Glass door fittings Glass door hinges Glass door knobs Inset handles for glass doors Glass door handle Glass door stop

Size: px

Start display at page:

Download "Glass door fittings Glass door hinges Glass door knobs Inset handles for glass doors Glass door handle Glass door stop"

Shannon Summers
5 years ago
Views:

1 4c Glass door fittings Glass door hinges Glass door knobs Inset handles for glass doors Glass door handle Glass door stop

2 Overview Pages 39, Page Pages 400, Pages 402, Page Page Page Page Page Page Page Page Page FSB Manual 2012

Fittings for glass doors Glass has always had a multi-layered role in architecture as a design tool and shape-giving material. Glass doors take the interior architectural shape into account.

The lock area, handle and hinges are what give a glass door its look.

This fitting concept is notable for the absence of any handle roses (including on the heavy-duty version) and for the extremely discreet dimensions, but no less importantly for the fact that when DIN

3 Fittings for glass doors Glass has always had a multi-layered role in architecture as a design tool and shape-giving material. Glass doors take the interior architectural shape into account. They create more light, link rooms, and radiate a wonderful atmosphere. The transparency of glass doors requires a particularly high level of care when choosing the fittings. The lock area, handle and hinges are what give a glass door its look. With this in mind, we would like to point out one particular solution for a glass door fitting that FSB developed in collaboration with Ingenhoven Architekten. This fitting concept is notable for the absence of any handle roses (including on the heavy-duty version) and for the extremely discreet dimensions, but no less importantly for the fact that when DIN frames are used, flush installation makes it absolutely appealing on every level. A number of additional components by Gira (installation system for ITS 30 partition systems), Mabeg (Comform orientation system) and Inotec (escape route lighting system ITS 30) are available that match the proportions of the glass door fittings. Please contact the manufacturers for full product information. Nor should we forget the particularly charming detail of the glass door fittings of series : the dividing line on handle 107 is congruent with the edge of the glass door fitting. Colour can also be introduced if desired: the glass door fitting and handle set can also be powder-coated in any colour on the RAL colour chart. Fittings in the series / can optionally be fitted with or without a rose handle set, which offers the option to use door handle sets with AGL heavy-duty bearings for heavy or large-sized glass doors. Glass door fittings with the electric access control function (system EZK) match the consistent design of the FSB handle ranges. What makes these fittings so innovative and unique on the market is that they can also be fitted to all-glass doors and used for an electronic access control function that operates on a number of buildings, so these concepts are no longer limited to active or inactive leaf doors. You will find detailed information on page 41ff. There is also the option to fit the locks of the glass door fittings of series and with an anti-panic function (APD) in combination with EZK please state when ordering. Hinges to match the glass door fittings are the perfect complement to the FSB programme. All of the fittings in this chapter can be combined with almost any of the door handles in the FSB programme. 4c 397

Glass door fi tting compact 13 4224 A13 4224 042 (R) 13 4224 052 (L) Glass door fitting, rectangular, compact, with cover plates, with heavy-duty glass lock (DIN

nickel-plated casting. Door handle heavy-duty bearing in aluminium/stainless steel, Teflon-coated, to match FSB door handles Ill.

4 Glass door fi tting compact A (R) (L) Glass door fitting, rectangular, compact, with cover plates, with heavy-duty glass lock (DIN , class 4) PC 72 mm, mm steel clamp nut with a polyamide bearing ring Trap made from a plastic / die casting combination, low-noise Bolt head made of bright nickel-plated casting. Door handle heavy-duty bearing in aluminium/stainless steel, Teflon-coated, to match FSB door handles Ill.: DIN right 56, ,2 41,6 20,5 9 16,1 fsb.de/ The door handle shown here is a design suggestion. Can be combined with almost any FSB door handle. Please state direction with order 39 FSB Manual 2012

5 Lock case compact for double-leaf doors B (R) (L) Lock case, rectangular, compact, to match glass door fitting (R) (L) Ill.: DIN left 4c 56, ,2 16, ,2 R ,1 fsb.de/ Please state direction with order 399

Glass door fittings 13 4220 C13 4220 041 (R) 13 4220 051 (L) B13 4220 042 (R) 13 4220 052 (L) Glass door fitting rectangular, with cover plates, with heavy-duty glass door lock (DIN 1 251-1, based on

