RIM LOCKS STANDARDS & SPECIFICATIONS
|
|
|
- Gervais Daniels
- 5 years ago
- Views:
Transcription
1 RIM LOCKS STANDARDS & SPECIFICATIONS Pride in our American Heritage and renewed interest in its early history has greatly influenced U.S. architecture. With careful research and design, Baldwin has authentically reproduced a piece of that heritage colonial rim locks. > Constructed with solid forged brass parts for exceptional durability and smooth operation > Trim designs secured to a broached spindle with an epoxy (resin) coated set screw prohibits screw from loosening > Interior rim locks use bit keys. Bit keys may be ordered fixed permanently into the lock by ordering as.rbit or.lbit configurations. Rim lock mechanism Handing of Rim Lock Plates NOTE: Hand of door is always determined from outside LEFT HAND CONDITION (SINGLE DOOR) RIGHT HAND CONDITION (SINGLE DOOR) 201
2 RIM LOCKS PASSAGE, PRIVACY & ENTRANCE Full Dummy Rim Locks Hollow rim lock case (without any working mechanism) Passage Rim Locks (.RBIT,.LBIT) Privacy Rim Locks Dead bolt by bit key either side used w/ privacy function (.RBIT,.LBIT) 0406 Cover Plate 5753 Emergency key s/b stored in readily accessible place Entrance Rim Locks Dead bolt by key outside and slide bolt inside 6757 Cylinder Cover Plate* * Only in case of Full Dummy prepared as a strike for all function rim locks , 050 Item # Description Function Wt. Backset 260, xxx.R (.L,.RR,.LR) Small Vertical Rim Lock Passage $ xxx.RFD (.LFD) Small Vertical Rim Lock Full Dummy xxx.R (.L,.RR,.LR) Small Vertical Rim Lock Privacy xxx.RFD (.LFD) Small Vertical Rim Lock Full Dummy xxx.R (.L,.RR,.LR)* Small Vertical Rim Lock Entrance * 858* 5604.xxx.RFD (.LFD)* Small Vertical Rim Lock Entrance * 428* 5630.xxx.R (.L,.RR,.LR) 7 Horizontal Rim Lock Passage xxx.RFD (.LFD) 7 Horizontal Rim Lock Full Dummy xxx.R (.L,.RR,.LR) 7 Horizontal Rim Lock Privacy xxx.R (.L,.RR,.LR) 7 Horizontal Rim Lock Entrance xxx.RFD (.LFD) 7 Horizontal Rim Lock Entrance xxx.R (.L,.RR,.LR) Small Horizontal Rim Lock Passage xxx.RFD (.LFD) Small Horizontal Rim Lock Full Dummy xxx.R (.L,.RR,.LR) Small Horizontal Rim Lock Privacy xxx.RFD (.LFD) Small Vertical Rim Lock Full Dummy xxx.R (.L,.RR,.LR) Small Horizontal Rim Lock Entrance xxx.RFD (.LFD) Small Horizontal Rim Lock Entrance RIM LOCKS ARE NOT REVERSIBLE SPECIFY HAND OF DOORS Bit Key can be permanently fitted at an extra charge of $10 (add BIT to end of suffix: eg xxx.R becomes 5600.xxx.RBIT) *5604.xxx Fixed bit key NOT available Outside Trim 6755.xxx Cylinder Cover (Entrance only) 5030.xxx Knob 5002.xxx Rose Inside Trim Inside Trim Inside Trim Right Hand Shown 5600, 5602, 5604.xxx Small Vertical Rim Lock CASE: KEEPER: BACKSET: 2.75 Upright design well suited for narrow stile doors 5604.xxx Bit key NOT available. 5630, 5632, 5634.xxx 7 Horizontal Rim Lock CASE: KEEPER: Right Hand Shown Left Hand Shown 5701, 5702, 5704.xxx Small Horizontal Rim Lock CASE: KEEPER: BACKSET: 3.5 TO BIT KEY: 2.375
3 RIM LOCKS ENTRANCE, SPECIAL FUNCTION Inside Trim , 050 Item # Description Function Wt. Backset 260, xxx.R (.L,.RR,.LR) Bevelled Rim Lock Entrance $1,127 1, xxx.RFD (.LFD) Bevelled Rim Lock Entrance xxx.R (.L,.RR,.LR) Hollow Metal Doors Rim Lock Entrance ,127 1, xxx.RFD (.LFD) Hollow Metal Doors Rim Lock Entrance xxx.R (.L,.RR,.LR) Horizontal Cylinder Lock Entrance ,127 1, xxx.RFD (.LFD) Horizontal Cylinder Lock Entrance xxx.R (.L,.RR,.LR) Entrance Door Rim Lock Entrance ,127 1, xxx.RFD (.LFD) Entrance Door Rim Lock Entrance xxx Entrance Door Rim Lock Outside only x xxx.R (.L) Entrance Door Rim Lock Inside only x RIM LOCKS ARE NOT REVERSIBLE SPECIFY HAND OF DOORS Bit Key can be permanently fitted at an extra charge of $10 (add BIT to end of suffix: eg xxx.R becomes 5600.xxx.RBIT) 5636.xxx Bevelled Rim Lock CASE: KEEPER: TO BIT KEY: 4 FRONT TO CYLINDER CENTERLINE: 3 Inside Trim OUTSIDE 5644.xxx Horizontal Cylinder Lock CASE: KEEPER: BACKSET: 8 TO BIT KEY: 6 FRONT TO CYLINDER CENTERLINE: 5 INSIDE 5639.xxx Hollow Metal Door Rim Lock CASE: KEEPER: LOCK PLATE: TO BIT KEY: 4 FRONT TO CYLINDER CENTERLINE: 3 NOTE: For 1.75 thick doors only Specially fabricated lock plate for metal clad doors 0579 Filler Plate 5629 Lock Plate 5720.xxx Entrance Door Rim Lock CASE: KEEPER: BACKSET: 3.5 FRONT TO CYLINDER CENTERLINE: 2.75 NOTE: For thick doors only Dead bolt by key outside and slide bolt inside Unusual combination of classic colonial Pitcher Handle sectional trim outside with Early American rim lock inside. Thumb piece operates latch and can be locked by turning cylinder key from outside or sliding dead bolt from inside Outside Trim Pitcher Handle 5723 Inside Trim Rim Lock 5030 Knob half pair 203
