Please refer to our catalogue for details of the full product range

Transcription

1 Thermostatic Radiator Valve Bodies Series V6 - Double Regulating Function ngle Pattern EPDM disk & seals (see note below) F x MU ends Thermostat connection thread M30 x 1.5 Reverse ngle Pattern Double ngle - left Double ngle - right Certified to EN215 djustable Kv Kv (@ 2K P-Deviation) Setting 6 = Setting 5 = Setting 4 = Setting 3 = Setting 2 = Setting 1 = Note: Mineral oils, including thread cutting oils/greases, will have an adverse effect on any EPDM components, such as valve seals, pump seals and flexible connections, in a pipework system. Therefore it is essential that pipework systems are thoroughly cleaned of any residues, and that the use of water treatments containing mineral oils is avoided. Presetting key for V6 & DV For Compression fittings to suit, see page 6 Series DV6 - Double Regulating & nti-vandal Functions* ngle Pattern F x MU ends. EPDM disk & seals (see note above) Thermostat connection thread M30 x 1.5 Certified to EN Pumped 2 pipe systems Presetting key for V6 & DV djustable Kv Kv (@ 2K P-Deviation ) Setting 6 = Setting 5 = Setting 4 = Setting 3 = Setting 2 = Setting 1 = * Valve closes to a 5% frost setting if the thermostat is removed. For Compression fittings to suit, see page 6 1

2 Thermostatic Radiator Valve Bodies Series ngle Pattern EPDM disk & seals (see note below) F x MU ends Thermostat connection thread M30 x Certified to EN215 Kv = 0.95 (@ 2K P-Deviation ) Reverse ngle Pattern Double ngle - left Note: Mineral oils, including thread cutting oils/greases, will have an adverse effect on any EPDM components, such as valve seals, pump seals and flexible connections, in a pipework system. Therefore it is essential that pipework systems are thoroughly cleaned of any residues, and that the use of water treatments containing mineral oils is avoided. Double ngle - right For Compression fittings to suit, see page 6 Series Z - High Capacity for 1 & 2 Pipe Systems ngle Pattern DN25 DN EPDM disk & seals (see note above) F x MU ends Thermostat connection thread M30 x 1.5 Certified to EN215 DN25 DN32 Reverse ngle Pattern* Note * - Reverse angle pattern not recommended for TBOE connection on 1 pipe systems Kv =1.1 (@ 2K P-Deviation ) Kvs : = = = = = = = = = = 2.1 For Compression fittings to suit, see page 6 2

3 Thermostatic Radiator Valve Bodies Series F - Ultra Low Flow & District Heating Systems ngle Pattern Bronze / brass body, nickel plated EPDM disk & seals ( see note below) F x MU ends. Thermostat connection thread M30 x Infinitely adjustable Kv Kv (@ 2K P-Deviation ) = Reverse ngle Pattern For Compression fittings to suit, see page 6 Presetting tool for Series F Special pplication Thermostatic Radiator Valve Bodies Reverse Flow Valve. For fitting in the return pipe. Reverse ngle Pattern EPDM disk & seals (see note below) F x MU ends Thermostat connection thread M30 x Series - Series Series - Series Reverse ngle Pattern - Series V6 - Series V Note: Mineral oils, including thread cutting oils/greases, will have an adverse effect on any EPDM components, such as valve seals, pump seals and flexible connections, in a pipework system. Therefore it is essential that pipework systems are thoroughly cleaned of any residues, and that the use of water treatments containing mineral oils is avoided. - Series V6 - Series V For Compression fittings to suit, see page 6 Three-way Bypass Valve up to 40% radiator share. - Left handed (shown) Right handed (not shown)

4 Exclusive Design ward Radiator Valves Series E - Exclusive Thermostatic Radiator Valve Bodies ngle Pattern - nthracite - Nickel* - Chrome - White - Gold - nthracite - Nickel* - Chrome - White - Gold Reverse ngle Pattern - nthracite - Chrome - White Brass body, Elegant design with a choice of highly polished finishes * (Nickel plated versions are sand blasted satin finish) EPDM disk & seals (see note below) F x MU ends Thermostat connection thread M30 x 1.5 djustable Kv Kv (@ 2k P-Deviation) Setting 6 = Setting 5 = Setting 4 = Setting 3 = Setting 2 = Setting 1 = Double ngle - Left - nthracite - Chrome - White Double ngle - Right - nthracite - Chrome - White Note: Mineral oils, including thread cutting oils/greases, will have an adverse effect on any EPDM components, such as valve seals, pump seals and flexible connections, in a pipework system. Therefore it is essential that pipework systems are thoroughly cleaned of any residues, and that the use of water treatments containing mineral oils is avoided. For "Exclusive" special compression fitting sets refer to page 6 Presetting key for Series E Combi E - Exclusive Radiator Lockshield Valves ngle Pattern - nthracite - Nickel* - Chrome - White - Gold Brass body, Elegant design with a choice of highly polished finishes * (Nickel plated versions are sand blasted satin finish) F x MU ends - nthracite - Nickel* - Chrome - White - Gold For "Exclusive" special compression fitting sets refer to page 6 4

