Linea - Line. raccordi a compressione compression fittings
|
|
|
- Daniella Elliott
- 5 years ago
- Views:
Transcription
1 5300 Linea - Line raccordi a compressione compression fittings
2 Raccordi a compressione/ Compression fittings SYSTEM FIELDS OF APPLICATION Mainly used in distribution systems for drinking water, sanitary installations and in both low and high temperature cooling and heating installations. PIPE PIPE MULTIPLE ADVANTAGES IN INSTALLATIONS WITH PEX PIPES Chemical and electrochemical corrosion resistance. Abrasion resistance. Low load loss due to good homogenous surface. Low noise given high acoustic insulation coefficient Light weight. Long service life of system compared with wall structure, in the presence of the normally used pressure and temperature values in civil engineering plants. Atoxic and therefore excellent for transporting drinking water. Thightness to oxygen, vacuum and other gas. Easy adaptation of the pipe to any kind of bend and mantainance of the given form (memory effect). Good resistance to crashing. REGULATIONS AND USE CONDITIONS UNI METAL- PLASTIC MULTILAYER PIPE FOR HOT AND COLD WATER. The pipe meets requirements of the 4 application classes at a pressure of 10 Bars Application class Design T. C Time at TD years Tmax C Time at T malfunct. Tmax years C Time at T malfunct. Typical field of application 1 a 2 a Hot water supply 60 C 100 Hot water supply 70 C 4 a 40 2,5 70 2, Underfloor heating and low-temperature radiators a Underfloor heating and low-temperature radiators All layers shall be of sufficient thickness to meet requirements of this part of ISO FITTINGS PRODUCTION AND MATERIALS All the fittings are machined on transfer machines (from hot-stamping) and multi-spindle (from bars). The raw material is made up of hot-stamped pieces and brass bars. MATERIAL Hot-stamped pieces Barra O-ring Ring UNI EN CW617N-CuZn40Pb2 UNI EN CW614N-CuZn39Pb3 UNI EN Tipo WB (insulating) Cu57-59 Pb Sn<0.3 Fe<0.3 Ni<0.3 Al<0.05 Zn Diff. Cu57-59 Pb Sn<0.3 Fe<0.3 Ni<0.3 Al<0.05 Zn Diff. EPDM PEROX 70 PTFE (TEFLON) NOTE CONCERNING USED MATERIALS EPDM PEROX 70: All the gaskets are made of homologated peroxid EPDM for drinking water UNI EN type WB Perox grants perfect performances both at low and high temperatures in presence of acid, ozone and water. Perfect resistance to atmospheric agents and consumption. Working temperature: -0 C/+250 C. BRASS ALLOY: All the items made from hot-stamping comply with DIN which limits the lead content of the alloy to below 2.2%. PTFE: Perfect insulating material between aluminium and brass.extremely resistant to consumption and chemical agents. Working temperature: -0 C/ GENERAL FITTINGS
3 Raccordi a compressione/ Compression fittings FITTINGS SYSTEM COUPLING THREADS AND REFERENCE NORMS UNI EN ISO Fittings for plastic piping with compression terminals. ISO 228 Cylindrical gas threading. All the fittings connections to the system comply with this norm. SYSTEM REFERENCE NORMS AND TESTS UNI (UNI EN 712) (UNI EN 713) (UNI EN 715) (UNI EN 921) (UNI EN 12293) (UNI EN 12294) (UNI EN 12295) (ISO 6957) Metal- plastic multilayer pipe for hot and cold water Extract test