4 RIM LOCKS TRIM 038, 040, 050 Item # Description Fits 260, xxx Keeper (Standard Strike) 5600, 5602, xxx Keeper (Standard Strike) 5630, 5632, 5634, xxx Keeper (Standard Strike) 5644 $ xxx Keeper (Standard Strike) 5701, 5702, 5704, xxx Reverse Bevel Keeper (Strike) 5600, 5602, xxx Reverse Bevel Keeper (Strike) 5630, 5632, 5634, xxx Reverse Bevel Keeper (Strike) xxx Reverse Bevel Keeper (Strike) 5701, 5702, 5704, 5720 $57 62 Rim Lock Keepers (Strikes) Fits Rim Locks x.875 x , 5602, x.875 x , 5632, 5634, x.875 x x.875 x , 5702, 5704, xxx Scuff Plate 5600, 5602, xxx Scuff Plate 5630, 5632, 5634, xxx Scuff Plate xxx Scuff Plate 5701, 5702, 5704, xxx Exterior Lock Plate xxx Exterior Lock Plate 5634, xxx Exterior Lock Plate xxx Exterior Lock Plate 5704 $57 62 $ Reverse Bevel Keepers (Strikes) Fits Rim Locks , 5602, , 5632, 5634, , 5702, 5704, 5720 Knob trim NOT included Included with Cylinder-function Rim Lock xxx Exterior only Lock Plate Scuff Plates Fits Rim Locks Recommended on reverse bevel doors. Prevents damage to doors and latch bolts. Provides smoother lock operation , 5602, , 5632, 5634, , 5702, 5704, 5720 Item # Door handing Door Plate Prep Size Fits Rim Lock 5608.xxx.RSKC (.LSKC)* R or L S (Single) KC xxx.RSKC (.LSKC)** R or L S KC , xxx.RSKC (.LSKC) R or L S KC xxx.RSKC (.LSKC)* R or L S KC *Does not include and cannot accommodate 6755 Swing Cover **Beveled trim for 5626 lock plate is not available & 5629 PLATES: is secured to plate NOTE: Rose and Cylinder trim furnished with cylinder function rim locks not used w/ Lock Plate THICKNESS:.093
5 RIM LOCKS ACCESSORIES 0406.xxx Colonial Emergency Release Trim & Key SIZE: (59 17mm). 030, 038, 040, 050 Item # Description 260, xxx Colonial Emergency Release Trim & Key $ xxx Emergency Release Key xxx Key Plate xxx Bit Key xxx Solid Brass Spacer xxx Cylindar Lock Cover Plate xxx.001 1/16 Blocking Ring 6755 only (040 finish only) xxx.002 3/32 Blocking Ring 6755 only (040 finish only) xxx.003 1/8 Blocking Ring 6755 only (040 finish only) xxx Wrought Cylinder Collar for Rim Locks xxx Emergency Release Key SIZE: 4 (102mm) long. Designed for use with Privacy Rim and Mortise Lock 6755.xxx Cylinder Cover Plate SIZE: (60 41mm) FEATURES: For use with all standard rim lock cylinders (except 5704 Rim Lock) 6755.xxx Blocking Rings For only 5754.xxx Key Plate SIZE: (51 29mm).Key Plate 8314.xxx Wrought Cylinder Collar for Rim Locks 5755.xxx Bit Key SIZE: 4 (102mm) long. FEATURES: Fits all Baldwin rim locks. Can be permanently fitted with locks to prevent unauthorized removal xxx Solid Brass Spacer Designed for use with knob trim during installation on rim lock case. Furnished standard with all rim lock sets. 205
STAinLeSS STeeL p re-configured SeTS rosettes stainless steel item # description wt. 320, s, 5032s, 5139s, 5033s, 5133s 5034s 5032s 5139s
ROSETTES Knobs STAINLESS STEEL Rosettes STAINLESS STEEL 5034S, 5032S, 5139S, 5033S, 5133S 5034S 1.75 5032S 5139S 5033S 5133S 2.125 2.625 320, 324 5034S.xxx 1.75 Passage pair 5034S.xxx.FD 1.75 Dummy pair.3
20 Series. Exit Device
20 Series Exit Device Copyright 2003, 2007, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Table Of Contents Page Features, Applications and UL
Table Of Contents. 30 Series Exit Device. On The Cover
30 Series Exit Device Copyright 1999, 2001, 2004, 2008, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table Of Contents Page Features, Applications and UL Fire
Table of Contents 20 Series Exit Device
20 Series Exit Device Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Features, Applications and UL Fire Door Ratings...
