3/2-Way Valve DN 15 up to DN 50
|
|
- Claud Fisher
- 5 years ago
- Views:
Transcription
1 /-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated media For temperatures from - C up to + C Working pressure up to 4 bar Versatile actuators Technical Information ody material Stainless steel.448 Nominal sizes DN to DN Connections Pipe thread acc. EN 6 Rp /" - " NPT thread /" - " Nominal pressure PN 4 Max. fluid temperature: with metal bonnet - C up to +7 C, opt. + C with plastic bonnet - C up to + C with diaphragm actuator - C up to + C mbient temperature - C up to +6 C Viscosity of the media maximum 6 mm²/s (6cSt) Options - limit switches inductive proximity switch electrical switch - pilot valve - additional manual operation - version free of oil and grease distributing function: function mixing function: function 4 shut - off function: function 7 actuator normally open: function 6 removeable position indicator bonnet can be rotated as required direct pressure control actuation by air, water, mineral oil and other media head section stainless steel body stainless (.448) bonnet material brass, chrome plated (actuator Ø mm, Ø 8mm), aluminium (actuator Ø mm) exterior lip sealing leak detector PTFE packing piston rod, roller burnished, stainless steel.47 seating seal in PTFE Schubert & Salzer Control Systems mbh, unsenstr. 8, 8 Ingolstadt, Tel: +49 ()84-964, Fax: +49 () info.cs@schubert-salzer.com,
2 /-Way Valve 78 /-Way Valve, Distributing function () ctuator diameter mm 8 6 DN/ spring DN spring 4, 4 4,, 6 /-Way Valve Type 78, function ctuator diameter 8 mm DN/ spring DN spring DN spring DN4 spring 4 6 /-Way Valve Type 78, function ctuator diameter mm DN spring DN spring DN4 springs DN4 spring DN springs DN spring DN springs max. Pilot pressure, function max. Pilot Nominal ctuator size DN Ø mm Springs * pressure (bar) / 9 / , ,7 4 4,9,6 6,6 7,4 4,6 * standard spring configuration spring 4 6 /-Way Valve Type 78, function ctuator diameter mm DN spring DN spring DN4 springs DN4 spring DN springs DN spring ttention: The maximum pilot pressure must not be exceeded since otherwise the piston rod would be damaged. DN springs 4 6 /-Way Valve Type 78, function
3 /-Way Valve 78 /-Way Valve, Mixing function (4) ctuator diameter mm 4 DN/ spring DN spring, 4 4, /-Way Valve Type 78, function 4 ctuator diameter 8 mm DN/ spring, 4 4,, /-Way Valve Type 78, function 4 ctuator diameter mm ctuator diameter mm DN spring DN spring DN4 spring DN springs DN spring DN4 springs DN springs DN spring DN4 spring DN springs 4 /-Way Valve Type 78, function 4 DN spring DN spring DN springs DN4 springs max. Pilot pressure, function 4 Nominal size DN ctuato r Ø mm Springs * max. Pilot pressure (bar) / 9,9 / 8 7, 9,9 8 7,,9 8 7,7, ,7 4 4,9 4 4,4,7 6,6 7,4 8 4,8 * standard spring configuration spring ttention: The maximum pilot pressure must not be exceeded since otherwise the piston rod would be damaged DN4 spring DN springs DN springs 4 /-Way Valve Type 78, function 4