Sealing test at internal pressure while subjected to bending Hydraulic seal test Resistance to internal pressure at constant T tests Test on termic cycles Vacuum test Test on pressure cycles Ammonia Test of the resistance to corrosion stress. SYSTEM ASSEMBLY INSTRUCTIONS Photo N o.1 Photo N o.2 Photo N o.3 Photo N o.4 Photo n 1 Cut the pipe perpendicular to its axis, using an appropriate tool. Photo n 2 Calibrate the pipe with the special reamer Photo n 3 Insert the pipe holder until the pipe is fully inserted up to the flange. Photo n 4 Tighten the nut until the torque reading is reached as shown in the table Linea - Line N.B. The number of tightening turns is calculated from the moment the nut begins to interact with the ring. Ø Pipe Coupling threading G G 3/4 3/4 1 M39x1.5 Tightening turns (+1/4) 3/4 3/4 GENERAL FITTINGS 173
4 Art raccordo doppio nichelato - Nickel plated double nipple Art raccordo femmina nichelato - Nickel plated female nipple N1400A 14 x 2, , N1600A 16 x 2, , N1800A 18 x 2,0 80 5, N00A x 2,0 60 5, N252500A 25 x 2, , N263000A 26 x 3, , N323000A 32 x 3, , N0414A x 14 x 2, , N0416A x 16 x 2, , N0418A x 18 x 2, , N04A x x 2,0 80 3, N042630A x 26 x 3,0 50 6, N0516A 3/4 x 16 x 2, , N0518A 3/4 x 18 x 2,0 80 3, N05A 3/4 x x 2,0 80 3, N052525A 3/4 x 25 x 2,5 50 6, N052630A 3/4 x 26 x 3,0 50 6, N102525k 1 x 25 x 2,5 40 6, N102630A 1 x 26 x 3,0 40 6, N103230A 1 x 32 x 3, ,48 Art raccordo maschio nichelato - Nickel plated male nipple Art raccordo ridotto nichelato - Nickel plated reduced straight N0316A 3/8 x 16 x 2, , N0414A x 14 x 2, , N0416A x 16 x 2, , N0418A x 18 x 2, , N04A x x 2, , N042630A x 26 x 3,0 50 5, N0516A 3/4 x 16 x 2,0 1 3, N0518A 3/4 x 18 x 2, , N05A 3/4 x x 2,0 80 3, N052525A 3/4 x 25 x 2,5 50 5, N052630A 3/4 x 26 x 3,0 50 5, N102525A 1 x 25 x 2,5 50 6, N102630A 1 x 26 x 3,0 40 6, N103230A 1 x 32 x 3, , N665600A x2,0 x 16x2,0 60 5, N6660A x2,0 x 18x2,0 60 5, N775600A 26x3,0 x 16x2, , N776600A 26x3,0 x x2,0 40 8, N806600A 32x3,0 x x2, , N807700A 32x3,0 x 26x3, , GENERAL FITTINGS
5 Art Tee nichelato - Nickel plated equal tee Art Tee femmina nichelato - Nickel plated female tee N1400A 14 x 14 x 14 x 2,0 60 7, N1600A 16 x 16 x 16 x 2,0 60 6, N1800A 18 x 18 x 18 x 2,0 30 9, N00A x x x 2,0 30 9, N252500A 25 x 25 x 25 x 2,5 14, N263000A 26 x 26 x 26 x 3,0 14, N323000A 32 x 32 x 32 x 3, , N0414A x 14 x 2,0 50 5, N0416A x 16 x 2,0 50 5, N0418A x 18 x 2,0 40 6, N04A x x 2,0 30 6, N0516A 3/4 x 16 x 2,0 30 7, N0518A 3/4 x 18 x 2,0 30 7, N05A 3/4 x x 2,0 30 7, N052525A 3/4 x 25 x 2,5 13, N052630A 3/4 x 26 x 3,0 13, N053230A 3/4 x 32 x 3, , N102630A 1 x 26 x 3,0 13, N103230A 1 x 32 x 3, ,53 Art Tee maschio nichelato - Nickel plated male tee Art Tee ridotto nichelato - Nickel plated reduced tee N0414A x 14 x 2,0 60 5, N0416A x 16 x 2,0 60 5, N0418A x 18 x 2,0 40 6, N04A x x 2,0 30 6, N0516A 3/4 x 16 x 2,0 40 7, N0518A 3/4 x 18 x 2,0 40 7, N05A 3/4 x x 2,0 30 7, N052630A 3/4 x 26 x 3,0 13, N053230A 3/4 x 32 x 3, , N102630A 1 x 26 x 3, , N103230A 1 x 32 x 3, , N566656A 16 x 2 x x 2 x16 x , N665656A x 2 x 16 x 2 x16 x , N665666A x 2 x 16 x 2 xx , N666656A x 2 x x 2 x16x , N775677A 26 x 3 x 16 x 2 x26x 3 15, N776677A 26 x 3 x x 2 x26x 3 15, N805680A 32 x 3 x 16x 2 x32x , N806680A 32 x 3 x x 2 x32x , N807780A 32 x 3 x 26 x 3 x32x , Linea - Line GENERAL FITTINGS 175
