Centre Door Knobs. Entrance/Exterior Door Furniture DF5:010. Fixings. How to Order. Finishes - See our price list or website for finish availability.

Size: px

Start display at page:

Download "Centre Door Knobs. Entrance/Exterior Door Furniture DF5:010. Fixings. How to Order. Finishes - See our price list or website for finish availability."

Mariah Bond
6 years ago
Views:

Centre Door Knobs Four modern contemporary designs of Centre Door Knob, all CNC

Coordinating Letter Plates, Door Knockers and Cylinder Pulls can be found within

3351 3365 Supplied with anti-rotation pin, finish matched dome nut and washer & M12

system. 3356 3366 3351/3356 3365/3366 63 63 1) select KNOB (e.g.

1 Centre Door Knobs Four modern contemporary designs of Centre Door Knob, all CNC machined from blocks of solid brass to produce perfect detailing and proportion. Coordinating Letter Plates, Door Knockers and Cylinder Pulls can be found within this section Supplied with anti-rotation pin, finish matched dome nut and washer & M12 x 75 allthread to suit doors up to 57mm thick (longer allthreads available upon request). Finish matched dome nut Pairs of Knobs are supplied with a back-to-back fixing system / / ) select KNOB (e.g. 3351) 2) add FINISH (e.g. 3351PBU) SQ SQ 76 3) To order a pair of Knobs with BACK-TO-BACK fixings add BTB (e.g. 3351PBU/BTB) custom sizes available upon request 6 25 Engraving available on all four knobs - please contact us for further details. DF5:010

Centre Door Knobs A selection of Art Deco and Classic Octagonal Centre Door Knobs.

lines. The 9464 and the two sizes of Octagonal Knob are of semi-solid construction, yet still retain substantial heft.

size P A 81 x 63 101 x 81 60 B 101 x 77 125 x 101 63 custom sizes available upon request 3361/76 65 70 x 108 51 x 88

suit doors up to 57mm thick (longer allthreads available upon request).

9464 9464 108 112 A/F 100 A/F 1) select KNOB (e.g. 2590) 2) add FINISH (e.g. 2590PBU) 2592 3) 3361 & 3376 only - add SIZE (e.

2 Centre Door Knobs A selection of Art Deco and Classic Octagonal Centre Door Knobs. The two sizes of 3361 & 3376 are CNC machined from blocks of solid brass to produce perfect detailing and superb clean lines. The 9464 and the two sizes of Octagonal Knob are of semi-solid construction, yet still retain substantial heft. A size shown B size shown 3361 (round edge design) 3376 (square edge design) P Plate size 25 SQ Knob size Knob size Plate size P A 81 x x B 101 x x custom sizes available upon request 3361/ x x 88 Supplied with anti-rotation pin, finish matched dome nut and washer & M12 x 75mm (except 9464: M10 x 75mm) allthread to suit doors up to 57mm thick (longer allthreads available upon request). Finish matched dome nut Pairs of Knobs supplied with back-to-back fixing system A/F 100 A/F 1) select KNOB (e.g. 2590) 2) add FINISH (e.g. 2590PBU) ) 3361 & 3376 only - add SIZE (e.g. 3361PBU/A) 4) To order a pair of Knobs with BACK-TO-BACK fixings add BTB (e.g. 2590PBU/BTB or 3361PBU/A/BTB). 2590/ shown 78 A/F A/F Engraving available on all four knobs - please contact us for further details A/F = dimension across flats DF5:020

Centre Door Knobs Four Centre Door Knob designs, three of which are available in two sizes.

The others are of semisolid construction, yet still retain substantial heft.

M12 x 75mm (except 2594: M10 x 75mm) allthread to suit doors up to 57mm thick (longer allthreads available upon

Finish matched dome nut P D (dia) d (dia) P (projection) 2594 A Ø 75 Ø 72 75 2594 B Ø 100 Ø 95 90 custom sizes

available upon request 1) select KNOB (e.g. 2594) 2) add FINISH (e.g. 2594PBU) 3) 2594, 2653 & 2591 add SIZE (e.g. 2594PBU/A).