EVOLVED SMART LOCKSETS
EVOLVED SMART Smart Never Looked So Beautiful EXPERIENCE THE BOLD EVOLUTION OF LUXURY HARDWARE WITH BALDWIN EVOLVED, THE NEXT GENERATION OF SMART HANDLESETS AND DEADBOLTS BLENDING EXQUISITE ARCHITECTURAL
CK4400 Series. Standard Duty Cylindrical Knob Locksets
Series Standard Duty Cylindrical Knob Locksets Applications Applications An outstanding combination of value and performance. Ideal for quality residential and light commercial buildings, such as: Fine
CL3200 Series. Security Bolt Lever Lockset
Series Security Bolt Lever Lockset Applications Applications A heavy-duty, high-use lockset that combines the convenience of a barrierfree lever lockset with the security of a 1" (25mm) deadbolt in a single
PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Exit Devices Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy
Table of Contents 30 Series Exit Device
30 Series Exit Device Table of Contents Features, Applications and UL Fire Door Ratings... 1 3727/ NB3727 Vertical Rod Type Exit Device... 2 3828 Rim Type Exit Device...3 30 Series Trims....4 Alternate
- Available in 7 BHMA finishes - 605, 606, 613, 625, 626, 629, 630
- Available in 7 BHMA finishes - 605, 606, 613, 625, 626, 629, 630 Free turning lever or knob in the locked position Vandal resistant clutching mechanism in outside trim assembly Ideally suited for hospitals,
SX/SV Series. Commercial Locks
SX/SV Series Commercial Locks SX SERIES COMMERCIAL GRADE 1 CYLINDRICAL Lockset will be SX Series from PDQ Industries, Inc., Leola, Pennsylvania. Lock will conform to ANSI A156.2-2003 Grade 1, surpassing
Simplex. Cylindrical Knob Series. Grade 1 Extra Heavy Duty Cylindrical Knob
Cylindrical Knob Series Grade 1 Extra Heavy Duty Cylindrical Knob SPXCK100 F82 Entry/Office Lock Push Button locking. Pushing button in inside knob locks outside lever until unlocked with key or turning
Exit Devices Rainer Security Products Ltd
Exit Devices Rainer Security Products Ltd Unit B6, Rudford Industrial Estate, Ford, Arundel, West Sussex BN18 0BF +44 (0) 190 72211 rainersecurity.co.uk sales@rainersecurity.co.uk 2 S1150 & S1250 Series
4500/4600/4300 SERIES KEY IN LEVER LOCKSETS. ainsborough now offers a broad selection of key in lever lockset
4500/4600/4300 SERIES ainsborough now offers a broad selection of key in lever lockset G designs, from the 4500 and 4600 Series to the newly released 4300 Series range. The 4500 and 4600 Series key in
Product Catalog. S Series. S Series
Grade 2 Non-Handed Cylindrical Key-In-Knob Rim Devices Lock Product Catalog Catalog Falcon Lock Philosophy Quality locksets delivered on time is the Falcon Lock creed. Whether you re ordering Falcon Locks
X Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series
Lock type finish chart MA X Grade 1, heavy-duty cylindrical knob locks RU T When you need a tough, reliable lock that can also withstand the corrosive conditions of a marine environment you need a Falcon
PRE-CONFIGURED SETS KNOBS & LEVERS
PRE-CONFIGURED SETS KNOBS & 5015 Classic Knob w/ 5048 Rose KNOBS PRE-CONFIGURED SETS 00, 01, 102, 112, 150, 260 00, 055 5015.xxx.FD Full Dummy 1.9 $140 $170 5015.xxx.IDM Half Dummy 1.0 70 85 5015.xxx.PASS
Overhead Door Holders/Stops
Overhead Door Holders/Stops 08 71 00/ING BuyLine 7155 STEELCRAFT SINGLE ACTING DOORS, INTERIOR/EXTERIOR APPLICATIONS, REVERSIBLE, NON-HANDED 450 Series Surface-mounted holders and stops offer the widest
Design Guidelines and Standards Manual University of Cincinnati
SECTION 08710D - A. SPECIFICATIONS FORMAT 1. It is preferred that this section include all items of door hardware. Window hardware and operators should be specified in the window section. This approach
CONTENTS FIGURES GETTING STARTED 1 1 FUNCTIONS AND PARTS LISTS K Series Service Manual
CREDITS/COPYRIGHT 2001-2002 Best Lock Corporation dba Best Access Systems. All rights reserved. Printed in the United States of America. Information in this document is subject to change without notice
STANDARD SERIES COMMERCIAL DOOR REINFORCERS
COMMERCIAL DOOR REINFORCERS STANDARD SERIES COMMERCIAL DOOR REINFORCERS 1, 2, 3, 4 FOR STANDARD DOOR LOCKS 2 1 8" bore Overall Size Back Set Door Thickness 1-AB... Antique Brass... 4" x 9"... 2 3 8"...
