Stirrup-shaped handles, machine handles, apparatus handles
|
|
- Laurence Brown
- 5 years ago
- Views:
Transcription
1 Stirrup-shaped handles, machine handles, apparatus handles 231
2 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles K Order No. Order No. A D D1 D2 H R T Load tumbled tumbled bearing plastic-coated, black capacity N K K M K K M K K M K K M K0187 Stirrup-shaped handles Black duroplastic PF 31; bush in brass or in galvanized steel Deburred and high-polish finish K KIPP Stirrup-shaped handles 232 Order No. Bush material Load bearing Approx. capacity weight N K brass 300 0,180 K galvanized steel 300 0,180
3 K0188 Stirrup-shaped handles min. 14 Duroplastic PF 31, black. Bush brass or steel galvanized Deburred and high-polish finish K KIPP Stirrup-shaped handles Order No. Bush material Load bearing Approx. capacity weight N K brass 500 0,180 K galvanized steel 500 0,180 Notes 233
4 K0189 Stirrup-shaped handles Form A Thermoplastic; bush in brass Handle and handle cap in black K On request: Other handle or handle cap colours. Form B KIPP Stirrup-shaped handles 234 Order No. Form A B B1 D D1 H L L1 S T T1 T2 Approx. weight K A 93, M ,5 67,5 5, ,5 0,049 K A M , ,5 0,086 K A M , ,080 K A M , ,5 0,098 K A M , ,091 K A M , ,147 K B 93, , ,5 67,5 5,8 4,5 19-0,032 K B ,5 13, , ,041 K B ,5 13, , ,059 K B ,5 13, , ,087
5 K0190 Stirrup-shaped handles Thermoplast PA (polyamide), glass-bead reinforced or PP (polypropylene), fibreglass reinforced. anthracite grey K The fastening hole is designed in such a way that the stirrup-shaped handles can be secured from the operating side with a socket head screw or a hexagon nut. On request: Other handle colours. KIPP Stirrup-shaped handles Order No. Surface finish A B C D H L L1 SW T T1 Load bearing capacity N K thermoplastic PA 94 ±0, , K thermoplastic PA 117 ±0, K thermoplastic PA 132 ±0, K thermoplastic PA 179 ±1, K thermoplastic PP 94 ±0, , K thermoplastic PP 117 ±0, K thermoplastic PP 132 ±0, K thermoplastic PP 179 ±1,
6 K0191 Stirrup-shaped handles Form A Ø15 Glass bead reinforced thermoplastic H C Matt black or orange 13 4 Ø9 L1 for socket head screw M8 DIN 912 B K Dimension A applies after mounting. Before mounting it can be up to 2 mm smaller due to the release of the bending stress. A L Form B 13 H 9,6 C Ø6,6 L1 for countersunk screw M6 DIN 7991 B A L KIPP Stirrup-shaped handles 236 Order No. Order No. Form A B C H L L1 Load Approx. matt black orange bearing weight capacity N K K A ,053 K K A ,058 K K A ,074 K K B ,056 K K B ,061 K K B ,076
7 K0192 Bow handles Form A without cover cap D1 B1 Glass-ball reinforced thermoplastic. matt black. K H1 H Ergonomic and functional bow handles with temperature resistance of -50 C to +130 C. H2 D L1 A L M B Delivery includes black socket head cap screws DIN 912, nuts DIN 934 and galvanized washers DIN 125 as well as caps. The versions K and K are supplied without cover caps. Form B with cover cap D1 cover cap B1 H2 H1 H L1 D A L M B KIPP Bow handles Order No. Form A B B1 D D1 H H1 H2 L L1 M Load bearing capacity N K A M6x K A M6x K B M8x K B , M8x
8 K0193 Bow handles Glass-ball reinforced thermoplastic. Form A with base plate D1 B2 matt black. K cover cap base plate H1 H Ergonomic and functional bow handles with temperature resistance of -50 C to +130 C. H2 D L1 A L M B1 B Delivery includes black oxide finish socket head cap screws DIN 912, nuts DIN 934 and galvanized washers DIN 125 as well as caps. The versions K and K are supplied without cover caps. Form B without base plate D1 B2 cover cap H1 H2 H D L1 M A B1 L KIPP Bow handles 238 Order No. Surface finish Form A B B1 B2 D D1 H H1 H2 L L1 M Load bearing capacity N K without cover cap A M6x K with cover cap A M6x K with cover cap A , , M8x K without cover cap B M6x K with cover cap B M6x K with cover cap B , , M8x30 600
9 K0194 Bridge handle Material, surface finish: Anthracite grey thermoplastic K KIPP Bridge handle Order No. D D1 A B C E H L R R1 S T Approx. weight K ,5 10, ,5 0,037 K0195 Stirrup-shaped handles Profile aluminium EN AW-6060 High quality anodized version, glass-ball blasted, semi-matt finish K KIPP Stirrup-shaped handles Order No. Surface finish A B D H H1 L S T Load Approx. bearing weight capacity N K black anodized M ,145 K black anodized M ,220 K natural colour anodized M ,145 K natural colour anodized M ,
10 K0196 Stirrup-shaped handle Material, surface finish: Anthracite grey thermoplastic; bush in brass. K KIPP Stirrup-shaped handle Order No. D A B C E H L R T Approx. weight K M , ,045 K0197 Slanting stirrup-shaped handles 30 Ø24 60 Grip in glass-ball reinforced thermoplastic; threaded bush in brass M Matt black or light grey K Slant compact polyamide handle. Handle tube and handle foot are one unit. With its slanted contact surfaces, assembly is also possible under cramped spacial conditions. KIPP Slating stirrup-shaped handles 240 Order No. Colour Load bearing Approx. capacity weight N K matt black ,148 K light grey ,148
11 K0171 Stirrup-shaped handles with soft inner surface 25,5 Hard component in glass-ball reinforced thermoplastic; soft component in SEBS 53 Hard component matt black; soft component basalt grey M8x K Heavy-duty polyamide handle. Excellent carrying and gripping comfort thanks to its soft inner surface. Black galvanized cylindrical screws, nuts and washers are supplied. For wet areas, the fastening material is supplied in refined steel (1.4301) On request: With and without individual inscription, embossed or raised. Hard component and soft component are available in all RAL colours. KIPP Stirrup-shaped handles with soft inner surface Order No. Surface finish Load bearing Approx. capacity weight N K ,186 K for wet areas 500 0,
12 K0198 Stirrup-shaped handles stainless steel stainless steel view A-A Form A Precision cast stainless steel , Fasteners made of Form B Abrasive cleaned and matt gloss electropolished. K KIPP Stirrup-shaped handles, stainless steel Order No. Form A B D H H1 L S T Load Approx. bearing weight capacity N K A M8x ,550 K A M10x ,460 K B M8x ,550 K B M10x ,460 Notes 242
13 K0199 Stirrup-shaped handles EN AW-6060 Form A natural colour anodized Form B black anodized Form C titanium colour powder coated Matt-finished and anodized or powder-coated K KIPP Stirrup-shaped handles Order No. Order No. Order No. A B C C1 D H S T Load Approx. Form A Form B Form C bearing weight capacity N K K K ,5 22 M ,127 K K K M ,193 K K K ,5 28 M ,293 K0200 Stirrup-shaped handles KIPP Stirrup-shaped handles Material, surface finish: Glass bead reinforced thermoplastic; matt black with fine texture K These handles possess extreme torsional strength and are highly operator friendly. Fastening screws, nuts and flat washers are supplied. For wet areas, the fastening screws, nuts and flat washers are supplied in refined steel. Order No. Order No. A B C C1 C2 D H S T Load Approx. - for wet areas bearing weight capacity N K K , M5x ,049 K K , ,5 M6x ,088 K K M8x ,158 K K , ,5 M8x ,212 K K , M10x ,
