Hot and Cold Plumbing Manifold Systems
|
|
- Karin Kelly
- 5 years ago
- Views:
Transcription
1 Hot and Cold Plumbing Manifold Systems
2 Hot and Cold Manifold Overview By using an Emmeti manifold system in a point to point plumbing configuration you can greatly reduce the number of joints in your system, speeding up installation time and vastly reducing the chances of a leak. A manifold system also allows you to reduce certain pipe sizes per outlet, which will save on material and installation cost (e.g. WC feed with 0mm and shower feed with mm). Point to Point Manifold Plumbing Point to point plumbing is a method of installation using a manifold to distribute hot and cold water to items of sanitaryware and appliances around the property (such as washing machines, sinks, baths, dishwashers, and so on). Each individual outlet is supplied using a continuous length of pipe from the manifold, with joints at the outlet and at the manifold only. This reduction of joints in the system reduces installation time and vastly decreases the potential for leaks, which can lead to costly repair claims and damage to reputation. The examples below show how the use of a manifold eliminates all concealed intermediate joints (that could potentially leak) against the conventional method of installation. The pipe distributed to each outlet can be tailored to suit individual requirements i.e. mm to shower and 0mm to basin and WC. The manifold shown also allows for isolation at each outlet in the event of any repair work or maintenance. Manifold Joint Point to Point Plumbing Traditional Branch Plumbing A joint in a water system is the most likely place for a leak to occur. We offer the ability to greatly reduce this potential risk by reducing the number of joints in the system. The table here shows the principles of point to point plumbing. There is a huge difference in the number of joints between traditional branch and point to point systems (up to 70%), saving installation time and vastly reducing the potential for a leak. The reduction in fittings along with the speed of installation can offset any additional costs incurred when purchasing the manifold and additional pipe. Point to point example Number of fittings (Tees & Elbows) Number of joints 0 Branch example 7 0 For more information please call us on or view our website at
3 Manifolds A range of WRAS approved brass manifolds for use with hot and cold point to point plumbing systems. Available with inividual outlet isolation in ¾, and ¼ sizes between and ways. Pipe and Accessories Manifolds Accessories Gerpex WRAS approved Multi-layer Composite Pipe for use in point to point systems. Available in rolls with diameters of, 0,, mm and in bars, 0,,, 0, 0,, 7mm. The pipe on rolls is also available pre-insulated with closed cell expanded polyethylene sheath, cross-link coating to protect against heat loss and freezing. Emmeti Monoblocco connectors are patented, WRAS and BBA approved single piece adaptors available to suit pipe sizes 0-0mm and pipe types (PB, PE-Xa, PE-RT, MLCP, & copper). Pipe preparation and cutting tools available for all sizes. A wide range of accessories are available to suit Emmeti hot and cold plumbing manifolds such as on and in wall metal cabinets, mounting brackets, and blanking plugs. For more information please call us on or view our website at
4 Manifolds TopSan manifold with isolating taps ¾ Manifold Distance between takeoffs : mm Manifold mm 0mm Distance between takeoffs : 0mm TopSan manifold assembly Description Ways Pcs/Pack Code Unit Price ¾ ¾ ¾ 080. ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ For Copper, MultiLayer, PEX, PP, PB pipe. Please order two rails, one rail for hot and one for cold supply. Separate blue and red outlet identification labels are shipped with each order. These labels are applied by the installer on site. For mm interaxial spacing a 7mm spanner is required, code: 0008 or 000. For WRAS approved MLCP (MultiLayer Composite Pipe), Emmeti Monoblocco connectors, plastic or metal mounting brackets, blanking plugs and ball valves please refer to the relevant pages within this section. Ball Valves A range of ¾ and Ball Valves are available. For the complete range please refer to system components or visit our website Monoblocco Connectors A range of Monoblocco connectors are available to suit pipe sizes 0mm - 0mm, and different pipe types PB, PE-X, PE-RT, MLCP and Copper. For the complete range, please refer to the relevant pages within this section or visit our website Manifold Code 0800 (way) to ( way) ¾ Code 0808 ( way) to ( way) Blanking Plug Code ¾ M with O-ring seal Code M with O-ring seal Aluminum Slider Rail Order two per manifold or one 00mm slider rail as this can be snapped into two 00mm lengths by hand. Code mm or Code mm. Brackets Code 000 ¾ Plastic Bracket Supports Code 000 Plastic Bracket Supports Sold in boxes of 0 pairs. Additional Bracket Options Single Metal Brackets (Sold in pairs) Code ¾ Code Double Metal Brackets (Sold in pairs) Code ¾ 00mm centres Code mm centres For more information please call us on or view our website at
