All-metal gate valve Series 48
|
|
- Jessie Chad Anderson
- 5 years ago
- Views:
Transcription
1 ll-metal gate valve Series For extreme UHV and/or aggressive media Bakeable to 300 C in open and closed position Radiation resistant Maintenance-free up to 000 cycles Opening possible up to 1 bar differential pressure Body material stainless steel Manual actuator handwheel Pneumatic actuator double acting with position indicator 0 C with solenoid compact actuator valve C CF-F Ordering numbers CF-F 1-CE01 13-CE01 ½ 3-CE01 -CE01 0 -CE01 1-CE01 with position indicator 0 C: - E0 with position indicator C: - E05 Ordering numbers (specify control voltage) extended actuator valve 300 C CF-F 1-CE 13-CE ½ 3-CE7 3-CE -CE7 -CE 0 -CE7 -CE 1-CE7 1-CE 1-CE7 1-CE actuator modules see page XE7 1-XE X = customer specific with position indicator 0 C, without solenoid: - E7 (compact actuator) - E (extended actuator) further versions: see pages and 3 Bake-out jacket For bake-out we recoend coercial controllers with settable heating rate and temperature limiting device The bake-out jacket is without thermocouples and thermostats Details see page Ordering number on request 0 K1 VT Vakuumventile G, CH-99 Haag, Switzerland Tel Fax wwwvatvalvecom
2 Sealing materials Gate: metal Bonnet: metal Feedthrough Bellows Series 1 valve gate 3 guide plate 5 leaf spring 7 VTRING counter plate spring stop support valve seat side Features Technical data Continued next page 1) Maximum values: depending on operating conditions and sealing materials VTRING configuration (see glossary) Sealing surfaces are only elastically deformed Locked in closed position Leak rate: body, valve seat < 1 - mbar Is -1 Pressure range Differential pressure on the gate UHV to bar (abs) bar in either direction Differential pressure at opening bar mbar (1 bar with reduced cycle life) mbar with reduced cycle life Cycles until first service - - / / Temperature 1) - Valve body 300 C - Manual actuator 1 C (option: C) - Pneumatic actuator C - Position indicator 0 C (option: C) - Solenoid 0 C - Flexible bake-out jacket 300 C (valve), 115, 30 V, /0 Hz Heating and cooling rate - / - 0 / C h -1 / C h -1 / 5 C h -1 Material - Valve body, mechanism ISI 3L (135, 1) - Bellows ISI 3L (135) Seal: bonnet, gate Mounting position: - Solenoid metal any V DC, 5 W (others see «Options») Position indicator: contact rating 0 C C - Voltage V C / DC V C / DC - Current 1 1 Valve position visual (mechanical) VT Vakuumventile G, CH-99 Haag, Switzerland Tel Fax wwwvatvalvecom K1 1
3 ll-metal gate valve Series ctuators modular selection 1 Body, valve mechanism, bellows : Gy, bakeable to 300 C Pneumatic actuator compact : 5 Gy, bakeable to C option: Gy, bakeable to 1 C 3 Pneumatic actuator extended : 5 Gy, bakeable to C option: Gy, bakeable to 1 C Manual actuator : 5 Gy, bakeable to 1 C option: 5 Gy, bakeable to C 5 Special pneumatic actuator for hot zone : Gy, bakeable to 0 C solenoid 0 C position indicator 0 C position indicator C position indicator 0 C C) (1 C) C) (1 C) C) (1 C) 300 C 0 C 1 C) ( C) 300 C 300 C 300 C C (1 C) bakeability Maximum values: depending on operating conditions and sealing materials ccessories Seal kit - Fittings for installation of the valve: series 33 - Flexible bake-out jacket: see page Consisting of seals for gate (VTRING) and bonnet Ordering No: see operating manual or price list Technical data manual pneumatic (nominal ID) CF-F flange molecular flow conductance turns per stroke weight compressed air pressure min - max overpressure volume of air cylinder closing or opening time weight OD ls -1 n kg lbs bar psi l ft 3 s kg lbs 1 ⅓ ¾ ½ ½ X K1 VT Vakuumventile G, CH-99 Haag, Switzerland Tel Fax wwwvatvalvecom