4 /-Way Valve 78 /-Way Valve, ctuator: normally open (6) ctuator diameter mm DN/ DN, 4 4,, 6 /-Way Valve Type 78, function 6 ctuator diameter 8 mm 4 DN/ DN DN DN4,,, 4 4,, /-Way Valve Type 78, function 6 ctuator diameter mm 4 DN DN DN4 DN,,,, 4 4,, /-Way Valve Type 78, function 6 max. Pilot pressure, function 6 Nominal size DN ctuator Ø mm max. Pilot pressure (bar) / 7 / 8 4, , ,, ttention: The maximum pilot pressure must not be exceeded since otherwise the piston rod, or as the case may be, the seating seal would be damaged. ctuator diameter mm DN4 4 Federn springs DN 8 springs 4 /-Way Valve Type 78, function 4 Pilot pressure[bar]
5 /-Way Valve 78 /-Way Valve, shut - off function, spring to close (7) Nominal Size DN Diff. Pressure max. (bar) Pilot pressure (bar) ctuator Ø mm Springs * DN/ 4, - 9,9 D DN/ 7, - D DN,,4 - D DN/, - 7,4 D8 DN, - 7,4 D8 DN 6 4, - 8, D8 DN 4,8-9, D8 DN 8,8-7,8 D8 DN 4,6-8, D8 DN 4,7-9, D8 DN4 4,7-8, D8 DN 6, -,9 D DN4, -, D DN4 8,4 -,9 D DN4, - 4,6 D DN 4,,6-6, D DN 7,4-7,4 D DN 8,, - 4, D 6 DN,8-4,8 D 8 Ordering Number System / V S - 6 : Please quote all 6 sections. 7 - : Quote only if required. Symbol: "V": Valve Type Size "": ctuator (valve without body) "R": Repair kit (sealings). ody type. Connection. ody material 4. Seating seal. Pilot function 6. ctuator /-way, diverting SP-thread acc. stainless PTFE spring closes piston Ømm 4 /-way, mixing EN6/ISO 8 steel.448 (function, 4 and 7 only) piston Ø8mm 6 /-way, spring opens NPT-thread spring opens (function 6 only) piston Ømm 7 /-way, shut-off function double acting C diaphragm D mm 7. Springs Packing. Temperature version. ccessories. Special versions - standard ( spring) - without significance - standard - standard - no accessories S special versions springs H high temperature version electrical position indicator with one switch springs packing electrical position indicator with underneath two switches R 4 springs (D mm) manual emergency operation T 6 springs (D mm) 4 additional manual operation W 8 springs (D mm) stroke limitation 6 pilot valve DN, V C 7 pilot valve DN, 4 V DC K electr. position indicator compact M position indicator with two ind. switch - 6 V DC (PNP) M position indicator with cable bushing N position indicator with plug connection P T position indicator with one ind. switch - 6 V DC (PNP) position indicator compact, inductive - V DC (PNP) Ordering example: 78/V : /- way-valve, DN, body material stainless steel, SP-thread acc. EN 6, seat material PTFE, actuator Ø mm - distributing function, pilot valve DN, 4 V DC
6 /-Way Valve 78 Dimensions and Weights I D I D " DN K E E H " DN K L L Distributing, mixing and shut - off function function, 4 and 7 ctuator: normally open function 6 DN piston Rp/NPT Rp NPT D E H stroke I K L Weight (kg) /" 4, 6 4 /8" 4 4, ,8 8 /" 4, /4" ,4 /4" 6, 6 4 /8" 4 4, 6 9 4,8 8 /4" 6, /4" ,4 " 9, 8 6 /8" 4 4, 6 4, 8 " 9, /4" 4 6 4,8 " 9, 8 46 /4" ,7 8 /4",4 8, /4" ,4 /4",4 8, /4" , 4 8 /",4 8, /4" , 4 /",4 8,4 46 /4" , ", /4" ,4 Dimensions in mm DN Kvs - value diverting function mixing function P- P- P- P- 7,, 7 7, 7, 9,,
7 /-Way Valve 78, reinforced design Dimensions and Weights D /4" K E L Text and pictures are not binding. We reserve the right, to alter the equipment. DN Piston Rp/NPT Rp Distributing, mixing and shut - off function function, 4 and 7 NPT D K L E Stroke Weight (kg) 4 /",4 8, ", , Dimensions in mm Data sheet 78e /Version: 7.8.
