DRIVE SYSTEM. Operation and support elements made of stainless steel for chambers and water treatment works

Size: px
Start display at page:

Download "DRIVE SYSTEM. Operation and support elements made of stainless steel for chambers and water treatment works"

Transcription

1 DRIVE SYSTEM Operation and support elements made of stainless steel for chambers and water treatment works Page 1 DALMINEX info@dalminex.de

2 DRIVE SYSTEM Foreword DALMINEX, has been producing Extension spindles and operating elements for valves at their factory in Schloss Holte-Stuckenbrock since Their name stands for continuous development of these products based on customer requirements. In 2011, the production facilities were extended to include a stainless steel workshop. Since then, close cooperation with customers has led to the following range of stainless steel products for a modular drive system, operation of valves in chambers and water treatment works. The products shown in this brochure represent only part of this range. Of course, we look forward to assisting you with special requirements. Please contact us and we look forward to hearing from you! With kind regards from Schloß Holte-Stukenbrock Markus Kerstingjohänner Management Page 2 DALMINEX info@dalminex.de

3 INSTALLATION EXAMPLE Extension spindle in 16m chamber over-hanging floorstand round steel pipe Ø48x3000 mm approx wall bracket round steel pipe Ø48x3000 mm round steel pipe Ø48x4000 mm round steel pipe Ø48x4000 mm max DALMINEX Page 3

4 MODULE SYSTEM Adjustable extension including stainless steel adjustment ring and drilled holes 27/ L DN 40/50 SQ 14/17 DN 65/80 SQ 17/19 DN SQ 19/22 DN 175/200 SQ 24/27 Pos. Description Material 1 Square cap 27/32 mm AISI304 2 Clip-pin Square profile tube 20 x 20 mm Square profile tube 25 x 25 mm Square profile tube 30 x 30 mm Adjustment ring AISI304 7 Coupling 14/17 mm AISI304 8 Coupling 17/19 mm AISI304 9 Coupling 19/22 mm AISI Coupling 24/27 mm AISI Coupling 27/32 mm AISI Keyway coupling Ø 16 mm, 18 mm, 20 mm, 22 mm, 25 mm, 30 mm AISI Coupling, cylindrical 17 mm, 22 mm, 25 mm, 27 mm AISI304 DN SQ 27/32 Keyway Ø 16 Ø 18 Ø 20 Ø 22 Ø 25 Ø 30 17/17 22/22 25/25 27/27 Page 4 DALMINEX info@dalminex.de

5 MODULE SYSTEM Adjustable extension including stainless steel adjustment ring and drilled holes Spindle extension Square profile tube Upper: 20 x 20 mm Lower: 25 x 25 mm Square profile tube Upper: 30 x 30 mm Lower: 25 x 25 mm Spindle extension Total length L (V2A) Article No (V4A) Article No m V2A V4A m V2A V4A m V2A V4A m V2A V4A m V2A V4A m V2A V4A m V2A V4A m V2A V4A m V2A V4A m V2A V4A m V2A V4A m V2A V4A m V2A V4A m V2A V4A Square cap made of stainless steel (AISI304) 27/32 mm Description Article No. Weight 20 x 20 mm VA-GW kg 30 x 30 mm VA-GW kg Coupling made of stainless steel (AISI304), without clip-pin Version Description X1/X2 Article No. Weight Coupling 2 x Clip-pin Coupling 1 x Clip-pin 1 x Set screw Coupling 1 x Clip-pin 1 x Set screw DN 40/50 (SQ 14) 14/17 mm VK-VA 0.5 kg DN 65/80 (SQ 17) 17/19 mm VK-VA 0.6 kg DN (SQ 19) 19/22 mm VK-VA 0.7 kg DN 175/200 (SQ 24) 24/27 mm VK-VA 0.8 kg DN (SQ 27) 27/32 mm VK-VA 1.2 kg Keyway Ø 16 mm VK-VA 0.7 kg Keyway Ø 18 mm VK-VA 0.7 kg Keyway Ø 20 mm VK-VA 0.7 kg Keyway Ø 22 mm VK-VA 0.7 kg Keyway Ø 25 mm VK-VA 0.7 kg Keyway Ø 30 mm VK-VA 0.7 kg Cylindrical 17/17 17/17 mm VK-VA 0.6 kg Cylindrical 22/22 22/22 mm VK-VA 0.6 kg Cylindrical 25/25 25/25 mm VK-VA 0.6 kg Cylindrical 27/27 27/27 mm VK-VA 0.6 kg Clip-pins made of stainless steel Article No. Weight Description kg Clip-pin Gate valve DN / VA kg Clip-pin Service valve VAA / VA DALMINEX info@dalminex.de Page 5

6 FLOORSTANDS Central Floorstand, closed supported tube , Pos. Description Material 1 Square attachement 25 x 25 mm Holding disc PE 3 Head plate Floorstand pipe Base plate Other lengths available upon request Page 6 DALMINEX info@dalminex.de

