All-metal angle valve Series 57
|
|
- Lorin Small
- 5 years ago
- Views:
Transcription
1 ll-metal angle valve Series 57 Main applications For vacuum processes with extreme UHV requirements and / or when using aggressive media Ordering information Valve with manual actuator hexagon head Valve with pneumatic actuator single acting with closing spring (NC) double acting Ordering numbers CF-R with position indicator with position indicator without position indicator 80 C 200 C ⅝ 5712-GE GE GE05 1½ GE GE GE05 2 ½ 5703-GE GE GE GE GE GE GE GE GE05 Ordering numbers CF-R without solenoid valve without position indicator without solenoid valve with pos. indicator 80 C with solenoid valve with pos. indicator 80 C 10 ⅜ XE11 1) XE21 1) XE1 1) ⅝ 5712-GE GE GE1 1½ GE GE GE1 2 ½ 5703-GE GE GE1 570-GE GE GE GE GE GE1 ⅝ 5712-GE GE GE 1½ GE GE GE 2 ½ 5703-GE GE GE 570-GE1 570-GE2 570-GE GE1 570-GE2 570-GE 1) CF-R flanges (others on request) Other versions: see pages Bake-out jacket See page 0: ordering information and technical data on request To control the heating process we recoend using coercial controllers with settable heating rate and temperature limiting device. Our bake-out jackets are supplied without thermocouples and thermostats K
2 Series 57 Features Body material: stainless steel VTRING configuration: see glossary Sealing surfaces are only elastically deformed argest possible conductance for the nominal diameter Radiation resistant to 10 8 Gy closes at a mechanical stop no torque wrench required Functional principle 1 VTRING 2 Bonnet seal 3 Bellows Valve seat side Technical data eak rate: valve body, valve seat < mbar Is -1 Pressure range XHV to 5 bar (abs) Differential pressure on the gate 5 bar Differential pressure at opening 1 bar 1) Cycles until first service E Bake-out temperature 2) Valve body 50 C open 350 C closed Manual actuator 3) : - hexagon head 50 C open 350 C closed C open and closed Pneumatic actuator 3) : - single acting with closing spring 150 C - double acting 200 C Solenoid valve 3) 80 C Position indicator 3) 80 C (option: 200 C) Heating and cooling rate 0 C h -1 Material Valve body, mechanism ISI 3 (1., 1.35) Bellows ISI 3 (1.35) 1) > 1 bar with reduced number of cycles 2) Maximum values: depending on operating conditions and sealing materials 3) Further details and options: see pages Seal: bonnet, gate Feedthrough Mounting position Solenoid valve metal bellows any Position indicator: contact rating Voltage 50 V C / DC Current 80 C: C: 1 Valve position indication 2 V DC, 2.5 W (others on request) visual (mechanical) Further technical data on next page K 209
3 ll-metal angle valve Series 57 Continued Technical data Valve with manual actuator Valve with pneumatic actuator, single acting with closing spring Valve with pneumatic actuator, double acting (nominal I. D.) CF-F flange Conductance (molecular flow) Torque Turns per stroke Weight Compressed air min. max. overpressure Closing or opening time Volume of pneumatic actuator Weight Compressed air min. max. overpressure Closing or opening time Volume of pneumatic actuator Weight O. D. ls -1 Nm ftlb n kg lbs bar psi s l ft 3 kg lbs bar psi s l ft 3 kg lbs 10 ⅜ 1⅓ ⅝ 1⅓ ½ 2 ¾ ½ ½ Bodies and actuators: modular selection Bakeability Maximum values: depending on operating conditions and sealing materials 1 3 Valve body (angle, inline, T valve), plate, bellows 10 8 Gy, bakeable to 50 C open / 350 C closed Manual actuator with hexagon head 10 8 Gy, bakeable to 50 C open / 350 C closed Gy, bakeable to 300 C open and closed 5 Manual actuator with cylindrical head 10 8 Gy, bakeable to 50 C open / 350 C closed Gy, bakeable to 300 C open and closed K