3/2-Way Valve DN 15 up to DN 50
/-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated
More information3/2-Way Valve DN 15 up to DN 40
3/-Way Valve 78 DN up to DN Pneumatically operated 3/-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 78) ompact design Unaffected by lightly
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More information3/2 - Way Valve with metal actuator 1/2 up to 1 1/2. Technical Information
3/2 - Way Valve 78 with metal actuator /2 up to /2 Pneumatically operated 3/2-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, data sheet Type 78) ompact design
More informationRight Angle Control Valve 7051
Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium
More information3/2-Way Valve DN 15 up to DN 40. Technical Information. normal function, normally closed. distributing, mixing function and shut - off function
3/2-Way Valve 78 DN 1 up to DN 4 Pneumatically operated 3/2-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 781) Compact design Unaffected
More informationAngle Seat Valve 7010
Angle Seat Valve 7 N 8 up to N 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. ompact design Unaffected by lightly contaminated
More informationStraight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16
Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16 Pneumatically operated straight bodied seat valve for the use in chemical plants, process technology and industrial automation. Unaffected by
More informationAngle Seat Control Valve 7020
Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More information3/2-Way Motor Control Valve 7382 DN 15 up to DN 50
3/2-Way Motor Control Valve 7382 15 up to 50 Fast and high resolution motorvalve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and
More informationControl Valve with integrated positioner
Control Valve 8021 with integrated positioner GS 1 series DN 15 up to DN 150 Pneumatic control valve for the control of neutral through to highly aggressive media in process engineering, chemical industries
More informationHigh Temperature Valve 8024
High Temperature Valve 8024 with integrated positioner GS 3 series DN15 up to DN250 Pneumatic control valve with integrated positioner for the control of neutral through to highly aggressive media Space
More information3/2-Way Motor Valve compact 7280
DN 15 up to DN 40 3/2Way Compact Motor Valve for distributing function, mixing function and modulating operation for neutral and aggressive media Compact design Self calibration Unaffected by lightly contaminated
More informationAseptic Right Angle Valve 6051 with EHEDG-Certification DN 15 up to DN 50
Aseptic Right Angle Valve 6051 with EHEG-Certification 15 up to 50 Pneumatic control valve in right angle design with integrated microporcessor positioner type 8049 or as a shut-off valve for applications
More informationMotor Valve GS 1 series, DN 15 up to DN 150
100 75 50 25 0 Motor Valve 8030 GS 1 series, DN 15 up to DN 150 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant
More informationControl Valve fluids with integrated positioner. GS 3 series - DN 15 up to DN 250. material
Control Valve 8021 with integrated positioner GS 3 series - DN 15 up to DN 250 Pneumatic control valve for the control of neutral and aggressive fluids with integrated positioner Space saving wafer type
More informationMotor Valve GS 1 series, DN 15 up to DN 150
Motor Valve 8036 GS 1 series, DN 15 up to DN 150 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment.
More informationMotor Valve compact 8230
Motor Valve compact 8230 GS 3 series, DN 15 up to DN 50 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment.
More information3/2 - Way Motor Valve 7280
1/2 up to 1 1/2 3/2Way Compact Motor Valve for distributing function, mixing function and modulating operation for neutral and aggressive media Compact design Self calibration Unaffected by lightly contaminated
More informationControl Valve 8021 with integrated positioner
Control Valve 8021 GS 3 series DN 15 up to DN 200 Pneumatic control valve for the control of neutral and aggressive fluids Space saving wafer type construction Lowest possible weight Quiet operation Fast
More informationSeries 810: 2 Way Angle Body Valves: 1/4 to 3 NPT
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up
More informationPressure Regulator compact 8011
Pressure Regulator compact 8011 GS 3 series 1/2 up to 6 Self operated regulation of inlet and outlet pressures of neutral through to highly aggressive media in process engineering, chemical industries
More informationAngle Seat Valves by Schubert & Salzer
Angle Seat Valves by Schubert & Salzer Angle seat valves contact factory Angle seat valves Angle Seat Valve 7010, reinforced design stainless steel 2" up to 3" 580 psi diaphragm actuator, stainless steel
More informationAngle Seat Motor Valve 7210
1/4 up to 2 Motor valve for on/off and modulating operation for neutral and aggressive media. Compact design Self calibration Unaffected by lightly contaminated media or operating temperatures from 22
More informationControl Valve GS 3 series 1/2 up to 10. material
Control Valve 8021 GS 3 series 1/2 up to 10 Pneumatic control valve with integrated positioner for the control of neutral and aggressive fluids. Ideal for steam and flashing liquids. Integral top mount
More informationControl Valve GS 3 series 1/2 up to 10. Materials
Control Valve 8021 GS 3 series 1/2 up to 10 Pneumatic control valve with integrated positioner for the control of neutral and aggressive fluids. Ideal for steam and flashing liquids. Integral top mount