CONTENTS GETTING STARTED 1 1 FUNCTIONS AND PARTS LISTS K Series Service Manual
CREDITS/COPYRIGHT Copyright 2000 2004 Stanley Security Solutions, Inc. and Stanley Logistics, Inc. All rights reserved. Printed in the United States of America. Information in this document is subject
Table of Contents. 11 Line Bored Lock. Specifications. Certification Compliance. On the Cover
Table of Contents Features, Benefits & Applications... 1 Windstorm Certifications... 2 STC Acoustic Door Systems... 3 Functions...........................................................................4-5
ED7000 Series. Narrow Stile Crossbar Exit Devices
Narrow Stile Crossbar Exit Devices Applications Narrow Stile Crossbar Exit Devices Table of Contents Applications... 2 Applications and Listings... 3 Features, Trims and Functions Rim Exit... 4 Mullions...
TRADITIONAL DOOR LOCK
TRADITIONAL DOOR LOCK The ERA Traditional Door Lock has been designed to replace most existing front door locks, providing added security to new exterior and interior doors. The lock is suitable for left
Simplex 900 Series - - SIMPLEX Finish
900 Series Example 9 0 2 0 0 0 0 2 6 D 4 1 9 4 1 Model Options Finish Build the model number with the desired options - - - - Packaging Base Model Description Base Price 902000026D41 Auxiliary Lock with
CONTENTS FIGURES GETTING STARTED 1 1 FUNCTIONS AND PARTS LISTS KC Series Service Manual
CREDITS/COPYRIGHT Copyright 2000 2004 Stanley Security Solutions, Inc. and Stanley Logistics, Inc. All rights reserved. Printed in the United States of America. Information in this document is subject
Olympian 100, 200, 300 Series
OLYMPIAN 100, 200, 300 SERIES : EXIT DEVICES Olympian 100, 200, 300 Series Exit Devices Strength by design. Simply PRECISION TABLE OF CONTENTS Exit Devices & Trims Rim Devices...4, 5 Surface Vertical Rod
MLR Series Institutional Life Safety Mortise Locksets Levers
MLR Series Institutional Life Safety Mortise Locksets Levers Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds alll operational and security tests of ANSI specifications
T H E F A L C O N D I F F E R E N C E
T H E F A L C O N D I F F E R E N C E S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you spec not only has to meet local building codes, but also your
Light/Medium-Duty Knob Locksets. CK4700 Series
Light/Medium-Duty Knob Locksets CK4700 Series Applications Quality The CK4700 series is a Grade 2 light/medium-duty knob lockset which provides an outstanding combination of value and performance. It is
FINISH INDEX STANDARD STOCK
SINCE 1964 FINISH INDEX STANDARD STOCK POLISHED BRASS, US3 n.1: an impressive or wonderful example of a particular quality OIL-RUBBED BRONZE, POLISHED BRASS, UN US3A* * Only available for No.955 knob with
Heavy-Duty Cylindrical Knob Locksets. CK4200 Series
Heavy-Duty Cylindrical Knob Locksets CK4200 Series Introduction Applications The highest quality materials and precision manufacturing ensure strength, durability and quiet operation. Ideal for demanding,
7 LINE CYLINDRICAL LEVER LOCK
7 LINE CYLINDRICAL LEVER LOCK Specifications Table of Contents Lever Designs, Features, Benefits & Applications........................... 1 Functions..........................................................
GRADE 2 HEAVY & STANDARD DUTY CYLINDRICAL LOCKS
GRADE 2 HEAVY & STANDARD DUTY CYLINDRICAL LOCKS Division 8 5 YEAR WARRANTY ANSI/BHMA 156.2 GRADE 2 SPECIFICATION UNISON HARDWARE, INC. www.inoxproducts.com Version: 2015.10 TABLE OF CONTENTS How to Order
W Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series
Lock type finish chart MA W Grade 2, medium-duty cylindrical lever and knob locks RU T Whether your application is government/military, retail, industrial or multi-family, there s a W lock that fits perfectly.