5 Manifolds (continued) Multiplex sanitary manifold with isolating taps mm Distance between takeoffs : mm Bridging piece for Multiplex manifold Multiplex manifold assembly Description Ways Pcs/Pack Code Unit Price ¾ ¾ ¾ For copper, MultiLayer, PEX, PP, PB pipe. Please order two rails, one rail for hot and one for cold supply. Separate blue and red outlet identification labels are shipped with each order. These labels are applied by the installer on site. For mm interaxial spacing a 7mm spanner is required, code: 0008 or 000. For WRAS approved MLCP (MultiLayer Composite Pipe), Emmeti Monoblocco connectors, plastic or metal mounting brackets, blanking plugs and ball valves please refer to the relevant pages within this section. ¾ A bridging piece to allow extension of Multiplex manifolds. Note: Not suitable for Modular manifolds. Alternative is to use TopSan series. Ball Valves A range of ¾ and Ball Valves are available. For the complete range please refer to section system components or visit our website Monoblocco Connectors A range of Monoblocco connectors are available to suit pipe sizes 0mm - 0mm, and different pipe types PB, PE-X, PE-RT, MLCP and Copper. For the complete range, please refer to the relevant pages within this section or visit our website Manifold Code 0070 ( way) to ( way) ¾ Code (way) to ( way) Blanking Plug Code ¾ M with O-ring seal Code M with O-ring seal Plastic Brackets Code 000 ¾ or 000. Sold in boxes of 0 pairs. Aluminum Slider Rail Order two per manifold or one 00mm slider rail as this can be snapped into two 00mm lengths by hand. Code mm or Code mm. For more information please call us on or view our website at
6 Manifolds (continued) Topway SN ¾ distribution manifold mm Topway SN distribution manifold Distance between takeoffs : mm 0mm Distance between takeoffs : 0mm Description Ways Pcs/Pack Code Unit Price ¾ ¾ ¾ ¾ 09.8 ¾ ¾ ¾ ¾ ¾ ¾ ¾ A distribution only manifold in nickel plated brass. ¾ F connection at each end with x9 outlet connection. ½ F port for connection of a manual or automatic air vent if required. For WRAS approved MLCP (MultiLayer Composite Pipe), Emmeti Monoblocco connectors, plastic or metal mounting brackets, blanking plugs and ball valves please refer to the relevant pages within this section. Description Ways Pcs/Pack Code Unit Price ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¼ 09.9 ¼ 09. ¼ ¼ ¼ ¼ ¼ ¼ ¼ A distribution only manifold in nickel plated brass. ¾ or F connection at each end with x9 outlet connection. ½ F port for connection of a manual or automatic air vent if required. For WRAS approved MLCP (MultiLayer Composite Pipe), Emmeti Monoblocco connectors, plastic or metal mounting brackets, blanking plugs and ball valves please refer to the relevant pages within this section. For more information please call us on or view our website at
7 Manifolds (continued) Topway SN manifold assembly Ball Valves A range of ¾, and ¼ Ball Valves are available. For the complete range please refer to section system components or visit our website Monoblocco Connectors A range of Monoblocco connectors are available to suit pipe sizes 0mm - 0mm, and different pipe types PB,PE-Xa, PE-RT, MLCP and Copper. For the complete range please refer to the relevant pages within this section or visit our website Manifold Code 090 -way to way ¾ mm ctrs. Code way to 090 -way ¾ 0mm ctrs. Code way to way 0mm ctrs. Code 09 -way to 090 -way ¼ 0mm ctrs. Order per set Blanking Plug Code ½ M with O-ring seal Blanking Plug Code ¾ M with O-ring seal Code M with O-ring seal Code ¼ M with O-ring seal Double Metal Brackets 0mm centres Code 9000 ¾ Code Code ¼ supplied in pairs Additional Bracket Options Single Metal Brackets (Sold in pairs) Code ¾ Code Code ¼ Plastic Brackets (Sold in packs of 0 pairs) Code ¾ Code Aluminum Slider Rail Order two per manifold or one 00mm slider rail as this can be snapped into two 00mm lengths by hand. Code mm or Code mm. For more information please call us on or view our website at
8 Manifolds (continued) Modular simple manifold mm Distance between takeoffs : mm Modular manifold assembly Description Ways Pcs/Pack Code Unit Price ¾ ¾ ¾ For copper, MultiLayer, PEX, PP, PB pipe. For use with plastic brackets. For mm interaxial spacing a 7mm spanner is required, code: 0008 or 000. For WRAS approved MLCP (MultiLayer Composite Pipe), Emmeti Monoblocco connectors, plastic or metal mounting brackets, blanking plugs and ball valves please refer to the relevant pages within this section. Ball Valves A range of ¾ and Ball Valves are available. For the complete range please refer to section system components or visit our website Monoblocco Connectors A range of Monoblocco connectors are available to suit pipe sizes 0mm - 0mm, and different pipe types PB, PE-X, PE-RT, MLCP and Copper. For the complete range please refer to the relevant pages within this section or visit our website Manifold Code 0000 ( way) to 000 ( way) ¾ Code 0000 (way) to 000 ( way) Blanking Plug Code ¾ M with O-ring seal Code M with O-ring seal Plastic Brackets Code 000 ¾ or 000 Sold in boxes of 0 pairs. Aluminum Slider Rail Order two per manifold or one 00mm slider rail as this can be snapped into two 00mm lengths by hand. Code mm or Code mm. For more information please call us on or view our website at
