Each radiator is supplied with two steel angle wall mounts (three mounts with 1600mm models or longer).

Transcription

1 MHS Kompact and Plan Radiators n extensive range of panel and flat fronted radiators

2 Kompact Panel Radiators - a versatile range The Kompact range of single and double panel radiators from MHS delivers variety, quality and exceptional value. With over 170 models as standard, this comprehensive range comprises Type 11 (single panel, single convector), Type 21 (double panel, single convector) and Type 22 (double panel, double convector radiators). MHS Kompacts are among some of the highest output compact panel radiators available and feature factory fitted side panels and top grilles as standard. Quality and availability espite their competitive prices MHS Kompact radiators are manufactured to the highest ISO 9001 standards and are E and IN marked. nd when you need radiators in a hurry, you needn t worry as there are thousands of panels held in the UK for instant availability. Strength and style ll MHS Kompact radiators are manufactured using 1.20 steel for their main construction and are comprehensively pre-treated and then powder coat finished to RL 9016 Traffic White. Each radiator is fully factory tested and is suitable for use with operating pressures of up to 10 R as standard (max test: 13 R) and a maximum operating temperature of up to 120º. ll Kompact radiators also have a 10 year warranty against manufacturer s defects. ll outputs have been certified to EN442. ccessories available include touch up sticks, replacements side panels and replacement top grilles and brackets. Ultimate flexibility There s over 170 standard models, and special sizes in increments of 100 can be ordered (minimum quantities apply). ll models include factory fitted top grille and side panels as standard. Packaged and ready to go Each radiator is supplied with two steel angle wall mounts (three mounts with 1600 models or longer). The robust packaging includes bubble wrap, stacking pads, cardboard edging, strong plastic corner protectors and model description labels all shrink wrapped for maximum protection during transit and on site. Nickel-plated air vent/plugs, screws and wall plugs are packed supplied with each radiator. MHS Kompact radiators can be installed with the packaging on.

3 Type 11 Type 21 Type 22 inches ode Output T50º Output T50º Output T50º ode ode Watts TUs Watts TUs Watts TUs " " " " K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K " K K K K K K K K K K K K K K K T50º = mean water temperature of 70º with a room temperature of 20º. Refer to correction factor table (back page) for operating conditions other than T50º

4 Kompact Plan Radiators The Kompact Plan flat fronted range of single and double panel horizontal and vertical radiators from MHS delivers variety, quality and exceptional value. With over 60 models as standard, this comprehensive range comprises of horizontal Type 11 (single panel, single convector) and Type 22 (double panel, double convectors) and type 10 & 20 single and double panel vertical versions. MHS Kompact Plan's are among some of the highest output flat panel radiators available. The horizontal models are supplied with factory fitted side panels and top grilles as standard and the Type 20 Vertical with side panels only. Strength and style ll MHS Kompact Plan radiators are manufactured using 1.20 steel for their main construction and a robust sheet steel flat front panel for a flawless finish. omprehensively pre-treated and then powder coat finished to RL 9016 Traffic White. Each radiator is fully factory tested and is suitable for use with operating pressures of up to 10 R as standard (max test: 13 R) and a maximum operating temperature of up to 120º. ll Kompact Plan radiators also have a 10 year warranty against manufacturer s defects. ll outputs have been certified to EN442. ccessories available include touch up sticks, replacements side panels and replacement top grilles and brackets. Packaged and ready to go Each radiator is supplied with two steel angle wall mounts (three mounts with 1600 models or longer). The robust packaging includes bubble wrap, stacking pads, cardboard edging, strong plastic corner protectors, model description labels all shrink wrapped for maximum protection during transit and on site. Nickelplated air vent/plugs, screws and wall plugs are supplied with each radiator. MHS Kompact Plan radiators may be installed with the packaging on.

5 Horizontal Models Type 11 Single Panel Single onvector Type 22 ouble Panel ouble onvector Output T50º Output T50º ode ode Watts TUs Watts TUs KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP KP Vertical Models Type 10 Single Panel Type 20 ouble Panel ode Output T50º Output T50º ode Watts TUs Watts TUs KPV KPV KPV KPV KPV KPV KPV KPV KPV KPV KPV KPV KPV Vertical models have downward facing connections and only the Type 20 versions are fitted with side panels. Vertical models are provided with an additional safety tie, always install this component to ensure enhanced retaining integrity. For operating conditions other than 50' please refer to the back page correction factor table.

6 Kompact Panel Type 11 single panel single convector Type 11 Single Panel Single onvector Type 21 ouble Panel Single onvector Type 22 ouble Panel ouble onvector Tapping entres epth Wall to Tapping entre Water ontent Lt / m Weight Kg / m / / / / / Type 21 double panel single convector / / / Type 22 double panel double convector Sizes indicated may vary by + or - 2. Minimum mounting height: x 1/2 bsp-f connections / / / / / Single panel ouble panel Securely fitted top grille (rear view) Lug positions Type: 11 = high =115 Type: 21 and 22 = high =130 = high =

7 Kompact Plan Kompact Plan Horizontal Type 22 ouble Panel ouble onvector Type 11 Horizontal single panel single convector Tapping entres epth Wall to Tapping entre Water ontent Lt / m Weight Kg / m / / / / Type 22 Horizontal double panel double convector / / / / Horizontal Kompact Plan, type 11 Kompact Plan Vertical Model Type 10 Type 20 Water ontent Lt / m Weight Kg / m Water ontent Lt / m Weight Kg / m H1 1 H H Type 10 Single Panel Type 20 ouble Panel Type 10 Type 20 Type 10 and 20 Nominal Size entre istance Wall to entre Nominal Size entre istance Wall to entre H racket fitting dimension H

8 Globe Valve Kit The MHS contract Globe TRV Kit comprises of a reversible liquid sensor bi-directional thermostatic valve and lockshield with connection adaptors for 8,10 & 15 copper pipework. Technical data hrome upon nickel plating valve body finishing Maximum working temperature of 110º Maximum working pressure of 10bar (145psi) Maximum differential pressure of 1.4bar (20psi) Thermostatic head ambient temperature range: - frost protection (position) -8 - position 3 = 20 - fully open (position) = 32 n added feature is the maintainence cap, which incorporates a screw-top to provide total shut-off during redecoration or radiator replacement. Order ode : VLVGLO-TRV (Only available as angle). Water Treatment orrection Factor Table These products are for use on closed heating systems only; they are not suitable for installation on secondary HWS circuits. On completion of the installation the entire system MUST be thoroughly cleaned and flushed to remove debris/flux residues etc. If a chemical cleanser is used, it must be thoroughly flushed from the system. Following this, the system MUST be dosed with a good eminence water treatment to prevent corrosion. System design, flushing and dosing must be in accordance with S 5449: 1990, S EN & 12831: 2003 and S 7593: 2006 IMPORTNT: Failure to observe these requirements will render the guarantee on the product void. orrosion inhibitor must be used in accordance with the manufacturer s instructions and recoendations and should take into account the particular metals within the system. t F The outputs shown within this brochure are based on S EN442, º operating conditions, giving a t of 50º, for t's other than this, a correction factor must be applied. Example: Output º t 55.5 the F = 1.145, therefore multiply the listed output by the correction factor to give actual radiator output under these operating conditions. member of the Modular Heating Group Plc 3 Juniper West, Fenton Way, Southfields usiness Park, asildon, Essex SS15 6SJ Tel: Fax: This publication is issued subject to alteration or withdrawal without notice. The illustrations and specifications are not binding in detail. ll offers and sales are subject to the ompany's current terms and conditions of sale. R/0111/6258R