ADJUSTMENT CODIFICATION VALUES: TYPE M68/40 M68/40 M68/40. Office: Factory:

Transcription

1 ONE PIPE VALVE M 68/40 (TKM) M 68/40 ADJUSTMENT CODIFICATION VALUES: A = 20% circuit vol. water flow B = 35% C = 50% D = 60% E = 75% F = 90% G =100% L 2000 Model: M 68/40 Characteristics: One pipe lateral or central valve for 4 ways with vertical connections. Pre adjustment from 0 to 100 % of the circuit volume water flow to the radiator. Advantages: Forth/back interchangeable. Total closed up, enabling to dismantle the radiator without draining the circuit. Material: brass drop forging, following the regulation of UNE E EN Surface: nickel plated. Pressure tested: 8 Kg/cm 2 Handwheel: Makralon Notice: Piping outflow floor valve. (copper, multi layer or polyethylene) VALVES TYPE M68/40 HYDRAULIC HEAD TABLE FOR TKM (MODEL M 68/40) IN METRES Ø 16/18 REGULATION IN % ,7 4,7 6,7 7,9 10, M68/80 3,7 4,7 6,7 7,9 10, M68/60 2,3 3,7 5,3 6,4 9, M68/40 14/16 2,7 3,2 4,6 5,1 6,6 7,8 8,3 M68/80 2,7 3,2 4,6 5,1 6,6 7,8 8,3 M68/60 1,8 2,6 4,0 4,5 5,8 6,9 7,4 M68/40 13/15 1,6 2,0 2,7 3,1 4,2 5,7 6,1 M68/80 1,6 2,0 2,7 3,1 4,2 5,7 6,1 M68/60 1,0 1,6 2,3 2,1 3,5 4,9 5,3 ELBOW Notice: In these figures the two curves needed to connect the pipes to the valve are considered. T 0,6 0,9 0,5 0,8 0,5 0,8

2 ONE PIPE VALVE M 68/60 (TKM) ML 68/60 ADJUSTMENT CODIFICATION VALUES: A = 20% circuit vol. water flow B = 35% C = 50% D = 60% E = 75% F = 90% G =100% L 2000 Model: M 68/60 HYDRAULIC HEAD TABLE FOR TKM (MODEL M 68/60) IN METRES Characteristics: One pipe lateral or central valve for 4 ways with horizontal connections. Pre adjustment from 0 to 100 % of the circuit volume water flow to the radiator. VALVES TYPE M68/40 Ø REGULATION IN % ,7 4,7 6,7 7,9 10, ELBOW T Advantages: Forth/back interchangeable. Total closed up, enabling to dismantle the radiator without draining the circuit. Material: brass drop forging, following the regulation of UNE EN Surface: nickel plated. Pressure tested: 8 Kg/cm 2 Handwheel: Makralon Notice: valve for copper piping viewed. Mostly used for inhabited housings. 16/18 M68/80 3,7 4,7 6,7 7,9 10, M68/60 2,3 3,7 5,3 6,4 9, M68/40 14/16 2,7 3,2 4,6 5,1 6,6 7,8 8,3 M68/80 2,7 3,2 4,6 5,1 6,6 7,8 8,3 M68/60 1,8 2,6 4,0 4,5 5,8 6,9 7,4 M68/40 13/15 1,6 2,0 2,7 3,1 4,2 5,7 6,1 M68/80 1,6 2,0 2,7 3,1 4,2 5,7 6,1 M68/60 1,0 1,6 2,3 2,1 3,5 4,9 5,3 Notice: In these figures the two curves needed to connect the pipes to the valve are considered. 0,6 0,9 0,5 0,8 0,5 0,8