9 Pipe and Accessories Gerpex MultiLayer pipe (PE-X/AL/PE-X) for Plumbing systems 009 Description Coils Code Unit Price /m x 00m x 00m x 00m x 00m x 00m x 0m x 0m Description m Bar Code Unit Price /m x 9m * x 9m * x 0m * x 8m * x. 0m * x 0m * x. m * x m * WRAS approved, layer pipe constructed using PE-Xb-AL-PE-Xb up to mm with PE-Xb-AL-PE-HD from 0mm to 7mm. Available in coils up to mm and in metre bars throughout the range. Maximum operating pressure 0 bar, maximum operating temperature 9 o C. * Packs of m bar lengths, subject to transport surcharge, see carriage and delivery terms on page. Gerpex Insulated MultiLayer pipe (PE-Xb-AL-PE-Xb) for Plumbing systems 009 Description Insul. Thick Coil Code Unit Price /m x mm 0m x mm 00m x mm 0m x 9mm 0m 800. x 9mm 0m x 9mm m WRAS approved, layer pipe constructed using PE-Xb-AL-PE-Xb. Available in coils up to mm. Insulation thickness mm up to 0mm pipe and 9mm insulation thickness for sizes 0, and mm pipe. Maximum operating pressure 0 bar, maximum operating temperature 9 o C. Gerpex MultiLayer Composite Pipe (Insulated and Colour Coded) 009 Description Colour/Insul. Thick Coil Code Unit Price /m x Red / mm 00m 800. x Blue / mm 00m x Red / mm 0m x Blue / mm 0m x Blue / 0mm 0m x Blue / mm 0m 80. x Blue / mm m x Blue / mm m WRAS approved, layer pipe constructed using PE-Xb-AL-PE-Xb. Available in coils up to mm. mm and 0mm avilable in both red and blue. and mm available only in blue. Maximum operating pressure 0 bar, maximum operating temperature 9 o C. Gerpex Multilayer Composite Pipe in Corrugated Conduit Description Colour Coil Code Unit Price /m x Red 0m x Blue 0m Description: x mm Gerpex MLCP encased within flexible conduit. For more information please call us on or view our website at 7
10 Pipe and Accessories (continued) Monoblocco connector for plastic PB polybutylene pipe Description Thread Pcs/Pack Code Unit Price 0 x x Monoblocco connector for copper pipe Monoblocco connector for MLCP MultiLayer composite pipes Monoblocco connector for PE-X, Pure PE-RT and PP Please ensure you use the plastic pipe insert pro vided for by the manufacturer of the pipe you are using. Description Thread Pcs/Pack Code Unit Price 0 x x9 0.8 Description Thread Pcs/Pack Code Unit Price x. x x x x x x. x x x x x x. x x x Note: Manifolds with x9 takeoff connections can be adapted for use with x. Monobloccos by using the following fitting: x9f - x.m, code 00. See page 0. Description Thread Pcs/Pack Code Unit Price x x x x x.7 x x. x x x x. x x x x x x. x9 8008* 7. Not suitable for use with MLCP Pipe, see correct connector above. Note: Manifolds with x9 takeoff connections can be adapted for use with x. Monobloccos by using the following fitting: x9f - x.m, code 00. See page 0. * Available while stocks last. MLCP to Copper Connectors x - mm x - mm x - 8mm 09R0 9. A Monoblocco fitting developed to allow MLCP to be connected to standard copper compression fittings. For example, mm MLCP can be connected to a mm lever valve by using code For more information please call us on or view our website at
11 Pipe and Accessories (continued) Pipe shears Ø Spare blade Pipe shears with guide Rotary pipe slices Leakage test plug for MultiLayer Pipe - ½ F fitting Ø Spare blade Pipe slice Ø Spare wheel Pipe slice Ø x x Complete with ½ F Fitting for air release valve (provided standard) or pressure gauge (optional). Flarer and calibrator for MultiLayer pipe Ø U Ø 0 U For preparing the cut end of pipe prior to insertion of fitting. Manifold Accessories Backless on-wall manifold cabinet for heating manifolds L00 (80 x 0 x ) U L 0 (0 x 0 x ) U L80 (0 x 0 x ) U L80 (80 x 0 x ) U L00 (00 x 0 x ) U L0 ( 0 x 0 x ) U A range of backless metal cabinets designed to be fitted once the manifold has been fitted, tested, commissioned and decoration has been completed. Please see cabinet sizing technical guide at for correct selection. For more information please call us on or view our website at 9
12 Manifold Accessories (continued) Manifold cabinet in galvanized steel with white enamelled door Key lock for in wall manifold cabinets Termobox - white plastic universal manifold box Copper adaptor; brass chrome-plated L00MM (0 x 00 x 80-0) L700MM (70 x 00 x 80-0) L80MM (90 x 00 x 80-0) L000MM (00 x 00 x 80-0) L00MM (0 x 00 x 80-0) Door to fit flush with finished surface. Box for manifolds, flush fitting with adjustable depth. Supplied complete with quarter turn catch, feet adjustable for height from 0 to 00mm and cover for protection during site work. Key lock can be purchased separately see code Key lock x 0 x x 0 x x 0 x Integrated into the back panel of the box are two slider rails, to support an upper and lower manifold when used with slider rail brackets. Suitable for use with hot and cold plumbing manifolds, as well as heat ing manifolds. Knock out panels allow for pipe distribution on all sides. For manifold sizing information, please see our website mm copper x M BSP U9008. mm copper x ¾ M BSP U Straight male fitting ½ - x. ½ M BSP - x Complete with O-ring on ½ BSP male side. Straight fitting female x9 - male x. x9 - x Complete with O-ring and adaptor for female connection Straight swivel adaptors, nickel-plated M x M ¼ M x ¼ M ¼ M x M reducer 00. ¾ M x ¾ M 00. Allows orientation of product during installation. 0 For more information please call us on or view our website at
13 Manifold Accessories (continued) Straight male-male adaptors M x M with O-ring seal ¼ M x ¼ M with O-ring seal For bridging between Topway manifolds. Blanking plugs, male and female Female washers Reducer fittings, nickel-plated ½ M with O-ring seal ¾ M with O-ring seal M with O-ring seal ¼ M with O-ring seal ¾ F (*) 09.8 F (*) x9 F with O-ring seal 00. (Manifold outlet cap) (*) Use the appropriate washer ( or ) shown below when ordering these items. ¾ F F ¾ M x a F ¾ M x ½ F M x a F M x ½ F M x ¾ F ¼ M x ½ F ¼ M x F ½ M x ¼ F with O-ring seal and gasket Metal brackets for Topway manifolds, pairs of single brackets Description Pcs/Pack Code Pair Price ¾ Pair Pair ¼ Pair Metal brackets for Topway manifolds, pairs of double brackets Description Centres Pcs/Pack Code Pair Price ¾ 00mm Pair mm Pair ¼ 00mm Pair ¾ 0mm Pair mm Pair ¼ 0mm Pair For use when fitting a manifold to either a 00mm or 0mm centre control group. For more information please call us on or view our website at