4 Series 57 Position indicator for manual actuator 10 5 Gy, bakeable to 80 C (options: 10 Gy / 200 C, 10 8 Gy / 300 C) 7 Handwheel for hexagon head 10 8 Gy, bakeable to 200 C 10 Gy, bakeable to 50 C 8 Handwheel with free wheel for cylindrical head 10 5 Gy, bakeable to 120 C 10 Gy, bakeable to 50 C 9 Pneumatic actuator, double acting 10 5 Gy, bakeable to 200 C (options: 10 Gy / 1 C) 10 Pneumatic actuator, single acting with closing spring 10 5 Gy, bakeable to 150 C (options: 10 Gy / 1 C) 11 Position indicator 10 5 Gy, bakeable to 80 C (option: 10 Gy / 200 C) 12 Solenoid valve 10 Gy, bakeable to 80 C Options ctuator Solenoid valve for impulse actuation: last valve position is maintained at power failure Other solenoid valve voltage (standard: 2 V DC) 1) Maximum values: depending on operating conditions and sealing materials Position indicator for manual and pneumatic actuator bakeable to 200 C 1) (standard: 80 C) Double position indicator (2 switches each for the positions «open» and «closed») Pneumatic actuator radiation resistant to 10 Gy, bakeable to 1 C 1) Manual actuator with cylindrical head Valve Customer specified flanges ntimagnetic version with defined permeability: see glossary CF-F flanges (fixed flanges), ISO-KF flanges, weld necks Valve with different flanges (e. g. CF / KF, CF / Cajon VCR) Valve without bonnet flange, welded (for tritium systems) Inline valve T valve Ordering information for options: Ordering No. of valve-x (e. g GE02-X, X = T valve) E Spare parts Seals on request (specify fabrication number of valve) ccessories Flexible bake-out jacket: see page 0 Flange connections for installation of the valve: see series 33 Handwheel - for hexagon head ( ) - with free wheel for cylindrical head ( ) - with sliding clutch for hexagon head ( ) - with sliding clutch and free wheel for cylindrical head ( ) K 211
5 ll-metal angle valve Series 57 Main dimensions Valve with manual actuator: hexagon head 0 (⅝" ") handwheel for hexagon head (⅝" - ") Valve with pneumatic actuator: single acting with closing spring 10 (⅜" 2½") 0 (" ") handwheel for cylinder (⅝" - ") cylindrical head (⅝" - ") Flange dimensions: see page N O P Q S SW T U X X1 Y Y1 Z. ⅝ ½ ½ a Valve seat side Required for dismantling Compressed air connection Electrical connection Mechanical position indication Emergency operation eak detection hole Flange dimensions: see page 213 N O P Q R T U V W 10 ⅜ ⅝ ½ ½ K
6 Series 57 Main dimensions Valve with pneumatic actuator: double acting 0 (2½" ") Flange dimensions CF-R 0 (⅝" ") a Valve seat side Required for dismantling Compressed air connection Electrical connection Mechanical position indication Emergency operation eak detection hole E. ⅝ 1. ½ 2. ½ 0 10 / ⅜ / ⅝ 1. ½ 2. ½ 0 N O P Q R T U V O. D. 1⅓ / 1⅓ 2 ¾ ½ 8 B C D E F H1 H2 M K 213
All-metal gate valve Series 48
ll-metal gate valve Series For extreme UHV and/or aggressive media Bakeable to 300 C in open and closed position Radiation resistant Maintenance-free up to 000 cycles Opening possible up to 1 bar differential
More informationANGLE/INLINE VALVE WITH SOFT-PUMP FUNCTION, SERIES 29.0/29.2
ANGL/INLIN VALV WITH SOFT-PUMP FUNCTION, SRIS 9.0/9. For pumping and venting of HV systems when few turbulences, particles, substrate movements and condensation are important. Resistant against differential
More informationUHV gate valve Series 10
UHV gate valve Series Main applications The standard valve for UHV isolation applications in research and industry Ordering information Valve with manual actuator crank handle Ordering numbers ISO-F metric
More informationHV gate valve Series 11
HV gate valve Series 11 Main applications General purpose valve for isolation in high vacuum systems Especially suited to pump isolation Ordering information Valve with manual actuator crank handle Ordering
More informationPendulum valve Series 16
Pendulum valve Series 1 Series 1.2 Main applications pplications requiring a compact design Especially suited to demanding corrosive processes Ordering information Valve with pneumatic actuator single
More informationHV gate valve with protective ring Series 17
HV gate valve with protective ring Series 17 Main applications Isolation valve for contaminating processes Ordering information Series 17., Valve with manual actuator turning handle Ordering numbers ISO-F
More informationAgilent Aluminum Block Valves - Series 26 NW 16 - NW 40 ISO-KF Flange