3 Centre Door Knobs Four Centre Door Knob designs, three of which are available in two sizes. The two sizes of 2591 are CNC machined from blocks of solid brass to produce perfectly cut facets. The others are of semisolid construction, yet still retain substantial heft computer generated image Supplied with anti-rotation pin, finish matched dome nut and washer & M12 x 75mm (except 2594: M10 x 75mm) allthread to suit doors up to 57mm thick (longer allthreads available upon request). d D d D Pairs of Knobs supplied with back-to-back fixing system. Finish matched dome nut P D (dia) d (dia) P (projection) 2594 A Ø 75 Ø B Ø 100 Ø custom sizes available upon request P D (dia) d (dia) P (projection) 2653 A Ø 73 Ø B Ø 100 Ø custom sizes available upon request 1) select KNOB (e.g. 2594) 2) add FINISH (e.g. 2594PBU) 3) 2594, 2653 & 2591 add SIZE (e.g. 2594PBU/A). 4) To order a pair of Knobs with BACK-TO-BACK fixings add BTB (e.g. 1067PBU/BTB or 2594PBU/A/BTB). a/f A/F 76 A/F 72 A/F P A/F a/f P (projection) 2591 A A/F = dimension across flats 2591 B custom sizes available upon request DF5:030

Letter Plates Four CNC machined Letter Plates with inward opening sprung flaps.

side view 3354 side view 3359 Supplied with finish matched dome nuts and washers, M6 x 75mm allthreads to suit doors up to

Finish matched dome nut 1) select PLATE (e.g. 3359) 2) add FINISH (e.g. 3359PBU). NB.

4 Letter Plates Four CNC machined Letter Plates with inward opening sprung flaps. Interior Tidies, coordinating Centre Door Knobs, Door Knockers and Cylinder Pulls can be found within this section. side view 3354 side view 3359 Supplied with finish matched dome nuts and washers, M6 x 75mm allthreads to suit doors up to 57mm thick (longer allthreads available upon request) (round edge design) side view. Finish matched dome nut 1) select PLATE (e.g. 3359) 2) add FINISH (e.g. 3359PBU). NB. Exterior Letter Plate only supplied - for Interior Tidies see page DF5:050. side view 3379 (square edge design) 330 aperture size 250 x CUSTOM SIZES These Letter Plates can be specially manufactured in custom sizes if desired bolt centres DF5:040

Letter Plates & Interior Tidies Two Letter Plates with inward opening sprung flaps, both offered in all finishes

1101 1101 & 9453 supplied with finish matched dome nuts and washers, M6 x 75mm allthreads to suit doors up to 57mm

4 x 12mm wood screws. 9453 1) select PLATE/TIDY (e.g. 1101) 2) add FINISH (e.g. 1101PGU). 1101 & 1102 - add SIZE (e.g. 1101PGU/C).

1102 Overall size Aperture size 1101 A 254 x 89 179 x 46 ONLY B 305 x 95 230 x 47 C 356 x 127 278 x 55 ONLY D 406 x

5 Letter Plates & Interior Tidies Two Letter Plates with inward opening sprung flaps, both offered in all finishes including the solid bronzes; along with an Interior Tidy available in a variety of matching sizes & 9453 supplied with finish matched dome nuts and washers, M6 x 75mm allthreads to suit doors up to 57mm thick (longer allthreads available upon request). Finish matched dome nut 1102 supplied with finish matched no.4 x 12mm wood screws ) select PLATE/TIDY (e.g. 1101) 2) add FINISH (e.g. 1101PGU) & add SIZE (e.g. 1101PGU/C). 1101A, C & D available in solid ONLY bronze finishes only Overall size Aperture size 1101 A 254 x x 46 ONLY B 305 x x 47 C 356 x x 55 ONLY D 406 x x 76 ONLY x x Overall size Designed to work with Letter Plate code: A 305 x A/9453 B 356 x B/3354/ 3359/3364/3379 C 406 x C D 430 x D DF5:050

Door Knockers Three heavyweight Door Knockers, one classic

coordinate with Letter Plates, Centre Door Knobs and Cylinder

2564 135 x 110 Supplied with finish matched dome nuts and

(longer allthreads available upon request).