3200 Series Cylindrical Lock
3200 Series Cylindrical Lock 53mm 64mm RP01 Rebated part to suit cylindrical lock Mechanism Heavy gauge cold rolled steel, zinc plated and dichromated for rust resistance. Material Roses are stainless
OLYMPIAN 100, 200, 300 SERIES PRECISION HARDWARE
OLYMPIAN 100, 200, 300 SERIES PRECISION HARDWARE GENERAL INFORMATION TABLE OF CONTENTS EXIT DEVICES & TRIMS Page Rim Devices...4, 5 Surface Vertical Rod Devices...6, 7 Mortise Devices...8, 9 MULLIONS Fire
Arts & Craft Collection
Style 8921 5 3/4 X 1 OP = 1 13/16 IP = 1 1/4 Shown in Satin White Bronze (SW) Left Hand Exterior Passage Set 7.25mm on the Diamond 8921/77 + Finish Multi Point Set 8mm on the Square 8921/28 + Finish Right
E-Plex 5700 Series E-PLEX
PIN/PROX or Dual Credential Electronic Pushbutton Lock 3,000 Access Codes 30,000 Audit Events Access Schedules ANSI/BHMA Grade-1 Certified Features Access Control: No Wires: Locking Device Options: Number
APEX 2000 SERIES: TOUCHBAR EXIT DEVICES. Apex 2000 Series. Touchbar Exit Devices. Strength by design. Simply PRECISION
APEX 2000 SERIES: TOUCHBAR EXIT DEVICES Apex 2000 Series Touchbar Exit Devices Strength by design. Simply PRECISION TABLE OF CONTENTS Wide Stile Exit Devices & Trims Rim Devices...4, 5 Surface Vertical
Medeco 18 Series Cylindrical Lever Lock FEATURES & BENEFITS
Medeco 18 Series Cylindrical Lever Lock FEATURES & BENEFITS Compatible key-in-lever cylinders and interchangeable cores Built for reliability, accessibility for servicing, and durability Attack resistant
E-Plex 5700 Series E-PLEX
PIN/PROX or Dual Credential Electronic Pushbutton Lock 3,000 Access Codes 30,000 Audit Events Access Schedules ANSI/BHMA Grade-1 Certified Features Access Control: No Wires: Locking Device Options: Number
Functions. Multi-Point Trim. EAA Entry Set-Key above Entry function with American cylinder above the lever, 92mm center to center.
Multi-Point Trims Multi-Point Trim EAA EAA EAA Entry Set-Key above Entry function with American cylinder above the lever, 92mm center to center. PAA PAA PAA Patio Set-No keyway Patio function with the
D9300 ELECTRIC MAXI-MORTISE
Key: Mogul FOLGER ADAM ELECTRIC LOCKS Description Series D9300 locks are pin tumbler mortise locks with an electricallycontrolled knob-lockout function for swinging doors. Applications An extra heavy duty
GRADE 1 HEAVY DUTY CYLINDRICAL LOCKS
GRADE 1 HEAVY DUTY CYLINDRICAL LOCKS Division 8 10 YEAR WARRANTY ANSI/BHMA 156.2 GRADE 1 SPECIFICATION UNISON HARDWARE, INC. www.inoxproducts.com Version: 2015.10 TABLE OF CONTENTS How to order Page 1
Standard Lever Designs
Standard Lever Designs 3-7/8" 96mm 4-3/4" 121 mm 01 64mm 02 2-15/16" 75 mm 1/2" 13mm 4-5/8" 117mm 4-5/8" 117mm 06 2-3/4" 73mm 07 3-5/8" 92mm 4-7/8" 124 mm 4-7/8" 124 mm 18 2-5/8" 67 mm Accent (ACC) Material:
W Series Cylindrical Lever. W Series cylindrical lever lock
38 W Series cylindrical lever lock Arrow W Series Grade 1 heavy duty levers offer an economically pleasing solution for ADA compliance. They re offered in a complete range of functions and finishes and
EXIT DEVICES Apex 2000 Series
PRECISION HARDWARE EXIT DEVICES Apex 2000 Series GENERAL INFORMATION TABLE OF CONTENTS WIDE STILE EXIT DEVICES & TRIMS Page Rim Devices...4, 5 Surface Vertical Rod Devices...6, 7 Mortise Devices...8, 9
GT Series. Spirit Locks
GT Series Spirit Locks GT SERIES SPIRIT EXTRA HEAVY DUTY GRADE 1 SERIES Lockset will be GT Series SPIRIT from PDQ Industries, Inc. Leola, Pennsylvania, assembled in the USA with U.S. and foreign materials
ARCHITECTURAL DOOR HARDWARE EXIT DEVICE CATALOG
ARCHITECTURAL DOOR HARDWARE EXIT DEVICE CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index EXIT DEVICES 5000 Series (Grade 2)...1-10
Series SS19 Institutional Life Safety Mortise Locksets - Levers
Series SS19 Institutional Life Safety Mortise Locksets - Levers Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications
4000 Series Exit Devices Premier Product
4 4000 Series Exit Devices Premier Product Certification & Compliance: u ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.
