Table of contents. Chapter 1: Fusiotherm. Chapter 4: climasystem Produktgruppe 20. Chapter 5: aquatherm. Chapter 2: aquatherm SHT.

Transcription

1

2

3 Table of contents Chapter 1: Fusiotherm 01 Fusiotherm -pipe 04 climatherm-pipe & aquatherm-lilac 07 Accessories 09 Fittings 15 Weld-in saddle 19 Threaded connections and accessories 22 Transition pieces 26 Screwed connections and counter parts 28 Weld-in saddles, threaded 29 Distributors 30 Valves and accessories Chapter 2: aquatherm SHT 34 pipe 36 accessories 37 Armature connections and accessories 38 Fittings 42 Radiator valves and compression fittings 43 Manifolds and accessories 45 Universal manifolds 48 Radiator connection elements Chapter 3: aquatherm 50 Radiator connection 52 Pipe material wall heating Chapter 4: climasystem Produktgruppe Pipes and fittings 54 Pipe grids 56 dry wall heating elements 57 grids for ceiling panels Chapter 5: aquatherm 59 Pipes and accessories 61 System elements and accessories 64 Heating circuit manifold 66 Valves and accessories 67 Manifold cabinets 68 Controls and accessories 70 Connection systems, thermostats 230 volt (heating) 71 Connection systems, thermostats 24 volt - radio controlled (heating) 72 Connection systems, thermostats 24 volt (heating/ heating and cooling) 73 Connection systems, thermostats 24/230 volt (heating/ heating and cooling) Chapter 6: tools 74 Cutting tools, welding devices 75 Welding machines and welding jig 76 But welding machines & electrofusion device 78 Peeling tools 79 Welding tools 81 Expanding tools 82 Mounting tools 83 Tool cases and accessories Please find further information on

4 aquatherm information climatherm - with oxygen barrier With the redeveloped climatherm faser composite pipe OT, aquatherm launches an oxygen tight pipe, which as the fi rst PP-R pipe worldwide is equipped with an oxygen barrier and thus corresponds to the requirements of DIN The climatherm faser composite pipe OT in combination with the fusiotherm pipe system includes all elements for the pipe installation of chilled, hot fl uid and various industrial applications. Advantages of the climatherm Faser composite pipe OT: oxygen tight by diffusion barrier certified according to DIN 4726 absolutely corrosion resistant less pipe friction high stability high heat-stability high environmental compatibility high impact rate resistant against chemicals heat- and sound insulating characteristics very good welding properties considerably thinner insulation PP-R layer Oxigen barrier More information see page 6 PP-R fiber reinforced aquatherm - lilac - The pipe-system for recycled / reclaimed water Reclaimed and recycled water sources, and rainwater catchment systems are being specifi ed and installed much more frequently as building and plumbing codes are updated to allow this as a means for improving water conservation. The codes will require that the system be kept entirely separate from the potable water supply, and that the piping be color-coded and labeled to identify it as non-potable. The water from these sources can be used for: flush, irrigation, cleaning and laundry. The new aquatherm pipe system lilac has been developed exclusively for these applications. The piping uses the same durable, corrosion-resistant polypropylene material that has been successfully used for hot-and-cold water distribution for over 25 years. This, combined with design modifi cations, coloring, marking, and independent third-party certifi cation by NSF International, make lilac the ideal choice for water conservation. More information see page 4 climasystem - dry wall heating element With the new dry wall heating element aquatherm offers a product, which provides a quick and efficient installation. That means reduced construction time and cost savings. Whether in new buildings or in refurbishing the aquatherm dry wall heating elements release high heat, which means a convenient environment without dust dispersing. Energy savings are possible due to a subjective feeling of warmth though the objective room temperature is lower. The dry lining system consists of 12,5 mm thick system elements made of gypsum fibre with oxygen tight climatherm grids. Assembly occurs with the smooth surface towards the room. After gluing the joints the elements can be painted, wallpapered, flagged or plastered. For simple assembly at the wall or window parapet various sizes of elements are available. Large heating surfaces controllable by heating circuits Energy saving by low mean heating temperature Quick and safe installation More information see page 56

5 Pipes Fusiotherm - pipe SDR 6 Art.-No. Dimension DN Price x 2,7 mm x 3,4 mm x 4,2 mm x 5,4 mm x 6,7 mm x 8,3 mm x 10,5 mm x 12,5 mm x 15,0 mm x 18,3 mm * 16 x 2,7 mm * 20 x 3,4 mm * 25 x 4,2 mm Field of application: see operating pressure tables page 84 Material: PP-R acc. to DIN: DIN 8077/78 DIN EN ISO Register.-No.: DVGW DW-8501 AS2120/AU2224 Form supplied: 4 m straight lengths also* in coils Colour: green Fusiotherm Fusiotherm - pipe SDR 11 Art.-No. Dimension DN Price x 1,9 mm x 2,3 mm x 2,9 mm x 3,7 mm x 4,6 mm x 5,8 mm x 6,8 mm x 8,2 mm x 10,0 mm x 11,4 mm x 14,6 mm x 18,2 mm x 22,7 mm * 20 x 1,9 mm * 25 x 2,3 mm * 32 x 2,9 mm Field of application: see operating pressure tables page 84 Material: PP-R acc. to DIN: DIN 8077/78, DIN EN ISO Register. No.: SKZ A 175 Form supplied: 4 m straight lengths (ø mm), 6 m straight lengths (ø mm), *coils Colour: green with 4 blue stripes 1