6 Door Knockers Three heavyweight Door Knockers, one classic Drop Ring and two modern contemporary square designs which coordinate with Letter Plates, Centre Door Knobs and Cylinder Pulls found within this section x 110 Supplied with finish matched dome nuts and washers, M6 x 75mm allthreads to suit doors up to 57mm thick (longer allthreads available upon request). Finish matched dome nut 1) select KNOCKER (e.g. 2564) 2) add FINISH (e.g. 2564PBU) x x 100 DF5:060

Door Knockers Three Art Deco period inspired Door Knockers, all

take on the classic Doctors Pattern Door Knocker.

x 44 Supplied with finish matched dome nuts and washers, M6 x

7 Door Knockers Three Art Deco period inspired Door Knockers, all well proportioned and of heavy, solid construction, and our take on the classic Doctors Pattern Door Knocker (round edge design) 149 x (square edge design) 149 x 44 Supplied with finish matched dome nuts and washers, M6 x 75mm allthreads to suit doors up to 57mm thick (longer allthreads available upon request). Finish matched dome nut 1) select KNOCKER (e.g. 9471) 2) add FINISH (e.g. 9471PBU) x x 55 DF5:070

8 Bell Pushes Six classic designs of concealed fix Bell Push - each offered in four different diameters - complementing the Allart Select Door Knob and Lever Rosettes in section ST3; all supplied with finish matched push buttons Supplied with subrose and no.4 x 13mm wood screws ) select PUSH (e.g. 7852) 2) add FINISH (e.g. 7852PBU) 3) add SIZE (e.g. 7852PBU/A) D A B C D D (diameter) Ø 44 Ø 54 Ø 64 Ø 76 Custom sizes available upon request - surcharge may apply. SUBROSE SUPPLIED DF5:080

9 Bell Pushes Two traditional and four contemporary designs of concealed fix Bell Push - each offered in up to four different diameters - complementing the Allart Select Door Knob and Lever Rosettes in section ST3; all supplied with finish matched push buttons Supplied with subrose and no.4 x 13mm wood screws ) select PUSH (e.g. 7854) 2) add FINISH (e.g. 7854PBU) 3) add SIZE (e.g. 7854PBU/A) (available in B, C & D size only) 7861 D A B C D D (diameter) Ø 44 Ø 54 Ø 64 Ø 76 Custom sizes available upon request - surcharge may apply. SUBROSE SUPPLIED DF5:090

10 Bell Pushes A selection of nine Bell Push designs - each offered in three sizes - complementing the Allart Select Door Knob & Lever Backplates (see section ST4), supplied with fully finish matched push buttons. All images shown below are B size (54mm) A size shown Supplied with finish matched no.6 x 19mm wood screws (square edge design) 2537 (round edge design) 2538 (B & C size only) 1) select PUSH (e.g. 2530) 2) add FINISH (e.g. 2530PBU) 3) add SIZE (e.g. 2530PBU/A). W A B C L L x W 44 x x x only 62 x x x 64 Custom sizes available upon request - surcharge may apply. DF5:100

Cylinder Pulls & Numerals Two designs of Cylinder Pull

A Cylinder Pull for use with dead-bolts on storeroom

A full set of Numerals (0-9) in Times New Roman Font

D d code Cylinder Type UK UK standard D (d) 32 29 US US

with spikes that embed into the door face.

rear. 1997 82 x 43 shown with euro cyl cutout (E) 1996 &

supplied. approx actual size 1997: 1) add FINISH (e.g.