5 Thermostatic Radiator Valves - Bi-directional Combi 3G Radiator Lockshield Valve Manual Radiator Valves Uniset & Uniset Pro Thermostatic Radiator Valves Uniset - Bi-directional Valve with wax (Uni DGH) thermostat 10mm x ½" BSP tail 15mm x ½" BSP tail Complete Thermostatic Radiator Valve, consisting of Series G angle pattern nickel plated valve body, having compression x ½" BSP union tail reversible ends, and direct acting thermostat in white. To suit copper pipe only Uniset Pro - Bi-directional Valve with liquid (Uni LGH) thermostat 10mm x ½" BSP tail 15mm x ½" BSP tail Fully bi-directional Certified to EN215 Series G valve body only 10mm x ½" BSP tail 15mm x ½" BSP tail Note: For other suitable thermostats and accessories, see Combi 3G - Radiator Lockshield Valve - Compression ended Combi 3G 10mm x ½" BSP tail 15mm x ½" BSP tail ngle pattern nickel plated body having compression x ½" BSP union tail To suit copper pipe only Pumped 2 pipe systems Service tool - to fill & drain functions - Isolating, Regulating, Filling/Draining. Manual Radiator Valves Series HRV - Double Regulating ngle Pattern EPDM disk & seals (see note below) White handwheel F x MU ends. Pumped 2 pipe systems Suitable for later conversion to thermostatic operation. For Compression fittings to suit, see page 6. Series H ngle Pattern DN Note: Mineral oils, including thread cutting oils/greases, will have an adverse effect on any EPDM components, such as valve seals, pump seals and flexible connections, in a pipework system. Therefore it is essential that pipework systems are thoroughly cleaned of any residues, and that the use of water treatments containing mineral oils is avoided. DN

6 Demo-Bloc Service Tool Thermostatic Valve Body Inserts Compression Fittings for Radiator Valves Demo-Bloc Service Tool & Valve Inserts Demo-Bloc Service Tools "Demo-Bloc" Service Tool Coupling set for Series HRV manual valves To suit both M30 x 1.5 and M30 x 1.0 valve bodies. For replacing radiator valve inserts under working conditions - without the need to drain the system Cleaning Head Valve Inserts* For Series V6 valves djustable kv (@ 2K P-Dev) For Series DV6 valves djustable kv (@ 2K P-Dev) nti-vandal function For Series Z valves Kv 1.1 (@ 2K P-Dev) For Series valves Kv 0.95 (@ 2K P-Dev) For Series F valves djustable kv (@ 2K P-Dev) For Series G valves (Bi-directional) Kv 0.45 (@ 2K P-Dev) Insert for steam ( 1 bar max ) Note *: ll inserts can be fitted into all thermostatic radiator valve bodies with M30 x 1.5 body to thermostat connection thread Compression Fittings - For Thermostatic & Lockshield Radiator Valves To suit Table X copper tube ½" x 15mm ¾ x 22mm* Brass, nickel plated compression nut For valves with female thread Note *: Not suitable for soft copper tube To suit Copipe tube 14 x 2mm x ½" Compression Fitting Sets - For Series E & Combi E Exclusive Valves ½" x 12mm Nickel* ½" x 15mm Nickel* Required when fitting "Exclusive" Radiator Valves to copper pipe. ½" x 12mm Chrome ½" x 15mm Chrome ½" x 12mm White ½" x 15mm White Comprises compression nut, olive and body coloured cap to give a smooth finish. Note *: (Nickel plated versions are sand blasted satin finish) ½" x 12mm Gold ½" x 15mm Gold Note: Not suitable for soft copper tube 6