14 Manifold Accessories (continued) Plastic bracket support kits for Topway and TopSan manifolds Description Size Pcs/Pack Code Pack Price 0 pairs bracket support kit ¾ pairs bracket support kit To be used with slider rails or Termobox cabinet. Plastic bracket support kits for Modular and Multiplex manifolds Aluminium slider rail for bracket support kits supplied with screw and rawlplug pack Insulating shells for Topway manifolds Extension piece for Topway manifolds Description Size Pcs/Pack Code Pack Price 0 pairs bracket support kit ¾ pairs bracket support kit To be used with slider rails or Termobox cabinet. 00mm mm Provided with two.mm DIA pre-drilled holes. The 00mm version is provided with four.mm DIA pre-drilled holes, in two pairs spaced 0mm apart. Kiss cut at 00mm. ¼ In extruded polyethylene. branch holes at 0mm intervals. To be cut to size according to the number of ways of the manifold to be insulated. M-F c/w ½ blanked port M-F ¼ no port 00.9 Used to offset either the flow or return angled ball valves on the left side of a manifold. It allows you to run pipe vertically and parallel. 7 mm Spanner for straight swivel adaptors 7mm - 8mm AF 7-8mm Two are required when tightening swivel adaptors. For more information please call us on or view our website at
15 Manifold Accessories (continued) 7mm-0mm AF spanner for tightening x9 Monoblocco connectors 7-0mm Design to easily tighten the takeoff connections in the mm interaxial space provided. The 0mm jaw is designed for use with larger Monoblocco connec tors. 7mm AF spanner for tightening x9 Monoblocco connectors 8mm AF spanner for x.mm Monoblocco connectors 7mm For Monoblocco connectors up to dia 8mm only. Shoulderless spanner for manifolds with mm interaxials. 8mm To be used for the tightening of Monoblocco connectors x. on the takeoff connections of Topway manifolds with 0mm connector spacing. For more information please call us on or view our website at
Section 1 - Sanitary Manifolds
Topway SN WRAS approved nickel plated extruded brass manifold in ¾, 1 and 1¼ sizes, and DN20 outlets Available with ½ F outlets for connection to alternative pipe types Available in from 2 to 12 ways per
More informationWall Hung Radiator Systems. Wall Hung Radiator Systems
Wall Hung Radiator Manifold Overview Manifold systems are widely used with underfloor heating and this same principle can be applied to wall hung radiators. By using an Emmeti manifold system in a point
More informationManifolds Pipe Systems Accessories
Engineered Water Solutions Hot and Cold Manifold Systems Manifolds Pipe Systems Accessories www.emmeti.co.uk Company Overview The Group Our parent company Emmeti S.p.A. was founded in 97, initially marketing
More informationEngineered Water Solutions 2017 HEATING & PLUMBING PRODUCT PRICE LIST.
Engineered Water Solutions 2017 HEATING & PLUMBING PRODUCT PRICE LIST www.emmeti.co.uk Company Overview Company Overview The Group Emmeti S.p.A. was founded in 1976, initially marketing components for
More informationCross Linked MLCP Press & Compression Fittings Tooling
Engineered Water Solutions GERPEX Multi-Layer Composite Pipe & Press Fit System Cross Linked MLCP Press & Compression Fittings Tooling www.emmeti.co.uk Company Overview The Group Our parent company Emmeti
More informationT2 Wall Hung Radiator & UFH Manifolds
T Wall Hung Radiator & UFH Manifolds T Topway LS Pre-Assembled Heating Manifold A range of nickel plated extruded brass manifolds pre-assembled for immediate installation for both radiator and underfloor
More informationT2 Wall Hung Radiator & UFH Manifolds
T Wall Hung Radiator & UFH Manifolds T Topway LS Pre-Assembled Heating Manifold A range of nickel plated extruded brass manifolds pre-assembled for immediate installation for both radiator and underfloor
More informationManifolds Controls Pipe Accessories
Engineered Water Solutions Wall Hung Radiator Heating Systems Manifolds Controls Pipe Accessories www.emmeti.co.uk Company Overview The Group Our parent company Emmeti S.p.A. was founded in 97, initially
More informationPLUMBING SYSTEMS PIPE & FITTINGS
PIPE & FITTINGS MLCP MultiLayer Pipe & Fittings By combining PE-RT and aluminium, a new technologically advanced material is formed, providing security and safety. Our Multitubo systems MLCP is designed
More informationPLUMBING SYSTEMS PIPE & FITTINGS
PIPE & FITTINGS MLCP MultiLayer Pipe & Fittings Our MLCP product offering By combining PE-RT and aluminium, a new technologically advanced material is formed, providing security and safety. Our Multitubo
More informationplumbaseindustrial.co.uk SYSTEMS PRICE GUIDE Multilayer Pipes and Fittings. HIU's, Meters & Valves
SYSTEMS PRICE GUIDE 2018 JANUARY 2018 Multilayer Pipes and Fittings HIU's, Meters & Valves Underfloor Heating - Domestic, Commercial, Electric Pre-Insulated Pipe Systems WWW.MULTIPIPE.CO.UK plumbaseindustrial.co.uk
More informationFOR HEATING & PLUMBING SYSTEMS
Quality Plastics Ltd. Pushfit Option Compression Option MANIFOLD SYSTEM ADVANTAGES: Central Control. Eliminates variations in pressure and flow. Individual pipes to each outlet allowing separate shut-off
More informationHeating Manifold Systems