6 Fusiotherm Pipes Fusiotherm - pipe SDR 7,4 Art.-No. Dimension DN Price x 2,2 mm x 2,8 mm x 3,5 mm x 4,4 mm x 5,5 mm x 6,9 mm x 8,6 mm x 10,3 mm x 12,3 mm x 15,1 mm * 20 x 2,8 mm Field of application: see operating pressure tables page 84 Material: PP-R acc. to DIN: DIN 8077/78, DIN EN ISO MP 52 (Spec 402) Register.-No.: SKZ A 175/Lic 203 Form supplied: 4 m straight lengths also* in coils Colour: green Fusiotherm - faser composite pipe SDR 7,4 Art.-No. Dimension DN Price x 2,8 mm x 3,5 mm x 4,4 mm x 5,5 mm x 6,9 mm x 8,6 mm x 10,3 mm x 12,3 mm x 15,1 mm x 17,1 mm x 21,9 mm x 27,4 mm x 34,2 mm Material: PP-R Register. No.: SKZ A 314 Form supplied: 4 m straight lengths (ø mm), 6 m straight lengths (ø mm), *coils Colour: green with 4 mossgreen stripes Field of application: see operating pressure tables page 84 2

7 Pipes Fusiotherm - faser composite pipe SDR 7,4 UV Resistant against UV-rays Art.-No. Dimension DN Price x 2,8 mm x 3,5 mm x 4,4 mm x 5,5 mm x 6,9 mm x 8,6 mm x 10,3 mm x 12,3 mm x 15,1 mm x 17,1 mm x 21,9 mm x 27,4 mm Material: PP-R Register.-No.: SKZ A 314 Form supplied: 4 m straight lengths (ø mm), 6 m straight lengths (ø mm), *coils Colour: outer layer: black inner layer: green Fusiotherm x 34,2 mm Field of application: see operating pressure tables page 84 Fusiotherm - stabi composite pipe SDR 7,4 Mechanically stabilized by integrated aluminium compound Art.-No. Dimension DN Price x 2,2 mm x 2,8 mm x 3,5 mm x 4,5 mm x 5,6 mm x 6,9 mm x 8,7 mm x 10,4 mm x 12,5 mm x 15,2 mm * 16 x 2,2 mm Field of application: see operating pressure tables page 84 Material: PP-R, Aluminium acc. to: DVGW W 542 DVGW.-No.: ø mm: DW 8201AT2414 ø mm: DW 8206AT2415 Form supplied: 4 m straight lengths also* in coils Colour: green with evenly structured surface 3

8 Fusiotherm climatherm Pipes aquatherm lilac - pipe SDR 7,4/11 Art.-No. Dimension DN Price SDR 7,4-20 x 2,8 mm SDR 7,4-25 x 3,5 mm SDR x 2,9 mm SDR x 3,7 mm SDR x 4,6 mm SDR x 5,8 mm SDR x 6,8 mm SDR x 8,2 mm SDR x 10,0 mm SDR x 11,4 mm SDR x 14,6 mm SDR x 18,2 mm SDR x 22,7 mm Field of application: see operating pressure tables page 86 NEW Material: PP-R acc. to DIN: DIN 8077/78 DIN EN ISO Register.-No.: cnsfus-rw Form supplied: 4 m straight lengths (ø mm), 6 m straight lengths (ø mm) Colour: lila climatherm - pipe SDR 11 Art.-No. Dimension DN Price Packing unit x 1,9 mm x 2,3 mm x 2,9 mm x 3,7 mm x 4,6 mm x 5,8 mm x 6,8 mm x 8,2 mm x 10,0 mm x 11,4 mm x 14,6 mm * 20 x 1,9 mm * 25 x 2,3 mm * 32 x 2,9 mm Field of application: see operating pressure tables page 86 Material: PP-R acc. to DIN: DIN 8077/78, DIN EN ISO Form supplied: 4 m straight lengths (ø mm), 6 m straight lengths (ø mm), *coils Colour: change to blue, existing stock: blue with small green stripes 4

9 Pipes climatherm - faser composite pipe SDR 7,4/11 Art.-No. Dimension DN Price SDR 7,4-20 x 2,8 mm SDR 7,4-25 x 3,5 mm SDR 7,4-32 x 4,4 mm SDR x 2,9 mm SDR x 3,7 mm SDR x 4,6 mm SDR x 5,8 mm SDR x 6,8 mm SDR x 8,2 mm SDR x 10,0 mm SDR x 11,4 mm SDR x 14,6 mm SDR x 18,2 mm SDR x 22,7 mm Material: Form supplied: Colour: PP-R 4 m straight lengths (ø mm), 6 m straight lengths (ø mm) blue/4 green stripes Fusiotherm Field of application: see operating pressure tables page Dimension ø 315 mm projected climatherm - faser composite pipe SDR 7,4/11 UV Art.-No. Dimension DN Price SDR 7,4-20 x 2,8 mm SDR 7,4-25 x 3,5 mm SDR 7,4-32 x 4,4 mm SDR x 2,9 mm SDR x 3,7 mm SDR x 4,6 mm SDR x 5,8 mm SDR x 6,8 mm SDR x 8,2 mm SDR x 10,0 mm SDR x 11,4 mm SDR x 14,6 mm SDR x 18,2 mm SDR x 22,7 mm Material: Form supplied: Colour: PP-R 4 m straight lengths (ø mm), 6 m straight lengths (ø mm) outer layer: black inner layer: blue Field of application: see operating pressure tables page