7 FLOORSTANDS Version 1: Central Floorstand, with square cap Central Floorstand (V2A) V2A 14.0 kg Central Floorstand (V4A) V4A 14.0 kg Operating cap 27/32mm with parallel 25x25mm entry with set screw and bolt and washer for mounting of hand wheel AISI VK-SS 0.9 kg Version 2: Central Floorstand, with square cap and handwheel Central Floorstand (V2A) V2A 14.0 kg Central Floorstand (V4A) V4A 14.0 kg Operating cap 27/32mm with parallel 25x25mm entry with set screw and bolt and washer for mounting of hand wheel AISI VK-SS 0.9 kg Hand wheel in plate steel (blue painted) Including Bolt and washer DN SQ 27/32 S235JR kg Version 3: Central Floorstand, with square cap and position indicator Central Floorstand (V2A) V2A 14,0 kg Central Floorstand (V4A) V4A 14,0 kg Operating cap 27/32mm with parallel 25x25mm entry with set screw and bolt and washer for mounting of hand wheel AISI VK-SS 0,9 kg Position indicator square insert 26 x 26 mm max. turns/stroke Article No. Weight kg kg kg kg kg Version 4: Central Floorstand, with adapter for actuator Central Floorstand (V2A) V2A 14.0 kg Central Floorstand (V4A) V4A 14.0 kg Adapter F10* suitable for flange assembly and actuator (AUMA) Adapter F14* for flange assembly and actuator (AUMA) *includes assembly materials (V2A) F10.V2A 1.3 kg (V4A) F10.V4A 1.3 kg (V2A) F14.V2A 4.3 kg (V4A) F14.V4A 4.3 kg DALMINEX info@dalminex.de Page 7

8 FLOORSTANDS Central Floorstand, sealed (Connection in accordance with EN ISO 5210) keyway rod guided with ball-bearing for assembly of actuator a 1 L , EN ISO 5210 Pos. Description Material 1 Centered rod with keyway Ball-bearing guide Head plate Floorstand pipe Guiding bush Brass 6 Ground plate with anchoring bolts Other lengths available upon request Flange F10 F14 F16 Ø a L Page 8 DALMINEX info@dalminex.de

9 FLOORSTANDS Version 1: Central Floorstand, for flange F10 and Keyway Ø20 Central Floorstand, with keyway Ø (V2A) V2A 19,0 kg Central Floorstand, with keyway Ø (V4A) V4A 19,0 kg Adapter F10* suitable for flange assembly (V2A) F10.V2A 0,6 kg Adapter F10* suitable for flange assembly (V4A) F10.V4A 0,6 kg *includes assembly materials Keyway Ø20 45 F10 Version 2: Central Floorstand, for flange F14 and Keyway Ø30 Central Floorstand, with keyway Ø (V2A) V2A 22,0 kg Central Floorstand, with keyway Ø (V4A) V4A 22,0 kg Adapter F14* suitable for flange assembly (V2A) F10.V2A 1,3 kg Adapter F14* suitable for flange assembly (V4A) F10.V4A 1,3 kg *includes assembly materials Keyway Ø30 64 F14 Version 3: Central Floorstand, for flange F16 and Keyway Ø40 Central Floorstand, with keyway Ø (V2A) V2A 26,0 kg Central Floorstand, with keyway Ø (V4A) V4A 26,0 kg Adapter F16* suitable for flange assembly (V2A) F16.V2A 1,7 kg Adapter F16* suitable for flange assembly (V4A) F16.V4A 1,7 kg *includes assembly materials Keyway Ø40 80 F16 DALMINEX Page 9

10 FLOORSTANDS Central Floorstand, open (Connection in accordance with EN ISO 5210) a Sealing bush with EPDM O-Ring (Sealed in accordance with KTW W270) 300 L EN ISO 5210 Pos. Description Material 1 Rod with keywayed attachment Head plate in accordance with EN ISO Steel plate support Steel plate side supports Sealing bush Brass 6 Ground plate with anchoring bolts Other lengths available upon request Flange F10 F14 F16 Ø a L Page 10 DALMINEX info@dalminex.de

11 FLOORSTANDS Version 1: Central Floorstand, open, with square cap Central Floorstand, open, Head plate for Rod (V2A) V2A 20,0 kg Central Floorstand, open, Head plate for Rod (V4A) V4A 20,0 kg Operating cap 27/32mm with 30mm Keywayed entry with set screw and bolt and washer for mounting of hand wheel AISI VK-SS 0,9 kg Version 2: Central Floorstand, open, with square cap and handwheel Central Floorstand, open, Head plate for Rod (V2A) V2A 20,0 kg Central Floorstand, open, Head plate for Rod (V4A) V4A 20,0 kg Operating cap 27/32mm with 30mm Keywayed entry with set screw and bolt and washer for mounting of hand wheel AISI VK-SS 0,9 kg Hand wheel in plate steel (blue painted) Including Bolt and washer DN SQ 27/32 S235JR ,5 kg Version 3: Central Floorstand, open, with square cap and position indicator Central Floorstand, open, Head plate for Rod (V2A) V2A 20,0 kg Central Floorstand, open, Head plate for Rod (V4A) V4A 20,0 kg Operating cap 27/32mm with 30mm Keywayed entry with set screw and bolt and washer for mounting of handwheel AISI VK-SS 0,9 kg Position indicator with keywayed rod 30 mm max. turns/stroke Article No. Weight ,7 kg ,7 kg ,7 kg ,7 kg ,7 kg Version 4: Central Floorstand, open, with Suitable for attachment of Actuator EN ISO 5210 Central Floorstand*, open, with head plate F10 Central Floorstand*, open, with head plate F (V2A) F10.V2A 33,00 kg (V4A) F10.V4A 33,00 kg (V2A) F14.V2A 36,00 kg (V4A) F14.V4A 36,00 kg *includes assembly materials DALMINEX Page 11