Information provided by H. A. Reed Locksmiths Locksets 530 Series Key in Knob Locksets 2.61 Mechanical Locking Solutions
530 Series Key in Knob Locksets The 530 series is designed as a non-handed, easy-to-install lockset. This high quality range is suitable for residential and commercial applications including office partitioning.
Entry. Entry. Entry. Entry
Functions x 9800/9M800 AC2 Exit Device Outside Inside Series/Function Type Function Description ED5200(A) & ED5200S(A) *9833 Without Cylinder Outside lever locked (freewheeling) except when in passage
Series 5SS19 Institutional Life Safety Mortise Locksets - Levers
Series 5SS19 Institutional Life Safety Mortise Locksets - Levers Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI
Underwriters Laboratories : 9K series Listed by Underwriters Laboratories for use on 3 Hr, A label for single or double swinging doors.
9K Series Locks ADA Americans With Disabilities Act: 9K series The design and operation of the BEST cylindrical lock meets the intent of the standard for ANSI A117.1 section 404.2.6 Builders Hardware Manufacturers
Cedar Falls Collection
Cedar Falls Collection Berebi Bronze Hardware Cedar Falls Collection Style 9210 L = 5 OP = 1 13/16 Left Hand Exterior Passage Set 7.25mm on the Diamond 9210/77 + Finish Multi Point Set 8mm on the Square
Supplied standard with D and T strikes and spacer rings.
Legge products have an outstanding reputation for quality, performance and functionality and the G2 cylindrical lockset is no exception. The G2 lockset offers Grade 2 ANSI Certification which makes it
S200-SERIES. Interconnected Entrance Locks
Interconnected Entrance Locks Application Multi-family dwellings, hotel/motel, office and light duty commercial use. Performance Features Simultaneous retraction of deadbolt and latch for single-motion
Yale Nomenclature midwestwholesale.com. Yale FL
Nomenclature 88 47 FL Basic Lock Series 8800 Front... 8 1¼ Latch... ¾ throw, stainless steel, anti-friction Deadbolt... 1 throw, stainless steel Lock Function 01... Passage Latch 02... Privacy Lock 05...
Yale Nomenclature midwestwholesale.com. Yale FL
Nomenclature 88 47 FL Basic Lock Series 8800 Front... 8 11/4 Latch... 3/4 throw, stainless steel, anti-friction Deadbolt... 1 throw, stainless steel Lock Function 01... Passage Latch 02... Privacy Lock
7KC SERIES: MEDIUM DUTY CYLINDRICAL LOCKS LEVERS. 7KC Series. Medium Duty Cylindrical Locks Levers. BEST: Setting the Standard for Security
7KC SERIES: MEDIUM DUTY CYLINDRICAL LOCKS LEVERS 7KC Series Medium Duty Cylindrical Locks Levers BEST: Setting the Standard for Security TABLE OF CONTENTS Features...2 Specifications...2 How To Order...3
5000 & F5000 Rim Type Panic And Fire Exit Devices 5000V & F5000V Vertical Rod Panic And Fire Exit Devices ANSI A156.3, Grade 2
5000 & F5000 Rim Type Panic And Fire Exit Devices 5000V & F5000V Vertical Rod Panic And Fire Exit Devices ANSI A156.3, Grade 2 Features & Construction ANSI A156.3, Grade 2 heavy duty exit device in surface
PHILADELPHIA HARDWARE GROUP, INC.
PHILADELPHIA HARDWARE GROUP, INC. Classic Collection for Your Home Classic Collection for Your Home Whether you are a first time homeowner or you are planning to update your existing home, you will be
K Series. Grade 1 cylindrical lever locks
K Series Grade 1 cylindrical lever locks Falcon K Series 4 Overview 5 Features and specifications 6 Designs and finishes 7 Functions 8 Cylinders 9 Competitive keyways 10 Options and accessories 11 Competitive
residential door hardware
residential door hardware 800-334-5625 www.hardwaresuppliers.com Special Order Suppliers of Door Hardware ph 800-334-5625 fax 800-334-5635 www.hardwaresuppliers.com sales@hardwaresuppliers.com (To email
Retrofit Locks and Trim. Product Catalog
Retrofit Locks and Trim Product Catalog Index General Information Falcon Lock Philosophy Quality locksets delivered on time is the Falcon Lock creed. Whether you re ordering Falcon Locks for a retrofit
Key in Lever and Key in Knob Locksets. Locksets Key in Knob and Key in Lever
Key in Lever and Key in Knob Locksets Locksets Key in Knob and Key in Lever Key in Knob and Key in Lever Locksets Overview Lockwood offers a range of Key in Knob and Key in Lever locksets for all architectural,
Standard-Duty Key-In-Lever Locksets. CL3900 Series
45037 CR CL3900 8/23/01 4:16 PM Page 1 Standard-Duty Key-In-Lever Locksets CL3900 Series Applications Applications An economical, Grade 2 standard duty lever lockset which provides an outstanding combination
M-Series Service Manual
M-Series Service Manual Table of Contents Introduction... 1-2 Functions... 3-5 Replacement Parts for Early LM Series Lever Trim... 6 Trim Assemblies... 7-11 Falcon LM Series Mortise Trim... 7 Falcon L-900
ED5470 Panic-Listed Surface Vertical Rod Exit Device ED5470B 1-1/2 Hour Fire-Listed Surface Vertical Rod Exit Device
Surface Vertical Rod Features ED5470 Panic-Listed Surface Vertical Rod Exit Device ED5470B 1-1/2 Hour Fire-Listed Surface Vertical Rod Exit Device Features Handing Device is handed but easily field reversible.