7 Thermostats Uni LGH and Uni LH Liquid Filled Thermostats Direct cting Uni LGH - White (shown) Liquid filled thermostat with connecting thread M30 X 1.5. To suit all Oventrop TRV bodies with M30 x 1.5 thread Uni LH - White (not shown) Uni LGH - with UK style graduations Uni LH - Black (not shown) Uni LH with German style graduations Uni LH - Gold plated (not shown) Uni LH - Chrome plated (not shown) Remote Sensor Uni LH - White - 2m capillary PO PO Range 7-28 o C. With 0' setting (lso available without 0') Hidden security clips allow limiting and locking of temperature Security clip removing tool available, see page 8 Uni LH - White - 5m capillary Uni LH - White - 10m capillary Uni LH - Black - 2m capillary Remote Control Uni LH - White - 2m capillary Uni LH - White - 5m capillary Uni LH - White - 10m capillary Remote Control with separate remote sensor Uni LH - White - 2m capillaries Uni LH - White - 5m capillaries Uni XH Liquid Filled Thermostats Direct cting Uni XH - White (shown) Liquid filled thermostat with connecting thread M30 X 1.5. To suit all Oventrop TRV bodies with M30 x 1.5 thread Uni XHT - Transparent (not shown) Uni XH and Uni XHT have German style graduations Direct cting - nti-vandal Uni XHT is limited to a maximum water temperature of 90 o C Uni XHB - White Uni XHB has an integrated anti tamper and anti vandal facility Remote Sensor Uni XH - White - 2m capillary Uni XH - White - 5m capillary Range 7-28 o C. With 0' setting (lso available without 0') Visible clips allow limiting and locking of temperature. Clips can be removed without the use of a tool. 7

8 Thermostats Thermostat ccessories Uni DGH & Uni DH - Wax Filled Thermostats Direct cting Uni DGH - White (shown) Uni DH - White (not shown) Uni DH - Chrome plated (not shown) PO Wax filled thermostat with connecting thread M30 X 1.5. Range 7-28 o C Uni DGH with UK style graduations Uni DH with German style graduations Remote Sensor Uni DH - White - 2m capillary (not shown) ccessories Security clip removal tool Only available as a pack of 5 pieces nti-theft ring, to fit all thermostats & bodies - White Only available as a pack of 5 pieces Deco-ring - to conceal thermostat / body connection - White Only available as a pack of 5 pieces Reinforcing cap - not lockable - White For Uni LGH, Uni LH Reinforcing cap - lockable - White For Uni LGH, Uni LH Reinforcing cap - not lockable - White For Uni DGH & Uni DG Lockshield cap - White (not shown) For Uni DGH & Uni DG Cover for all patterns of remote sensor - White Only available as a pack of 5 pieces Manual head for all TRV bodies with M30 x 1.5 connection thread - White

9 Radiator Lockshield Valves Combi 4 - Radiator Lockshield Valve (with fill & drain facility) ngle Pattern F X MU ends (other ends available) Pumped 2 pipe systems 4 functions - Isolating, Regulating (with memory), Filling & Draining For Compression fittings to suit, see page 6. Service tool - to fill and drain Combi 2 - Radiator Lockshield Valve (without fill & drain facility) ngle Pattern F X MU ends (other ends available) Pumped 2 pipe systems 2 functions - Isolating, Regulating (without memory) For Compression fittings to suit, see page 6. Combi LR - Radiator Lockshield Valve - Suitable for 1 Pipe Systems ngle Pattern DN25 DN F X MU ends (other ends available) Pumped 2 pipe systems lso suitable for 1 pipe systems due to low resistance DN25 DN functions - Isolating, Regulating (without memory) For Compression fittings to suit, see page 6. Note: In earlier Catalogues and Price Lists, these items were listed as xx and xx respectively. 9

10 Item No. Price / Metre Group Price Information Combi-System Pipes and Fittings Copipe Composition Pipe Copipe Composition Pipe Copipe Composition Pipe Coils Composite pipe - White WRS approved - 14 x 2mm - 100mtr 200mtr Diffusion tight three layer composition pipe: Inner - Crosslinked polyethylene Middle - Butt welded aluminium Outer - Crosslinked polyethylene DN12-16 x 2mm - 100mtr 200mtr Maximum Pressures: o C o C - 20 x 2.5mm - 100mtr 200mtr x 3mm DN25-32 x 3mm metre lengths DN12-16 x 2mm x 2.5mm x 3mm DN25-32 x 3mm DN32-40 x 3.5mm DN40-50 x 4.5mm PO DN50-63 x 6.0mm PO Copipe Composition Pipe Fitted with 4mm thick anti-condensation protection Coils DN12-16 x 2mm x 2.5mm