1997PC/O) oval cyl cutout (O) standard keyhole (S) 0093

11 Cylinder Pulls & Numerals Two designs of Cylinder Pull for use in conjunction with rim cylinder night latches. A Cylinder Pull for use with dead-bolts on storeroom doors, with the option of Euro/Oval/ Keyhole cutouts. A full set of Numerals (0-9) in Times New Roman Font offered with rear fixing spikes. D d code Cylinder Type UK UK standard D (d) US US standard x x fitted with spikes that embed into the door face supplied with finish matched no.6 x 19mm wood screws & 9472 are fitted with an anti-rotation pin on the rear x 43 shown with euro cyl cutout (E) 1996 & 9472: 1) add FINISH (e.g. 1996PC) 2) add CYLINDER TYPE (e.g. 1996PC/UK or 1996PC/US) Please note - cylinder not supplied. approx actual size 1997: 1) add FINISH (e.g. 1997PC) 2) add PROFILE (e.g. 1997PC/O) oval cyl cutout (O) standard keyhole (S) high cutout for standard 32 x 18mm oval cylinder (larger cutouts available upon request) 0093: 1) add FINISH (e.g. 0093PC) 2) add NUMBER (e.g. 0093PC/3) A full selection of escutcheons and cylinder seating collars can be found in section DF6. DF5:110

Cylinder Pulls Four modern contemporary Cylinder Pulls

Door Knockers found within this section - each offered

12 19 57 13 50 3352 19 57 12 13 50 3357 19 57 Fitted with an

3362) 2) add FINISH (e.g. 3362PC) 3) add CYLINDER TYPE (e.g. 3362PC/UK or 3362PC/US).

3362 (round edge design) 19 57 12 13 50 3377 (square edge

12 Cylinder Pulls Four modern contemporary Cylinder Pulls designed to complement Letter Plates, Centre Door Knobs, and Door Knockers found within this section - each offered machined to accept either the UK or US standard cylinders Fitted with an anti-rotation pin on the rear ) select PULL (e.g. 3362) 2) add FINISH (e.g. 3362PC) 3) add CYLINDER TYPE (e.g. 3362PC/UK or 3362PC/US). Please note - cylinder not supplied (round edge design) (square edge design) D d code Cylinder Type D (d) UK UK standard US US standard DF5:120

13 Cylinder Covers Four designs of Cylinder Cover - beaded oval, plain oval, round and square - each offered machined to accept either the UK or US standard mortice cylinders & supplied with finish matched no.6 x 19mm wood screw for anti-rotation & fitted with an anti-rotation pin on the rear ) select COVER (e.g. 4057) 2) add FINISH (e.g. 4057PC) 3) add CYLINDER TYPE (e.g. 4057PC/UK or 4057PC/US). Please note - cylinder not supplied D code Cylinder Type D (d) UK UK standard US US standard d DF5:130

14 DF5:140

Auxiliary Deadbolt Turns - 54mm & 64mm Ø Rosettes A US specification Auxiliary Deadbolt Turn available in

This Round Plate & Thumb Turn combination is offered with twelve Round Plate designs and over twenty

Please contact us should you be unsure how a certain combination might look and we will be pleased to

approx actual size A D 6 A B D (diameter) Ø 54 Ø 64 Application Undrilled Doors Pre-Bored Doors See Allart

images (A size shown) 8500 8501 8502 8503 Supplied with finished matched M3 x 10mm machine screws and a

8504 8505 8506 8507 1) select ROSETTE DESIGN (e.g. 8503) 2) add SIZE (e.g. 8503B) 3) add TURN CODE (e.g. 8503B/T61) 4) add FINISH (e.