gilent lock Valves - Series 26 - ISO-KF Flange ata sheet gilent Valves by Thank you for choosing gilent Valves by VT. With the combination of these two well-known names in the Vacuum industry, we are confident
More informationAGILENT VACUUM VALVEs
GILENT VCUUM valves 2-3 gilent Vacuum Valve Solutions 4-17 gilent High Performance Valves 18-21 Stainless Steel Tube Valves 22-23 Electromagnetic Block Valves 24 Variable Leak Valves gilent Vacuum Valve
More informationAGILENT VACUUM VALVES
GILENT VCUUM VLVES 2-3 gilent Vacuum Valve Solutions 4-23 gilent High Performance Valves 24-27 Stainless Steel Tube Valves 28-29 Electromagnetic Block Valves 30 Variable Leak Valves GILENT VCUUM VLVE SOLUTIONS
More informationGate valve control system Series 64
ate valve control system Series ontrol and isolation valve eneral purpose stainless steel valve daptive pressure control with stepper motor or throttling by adjustable 3-position pneumatic actuator ody
More informationPENDULUM CONTROL VALVE, SERIES 65.0
Downstream pressure control and isolation valve for SEMI and FPD processes. Optimal for corrosive etching and cleaning processes. Virtually particle-free and shock-free operation Excellent pressure control
More informationPendulum valve control system Series 65
Pendulum valve control system Series 65 Series 65.2 Main applications Downstream pressure control and isolation valve for SEMI and FPD processes Optimal for corrosive etching and cleaning processes Ordering
More informationVacuum Gate Valves Product Introduction Vacuum gate valves are used primarily for the protection of high vacuum pumps but can also be used to 'valve-off' two connecting chambers. The next generation of
More informationMini UHV gate valve with manual actuator with pneumatic actuator
Mini UHV gate valve with manual actuator with pneumatic actuator This manual is valid for the valve ordering numbers: 004/8/3/34-. E0/08 004/8/3/34-. E//3/4 004/8/3/34-. E//3/4 004/8/3/34-. E4/4/34/44
More informationProduct data sheet. Series 210, DN (2½ - 6 ) Ordering No PE
Series 210, DN 63 160 (2½ - 6 ) Ordering No. 210..-PE06-000. Manual actuator with hand lever Advantages Three sizes available: DN 63, 100, 160 with ISO-F flanges All vacuum parts made of stainless steel
More informationPendulum valve control system Series 65
Pendulum valve control system Series 65 Series 65.0 Main applications Downstream pressure control and isolation valve for SEMI and FPD processes Optimal for corrosive etching and cleaning processes Ordering
More informationG = basic version A = with SPS H = with PFO C = with SPS and PFO. Ordering number example:
1 with extended control range Downstream pressure control and isolation valve Compact design Fast, virtually particlefree and shockfree operation Highperformance, integrated controller Low minimum controllable
More informationInstallation, Operating & Maintenance Instructions. Series 081, DN (I.D. 2½" - 4") Hot surfaces; do not touch!
Vacuum Gate Valve This manual is valid for the valve ordering number(s): 08136-FA14/24/34/44 08138-FA14/24/34/44 08140-FA14/24/34/44 The fabrication number is indicated on each product as per the label
More informationGateKeeper Aluminum Gate Valves
GateKeeper Aluminum Gate Valves 250 mm Air-Operated 100 mm Air-Operated 63 mm Air-Operated The GateKeeper Series Aluminum Gate Valves are economical, reliable vacuum shut-off devices designed and manufactured
More informationPSG5xx ATM to Medium Vacuum Gauge
The INFICON Standard Gauges,,, PSG510- S and, employ the most advanced digital technology available in themarketplace. The rugged stainless steel sensor cell and compact design qualifythem for use on semiconductor
More informationInstallation, Operating & Maintenance Instructions. UHV gate valve with pneumatic actuator. Series 108 DN mm (I. D. 2½ 8 )
Installation, Operating & Maintenance Instructions UHV gate valve with pneumatic actuator Series 108 DN 63 200 mm (I. D. 2½ 8 ) This manual is valid for the following product ordering numbers: 108.. -.