6 Glass door fittings C (R) (L) B (R) (L) Glass door fitting rectangular, with cover plates, with heavy-duty glass door lock (DIN , based on class 4) PC 72 mm, mm steel clamp nut with a polyamide bearing ring Trap made from a plastic / die casting combination, low-noise (R) (L) PC-ready, bolt head made of bright nickelplated casting, door handle bushing made of glass fibre reinforced polyamide, suitable for FSB door handle (R) (L) PC-ready with switch, bolt head made of bright nickel-plated casting, prepared for the installation of rose sets Standard and FSB heavy-duty fittings with AGL bearing in rose version Also available as an EZK version (see page 41 ff.) and with self-locking anti-panic lock Ill.: DIN right 56, ,5 21,5 96 fsb.de/ The door handle shown here is a design suggestion. Can be combined with almost any FSB door handle. Please state direction with order 400 FSB Manual 2012

Lock case for double-leaf doors 13 4220 B13 4220 045 (R) 13 4220 055 (L) Lock case rectangular to match glass door fittings 13 4220 041 (R) 13 4220 051

7 Lock case for double-leaf doors B (R) (L) Lock case rectangular to match glass door fittings (R) (L) (R) (L) Ill.: DIN left 4c 56, ,5 21, fsb.de/ Please state direction with order 401

8 Glass door fi ttings C (R) (L) B (R) (L) Glass door fitting, rectangular, rounded, with cover plates, with heavy-duty glass lock (DIN , based on class 4) PC 72 mm, mm steel clamp nut with a polyamide bearing ring Trap made from a plastic/die casting combination, low-noise (R) (L) PC-ready, bolt head made of bright nickelplated casting, door handle bushing made of glass fibre reinforced polyamide, suitable for FSB door handle (R) (L) PC-ready with switch, bolt head made of bright nickel-plated casting, prepared for the installation of rose sets Standard and FSB heavy-duty fittings with AGL bearing in rose version Also available as an EZK version (see page 41 ff.) and with self-locking anti-panic lock Ill.: DIN right 56, ,5 21,5 96 fsb.de/ The door handle shown here has been allocated as a design element. Can be combined with almost any FSB door handle. Please state direction with order 402 FSB Manual 2012

Lock case for double-leaf doors 13 4223 B13 4223 045 (R) 13 4223 055 (L) Lock case, rectangular, rounded, to match the glass door fittings 13 4223 041 (R) 13

9 Lock case for double-leaf doors B (R) (L) Lock case, rectangular, rounded, to match the glass door fittings (R) (L) (R) (L) Ill.: DIN left 4c 56, ,5 21, fsb.de/ Please state direction with order 403

10 Glass door hinge rectangular BVARIANT glass door hinge made of chrome-plated matt steel to match FSB finish aluminium 0105 or stainless steel, with hinge connection to match glass door fittings of the series and VARIANT heavy-duty hinge for glass doors on rebated wood, steel or aluminium frames with three-dimensionally adjustable holding elements for glass doors on rebated steel frames with three-dimensionally adjustable holding elements for glass doors on rebated steel frames (R) (L) for glass doors on rebated wooden wraparound and block frames fsb.de/13422 Loading capacity: 60 kg, 2 hinges 90 kg, 3 hinges Glass door hinges prepared at the factory for glass thicknesss and 10 mm Further technical information on page 414 f. 404 FSB Manual 2012

11 Glass door hinge round BVARIANT glass door hinge made of chrome-plated matt steel to match FSB finish aluminium 0105 or stainless steel, with hinge connection to match glass door fittings of series c VARIANT heavy-duty hinge for glass doors on rebated wood, steel or aluminium frames with three-dimensionally adjustable holding elements for glass doors on rebated steel frames with three-dimensionally adjustable holding elements for glass doors on rebated steel frames (R) (L) for glass doors on rebated wooden wraparound and block frames fsb.de/ Loading capacity: 60 kg, 2 hinges 90 kg, 3 hinges Glass door hinges prepared at the factory for glass thicknesss and 10 mm Further technical information on page 414 f. 405

Doorknobs for glass doors 23 002 23 002 00007 Aluminium Stainless steel Bronze Brass X = 77 mm X = 73 mm X = 72 mm X = 72 mm Drill Ø 13 mm X 50 23 044 23 044 00007 Design: Jasper Morrison Drill Ø 13

12 Doorknobs for glass doors Aluminium Stainless steel Bronze Brass X = 77 mm X = 73 mm X = 72 mm X = 72 mm Drill Ø 13 mm X Design: Jasper Morrison Drill Ø 13 mm 0 52 fsb.de/23002 fsb.de/23044 Fixed knobs Fixed doorknobs are usually mounted directly on glass doors. A lock is not used. The doorknobs are connected by an mm square spindle (for two drill holes) when they are mounted. 406 FSB Manual 2012