14 K0201 Stirrup-shaped handles round Round aluminium Ø10 Surface matt-finished and natural colour or black anodized 1 M5 A K End washers not included. KIPP Stirrup-shaped handles round 244 Order No. Surface finish A Load Approx. Order No. bearing weight end washer capacity N K black anodized ,023 K K black anodized ,029 K K black anodized ,032 K K black anodized ,037 K K black anodized ,049 K K black anodized ,053 K K black anodized ,063 K K black anodized ,067 K K natural colour anodized ,023 K K natural colour anodized ,029 K K natural colour anodized ,032 K K natural colour anodized ,037 K K natural colour anodized ,049 K K natural colour anodized ,053 K K natural colour anodized ,063 K K natural colour anodized ,067 K0201.3
15 K0202 Oval bow handles Oval aluminium Surface matt-finished and natural colour anodized or black anodized KIPP Oval bow handles K Order No. Order No. A L Load Approx. Black anodized natural colour anodized bearing weight capacity N K K ,024 K K ,030 K K ,032 K K ,037 K K ,050 K K ,055 K K ,064 K K ,068 Notes 245
16 K0203 Stirrup-shaped handles round plastic coating KIPP Stirrup-shaped handles round Order No. A Load Approx. bearing weight capacity N K ,075 K ,097 K ,105 K ,106 K ,114 K ,118 K ,128 K ,157 K ,170 K ,193 K ,203 Round steel Surface very finely ground and matt-polish chromiumplated; connecting bridge with plastic coating K High quality handles for front panels and similar applications. K0204 Oval bow handles view A-A KIPP Oval bow handles Order No. Order No. A D D1 D2 H T Load black powder-coated natural colour anodized bearing capacity N K K M6 21/ K K M6 21/ K K M6 21/ K K M6 21/ K K M6 21/ K K M8 25/ K K M8 25/ K K M8 25/ K K M8 25/ K K M8 25/ K K M8 25/ K K M8 25/ Oval aluminium EN AW-6060 Black powder-coated, natural colour anodized K These handles are extremely robust and can be used where heavy duty equipment is called for.
17 K0205 Flat profile bow handles Profile aluminium EN AW-6060 view A-A Matt-finished, black or natural colour anodized K These elegant flat profile bow handles made of aluminium are especially suitable for machines, appliances, apparatuses, jigs and fixtures, etc. KIPP Flat profile bow handles Order No. Order No. A D T Load Approx. black anodized natural colour anodized bearing weight capacity N K K M ,085 K K M ,100 K K M ,120 K K M ,190 K0206 Stirrup-shaped handles in stainless steel stainless steel D1 Handle stainless steel , Fasteners made of T D Electropolished. view A-A K KIPP Stirrup-shaped handles in stainless steel Stainless steel pull handles are used mainly on equipment in the medical and food industry as well as in laboratories and neuclear technology. Order No. A D D1 H T Load Approx. bearing weight capacity N K M5x ,060 K M5x ,100 K M5x ,185 K M5x ,
18 K0207 Angled machine handles Round steel Very finely ground and high-polish chromium-plated K KIPP Angled machine handles Order No. H S Load bearing Approx. capacity weight N K ,190 K ,287 K0208 Stirrup-shaped handles in stainless steel stainless steel KIPP Stirrup-shaped handles in stainless steel view A-A Stirrup-shaped handle in stainless steel , fastening material Vibratory ground satin surface finish K Order No. A B D D1 H R T Load Approx. bearing weight capacity N K M5x ,105 K M5x ,118 K M5x ,138 K M5x ,158 K M5x ,205 K ,5 M6x ,216 K ,5 M6x ,241 K ,5 M6x ,279 K ,5 M6x ,318 K ,5 M6x ,407
19 K0209 All-purpose machine handles KIPP All-purpose machine handles view A-A Order No. A B Load Approx. bearing weight capacity N K ,552 K ,575 K ,620 K ,695 K ,732 K ,758 K ,815 K ,895 Aluminium Grip leg black powder-coated; connecting bridge natural colour anodized K Black galvanized fastening screws with hexagon socket M12x70 as well as suitable washers and nuts are supplied. K0210 Lightweight handles KIPP Lightweight handles Form A connecting tube ground and natural colour anodized Form B connecting tube with serrated plastic coating Order No. Order No. A B Load Approx. Form A Form B bearing weight capacity N K K ,165 K K ,175 K K ,185 K K ,200 K K ,210 K K ,220 K K ,245 K K ,270 Grip legs in black glass-ball reinforced thermoplastic; connecting tube aluminium K The grip legs have 4 clamping webs within the area of the tube receiver. When pushing the connecting tube in, they are abraded and produce a seat with a precise fit. Black galvanized fastening screws, as well as suitable washers and nuts are supplied. 249
20 K0211 Tube handles A-20 mm Connecting bridge in aluminium EN AW-6060; grip leg in polyamide glass-ball reinforced; threaded bush in brass; clamping sleeves in stainless steel Connecting bridge natural colour or black anodized; grip leg aluminium colour or black M8 A K Pluggable oval-profile handles. Versions with plastic legs and aluminium oval bridge. B KIPP Tube handles Order No. Order No. Order No. A B Load Approx. Connecting bridge, natural colour Connecting bridge, natural colour Connecting bridge, black bearing weight anodized, grip leg aluminium colour anodized, grip leg black anodized, grip leg black capacity N 250 K K K ,255 K K K ,295 K K K ,334 K K K ,414 K K K ,493
21 K0212 Slanting tube handles Ø30x1,5 Connecting tube in aluminium EN AW-6060; grip leg in polyamide, glass-ball reinforced; threaded bush in brass 45 9 Connecting tube matt-polished anodized; grip leg black M6 A K Slanting tube handles in modern industrial design. Precision fit of tube on plastic tenon due to clamping webs. B KIPP Slanting tube handles Order No. A B Load Approx. bearing weight capacity N K ,112 K ,130 K ,148 K ,165 K ,184 K ,
22 K0213 Apparatus handles Form A Profile aluminium EN AW-6060 Matt-finished, black anodized or natural colour anodized K view A-A Form B view B-B KIPP Apparatus handles 252 Order No. Form Surface finish Load bearing Approx. capacity weight N K A black anodized 500 0,070 K B black anodized 300 0,010 K A natural colour anodized 500 0,070 K B natural colour anodized 300 0,010
23 K0214 Stirrup-shaped handles, high-polish chromium-plated blend washer view A-A Steel Very finely ground and high-polish chromium-plated K These stirrup-shaped handles are used primarily on optical devices, laboratory installations, audio, video and hi-fi equipment, etc. The bearing washers are supplied unattached. On request: Other surface finishes. KIPP Stirrup-shaped handles, high-polish chromium-plated Order No. A D D1 D2 H T Load Approx. bearing weight capacity N K M ,008 K M ,010 K M ,013 K M ,015 K M ,018 K M4 8 12, ,028 K M4 8 12, ,038 K M4 8 12, ,041 K M4 8 12, ,050 K M4 8 12, ,056 K M4 8 12, ,057 K M4 8 12, ,058 K M4 8 12, ,065 K M4 8 12, ,068 K M4 8 12, ,071 K M ,067 K M ,087 K M ,094 K M ,095 K M ,103 K M ,105 K M ,112 K M ,142 K M ,154 K M ,175 K M ,
24 K0215 Stirrup-shaped handles, in stainless steel stainless steel Form A front mounted Handle stainless steel Fasteners made of Ground and satin brushed finish. K These stainless steel pull hanles are ideal for all technical applications where highest load and high chemical or corrosive resistance is required. Form B rear mounted KIPP Stirrup-shaped handles, in stainless steel 254 Order No. Form A Load bearing Approx. capacity weight N K A ,035 K A ,157 K B ,035 K B ,157
25 K0216 All-purpose apparatus handles Form A serrated nut Aluminium connecting bridge; grip legs in glass-ball reinforced polyamide Grip legs, half-matt with fine structure, black; connecting bridge matt-finished and natural colour or black anodized K Form B view A-A serrated nut rung length = A + 12 mm KIPP All-purpose apparatus handles Order No. Order No. Form A L Load black anodized natural colour anodized bearing capacity N K K A K K A K K A K K A K K A K K A K K B K K B K K B K K B K K B K K B