Bathroom thermostat and remote sensor Engineered Water Solutions Product Focus Topway T2 Manifolds T3 Controller Control T EWC-1 Wiring Box Zone Controls Alpert UFH Pipe Heating Manifold Systems High Temperature
More informationFCU Floor Control Unit
Fully assembled with integrated M3V Control Group including mixing valve and circulating pump and in-line high and low temperature Topway T2 FM manifold options with high and low temperature manifold options
More informationPRODUCT CATALOGUE EFFECTIVE FROM 1 ST JANUARY 2013 MULTI-LAYER PIPE & PRESS FITTING SYSTEM
PRODUCT CATALOGUE EFFECTIVE FROM 1 ST JANUARY 2013 MULTI-LAYER PIPE & PRESS FITTING SYSTEM PRESSTITE INTRODUCTION Introduction to Presstite Presstite Multilayer is a composite pipe system using the advantages
More informationCONEX Works, Santry Avenue, Dublin 9, Ireland Tel: (0) Fax: (0)
CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: 00 353 (0)1 842 6255 Fax: 00 353 (0)1 842 6134 Email: sales@sanbra.ie MULTILAYER PIPING SYSTEMS I.S. EN ISO 21003-1:2008 NSAI Certified PRODUCT OVERVIEW
More informationTaps, Valves & Components. Section 1
Taps, Valves & Components Section 1 taps, valves & components index Index 1 SECTION PAGE sink taps 1.1-1.4 sink taps & spares 1.5 basin taps 1.6 general purpose taps & valves 1.7 flexible connectors, angle
More informationLeading the way in the innovation of Flexible Plumbing and Underfloor Heating. UPONOR LIMITED. Price Guide September 2011
UPONOR LIMITED Price Guide September 2011 Leading the way in the innovation of Flexible Plumbing and Underfloor Heating. Uponor: more than products. Uponor Limited provides plumbing and heating systems
More informationCONEX Works, Santry Avenue, Dublin 9, Ireland Tel: (0) Fax: (0)
CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: 00 353 (0)1 842 6255 Fax: 00 353 (0)1 842 6134 Email: sales@sanbra.ie PRODUCT OVERVIEW NSAI Certified to EN ISO 21003 and WRAS approved. INSTANTOR Press
More informationTable of contents. Chapter 1: Fusiotherm. Chapter 4: climasystem Produktgruppe 20. Chapter 5: aquatherm. Chapter 2: aquatherm SHT.
Table of contents Chapter 1: Fusiotherm 01 Fusiotherm -pipe 04 climatherm-pipe & aquatherm-lilac 07 Accessories 09 Fittings 15 Weld-in saddle 19 Threaded connections and accessories 22 Transition pieces
More informationPart No: Genuine Mira Accessories
Bar Valve Fixing Kit Part No: 1663.017 Genuine Mira Accessories 1 Introduction Please take time to read this guide thoroughly, having done so, keep it handy for future reference. This Fixing Kit has been
More informationSolar Thermal. Grant Solar Pump Station Installation & Servicing Instructions
Solar Thermal Grant Solar Pump Station Installation & Servicing Instructions Part No. DOC 96. Rev 02. October 2012 Important Note Important Note for Installers The Pump Station supplied with your Grant
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationSOIL-10 ST Single Branch Tee. SOIL-11 SU Double Branch Tee. SOIL-14 SN32 32mm Rubber Boss Adaptor
POLYE SOIL FITTINGS 1 Grey ring seal soil and vent PVC-U, EN1329-1, BS4514:2001 Stock range shown below, other sizes and types of fittings available SOIL-1 SP430 Tube 3mtr length SOIL-10 ST401 92.5 Single
More informationSOLDER RING FITTINGS GENERAL RANGE
Product Guide Size Pk Pk Code SOLDER RING FITTINGS GENERAL RANGE Fittings are manufactured from and alloy Available in sizes from 8-4mm Fittings are designed for jointing tubes to BS EN 7 in hot and cold
More informationManifold Isolation Valves
300 N. Opdyke Rd. Introduction The Stainless Manifolds are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options
More informationSYSTEM KAN-therm. Underfloor heating. Comfort and efficiency TECHNOLOGY OF SUCCESS ISO 9001
SYSTEM KAN-therm Underfloor heating Comfort and efficiency TECHNOLOGY OF SUCCESS ISO 9001 The underfloor heating of System KAN-therm - pipes and pipe accessories KAN-therm pipe PE-RT with EVOH layer for
More informationPEX Plumbing & Radiant Heating Systems
PEX Plumbing & Radiant Heating Systems PEX0118 Customer Guide Effective January 1, 2018 Replaces All Previous Price Lists TABLE OF CONTENTS BY SECTION ZURN PEX PLUMBING PRODUCTS HOT/COLD POTABLE (NON-BARRIER)
More informationTable of Contents. SeaTechInc.com
Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick
More informationSYSTEM KAN-therm Push Platinum
SYSTEM KAN-therm Push Platinum ISO 9001 TECHNOLOGY OF SUCCESS Contents Page System KAN-therm Push Platinum - General information... 3 Multi-layer PE-Xc/Al/PE-HD Platinum pipes... 5 Parameters of multi-layer
More informationPEX F2080 POWER. Buying Information. Supply Drainage Support.
POWER PEX F2080 Buying Information Supply Drainage Support www.siouxchief.com PowerPEX ASTM F2080 Fitting System Engineered for Premium Returns Sleeves Fittings Engineered Products Valves Manifolds Tools
More informationWide range of tools for Plumbing and Underfloor Heating systems. Part No. Width Unit Price Each
Wide range of tools for Plumbing and Underfloor Heating systems Mini Press Tool Deal Mini Press + 16, 20, 25, 32, Jaws MAXI Press Tool Deal MAXI Press + 16, 20, 25, 32, 40, 50, 63, 75 Jaws call us on 01245
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More information40 geothermal ground loop manifolds
40 geothermal ground loop manifolds GeoCal (key features listed left) This is the first thermoplastic, fully modular manifold system designed specifically for installations using ground source heat pumps.