8508 8509 8510 8511 B size (64mm Ø) Pre-Bored Door set-up illustrated Cylinder Collar rear view (64mm Ø x

15 Auxiliary Deadbolt Turns - 54mm & 64mm Ø Rosettes A US specification Auxiliary Deadbolt Turn available in two diameters to cater for either undrilled or pre-bored doors. This Round Plate & Thumb Turn combination is offered with twelve Round Plate designs and over twenty different Thumb Turns. Please contact us should you be unsure how a certain combination might look and we will be pleased to provide you with an image for your perusal. approx actual size A D 6 A B D (diameter) Ø 54 Ø 64 Application Undrilled Doors Pre-Bored Doors See Allart Select section, page ST7:130/140 for Turn options 8503 size A Rosette with T51 Turn computer generated images (A size shown) Supplied with finished matched M3 x 10mm machine screws and a Cylinder Fixing Plate (Rim Cylinder and fixing bolts not supplied) ) select ROSETTE DESIGN (e.g. 8503) 2) add SIZE (e.g. 8503B) 3) add TURN CODE (e.g. 8503B/T61) 4) add FINISH (e.g. 8503B/T61/PC) B size (64mm Ø) Pre-Bored Door set-up illustrated Cylinder Collar rear view (64mm Ø x 15mm thick shown) see page DF5:150 rear view showing Turn machined to accept Rim Cylinder tailpiece Rim Cylinder (not supplied) Cylinder Fixing Plate (2 1 /8 bore) A size (54mm Ø ) Cylinder Fixing Plate for 1 5 /8 Ø bore - supplied with A size Rosettes for undrilled door application Mortise Deadbolt (not supplied) Rim Cylinder fixing bolts (not supplied) Turn Rosette (64mm Ø shown) finished matched M3 x 10mm machine screws DF5:150

Auxiliary Deadbolt Collars - 54 & 64mm Ø Rosettes A US specification Auxiliary Deadbolt Collar available in two

with an optional Extension Collar to cater for 34mm thick doors.

generated images (A size shown) 8540 8541 8542 8543 Collars: 1) select COLLAR DESIGN (e.g. 8543) 2) add SIZE (e.g. 8543B) 3) add FINISH (e.

8544 8545 8546 8547 8000 Extension Collars: 1) select SIZE (e.g.

8000B/PC) A B 8548 8549 8550 8551 D (diameter) Ø 54 Ø 64 Application Undrilled Doors Pre-Bored Doors Rim Cylinder

16 Auxiliary Deadbolt Collars - 54 & 64mm Ø Rosettes A US specification Auxiliary Deadbolt Collar available in two diameters to cater for either undrilled or pre-bored doors; both designed to work with 44mm & 57mm thick doors, with an optional Extension Collar to cater for 34mm thick doors. The Cylinder Collars are offered in twelve designs to match up with the Deadbolt Thumb Turns to be found on page DF5:150. optional Extension Collar (code 8000) approx actual size A 8543 shown with optional 6mm Extension Collar computer generated images (A size shown) Collars: 1) select COLLAR DESIGN (e.g. 8543) 2) add SIZE (e.g. 8543B) 3) add FINISH (e.g. 8543B/PC) For use with Baldwin Cylinders add /USB to code (e.g. 8531B/PC/USB) Extension Collars: 1) select SIZE (e.g. 8000B) 2) add FINISH (e.g. 8000B/PC) A B D (diameter) Ø 54 Ø 64 Application Undrilled Doors Pre-Bored Doors Rim Cylinder (not supplied) Rim Cylinder (not supplied) D STANDARD MACHINING (designed to work with Baton rim cylinders or equivalent) machined to locate into 2 1 /8 bore machined to locate into 1 5 /8 bore 6 64mm Ø Cylinder Collar (rear view) 54mm Ø Cylinder Collar (rear view) D USB MACHINING OPTION (for Baldwin rim cylinders) 64mm Ø optional Extension Collar (code 8000B) 54mm Ø optional Extension Collar (code 8000A) DF5:160

Auxiliary Deadbolt Turns - 54 & 64mm Square Plates A US specification Auxiliary Deadbolt Turn available in two sizes to cater for either

This Square Plate & Thumb Turn combination is offered with nine Square Plate designs and over twenty different Thumb Turns.