4 Series Options ctuator: - ccessory for pneumatic actuator for faster closing 1) Maximum values: depending on operating conditions and sealing materials - Pneumatic actuator compact or extended Gy, bakeable to 1 C 1) - Pneumatic actuator for hot zone: radiation resistant to Gy, bakeable to 0 C - Manual actuator bakeable to C 1) - Solenoid for impulse actuation: actual valve position is maintained at power failure - Solenoid for 1, V DC,,, 115,, 30 V Hz,, 115,, 30 V 0 Hz - Solenoid radiation resistant to Gy (standard Gy) - Position indicator for pneumatic actuator bakeable to C - Position indicator for manual actuator bakeable to 0 C or C Dia 1 - Double position indicator ( switches each for the positions «open» and «closed») Valve: - Customer specified flanges - Larger diameters on request - ntimagnetic version with defined permeability: see page - Window in valve gate: see specification below - Ports (diagram 1) for roughing (by-pass), venting or for gauges valve recoended port CF-F X Y ½ Ordering information for options: Ordering No of valve-x (e g -CE-X, X = port CF-F in positions and B) Gate valve with window window welded into valve gate window retrofitable at VT window material: sapphire Options: - special glass qualities - other materials (e g berillium) - other window sizes 1 valve body VTRING 3 valve gate window valve optically free diameter «S» thickness of glass ½ VT Vakuumventile G, CH-99 Haag, Switzerland Tel Fax wwwvatvalvecom K1 3
5 ll-metal gate valve Series Main dimensions Valve with manual actuator (") (1½") Valve with manual actuator - 0 (½" - ") Valve with manual actuator (") required for dismantling d leak detection hole j bake-out area Projection E Flange dimensions see page 5 K L M N O O1 P Q T U U1 V W X Y Z ½ K1 VT Vakuumventile G, CH-99 Haag, Switzerland Tel Fax wwwvatvalvecom
6 Flange dimensions CF-F,, (", 1½", ") CF-F - 0 (½" - ") Series Projection E OD B B1 C D E x F G H1 H ½ 1 ⅓ ¾ ½ x M x M x M x M x M x M VT Vakuumventile G, CH-99 Haag, Switzerland Tel Fax wwwvatvalvecom K1 5
7 ll-metal gate valve Series Main dimensions Valve with pneumatic actuator - (" - 1½") Valve with pneumatic actuator - 0 (½" - ") Valve with pneumatic actuator - 3 (" - 1") mechanical position indication compressed air connection leak detection hole emergency operation required for dismantling electrical connection j bake-out area Projection E L1 and R for extended actuator / flange dimensions see page 7 K L L1 M N O O1 P Q R S T U U1 V W X x Y ½ x x x 197 x x 0 3 x 3 K1 VT Vakuumventile G, CH-99 Haag, Switzerland Tel Fax wwwvatvalvecom
8 Flange dimensions CF-F,,, (", 1½", ", ") CF-F - 0 (½" - ") Series 3 customer specific Projection E OD B B1 C D E x F G H1 H ½ 1 ⅓ ¾ ½ x M x M x M x M x M x M 3 x M VT Vakuumventile G, CH-99 Haag, Switzerland Tel Fax wwwvatvalvecom K1 7
All-metal angle valve Series 57
ll-metal angle valve Series 57 Main applications For vacuum processes with extreme UHV requirements and / or when using aggressive media Ordering information Valve with manual actuator hexagon head Valve
More informationUHV gate valve Series 10
UHV gate valve Series Main applications The standard valve for UHV isolation applications in research and industry Ordering information Valve with manual actuator crank handle Ordering numbers ISO-F metric
More informationPendulum valve Series 16
Pendulum valve Series 1 Series 1.2 Main applications pplications requiring a compact design Especially suited to demanding corrosive processes Ordering information Valve with pneumatic actuator single
More informationHV gate valve Series 11
HV gate valve Series 11 Main applications General purpose valve for isolation in high vacuum systems Especially suited to pump isolation Ordering information Valve with manual actuator crank handle Ordering
More informationHV gate valve with protective ring Series 17
HV gate valve with protective ring Series 17 Main applications Isolation valve for contaminating processes Ordering information Series 17., Valve with manual actuator turning handle Ordering numbers ISO-F
More informationGate valve control system Series 64