10 Fusiotherm pipes climatherm - faser composite pipe OT SDR 7,4/11 oxygen tight by oxygen barrier Art.-No. Dimension DN Price SDR 7,4-20 x 2,8 mm SDR 7,4-25 x 3,5 mm SDR x 2,9 mm SDR x 3,7 mm SDR x 4,6 mm SDR x 5,8 mm SDR x 6,8 mm SDR x 8,2 mm SDR x 10,0 mm SDR x 11,4 mm SDR x 14,6 mm SDR x 18,2 mm SDR x 22,7 mm Field of application: see operating pressure tables page NEW Material: Form supplied:: Colour: acc. to DIN: PP-R 4m straight lengths (ø20-125mm), 6m straight lengths (ø mm), blue/4 green stripes DIN 4726 with oxygen barrier by EVOH-coating Dimension 160, 200, 250 mm available from 3. quarter climatherm - faser composite pipe OT SDR 7,4/11 UV oxygen tight by oxygen barrier Art.-No. Dimension DN Price SDR 7,4-20 x 2,8 mm SDR 7,4-25 x 3,5 mm SDR x 2,9 mm SDR x 3,7 mm SDR x 4,6 mm SDR x 5,8 mm SDR x 6,8 mm SDR x 8,2 mm SDR x 10,0 mm SDR x 11,4 mm SDR x 14,6 mm SDR x 18,2 mm SDR x 22,7 mm Field of application: see operating pressure tables page NEW Material: Form supplied:: Colour: acc. to DIN: PP-R 4m straight lengths (ø20-125mm), 6m straight lengths (ø mm), outer layer: black with grey stripes inner layer: blue DIN 4726 with oxygen barrier by EVOH-coating Dimension 160, 200, 250 mm available from 3. quarter 6

11 Accessories and fittings Fusiotherm - pipe clamps for Fusiotherm, climatherm and aquatherm lilac pipes Packing unit mm mm mm mm mm mm mm mm mm mm mm mm Fusiotherm mm mm 1 12 Suitable for sliding and fixed point installation. Thread connection: M8 & M10 for mm M10 for 160mm M16 for 200 & 250 mm Fusiotherm - pipe clamps for fixed point installation for Fusiotherm, climatherm and aquatherm lilac pipes Packing unit mm mm mm 1 Suitable for fixed point installation. 7

12 Fusiotherm Accessories and fittings Fusiotherm - pipe fastening bow suitable for ø mm pipes single - length = 45 mm single - length = 75 mm double - length = 45 mm double - length = 75 mm Fusiotherm - pipe support for pipes ø 16 x 2,2 mm - ø 11,4 mm for pipes ø 16 x 2,7 mm - ø 10,4 mm Fusiotherm - plastic pipe clamps suitable for ø mm pipes mm mm mm a 8

13 Fittings Fusiotherm - socket mm mm mm mm mm mm mm mm mm mm mm 1 25 Fusiotherm Fusiotherm - reducing socket female/female /50 mm /63 mm /75 mm 1 50 Fusiotherm - elbow mm mm mm mm mm mm mm mm mm mm mm SDR 7,4-160 mm SDR mm SDR 7,4-200 mm SDR mm SDR 7,4-250 mm SDR mm 1 7 9

14 Fusiotherm Fittings Fusiotherm - reducer /16 mm /16 mm /20 mm /20 mm /25 mm /20 mm /25 mm /32 mm /20 mm /25 mm /32 mm /40 mm /20 mm /25 mm /32 mm /40 mm /50 mm /40 mm /50 mm /63 mm /20 mm /25 mm /32 mm /50 mm /63 mm /75 mm /63 mm /75 mm /90 mm /75 mm /90 mm /110 mm SDR 7,4-160/125 mm SDR /125 mm SDR 7,4-200/160 mm SDR /160 mm SDR 7,4-250/200 mm SDR /200 mm

15 Fittings Fusiotherm - elbow 90 female/male mm mm mm mm mm Fusiotherm Fusiotherm - elbow mm mm mm mm mm mm mm mm mm mm mm SDR 7,4-160 mm SDR mm SDR 7,4-200 mm SDR mm SDR 7,4-250 mm SDR mm 1 10 Fusiotherm - elbow 45 female/male mm mm mm mm

16 Fusiotherm Fittings Fusiotherm - T- piece mm mm mm mm mm mm mm mm mm mm mm SDR 7,4-160 mm SDR mm SDR 7,4-200 mm SDR mm SDR 7,4-250 mm SDR mm 1 8 Fusiotherm - red.- T - piece x 16 x 16 mm x 16 x 20 mm x 20 x 16 mm x 25 x 20 mm x 16 x 16 mm x 16 x 20 mm x 16 x 25 mm x 20 x 20 mm x 20 x 25 mm x 16 x 32 mm x 20 x 20 mm x 20 x 32 mm x 25 x 25 mm x 25 x 32 mm x 20 x 40 mm x 25 x 40 mm x 32 x 40 mm x 20 x 50 mm x 25 x 50 mm x 32 x 50 mm x 40 x 50 mm x 20 x 63 mm

17 Fittings Fusiotherm - red.- T - piece x 25 x 63 mm x 32 x 63 mm x 40 x 63 mm x 50 x 63 mm x 20 x 75 mm x 25 x 75 mm x 32 x 75 mm x 40 x 75 mm x 50 x 75 mm x 63 x 75 mm x 32 x 90 mm x 40 x 90 mm x 50 x 90 mm x 63 x 90 mm x 75 x 90 mm x 63 x 110 mm x 75 x 110 mm x 90 x 110 mm x 75 x 125 mm x 90 x 125 mm x 110 x 125 mm SDR 7,4-160 x 75 x 160 mm SDR x 75 x 160 mm SDR 7,4-160 x 90 x 160 mm SDR x 90 x 160 mm SDR 7,4-200 x 75 x 200 mm SDR x 75 x 200 mm SDR 7,4-200 x 90 x 200 mm SDR x 90 x 200 mm SDR 7,4-200 x 110 x 200 mm SDR x 110 x 200 mm SDR 7,4-200 x 125 x 200 mm SDR x 125 x 200 mm SDR 7,4-250 x 75 x 250 mm SDR x 75 x 250 mm SDR 7,4-250 x 90 x 250 mm SDR x 90 x 250 mm SDR 7,4-250 x 110 x 250 mm SDR x 110 x 250 mm SDR 7,4-250 x 125 x 250 mm SDR x 125 x 250 mm 1 12 Fusiotherm 13