26 K0217 All-purpose apparatus handles Connecting bridge in aluminium; grip leg in high-strength plastic K bridge length = A KIPP All-purpose apparatus handles The centre distance can be adjusted by shortening the connecting bridge. Order No. Order No. A B Load Approx. connecting bridge connecting bridge bearing weight black anodized natural colour anodized capacity N K K ,026 K K ,030 K K ,032 K K ,035 K K ,044 K K ,053 K0218 Measurement device handles Form A fine ground and high gloss chrome-plated Form B same as form A, grip with smooth plastic sleeve Form C stainless steel, vibratory finished Steel or stainless steel Fine ground and high gloss chrome-plated; Form B grip with smooth plastic sleeve; Form C semi-matt, score-free vibratory finished K (folded out) Galvanized flat washers and nuts are supplied. Form C fastening material in stainless steel. Spring lock in both end positions. KIPP Measurement device handles 256 Order No. Order No. Order No. A Load Approx. Form A Form B Form C bearing weight capacity N K K K ,135 K K K ,160 K K K ,215
27 K0219 Angled draw-pull handles Aluminium Matt-finished, black anodized or natural colour anodized K KIPP Angled draw-pull handles Order No. Order No. A Load Approx. black anodized natural colour anodized bearing weight capacity N K K ,037 K K ,045 K K ,058 K0220 Bowed tube handles Form A connecting tube natural colour anodized Form B connecting tube black anodized Material, surface finish: Grip legs in black glass-ball reinforced thermoplastic; connecting tube aluminium, anodized K The grip legs are pinned to the aluminium connecting tube. Black galvanized cylindrical screws with hexagon socket, nuts and washers are supplied. KIPP Bowed tube handles Order No. Order No. A Load Approx. Form A Form B bearing weight capacity N K K ,361 K K ,410 K K ,451 K K ,493 K K ,
28 K0221 Tube handles Form A connecting tube ground and natural colour anodized KIPP Tube handles Form B connecting tube with serrated plastic cover Order No. Order No. A B Load Approx. Form A Form B bearing weight capacity N K K ,170 K K ,175 K K ,190 K K ,205 K K ,220 K K ,235 K K ,270 K K ,300 Grip legs in black glass-ball reinforced thermoplastic; connecting tube aluminium EN AW-6060 K The grip legs have four clamping webs within the area of the tube receiver. When pushing the connecting tube in, they are abraded and produce a seat with a precise fit. Black galvanized fastening screws as well as suitable washers and nuts are supplied. K0222 Tube handles KIPP Tube handles 258 Form A connecting tube ground and natural colour anodized Form B connecting tube with serrated plastic cover Form C connecting tube in stainless steel, finely ground Order No. Order No. Order No. A B Load Form A Form B Form C bearing capacity N K K K K K K K K K K K K K K K K K K Grip legs in black glass-ball reinforced thermoplastic; connecting tube aluminium EN AW-6060 or stainless steel K The grip legs have four clamping webs within the area of the tube receiver. When pushing the connecting tube in, they are abraded and produce a seat with a precise fit. Black galvanized fastening screws as well as suitable washers and nuts are supplied.
29 K0223 Tube handles Form A Connecting tube, aluminium EN AW-6060; grip legs in glass-ball reinforced polyamide Connecting tube natural colour anodized or with serrated plastic cover K The grip legs have two/ four three-square PVC profiles within the area of the tube receiver. These three-square PVC profiles are abraded when the connecting tube is inserted (push fit). In this way an exact fit is generated. Black galvanized fastening screws as well as suitable washers and nuts are supplied. Form B KIPP Tube handles Order No. Order No. Form A L Load Approx. natural colour anodized serrated plastic cover bearing weight capacity N K K A ,118 K K A ,135 K K A ,167 K K A ,200 K K A ,232 K K B ,118 K K B ,135 K K B ,167 K K B ,200 K K B ,
30 K0652 Tube handles in stainless steel stainless steel A + 15 mm 32 R 20 Connecting tube stainless steel Grip legs in precision cast G Fastening material in stainless steel Clamping and sealing rings in food-grade silicone rubber. Temperature resistant in the long-term from -60 C to +200 C. 5 M6 x 6 ø 30 x 1,5 A M8 x 25 Connecting tube finely ground. Grip legs blasted and electro-polished with matt-gloss finish. K L 48 All-purpose pluggable tube handles in stainless steel. Splash-proof tube-leg connection. Additional tube clamping by means of a grub screw with a hexagon socket. For screw assembly in the front or from behind. Easy to clean, especially suitable for food industry. KIPP Tube handles in stainless steel 260 Order No. A L Load bearing capacity N K K K K K K
31 K0224 Tube handles Tube holder and tube cap in glass-ball-reinforced polyamide; connecting tube aluminium EN AW-6060 Connecting tube finely ground and black anodized or natural colour anodized; tube holder and tube cap semi-matt with fine texture, black K Tear-out-resistant screw connection between handle holder and tube by non-releasing blind rivet nut. KIPP Tube handles Order No. Surface finish A L Load bearing Approx. capacity weight N K black anodized ,211 K black anodized ,228 K black anodized ,245 K black anodized ,280 K black anodized ,315 K natural colour anodized ,211 K natural colour anodized ,228 K natural colour anodized ,245 K natural colour anodized ,280 K natural colour anodized ,
32 K0225 Tube handles Connecting tube stainless steel ; fastener die-cast aluminium; glass-ball reinforced end cap; screws and steel clamping device Connecting tube finely ground; fastener black powder-coated; end cap black; screws and clamping device galvanized and chromated K High load rating tube handles for mechanical and process equipment engineering. Easy mounting of components from front side. Any screw distance possible for same handle length. clamping diagram, holder: KIPP Tube handles 262 Order No. A B E L Load Approx. bearing weight capacity N K ,847 K ,029 K ,212 K ,395 K ,577
33 K0226 Tube handles Grip legs in glass-ball reinforced thermoplastic; connecting tube stainless steel ; inserts stainless steel screw head insert or threaded insert Grip legs with fine structure, black; connecting tubes, finely ground; inserts, finely lathed Form A screw head insert Form B threaded insert K Precision fit of tube on plastic tenon due to clamping webs. Splash-proof by o-rings. Different fastening inserts allow screwing on from the front, from the rear or one with the other (as a double handle). Handles with screw head insert are supplied with fastening material in refined steel. Handles with threaded insert are supplied without screws. KIPP Tube handles Order No. Form A L Load bearing Approx. capacity weight N K A ,853 K A ,934 K A ,016 K A ,179 K A ,341 K B ,813 K B ,894 K B ,976 K B ,139 K B ,