Application Undrilled Doors Pre-Bored Doors See Allart Select section, page ST7:130/140 for Turn options shown with T56 turn 8520 shown with

fixing bolts not supplied). shown with T61 turn shown with T52 turn 8523 8524 8525 shown with T54 turn 1) select PLATE DESIGN (e.g. 8522) 2) add SIZE (e.

(square edge design) 8527 (round edge design) 8528 A size (54mm Ø) Undrilled Door set-up illustrated Cylinder Collar rear view (64mm x 15mm

17 Auxiliary Deadbolt Turns - 54 & 64mm Square Plates A US specification Auxiliary Deadbolt Turn available in two sizes to cater for either undrilled or pre-bored doors. This Square Plate & Thumb Turn combination is offered with nine Square Plate designs and over twenty different Thumb Turns. Please contact us should you be unsure how a certain combination might look and we will be pleased to provide you with an image for your perusal size B Plate shown with T61 Turn L x W computer generated images (size A shown) 6 A B L x W 54 x x only 72 x x 64 Application Undrilled Doors Pre-Bored Doors See Allart Select section, page ST7:130/140 for Turn options shown with T56 turn 8520 shown with T67 turn 8521 shown with T69 turn 8522 Supplied with finished matched M3 x 10mm machine screws and a Cylinder Fixing Plate (Rim Cylinder and fixing bolts not supplied). shown with T61 turn shown with T52 turn shown with T54 turn 1) select PLATE DESIGN (e.g. 8522) 2) add SIZE (e.g. 8522B) 3) add TURN CODE (e.g. 8522B/T61) shown with T56 turn shown with T55 turn shown with T53 turn 4) add FINISH (e.g. 8522B/T61/PC) 8526 (square edge design) 8527 (round edge design) 8528 A size (54mm Ø) Undrilled Door set-up illustrated Cylinder Collar rear view (64mm x 15mm thick shown) see page DF5:150 rear view showing Turn machined to accept Rim Cylinder tailpiece Rim Cylinder (not supplied) Cylinder Fixing Plate (1 5 /8 bore) Cylinder Fixing Plate for B size (64mm Ø ) 2 1 /8 Ø bore - supplied with B size Plates for pre-bore door application Mortise Deadbolt (not supplied) Rim Cylinder fixing bolts (not supplied) Turn Plate (54mm shown) finished matched M3 x 10mm machine screws DF5:170

Auxiliary Deadbolt Collars - 54 & 64mm Square Plates A US specification Auxiliary Deadbolt Collar

size shown 15mm thick) 8560 8561 8562 1) select PLATE DESIGN (e.g. 8563) 2) add SIZE (e.g. 8563B) 3) add THICKNESS (e.

8563B15MM/PC/USB) 8563 8564 8565 A B L x W 54 x 54 64 x 64 Door Thickness 8560 only 72 x 54 82 x 64 T

design) Rim Cylinder (not supplied) 8567 (round edge design) 8568 T 35 32 STANDARD MACHINING (designed to

18 Auxiliary Deadbolt Collars - 54 & 64mm Square Plates A US specification Auxiliary Deadbolt Collar available in two sizes to cater for either undrilled or pre-bored doors; and in two thicknesses to cater for doors between 34mm & 57mm thick. The Cylinder Collars are offered in nine designs to match up with the Deadbolt Thumb Turns to be found on page DF5: mm thick 21mm thick 8564 size A shown in both 15mm & 21mm thickness options computer generated images (A size shown 15mm thick) ) select PLATE DESIGN (e.g. 8563) 2) add SIZE (e.g. 8563B) 3) add THICKNESS (e.g. 8563B15MM) 4) add FINISH (e.g. 8563B15MM/PC) For use with Baldwin Cylinders add /USB to code (e.g. 8563B15MM/PC/USB) A B L x W 54 x x 64 Door Thickness 8560 only 72 x x 64 T (thickness & 57 options) Application Undrilled Doors Pre-Bored Doors 8566 (square edge design) Rim Cylinder (not supplied) 8567 (round edge design) 8568 T STANDARD MACHINING (designed to work with Baton rim cylinders or equivalent) machined to locate into 1 5 /8 bore machined to locate into 2 1 /8 bore L x W T USB MACHINING OPTION (for Baldwin rim cylinders) 54mm Cylinder Collar 15mm thick (rear view) 64mm Cylinder Collar 15mm thick (rear view) DF5:180