13 Doorknobs for glass doors Drill Ø 13 mm 4c Aluminium Stainless steel Bronze Ø = 50 mm Ø = 55 mm Ø = 50 mm Drill Ø 13 mm 52 Ø fsb.de/2302 fsb.de/23029 Fixed knobs Fixed doorknobs are usually mounted directly on glass doors. A lock is not used. The doorknobs are connected by an mm square spindle (for two drill holes) when they are mounted. 407

14 Inset handles for glass doors Product no. B A mm 16 mm mm 1 mm mm 20 mm Glass thickness = B, total thickness = A open version pair, for inner and outer side glass cut-out Ø 70 mm mounted without adhesive, screwed in pair with through fixing using 3.9 mm countersunk screws, included in delivery A 75 4 B Product no. B A mm 20 mm mm 22 mm mm 24 mm Glass thickness = B, total thickness = A closed version pair, for inner and outer side glass cut-out Ø 70 mm mounted without adhesive, screwed congruntly in pairs using 3.9 mm countersunk screws, included in delivery A 75 4 B 2 fsb.de/ FSB Manual 2012

Glass door handle and door stop 36 36 Fixed in pairs and going through on one

B A 13 4230 000 mm 27 mm 13 4230 010 10 mm 29 mm 13 4230 012 12 mm 31 mm Glass

15 Glass door handle and door stop Fixed in pairs and going through on one side; see page 492 Design: Christoph Ingenhoven 4c Product no. B A mm 27 mm mm 29 mm mm 31 mm Glass thickness = B, total thickness = A B 25 A Ø 10 fsb.de/3636 fsb.de/

16 Technical information Fittings for glass doors Door handle fittings for glass door locks In addition to its own range of glass doors, FSB can also adapt its entire door handle/knob handle programme to the standard commercial glass door fittings manufactured by its competitors (with just a few exceptions). Just a few minor technical changes to the door handle connection and fixing order need to be taken into account. To prevent misunderstandings, the lock type should be given as precisely as possible when ordering door handles and door knobs for glass door locks (e. g. the manufacturer s name and order number). Door handles for glass doors Door handles with round or oval cross sections can be used in lots of different ways for opening glass doors or as safety handle constructions and as design elements with special fixing tools for mounting in pairs or individually. FSB can utilise existing special solutions for glass doors and also develop individual handle designs. You will find the standard fixing solutions for glass doors and the individually available door handle models starting on page 419. Please order in plenty of time to allow for the adaptation to be carried out. Delivery ex warehouse is not possible. Glass doot fitting compact FSB glass door fitting closes flush with DIN frames, and combines the door frame and fitting in a single visual unit. Of course, non-din frames can also be used, but in this case we cannot guarantee that they will fit flush against the frame. Can also be used in combination with partition wall systems. The transparency of the glass door is enhanced by the discreet dimensions of the lock cover, which at 170 x 9 mm is some 10 % less than on other glass door fittings. This reduction is achieved thanks to the development of a special lock that is easily on a par with the solidity and function of other large locks, and furthermore is suitable for all glass door sizes. We have also developed a special heavy-duty bearing in the form of a Teflon-coated bearing sleeve that encompasses the door handle along its entire guide length, and can also cope with the mechanical loads associated with large-sized glass doors. Designs: deadlock (LL) without key hole bathroom / WC: Please state when ordering, since the fittings are prepared at the works for the WC locking set as standard. The WC lock is mounted on-site, and is to be ordered separately. Order information for Door handles are not included in the delivery of glass door fittings. When ordering, please provide the following information and refer to the glass doors and fitting: the desired door handle design the fitting design for standard or heavyduty bearing the DIN direction Designs for deadlock (LL) without key hole bathroom/wc fittings prepared for WC lock sets from FSB s delivery programme (see page 23). Please order WC lock sets separately; assembly on-site. Dimensions for Dimensions based on glass thickness mm. The glass door fittings and lock cases are prepared at the works for glass thicknesses and 10 mm ( on enquiry). 410 FSB Manual 2012

17 Door dimensions to DIN for frame dimension for frame dimension , ,5 hinge reference line ,5 hinge reference line for frame dimension for frame dimension 193 4c ,5 hinge reference line 35,5 hinge reference line (R) (L) (R) (L) Approximate carcass dimensions 750 x 2,000 mm 75 x 2,000 mm 1000 x 2,000 mm Frame rebate dimensions 716 x 1,93 mm 41 x 1,93 mm 966 x 1,93 mm Standard glass dimensions 709 x 1,972 mm 34 x 1,972 mm 959 x 1,972 mm Approximate carcass dimensions 750 x 2,125 mm 75 x 2,125 mm 1000 x 2,125 mm Frame rebate dimensions 716 x 2,10 mm 41 x 2,10 mm 966 x 2,10 mm Standard glass dimensions 709 x 2,097 mm 34 x 2,097 mm 959 x 2,097 mm 411