6 Art Tee ridotto maschio nichelato - Nickel plated male reduced tee Art Angolo doppio nichelato - Nickel plated double elbow N660456A x2xx16x2 40 8, N1400A 14 x 2,0 80 5, N1600A 16 x 2,0 80 4, N1800A 18 x 2,0 50 6, N00A x 2,0 50 6, N252500A 25 x 2,5 10, N263000A 26 x 3,0 10, N323000A 32 x 3,0,63 Art Tee ridotto femmina nichelato - Nickel plated female reduced tee Art Angolo maschio nichelato - Nickel plated male elbow N660456A x2xx16x2 40 9, N660556A x2x3/4x16x2 40 9, N0414A x 14 x 2, , N0416A x 16 x 2, , N0418A x 18 x 2,0 80 4, N04A x x 2,0 60 4, N0516A 3/4 x 16 x 2,0 70 4, N0518A 3/4 x 18 x 2,0 70 4, N05A 3/4 x x 2,0 50 4, N052525A 3/4 x 25 x 2,5 30 8, N052630A 3/4 x 26 x 3, N102525A 1 x 25 x 2, N102630A 1 x 26 x 3, N103230A 1 x 32 x 3,0 30 8,17 8,70 8,70 14, GENERAL FITTINGS
7 Art Angolo femmina nichelato - Nickel plated female elbow Art raccordo croce nichelato - Nickel plated cross fitting N0414A x 14 x 2,0 80 3, N0416A x 16 x 2,0 80 3, N0418A x 18 x 2,0 70 4, N04A x x 2,0 60 4, N0516A 3/4 x 16 x 2,0 40 4, N05A 3/4 x x 2,0 40 4, N052525A 3/4 x 25 x 2,5 30 9, N052630A 3/4 x 26 x 3,0 30 9, N102525k 1 x 25 x 2, , N102630A 1 x 26 x 3, , N103230A 1 x 32 x 3,0 14, N1400A 14 x 2, , N1600A 16 x 2, , N1800A 18 x 2,0 18, N00A x 2,0 18,86 Art Attacco a muro nichelato - Nickel plated wallplate elbow Art raccordo adattatore per tubo rame - Adapter for copper pipe N0414A x 14 x 2,0 50 4, N0416A x 16 x 2,0 50 4, N0418A x 18 x 2,0 50 4, N04A x x 2,0 50 4, N05A 3/4 x x 2,0 40 6, N161500A 16 x 2,0 x , Linea - Line GENERAL FITTINGS 177
4500 Linea / Line FIELDS OF APPLICATION SYSTEM
4500 Linea - Line Raccordi a compressione con anello tagliato per tubo in polietilene ad alta e bassa densità. Compression fittings for low and high density polyethylene pipe with brass ring 4500 Linea
CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: (0) Fax: (0)
CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: 00 353 (0)1 842 6255 Fax: 00 353 (0)1 842 6134 Email: sales@sanbra.ie MULTILAYER PIPING SYSTEMS I.S. EN ISO 21003-1:2008 NSAI Certified PRODUCT OVERVIEW
Raccordi gasolio forati 1 via. Connections eye no beat. Bicones brass joints. Fittings for braking and diesel systems
Raccordi gasolio forati 1 via Tipo di materiale: acciaio Filettatura metrica Code Desc. d x L x pace 1450000100 6x15x1 1450000195 8x16x1 1450000200 8x16x1,25 1450000210 10x23x1 1450000212 10x18x1,25 1450000214
CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: (0) Fax: (0)
CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: 00 353 (0)1 842 6255 Fax: 00 353 (0)1 842 6134 Email: sales@sanbra.ie PRODUCT OVERVIEW NSAI Certified to EN ISO 21003 and WRAS approved. INSTANTOR Press
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
SYSTEM KAN-therm Push Platinum
SYSTEM KAN-therm Push Platinum ISO 9001 TECHNOLOGY OF SUCCESS Contents Page System KAN-therm Push Platinum - General information... 3 Multi-layer PE-Xc/Al/PE-HD Platinum pipes... 5 Parameters of multi-layer
SUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