ate valve control system Series ontrol and isolation valve eneral purpose stainless steel valve daptive pressure control with stepper motor or throttling by adjustable 3-position pneumatic actuator ody
More informationANGLE/INLINE VALVE WITH SOFT-PUMP FUNCTION, SERIES 29.0/29.2
ANGL/INLIN VALV WITH SOFT-PUMP FUNCTION, SRIS 9.0/9. For pumping and venting of HV systems when few turbulences, particles, substrate movements and condensation are important. Resistant against differential
More informationAGILENT VACUUM VALVEs
GILENT VCUUM valves 2-3 gilent Vacuum Valve Solutions 4-17 gilent High Performance Valves 18-21 Stainless Steel Tube Valves 22-23 Electromagnetic Block Valves 24 Variable Leak Valves gilent Vacuum Valve
More informationAGILENT VACUUM VALVES
GILENT VCUUM VLVES 2-3 gilent Vacuum Valve Solutions 4-23 gilent High Performance Valves 24-27 Stainless Steel Tube Valves 28-29 Electromagnetic Block Valves 30 Variable Leak Valves GILENT VCUUM VLVE SOLUTIONS
More informationAgilent Aluminum Block Valves - Series 26 NW 16 - NW 40 ISO-KF Flange
gilent lock Valves - Series 26 - ISO-KF Flange ata sheet gilent Valves by Thank you for choosing gilent Valves by VT. With the combination of these two well-known names in the Vacuum industry, we are confident
More informationG = basic version A = with SPS H = with PFO C = with SPS and PFO. Ordering number example:
1 with extended control range Downstream pressure control and isolation valve Compact design Fast, virtually particlefree and shockfree operation Highperformance, integrated controller Low minimum controllable
More informationButterfly valve control system Series 61
utterfly valve control system Series 61 Downstream pressure control valve Very fast operation High-performance, integrated controller ody material aluminum or stainless steel Valve with integrated controller
More informationInstallation, Operating & Maintenance Instructions. UHV gate valve with pneumatic actuator. Series 108 DN mm (I. D. 2½ 8 )
Installation, Operating & Maintenance Instructions UHV gate valve with pneumatic actuator Series 108 DN 63 200 mm (I. D. 2½ 8 ) This manual is valid for the following product ordering numbers: 108.. -.
More informationInstallation, Operating & Maintenance Instructions. All-metal gate valve with compact or extended pneumatic actuator
Installation, Operating & Maintenance Instructions All-metal gate valve with compact or extended pneumatic actuator Series 48 DN 16 320 mm (I.D. ⅝" 12") This manual is valid for the following product ordering
More informationGateKeeper Aluminum Gate Valves
GateKeeper Aluminum Gate Valves 250 mm Air-Operated 100 mm Air-Operated 63 mm Air-Operated The GateKeeper Series Aluminum Gate Valves are economical, reliable vacuum shut-off devices designed and manufactured
More informationVacuum Gate Valves Product Introduction Vacuum gate valves are used primarily for the protection of high vacuum pumps but can also be used to 'valve-off' two connecting chambers. The next generation of
More informationPendulum valve control system Series 65
Pendulum valve control system Series 65 Series 65.2 Main applications Downstream pressure control and isolation valve for SEMI and FPD processes Optimal for corrosive etching and cleaning processes Ordering
More informationPENDULUM CONTROL VALVE, SERIES 65.0
Downstream pressure control and isolation valve for SEMI and FPD processes. Optimal for corrosive etching and cleaning processes. Virtually particle-free and shock-free operation Excellent pressure control
More informationMini UHV gate valve with manual actuator with pneumatic actuator
Mini UHV gate valve with manual actuator with pneumatic actuator This manual is valid for the valve ordering numbers: 004/8/3/34-. E0/08 004/8/3/34-. E//3/4 004/8/3/34-. E//3/4 004/8/3/34-. E4/4/34/44
More informationInstallation, Operating & Maintenance Instructions. HV gate valve with pneumatic actuator. Series 110 DN mm (I. D.