More informationButterfly valve control system Series 61
utterfly valve control system Series 61 Downstream pressure control valve Very fast operation High-performance, integrated controller ody material aluminum or stainless steel Valve with integrated controller
More informationHV Gate Valve with pneumatic actuator
HV Gate Valve with pneumatic actuator This manual is valid for the valve ordering number(s): 09134-_E14/24/34/44 09136-_E14/24/34/44 09138-_E14/24/34/44 09140-_E14/24/34/44 09144-_E14/24/34/44 The fabrication
More informationType and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
More informationVacuum Valves. Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves
Vacuum Valves Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves 176.01.02 Excerpt from the Product Section Edition December 2011 Contents General The
More informationGlobe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
More informationUHV Angle valve (Series 284) with pneumatic actuator, single acting with closing spring (NC)
UHV Angle valve (Series 84) with pneumatic actuator, single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 84 85 The fabrication number is indicated on each product
More information83000 All Aluminum Gate Valves
All Aluminum Gate Valves Table of Contents Introduction... Page 120... Page 121 Model Key Guide... Page 122 1.5" ID (DN40mm)... Page 123 2.0" ID (DN50mm)... Page 124 2.5" ID (DN63mm)... Page 125 3.0" ID
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationINSTALLATION and OPERATING INSTRUCTIONS
INSTALLATION and OPERATING INSTRUCTIONS UHV-LEAKVALVE ND 3 pneumatically operated NC, 2-positions cylinder. Valve F3CF1616-29 Valve F3CF3516-29 Valve F3VCR-29 Heating Cartridge HF3 Heater Controller HF3-S1
More informationVacuum Valves. Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves
Vacuum Valves Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves 176.01.02 Excerpt from the Product Section C14 Edition July 2007 Contents General The
More informationInstallation, Operating & Maintenance Instructions. Hot surfaces; do not touch!
HV Angle valve (Series 263/265) with manual actuator This manual is valid for the valve ordering number(s): 263/26540-QA/H/E01 263/26544-QA/H/E01 The fabrication number is indicated on each product as
More informationHV Angle valve (Series 264) HV Inline valve (Series 265) with pneumatic actuator, single acting with closing spring (NC)
HV Angle valve (Series 64) HV Inline valve (Series 65) with pneumatic actuator, single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 64 65 The fabrication number
More informationHV-Angle Valve (Series 264) HV-InlineValve (Series 265) with electromagnetic actuator single acting with closing spring (NC)
HV-Angle Valve (Series 264) HV-InlineValve (Series 265) with electromagnetic actuator single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 26... 26428 -K A 61 A..
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationInstallation, Operating & Maintenance Instructions. HV angle valve with pneumatic actuator single acting with closing spring (NC)
Installation, Operating & Maintenance Instructions HV angle valve with pneumatic actuator single acting with closing spring (NC) Series 264 DN 10 50 mm (I. D. ⅜" 2") HV inline valve with pneumatic actuator
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationT 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
More informationVenting valves. Valves. Manually actuated. Venting valves. Installation elements
Installation elements Venting Manually actuated Venting For manually venting small vacuum chambers Valve opens and closes easily by loosening/ tightening the screw cap FVB = Venting valve HA = Manually
More informationVacuum Components C A T A L O G
Vacuum Components C A T A L O G 1 Contents 1 Vacuum valves Angle Valves - 4 Inline Valves - 10 Butterfly & Check Valves - 14 2 s & Fittings Elastomer Seal ISO-KF - 18 Elastomer Seal ISO-LF - 34 Metal Seal
More informationInstallation, Operating & Maintenance Instructions. All-metal gate valve with compact or extended pneumatic actuator
Installation, Operating & Maintenance Instructions All-metal gate valve with compact or extended pneumatic actuator Series 48 DN 16 320 mm (I.D. ⅝" 12") This manual is valid for the following product ordering
More informationValve Solutions Series 150/160 and V-100 Valves
w w w. m k s i n s t. c o m Valve Solutions Series 1/160 and V- Valves High vacuum bellows sealed valves Features and enefits hoice of manual, pneumatic or electropneumatic actuation ngle and Inline body
More informationIsolation Valves. 3.1 General Information. 3.2 N-Series Valves. 3.3 Poppet Valves. 3.4 Ball Valves. 3.5 Genesis Valves & Fittings 1
Section Three 3 3.1 General Information 3.2 N-Series 3.3 Poppet 3.4 all 3.5 Genesis & Fittings 1 3.6 Manual utterfly 3.7 Pendulum 3.8 Linear Gate 3.9 ellowless Poppet & Leak 2 3.10 Valve Heaters 2 3.11
More informationCipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More informationInstallation, Operating & Maintenance Instructions. HV gate valve with pneumatic actuator. Series 110 DN mm (I. D.
Installation, Operating & Maintenance Instructions HV gate valve with pneumatic actuator Series 110 DN 250 320 mm (I. D. 10" 12") This manual is valid for the following product ordering numbers: 11048-.