More informationInstallation Guide&Product Handbook
Installation Guide&Product Handbook POLYPIPE BUILDING PRODUCTS LTD HOT & COLD PLUMBING & HEATING SYSTEM www.polyplumb.co.uk UNDERFLOOR CENTRAL HEATING SYSTEM www.ufch.com COLD WATER SUPPLY SYSTEMS incorporating
More informationNew version of the catalogue has been modified, both from the point of commercial information
04/2013 Marketing and commercial information of KAN GROUP New offer of KAN-therm - catalogue 03/2013 With great pleasure we offer you new edition of the catalogue KAN-therm 03/2013. New version of the
More informationMANIFOLDS & WATER TEMPERATURE CONTROL
MANIFOLDS & WATER TEMPERATURE CONTROL Overview Water based underfloor heating (UFH) systems work by turning the entire floor into one large low temperature radiator which is heated via a network of pipes
More informationCALEFFI. Pre-assembled distribution manifolds for radiant panel systems. series 663 & /05 NA. Function
Pre-assembled distribution manifolds for radiant panel systems series & / NA Function Distribution manifolds for radiant panel systems are used to optimally distribute the heating fluid in floor heating
More informationAnti Siphon Ballcock RP Anti-Siphon Ballcock
UR PS1115 Effective November 1, 2015 (SUPERCEDES PS0514 ) The issuance of this price list is not an offer to sell the goods listed herein at the prices stated. Anti Siphon Ballcock 109-603RP Anti-Siphon
More informationPVC Couplings. Brass Couplings BRASS COMPRESSION COUPLING 3 -LENGTH PVC COMPRESSION COUPLING BRASS COMPRESSION COUPLING 5 -LENGTH
& FITT Brass Couplings BRASS COMPRESSION COUPL 3 -LENGTH 46331 3/8 1/2 12 120 5.80 46332 1/2 3/4 12 120 7.38 46333 3/4 1 6 72 10.52 46334 1 1 1/4 6 60 13.44 46335 1 1/4 1 1/2 4 48 18.00 46336 1 1/2 4 36
More informationCONTENTS. Procrimp Water and Gas Pipe and Fitting System 4. Procrimp Brass Fittings 5. Procrimp Brass Fittings Range 6
2 CONTENTS Procrimp Water and Gas Pipe and Fitting System 4 Procrimp Brass Fittings 5 Procrimp Brass Fittings Range 6 Propex Water Pipe Specifications 8 Propex Gas Pipe Specifications 10 Propex Gas Sizing
More informationCALEFFI. Pre-assembled distribution manifolds for. heating and air-conditioning systems. 663 series 01065/18 GB. replaces dp 01065/06 GB.
Pre-assembled distribution manifolds for heating and air-conditioning systems 663 series FM 21654 003 065/18 GB replaces dp 065/06 GB Function The pre-assembled distribution manifolds are designed to optimise
More informationM-8100EP. Installation Guide ENGINEERED PLASTIC MANIFOLD SERIES. Introduction. A. Assemble Manifold Components
Introduction The Pro Manifolds with Integrated adaptor are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options
More informationDuo water control system
Duo water control system Installation and maintenance guide DUOINSTRUCT Contents Important and safety information Pack contents / Tools required Duo trim plate dimensions Flow performance Typical wall
More informationM Installation Guide. PRECISION Manifold Series. Introduction. A. Assemble Manifold Components
Page 1 Introduction The M-8200 Precision Manifolds are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options with
More informationMrPEX 1 ½ " Brass Manifold Installation Guide
MrPEX 1 ½ " Brass Manifold Installation Guide Design MrPEX 1 ½" Brass Manifold is made from high quality alloy extruded and chrome plated after machining, and is offered in 2 through 12 loop configurations.
More informationWide range of tools for Plumbing and Underfloor Heating systems
Wide range of tools for Plumbing and Underfloor Heating systems We offer a wide range of tools for plumbing and underfloor heating system applications. We regularly have special offers and deals on tools
More informationPRODUCT CATALOGUE 2011
INNOVATIVE PIPESYSTEMS- SUCCESSFULL WORLDWIDE Fusiotherm climatherm aquatherm lilac aquatherm ISO aquatherm aquatherm SHT climasystem PRODUCT CATALOGUE 2011 Fusiotherm climatherm aquatherm lilac aquatherm
More informationEye Wash Unit S0201 for Scrub Sinks
Eye Wash Kit S0201 for Scrub Sinks The Eye Wash Unit provides flushing fluid to both eyes simultaneously. The flushing streams rise to approximately equal heights on both sides. The two spray heads have
More informationAUXILIARY MACHINES, TOOLS AND ACCESSORIES
AUXILIARY MACHINES, TOOLS AND ACCESSORIES MACHINES Workshop band saws for cutting plastic pipes, specially designed to work together with the ALFA fittings machines (construction of special fittings by
More informationA range of shower fittings, precision engineered to provide an effective shower at all pressures. Available with either fixed or swivel heads
shower fittings/accessories general purpose shower fittings A range of shower fittings, precision engineered to provide an effective shower at all pressures Available with either fixed or swivel heads
More informationW Range Solder Ring Fittings
//7 TECH DATA SHEET 49 W Range Solder Ring Fittings Size Pk Pk Code MERCIA W RANGE SOLDER RING FITTINGS GENERAL RANGE Fittings are manufactured from and alloy Available in sizes from 8-4mm Fittings are
More informationGeneral Equipment. Content - Section 8. Grease Nipples. Grease Equipment. Garage Equipment. Coils, Plugs & Sockets. Electrical Cable.