Precision machining brass rod
Precision machining brass rod The satisfaction of our customers requests is the guarantee of our high standards compliance and quality consistency Quality machined to Perfection Distinguishing parameters
PUSH FITTINGS INSTA INST LLAT ALLA ION TION AND AND COMPONENTS COMPONENTS
PUSH FITTINGS INSTALLATION AND COMPONENTS SUMMARY 1. USE 1. TECHNICAL DATA 2. INSTALLATION WITH SYNTHETIC PIPES 3. INSTALLATION WITH COPPER PIPES 5. COMPONENTS 9. GUARANTEE June 2010 0135EN ISO 9001 0006/6
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
SYSTEM KAN-therm Push Platinum ISO 9001
SYSTEM KAN-therm Push Platinum ISO 9001 Contents Page System KAN-therm Push Platinum - General information...3 System KAN-therm Push Platinum - Technical information...4 Multi-layer PE-Xc/Al/PE-HD Platinum
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
IRECO FITTINGS IN BRASS SERIES - FOR PLASTIC PIPES FOR ISO PIPES FROM DIAMETER 20 TO 63
11/17 0800 DESCRIPTION The IRECO 800 series compression fittings with EPDM elastomer ring washer have been conceived, designed and manufactured for plastic piping used for transporting fluids under pressure.
SINGLE MANIFOLDS TECHNICAL DATA SHEET10/ ENG
FUNCTION ICMA distribution manifolds are manufactured starting from a special profile of brass bar drawn into CW617-N. They can be divided into: Distribution manifolds with or without connection fittings
Shell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
TECHNICAL CATALOGUE DISTRIBUTION MANIFOLDS
TECHNICAL CATALOGUE DISTRIBUTION TEC ITAP SpA, founded in Lumezzane (Brescia) in 972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing
Max working pressure 10 bar Max working temperature: 120 C Max differential pressure: 1 bar
All the 4 ways valves are designed in a way that it is possible to have the fluid flow and outlet from one single heating body. These valves must be installed on the bottom connection. The purpose of the
ACCESSORI POMPE E MOTORI PUMPS AND MOTORS ACCESSORIES
SUPPORTS GROUP SUPPORTS GROUP SUPPORTS GROUP RACCORDI CONNECTORS 1 2 3 MANICOTTI DI TRASCINAMENTO MALES COUPLING Pag. Page D-2 D-3 D-5 D-6 D-8 D-1 -0.060 17.5 M12X1.5-0.060 M6 0-0.011 SUPPORTS GROUP 1
Compression Fittings TR - TP 23/03/2018. Technical Data Sheet
Technical Data Sheet Compression Fittings TR - TP 23/03/2018 Function Luxor manufactures a wide range of compression fittings to fit all types of installation. This includes fittings for copper (or mild
Catalogue technical information
Modern water and heating solutions SYSTEM KAN therm Catalogue technical information Steel and Inox Underfloor heating TECHNOLOGY OF SUCCESS ISO 9001 Contents Page SYSTEM KAN-therm Push/Push Platinum...1
RBM TITA-FIX SYSTEM MULTI-LAYER PIPE AND FITTINGS FOR WATER DISTRIBUTION
COIL COIL COIL STRAIGHT LENGTH COIL RBM TITA-FIX SYSTEM MULTI-LAYER PIPE AND FITTINGS FOR WATER DISTRIBUTION CT068.0_7 EN September 07 * PE-Xc PE-RT * PRODUCTION RANGE RBM TITA-FIX MULTI-LAYER PIPE External
INTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
LIQUIDLINE PROGRAM. Connections for cooling water. dezincification-resistant brass. Messing. aluminium.