More informationButterfly valve control system Series 61
utterfly valve control system Series 61 Series 61.2 Main applications Downstream pressure control valve for SEMI, FPD, PV, SOLAR and industrial processes Optimal for fast and demanding processes, e. g.
More informationPUSH PULL DEVICES. Section 03. Introduction to Push Pull Devices 044. Magnetically-coupled devices. MPPRL - Rotary and Linear Motion 046
Section PUSH PULL DEVICES Introduction to Push Pull Devices 044 Magnetically-coupled devices MPPRL - Rotary and Linear Motion 046 MPPL - Linear Guided Motion 048 MPP - Linear Unguided Motion 050 Edge-welded
More informationRight Angle Control Valve 7051
Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium
More informationSPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationControl Gate Valve with stepper motor actuator
Control Gate Valve with stepper motor actuator This manual is valid for the valve ordering numbers: 64036-.E52 and 64040-.E52 The respective product identification is given on each valve in the following
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationGas regulating valve EVR 116, motorized, DN 16 ISO-KF
Gas regulating valve EVR 116, motorized, DN 16 ISO-KF High gas throughput Very broad regulating range With integrated motor control electronics Characteristic Gasflow [mbar l/s] 1000 100 10 1 10-1 10-2
More informationTPR 280, 80 C, DN 16 ISO-KF
TPR 280, 80 C, DN 16 ISO-KF Flange size: DN 16 ISO-KF For general vacuum applications Compact and rugged Maximum pressure refers to inert gases Dimensions Similar Image TPR 280, 80 C, DN 16 ISO-KF Accuracy:
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationPROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
More informationVacuum Valves. Ball Valves. Angle Valves. In-line Valves. Special Valves. Gate Valves. Valve Accessories
Vacuum Valves Ball Valves Angle Valves In-line Valves Special Valves Gate Valves Valve Accessories Contents Introduction Page -3 Ball Valves 2-Way Ball Valves 3-Way Ball Valves Angle Valves Manual Pneumatic
More informationPhoton Shutters. Figure 1. Assembled and exploded view of the photon shutter assembly with main components highlighted.
Photon Shutters This document presents a detailed overview of ADC s beam stop and safety shutter design. Beam stops are designed as high heat load absorpers to provide equipment protection. For applications
More informationC14. Vacuum Valves. Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves.
176.01.02 Excerpt from the Product Section Edition May 2005 Vacuum Valves Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves vacuum Vacuum Valves Contents
More informationQBV SERIES Butterfly Valves
QV SERIES utterfly Valves KEY HIGH VUUM PROUTS, IN.'s QV Series butterfly valves are designed and manufactured to offer reliable performance, be versatile and offer an economic benefit. These valves have
More informationDifferential pressure controller AFP / VFG 2 (VFG 21)
Differential pressure controller AFP / VFG 2 (VFG 21) Description AFP VFG2 (VFG 21) is a self-acting differential pressure controller primarily for use in district heating systems. The controller closes
More informationDifferential pressure controller AFP / VFG 2 (VFG 21)
Differential pressure controller AFP / VFG 2 (VFG 21) Description / Application AFP VFG2 (VFG 21) is a self-acting differential pressure controller primarily for use in district heating systems. The controller
More information3/2 - Way Valve with metal actuator 1/2 up to 1 1/2. Technical Information
3/2 - Way Valve 78 with metal actuator /2 up to /2 Pneumatically operated 3/2-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, data sheet Type 78) ompact design
More informationDifferential pressure controller AFP / VFG 2 (VFG 21)
Differential pressure controller AFP / VFG 2 (VFG 21) Description AFP VFG2 (VFG 21) is a self-acting differential pressure controller primarily for use in district heating systems. The controller closes
More informationStandard Linear Shift Mechanism LSM/HLSM Series
Technical Datasheet Standard Linear Shift Mechanism LSM/HLSM Series Production-proven linear motion along the port axis (Z) for sample positioning and production applications. Comprehensive series offering
More informationHV angle valve with single acting pneumatic actuator and closing spring (NC)
Installation, Operating & Maintenance Instructions HV angle valve with single acting pneumatic actuator and closing spring (NC) Series 264 DN 100 160 mm (I. D. 4 6 ) This manual is valid for the following
More informationARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
More informationNor-Cal Products. where technology takes shape. vacuum products catalog
Nor-al Products where technology takes shape vacuum products catalog s & Fittings Section Two.0 s & Fittings General Information 8. NW s & Fittings 9. ISO s & Fittings 9.3 S s & Fittings 38.4 F s & Fittings
