinc Die-Cast CamLock Heavy Duty Weld-On UES0069 Suits 34mm OD Pipe 143

28 CamLock Light Duty Bolt-on - Suit 22mm OD Pipe K CamLock Medium Duty Bolt-on K Suits 27mm OD Pipe CamLock Medium Duty Bolt-on UES0057, AJ0057 Suits 27mm OD Pipe UES Narrow Butt 44mm AJ Wide Butt 53mm 144

29 Magnetic Door Buffer & Holder Black Traction force 500N. Ø27 tube Magnetic Door Buffer & Holder Black Traction force 500N. Ø22 tube 145

30 Recessed Side Door CamLock ART10723 Stainless Polished Handle 29mm for 16mm Diameter Rod Recessed Side Door CamLock ART10116, ART10092 Stainless Polished Handle 35mm for 16mm Diameter Rod ART ART

31 Push Lock ART254 Plastic/Stainless Raw Slam Latch - Heavy Duty Full Assembly Mainly INDIVIDUAL PARTS PH Upper zinc plated steel cam. Weight 0.255kg GH Lock catch. Weight 0.225kg AX Zinc plated steel pin DIA 16mm. Weight 0.27kg CU base grey aluminium finish. Weight 0.5kg PT Inside Teflon trigger. Weight 0.025kg GU Graphite nylon bearing bracket. Weight 0.005kg GO Grooved pin DIA 5mm x 26 self colour steel BA Chrome Plated locking cylinder. Weight 0.75kg PO Zinc alloy handle grey Al finish. Weight kg Cam - Lower, Keeper - Lower PB, GB PB GB - Cast Iron PB GB -Raw WEIGHT PB - 255g GB - 150g PB - Cam, Lower GB - Keeper, Lower. 147

32 Flush Pull Latches M1N1B,-C,-W,-SS; M1L1B,-SS UL94-HB ABS or 316 Stainless Ø Black, White, Cream polymer Satin Finish Stainless ABS Heavy duty design M1N1B - Non Locking Black M1N1C - Non Locking Cream M1N1W - Non Locking White M1N1SS - Non Locking Stainless M1L1B - Locking Black M1L1SS - Locking Stainless M1N1B, M1N1C, M1N1W, M1L1B - Grip range 0-8 mm M1N1SS, M1L1SS - Grip range 0-7 mm Stainless For 12mm - 20mm applications use bracket M1WBK Bus Door Handle Kit VOLDDL Mild Stainless Turnbuckle & Nuts Zinc Plated & Grey P/C For use in bus door locks

33 Push Button Latch 93NB, 93LB7 ABS Body; SS304 Keeper & Washer Black Push button opening with a single hole installation. 93NB - Non Locking 93LB7 - Locking CH Compartment Locks 1/27900, 1/27900/12, 1/27902, 1/27900/24 Zinc Die-Cast Chrome Plated 1/ Mixed Keys 1/27900/12 - K/A FS901 1/ K/A FS880 1/27900/24 - FS

34 Compartment Locks CML1CP7 CML1CP7-AC CML1CP7-CW CML2CP7-AW CML2CP7-CW CMN2BPW-CW Chrome Plated Chrome Plated Chrome Plated Chrome Plated Black P/C Anti-clockwise Clockwise Anti-clockwise Clockwise Wing Head GRIP 16mm 16mm 22mm 22mm 22mm GRIP 6-26mm 6-26mm 12-32mm 12-32mm 12-32mm Keyed CH Grip Supplied with 2 cams 40 Wing Head Clip N Turn , , POM Black GRIP (H) mm mm mm Quick tool-less assembly Panel thickness: Up to 4mm for 13.5mm and 18mm Up to 6mm for 25mm 150

35 E3 Compression Latch Keys Die-cast Zinc Alloy Compatible With: Chrome Plated ADAPTABLE to E3, E5 E3K7S - 7mm Square Driver E3K7T - 7mm Triangle Driver E3K8S - 8mm Square Driver E3K9R - 9mm Round Driver E3K3B - 3mm Double Bit UES E3 UES E5 8mm Square 7mm Square Round Double Bit 7mm Triangle E3 Compression Latch Die-cast Zinc Alloy Chrome Plated (E3L1CPXX) Black (E3L1BPXX) E3L1BP7S - 7mm Square Driver - Black E3L1BP7T - 7mm Triangle Driver - Black E3L1BP8H - 8mm Hex Driver - Black E3L1BP8S - 8mm Square Driver - Black E3L1BP9R - 9mm Round Driver - Black E3L1BPTH7 - T-Handle Locking Head Black E3L1CPTH7 - T-Handle Locking Head Chrome E3L1CP3P - Double Bit 3mm Driver Chrome E3L1BPDS - Slot Driver - Black E3L1BPWH - Wing Head Driver - Black E3L1SS7T - Stainless 7mm Triangle Driver - Black E3L1SS8H - Stainless 8mm Hexagon Driver - Black Double Bit 7 or 8mm Square 7mm Triangle UES KEY (Sold Separately). 9mm Round Slotted Head Wing Head ALL LATCHES COME WITH 3 CAMS OFFERING A GRIP RANGE OF 12MM - 81MM Double Bit Chrome 7mm Triangle SS 151

36 E5 Latch E5L1BP7S, E5L1BP7T Die-cast Zinc Alloy 20 Chrome Plated 0.5 Gasket E5 Head Key Styles E5L1BP7S - 7mm Square Driver E5L1BP7T - 7mm Triangle Driver 7 Ø LATCHES COME WITH 4 CAMS OFFERING A GRIP RANGES OF 6.5MM, 11.5MM, 15.5MM + 18MM 7 Ø mm Square 7mm Triangle Key 9mm Round E3SK9R 2.1 R5 R Zinc Plated Suits small E3S latch Quarter Turn Latch E5N1BPWH Zinc Plated, Black P/C Wing Head Supplied with 4 cams Grip Range: 7mm 10mm 12mm 20mm 20 Grip Range

37 Vibration Resistant Quarter-turn Fastener QT18 Zinc Die-Cast Chrome Plated Vibration resistant Assebled to IP 65/Nema 4 Complete with earth nut Zinc die-cast housing CP 32mm diamater X 18mm Fastener for any application requiring a quarter turn action to secure doors etc. The cam snaps in at the open and closed positions, preventing unintentional opening of the fastener due to vibrations. Cams sold separately Quarter-turn Latches We have a complete range. Please ask us for details if your application is not shown. P/N without projection H in mm 3mm Double Bit 5mm Double Bit 7mm Square 7mm Triangle 8mm Square-Slotted 8mm Square 8mm Triangle Slotted Quarter Turn Lock - 8mm Square QT18-8S-SS Stainless Polished Stainless steel quarter-turn fastener for applications where high corrosion resistance is required. Acid proof steel quality for extreme environments. The fastener can be installed assembled with cam. Handles and knobs an be used in combination with insert square 8/M6. 153

38 Cam Lock - Keyed Alike NAL-D Brass Body, Key and Cam Chrome Body, Nickel Finish Key Brass cylinder tubular lock cam. 90 cam rotation. Key is removable in locked position only. Keyed alike. Cut Out Dimensions Cam Lock - Mini - Keyed Alike NAL-S Zinc Alloy Chrome 90 cam rotation. Cam is reversible. NAL-S-1 : Key withdraws in locked position only (key works as a knob in unlocked position) NAL-S-2 : Key withdraws in both locked and unlocked positions NAL-S CAP : Black polythylene cover for dust Cut Out Dimensions 154