More informationZEUS type BRONZE PNEUMATIC ACTUATED VALVE
CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework. The full bore angle body and the great flow rates permit to have very limited pressure
More informationMotorized Segmented disc valves 5030 DN 25 bis DN 300
Motorized Segmented disc valves 5030 25 bis 300 800 on request Pneumatic control valve for the control of liquids and steam. suitable for contaminated fluids robust design tight in both directions controllable
More informationBall Sector Valve 4040
D 25 up to D 300 D 25 up to D300 High Kvs-values up to 3840 xcellent control characteristics Suitable for abrasive media asily exchangeable seat ring Low maintenance Actuators can be easily fitted fficient
More informationType Operating Instructions. Angle Seat Motor Valve Compact. BM24C, BM24C/I BM24C/IOS, BM230C/IOS with and without spring return
Operating Instructions Angle Seat Motor Valve Compact Type 70 Valid For Actuators: BM4, BM5, BM30, BM4C, BM4C/I BM4C/IOS, BM30C/IOS with and without spring return Version: 08/004 W70e.doc Art.-Nr: 70 Bunsenstrasse
More informationSolenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections
/-way Diaphragm Valve with plastic body, pneumatically operated, 1/ 3 with true union 3 with fl ange pplications with aggressive media Flow optimised body with zero dead volume Self draining installation
More informationFlanged Motor Valve compact DN 15 up to DN
Flanged Motor Valve compact DN 15 up to DN 50 7232 Motor valve for on/off and modulating operation for neutral and aggressive media. Compact design Self adaption Unaffected by lightly contaminated media
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More informationMotor Valve GS 3 series 1/2 up to 10
Motor Valve 8038 GS 3 series 1/2 up to 10 Fast and high resolution motorvalve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for
More informationBRONZE ZEUS PNEUMATIC ANGLE-SEAT VALVE
FEATURES The bronze ZEUS valve is intended for the automatic shutoff of networks of fluids. The full-bore inclined-seat body and the excellent flow-rate coefficients allow for very low pressure drops.
More informationMotor Valve compact 8230
Motor Valve compact 8230 GS 3 series 1/2 up to 2 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment.
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
More informationSTAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
More informationAS-I
Digital Positioner 8049 Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 3-8
More informationGlobe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More informationPNN 320 DN Features. Valve Valve. pistons are Valve. Optically and with. the opened. of the. normally switch (8). Example.
1/11 Hauhinco-2_2-way seat _C3-DN12_125_PN320_X-Y-actuated water s 10/20161 C3 X,Y - actuated PNN 320 DN12 125 Features Hydraulically actuated directional seat controlling liquid media. Actively controllable
More informationExamples 3/2-way valve A T NO: Symbol
1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More informationOperating Instructions. Angle Seat Control Valve. Type 7020
Operating Instructions Angle Seat Control Valve Type 7020 With: Digital Positioner Type 8048 Electro-pneumatic Positioner Type 8047 Pneumatic Positioner Type 8047 Version: 02/2006 Manual-7020e.doc Art.-No:
More informationZEUS type BRONZE PNEUMATIC ACTUATED VALVE. Model/Ref:
ZEUS type BRONZE PNEUMATIC ACTUATED VALVE Model/Ref: 1422203 www.lauridsenindustri.com CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework.
More informationDiaphragm valve MV 309
Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)
More informationwith pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets
with pneumatic actuator Pneumatic process valve, Y-pattern DN 15-50 ARI-STEVI AS 350 - with screwed sockets Piston actuator Required air supply pressure, max. 10 bar Operating pressure, max. 16 bar Page
More informationTechnical Data Sheet
Technical Data Sheet Type 52 2/2-way solenoid valve NC - Valve normally closed (as standard) NO - Valve normally open (as option) Direct operated piston design valve. No differential pressure is necessary
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationPF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBall Sector Valve 4040
DN 5 up to DN 3 DN 5 up to DN3 High Kvsvalues up to 384 xcellent control characteristics Suitable for abrasive media asily exchangeable seat ring Low maintenance Actuators can be easily fitted fficient
More informationBall Sector Valve 4040
DN 5 up to DN 3 DN 5 up to DN3 High Kvsvalues up to 384 xcellent control characteristics Suitable for abrasive media asily exchangeable seat ring Low maintenance Actuators can be easily fitted fficient
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More informationGlobe Valve, Metal. Sectional view
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More informationAndrei Merkulov - Fotolia.com. Schubert & Salzer - Your Partner in the Food and Drink Industry
Andrei Merkulov - Fotolia.com - Your Partner in the Food and Drink Industry Benefit from our experience to increase your success! When it comes to manufacturing or processing medium or gases which are
More informationSTEVI 450 / way control valve in mixing and diverting design DN
STEVI 450 / 451 with electric and pneumatic actuators 3-way control valve in mixing and diverting design DN 15-150 STEVI 450 / 451 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel
More informationHygiene Right Angle Control Valve 6020
N 15 up to N 4 with integrate igital poitioner for application in foo proceing (Type 847, 849) Pneumatic control valve with right angle boy eign an integrate poitioner for application in foo proceing an
More information2/2 or 3/2 way ball valve with pneumatic rotary actuator
2/2 or 3/2 way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationOperating Instructions. Pneumatic Control Valve Low Temperature. Type Series GS3
Operating Instructions Pneumatic Control Valve Low Temperature Type 8026 Series GS3 With: Digital Positioner Type 8048 Electro-pneumatic Positioner Type 8047 Pneumatic Positioner Type 8047 Version: 03/2006
More informationType Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent
More informationValve Series V2001 Three-way Valve Type 3323
Valve Series V2001 Three-way Valve Type 3323 Fig. 1 Type 3323 Valve with mounted rod-type yoke (partial view) Edition January 1999 Mounting and operating instructions E 8113/8114 EN 1. Design and principle
More informationFluid Control System with Quarter-Turn Ball Valve for normal, aggressive and ultra-pure fluids. TOP Control System 265X
TOP Control System 65X /-Way; DN 0...80 mm; Plastic or Stainless Steel dvantages/benefits Decentralized ntelligence for ON/OFF control of processes Customized Fluid Control Systems for Easy LNK and Easy
More informationR690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
More informationBUSCHJOST SERIES
c Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recoended. BUSCJOST 82400 SERIES 2/2 - way valves DN 8... DN 50 For neutral gases and liquids
More information2/2- or 3/2-way- Rocker Solenoid Valve
2/2- or /2-way- Rocker Solenoid Valve Direct acting Hermetic isolation of fluid 0 145 SI 1) DN 2 mm Type 6128 can be combined with... Sub-base, threaded port 22mm width per station Type 2507 Cable lug
More information2/2 and 3/2-way ball valve with pneumatic rotary actuator
2/2 and 3/2-way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow
More information600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
More informationDiaphragm Valve MV 309
Diaphragm Valve MV 309 Benefits compact designed pneumtically operated valve standard with visual position indicator common installation length air connections acc. to NAMUR Application chemical and industrial
More information2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationControl valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250
with electric and pneumatic actuators Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel
More informationRotary Plug Valve BR 23e
PTFE-lined Rotary Plug Valve BR 23e Application: PTFE-lined rotary plug valve for aggressive media, especially due to high demands in chemical plants: Nominal diameter: DN 25, DN 50, DN 80 and NPS1, 2,
More informationDiaphragm pressure gauge guard MDM 902 corrosion-free pressure transmission for aggressive media
Diaphragm pressure gauge guard MDM 902 corrosionfree pressure transmission for aggressive media Application chemical plants electroplating plants Utilisation for corrosionfree pressure transmission between
More informationModular valve block MVB 100/200
Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution
More informationSTEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
More informationSeries 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
More information2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
More informationServo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B
Data sheet Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B EV222B is an indirect servo-operated solenoid valve programme for use in connection with contaminated or aggressive
More information550 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal
Angle Seat lobe Valve, Metal Construction The EMÜ pneumatically operated / way angle seat globe valve has a low maintenance piston actuator. The valve spindle is sealed by a self-adjusting gland packing
More informationPF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
More informationAccessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves
Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More informationGERMAN QUALITY VALVES
The pneumatic Y-pattern process valve: Up to 31% energy saving Excellent value for money Convenient handling Reliable even at high differential pressures: Stays tight for up to 1,000,000 cycles! NEW from
More informationSTEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationAngle seat valve VZXF, NPT
Angle seat valve VZXF, NPT -V- New Angle seat valve VZXF, NPT Key features Function Angle seat valves are externally actuated valves. These valves are actuated by a direct supply of compressed air. In
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More information502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
More informationPneumatic operated 2/2-way Diaphragm Valve
Pneumatic operated 2/2-way Valve Light tube valve body Flow optimised body in stainless steel Zero dead volume Easy to weld Type can be combined with... Type 8640/8644 Type 6012/6014 P Type 8311 Electrical
More informationSelf-operated Pressure Regulators Type Universal Pressure Reducing Valve
Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationPNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
More information2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory
More information