3 ONE PIPE VALVE M 68/80 (TKM) M 68/80 ADJUSTMENT CODIFICATION VALUES: A = 20% circuit vol. water flow B = 35% C = 50% D = 60% E = 75% F = 90% G =100% L 2000 Modelo: M 68/80 Characteristics: One pipe lateral or central valve for 4 ways with square connections. Pre adjustment from 0 to 100 % of the circuit volume water flow to the radiator. Advantages: Forth/back interchangeable. Total closed up, enabling to dismantle the radiator without draining the circuit. Material: brass drop forging, following the regulation of UNE EN Surface: nickel plated. Pressure tested: 8 Kg/cm 2 Handwheel: Makralon Notice: valve for wall outflow piping (copper, multi layer or polyethylene) VALVES TYPE M68/40 HYDRAULIC HEAD TABLE FOR TKM (MODEL M 68/80) IN METRES Ø 16/18 REGULATION IN % ,7 4,7 6,7 7,9 10, M68/80 3,7 4,7 6,7 7,9 10, M68/60 2,3 3,7 5,3 6,4 9, M68/40 14/16 2,7 3,2 4,6 5,1 6,6 7,8 8,3 M68/80 2,7 3,2 4,6 5,1 6,6 7,8 8,3 M68/60 1,8 2,6 4,0 4,5 5,8 6,9 7,4 M68/40 13/15 1,6 2,0 2,7 3,1 4,2 5,7 6,1 M68/80 1,6 2,0 2,7 3,1 4,2 5,7 6,1 M68/60 1,0 1,6 2,3 2,1 3,5 4,9 5,3 ELBOW Notice: In these figures the two curves needed to connect the pipes to the valve are considered. T 0,6 0,9 0,5 0,8 0,5 0,8

4 TKM UNIVERSAL ONE PIPE LAT TERAL M Model: One pipe valve, 4 ways with manual adjustment. Characteristics: mixer valve with pre adjustment from 0 to 100% of the water flow volume to the radiator. When the valve is in closed position it is possible to dismantle the radiator without draining the circuit. Material: brass drop forging, following the regulation of DIN Surface: nickel plated. Watertightness: Equipped by O ring seals and teflon cylinder seal. Pressure tested : 9 Kg/cm 2 Handwheel: Makralon. Connections: compression unions with annealed bi cones or elastic rubbed bi cones. Internal protector valve O ring seals leak proof between the valve and the injector O ring seals leak proof to the radiator. 35 mm 95 mm 220 mm Accessories: different piping connections Adjustment codification values: A= 20% circuit vol. water flow B= 35% CD= 50% E= 75% F= 90% G= 100%

5 ONE PIPE TP /86 TP TP One pipe thermostatic or manual valve for different kind of radiators. (Runtal type, towel rail design, aluminum and cast iron.) Model: TP /R or DR: Vertical (floor). TP /R or DR: Square (wall). R= Volume water flow regulator to the radiator. DR= Volume water flow regulator to the radiator, and control mechanism regulator to the readjustment of circuit balance. Characteristics: One pipe valve, with volume water flow regulation to the radiator and a lock shield valve incorporated, enabling to dismantle without draining the installation. Advantages: back forth interchangeable. This model can be equipped with three different kind (brand) of thermostatic heads. : DANFOSS = RAS C2 OVENTROP = UNI LD HEIMEIER = thermostat koft.vk Material: brass drop forging, following the regulation of UNE ENN Surface: nickel plated Pressure tested : 8 Kg/cm 2 Handwheel : Makralon Watertightness: Rubber band incorporated between the valves union and the adaptor. Connections: for copper pipes, polyethylene, and multi layer. Adaptors: L 1000: Long vertical adaptor for radiators towel rail designs. L 100: Short vertical adaptor for radiators runtal. L 2000: Square adaptor for aluminum or cast iron radiators.