18 Fusiotherm Fittings Fusiotherm - cross mm mm mm mm Fusiotherm - end cap mm mm mm mm mm mm mm mm mm mm mm SDR 7,4-160 mm SDR mm SDR 7,4-200 mm SDR mm SDR 7,4-250 mm SDR mm 1 10 Fusiotherm - cross over fitting mm mm mm mm

19 Fittings Fusiotherm - weld-in saddle /20 mm /25 mm /20 mm /25 mm /20 mm /25 mm /32 mm /20 mm /25 mm /32 mm /40 mm /20 mm /25 mm /32 mm /40 mm /20 mm /25 mm /32 mm /40 mm /50 mm /20 mm /25 mm /32 mm /40 mm /50 mm /63 mm /20 mm /25 mm /32 mm /40 mm /50 mm /63 mm /75 mm /90 mm /20 mm /25 mm /32 mm /40 mm /50 mm /63 mm /75 mm 5 With weld-on surface and additional weld-in socket for the fusion with the inner pipe wall The necessary welding tools for the Fusiotherm - weld-in saddles are described on page 79 Weld-in saddle tools Art.-No Chamfering tool (only for stabi composite pipes) Art.-No , 50912, Fusiotherm -drill Art.-No further dimensiones see next page Fusiotherm 15

20 Fusiotherm Fittings Fusiotherm - weld-in saddle /90 mm /110 mm /125 mm /40 mm /50 mm /63 mm /75 mm /90 mm /110 mm /125 mm 5 Fusiotherm - flange adapter with gasket mm mm mm mm mm mm mm mm* mm SDR 7,4-160 mm SDR mm SDR 7,4-200 mm SDR mm SDR 7,4-250 mm SDR mm 1 4 *only applicable with fitting Fusiotherm - plastic coated steel flange Art.-No. Dimension no. of holes hole circle Price mm for Art.-No mm mm for Art.-No mm mm for Art.-No mm mm for Art.-No mm mm for Art.-No mm mm for Art.-No mm mm for Art.-No / mm mm for Art.-No mm mm for Art.-No / mm mm for Art.-No / mm mm for Art.-No / mm

21 Fittings Fusiotherm - coupling screw joint mm mm mm mm mm 1 15 with 2 fl ange adapters including gasket Fusiotherm Fusiotherm - PP-plastic screw joint mm mm mm mm mm mm mm 1 Fusiotherm - electrofusion socket mm mm mm mm mm mm mm mm mm mm mm 1 10 Tools: Fusiotherm -electrofusion device (Art.-No ) Fusiotherm -peeling tool (Art.-No ) On working with Fusiotherm -stabi composite pipes a special peeling tool has to be used. 17

22 Fusiotherm Fittings and accessoires Fusiotherm - back plate elbow mm x 1/2 f mm x 1/2 f mm x 3/4 f mm x 3/4 f mm x 1/2 f Mounting plate galvanized; to fix back plate elbows as double connection /150/80 mm not suitable for connection with sound insulation plate (Art.-No ). We recommend mounting rail Art.-No Mounting rail galvanized; to fix back plate elbows including 2 fixing plates and 4 screws length = 560 mm Fusiotherm - sound isolation cover for Fusiotherm -back plate elbow 1/ Thickness approx. 5 mm 1 60 aquatherm SHT - sound isolation plate for Fusiotherm - and aquatherm SHT -back plate elbow suitable for mounting rail Art.-No Mounting rail (double and single) double single 2 20 galvanized, for fixing of back plate elbows 18

23 Threaded connections and accessories Fusiotherm - dry construction wall fitting / Fusiotherm Fusiotherm - back plate elbow for dry construction mm x 1/2 f mm x 1/2 f Fusiotherm - transition piece with counternut, gasket and tension washer mm x 1/2 f x 3/4 m e.g. for connection of a cistern or application with mounting plate (Art.-No ) Fusiotherm - transition elbow with counternut, gasket and tension washer mm x 1/2 f x 3/4 m mm x 1/2 f x 3/4 m mm x 1/2 f x 3/4 m e.g. for connection of a cistern or application with mounting plate (Art.-No ) 19

24 Fusiotherm Fittings and accessories Fusiotherm - plug for pressure tests with gasket /2 m /4 m Fusiotherm - assembling jig as water level with 2 plugs 1/ aquatherm Fusiotherm - mounting unit double /100/150 mm Fusiotherm - mounting unit single

25 Threaded connections and accessories Fusiotherm - mounting unit with two Fusiotherm transition elbows (Art.-No ) with counternut, gasket and tension washer Fusiotherm Fusiotherm - mounting unit with one Fusiotherm transition elbow (Art.-No ) with counternut, gasket and tension washer Fusiotherm - transition elbow for plasterboard mm x 1/2 f x 3/4 m with 30 mm thread, counternut, gasket and tension washer 21

26 Fusiotherm Transition pieces Fusiotherm - transition elbow round mm x 1/2 f mm x 1/2 f mm x 3/4 f mm x 1/2 f mm x 3/4 f mm x 3/4 f Fusiotherm - transition piece with female thread hex shaped threaded transition mm x 1/2 f mm x 1/2 f mm x 3/4 f mm x 1/2 f mm x 3/4 f mm x 3/4 f mm x 1 f mm x 1 f mm x 1 1/4 f mm x 1 1/4 f mm x 1 1/2 f mm x 1 1/2 f mm x 2 f mm x 2 f 1 25 Fusiotherm - transition piece with male thread round, self sealing mm x 1/2 m mm x 1/2 m mm x 3/4 m Note: Fusiotherm -metal compound fittings are manufactured from fusiolen PP-R and brass. Metal inserts, without hex shaped spanner fl at, with 1/2 and 3/4 f are also available in stainless steel. Fusiotherm stainless steel price list Order-. No.: E53180 on request!! 22