A revolutionary new lock. Lever Lock
A revolutionary new lock. Lever Lock Table of Contents Specifications.................................................. Features and Benefits........................................ 1-2 Lever and Rose
Smart access means Dorma and Kaba Joining Forces
Smart access means Dorma and Kaba Joining Forces Access Solutions Segments Master Key Systems Door Hardware Optimal security with flexible allocation of access rights for the best possible control, low
Small Format Interchangeable Core (SFIC) Cylinders
Small Format Interchangeable Core (SFIC) Cylinders The L-Series lockset can be ordered to accept small format interchangeable cores (SFIC) compatible with manufacturers such as Falcon, Arrow and Best;
RELIANT 5000 SERIES: EXIT DEVICES. Reliant 5000 Series. Exit Devices. Strength by design. Simply PRECISION
RELIANT 5000 SERIES: EXIT DEVICES Reliant 5000 Series Exit Devices Strength by design. Simply PRECISION TABLE OF CONTENTS Exit Devices & Trims Rim Devices...4, 5 Surface Vertical Rod Devices...6, 7 Mullions
Underwriters Laboratories : 9K series Listed by Underwriters Laboratories for use on 3 Hr, A label for single or double swinging doors.
9K Series Locks ADA Americans With Disabilities Act: 9K series The design and operation of the BEST cylindrical lock meets the intent of the standard for ANSI A117.1 section 404.2.6 Builders Hardware Manufacturers
1010A DEADLOCK DOOR MOUNTED FOR SMALL SWINGING DOORS APPLICATION: FUNCTION: CRAFTMASTER HARDWARE CO., INC
DOOR MOUNTED FOR SMALL Maximum security. 1010A-1: KEYED ONE SIDE 1010A-2: KEYED BOTH SIDES For small swinging doors on access panels, plumbing chases, control cabinets, etc. FUNCTION: Key activated locking
Commercial Grade Auxiliary Locks
-Series Commercial Grade Auxiliary Locks Commercial Grade Auxiliary Locks B600/700/800-Series are heavy duty commercial deadlocks with a wide variety of keying and security options. BC100 Series is ideal
An ASSA ABLOY Group brand Series. Flatbar Exit Devices
An ASSA ABLOY Group brand 1800 Series Flatbar Exit Devices introduction Yale 1800 series exit devices are the ideal choice for economy commercial applications where consistent quality, ease of use and
Multi-Point Lock Systems. Manufacturer & Wholesaler of Winly Products
ARCHITECTURAL, DESIGNER, BUILDER HARDWARE Multi-Point Lock Systems... 1 Gripsets... 4 Lever Handlesets... 12 Interior & Exterior Matching Sets... 14 Mortise Handlesets... 16 European Style Levers... 17
Non-handed, pre-assembled for left hand door installation easily changed in the field
PIN Access Electronic Pushbutton Lock 100 Access Codes Cylindrical Features Access Control: No Wires: Locking Device Options: Number of Codes: Handing: Programming: Key Override (Optional): Operation Modes:
Sliding Door Locks & Hardware. 5 a. Sliding & Pocket Door Locks European Sliding Narrow Style Lock Sliding Door Hardware Sliding Door Lever Lock
5 Sliding Door Locks & Hardware 5 a 5 b 5 c 5 d Sliding & Pocket Door Locks European Sliding Narrow Style Lock Sliding Door Hardware Sliding Door Lever Lock 2014 01 2 2014 01 5 Sliding Door Locks & Hardware
Falcon Monarch Dor-O-Matic. RU/RW Series. Extra Heavy Duty, Pre-assembled Unit Locks and Retrofit ADA Mortise Trim
Falcon Monarch Dor-O-Matic RU/RW Series Extra Heavy Duty, Pre-assembled Unit Locks and Retrofit ADA Mortise Trim T H E F A L C O N D I F F E R E N C E S A F E T Y, S E C U R I T Y A N D U N C O M P R O
CL3500 Series. Heavy-Duty Cylindrical Lever Lockset
Series Heavy-Duty Cylindrical Lever Lockset Applications Index Applications...2 Features... 3 Functions...4 Trim Designs...6 Options & Accessories...7 How to Order...9 Quick Codes...10 How to...11 Applications
FEATURES & SPECIFICATIONS. 100% internal parts quality inspection provides security, reliability and durability
For Doors... 1 ¼ Backset... 2 ¾ Lockcase... FEATURES & SPECIFICATIONS Heavy gauge zinc chromate steel Front... Heavy gauge steel x 1 ¼ x 3 / 32. Accommodates flat doors and doors beveled ⅛ in Armored Front...