Installation, Operating & Maintenance Instructions HV gate valve with pneumatic actuator Series 110 DN 250 320 mm (I. D. 10" 12") This manual is valid for the following product ordering numbers: 11048-.
More informationInstallation, Operating & Maintenance Instructions. Series 081, DN (I.D. 2½" - 4") Hot surfaces; do not touch!
Vacuum Gate Valve This manual is valid for the valve ordering number(s): 08136-FA14/24/34/44 08138-FA14/24/34/44 08140-FA14/24/34/44 The fabrication number is indicated on each product as per the label
More informationPendulum valve control system Series 65
Pendulum valve control system Series 65 Series 65.0 Main applications Downstream pressure control and isolation valve for SEMI and FPD processes Optimal for corrosive etching and cleaning processes Ordering
More informationProduct data sheet. Series 210, DN (2½ - 6 ) Ordering No PE
Series 210, DN 63 160 (2½ - 6 ) Ordering No. 210..-PE06-000. Manual actuator with hand lever Advantages Three sizes available: DN 63, 100, 160 with ISO-F flanges All vacuum parts made of stainless steel
More informationIsolation Valves. 3.1 General Information. 3.2 N-Series Valves. 3.3 Poppet Valves. 3.4 Ball Valves. 3.5 Genesis Valves & Fittings 1
Section Three 3 3.1 General Information 3.2 N-Series 3.3 Poppet 3.4 all 3.5 Genesis & Fittings 1 3.6 Manual utterfly 3.7 Pendulum 3.8 Linear Gate 3.9 ellowless Poppet & Leak 2 3.10 Valve Heaters 2 3.11
More informationHV Gate Valve with pneumatic actuator
HV Gate Valve with pneumatic actuator This manual is valid for the valve ordering number(s): 09134-_E14/24/34/44 09136-_E14/24/34/44 09138-_E14/24/34/44 09140-_E14/24/34/44 09144-_E14/24/34/44 The fabrication
More informationUHV Angle valve (Series 284) with pneumatic actuator, single acting with closing spring (NC)
UHV Angle valve (Series 84) with pneumatic actuator, single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 84 85 The fabrication number is indicated on each product
More information83000 All Aluminum Gate Valves
All Aluminum Gate Valves Table of Contents Introduction... Page 120... Page 121 Model Key Guide... Page 122 1.5" ID (DN40mm)... Page 123 2.0" ID (DN50mm)... Page 124 2.5" ID (DN63mm)... Page 125 3.0" ID
More informationVacuum Valves. Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves
Vacuum Valves Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves 176.01.02 Excerpt from the Product Section Edition December 2011 Contents General The
More informationInstallation, Operating & Maintenance Instructions. Hot surfaces; do not touch!