LIQUIDLINE PROGRAM Connections for cooling water dezincification-resistant brass Messing aluminium stainless steel 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents,
TA-6-way valve. Standard control valves 6-way valve for change-over systems
TA-6-way valve Standard control valves 6-way valve for change-over systems IMI TA / Control valves and Actuators / TA-6-way valve TA-6-way valve The 6-way valve solution enables various control set-ups
80% Max working pressure: Max working temperature: 70 C. Flow-meter regulation range: Flow meter-regulation range: ± 10%
Luxor s distribution manifolds are from brass bar CW617N. The manifolds are tooled and produced with fully automated machineries and tested when complete with their accessories to guarantee their absolute
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
Irrigation. Irrigazione. Irrigazione. Price List TO-S
Irrigation Irrigation Irrigazione Irrigazione Price List TO-S112-2013 1 Index - Indice Pag Small Fittings Piccola raccorderia 3 Poly drip line fittings Raccorderia per ala gocciolante 4 Tape fittings with
BUN: 3-way valve with male thread, PN 16
Product data sheet 7.1 56.101 BUN: 3-way valve with male thread, PN 16 How energy efficiency is improved Reliable actuation in efficient control systems Features Regulating valve free of silicone grease
DN 1/4" to 4 Female - Female BSP -10 C + 80 C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4 Female - Female BSP -10 C + 80 C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore Materials :
savings flexibility recyclable LIGHTNESS FULL FLOW MECHANICAL STRENGTH IMPROVE CONTROL TECHNICAL BROCHURE aesthetic performance CHANGE
TECHNICAL BROCHURE aesthetic performance flexibility thermal comfort PREMIUM QUALITY MECHANICAL STRENGTH IMPROVE CHANGE LIGHTNESS savings high resistance to corrosion low and high temperature systems FULL
Dynacon. Floor Heating Manifolds Floor heating manifold with automatic flow control
Dynacon Automatic Flow Control Floor Heating Manifolds Floor heating manifold with automatic flow control IMI HEIMEIER / Floor Heating Control / Dynacon Dynacon Dynacon adjusts the flow rate in the individual
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points from 0 to 250 C G ½ to G or DN 5 to DN
Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
INTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
PRODUCT CATALOGUE EFFECTIVE FROM 1 ST JANUARY 2013 MULTI-LAYER PIPE & PRESS FITTING SYSTEM
PRODUCT CATALOGUE EFFECTIVE FROM 1 ST JANUARY 2013 MULTI-LAYER PIPE & PRESS FITTING SYSTEM PRESSTITE INTRODUCTION Introduction to Presstite Presstite Multilayer is a composite pipe system using the advantages
Piston rod attachments
Piston rod attachments Co-ordinated with Festo s cylinder range Versatile combinations Sturdy and functional Stainless steel variants 2012/09 Subject to change Internet: www.festo.com/catalogue/... 1 Piston
PLUMBING SYSTEMS PIPE & FITTINGS
PIPE & FITTINGS MLCP MultiLayer Pipe & Fittings Our MLCP product offering By combining PE-RT and aluminium, a new technologically advanced material is formed, providing security and safety. Our Multitubo
Tubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings
Tubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings Produced in food grade chrome plated brass, these 1/8 flow size couplings are more durable and withstand higher pressures. They are available
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2
BORNEBUSCH. Non-ferrous metals. Stock list and material list for cast bronzes and other non-ferrous metals
Non-ferrous metals Stock list and material list for cast bronzes and other non-ferrous metals 30 Non-ferrous metals BORNEBUSCH Table of contents 1. Red bronze (CuSn7ZnPb) 32 1.1 Pipes 33 1.2 Round rods
Hot and Cold Plumbing Manifold Systems
Hot and Cold Plumbing Manifold Systems Hot and Cold Manifold Overview By using an Emmeti manifold system in a point to point plumbing configuration you can greatly reduce the number of joints in your system,