11 Combi-System Pipes and Fittings Cofit P Press-fittings Cofit P Press-fittings Press x male thread - nickel plated Maximum Pressures: o C o C Press x male thread - unplated 20 x 2.5mm x ¾" 26 x 3mm x ¾" 32 x 3mm x 1" 40 x 3.5mm x 1¼" range of fittings in sizes 50mm (DN40) and 63mm (DN50) are also available. Press x collar nut - unplated (spherical seat) 16 x 2mm x ¾" 20 x 2.5mm x ¾" Press x collar nut - unplated (flat seat & gasket) 16 x 2mm x ¾" 20 x 2.5mm x ¾" 26 x 3mm x 1" 32 x 3mm x 1¼" 40 x 3.5mm x 1¼" Press x female thread - unplated 26 x 3mm x ¾" 32 x 3mm x 1" Press x press coupling 16mm x 16mm 20mm x 20mm 26mm x 26mm 32mm x 32mm 40mm x 40mm mm x 16mm 26mm x 16mm 26mm x 20mm 32mm x 20mm 32mm x 26mm 40mm x 32mm Press x male thread elbow 20 x 2.5mm x ¾" 26 x 3mm x ¾" 32 x 3mm x 1" 40 x 3.5mm x 1¼" Press x female thread elbow 26 x 3mm x ¾" 32 x 3mm x 1" Note: wide range of additional and special application fittings is also available, please refer to our catalogue. 11

12 Combi-System Pipes and Fittings Cofit P Press-fittings Cofit P Press-fittings Press x press elbow 16mm x 16mm 20mm x 20mm 26mm x 26mm 32mm x 32mm 40mm x 40mm o elbow 32mm x32mm 40mm x40mm o elbow Press tee 16 x 16 x 16mm 20 x 20 x 20mm 26 x 26 x 26mm 32 x 32 x 32mm 40 x 40 x 40mm equal tee 20 x 16 x 20mm 26 x 16 x 26mm 26 x 20 x 26mm 32 x 16 x 32mm 32 x 20 x 32mm 32 x 26 x 32mm 40 x 20 x 40mm 40 x 26 x 40mm 40 x 32 x 40mm reduced central port 20 x 20 x 16mm 26 x 26 x 20mm reduced through port 20 x 16 x 16mm 26 x 16 x 20mm 26 x 20 x 20mm 32 x 20 x 26mm 40 x 26 x 32mm reduced central & through ports 16 x 20 x 16mm 20 x 26 x 20mm 26 x 32 x 26mm enlarged central port 20 x ½" x 20mm 26 x ½" x 26mm 32 x ½" x 32mm central port female thread Wall mounted connection 90 o elbow short form - press x female thread long form - press x female thread Note: wide range of additional and special application fittings is also available, please refer to our catalogue. 12

13 Combi-System Pipes and Fittings Cofit S Compression Fittings Cofit S Compression Fittings Compression fitting 14 x 2mm x ½" 14 x 2mm x ¾" 16 x 2mm x ¾" 20 x 2.5mm x ¾" Compression fitting - male thread to suit Oventrop valves with ½" female end(s), and "Copipe". Nickel plated nut Compression fitting - female thread and Eurokonus to suit "Cofit S" fittings below, and Oventrop valves with male threaded ends. Nickel plated nut 14 x 2mm x ¾" 16 x 2mm x ¾" 20 x 2.5mm x ¾" 26 x 3mm x 1" 32 x 3mm x 1¼" With unplated nut Double Nipple ¾" x ¾" 1" x 1" 1¼" x 1¼" 1" x ¾" 1¼" x 1" 1¼" x ¾" Double Nipple - ends to suit fittings Tee piece a x b x c ¾" x ¾" x ¾" 1" x1" x1" 1¼" x 1¼" x 1¼" Tee piece - ends to suit fittings 1" x 1" x ¾" 1" x ¾" x1" 1" x ¾" x ¾" ¾" x 1" x ¾" 1¼" x 1¼" x 1" 1¼" x 1" x 1¼" 1¼" x 1" x 1" 1" x 1¼" x 1" 1¼" x 1¼" x ¾" 1¼" x ¾" x 1¼" 1¼" x ¾" x ¾" ¾" x 1¼" x ¾" 1¼" x 1" x ¾" 1¼" x ¾" x 1" 1" x 1¼" x ¾" Elbow ¾" x ¾" 1" x 1" 1¼" x 1¼" o elbow - ends to suit fittings ¾" x ½" F ¾" x ¾" F 1" x 1" F 1¼" x 1¼" F o elbow - one end to suit fittings & one end female threaded Note: wide range of additional and special application fittings is also available, please refer to our catalogue. 13