HV Angle valve (Series 263/265) with manual actuator This manual is valid for the valve ordering number(s): 263/26540-QA/H/E01 263/26544-QA/H/E01 The fabrication number is indicated on each product as
More informationHV Angle valve (Series 264) HV Inline valve (Series 265) with pneumatic actuator, single acting with closing spring (NC)
HV Angle valve (Series 64) HV Inline valve (Series 65) with pneumatic actuator, single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 64 65 The fabrication number
More informationThis manual is valid for the valve ordering numbers: E01/ E01/ E01/ E01/08
8+9*DWH9DOYH ZLWKPDQXDODFWXDWRU This manual is valid for the valve ordering numbers: 10836-. E01/08 10840-. E01/08 10844-. E01/08 10846-. E01/08 The respective product identification is given on each valve
More informationControl Gate Valve with stepper motor actuator
Control Gate Valve with stepper motor actuator This manual is valid for the valve ordering numbers: 64036-.E52 and 64040-.E52 The respective product identification is given on each valve in the following
More informationInstallation, Operating & Maintenance Instructions. HV angle valve with pneumatic actuator single acting with closing spring (NC)
Installation, Operating & Maintenance Instructions HV angle valve with pneumatic actuator single acting with closing spring (NC) Series 264 DN 10 50 mm (I. D. ⅜" 2") HV inline valve with pneumatic actuator
More informationHV angle valve with single acting pneumatic actuator and closing spring (NC)
Installation, Operating & Maintenance Instructions HV angle valve with single acting pneumatic actuator and closing spring (NC) Series 264 DN 100 160 mm (I. D. 4 6 ) This manual is valid for the following
More informationLeader in Vacuum Valves
Leader in Vacuum Valves Vacuum Valve Applications 2 Today s high-tech manufacturing and research often require a reliable, high quality vacuum environment. Applications for vacuum valves include: - Semiconductor
More information3/2 - Way Valve with metal actuator 1/2 up to 1 1/2. Technical Information
3/2 - Way Valve 78 with metal actuator /2 up to /2 Pneumatically operated 3/2-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, data sheet Type 78) ompact design
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationRight Angle Control Valve 7051
Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium
More informationVacuum Valves. Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves
Vacuum Valves Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves 176.01.02 Excerpt from the Product Section C14 Edition July 2007 Contents General The
More informationIsolation Valves. 3.1 General Information N-Series Valves Poppet Valves Ball Valves Genesis Valves & Fittings 20
Isolation Valves Section Three 3 3.1 General Information 2 3.2 N-Series Valves 4 3.3 Poppet Valves 6 3.4 all Valves 18 3.5 Genesis Valves & Fittings 20 3.6 Manual utterfly Valves 27 3.7 Pendulum Valves
More informationHV-Angle Valve (Series 264) HV-InlineValve (Series 265) with electromagnetic actuator single acting with closing spring (NC)
HV-Angle Valve (Series 264) HV-InlineValve (Series 265) with electromagnetic actuator single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 26... 26428 -K A 61 A..
More informationRectangular Door L-VAT with pneumatic actuator double acting
Rectangular Door L-VAT with pneumatic actuator double acting This manual is valid for the products: 0 7 5 1 0 U A 2 4 0 0 0 1 4 character option code Size 10... 46 x 236 12... 50 x 336 Actuator 24... without
More informationEvery component precisely matched
Series 200 Every component precisely matched Powerful valve actuator 1 Most commonly used is the electric actuator series SHE as shown here. It is robust, provides a constant seating force and is cost