502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
Funzione, regolazione sicurezza. Function, regulation and safe
Funzione, regolazione e e sicurezza n an sa Function, regulation and safe Indice / Index / Function, regulation and safe / Flow regulators METAL series / Flow regulators EASY series / Flow regulators POLYMER
CATALOGUE. Metzerplas
CATALOGUE Metzerplas C E R T I F I C A T I O N 3 SP pipe is approved by standards institutes around the world Institute Certificate No. Product Standard Country IAPMO 4755 Pex-Al-Pex Composite pressure
Valves. Valves Range 1340 Double Check Valves PN16. Material Specification
Valves Range 1340 Double Check Valves PN16 Material Specification 1340-1/2" - 2" No Component Material Specification 1 Body DZR Brass BS EN 12164 CW602N 2 Check Spool Acetal Acetal 3 Retaining Ring Nylon
KAN-therm Inox System technical information, catalogue
4 KAN-therm Inox System technical information, catalogue ISO 9001 : 2000 Copyright KAN Sp. z o.o. All rights reserved. Copyrights include texts, pictures and their lay-out in KAN Sp. z o.o. publications.
Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
CombiTemp Temperature Measuring System
CombiTemp Temperature Measuring ystem Flexible building block concept All wetted parts in acid-proof, stainless steel ome hygienic connections conform to -A standards, FDA demands and EHEDG guidelines
N, N4. End-Suction Centrifugal Pumps standardized EN 733
, Construction Single-stage end-suction centrifugal pumps, with bearing bracket. ominal duty points and main dimensions in accordance with E 7. Back Pull-Out construction, for simple and quick dismantling
Cylinders ISO 6431 VDMA
Cylinders ISO 431 VDMA Compliant to norm ISO 431 VDMA High reliability and long lifetime Standard magnetic version With square profile (N series) or easy profile (E series) Special versions and strokes
PLUMBING SYSTEMS PIPE & FITTINGS
PIPE & FITTINGS MLCP MultiLayer Pipe & Fittings By combining PE-RT and aluminium, a new technologically advanced material is formed, providing security and safety. Our Multitubo systems MLCP is designed
Ball Valves with Electrical Actuator Screw-on and Flange Connection, Weld Ends
Ball Valves with lectrical Actuator Screw-on and Flange onnection, Weld nds measuring monitoring analysing pmax. PN 6 tmax. +60 onnections: screw thread / to / weld ends 5 to 50 flanges 5 to 50 V D, 30
ADJUSTMENT CODIFICATION VALUES: TYPE M68/40 M68/40 M68/40. Office: Factory:
ONE PIPE VALVE M 68/40 (TKM) M 68/40 ADJUSTMENT CODIFICATION VALUES: A = 20% circuit vol. water flow B = 35% C = 50% D = 60% E = 75% F = 90% G =100% L 2000 Model: M 68/40 Characteristics: One pipe lateral
WORKING PRESSURE: the most common case for compressed-air pipliens pressure is 7 bar.
The measuring of compressed air pipeline can be done in differetn ways. We suggest an example of calculation where we fix a total pressure drop of the installation at 4%. To determinate the diameter of
Compression Fittings. Serie 50th 01/03/2018. Technical Data Sheet
Technical Data Sheet Compression Fittings Serie 50th 01/03/2018 Function The Serie 50th range of compression fittings was created to fit all types of installation of Serie 50 th and Serie 30 valves. They
ENERGIE DI GRUPPO ENERGIES OF A GROUP
ENERGIE DI GRUPPO ENERGIES OF A GROUP Only excellence allows to compete in the international market. The challenge can be faced thanks the passion and the energy of the researchers, who plans and manufactures
LP Spare parts list. Duplex roller. s/n BGF Engine: Hatz 1D Construction Tools EOOD No
LP 6505 Spare parts list Duplex roller s/n BGF000001- Engine: Hatz 1D 42 2015 Construction Tools EOOD No. 9800163701 2015-07 F1700C Spare parts list General information This spare parts list applies to
ROTEX VA : Aluminium compound. The installation system for domestic and heating application.