8 General Equipment Content - Section 8 Grease Nipples Grease Equipment Garage Equipment Coils, Plugs & Sockets Electrical Cable Test Kits Tube Cutter Flaring Tool 8.1 General Equipment Grease Nipples
More informationContents. The Company Page 4. Female Lever Valves Page 5. Female Gate Valves Page 6. Bronze Gate Valves Page 7. Angle Valves Page 8-9
VALVES CATALOGUE Contents The Company Page 4 Female Lever Valves Page 5 Female Gate Valves Page 6 Bronze Gate Valves Page 7 Angle Valves Page 8-9 Float Valves Page 10-11 Foot Valves Page 12 Spring Check
More informationInstruction Manual Includes:
Instruction Manual Includes: Page 1: HydraHorse Installation for Basic 2- Horse System Part I: Tank, pump, and electrical supply Page 6: Page 9: Part II: Page Bowls, Brackets, Pipes and Fittings Installing
More informationLamontite Securex Solder Ring Chrome Brazing Kingley Tools Flanges & GHD Valves Copper tube
Specialists in Plumbing Fittings Lamontite Securex Solder Ring Chrome Brazing Kingley Tools Flanges & GHD Valves Copper tube Specialists in Plumbing Fittings Tel: 04 558 882 04 558 5599 Fax: 04 558 9966
More informationAIR SHOWER & TUB REP
SHOWER & TUB REPAIR 02-2091 Price Pfister, Ball Joint, O-Ring, 403927 For Shower Head. 03-1251 403954 Fiberglass Shower Drain, Fits 2 Cast Iron, Steel, ABS, or PVC, Seals With Compression Gasket. 02-3027
More informationFittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
More informationPVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
More informationUnderfloor Heating. Solid floor Floating floor Suspended floor. Overlay. Ultra Flexible Underfloor Heating Pipe. Manifolds - All Floor Systems
UNDERFLOOR HEATING The primary aim of the floor heating system is to create an even, uniform surface temperature across the entire floor area within the building in order to ensure a consistent comfort
More informationACCOUPLEMENTS COUPLINGS ASYBCO
ACCOUPLEMENTS COUPLINGS ASYBCO PETROLEUM TANKER PRODUCTS Bayco BAYCO Bayco COUPLINGS RACCORDS BAYCO Adapteur / Adaptor A Raccord / Coupler B Racoord / Shank Coupler C Raccord / Coupler D Adapteur à
More informationSaf-T Vent EZ Seal. Technical and Dimensional Data. Single Wall AL 29-4C Stainless Steel Special Gas Vent
Technical and Dimensional Data Saf-T Vent EZ Seal Single Wall AL 29-4C Stainless Steel Special Gas Vent 130 Industrial Boulevard Turners Falls, MA 01376 Copyright 2001 Heat-fab, Incorporated Saf-T Vent
More informationPage ATALOGUE. Web: Tel: Fax:
Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION
More informationcomfort, safety and convenience
PRODUCT CATALOG MARCH 2011 Plumbing Systems Fire Sprinkler Systems Flawlessly moving water to provide the ultimate in comfort, safety and convenience for residential and commercial applications. That s
More informationCHOOSING YOUR MANIFOLD & LOCATION
CHOOSING YOUR MANIFOLD & LOCATION THOUGHTS ON ZONING The function of a manifold is to distribute the correct flow to each loop to meet its specific heating load. This is achieved by balancing each loop
More informationTECHNICAL CATALOGUE DISTRIBUTION MANIFOLDS
TECHNICAL CATALOGUE DISTRIBUTION TEC ITAP SpA, founded in Lumezzane (Brescia) in 972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing
More informationMARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationCALEFFI. Manifolds in composite specifically designed for radiant panel systems. 670 series 01126/05 GB. Function
Manifolds in composite specifically designed for radiant panel systems 670 series cert. n 000 ISO 900 CALEFFI 06/05 GB Function Manifolds in composite are used to control and distribute the fluid in the
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationVALSIR SUPPLY SYSTEMS MIXAL
TECHNICAL DATA SHEET VALSIR SUPPLY SYSTEMS MIXAL The product Mixal is an extremely flexible multilayer pipe and is therefore ideal for the creation of floor, wall and ceiling radiant heating and cooling
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationTHE KEENEY MANUFACTURING COMPANY
Brass Tubular P Traps 1-8 Repair Traps 8-9 S Traps 9-11 Sink Traps 11-15 Bath Traps 15 Washing Machine Traps 16 J Bends 16-17 Sink Trap J Bends 17-18 Wall Bends 19 Floor Tubes 19 Center Outlet Continuous
More informationNAME OF PAGE. Opening paragraph. header. header. header. header PAGE 1
NAME OF PAGE PAGE 1 Opening paragraph header header header header 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6 7 7 7 7 8 8 8 8 TABLE OF CONTENTS PAGE 1 PAGE 2-4 Infloor Bpex, Pex Al Pex Tubing and Potable
More informationSYSTEM KAN-therm Push Platinum ISO 9001
SYSTEM KAN-therm Push Platinum ISO 9001 Contents Page System KAN-therm Push Platinum - General information...3 System KAN-therm Push Platinum - Technical information...4 Multi-layer PE-Xc/Al/PE-HD Platinum
More informationMANIFOLDS AND DISTRIBUTION EQUIPMENT
MANIFOLDS AND DISTRIBUTION EQUIPMENT - Radiators distribution equipment... 52 - Components for radiators... 57 - Underfloor heating/cooling distribution equipment... 58 - Modular manifolds... 60 - Components
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1
More informationPrice List Radiant Heating & Cooling, Plumbing, Local Heat Distribution and HIUs