34 K0227 Tube handles in stainless steel stainless steel Form A front mounted Form B rear mounted M8x35 A-80 mm 22 Ø20x2 A A-80 mm Ø20x Connecting tube and fasteners made of stainless steel , Handle shank precision cast Connecting tube finely ground or with ribbed black plastic sleeve. Shanks abrasive cleaned and matt gloss electropolished. K Socket head screws with nuts and washers are supplied for tube handles Form A. Hexagon head screws and suitable washers are supplied for tube handles Form B. A M8x L 53 KIPP Tube handles in stainless steel 264 Order No. Form Surface finish A L Load Approx. bearing weight capacity N K A tube ground ,680 K A tube ground ,775 K A tube ground ,865 K A tube with plastic cover ,680 K A tube with plastic cover ,775 K A tube with plastic cover ,865 K B tube ground ,710 K B tube ground ,800 K B tube ground ,900 K B tube with plastic cover ,710 K B tube with plastic cover ,800 K B tube with plastic cover ,900
35 K0228 Machine handles view A-A Grip leg and connecting bridge in aluminium EN AW-6060; connecting pins in stainless steel Grip leg and connecting bridge finely ground, black anodized or natural colour anodized KIPP Machine handles Order No. Order No. A L Load Approx. black anodized natural colour anodized bearing weight capacity N K K ,555 K K ,618 K K ,742 K K ,867 K K ,992 K The solid construction also permits this handle series to be used as edge protection. K0229 Control panel handles KIPP Control panel handles Order No. A D Load Approx. Order No. bearing weight end washer capacity N K ,240 K K ,270 K K ,300 K K ,350 K K ,520 K Round aluminium EN AW-6060 Ground, glass-ball blasted and matt-polish black anodized K End washers not included. On request: Any handle length. 265
36 K0230 Machine handles Form A Round steel Ground, brushed and matt-finish chromium-plated or black powder-coated with fine texture K Available as simple stirrup-shaped handle or angled. Form B KIPP Machine handles 266 Order No. Form Surface finish A Load bearing Approx. capacity weight N K A matt-finished chromium-plated ,150 K A matt-finished chromium-plated ,525 K A black powder-coated ,150 K A black powder-coated ,525 K B matt-finished chromium-plated ,680 K B matt-finished chromium-plated ,810 K B matt-finished chromium-plated ,930 K B matt-finished chromium-plated ,060 K B black powder-coated ,680 K B black powder-coated ,810 K B black powder-coated ,930 K B black powder-coated ,060
37 K0231 Bighand view A-A Secure gripping with the Novo Grip Bighand. This design supports the tailor-made gripping position and its universal alteration of handle orientation takes the requirements of application masterly into account. Material, surface finish: Rhombus shaped end pieces in anthracite grey thermoplastic, oval tube in aluminum, coated or anodized K (oval tube colour raspberry red) The diamond corner covers are supplied unassembled. Optional supply: set of M10 bolts for mounting options 1+2, a set of wood screws diameter, M5 with dowel, a drill template and assembly tool for option 3. Δ Add the desired colour code here. No colour code is required with anthracite grey oval tubes. On request: Length A in stepped special lengths. colour codes: anthracite grey RAL 7021 anodized black = 01 anodized natural = 03 ruby red = 27 RAL 3003 raspberry red = 70 RAL 3027 ocean blue = 73 RAL 5020 KIPP Bighand Order No. Order No. A Variation 1+2 Variation 3 Socket head screw DIN 912 Hexagonal-woodsrcew DIN 571 K Δ K Δ 180 K Δ K Δ 200 K Δ K Δ 250 K Δ K Δ 300 K Δ K Δ 350 K Δ K Δ 400 K Δ K Δ 500 K Δ K Δ 600 Mounting variations variation 1 variation 2 variation 3 267
38 K0232 Ledge handles Form A L Profile aluminium EN AW Profile aluminium vibration ground, matt-finished and natural colour or black anodized K M4 A 7,5 All-purpose ledge handles. Form A can also serve as an excellent edge protection. 8 On request: Any other lengths. M4 Form B A 7, L KIPP Ledge handles Order No. Order No. Form A L Load Approx. natural colour anodized black anodized bearing weight capacity N 268 K K A ,027 K K A ,034 K K A ,054 K K A ,063 K K A ,072 K K A ,081 K K B ,032 K K B ,035 K K B ,055 K K B ,080 K K B ,093 K K B ,106
39 K0130 Angled handles Form A natural anodized Form B black anodized Profile aluminium EN AW-6060; end caps in black thermoplastic Profile aluminium matt-polished anodized K Among other things, angled handles are used for sliding doors and technical installations. As an alternative, this handle is also suitable as edge protection. middle tapped hole only L > 400 mm KIPP Angled handles Order No. Form L M Load bearing capacity N K A K A K A K A K A K A K B K B K B K B K B K B K B K B
40 K0233 Ledge handles in stainless steel stainless steel Profile in refined steel, stainless steel Blasted and electro-polished with matt-gloss finish K On request: Any other lengths. view A-A KIPP Ledge handles in stainless steel 270 Order No. A L Load bearing Approx. capacity weight N K ,248 K ,310 K ,373 K ,467
41 K0234 Angled profile handles Form A Profile aluminium EN AW-6060 Profile aluminium matt-polish anodized K Angled profile handles are available with internal thread M6 or with through hole for M5 countersunk screws for side mounting. Form B KIPP Angled profile handles Order No. Form Surface finish A L Load Approx. bearing weight capacity N K A black anodized ,189 K A black anodized ,203 K A black anodized ,233 K A natural colour anodized ,189 K A natural colour anodized ,203 K A natural colour anodized ,233 K B black anodized ,189 K B black anodized ,203 K B black anodized ,233 K B natural colour anodized ,189 K B natural colour anodized ,203 K B natural colour anodized ,
42 K0131 Machine handles Form A Form B Grip legs and connecting bridge in aluminium profile EN AW-6060; connecting pins in refined steel Grip legs glass-ball blasted and semi-matt finish black anodized: connecting bridge matt-finished and natural colour anodized, black anodized or titan colour powder-coated K Form C The machine handles are characterized by solid construction and high load rating. Hexagon head screws M8x16, DIN 933 galvanized and flat washers DIN EN ISO 7089 galvanized are supplied. KIPP Machine handles, Form A 272 Order No. Order No. Order No. A L Load Approx. connecting bridge connecting bridge connecting bridge bearing weight black anodized titan colour powder-coated natural colour anodized capacity N K K K ,555 K K K ,690 K K K ,824 K K K ,959 KIPP Machine handles, Form B Order No. Order No. Order No. A L Load Approx. connecting bridge connecting bridge connecting bridge bearing weight black anodized titan colour powder-coated natural colour anodized capacity N K K K ,509 K K K ,657 K K K ,778 K K K ,913 KIPP Machine handles, Form C Order No. Order No. Order No. A L Load Approx. connecting bridge connecting bridge connecting bridge bearing weight black anodized titan colour powder-coated natural colour anodized capacity N K K K ,479 K K K ,614 K K K ,748 K K K ,882
43 K0132 Angled leg handles Grip legs EN AW-6060, extruded; leg insert, glass-ball reinforced thermoplastic; connecting tube EN AW-6060 Grip legs, matt-polish black anodized; leg insert, black; connecting tube, finely ground and anodized or powder-coated or with serrated plastic cover, black grip insert K The components of the insert system shown can be supplied as complete handles or as preassembled grip and connecting legs for tube orders by customers. The connection between leg and connecting tube is splash-proof and absolutely tight. On request: Angled leg handles with connecting part (when larger distance between grip legs). KIPP Angled leg handles Order No. Order No. Order No. Order No. A L Load connecting tube connecting tube connecting tube Connecting tube bearing natural colour anodized black anodized black powder-coated black serrated plastic cover capacity N K K K K K K K K K K K K K K K K K K K K K K K K K K K K