6 TWO PIPE RA 2000/2100 RA 2000 RA 2100 Two pipe thermostatic or manual valve for different kind of radiators. (Runtal type, towel rail design, aluminum and cast iron. L 1000 With protection Model: RA 2000: floor piping (vertical) RA 2100: wall piping (square) Characteristics: Two pipe valve, with a volume water flow regulator to the radiator, enabling to dismantle the radiator without draining the installation circuit. L 2000 Manual Material: brasss drop forging, following the regulation of UNE EN Surface: nickel plated Pressure tested: 8 Kg/cm 2 Handwheel: Makralon Thermostatic DANFOSS Watertightness: Rubber band incorporated between the valves and the adaptor. Connections: for copper pipes, polyethylene, and multi layer. Adaptors: L 1000: Long vertical adaptor for radiators towel rail designs. L 100: Short vertical adaptor for radiators runtal. L 2000: Square adaptor for aluminum or cast iron radiators.

7 CT 05 28/0 HYDRO TWO PIPE VALVE The Hydrocable is a radiator control valve that is similar in operation to a conventional Two Pipe Heating System with the Flow/Return separation provided within the valve body itself. This uniquely neat and effective method offers the advantage of a user friendly fixed distance between the pipe work centers, irrespective of radiator length, with the flow connection concealed discreetly behind the radiator. It is suitable for all makes of radiator with ½ connections. The valve body is designed to rotate to suit all installation pipe work possibilities from floor to walll terminations with connections available to easily attach to Polyethylene (plastic) piping 12mm and 16 mm. It is also available in 12x10, 16x12 sizes for fixing to multilayer (Plastic Aluminium) pipe work methods. The valve provides Flow and Return isolation to enable easy radiator dismounting. It is supplied as standard with a manual hand wheel that may be exchanged to accommodate Danfoss, Heimeier or Oventrop thermostatic sensors. The valve thermostatic insert has an integral flow balancing facility settable in seconds to regulate the desired flow capacity to match energy requirements. The Hydrocable Valve is unmatched in style, easy of installation, technical reliability and performance to satisfy Material: today s discerning Estampació customer ón en caliente demands for latón, energy según efficient norma and UNE EN smart installations Technical Data Tratamiento superficie: Niquelado Radiator Connections Size ½ Presión Regulation de Presetting prueba: 8 Kg/cm (Liters 2 per hour) Volante: Position Makralon Position Estanqueidad: Position Juntas caucho entre radiador Position y 4 Kit Position Conexiones: Position Tubo polietileno Ø12, Ø16 y Position ½ conexión al radiador Position N

8 CT 05 30/0 HYDRO TWO PIPE VALVE Kits for simple panel radiator SM Model : Handle hydro Kit manual for simple radiator 10/12 and 13/16 Sliding tip connection ½ thread connection Ø16 M22 thread connection ST Model : Kit thermostatic hydro for simple radiator 10/12 and 13/16 Sliding tip connection ½ thread connection Ø16 M22 thread connection

9 CT 05 29/0 HYDRO TWO PIPE VALVE Kits for double radiator or triple panel DM Model : Handle hydro kit for double or triple panel 10/12 and 13/16 Sliding tip connection ½ thread connection Ø16 M22 thread connection DT Model : Kit thermostatic hydro for double or triple radiator 10/12 and 13/16 Sliding tip connection ½ thread connection Ø16 M22 thread connection

10 MECANO TWO PIPE VALVE Double kit Simple kit Manual Two pipe valve, thermostatic or manual for radiators, aluminum, cast iron and steel panel types. Model: Simple KIT: Radiators made by aluminum, cast iron and steel panel types. Manual Return Double KIT: Radiators with double panel only. Characteristics: Two pipe and a lock shield valve incorporated to regulate or close the volume of water flow to the radiator, enabling to dismantle the radiator withoutt draining the installation. Advantages: Easy and quick valve installation, in square position (wall) or vertical (floor) enabling to do the assembly in both sides varying the height and relative e distance to the wall or floor. Return Material: brass drop forging, following the regulation of UNE EN Thermostatic Surface: nickel plated Pressure tested: 8 Kg/cm 2 Handwheel: Makralon Watertighness: rubber band between the kit and the radiator. Connections: forr copper pipes, polyethylene, or multi layer in different diameters.