Price List 2018 Radiant Heating & Cooling, Plumbing, Local Heat Distribution and HIUs Build on Uponor solutions Uponor Limited provides plumbing and heating solutions for all building types, from one bedroom
More informationSnow Melt EN_US_2014_V2.indb 171 2/7/ :18:52 AM
171 Viega snow melting systems are complete hydronic solutions for residential, commercial and industrial applications. All it takes is ViegaPEX Barrier tubing installed in a concrete slab and the proper
More informationCut Off and Deburring
Cut Off and Deburring Cut Off and Deburring Heavy Duty Pipe Cutters Heavy-Duty Pipe Cutters RIDGID Heavy-Duty Pipe Cutters for fast, burr-free cutting of steel pipes up to. Extra-long shank protects adjustment
More informationComponents for central heating
01 01 Components for central heating Booster units and spare parts 18 Hydraulic separator and spare parts 21 Dirt separators - Deaerators 23 By-Pass differential valve - Air separator units 32 Filling
More informationAC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
More informationLinea - Line. raccordi a compressione compression fittings
5300 Linea - Line raccordi a compressione compression fittings Raccordi a compressione/ Compression fittings SYSTEM FIELDS OF APPLICATION Mainly used in distribution systems for drinking water, sanitary
More informationUtility Tap Solutions
Utility Tap Solutions For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk 0844 556 1818 Hotels Manufacturing Airports Social Housing Offices Leisure Centres
More informationgabotherm gabotherm gabotherm Pipes PB Polybutene Pipes 13 PE-Xc Pipes 15 PE-RT Pipes 16 MV Pipes (Multilayer Composite Pipes) 17
gabotherm Pipes gabotherm PB Polybutene Pipes 13 PE-Xc Pipes 15 PE-RT Pipes 16 MV Pipes (Multilayer Composite Pipes) 17 SR Pipes (Protective Pipes) 18 7 gabotherm Rohre Polybutene Pipes: Polybutene is
More informationSINGLE MANIFOLDS TECHNICAL DATA SHEET10/ ENG
FUNCTION ICMA distribution manifolds are manufactured starting from a special profile of brass bar drawn into CW617-N. They can be divided into: Distribution manifolds with or without connection fittings
More informationRAUTITAN - water, gas & heating PRODUCT BOOK. Valid from December Construction Automotive Industry
RAUTITAN - water, gas & heating PRODUCT BOOK www.rehau.com Valid from December 2011 Construction Automotive Industry RAUTITAN The New Generation RELIABLE. VERSATILE. SECURE. SYSTEM OVERVIEW The RAUTITAN
More informationSOLUTIONS GUIDE. For total efficiency
2014-2015 SOLUTIONS GUIDE For tal efficiency THERMOSTATISABLE, FIXED KV, ANGLE WITH MANUAL HANDWHEEL 808CMJ Left or right mounted angle, M28-head TIP EXAMPLES OF 1-PIPE INSTALLATIONS Standard 1-pipe installation
More informationKey Installation Points. Table of Contents
Installation Guide Key Installation Points Table of Contents All pipe sizes in this guide are internal diameter (DN) We recommend PE-X pipe NOT copper pipe Check pipes sizes For domestic installations
More informationAir Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
More informationProduct Catalog. Just because it s in the floor doesn t mean it s INFLOOR.
Product Catalog Just because it s in the floor doesn t mean it s INFLOOR www.infloor.com TABLE OF CONTENTS Tubing New Style Brass Manifolds & Related Components Current Brass Manifolds & Related Components
More informationPre-assembled distribution manifolds for radiant panel systems
Pre-assembled distribution manifolds for radiant panel systems Function Distribution manifolds for radiant panel systems are used to optimally distribute the heating fluid in floor heating system circuits
More information1901 Thermostatic Shower Mixer
1901 Thermostatic Shower Mixer (Universal Valve with Adjustable Riser, Surface Mounted Valve with Rigid Riser or Recessed Valve with Fixed Head) Fitting Instructions & Contents List Before starting any
More informationGeberit Concealed cisterns
Factory setting Description Front actuation 12 cm thick cm thick 6/3l for Geberit Sigma actuator plates Page 4 /3l for Geberit Delta actuator plates Page 6 6 / 3 l for Geberit Sigma actuator plates Page
More information10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationMETAL PRESSURE PIPE PIPE & TUBING PIPE & TUBING GALVANIZED PRESSURE PIPE ASTM A-53 ERW BLACK GAS PIPE ASTM A-53 ABOVE GROUND LARSEN SUPPLY CO., INC.
METAL PRESSURE PIPE GALVANIZED PRESSURE PIPE ASTM A-53 ERW 27-0100 B 1/8 700 Max work PSI Schedule 40 21 1 27-0200 B 1/4 700 Max work PSI Schedule 40 21 1 27-0300 B 3/8 700 Max work PSI Schedule 40 21
More informationTRADE PRICE LIST - 1st March Push-Fit Plumbing & Underfloor Heating
TRADE PRICE LIST - 1st March 2019 Push-Fit Plumbing & Underfloor Heating Contents Page Introduction to Hep 2 O Plumbing and Heating Systems 2 Hep 2 O Flexible Plumbing 3-13 Polybutylene Pipe 3 Demountable
More informationFLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is
More informationCompression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
More informationVANDAL RESISTANT FITTINGS VR105, VR125, VR145 (VR106, VR115 Export only) PRODUCT MANUAL IMPORTANT
VANDAL RESISTANT FITTINGS VR105, VR125, VR145 (VR106, VR115 Export only) PRODUCT MANUAL SHOWER FITTINGS IMPORTANT Installer: This Manual is the property of the customer and must be retained with the product
More information