DC3000 Series. Door Closers
Door Closers Table of Contents Applications 2 Features 3 & 4 Mountings 5 & 6 Door Closer Arms 7 & 8 Mounting Brackets 9 Brackets and Covers 10 Size and Handing 11 How to Order 12 Quick Codes 13 Helpful
2010 Product Line Catalog
2010 Product Line Catalog Electronic Access Control Locksets Now Part of 1 Electronic access control locksets With thousands of units in operation worldwide, IEI locksets are recognized for the highest
Table of Contents Auxiliary Locks
Copyright 2003, 2004, 2007-2017, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents SSL1 Spring Latch For Security SideLight Applications...1 8200 Series
WILLIAMSBURG BLACKSMITHS
WILLIAMSBURG BLACKSMITHS Since 1840 WROUGHT IRON HARDWARE, FIRE TOOLS, LIGHTING AND HOME ACCESSORIES MADE IN THE U.S.A. 26 WILLIAMS STREET WILLIAMSBURG, MA 01096 (413) 268-7341 www.williamsburgblacksmiths.com
F-Series Handleset Latches
F-Series Handleset Latches F-Series Handleset Latches Handleset Latches (Set of Spring+Deadbolt Latch with adjustable backsets) 12-321 12-322 1" x 2 1/4" $47.10 n/c (16-080 + 12-321) 16-080 F-Series Handleset
COMMERCIAL DOOR HARDWARE PRODUCT CATALOG HOME DEPOT EXCLUSIVE SPECIAL ORDER PROGRAM FOR MORE INFORMATION
HOME DEPOT EXCLUSIVE SPECIAL ORDER PROGRAM COMMERCIAL DOOR HARDWARE PRODUCT CATALOG FOR MORE INFORMATION Find Universal Hardware in QuoteCenter Downloadable version of this catalog can be found at UniversalHardware.com
ED3000 Series. Crossbar Exit Devices
Crossbar Exit Devices Introduction Table of Contents Applications and Listings... 3 Functions... 4 Rim Exit Features... 5 Surface Vertical Rod Exit Features... 7 Mortise Exit Features... 9 Trims and Functions...
Optional Latchbolts /8" (60 mm) Square or Round Corner, Dead Latch /4" (70 mm) Square or Round Corner, Dead Latch - Standard
Cylindrical Grade 1 Extra Heavy Duty Commercial, Industrial, Institutional 3400 Series Lifetime warranty No exposed mounting screws Non-handed Standard and interchangeable cores available Optional Latchbolts
Operation. Smooth. ML2000 Series Mortise Lock
Smooth Operation ML2000 Series Mortise Lock The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to withstand the most abusive environments. Constructed of heavy-gauge steel with unique, patented
Rim Trims and Functions
Rim Trims and Functions ED7000 Rim Exit Device ANSI Type Type Function Description ED7200 4 Exit Only 01 Exit only; no trim. (Accepts all trims listed below) For Dummy and functions, see Trim Designs below.
Locksets. Requirements. Approved Manufacturers. Schlage D Series Rho Trim No Substitution Cylinders Medeco No Substitution
Locksets Requirements -All Locksets To Be Grade 1 Series 4000 Cylindrical -All Locksets To Have ADA Approved Lever Trim -All Locksets to be Dull Chrome (626) Finish -All Lock And Cylinders To Be Keyed
Specifications & Certifications
Specifications & Certifications Certification Compliance ANSI/BHMA Certified to ANSI/BHMA A156.13 Series 1000 Operational Grade 1 and Security Grade 1 with all standard trims. ANSI/ASTM F476-84 Grade 40
Specifications & Certifications
Specifications & Certifications Certification Compliance ANSI/BHMA Certified to ANSI/BHMA A156.13 Series 1000 Operational Grade 1 and Security Grade 1 with all standard trims. ANSI/ASTM F476-84 Grade 40
Grade 2 Cylindrical Locksets DORMA CL700 CK700
Grade 2 Cylindrical Locksets DORMA CL700 CK700 Table of Contents CL700/CK700 Grade 2 Cylindrical Locksets Features...................................... 3 Technical Details and Specifications..................