12 FLOORSTANDS Overhanging Floorstand, open Pos. Description Material 1 Rails for head plate Angle frame Support plate Rod support Ground plate with Anchoring bolts Wall installation with bolts Other lengths available upon request Page 12 DALMINEX info@dalminex.de

13 FLOORSTANDS Version 1: Overhanging Floorstand, with square cap Overhanging Floorstand (V2A) ,0 kg Overhanging Floorstand (V4A) ,0 kg Operating cap 27/32mm with parallel 25x25mm entry with set screw and bolt and washer for mounting of hand wheel AISI VK-SS 0,9 kg Support plate for rod* (V2A) V2A 0,9 kg Support plate for rod* (V4A) V4A 0,9 kg *includes assembly materials Version 2: Overhanging Floorstand, with square cap and handwheel Overhanging Floorstand (V2A) ,0 kg Overhanging Floorstand (V4A) ,0 kg Operating cap 27/32mm with parallel 25x25mm entry with set screw and bolt and washer for mounting of hand wheel AISI VK-SS 0,9 kg Hand wheel in plate steel (blue painted) DN SW 27/32 S235JR ,5 kg Support plate for rod* (V2A) V2A 0,9 kg Support plate for rod* (V4A) V4A 0,9 kg *includes assembly materials Version 3: Overhanging Floorstand, with square cap and position indicator Overhanging Floorstand (V2A) ,0 kg Overhanging Floorstand (V4A) ,0 kg Operating cap 27/32mm with parallel 25x25mm entry with set screw and bolt and washer for mounting of hand wheel AISI VK-SS 0,9 kg Support plate for rod* (V2A) V2A 0,9 kg Support plate for rod* (V4A) V4A 0,9 kg *includes assembly materials Position indicator square insert 26 x 26 mm max. turns/stroke Article No. Weight ,7 kg ,7 kg ,7 kg ,7 kg ,7 kg Version 4: Overhanging Floorstand, with F10/F14 support plate, adapter for actuator Overhanging Floorstand (V2A) ,0 kg Overhanging Floorstand (V4A) ,0 kg Adapter F10* with Support plate and actuator (AUMA) (V2A) F10.V2A 2,6 kg Adapter F10* with Support plate and actuator (AUMA) (V4A) F10.V4A 2,6 kg Adapter F14* with Support plate and actuator (AUMA) (V2A) F14.V2A 3,8 kg Adapter F14* with Support plate and actuator (AUMA) (V4A) F14.V4A 3,8 kg *includes assembly materials DALMINEX info@dalminex.de Page 13

14 WALL MOUNTING SYSTEM Wall bracket Description Material Length (L) Article No. Weight Over-hanging Wall bracket Stainless steel (V2A) mm V2A 9,3 kg Over-hanging Wall bracket Stainless steel (V4A) mm V4A 9,3 kg includes assembly materials Wall Mounting rail combinable with wall brackets Description Material Length (L) Article No. Weight Wall mounting rail Stainless steel (V2A) 600 mm ,2 kg Wall mounting rail Stainless steel (V2A) 1000 mm ,4 kg Wall mounting rail Stainless steel (V4A) 600 mm ,2 kg Wall mounting rail Stainless steel (V4A) 1000 mm ,4 kg includes assembly materials Wall brackets for extensions Description Material Length (L) Article No. Weight Wall brackets for extensions 25 x 25 mm includes assembly materials Stainless steel (V2A) mm ,0 kg Stainless steel (V4A) mm ,0 kg Wall brackets for protective tubes Description Material Length (L) Article No. Weight Wall brackets for protective tubes includes assembly materials Stainless steel (V2A) mm ,0 kg Stainless steel (V4A) mm ,0 kg Universal joint 25 Universal joint DIN 808 G (both ends 25x25mm parallel) includes assembly materials and drilled hole for pins (V2A) VK-VA 1,3 kg 25 Page 14 DALMINEX info@dalminex.de

15 ACCESSORIES Handwheel: ergonomically shaped Metal, blue RAL 5015 DN SQ Diameter Article No. blue* Weight 40/50 14/ mm ,8 kg 65/80 17/ mm ,3 kg / mm ,8 kg 175/200 24/ mm ,5 kg / mm ,5 kg 400/450 32/ mm ,5 kg 400/450 32/ mm ,0 kg *other colours upon request Handwheel: cast iron DIN 3220, GG20 DN SQ Diameter Article No. black* Weight 40/50 14/ mm ,1 kg 65/80 17/ mm ,0 kg / mm ,3 kg 175/200 24/ mm ,4 kg / mm ,0 kg *other colours upon request Safety handwheel wrench DN Length Article No. Weight mm ,7 kg mm ,0 kg mm ,7 kg mm ,2 kg Aluminium mechanical position indicator Square insert 26 x 26 mm max. turns/stroke Article No. Weight 13 turns/stroke ,7 kg 47 turns/stroke ,7 kg 140 turns/stroke ,7 kg 470 turns/stroke ,7 kg 1390 turns/stroke ,7 kg Electrical position indicator made of aluminium Square insert 26 x 26 mm max. turns/stroke Article No. Weight 13 turns/stroke D 1,8 Kg 47 turns/stroke D 1,8 Kg 140 turns/stroke D 1,8 Kg 470 turns/stroke D 1,8 Kg 1390 turns/stroke D 1,8 Kg DALMINEX info@dalminex.de Page 15