27 Transition pieces Fusiotherm - transition piece round mm x 1/2 m mm x 1/2 m mm x 3/4 m mm x 1/2 m mm x 3/4 m mm x 3/4 m Fusiotherm Fusiotherm - transition piece with male thread with hex shaped threaded transition mm x 1/2 m mm x 1/2 m mm x 3/4 m mm x 3/4 m mm x 1 m mm x 1 1/4 m mm x 1 m mm x 1 1/4 m mm x 1 1/4 m mm x 1 1/2 m mm x 1 1/2 m mm x 2 m mm x 2 m mm x 2 1/2 m mm x 3 m mm x 4 m 1 8 Fusiotherm - transition piece with male thread self-sealing, with hex shaped threaded transition Fusiotherm - transition piece with male thread self-sealing, with hex shaped threaded transition mm x 1/2 m mm x 1/2 m mm x 1/2 m

28 Fusiotherm Transition pieces Fusiotherm - transition elbow with female thread mm x 1/2 f mm x 3/4 f mm x 1/2 f mm x 3/4 f mm x 1/2 f mm x 3/4 f mm x 1 f Fusiotherm - transition elbow with female thread female/male mm x 1/2 f Fusiotherm - transition elbow with male thread mm x 1/2 m mm x 1/2 m mm x 3/4 m mm x 3/4 m mm x 3/4 m mm x 1 m Fusiotherm - threaded branch tee with female thread x 1/2 f x 16 mm x 1/2 f x 20 mm x 3/4 f x 20 mm x 1/2 f x 25 mm x 3/4 f x 25 mm x 1/2 f x 32 mm x 3/4 f x 32 mm x 1 f x 32 mm x 1 f x 50 mm

29 Transition pieces Fusiotherm - threaded branch tee with male thread x 1/2 m x 20 mm Fusiotherm Fusiotherm - transition coupling with male thread with union nut and welding socket mm x 1/2 m mm x 3/4 m mm x 1 m mm x 1 1/4 m mm x 1 1/2 m mm x 2 m 1 35 Fusiotherm - transition coupling with female thread with union nut and welding socket mm x 1/2 f mm x 3/4 f mm x 1 f mm x 1 1/4 f mm x 1 1/2 f mm x 2 f 1 50 Fusiotherm - loose nut adapter length: 100 mm, with gasket mm x nut R mm x nut R 1 1/ mm x nut R 1 1/ mm x nut R mm x nut R 2 1/ mm x nut R 2 3/ mm x nut R 3 1/ mm x nut R Note: Fusiotherm -metal compound fittings are manufactured from fusiolen PP-R and brass. Metal inserts, without hex shaped spanner fl at, with 1/2 and 3/4 f are also available in stainless steel. Fusiotherm stainless steel price list Order-. No.: E53180 on request!! 25

30 Fusiotherm Screwed connections and counter parts Fusiotherm - water meter nut adapter with gasket mm x nut R 3/ mm x nut R 3/ mm x nut R 3/ Fusiotherm - nut adapter ISO-standard mm x nut R mm x nut R mm x nut R 1 1/ mm x nut R 1 1/ mm x nut R 1 1/ mm x nut R 1 1/ mm x nut R mm x nut R mm x nut R 2 1/ mm x nut R 2 1/ mm x nut R 2 3/ mm x nut R 2 3/ mm x nut R 3 1/ Fusiotherm - counterpart with welding socket and male thread for ISO-standard adapter mm x 1 m mm x 1 m mm x 1 1/4 m mm x 1 1/4 m mm x 1 1/2 m mm x 1 1/2 m mm x 2 m mm x 2 m mm x 2 1/4 m mm x 2 1/4 m mm x 2 3/4 m mm x 2 3/4 m mm x 3 1/2 m 1 30

31 Screwed connections and counter parts Fusiotherm - brass counterpart with female thread, for ISO-standard adapter / loose nut adapter m x 1/2 f /4 m x 3/4 f /2 m x 1 f m x 1 1/4 f /4 m x 1 1/2 f /4 m x 2 f /2 m x 2 1/2 f m x 3 f 1 25 Fusiotherm Fusiotherm - brass counterpart with male thread, for ISO-standard adapter / loose nut adapter m x 1/2 m /4 m x 3/4 m /2 m x 1 m m x 1 1/4 m /4 m x 1 1/2 m /4 m x 2 m /2 m x 2 1/2 m m x 3 m 1 10 Note: Fusiotherm -metal compound fittings are manufactured from fusiolen PP-R and brass. Metal inserts, without hex shaped spanner fl at, with 1/2 and 3/4 f are also available in stainless steel. Fusiotherm stainless steel price list Order-. No.: E53180 on request!! 27