44 K0235 Angled leg handles A-8 mm R7 Connecting tube in aluminium EN AW-6060 or stainless steel ; grip leg in polyamide, glass-ball reinforced; threaded bush in brass 33 Connecting tube natural colour, black anodized or finely ground stainless steel; grip leg matt black M K A 17 Precision fit of tube on plastic grip leg due to clamping webs. Ø12x1 B KIPP Angled leg handles 274 Order No. Surface finish A B Load Approx. bearing weight capacity N K natural colour anodized ,028 K natural colour anodized ,029 K natural colour anodized ,031 K natural colour anodized ,033 K natural colour anodized ,035 K natural colour anodized ,037 K black anodized ,028 K black anodized ,029 K black anodized ,031 K black anodized ,033 K black anodized ,035 K black anodized ,037 K stainless steel ,042 K stainless steel ,044 K stainless steel ,051 K stainless steel ,053 K stainless steel ,062 K stainless steel ,067
45 K0236 Apparatus handles B 12 Connecting bridge in aluminium EN AW-6060; grip leg in polyamide glass-ball reinforced; threaded bush in brass 37 Connecting bridge finely ground and natural colour or black anodized; grip leg aluminium colour or black 10 K M4 A 10 Connecting bridge and grip leg are firmly screwed with each other. KIPP Apparatus handles Order No. Order No. Order No. Order No. A B Load Connecting bridge natural colour Connecting bridge natural colour Connecting bridge black Connecting bridge black bearing anodized, grip leg aluminium colour anodized, grip leg black anodized, grip leg aluminium colour anodized, grip leg black capacity N K K K K K K K K K K K K K K K K K K K K
46 K0237 Plastic handles Glass-ball reinforced thermoplastic; fastening material Matt black with fine texture K locking plate The plastic handles can be used for one-sided mounting. They are also dimensionally stable and have a high load rating. Fastening bolts, nuts and flat washers are supplied as well as a clamping plate for extra torsion protection. KIPP Plastic handles 276 Order No. A B D D1 H L L1 T Load Approx. bearing weight capacity N K M5x ,106 K M6x ,186
47 K0238 Tray handles only Form B for DIN 963/964/966-M4 rubber profile rubber profile height of mounting cutout Tray handle in aluminium profile, end caps polyamide; Form A: mounting by rubber profile Form B: mounting by 2 countersunk screws, steel Tray handle glass-ball blasted, satin finish and black anodized or natural colour anodized; rubber profile black; fastening screws galvanized K The tray handles Form A can be used without screw mounting with sheet strengths of mm. Two rubber profiles ensure absolutely firm mounting. The tray handles Form B can be mounted from outside with 2 countersunk screws. Two cross-slots offset by 90 for M4 screws allow earth/ground connection and can serve as a mounting aid for additional add-on parts. installation mounting cutout Assembly: After fitting the lower rubber profile, press the two side caps onto the tray handle. Next press the handle over the lower edge of the mounting cutout at a 45 angle and then hold it against the housing panel. Now push the 2nd rubber profile into the upper groove or mount it with 2 countersunk screws. for Form B Ø 4.5 (M4) KIPP Tray handles Order No. Order No. Form L Mounting cutout Load Approx. tray handle black anodized tray handle natural colour anodized bearing weight capacity N K K A x ,107 K K A x ,126 K K A x ,178 K K B x ,107 K K B x ,126 K K B x ,
48 K0239 Profile folding handles only Form B for DIN 963/964/966-M4 Tray and folding handle in aluminium profile, end caps polyamide; Form A: mounting by rubber profile Form B: mounting by 2 countersunk screws, steel Tray and folding handle glass-ball blasted, satin finish and black anodized or natural colour anodized; rubber profile black, fastening screws galvanized K installation mounting cutout height of mounting cutout rubber profile stop profile rubber profile Profile folding handles Form A can be fitted without screw mounting with 2 soft plastic profiles for sheet thickness mm. Profile folding handles Form B can be mounted from outside with 2 countersunk screws. Two cross-slots for M4 screws allow earthing connection and can serve as a mounting aid for additional parts. Assembly: After fitting the lower rubber profile, press the two side caps onto the tray handle. Next press the handle over the lower edge of the mounting cutout at a 45 angle and then hold it against the housing panel. Now push the 2nd rubber profile into the upper groove or mount it with 2 countersunk screws. for Form B Ø 4.5 (M4) KIPP Profile folding handles Order No. Order No. Form L Mounting cutout Load Approx. tray and folding handle tray and folding handle bearing weight black anodized natural colour anodized capacity N K K A x , K K A x ,320 K K A x ,433 K K B x ,273 K K B x ,320 K K B x ,433
49 K0240 Folding tray handles Form A handle snaps both into working and resting positions Form B handle swivels back automatically into resting position A A1 B Die cast aluminium Tray and handle black or light grey powder-coated, semi-matt K ,5 A2 20,5 A2 Ø 4,3 X Y1 ±0,2 Y H H1 for countersunk screws M4 H2 With their modern design, folding tray handles can be used wherever solid and attractive handles are required. Folding tray handles Form A snap into both resting and working positions. Folding tray handles Form B swivel back into its resting position automatically after use. Assembly: The folding tray handles can be installed behind or in front of the housing panel with the same housing cutout. mounting cutout X1 ±0,2 KIPP Folding tray handles Order No. Form Surface finish A A1 A2 B H H1 H2 X X1 Y Y1 Load Approx. bearing weight capacity N K A black powder-coated , ,197 K A black powder-coated ,286 K A light grey powder-coated , ,197 K A light grey powder-coated ,286 K B black powder-coated , ,197 K B black powder-coated ,286 K B light grey powder-coated , ,197 K B light grey powder-coated ,
50 18 77 M6 K0241 Measurement device handle Holder and grip glass-ball reinforced thermoplastic. Shaft and return springs in stainless steel matt black. K R 17 R 17 Measurement device handle is automatically resilient. It can be screwed onto the housing panel. Black galvanized countersunk screws with a cross recess M6x30 DIN 965, as well as suitable washers and nuts are supplied. KIPP Measurement device handle 280 Order No. Load bearing capacity N K
51 K0242 Trough grips A 25 8 Glass-ball reinforced thermoplastic Semi-matt, black or light grey K These ergonomically shaped trough grips are ideally suited for wall thickness of 1-5 mm. for countersunk screw M4 B B1 1-5 mm Assembly: The handle has to be inserted in the cutout of the housing panel and then mounted from front side with 2 countersunk screws (not included). mounting cutout A B1+1 mm ,3 KIPP Trough grips Order No. Colour A B B1 Load bearing Approx. capacity weight N K black ,044 K black ,056 K light grey ,044 K light grey ,