18 Series and Door handle specification 20,5 42 Glass door fittings of the series /051 and /051 specifically require these matching door handle pairs with a shorter door handle base on one side. When ordering, this specification will be made by our sales staff. Bearings Glass door fittings of the series /052 and /052 (rose set version) can be fitted either with standard bearings or with AGL bearings ,5 54 CStandard BAGL Profile cylinder min. 27,5 min. 27,5 55 For aesthetic reasons, profile cylinders 27.5/27.5 mm long are recommended for all glass door fittings because of the comparatively small cylinder projection. Bathroom and WC versions The glass door fittings can also all be used as a bathroom/wc version. The series and can be fitted with any WC bolt in FSB s delivery programme (see page 23). Please order separately for fitting on-site ,5 The fittings are equally suitable for doors that open inwards and outwards. fsb.de/ fsb.de/ FSB Manual 2012

19 Series Door handle specification 20,5 41,6 The glass door fittings of series /052 require special door handle pairs with a different pin projection from the FSB standard. When ordering, this specification will be made by our sales staff. Bearing In series /052, the bearing elements are integrated in the shape of a suitable Teflon-coated bearing sleeve that encompasses the handle shank along its entire guide length and can reliably withstand the mechanical loads that occur on heavy-duty glass doors. Does not require additional roses with heavy-duty bearings. BSuitable bearings 4c Profile cylinder 29,3 9 20,3 25 (27,5) 25 (27,5) 50 (54) For aesthetic reasons, profile cylinders 25/25 mm or 27.5/27.5 mm long are recommended for all glass door fittings because of the comparatively small cylinder projection. Profile cylinders 25/25 mm can be checked for their suitability in lock systems in individual cases. Bathroom and WC versions 29,3 20,5 Please state WC version when ordering. A special WC bolt set is required for this fitting. The fittings are equally suitable for doors that open inwards and outwards. fsb.de/

20 Hinge connections and , ,5 35,5 35, hinge reference line hinge reference line hole Ø 16 mm hole Ø 16 mm ,5 35, , hinge reference line hinge reference line hole Ø 16 mm hole Ø 16 mm The hinge connections and their position to the hinge reference line need to be aligned to the drill holes in the glass door. Please note this requirement in connection with FSB heavy-duty hinges or , and or in particular. 414 FSB Manual 2012

21 Frame connection dimension and VARIANT heavy-duty hinge for glass doors on rebated wood, steel or aluminium frames with three-dimensionally adjustable holding elements VX aligned for all-glass doors with a standard vertical drilling diagram for glass thicknesses and 10 mm no-twist screw pin concealed maintenance-free axial-radial plain bearing can be combined with holding element: for block frames VX D for lining frames VX D for block frames VX D for steel frames VX D VX D for aluminium frames VX D can be used on right and left VARIANT heavy-duty hinge for glass doors on rebated steel frames with three-dimensionally adjustable holding elements aligned for all-glass doors with a standard vertical drilling diagram for glass thicknesses and 10 mm no-twist screw pin concealed maintenance-free axial-radial plain bearing can be combined with holding element VN 760/120 3D can be used on right and left 4c VARIANT heavy-duty hinges for glass doors on rebated steel frames for holding elements V 600 or V 610 can be used on right and left 30 17,5 35 aligned for all-glass doors with a standard vertical drilling diagram for glass thicknesses and 10 mm 30 17,5 11,5 22 VARIANT heavy-duty hinge for glass doors on rebated wooden wrap-around and block frames aligned for all-glass doors with a standard vertical drilling diagram for glass thicknesses and 10 mm for holding elements series V 3600, V 3610, V 3630, V 3650, V 3690 and terminal block V 3604 or V 3607 DIN direction required Please refer to the current SIMONSWERK manual for further information on hinges, hinge connections, frame fixing elements etc. 415

Knob handles Doorknobs Knobs & backplates

262 266 274 Knob handles Doorknobs Knobs & backplates Overview 08 0802 08 0803 Page 262 08 0804 Page 262 08 0826 Page 263 08 0828 Page 263 08 0829 Page 264 08 0844 Page 264 08 0880 Page 265 23 0802 Page