ROTEX VA : Aluminium compound. ROTEX VA : The installation system for domestic and heating application. Plastics technology in the future - safe, clean, fast. The ROTEX VA - installation system ROTEX VA
Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30)
Shipbuilding OSNA -10 and OSNA -30 Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30) KME Germany GmbH & Co. KG Shipbuilding - OSNA -10 and OSNA -30 [EN] Content KME - The Company
Discipline Chemical Testing Issue Date Certificate Number T-3037 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. AIR, GASES & ATMOSPHERE 1. Ambient Air Quality Monitoring Respirable Suspended Particulate Matter Less than 10µm or PM10 IS:5182 (Part 23):2006 5-1000 µg/m3 Respirable
BROEN QUICK CONNECT FOR 5.0 GASES
BROEN QUICK CONNECT FOR 5.0 GASES LAB FITTINGS Table of contents Table of Contents 2 Advantages 2 Product Range 3 Outlets 4 Technical Specifications 5 Accessories 5 Mounting Information 6-7 Advantages
MOTORISED BALL VALVE. Uni/Bi-directional. patented. 3 points 2 points Price list root SR... SS... SY... Connection with ball valve.
USE motorised ball valve can be used in the interception and regulation of: zoned heating/cooling systems water plants, with suitable ball valve alternative energy plants solar thermal plants general automation
STAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
Threaded fittings. Festo core product range Covers 80% of your automation tasks
Threaded fittings q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
MrPEX 1 ¼ Stainless Steel Manifold. Installation Guide
MrPEX 1 ¼ Stainless Steel Manifold Installation Guide Design MrPEX 1 ¼ Stainless Steel Manifold is made from high quality stainless steel, and is offered in 2 through 12 loop configurations. The manifold
BASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
Technical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire
SELF-CLEANING FILTER
SELF-CLEANING FILTER CT0126.0_00 UK November 2008 PRODUCTION RANGE Connections Standard Mesh [μm] Size Code Kv [m³/h] THREADED FF UNI-EN-ISO 228 100 3/8 126.03.10 1,80 1/2 126.04.10 3,10 3/4 126.05.10
SYSTEM KAN-therm. Underfloor heating. Comfort and efficiency TECHNOLOGY OF SUCCESS ISO 9001
SYSTEM KAN-therm Underfloor heating Comfort and efficiency TECHNOLOGY OF SUCCESS ISO 9001 The underfloor heating of System KAN-therm - pipes and pipe accessories KAN-therm pipe PE-RT with EVOH layer for
Poly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
MARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
A E R OFLEX - SK, ltd. PIPELINE & INSULATION SYSTEMS
A E R OFLEX - SK, ltd. PIPELINE & INSULATION SYSTEMS THE UNIQUE CONNECTION OF SOLAR COLLECTORS AND HEAT PUMPS FLEXIBLE PRE-ISULATED STAINLESS STEEL PIPELINE SYSTEM RESISTENT AGAINST HIGH TEMPERATURE, UV
Cross Linked MLCP Press & Compression Fittings Tooling
Engineered Water Solutions GERPEX Multi-Layer Composite Pipe & Press Fit System Cross Linked MLCP Press & Compression Fittings Tooling www.emmeti.co.uk Company Overview The Group Our parent company Emmeti
TECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
Standard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
TECHNICAL SPECIFICATIONS 63/2E DN15 Kvmax /4"E. ( 3 4"x18) 3/4"E
DESCRIPTION 63/2E Six-way ballvalve with ¾ M eurocone ends for HVAC 4 pipes applications to automatically carry out the winter-summer change-over or, potentially, the control of radiant ceilings, fan coils
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
Ballorex Vario. Description. Versions. Benefits. Applications. Balancing