16 L L ACCESSORIES 7 Square cap conical: ductile cast iron or galvanized 27/32 X1 X2 Article No. Description X1/X2 Weight VK-VZ Square cap 27/32 service valve 12/14 mm 0.7 kg VK-VZ Square cap 27/32 DN 40/50 14/17 mm 0.7 kg VK-VZ Square cap 27/32 DN 65/80 17/19 mm 0.7 kg VK-VZ Square cap 27/32 DN /22 mm 0.8 kg VK-VZ Square cap 27/32 DN 175/200 24/27 mm 1.1 kg VK-VZ Square cap 27/32 DN /32 mm 1.2 kg VK-VZ Square cap 27/32 DN 400/450 32/36 mm 1.5 kg VK-VZ Square cap 48/53 DN 500/600 36/42 mm 4.6 kg spindle drilling hole cross-drilled with grooved pin Square cap cylindrical: ductile cast iron or galvanized Artikel VK-VZ X2 X /32 Article No. Description Weight VK-VZ Square cap 12/14 Inner square 14x kg VK-VZ Square cap 27/32 Inner square 14x kg VK-VZ Square cap 27/32 Inner square 18x kg VK-VZ Square cap 27/32 Inner square 25x kg with set screw M 10 Artikel VK-VZ VK-VZ VK-SS Square cap cylindrical: ductile cast iron or stainless steel Square cap, finely cast stainless steel 27/32 Article No. Description Weight Artikel VK-VZ VK-SS , VK-SS Square cap 27/32 Inner square 18x18 0,4 kg VK-SS Square cap 27/32 Inner square 25x25 0,9 kg with set screw M SPECIAL - Square cap with pin: ductile cast iron or galvanized SW Article No. Description Ø L SW Weight VK-VZ for service & DN 40/50 gate valve, with pin 4 x 40 4 mm 40 mm 27/32 mm 0,4 kg VK-VZ for gate valve DN , with pin 6 x 60 6 mm 60 mm 27/32 mm 0,7 kg for Ruhrgas VN-Norm 20 mm 60 mm 40/52 mm 1,1 kg with set screw M 10 X1 X2 SPECIAL - Square cap with keyway: ductile cast iron or galvanized 27 Article No. Description X1/X2 Weight VK-VZ Square cap 27/32 with key 12/14 mm 0.4 kg GAS02 Square cap 27/32 with key 19/22 mm 0.7kg GAS02 Square cap 27/32 with key 24/27 mm 1.0 kg M10 X1 with set screw M 10 X2 Page 16 DALMINEX info@dalminex.de

17 ACCESSORIES Triangular cap: ductile cast iron or galvanzied Article No. Description X1/X2 X3/X4 Weight VK-VZ 33/43 galvanized 12/14 mm 33/43 mm 0.8 kg VK-VZ 33/43 galvanized 14/17 mm 33/43 mm 0.8 kg VK-VZ 33/43 galvanized 17/19 mm 33/43 mm 0.8 kg VK-VZ 33/43 galvanized 19/22 mm 33/43 mm 0.8 kg VK-VZ 33/43 galvanized 24/27 mm 33/43 mm 1.0 kg VK-VZ 33/43 galvanized 27/32 mm 33/43 mm 1.1 kg VK-VZ* 15/18 Tele2000, galvanized 12/14 mm 15/18 mm 0.4 kg VK-VZ* 15/18 Tele2000, without plate VAA 12/14 mm 15/18 mm 0.4 kg VK-VZ* 33/43 Tele2000, galvanized 18/18 mm 33/43 mm 0.7 kg *with set screw M 10 Coupling: ductile cast iron or galvanized - conical both ends with slotted hole L X4 X3 X1 X2 Article No. Description X1/X2 Weight VK-VZ conical both ends 12/14 mm 0.5 kg VK-VZ conical both ends DN 40/50 (SQ 14) 14/17 mm 0.5 kg VK-VZ conical both ends DN 65/80 (SQ 17) 17/19 mm 0.6 kg VK-VZ conical both ends DN (SQ 19) 19/22 mm 0.8 kg VK-VZ conical both ends DN 175/200 (SQ 24) 24/27 mm 1.0 kg VK-VZ conical both ends DN (SQ 27) 27/32 mm 1.3 kg VK-VZ conical both ends DN 400/450 (SQ 32) 32/36 mm 2.1 kg VK-VZ conical both ends DN 500/600 (SQ 36) 36/42 mm 4.8 kg Special and cross-drilled holes available upon request Coupling GW336: ductile cast iron or galvanized Article No. Suitable for valve X1/X2 X3 Weight VK-GW336 Service valves (SQ 12) 12/14 mm 20 mm 0.2 kg VK-GW336 DN 40/50 (SQ 14) 14/17 mm 25 mm 0.5 kg VK-GW336 DN 65/80 (SQ 17) 17/19 mm 25 mm 0.6 kg VK-GW336 DN (SQ 19) 19/22 mm 25 mm 0.7 kg VK-GW336 DN 175/200 (SQ 24) 24/27 mm 30 mm 0.8 kg VK-GW336 DN (SQ 27) 27/32 mm 30 mm 1.2 kg D X3 11 L Special and cross-drilled holes available upon request X1 X2 Coupling GW336: ductile cast iron or stainless steel AISI304 Coupling made of finely cast stainless steel Article No. Suitable for valve X1/X2 X3 Weight D X VA-GW336 Service valves (SQ 12) 12/14 mm 20 mm 0.2 kg VA-GW336 DN 40/50 (SQ 14) 14/17 mm 25 mm 0.5 kg VA-GW336 DN 65/80 (SQ 17) 17/19 mm 25 mm 0.6 kg VA-GW336 DN (SQ 19) 19/22 mm 25 mm 0.7 kg VA-GW336 DN 175/200 (SQ 24) 24/27 mm 30 mm 0.8 kg VA-GW336 DN (SQ 27) 27/32 mm 30 mm 1.2 kg 11 L X1 X2 DALMINEX info@dalminex.de Page 17