More informationSeries 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
More informationInstruction General Vacuum Valve program
032R9317 032R9317 Contents page 1.Introduction 2.Installation 2.1 Electromagnetically Operated Valve 2.2 Pneumatically Operated Valve 2.3 Manually Operated Valve 1-2 3-4 5-8 9-11 12 1 Introduction This
More informationStandard Linear Shift Mechanism LSM Series
Technical Datasheet Standard Linear Shift Mechanism LSM Series Production-proven linear motion along the port axis (Z) for sample positioning and production applications. Comprehensive series offering
More informationSeries 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
More information-ANSI. maintenance-free. Stop valve with bellows seal,
Stop valve with bellow seal -ANSI ARI-FABA Long Life - Stop valve with bellows seal, maintenance-free ARI-FABA -ANSI Long Life Class 150 with flanges TA-Air (zero emission) TÜV-Test-No. 088-945053 Cast
More informationRotary Plug Valve BR 23e
PTFE-lined Rotary Plug Valve BR 23e Application: PTFE-lined rotary plug valve for aggressive media, especially due to high demands in chemical plants: Nominal diameter: DN 25, DN 50, DN 80 and NPS1, 2,
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
More informationProduct Families. Transfer Door Valves. Transfer Slit Valve Families ARM lock system. lsolation valves. SMART Gate valve Families SMART lock system
Product amilies Transfer oor Valves ock system Vacuum level materials Opening sizes Transfer Slit Valve amilies RM lock system V grade UV grade luminum lloy Stainless steel 304 Stainless steel 304 3xmm
More informationCF Components. Introduction. Functional principle 1-45
Introduction The generation of ultra high vacuum (UHV) makes great demands on the material and on the connections. Therefore the CF standard was created in the UHV technology (ISO 3669; enhancement ISO/TS
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent P Pushbuttons return
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More informationPneumatic Shut-off Butterfly Valve Type 3335/BR 31a
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationFasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges TA
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More informationAngle Seat Valves by Schubert & Salzer
Angle Seat Valves by Schubert & Salzer Angle seat valves contact factory Angle seat valves Angle Seat Valve 7010, reinforced design stainless steel 2" up to 3" 580 psi diaphragm actuator, stainless steel
More informationPneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
More informationPendulum control & isolation valve with extended control range with Logic interface
Pendulum control & isolation valve with extended control range with Logic interface This manual is valid for the valve ordering number(s): 651.. -.. GC -.... (1 sensor input) 651.. -.. GE -.... (2 sensor
More informationPREHEATER BYPASS SYSTEMS
PREHEATER BYPASS SYSTEMS PREHEATER BYPASS SYSTEMS OVERVIEW 2014 GS FEED WATER HEATER BYPASS SYSTEM General Description These valves are designed to bypass high pressure feed water around the pre-heaters
More informationBR 20b Ball valve. PFA-lined. Application: Versions:
PFA-lined BR 20b Ball valve Application: Tight-closing PFA-lined ball valve for (highly) corrosive media, especially with high process demands in chemical plants: Nominal sizes DN 25 to DN 200 Nominal
More informationUHV FEEDTHROUGHS PFI PT1K 1 K CF PFI PT1C 1 C CF PFI
Liquid and electrical feedthroughs are manufactured according to the most UHV process. Careful checking and packaging secure a high reliability and allow being ready to use just after unpacking without
More informationInline Sampling Valves SSV Series, full-port design
SSV: Product Info 81 Inline Sampling Valves, full-port PM 81 M.00 e Inline Sampling Valves SSV Series, full-port design for safe and representative sampling of aggressive or even toxic liquids from pipelines
More informationRemote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
More informationLeader in Vacuum Valves
Leader in Vacuum Valves Vacuum Valve Applications 2 Today s high-tech manufacturing and research often require a reliable, high quality vacuum environment. Applications for vacuum valves include: - Semiconductor
More informationDiaphragm Valve MV 309
Diaphragm Valve MV 309 Benefits compact designed pneumtically operated valve standard with visual position indicator common installation length air connections acc. to NAMUR Application chemical and industrial
More informationInstallation and operating manual Quick closing valve (Bellow sealed) LK product no:
LK product no: 902002 Article no: 74506 Revision: 2 Contents 1. General information... 3 2. Safety precautions... 3 2.1 Significance of symbols... 3 2.2 Explanatory notes on safety information... 3 3.
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More information