32 Fusiotherm Weld-in saddle Fusiotherm - weld-in saddle with female thread /25 mm x 1/2 f /25 mm x 1/2 f /25 mm x 1/2 f /25 mm x 1/2 f /25 mm x 1/2 f /25 mm x 1/2 f /25 mm x 1/2 f /25 mm x 1/2 f /25 mm x 1/2 f /25 mm x 3/4 f /25 mm x 3/4 f /25 mm x 3/4 f /25 mm x 3/4 f /25 mm x 3/4 f /25 mm x 3/4 f /25 mm x 3/4 f /25 mm x 3/4 f /25 mm x 3/4 f with hex shaped female thread, weld-in surface and weld-in socket for fusion with the inner wall of the pipe. The necessary tools for the fusion of Fusiotherm weld-in saddles are listed on page 79. Weld-in saddle tools Art.-No Chamfering tools (only for stabi composite pipe) Art.-No Fusiotherm -drill Art.-No /32 mm x 1 f /32 mm x 1 f /32 mm x 1 f /32 mm x 1 f /32 mm x 1 f /32 mm x 1 f 5 25 Fusiotherm - weld-in saddle with male thread /25 mm x 1/2 m /25 mm x 1/2 m /25 mm x 1/2 m /25 mm x 1/2 m /25 mm x 1/2 m /25 mm x 1/2 m /25 mm x 1/2 m Like Art.-No , but with male thread /25 mm x 1/2 m /25 mm x 3/4 m /25 mm x 3/4 m /25 mm x 3/4 m /25 mm x 3/4 m /25 mm x 3/4 m /25 mm x 3/4 m /25 mm x 3/4 m /25 mm x 3/4 m

33 T-Stück T-Stück Distributors Fusiotherm - distribution block plumbing including 1 plug and 2 fastenings /25 mm 1 50 Passage: 25 mm (socket)/ 2 branches: 20 mm (socket) Fusiotherm Fusiotherm - distribution block plumbing with insulation block /25 mm 1 30 Like Art.-No , but with insulation block - height = 70 mm Fusiotherm - four-port manifold length: 246 mm, with 4 branches mm x 16 mm mm x 20 mm The four-port manifold can be shortened or extended by fusion with further four-port manifolds, if required. Fusiotherm - manifold end piece with female thread* mm x 1/2 f *Fusiotherm - transition piece as manifold endpiece with female thread Note: Fusiotherm -metal compound fittings are manufactured from fusiolen PP-R and brass. Metal inserts, without hex shaped spanner fl at, with 1/2 and 3/4 f are also available in stainless steel. Fusiotherm stainless steel price list Order-. No.: E53180 on request!! 29

34 Fusiotherm Valves and accessories Fusiotherm - ball valve for manifold female/male mm 2 50 Fusiotherm - supporting strap for four-port manifold with clamps, galvanized, double for ø 32 mm Fusiotherm - globe valve for surface installation mm mm mm mm 1 35 Fusiotherm - concealed valve chromium plated mm mm mm

35 Valves and accessories Fusiotherm - concealed valve tamper proof/ chromium-plated/ short design mm mm mm 1 30 Art.-No : suitable for construction depth up to 25 mm Art.-No : suitable for construction depth up to 30 mm Fusiotherm Fusiotherm - concealed valve chromium-plated mm mm mm 1 20 suitable for construction depth of 55 mm to 100 mm Fusiotherm - concealed valve tamper proof, chromium-plated mm mm mm 1 40 suitable for construction depth up to 60 mm Fusiotherm - extension for Fusiotherm concealed valve chromium-plated for Art.-No length = 92 mm length = 132 mm

36 Fusiotherm Valves and accessories Fusiotherm - stop valve body mm x 3/4 f mm x 3/4 f mm x 1 f mm x 1 1/4 f 1 50 Fusiotherm - inclined valve without drain mm mm mm mm 1 25 Fusiotherm - non-return valve without drain mm mm mm mm 1 25 Fusiotherm - ball valve PP/brass mm mm mm mm mm mm

37 Valves and accessories Fusiotherm - extension for fusiotherm-ball valve for Art.-No / length = 35 mm for Art.-No / length = 35 mm for Art.-No / length = 46 mm 1 75 Fusiotherm Fusiotherm - PP-ball valve with union nut and welding socket Art.-No. Dimension DN Price mm mm mm mm mm mm mm Fusiotherm - PP-ball valve with fl ange connection on both sides Art.-No. Dimension DN Price mm mm mm mm For connection with Fusiotherm -weldable fl ange adapter (Art.-No ) and Fusiotherm plastic coated steel fl ange (Art.-No ) Fusiotherm - draining branch to weld in Fusiotherm valves mm mm mm mm mm mm

38 Pipes aquatherm SHT aquatherm SHT - potable water and radiator connection pipe in corrugated pipe, with oxygen barrier x 2,0 mm x 2,0 mm 50 Material: PB Application field: Potable water/heating Colour: grey Continous working temp.: 70 C Form supplied: ring DVGW-Registr.-No.: DW-8501 AU2075 (incl. fittings) Material corrugated pipe: PE according to: DIN 4726/4727/16968 Colour corrugated pipe: green with oxygen barrier by EVOH-coating aquatherm SHT - potable water and radiator connection pipe with insulation, with oxygen barrier x 2,0 mm x 2,0 mm 50 Material: PB Application field: Potable water/heating Colour: grey Continous working temp.: 70 C Form supplied: ring DVGW-Registr.-No.: DW-8501 AU2075 (incl. fittings) Insulation: 10 mm according to: DIN 4726/4727/16968 with oxygen barrier by EVOH-coating aquatherm SHT PB-Rohr aquatherm SHT - potable water and radiator connection pipe with oxygen barrier x 2,0 mm x 2,0 mm x 2,3 mm in Stangen a 4 m x 2,0 mm Material: PB Application field: Potable water/heating Colour: ecru Continous working temp.: 70 C Form supplied: ring/straight lengths DVGW-Registr.-No.: DW-8501 AU2075 (incl. fittings) according to: DIN 4726/4727/16968 with oxygen barrier by EVOH-coating aquatherm -SHT PB-Rohr 34