52 K0243 Fitting grip in stainless steel stainless steel Form A mounting cutout Stainless steel , x60 (= 360 ) High-electro-polished finish 62 K Stainless steel retractable grips with marginal installation depth. For base and mounting plates or drawers. With return spring. According to operation, the grip automatically swivels back into its resting position after use. 75 1, Form B mounting cutout R KIPP Fitting grip in stainless steel 282 Order No. Form Load bearing Approx. capacity weight N K A 200 0,213 K B 200 0,051
53 K0244 Machine handles view A-A A 73 ±1 65 ±1 6 Glass-ball reinforced thermoplastic PA Black A Ø 8,5 28 K K (1 packaging unit = 2 pieces) 14 Machine handles with ergonomic shape and reach-through protection for the hands. For installation on doors, flaps and aluminium profiles. Ideal for double-winged retractable doors. Fasten with hexagonal or socket head screw M ±0,5 L ±1 Covering caps are not included in delivery. A ,5 12,5 Ø 8, view A-A A 13,2 198 ±0,4 L ±1 KIPP Machine handles Order No. L Load bearing Approx. Order No. capacity weight cover caps N K ,114 K K ,356 K
K K
K0186 cast iron 2 R Gray cast iron, GJS 400 umbled, black powder-coated, support faces machined K0186.12510 1 ±0,5 KIPP, metric 202 Item o. Item o. 1 2 R Load tumbled tumbled capacity powder-coated, black
More informationPULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
More informationPull handles, tubular handles, recessed handles
, tubular handles, recessed handles 303 K0187 170 R25 55 14 M8 35 R12 140 32 82 R8 14 M8 57 uroplast PF 31, black. ushing brass or galvanized steel. igh-gloss polished. K0187.101 25 ssembly: From the rear.
More informationHandwheels, handles, position indicators
Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationQuarter-turn locks, compression latches
Quarter-turn locks, compression latches 435 K0518 Quarter-turn locks small version 2,5 13,5 4,5 SW 20 Ø20 max. 5 Ø16,2 14,2 Housing and actuator die-cast zinc. Housing and actuator chrome-plated. Wing-handle
More informationMaterial: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated
4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More information2: Ecokit Ecokit 11 Overview A 2_ Ecokit 11 Sub Rack Configuration A 2_ Width A 2_ Height / Depth A 2_6
2: Ecokit 11 2.1 Ecokit 11 Overview 2_3 2.2 Ecokit 11 Sub Rack Configuration 2_5 2.2.1 Width 2_5 2.2.2 Height / Depth 2_6 2.2.3 Handles 2_6 2.2.4 Line Drawing 2_7 2.3 daptation Kits 2_8 2.3.1 daptation
More informationAccessories. The extensive accompaniment for glass doors.
The extensive accompaniment for glass doors. CONTENTS Materials and surface finishes 138 Product information Door rails 139-140 Door holders 141 Hinges - special applications 142 Door stop and strike plates
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More informationPlease ask your local representative for your individual front panel design. You find your contact person on our home-page
Front Panels In addition to the wide range of standard front panels we also provide on request individual customer specific custom front panels with punching, surface finish and silk screening. Textured
More informationLevel indicators, screw plugs
Level indicators, screw plugs 885 Product overview Level indicators, screw plugs Oil level gauges K0443 Plastic plugs K0452 Oil level gauges K0444 Page 888 Aluminium plugs K0453 Page 894 Oil level sight
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationRK Monitor Mounting... page 254. GT page 264. GT 50, 60, page 274. Support arm / equipment carrier system
Support arm / equipment carrier system RK Monitor Mounting... page 254 GT 48... page 264 GT 50, 60, 80... page 274 Support arm / equipment carrier system RK Monitor Mounting All purpose mounting for monitors,
More informationSection 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationPart-No. Article / Version Supply A Tilt foot bar of ABS, off-white RAL 9002 A
*Mounting angle ( ) on the adapter serves as a support to locate the case in the right position. After attachment of the adapter, the mounting angles can be easily removed. Tilt foot bar, Case feet TILT
More informationMETTEC DESK CASES DESK CASES
METTEC DESK CASES DESK CASES Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages. Stand: 11/98 e Copyright 1998 OKW Gehäusesysteme KG Germany
More informationJunior /GP
Patents Hardware system with patch suspension for elegant all-glass sliding doors (ESG/VSG) weighing up to 40, 80, 120 and 160 kg (88, 176, 264 and 352 lbs.). Inset profile system HAWA-Adapto 80-120 see
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationINDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY RANGE OF ACCESSORIES COMPETENCE CENTRE INDUSTRIAL VACUUMING. Valid from
INDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY Valid from 01.01.2019 COMPETENCE CENTRE INDUSTRIAL VACUUMING 2 3 DEAR CUSTOMER, This catalogue provides you with an essential selection of the
More informationJdB cassette. Version 1.03 Sun Protection AVZ 3J.1
Version 1.0 Sun Protection AVZ J.1 J.2 Sun Protection AVZ Version 1.0 4211 424-000 Alu wall bracket JdB 95 mm Mill finish 4211 424-006 Idem RAL 9010 pure white 4211 424-755 Idem (* = Textured) RAL 7016
More informationFunction: Used to connect profiles at adjustable angles. Features: 1. Adjustable angles. Item Description For Screw Weight (g) Colour Finish Material
4.56 Swivel Fastener (SWF): Function: Used to connect profiles at adjustable angles. 1. Adjustable angles. SWF 1.25.0132.0 8 M6x S3.60 M6 S3.61 M6x S3.60 Item Description For Screw Weight (g) Colour Finish
More informationHotel Service FROnt OFFICe 02 Front Office
Front Office 41 . Premium GS-Trend The extravagant luggage collection trolley > An eye-catcher at check-in > Very nimble, optional locking brake > Integrated coat rail GS-Trend Plastic powder-coated Metallic
More informationInserts for square and rectangular tubes
Inserts for square and rectangular tubes 35 Outer tube dimensions Ribbed inserts/plugs with smooth sliding surface for square and rectangular tubes. The tube inserts are suitable for tubes with a wall
More informationB Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationPage
Tecnoinanles Page 68 69 69 70 70 71 72 72 72 www.tecnoin.com 1 1 5 3 S O I D N D E W I T T R E D E D I N S E R T S Coe c t Color 115312301 124 109 ± 1 M6 45 21 10 Black 115314301 148 132 ± 1 M8 54 24 14
More informationVisual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page
NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening
More informationModel. Reach into areas as small as 3/8". Model. Max. Air Flow SCFM (L/Min)
The Dynafile Original The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and
More informationMoisture-proof cable branch boxes Ceiling distribution boxes Lamp suspension boxes Wall boxes Concrete wall boxes and accessories
Branch and lustre terminals Apparatus and light terminals Porcelain terminals Screwless terminals Flat plug terminals Flat plug branch terminals Mains branch terminals Connection terminals Earthed wire
More informationHahn Serie 60 AT. Universal hinge for versatile application. More modern look Improved technology
Hahn Serie 60 AT Universal hinge for versatile application! More modern look Improved technology 2 4 5 6 7 8 9 2 3 4 5 6 7 8 9 2 Hahn Serie 60 AT For all doors made from metal profile sections NEW! Uniform
More informationKitchen and Bath Organization
Ironing Boards...873 874 Pull-Out Table Systems...875 876 Foldaway Systems...877 878 Corner Systems...879 896 Base Cabinet Pull-Out Systems...897 905 Basket Storage Systems...906 910 Pantry Pull-Out Systems...911
More informationHinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
More information2: Stylebox Stylebox 15 Overview B 2_ Complete Stylebox 15 Kits B 2_ Stylebox 15 Standard Kit B 2_8
2.1 Stylebox 15 Overview 2_3 2.1.1 Complete Stylebox 15 Kits 2_7 2.1.2 Stylebox 15 Standard Kit 2_8 2.2 Stylebox 15 Smart 2_10 2.2.1 Width 2_11 2.2.2 Height ezel 2_11 2.2.3 Depth 2_11 2.2.4 Top Cover Panel
More informationGoTo Europe Focused Delivery Program. Product overview assembly technology
GoTo Europe Focused Delivery Program Product overview assembly technology 2 GoTo Europe Products you need, delivered when you need them In today s global competition every day counts. Fast response times
More informationC13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationNew Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS
New Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS 1 Modifications & Custom Components Diverse manufacturing capabilities and experienced on-site technical personnel allow Dumeta to offer a wide
More informationSlam-Cam Page. Material: a) Slam-Cam: zinc die, chrome plated Spring: steel, zinc plated Washer: Teflon
Slam-Cam Page 1-264 Slam-Cam for Slam Doors. Locking without key or tool. To a): The Teflon washer replaces the wave washer underneath the insert. Used with all Quarter- Turns and inserts according to
More informationRECA VISO Assortments
Clear plastic lids: Easy viewing of product and stock. Ergonomically designed handle: comfortable to carry and use. Stackable without slipping: the base and the lids fit into one another. RECA VISO Cabinets
More information01 Product overview KT series order picking trolleys MultiPick trolley Pick and Pack Order picking container
01 Product overview 01.01 01.09 KT series order picking trolleys 01 KT1 02 KT2 03 KT3 04 KT4 05 KT DRIVE 06 KT3-KOMBI 07 KT ALU 08 KT-R 09 KT-B 01.10 MultiPick trolley 01.11 Pick and Pack 10 MULTIPICK
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationPneumatic tools and accessories. For trades and businesses.
Competence from passion. Pneumatic tools and accessories. For trades and businesses. Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact
More informationSecure footing. Easy levelling. Blickle levelling castors with integrated truck lock
Secure footing. Easy levelling. Blickle levelling castors with integrated truck lock www.blickle.com 2 we innovate mobility www.blickle.com Blickle levelling castors Sturdy in use. Easy to use. The right
More informationC.4.CHRONO TILT AND TURN
C.4. Contents General characteristics................... Base set n 31111, 31112 and 31113...... Centre locking set n 30140-30........... Selection of rods n 30000-................ page C.4.2 C.4.5 C.4.6
More informationmechanics Features Technical specification Ordering information Dimensioned drawings Aluminium profiles made by isel
Panel profiles PP profiles For fast and easy erection of frames, benches and racks luminium, naturally anodised easy, very strong under load Top edge particularly suitable as a load-bearing cladding, also
More informationMECHANICS. Aluminium profiles Linear guides Drive elements Linear units Rotational units
Aluminium profiles...2-2 Linear guides...2-18 Drive elements...2-44 Linear units...2-52 Rotational units...2-94 Aluminium profiles Aluminium profiles PP profiles Panel profiles PP PP 100 PP 1 PP 200 Overview
More informationSliding Door Fittings, Roller Shutters Vertical Sliding Door Fittings
Vertico 16 VF, door weight up to 15 kg, for 2 bi-parting doors Door height: 300 600 mm Door thickness: Min. 16 mm Side panel thickness: Min. 1 mm Running gear: Top and bottom running, 4 rollers, with ball
More informationCabinet interiors Summary of ranges
Cabinet interiors Summary of ranges Fitting systems for kitchens Summary 888-889 Fitting systems for bathrooms Summary 1052-1053 Fitting systems for wardrobe interiors Range summary 1068-1069 Fitting systems
More informationThe BERNSTEIN CS-3000
Flexible and efficient: The BERNSTEIN CS-3000 Designers and manufacturers expect modern suspension systems to feature variable configuration, progressive design and complete ease installation. BERNSTEIN
More informationCONTENTS. Sliding Door Fittings Information. Sliding door fittings from Häfele. Sliding door application for Classic 40-J/80-J/120-J
Information CONTENTS Sliding door fittings from Häfele...3 Soft and self closing systems from Häfele...4 Sliding door fitting Classic 40-P/80-P/120-P SLIDO... Sliding door fitting Classic 40-P/80-P/120-P
More informationDynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
More informationApplications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches
FEET PA 00.0 076/ 0 - PA, grey - Anti-skid insert NBR - All bolts are suitable for all plates Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors
More informationZERO-POINT CLAMPING SYSTEM
simple. gripping. future. ZERO-POINT CLAMPING SYSTEM 22 Quick Point Grid Plates 3 Quick Point Plates 34 Quick Point Round Plates 39 Quick Point Adaptor Plates 4 Quick Point Clamping Studs 43 Quick Point
More informationSeries 2000 Entrance Door Price List
Series 2000 Entrance Door Price List 02.04.2018 Hörmann United Kingdom Hörmann (UK) Limited Gee Road Coalville Leicestershire LE67 4JW Phone: 01530 513000 Fax: 01530 513001 info@hormann.co.uk Leicestershire
More informationRolec aluplus. The PlUS in technology and design.
Our passion is enclosures. The evolution in enclosure technology. Rolec aluplus. The PlUS in technology and design. 2 Rolec milestones in enclosure development. Our passion is enclosures. aluplus The evolution:
More informationDesign and Manufacture Data Booklet. National 5, Higher and Advanced Higher
Design and Manufacture Data Booklet National 5, Higher and Advanced Higher This edition: November 2018, version 1.0 Published by the Scottish Qualifications Authority The Optima Building, 58 Robertson
More informationSelection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
More informationLift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
More informationSUPPORT ALU. Aluminium Support ECA ERA EMST ETS.
www.easy-conveyors.com SUPPORT ALU ECA ERA EMST ETS Aluminium Support The conveyors are held in place by a well balanced range of support components, with beam support brackets, support beams, feet, etc.
More informationGlass door fittings Glass door hinges Glass door knobs Inset handles for glass doors Glass door handle Glass door stop
4c 39 404 406 40 409 409 Glass door fittings Glass door hinges Glass door knobs Inset handles for glass doors Glass door handle Glass door stop Overview 13 4224 Pages 39, 399 13 422 Page 404 13 4220 Pages
More informationThe SSI SCHÄFER system for smaller refuse bins is made in accordance with. Small refuse bins Classic bins for traditional collection systems
Small refuse bins Classic bins for traditional collection systems Small refuse bins SME 35 / 50 and refuse bins SMT 70 / 110 The SSI SCHÄFER system for smaller refuse bins is made in accordance with the
More informationDoor thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
More informationUS FUTABA ESTABLISHED 1983 NEW IN THIS SECTION OFFICE LINE. Short Type 4 5-1/8" ( mm) 23.5 Ø /4" 45 mm. 1-3/16" 30 mm 5/8" 15.
