Door knobs Knob backplates

Transcription

1 Door knobs Knob backplates 4c Overview Technical information Knob handles Door knobs Knob backplates Pull handles on backplates

2 Overview 0802 Pages 171, 54, Page Page Pages 172, Page Page Pages 173, 0844 Page Page Page Pages 175, 54, Page Page Page Pages 182, Page Page Pages 176, 2333 Pages 181, Page Page Page Page Pages 177, Page Pages 179, 2346 Pages 179, Page Page

3 New products Bronze Brass 1904 Page Page Pages 188, Pages 184, 57, Pages 184, 57, Page Page 186 4c Pages 185, Pages 185, Page Page

4 Door knobs Knob handles Fixed knobs on roses Backplate with dead knob We supply knob handle sets as female pairs complete with a separate special-purpose FSB Stabil-spindle. To assemble, first construct a male handle from the spindle and one of the female parts, carefully inserting the grub screw supplied through the appropriate borehole. The grub screw passes through the neck of the knob and locates into the spindle. For the male knob to be correctly as sem bled it is generally neces sary for the head of the grub screw to lie flush with the outer surface of the neck of the knob. Thereafter, fixing is as for the FSB Stabil-spindle. Female knob handles can of course be fitted to rotate in a plate or rose on one side only using the customised FSB half-spindle. Door knobs can be riveted to roses to form dead knobs and can be fixed in one of two ways: and concealed face fixing Where concealed through fixing is required, we supply door knobs prepared for 5 mm bolts and reinforced with two lugs with standard mm centres. On the reverse, a lever handle rose of comparable technical design is used (FSB and ). The M5 screws are 45 mm in length, making them suitable for doors mm thick. For other door thicknesses, screws of the appropriate size should be used (FSB ). first involves screwing a steel base rose to the door. The dead knob is then positioned so as to precisely cover this and is secured with a grub screw. FSB also supplies door knobs rigidly mounted on backplates. These feature a 12 mm internal thread to accommodate the FSB Stabil-half-spindle pro - vided. Before fitting the plate, the spindle is firmly screwed into the shank of the knob. Backplate and spindle are then fitted to the door and the pro - cedure is repeated on the reverse. In this configuration, the door knob can be fastened to an FSB lever handle on the reverse by means of an FSB halfspindle screwed into the 12 mm threaded neck of the knob. 170

5 Knob handles (X = 70 mm) (X = 70 mm) (X = 66 mm) Bronze (X = 65 mm) Brass (X = 65 mm) X Stainless Steel 8 mm Δ-hole c 8 mm Δ-hole mm Δ-hole 75 Design: Jasper Morrison Turnable knob handles are made and supplied by FSB as female sections. Knobsets are created by joining two female parts together using the FSB Stabil spindle Adaptor sleeve 8 on 7 mm cf. page

6 Knob handles mm Δ-hole Bronze 65 8 mm Δ-hole Design: Christoph Mäckler Turnable knob handles are made and supplied by FSB as female sections. Knobsets are created by joining two female parts together using the FSB Stabil spindle Adaptor sleeve 8 on 7 mm cf. page

7 Knob handles Ø 0829 Bronze (Ø = 50 mm) (Ø = 50 mm) (Ø = mm) (Ø = 50 mm) mm Δ-hole 4c mm Δ-hole Design: Christoph Ingenhoven Turnable knob handles are made and supplied by FSB as female sections. Knobsets are created by joining two female parts together using the FSB Stabil spindle Adaptor sleeve 8 on 7 mm cf. page

8 Knob handles r.h. 45 l.h. 8 mm Δ-hole Design: Hartmut Weise mm Δ-hole Turnable knob handles are made and supplied by FSB as female sections. Knobsets are created by joining two female parts together using the FSB Stabil spindle Adaptor sleeve 8 on 7 mm cf. page

9 Door knobs 50 X (X = 77 mm) (X = 77 mm) (X = 73 mm) Bronze (X = 72 mm) Brass (X = 72 mm) 50 X (X = 77 mm) (X = 77 mm) (X = 73 mm) Bronze (X = 72 mm) Brass (X = 72 mm) 4c

10 Door knobs Ø Bronze (Ø = 50 mm) (Ø = 50 mm) (Ø = mm) (Ø = 50 mm) 52 Ø Bronze (Ø = 50 mm) (Ø = 50 mm) (Ø = mm) (Ø = 50 mm)

11 Door knobs c Design: Jasper Morrison Brass Brass

12 Door knobs Design: Christoph Ingenhoven Design: Christoph Ingenhoven

13 Door knobs Bronze Bronze 4c

14 Door knobs r.h. 05 l.h r.h. 05 l.h. Design: Hartmut Weise

15 Door knobs 67, Bronze Design: Hans Kollhoff 4c r.h. 05 l.h. 58 Design: Philippe Starck

16 Door knobs Bronze Bronze Design: Christoph Mäckler

17 Door knobs c 82 Design: Jahn/Lykouria Suitable for backset bigger than 40 mm Design: Hadi Teherani

18 Knob backplates X (X = 77 mm) (X = 73 mm) Distance 72 mm with visible fixing Fixing template: 0453 cf. page X 21, X (X = 77 mm) (X = 77 mm) (X = 73 mm) Bronze (X = 72 mm) Brass (X = 72 mm) Distance mm with concealed fixing Fixing template: FSB 0477, cf. page (X = 77 mm) (X = 73 mm) Distance mm with visible fixing X 75,5 21,5 134, (X = 77 mm) (X = 77 mm) (X = 73 mm) Bronze (X = 72 mm) Brass (X = 72 mm) Distance 70, mm with concealed fixing Fixing template: FSB 0476, cf. page 579 * except FSB Keyholes 184

19 Knob backplates Distance 72 mm with visible fixing Fixing template: FSB 0453, cf. page , Bronze Distance mm with concealed fixing Fixing template: FSB 0477, cf. page 578 4c Distance mm with visible fixing ,5 21,5 134, Bronze Distance 70, mm with concealed fixing Fixing template: FSB 0476, cf. page 579 * except FSB Keyholes 185

20 Knob backplates Distance 72 mm Fixing template: FSB 0453, cf. page Distance 72 mm Keyholes 186

21 Knob backplates Distance 72 mm Fixing template: FSB 0453, cf. page 572 4c Distance mm Keyholes 187

22 Knob backplate Stainless Steel Brass 3 The knob backplate comes with a fixed knob and an FSB half-spindle. It is designed for door thicknesses from - 42 mm. The furniture is visibly fixed to the door using M4 sleeve nuts and threaded bolts. Design: Christoph Mäckler Keyholes 188

23 Pull handles on backplates Distance 72 mm 42 4c Distance 92 mm * except FSB 2121 Keyholes 189

24