39 Pipes aquatherm SHT - multi layer metal composite pipe with oxygen barrier x 2,4 mm x 2,4 mm in Stangen a 4 m x 2,4 mm x 2,4 mm x 2,7 mm x 3,2 mm x 3,5 mm Material: PEX Application field: Potable water/heating Colour: white Continous working temp.: 70 C Form supplied: ring/straight lengths DVGW-Registr.-No.: DW-8217 AT2505 according to: DIN 4726 oxygen barrier Please apply only the suitable expanding tools Art.-No for the multi layer metal composite pipe. aquatherm -SHT Mehrschicht-Metallverbund aquatherm SHT aquatherm SHT - multi layer metal composite pipe with compact insulation cover and oxygen barrier mm - insulation 10 mm mm - insulation 20 mm mm - insulation 10 mm mm - insulation 20 mm 50 Material: PEX Application field: Potable water/heating Colour: white Continous working temp.: 70 C Form supplied: ring DVGW-Registr.-No.: DW-8217 AT2505 according to: DIN 4726 oxygen barrier Insulation value acc. to: DIN and ENEV aquatherm -SHT Mehrschicht-Metallverbund Please apply only the suitable expanding tools Art.-No for the multi layer metal composite pipe. 35

40 Pipes, accessories aquatherm SHT aquatherm SHT - radiator connection pipe PE-RT with insulation, with oxygen barrier x 2,0 mm x 2,0 mm 50 Material: PE-RT Application field: Potable water/heating Colour: red Continous working 70 C Form supplied: ring according to: DIN 4721/4726/16833 Insulation: grey, 10 mm with oxygen barrier by EVOH-coating aquatherm SHT - corrugated pipe for pipe 16 mm for pipe 20 mm 50 Material: PE Colour: green Form supplied: ring aquatherm SHT - end sleeve for corrugated pipe for corrugated pipe 16 mm - Art red for corrugated pipe 20 mm - Art blue for corrugated pipe 16 mm - Art red for corrugated pipe 20 mm - Art blue Material: PE Colour: red/blue aquatherm SHT - snap in radius support for pipes 16 & 17 mm for pipe 20 mm Material: PE Colour: black 36

41 Armature connections and accessories aquatherm SHT - concealed stop valve including sliding sleeve mm 1 8 suitable for construciton depth from 55 mm mm aquatherm SHT - back plate elbow mm x 1/2 f mm x 3/4 f mm x 1/2 f mm x 3/4 f 2 60 Material: PPSU/brass including acustic panel (PP) proper to sound isolation plate Art.-No aquatherm SHT aquatherm SHT - insulation cover for Art.-No Thickness = 5 mm Material: PE aquatherm SHT - sound isolation plate for Fusiotherm - and aquatherm SHT concealed back plate elbow suitable with the mouning rail Art.-No Mounting rail length= 560 mm galvanized, for assembly of back plate elbow, including 2 fixing plates and 4 screws Mounting rail (twin and single) twin single 2 20 galvanized, for fixing of back plate elbows 37

42 Armature connections and fittings aquatherm SHT - back plate elbow, twin including sliding sleeves mm x 1/2 f 1 60 Material: brass including acustic panel (PP) aquatherm SHT aquatherm SHT - connecting elbow for concealed flushing box including sliding sleeve mm x 1/2 f x 3/4 length: 15 mm 1 70 Material: brass including counternut, gasket and spring washer aquatherm SHT - transition elbow including sliding sleeve mm x 1/2 m mm x 1/2 m mm x 3/4 m mm x 3/4 m mm x 3/4 m mm x 1 m mm x 1 1/4 m 1 Material: brass aquatherm SHT - connecting elbow for dry construction, including sliding sleeve mm x 1/2 f x 3/4 m, length: 30 mm 2 25 Material: brass including counternut, gasket and 2 spring washers aquatherm SHT - tee including sliding sleeves mm mm mm mm mm 2 Material: PPSU/brass

43 Fittings aquatherm SHT - reducing tee including sliding sleeve x 20 x 16 mm x 16 x 16 mm x 16 x 20 mm x 20 x 16 mm x 20 x 25 mm x 20 x 20 mm x 20 x 16 mm x 16 x 25 mm x 16 x 20 mm x 25 x 20 mm x 32 x 20 mm x 32 x 25 mm x 16 x 32 mm x 20 x 20 mm x 20 x 32 mm x 25 x 25 mm x 25 x 32 mm x 32 x 20 mm x 32 x 25 mm x 16 x 25 mm x 25 x 20 mm x 20 x 25 mm x 16 x 20 mm x 25 x 40 mm x 25 x 40 mm x 32 x 40 mm 1 Material: PPSU/brass aquatherm SHT aquatherm SHT - tee with female thread including sliding sleeve x 1/2 f x 16 mm x 1/2 f x 20 mm x 1/2 f x 25 mm x 3/4 f x 25 mm x 1/2 f x 32 mm x 3/4 f x 32 mm x 1 f x 40 mm 1 Material: brass 39

44 Fittings aquatherm SHT aquatherm SHT - transition piece with female thread, including sliding sleeve mm x 1/2 f mm x 1/2 f mm x 3/4 f mm x 3/4 f mm x 3/4 f mm x 1 f mm x 1 1/4 IG 1 Material: brass aquatherm SHT - transition piece with male thread, including sliding sleeve mm x 1/2 m mm x 1/2 m mm x 3/4 m mm x 3/4 m mm x 1/2 m mm x 3/4 m mm x 1 m mm x 1 1/4 AG 2 material: brass aquatherm SHT - coupling including sliding sleeves aquatherm SHT - euroconus adapter including sliding sleeve mm mm mm mm mm mm 1 Material: brass mm x nut 3/ mm x nut 3/ Material: brass for customary manifolds/joints 40