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationTE 91 PRECISION ROTARY VACUUM TRIBOMETER
TE 91 PRECISION ROTARY VACUUM TRIBOMETER Description The TE 91 Precision Rotary Vacuum Tribometer is based on a bench mounted test chamber. A motor driven test spindle, in the form of standard rotary feedthrough,
More information3/2-Way Valve DN 15 up to DN 40
3/-Way Valve 78 DN up to DN Pneumatically operated 3/-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 78) ompact design Unaffected by lightly
More informationT 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
More informationVacuum Valves. Ball Valves. Angle Valves. In-line Valves. Special Valves. Gate Valves. Valve Accessories
Vacuum Valves Ball Valves Angle Valves In-line Valves Special Valves Gate Valves Valve Accessories Contents Introduction Page -3 Ball Valves 2-Way Ball Valves 3-Way Ball Valves Angle Valves Manual Pneumatic
More informationWeir-Style Diaphragm Valves
www.swagelok.com Weir-Style Diaphragm s DW Series Standard valve sizes 1/2 to 4 in. and minivalve sizes 1/4, 3/8, and Manual and pneumatic actuation Kwik-Clamp, TS series sanitary clamp, and tube butt
More informationPUSH PULL DEVICES. Section 03. Introduction to Push Pull Devices 044. Magnetically-coupled devices. MPPRL - Rotary and Linear Motion 046
Section PUSH PULL DEVICES Introduction to Push Pull Devices 044 Magnetically-coupled devices MPPRL - Rotary and Linear Motion 046 MPPL - Linear Guided Motion 048 MPP - Linear Unguided Motion 050 Edge-welded
More informationValve Solutions Series 150/160 and V-100 Valves
w w w. m k s i n s t. c o m Valve Solutions Series 1/160 and V- Valves High vacuum bellows sealed valves Features and enefits hoice of manual, pneumatic or electropneumatic actuation ngle and Inline body
More informationVenting valves. Valves. Manually actuated. Venting valves. Installation elements
Installation elements Venting Manually actuated Venting For manually venting small vacuum chambers Valve opens and closes easily by loosening/ tightening the screw cap FVB = Venting valve HA = Manually
More informationVacuum pumps for the ESRF EBS project Michael Hahn
3 rd Rencontres Nationales DU RESEAU TECHNOLOGIES DU VIDE SEVRIER, 10 13 October 2016 Vacuum pumps for the ESRF EBS project Michael Hahn On behalf of the EBS Accelerator Project Team OUTLINE Project definition
More informationType and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
More informationINSTALLATION and OPERATING INSTRUCTIONS
INSTALLATION and OPERATING INSTRUCTIONS UHV-LEAKVALVE ND 3 pneumatically operated NC, 2-positions cylinder. Valve F3CF1616-29 Valve F3CF3516-29 Valve F3VCR-29 Heating Cartridge HF3 Heater Controller HF3-S1
More information3/2-Way Valve DN 15 up to DN 50
/-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated
More informationStainless steel butterfly valves Index
Index General information Product information utterfly valves, hand-actuated utt weld connections DIN - Inch - ISO dimensions 377 Other connections Various connection combinations 378 utterfly valves,
More information3/2-Way Valve DN 15 up to DN 50
/-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated
More informationEvery component precisely matched
Series 8B Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,
More informationStandard Linear Shift Mechanism LSM/HLSM Series
Technical Datasheet Standard Linear Shift Mechanism LSM/HLSM Series Production-proven linear motion along the port axis (Z) for sample positioning and production applications. Comprehensive series offering
More informationQBV SERIES Butterfly Valves
QV SERIES utterfly Valves KEY HIGH VUUM PROUTS, IN.'s QV Series butterfly valves are designed and manufactured to offer reliable performance, be versatile and offer an economic benefit. These valves have
More informationC14. Vacuum Valves. Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves.