18 NOTES Technische Änderungen vorbehalten! SABRINA CD SABRINA CREATIVE DESIGN Seite 18 DALMINEX DIN A4 1 mm grey

19 NOTES SABRINA CD SABRINA CREATIVE DESIGN DALMINEX Technische Änderungen vorbehalten! DIN A4 1 mm grey Seite 19

20 Presented by: DALMINEX GmbH Helleforthstrasse 87 D Schloss Holte-Stukenbrock Phone: 0049 (0) Telefax: 0049 (0) info@dalminex.de Internet:

Factor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :

Factor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : : Nominal Max. valve 4) Valve Valve attachment Type Reduction ratio EN ISO 5210 Factor 1) Nominal Gearbox Max. input s Input shaft 2) Weight 3) Option DIN 3210 Option [kg] 120 60 GK 10.2 1:1 0.9 135 66 20

More information

Factor 1) Modulating torque 4) [Nm]

Factor 1) Modulating torque 4) [Nm] Nominal Max. valve Modulating 4) Valve Valve attachment Gearbox Reduction ratio Standard EN ISO 5210 Factor 1) Nominal Gearbox Max. input s Modulating Input shaft 2) Weight 3) Option DIN 3210 Standard

More information

Valve attachment Gearbox Reduction ratio :1 5) : ,

Valve attachment Gearbox Reduction ratio :1 5) : , Nominal Max. valve 4) Valve Valve attachment Gearbox Standard EN ISO 5210 Option DIN 3210 120 60 GST 10.1 250 120 GST 14.1 Nominal Max. input s Gearbox Factor 1) Input shaft 2) Weight 3) Standard [mm]

More information

Handwheels, handles, position indicators

Handwheels, handles, position indicators Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium

More information

Profile rollers PEVOLON PEVOLASTIC

Profile rollers PEVOLON PEVOLASTIC Profile rollers 148 Profile rollers product overview Profile rollers FLANGED/GROOVED WHEELS We produce a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities

More information

The HYDROMAT. Technical Information Since The HYDROMATEN KG is a company of the Tröger + Entenmann corporate group, Heidelberg

The HYDROMAT. Technical Information Since The HYDROMATEN KG is a company of the Tröger + Entenmann corporate group, Heidelberg The HYDROMAT Technical Information Since 1953 The HYDROMATEN KG is a company of the Tröger + Entenmann corporate group, Heidelberg Product overview + Supply capability Nominal diameters Nominal pressure

More information

BUTTERFLY VALVE 17 SERIES Gearbox

BUTTERFLY VALVE 17 SERIES Gearbox DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

More information

Page 6. Page 6. Page 6. Page 7. Page 8. Page 9. Page 10 / 11

Page 6. Page 6. Page 6. Page 7. Page 8. Page 9. Page 10 / 11 Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets

More information

Cast Iron Valves. Product Information. It s all at Albion

Cast Iron Valves. Product Information. It s all at Albion Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS

More information

Pressure reducing valve Pressure reducing valve in straightway form DN

Pressure reducing valve Pressure reducing valve in straightway form DN Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast

More information

Excess pressure regulator Excess pressure regulator, straight through DN

Excess pressure regulator Excess pressure regulator, straight through DN ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm

More information

BUTTERFLY VALVE - WAFER FAF 3500

BUTTERFLY VALVE - WAFER FAF 3500 PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic

More information

Stafsjö Valves AB. SE Stavsjö, Sweden. Tel: +46 (0) Fax: +46 (0) A Bröer Group company

Stafsjö Valves AB. SE Stavsjö, Sweden. Tel: +46 (0) Fax: +46 (0) A Bröer Group company Product: W W Stafsjö s knife gate valve W is a bi-directional valve with full bore. It is made to handle different liquids, especially in water, waste water and biogas plants. The W valve is designed of

More information

Product catalogue. Mechanical accessories for pumps and mixers

Product catalogue. Mechanical accessories for pumps and mixers Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15

More information

LATEST ARRIVALS CATALOGUE STOCK

LATEST ARRIVALS CATALOGUE STOCK LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL

More information

Butterfly valves ARI-ZIVA -Z / ARI-ZIVA -G. with notch lever. with worm gear. with electric rotary actuator rotork