Ballorex Vario Description Ballorex Vario is a variable orifice double regulating valve for balancing water-based heating and cooling systems. The balancing performed ensures the required distribution
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1200AD/E 01 2004 SINGLE SEAT TWO WAYS PED 97/23/CE Art.3 Section 3 TYPE 1200 AD Normally open Air closes DESCRIPTION The 1200 HYGIENIC pneumatic control valves are with
D 40 ALUMINIUM (CLAMPED)
www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start
Hydraulic kit and accessories for tractor trucks
Hydraulic kit and accessories for tractor trucks pag.1 EXAMPLE DIAGRAMS Tipping valve fi tted onto tank with or without return fi lter Tipping valve fi tted onto the chassis with or without return fi lter
General page 3-8. Mounting instructions page Couplings DN6 page Couplings DN7 page Couplings DN8 page 27 34
Table of contents General page 3-8 Mounting instructions page 9-12 DILO couplings for SF 6 -switchgear page 13-54 Couplings DN6 page 13-20 Couplings DN7 page 21-26 Couplings DN8 page 27 34 Couplings DN12
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
+91-8048078009 Kanti Enterprises http://www.kantienterprises.in/ We are amongst the leading Manufacturers, Exporters and Suppliers of this impeccable range of Products like Pipes & Tubes, Flanges, Pipe
SOLUTIONS GUIDE. For total efficiency
2014-2015 SOLUTIONS GUIDE For tal efficiency THERMOSTATISABLE, FIXED KV, ANGLE WITH MANUAL HANDWHEEL 808CMJ Left or right mounted angle, M28-head TIP EXAMPLES OF 1-PIPE INSTALLATIONS Standard 1-pipe installation
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
VCL : 2-way regulating valve for dynamic hydronic balancing, PN 16, Valveco
Product data sheet 6.1 57.001 VCL 010 032: 2-way regulating valve for dynamic hydronic balancing, PN 16, Valveco How energy efficiency is improved Automatic dynamic hydronic balancing with the SAUTER Valveco
D 25 POLYPROPYLENE (BOLTED)
www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start
Elbow ball check valves PRODUCT CATALOG
Elbow ball check valves PRODUCT CATAOG Version 01.16 Technical data Range of available diameters: 32 300. Pressure rated to PN 1.6 MPa (all valves are tested to PN 1.0 MPa leak test / PN 1.6 MPa hydrostatic
Envirochem Testing Lab & Research Centre, Plot No. 165, Sector-25, Part-II, HUDA, Panipat, Haryana. Discipline Chemical Testing Issue Date
Last Amended on - Page 1 of 5 I. WATER 1. Potable / Drinking Temperature IS 3025 (Part 9): 1984 (RA 2006) Ambient - 50 C Turbidity IS 3025 (Part 10): 1984 (RA 2006) 1 NTU to 100 NTU Specific Conductivity
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
HYDRA DUO. multi-stage self-cleaning filters
SELF-CLEANING FILTERS HYDRA DUO andtrio multi-stage self-cleaning filters Exclusive multi-stage filters with self-cleaning pre-filter, for dual and triple stage water filtration and treatment 169 multi-stage
IS 3.5 SN (001995) FIG. 1 / 4
motore engine IS 3.5 SN (001995) FIG. 1 / 4 1 024406-0 1 Motore Yanmar L.70N Yanmar engine L 70N 2 1 Filtro olio motore Engine oil filter 3 62497 1 Staffa supporto motore Support bracket engine 4 011391
Mikrotherm F. Manual Radiator Valves With presetting
Mikrotherm F Manual Radiator Valves With presetting IMI HEIMEIER / Thermostatic Heads & Radiator Valves / Mikrotherm F Mikrotherm F The Mikrotherm F manual radiator valve is used in warm water pump heating
HYDRA BACK TO INDEX. HYDRA and HYDRA K can be used with KIT AUTO and work as a fully automatic self-cleaning filter with back-wash.
SELF-LENING FILTERS HYDR HYDR is a full range of self-cleaning filters with innovative solutions for the efficiency of self-cleaning operation, thanks to a ly designed back-wash system in counter-current