176.01.02 Excerpt from the Product Section Edition May 2005 Vacuum Valves Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves vacuum Vacuum Valves Contents
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More information3-port seat valves PN10 with flanged connection
4 420 cvatix 3-port seat valves PN10 with flanged connection VXF31.. Grey cast iron EN-GJL-250 valve body DN 15 150 k vs 2.5 315 m 3 /h Can be equipped with SX..-electromotoric or SKD..-, SK..- and SKC..-
More informationStandard Linear Shift Mechanism LSM Series
Technical Datasheet Standard Linear Shift Mechanism LSM Series Production-proven linear motion along the port axis (Z) for sample positioning and production applications. Comprehensive series offering
More informationMotor Valve GS 1 series, DN 15 up to DN 150
100 75 50 25 0 Motor Valve 8030 GS 1 series, DN 15 up to DN 150 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant
More information2/2 way Coaxial valve CXRM compact, pilot operated Modular design
2/2 way Coaxial valve CXRM compact, pilot operated Modular design Model code (also example order) CXRM 2/2 F C 2 08 040 038 V Standard NC (closed when de-energised) With external 3/2-way pilot valve 4
More information3-Port Seat Valves with Flange, PN 6
4 410 3-Port Seat Valves with Flange, PN 6 VXF21... Grey cast iron EN-GJL-250 valve body DN 25... k vs 1.9...160 m 3 /h Can be equipped with SQX... electromotoric or SKD...-, SK...- and SKC...- electrohydraulic
More information3-Port Seat Valves with Flange, PN 10
4 420 3-Port Seat Valves with Flange, PN 10 VXF31... Grey cast iron EN-GJL-250 valve body DN 15 150 k vs 2.5 315 m 3 /h Can be equipped with SQX... electromotoric or SKD...-, SK...- and SKC...- electrohydraulic
More informationLock it in with IPEX DK Series Dialock. Diaphragm Valves. IPEX DK Series Dialock Diaphragm Valve VALVE AVAILABILITY
IPEX DK Series Dialock Diaphragm Valve Lock it in with IPEX DK Series Dialock Diaphragm Valves IPEX is pleased to introduce our new DK Series Dialock Diaphragm Valves, available in manual and pneumatically
More informationGas regulating valve EVR 116, motorized, DN 16 ISO-KF
Gas regulating valve EVR 116, motorized, DN 16 ISO-KF High gas throughput Very broad regulating range With integrated motor control electronics Characteristic Gasflow [mbar l/s] 1000 100 10 1 10-1 10-2
More informationNE January 2016 SINGLE SEATED CAGE VALVES SERIES 9100 MODEL Previously manufactured by Dezurik and Honeywell
391.01-3NE January 2016 SINGLE SEATED CAGE VALVES SERIES 9100 MODEL 9101 Previously manufactured by Dezurik and Honeywell Description: Model 9101 valve combines a heavy, duty, single-seated, cage-type
More informationINDIAN INSTITUTE OF TECHNOLOGY KANPUR Kanpur , Uttar Pradesh, India Centre for Lasers and Photonics
INDIAN INSTITUTE OF TECHNOLOGY KANPUR Kanpur 208016, Uttar Pradesh, India Centre for Lasers and Photonics Enquiry no.: CELP/RV/EQP/MHR/2017/1 Enquiry date: 23/04/2018 Closing date: 17/05/2018 Sealed quotations
More informationROTARY DRIVES. Section 01. Introduction to the MagiDrive Range 004. Actuation Options 006. SOLID MagiDrive Series. MD10 Solid Range 008
Section ROTARY DRIVES Introduction to the MagiDrive Range 004 Actuation Options 006 SOLID MagiDrive Series MD10 Solid Range 008 MD16N/MD16A Solid Range 0 MD40N/ MD40A Solid Range 2 MD40 Solid Range 4 MD64
More informationInstallation, Operating & Maintenance Instructions
Installation, Operating & Maintenance Instructions Variable leak valve DN 16 (5/8") with integrated controller with Logic interface Series 590 DN 16 mm (I.D. 5/8") This manual is valid for the following
More informationForbes Marshall Control Valve. Operational Economy with Optimum Control
Forbes Marshall Control Valve Operational Economy with Optimum Control Forbes Marshall Control Valve The Forbes Marshall Control Valve provides excellent performance on steam, liquid and gas applications.