Butterfly valves ARI-ZIVA -Z / ARI-ZIVA -G. with notch lever. with worm gear. with electric rotary actuator rotork Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets

More information

Butterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range

Butterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z / ARI-ZIVA -G Butterfly valves ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly

More information

Datasheet ERHARD ECLI butterfly valve

Datasheet ERHARD ECLI butterfly valve Datasheet ERHARD ECLI butterfly valve Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial applications: One of these is the gate valve, which was developed

More information

Ref ALL POSITIONS CAST IRON CHECK VALVE PN16. Model/Ref:

Ref ALL POSITIONS CAST IRON CHECK VALVE PN16. Model/Ref: Model/Ref: 363-366 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. ISO PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications

More information

KNIFE GATE VALVE Product Ref. : KG02W/KG02L

KNIFE GATE VALVE Product Ref. : KG02W/KG02L General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective

More information

Type / Material code Body* Disc Stem Lining**

Type / Material code Body* Disc Stem Lining** Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.

More information

Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C)

Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Fig. 070 Page 2 ARI-EURO-WEDI - Fig. 071 Page 2 Fig. 070 ARI-EURO-WEDI - Hood valve Fig.

More information

with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 ARI-STEVI 423 Electric actuator ARI-PREMIO

with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 ARI-STEVI 423 Electric actuator ARI-PREMIO with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel Additional devices available, e.g.

More information

Full Bore Diaphragm Valve, Metal

Full Bore Diaphragm Valve, Metal Full Bore Diaphragm Valve, Metal Construction The GEMÜ motorized 2/2 way full bore diaphragm valve is fitted with a motor/control units made by AUMA. Features Optional rubber lining particularly suitable

More information

ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing

ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO

More information

Product features & Overview. N1 - N4 A Rotary and part-turn actuators

Product features & Overview. N1 - N4 A Rotary and part-turn actuators Product features & Overview N1 - Rotary and part-turn actuators 20 N1 - Rotary and part-turn actuators Rotary and part-turn actuators Product features Wide torque range Wide selection of output shafts

More information

ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing

ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO

More information

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

More information

with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE

with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure

More information

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle. Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing

More information

Flanged Ball Valves KHBF / KHMF / KHMFF

Flanged Ball Valves KHBF / KHMF / KHMFF Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)

More information

KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES

KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2

More information

Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units

Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate

More information

Sewage transport Submersible pumps

Sewage transport Submersible pumps Series description Wilo-Rexa FIT Available from January 2012 Construction Submersible sewage pump with cast iron hydraulics and stainless steel motor Type key Example: Wilo Rexa FIT V06DA-110/EAD1-2-T0015-540-A

More information

Butterfly valves. Introduction. Made of ductile cast iron

Butterfly valves. Introduction. Made of ductile cast iron Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international

More information

ARI-ZESA / ARI-GESA / THEA Butterfly valves

ARI-ZESA / ARI-GESA / THEA Butterfly valves ARI-ZESA - Fig. 012 - Free of maintenance butterfly valve with elongated eyelets - soft sealed ARI-GESA - Fig. 013 - Free of maintenance butterfly valve with threaded eyelets - soft sealed / THEA Butterfly

More information

GTK 80. Technical data

GTK 80. Technical data Industrial square suspension system with open cable duct for heavy loads Modular construction with free accessible cable duct Floor, top-mounting or wall exit options Technical data Material: connecting

More information

Data sheet Knife gate valve WB PN10 DN

Data sheet Knife gate valve WB PN10 DN Page: 1(7) Introduction The Stafsjö WB knife gate valve is a bi-directional seated valve with full bore. Its main applications are different liquids at water, waste water and biogas plants. The WB is designed

More information

Air vane motors for special applications

Air vane motors for special applications Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high

More information

ARI-STEVI BBD 415 (DN25-50) Straight through blow down valve

ARI-STEVI BBD 415 (DN25-50) Straight through blow down valve With pneumatic actuator ARI-STEVI BBD 415 (DN25-50) Straight through blow down valve ARI-STEVI BBD 415 Pneumatic actuator Required air supply pressure max. 6 bar Options: - Assembly of additional devices

More information

PN63 - PN160. with electric and pneumatic actuators. Control valve in straightway form with flanges and butt weld ends (shoed ends) DN

PN63 - PN160. with electric and pneumatic actuators. Control valve in straightway form with flanges and butt weld ends (shoed ends) DN with electric and pneumatic actuators Control valve in straightway form with flanges and butt weld ends (shoed ends) DN 15-100 PN63 - PN160 ARI-STEVI 472 Electric actuator ARI-PREMIO Enclosure IP 65 2

More information

STEVI 440 / 441. Straight through control valve DN

STEVI 440 / 441. Straight through control valve DN with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.