Diamond orientated, USA specification, Auxiliary Deadbolt Turns & Collars - both available in two sizes to cater for either undrilled or pre-bored doors.

Please contact us should you be unsure how a certain combination might look and we will be pleased to provide you with an image for your perusal.

64 Application Undrilled Doors Pre-Bored Doors S See Allart Select section, page ST7:130/140 for Turn options shown with T69 turn shown with T61 turn shown with

Deadbolt Turns: 1) select PLATE DESIGN (e.g. 8529) 2) add SIZE (e.g. 8529B) 3) add TURN CODE (e.g. 8529B/T61) 4) add FINISH (e.g. 8529B/T61/PC) Cylinder Collars: 1) select COLLAR DESIGN (e.

8561B15MM/PC/USB) 8530 computer generated image 8561 size A shown 15mm thick 8531 S 8532 A B Door Thickness S (square) 54 64 T(thickness options) Application T

19 Diamond orientated, USA specification, Auxiliary Deadbolt Turns & Collars - both available in two sizes to cater for either undrilled or pre-bored doors. The Cylinder Collar is also offered in two thicknesses to cater for doors between 34mm & 57mm thick. Please contact us should you be unsure how a certain combination might look and we will be pleased to provide you with an image for your perusal. Auxiliary Deadbolt Turns & Collars 54 & 64mm Diamond Plates 8529 size A shown with T67 turn computer generated images (A size shown) 6 A B S (square) 54 x x 64 Application Undrilled Doors Pre-Bored Doors S See Allart Select section, page ST7:130/140 for Turn options shown with T69 turn shown with T61 turn shown with T52 turn Deadbolt Turns supplied with finished matched M3 x 10mm machine screws and a Cylinder Fixing Plate (Rim Cylinder and fixing bolts not supplied). Deadbolt Turns: 1) select PLATE DESIGN (e.g. 8529) 2) add SIZE (e.g. 8529B) 3) add TURN CODE (e.g. 8529B/T61) 4) add FINISH (e.g. 8529B/T61/PC) Cylinder Collars: 1) select COLLAR DESIGN (e.g. 8561) 2) add SIZE (e.g. 8561B) 3) add THICKNESS (e.g. 8561B15MM) 4) add FINISH (e.g. 8561B15MM/PC) For use with Baldwin Cylinders add /USB to code (e.g. 8561B15MM/PC/USB) 8530 computer generated image 8561 size A shown 15mm thick 8531 S 8532 A B Door Thickness S (square) T(thickness options) Application T computer generated images (A size shown 15mm thick) T 32 STANDARD MACHINING (designed to work with Baton rim cylinders or equivalent) & Undrilled Doors T USB MACHINING OPTION Pre-Bored Doors DF5:190

20 DF5:200

21 USA Exterior Door Sets Available in Allart Select sections ST4 & ST5 DF5:210

22 Multipoint Door Sets Available in Allart Select sections ST4 & ST5 and Door Furniture section DF1. DF5:220

Thumb Turns - Concealed Fix Square Plates

Thumb Turns - Concealed Fix Square Plates humb urns - Concealed Fix Square Plates A Concealed Fix Square Plate & humb urn combination with mm spindle fitted, offered with nine Square Plate designs - each available in up to five sizes - and over