0 5 1-3/4" 1-3/16" 30 5/8" 15.8 15 ESTABLISHED 1983 31/64" 1 Ø 100 Ø + 1/" 1" 1/8" NEW IN THIS SECTION " Short Type 4 5-1/8" (100 130 ) Ø =, & 80 11 13 0 Ø 6 Extra Heavy Duty Adjustable Floor Leveler (Page
More informationorder catalog ESA / ESOC Miracel
order catalog ESA / ESOC Miracel Racks incl. Accessoires Erstellt von Wolfgang DIETER - 1 / 13 - Datum: 21.08.2008 table of contents: Pos. 1 Miracel 19 -Rack H2000 W600 D800 Type 1...3 Pos. 2 Miracel 19
More informationmarkilux 1500 The semi-cassette awning with gas piston arm technology Something special and not just technically speaking
PATIO AND BALCONY AWNINGS safe timeless beautiful rated to wind resistance class 2 (corresponds to Beaufort 5) markilux 1500 The semi-cassette awning with gas piston arm technology Something special and
More information0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table
Type overview FSR with guide cables or rods Type key FSR P S 0 0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table Cover panel without back-fold: S = small,
More informationFLUX walking aid Spare Parts Catalog
FLUX walking aid Spare Parts Catalog GB/US When ordering spare parts, please always indicate the following basic data to ensure smooth delivery: ) Serial no. of the product ) Frame width ) Frame colour
More informationK16.14 STAINLESS STEEL DOOR PULLS
K16 DOORS K16.14 01.06.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K16.14.03 1.1. General information
More informationCam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More informationPremium Design - Premium Performance - Premium Quality
WITOPET premium NEW Premium Design - Premium Performance - Premium Quality Looking for the latest pipetting innovation at an attractive price? WITOPET premium is just the right pipette for you. The ergonomic
More informationuni-cart THE RIGHT CHOICE WHERE SPACE IS AT A PREMIUM uni-cart
THE RIGHT CHOICE WHERE SPACE IS AT A PREMIUM is a compact and safe equipment cart with a loading capacity of up to 65 kg / 143 lbs. With its 4 or 5-foot-base frames and lockable wheels this trolley is
More informationHAWA-JUNIOR 80 XINNIX POCKET SLIDING DOOR SYSTEM
SLIDING DOOR FITTINGS DIRECTORY / APRIL 2014 POCKET SLIDING INTERIOR DOOR SYSTEMS HAWA-JUNIOR 80 XINNIX POCKET SLIDING DOOR SYSTEM High quality straight sliding door gear for residential or commercial
More informationDESK CASES MODIFICATIONS AS PER CUSTOMER S REQUIREMENTS. See pages DESK CASE
S Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages. Stand: 11/98 e Copyright 1998 OKW Gehäusesysteme KG Germany (http://www.okw.com)
More informationSide Hinged Up & Over Personnel Wicket Doors www.selectgaragedoors.co.uk 2014 STEEL DOOR DESIGNS. OR UP & OVER DERWENT PAGE 3 MARPLE PAGE 4 LANGDALE PAGE 5 BOWDON PAGE 6 WINDOW OPTIONS PAGES 7&8 DUNHAM
More informationProfile guide/actuator - RK Compact
Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of
More informationH A W A Variotec 150/GV Patents
Modular hardware system for elegant all-glass sliding walls weighing up to 100 or 150 kg (220 or 330 lbs.) per panel. Description The HAWA-Variotec 150/GV is a hardware system with outstanding running
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationDynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16
Dynafile...8 Dynafile II...11.4 hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile III...18 Dynabelter...22 Dynangle...25 Dynangle II...26 Take-About Sander...27
More informationargenta opening doors
Door and window fittings Content Table of contents Introduction... 03 Window restrictors... 04 Window handles for aluminium frames... 06 Window handles for wooden frames... 07 Window handles for PVC frames...
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More informationDoor, Hatch & Interior Fittings
Sea Blue Security Locks NEW 10 Year Guarantee Sea Blue Security locks have been developed in the lock capital of England to withstand both corrosion and physical attack. Heavy steel full casings are used
More informationStandard Machine Elements Worldwide
Standard Machine Elements Worldwide 2 GN 473 Foot clamp mountings Aluminium GN 480.1 Retaining rods Retaining tubings Stainless Steel Pictorial index GN 474 Two-way clamp mountings Aluminium page 5 GN
More informationamicus task, general use & guest
amicus task, general use & guest reinforced nylon scuff-resistant plastic " base 0mm ( 1/") hard (carpet casters) reinforced nylon twin-wheeled and hooded 1/" hard plastic glides soft glides have soft
More informationStorage Fittings 1 º q µ ³ ³ Â É 1.1
1.0 Storage Fittings 1 1.1 1 ARENA Plus anti-slip finish welcome to the quiet kitchen Kesseböhmer developed the special ARENA Plus coating which prevents pots and pans, crockery and groceries slipping
More informationProduCTS.
ProduCTS AbfAllbehälTer & ConTAiner Weber GmbH & Co. KG quality made in germany Weber is one of the leading manufacturers of waste management products and offers a high-quality range of waste containers
More informationTAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
More informationHinges and Flap Fittings Application Matrix
Application Matrix Model Opening angle Application Page Soft close Opening Integrated Optional With handle Without handle Screws Without tools Duomatic Concealed hinges Premium 110 Standard.11 / / / /
More informationDRIVE SYSTEM. Operation and support elements made of stainless steel for chambers and water treatment works
DRIVE SYSTEM Operation and support elements made of stainless steel for chambers and water treatment works Page 1 DALMINEX www.dalminex.de info@dalminex.de DRIVE SYSTEM Foreword DALMINEX, has been producing
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More informationB12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS
B12 TILT-TURN WINDOWS B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationRAUWORKS SCREEN/PARTITION PRODUCT RANGE AND TECHNICAL INFORMATION. Construction Automotive Industry
RAUWORKS SCREEN/PARTITION PRODUCT RANGE AND TECHNICAL INFORMATION From 01.02.2015 Subject to technical modifications www.rehau.com Construction Automotive Industry PRODUCT RANGE The acoustically effective
More informationADJUSTED TO SITUATION AND SPACE
ADJUSTED TO SITUATION AND SPACE The is a modern, single-column equipment cart with a maximum load of up to 65 kg/143 lbs. This compact equipment cart has a modular configuration, which can be equipped
More informationAwning System markilux planet. The innovative awning-cum-umbrella stand system. markilux.com
The innovative awning-cum-umbrella stand system. Product characteristics 4 Wind resistance class 2 eaufort 5 7.5.4 m/s 28 37 km/h mph 3 2 1 1 planet flex: turning range of 300 in ten 30 lockable steps
More informationSolu. Stainless steel legs. Product Catalogue HARDWARE. Combining Design And Engineering Excellence. Furniture Hardware
HARDWARE Combining Design And Engineering Excellence Stainless steel legs Product Catalogue Solu 2013.10 Updated Aluminium Frame Door And Edge Profiles Handle Free Solutions Solu offer a range of metal
More information