More information

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear

More information

Reduction ratio. Factor 1)

Reduction ratio. Factor 1) Max. valve torque to [Nm] 90,000 63,000 125,000 125,000 64,000 250,000 250,000 Valve Flange according to EN ISO 5211 F40 200 F48 250 F60 315 Gearbox/primary Factor 1) Gearbox Turns for 90 Input shaft 2)

More information

ERHARD is a company of. Data sheet ERHARD needle valves

ERHARD is a company of. Data sheet ERHARD needle valves ERHARD is a company of Data sheet ERHARD needle valves ERHARD RKV needle valves The innovative needle valve with the four positive points Based on decades of experience in the design and production of

More information

with electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426

with electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426 with electric and pneumatic actuators Control valve straight through with V-port plug DN 300-500 ARI-STEVI 425 / 426 Electric actuator AUMA SAR with LE Electric multiturn actuator capable of high closing

More information

Technische Dokumentation Technical Documentation

Technische Dokumentation Technical Documentation Technische Dokumentation Technical Documentation XOMOX Fully Lined Check Valves Dok. Nr.: tdb_check_gb XOMOX International GmbH & Co. Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008 Table

More information

Stirrup-shaped handles, machine handles, apparatus handles

Stirrup-shaped handles, machine handles, apparatus handles Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles

More information

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging

More information

2 PIECES BALL VALVE PN63

2 PIECES BALL VALVE PN63 2 PIECES BALL VALVE PN63 Model/Ref: 176 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN

More information

Knife gate valve HG - Standard

Knife gate valve HG - Standard Knife gate valve HG - Standard V R Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve HG Stafsjö s knife gate valve HG has excellent flow

More information

VALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67

VALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67 VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control

More information

Rectangular Valve Type RA

Rectangular Valve Type RA Rectangular Valve Type 2 Technical Description Rectangular Valve Type with flanges drilled according to DIN 24193 T3 and pneumatic cylinder Exploded view of a standard with a swing through steel disk and

More information

ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901

ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901 ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2

More information

Pressure relief controller AVA (PN 25)

Pressure relief controller AVA (PN 25) Data sheet Pressure relief controller AVA (PN 25) Description AVA is a self-acting pressure relief controller primarily for use in district heating systems. The controller is normally closed and opens

More information

with electric actuators Feedwater control valve with pump spill back DN

with electric actuators Feedwater control valve with pump spill back DN ARI-STEVI 453 with electric actuators Feedwater control valve with pump spill back DN 25-100 ARI-STEVI 453 Electric actuator ARI-PREMIO 2,2-15 kn ARI-PREMIO-Plus 2G 2,2-15 kn Enclosure IP 65 2 torque switches

More information

Materials : Cast iron or Stainless steel

Materials : Cast iron or Stainless steel Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars

More information

BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE

More information

ERHARD is a company of. Datasheet ERHARD ERK tilting-disc check valve

ERHARD is a company of. Datasheet ERHARD ERK tilting-disc check valve ERHARD is a company of Datasheet ERHARD ERK tilting-disc check valve The universal check valve with double excentric valve disc A key component of the is the valve disc which has a freely oscillating,

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on

More information

Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper

More information

SWING CHECK VALVE ISO PN16

SWING CHECK VALVE ISO PN16 Model/Ref: 360-362 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to 200 ISO PN10/16 flanges - 10 C + 80 C with EPDM seat, 120 C with Metal seat Max Pressure : 16 Bars

More information

BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE

More information

Swing Check Valves - Series 41

Swing Check Valves - Series 41 Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.

More information

OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS

OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION

More information

Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate

More information

Doors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)

Doors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5) Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable

More information

Technical Data. Sizes 2 in. to 24 in. (DN50 to DN600) Approvals UL and ULC Listed FM Approved

Technical Data. Sizes 2 in. to 24 in. (DN50 to DN600) Approvals UL and ULC Listed FM Approved Worldwide Contacts www.tyco-fire.com Model TJP Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator General Description TYCO Model TJP Resilient-Seated Gate Valves with Vertical and

More information

Diaphragm Valve MV 310

Diaphragm Valve MV 310 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation

More information

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400

More information

Product features & Overview. KA Linear actuators

Product features & Overview. KA Linear actuators Product features & Overview Linear actuators 66 Linear actuators Linear actuator Product features Wide range of force outputs Solid metal housing Large stroke range Maintenance-free gearbox Wide range

More information

2 PIECES BALL VALVE PN63

2 PIECES BALL VALVE PN63 2 PIECES BALL VALVE PN63 Model/Ref: 220 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges ISO PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200

More information

DATA BOOKLET LSD SERIES. Suction Diffusers. Pumps Motors ISO 9001 Company. Catalogue Pumping Solution

DATA BOOKLET LSD SERIES. Suction Diffusers. Pumps Motors ISO 9001 Company. Catalogue Pumping Solution SERIES DATA BOOKLET Suction Diffusers Pumps Motors ISO 9001 Company Catalogue 2011 Pumping Solution CONTENTS INTRODUCTION Page 3 FEATURES AND BENEFITS Page 3 DESIGN FEATURES Page 4 MATERIAL OF CONSTRUCTION

More information

4 01 ta l o g u e 2 Ca P R i c e L I S T

4 01 ta l o g u e 2 Ca P R i c e L I S T Catalogue 2014 The Complete Product Range The compression fittings: Our Gebo Quick the universal compression fittings are available for steel pipes of 1/2" to 2" diameter, for black steel pipes of 20 mm

More information

Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet

More information

ARI-DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP

ARI-DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP32 ARI-DP33 Pneumatic actuator Page 2 DP-Actuator Extended stem on air failure ARI-DP34 Pneumatic

More information

Linear actuator. Product features. Overview. Solid metal housing. Constant positioning times under fluctuating loads