11 ONE OR TWO PIPE TKM & TP3 THERM MOSTATIC OR MANUAL VALVES FOR STEEL PANEL RADIATORS AND TP3 ALUMINIUM. VERTICAL OR SQUARE MODEL.

12 ONE OR TWO LATERAL PIPE THER RMOSTATIC OR MANUAL VALVES Thermostatic one pipe valve Under floor heating Lateral one pipe valve Lateral one pipe valve Mod. Euro B, two pipe (square) Mod. Euro B, (vertical)

13 CT 05 32/1 EURO.B Model: EURO.B Two pipe valve, thermostatic orr manual with thermostatic element Oventrop. Characteristics: Two pipe valve with volume water flow regulation to the radiator and a lock shield valve incorporated, enabling to dismantle without draining the installation. Advantages: With the same valve the installation could be in square position (wall) or vertical (floor). Material: Brasss drop forging, following the regulation of UNE EN Surface: Nickel plated Pressure tested: 8 Kg/cm 2 Connections: For copper pipes, polyethylene, or multi layer in different diameters. Handwheel: Makralon Watertightness: Rubber band between the kit and the radiator or adaptator.

14 CT 05 31/1 TP.4000 ONE OR TWO PIPE Model: TP.4000 Thermostatic or manual valve for one or two pipe installations. Characteristics: Volume water flow regulation to the radiator with by pass (one pipe), without by pass (two pipes). Control mechanism regulator to readjustment of circuit balance. Lock shield valve incorporated, enabling to dismantle it without draining the installation. Advantages: Back forth interchangeable. With the same valve the installation could be in square position (wall) or vertical (floor), both to left and right hands. Material: Brass drop forging, following the regulation of UNE EN Surface: Nickel plated. Circuit balance By pass Pressure tested: 8 Kg/cm 2 Handwheel: Makralon Watertightness : Rubber band between the kit and the radiator or adaptator. Connections: For copper pipes, polyethylene, or multi layer in different diameters.

15 UNDERFLOOR HEATING VALVE TP 3000/3001 TP 3000 (M22) Ø16 TP 3001 (Ø 3/4) Independent control valve, allows to choose the temperature in different rooms. Polyethylene connection Multi layer connection Plastic protector box, with level, and an assembly strip, with a plastic protector to open or close manually.

16 ACCESSORIES MULTILAYER Group of accessories and raccords in brass nickel plated for multilayer tubes in different versions (Male Female) and different diameters. Ref: R002 Raccord M M22 H1/2 (Ø16) Multilayer tube TWIN PIPE with sheating included in different tubes (One or Two pipe) (back and return) in the same coil. Ref: R023 Raccord M M22 M1/2 (Ø16) Ref: R026 Ref: SE16 Raccord M 3/8 M M22 (Ø16) (P + B + T) M22 Ø16 Ref: R025 Ref: SE18 Raccord M M22 M M22 (Ø16) (P + B + T) M24 Ø18 Ref: R030 Raccord M M22 H3/8 (Ø16)

17 CT 05 13/1 SPECIAL TKM CONNECTION TKM connection to be used with standard steel panel radiators allowing the radiator connection to be placed in the centre, on the right or left hand side of the radiator for one and two pipe heating systems. For new installations and for replacements of TKM radiators in existing installations without changing the tubing. Centro middle left right

18 ACCESSORIES AND RACCORDS (POL LYTUBE) FOR MULTILAYER TUBES Ref.: R057 ½ Ref.: R067 ½ Wall H T Ref.: R058 ½ Ref.: R059 ¾ Ref.: R063 ½ Ref.: R064 ¾ Ref.: R068 ½ Male T Male curve Double union Ref.: R060 ½ Ref.: R061 ¾ Ref.: R065 ½ Ref.: R066 ¾ Ref.: R069 ½ Ref.: R070 ¾ Female T femalee curve Male union Ref.: R062 ½ Ref.: R071 ½ Ref.: R072 ¾ double curve Female union