More informationTURBOMOLECULAR PUMPS ATP SERIES
TURBOMOLECULAR PUMPS ATP SERIES TURBOMOLECULAR PUMPS ATP SERIES Introduction The ATP conventional turbomolecular pumps have a proven track record of reliability. Rotors made exclusively from carefully
More informationOptional Features and Accessories
Optional Features and ccessories Million Cycle Valves Vacuum Research Valves have been designed to eliminate sliding friction to extend operating life and reduce particle generation. For example, all of
More informationRemote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
More information2-port and 3-port valves with T-bypass PN 16
4 854 2-port valves 3-port valve with T-bypass CVTIX 2-port and 3-port valves with T-bypass PN 16 VVP45..S VMP45..S ronze CC499K valve body DN 10 and DN 15 k vs 0.63 2.5 m 3 /h Externally threaded connections
More informationSeries 2003 / Three-way control valve. Features. Wörth am Main
Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they
More informationVacuum Components C A T A L O G
Vacuum Components C A T A L O G 1 Contents 1 Vacuum valves Angle Valves - 4 Inline Valves - 10 Butterfly & Check Valves - 14 2 s & Fittings Elastomer Seal ISO-KF - 18 Elastomer Seal ISO-LF - 34 Metal Seal
More informationPREHEATER BYPASS SYSTEMS
PREHEATER BYPASS SYSTEMS PREHEATER BYPASS SYSTEMS OVERVIEW 2014 GS FEED WATER HEATER BYPASS SYSTEM General Description These valves are designed to bypass high pressure feed water around the pre-heaters
More informationBUSCHJOST SERIES
c Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recoended. BUSCJOST 82400 SERIES 2/2 - way valves DN 8... DN 50 For neutral gases and liquids
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationFasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
More informationWater Cooled Vacuum Valves, Gate and Poppet Style
Water Cooled Vacuum Valves, Gate and Poppet Style Port Sizes from 2 to 32 Inch, 63 to 800 mm ANSI, ISO, JIS, Conflat or Custom s Electric Motor or Electro-Pneumatic Actuator Available for DIV. 1, grp.
More informationAVM 105, 115: Valve actuator
Product data sheet 6.1 51.361 VM 105, 115: Valve actuator How energy efficiency is improved Torque-dependent cut-off facility for efficient usage of energy Features ctivation of 2-way and 3-way valves
More informationSeries 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
More information3-port seat valves PN6 with flanged connection
4 410 cvatix 3-port seat valves PN6 with flanged connection VXF21.. Grey cast iron EN-GJL-250 valve body DN 25...100 k vs 1.9...160 m 3 /h Can be equipped with SQX.. electromotoric or SKD..-, SK..- and
More informationAIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION
compact cylinders, standardised to ISO 21287 compatibility for assembly ISO 15552 mountings double acting - Series 449 short stroke cylinders single acting / double acting Series 441 AIR CYLINDERS cylinders
More informationR-Series Rod Model RS. Data Sheet. Model RS Rod-style sensor with IP68/IP69K Super Shield Housing. Interrogation Return wire.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors R-Series Rod Model RS SENSORS Document Part Number 551251 Revision A Data Sheet Model RS Rod-style sensor with IP68/IP69K Super
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationSingle Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
More informationNORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design
Type series booklet 7653.1/8-10 NORI 320 Globe valves with gland packing with non-turning stem flanged or butt-weld ends ZXLF ZXSF PN 250-320 DN 65-200 Application In industrial plants, power stations,
More informationEvery component precisely matched
Series 9 Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,
More information2-Port and 3-Port Zone Valves PN 16
4 842 2-port valves VVI4615 to VVI4625 3-port valves VXI4615 to VXI4625 2-port valves VVS4615 to VVS4625 3-port valves VXS4615 to VXS4625 2-Port and 3-Port Zone Valves PN 16 VVI46 VXI46 VVS46 VXS46 Hot-pressed
More informationSeries 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
More informationN-Line Valves. Surface Stepping Actuators
N-Line Valves Surface Stepping Actuators N-Line Valves SA-II Surface Stepping Actuator For Rising Stem Chokes The N-Line Valves SA-II Stepping Actuator is a pneumatically or hydraulically powered rotary
More information