Linear actuator. Product features. Overview. Solid metal housing. Constant positioning times under fluctuating loads Linear actuator VK Product features Constant positioning times under fluctuating loads Solid metal housing Up to four auxiliary position switches possible Maintenance-free gearbox Wide selection of valve

More information

ARI-PACO 2G 1,6 D/Y. Electric thrust actuator. Electric thrust actuator ARI-PACO 2G 1,6 D/Y. Electric thrust actuator. ARI-PACO 2G 1,6 D 1,6 kn

ARI-PACO 2G 1,6 D/Y. Electric thrust actuator. Electric thrust actuator ARI-PACO 2G 1,6 D/Y. Electric thrust actuator. ARI-PACO 2G 1,6 D 1,6 kn ARI-PACO 2G 1,6 D/Y Electric thrust actuator Electric thrust actuator ARI-PACO 2G 1,6 D/Y Electric thrust actuator ARI-PACO 2G 1,6 D 1,6 kn Input signal: 3-point Optional: Potentiometer Additional limit

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut

More information

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator

More information

ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal

ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges TA

More information

XV en /5 XV Knife gate valve DN

XV en /5 XV Knife gate valve DN -80-800-en-04 1/5 The Stafsjö knife gate valve is a compact bi-directional valve with full bore. The valve is specially designed with regard to good flow characteristics and simple maintenance which makes

More information

BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR

BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH

More information

MADE OF STAINLESS... Certificate 3.1

MADE OF STAINLESS... Certificate 3.1 MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Rising rotating

More information

Catalogue Easy inside

Catalogue Easy inside Catal ogue 2.2010 The complete product range Mini Middle Page 4: Unifix Mini: The small, light and quick repair solution for sealing holes, fractures and porous areas in water-bearing pipes. Suitable for

More information

Double regulating and commissionig valves Hydrocontrol F cast iron, PN 16 Hydrocontrol FR bronze, PN 16 Hydrocontrol FS nodular cast iron, PN 25

Double regulating and commissionig valves Hydrocontrol F cast iron, PN 16 Hydrocontrol FR bronze, PN 16 Hydrocontrol FS nodular cast iron, PN 25 Hydrocontrol FR bronze, PN 16 Hydrocontrol FS nodular cast iron, PN 25 The Oventrop Quality Management System is certified to DIN-EN-ISO 9001 Technical Information Application: Oventrop double regulating

More information

ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP

ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem

More information

ARI-STEVI 470 / ANSI (DN25-200)

ARI-STEVI 470 / ANSI (DN25-200) With pneumatic and electric actuators Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 - ANSI Pneumatic actuator ARI-DP 32-35 Reversible

More information

STEVI 440 / 441. Straight through control valve DN

STEVI 440 / 441. Straight through control valve DN with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.

More information

PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges

PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges Stuffing box valve Stop valve with gland seal - metallic sealing ARI-STOBU - Straight through with flanges PN63 - PN160 Forged steel High temperature steel Fig. 006 Seite 2 ARI-STOBU - Straight through

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE 11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off

More information

KNIFE GATE VALVES -- MODEL A

KNIFE GATE VALVES -- MODEL A PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat

More information

AVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)

AVK (WWE) BUTTERFLY VALVE DN (3 to 32) 75 (EVML) AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO

More information

Dual Plate Check Valve

Dual Plate Check Valve Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For

More information

Pressure reduction controllers (PN 25) AVDS - for steam AVD - for water

Pressure reduction controllers (PN 25) AVDS - for steam AVD - for water Data sheet Pressure reduction controllers (PN 25) - for steam AVD - for water Description Main data AVD: DN 15-50 k VS 0,4-25 m 3 /h PN 25 Setting range: 1-5 bar / 3-12 bar Temperature: - Circulation water/glycolic

More information

Differential pressure relief controller (PN 16, 25, 40) AFPA / VFG 2(1)

Differential pressure relief controller (PN 16, 25, 40) AFPA / VFG 2(1) Data sheet Differential pressure relief controller (, 25, 40) AFPA / VFG 2() Description The controller has a control valve, an actuator with one control diaphragm and spring for differential pressure

More information

AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)

AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS) Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /

More information

STAF, STAF-SG. Balancing valves PN 16 and PN 25 DN

STAF, STAF-SG. Balancing valves PN 16 and PN 25 DN STAF, STAF-SG Balancing valves PN 16 and PN 25 DN 20-400 IMI TA / Balancing valves / STAF, STAF-SG STAF, STAF-SG A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing valve that delivers accurate

More information

Differential pressure relief controller AFPA / VFG 2 (VFG 21)

Differential pressure relief controller AFPA / VFG 2 (VFG 21) Differential pressure relief controller AFPA / VFG 2 (VFG 21) Description AFPA VFG2 (VFG 21) is a self-acting differential pressure relief controller primarily for use in district heating systems. The

More information

VACOMASS. Technical information VACOMASS control valve. Version Diaphragm control valve with central or falling flow axis

VACOMASS. Technical information VACOMASS control valve. Version Diaphragm control valve with central or falling flow axis VACOMASS Technical information Diaphragm control valve with central or falling flow axis Version 2012-02 DESCRIPTION OF CONSTRUCTION AND FUNCTION SPECIAL CHARACTERISTICS: Universal use: The slidegate valve

More information