45 Fittings aquatherm SHT - transition screw joint including sliding sleeve and gasket mm x nut 3/ mm x nut mm x nut 3/ mm x nut mm x nut 1 1/ mm x nut 1 1/2 1 Material: brass aquatherm SHT - reducing coupling including sliding sleeve /16 mm /20 mm /16 mm /25 mm /20 mm /16 mm /32 mm 1 Material: brass aquatherm SHT aquatherm SHT - elbow 90 including sliding sleeve mm mm mm mm mm 1 Material: PPSU/brass aquatherm SHT - elbow 45 including sliding sleeve mm mm mm mm 1 Material:PPSU/brass 41

46 Radiator valves and compression fittings aquatherm SHT aquatherm SHT - radiator valve Passage 3/4 euroconus Corner form 3/4 euroconus 1 30 Material: brass aquatherm SHT - compression fitting for ø 16 mm plastic pipe for ø 16 mm 16 mm metal composite pipe 2 80 Material: brass Please use these compression fittings in conjunction with the multi layer metal composite pipes ONLY with the suitable expanding tool Art.-No

47 Manifolds and accessories aquatherm SHT - ball valve for SHT manifold female/male mm f/m 2 50 Material: PP-R/brass aquatherm SHT - four-port manifold 4 branches with sliding sleeve connection including sliding sleeves Ø 32 mm - 4 branches 16 x 2,0 mm 2 50 Material: PP-R/brass Colour: green aquatherm SHT aquatherm SHT - four-port manifold 4 branches Ø 32 mm - 4 branches f 18 x 1,5 mm for screwed insert Material: PP-R/brass Colour: green Sliding sleeve connections have to be ordered separately 2 50 aquatherm SHT - sliding sleeve connections for manifold branches including sliding sleeves screwed insert m 18 x 1,5 mm with sliding sleeve connection 16 x 2,0 mm screwed insert m 18 x 1,5 mm with sliding sleeve connection 20 x 2,0 mm Material: brass

48 Accessories aquatherm SHT - blind plug for manifold branches x 1,5 mm Material: brass aquatherm SHT aquatherm SHT - end cap mm Material: PP-R Colour: green aquatherm SHT - manifold end piece with female thread* mm x 1/2 f Material: PP-R/brass Colour: green *aquatherm SHT- transition piece as manifold endpiece with female thread Supporting strap for four-port manifold with clamps, galvanized, double for Ø 32 mm

49 Universal manifolds aquatherm SHT - universal manifold triple with water meter connecting union including sliding sleeves nut G 3/4 triple (16 mm) nut G 1 triple (16 mm) 1 10 Material: PP-R/brass Colour:green aquatherm SHT - universal manifold fourfold with water meter connecting union including sliding sleeves nut G 3/4 fourfold (16 mm) nut G 1 fourfold (16 mm) 1 8 aquatherm SHT Material: PP-R/brass Colour:green aquatherm SHT - universal manifold fivefold with water meter connecting union including sliding sleeves nut G 3/4 fivefold (16 mm) 1 8 Material: PP-R/brass Colour:green 45

50 Manifolds and accessories aquatherm SHT aquatherm SHT - distribution block with sliding sleeve connection including sliding sleeves /16/20 mm /20/16 mm /16/16 mm /20/16 mm /16/16 mm /20/20 mm 1 10 * applicable as distribution end block, including 2 end plugs Material: PP-R/brass Colour green for cross-free installations, flow rate: 10 kw, Temperature: 70/50 C Insulation for the aquatherm SHT distribution block height: 50 mm 1 15 Material: PPO/PS 46

51 Accessories aquatherm SHT - end piece for manifold and distribution blocks mm - length = 100 mm Material: PB aquatherm SHT - adapter to Fusiotherm -fittings including sliding sleeve Fusiotherm 20 mm x SHT 16 mm Fusiotherm 20 mm x SHT 20 mm Fusiotherm 25 mm x SHT 20 mm Fusiotherm 25 mm x SHT 25 mm Fusiotherm 32 mm x SHT 25 mm Fusiotherm 32 mm x SHT 32 mm Fusiotherm 40 mm x SHT 32 mm 1 20 aquatherm SHT aquatherm SHT - weld-in saddle adapter including sliding sleeve Fusiotherm 40 mm x SHT 16 mm Fusiotherm 40 mm x SHT 20 mm Fusiotherm 50 mm x SHT 16 mm Fusiotherm 50 mm x SHT 20 mm Fusiotherm 63 mm x SHT 16 mm Fusiotherm 63 mm x SHT 20 mm 2 50 one side for saddle welding - one side for sliding sleeve connection Material: PP-R/brass aquatherm SHT - spare sliding sleeve mm mm mm mm mm 10 Material: brass 47

52 Radiator connection elements aquatherm SHT aquatherm SHT - connecting bend* SHT-pipe connection and radiator connection 16 x 2,0 mm height= 340 mm length = 200 mm SHT-pipe connection and radiator connection 16 x 2,0 mm height= 200 mm length = 200 mm with sliding sleeve connection including sliding sleeves and one fastening plug Pipe spacing: 50 mm Material: PP-R/brass Colour: white for radiator connections coming out of the wall * by welding at site, in conjunction with aquatherm SHT-connecting bend (Art.-No ) 1 1. Art.-No.: Art.-No.: ESScreed aquatherm SHT - connecting bend* SHT-pipe connection and radiator connection 16 x 2,0 mm height= 340 mm length = 45 mm SHT-pipe connection and radiator connection 16 x 2,0 mm height= 200 mm length = 45 mm with sliding sleeve connection including sliding sleeves and one fastening plug Pipe spacing: 50 mm Material: PP-R/brass Colour: white

53 Radiator connection elements aquatherm SHT - metal connecting bend SHT-pipe connection 16 x 2,0 mm radiator connection 15 x 1,0 mm height = 350 mm length = 65 mm 1 20 with sliding sleeve connection including sliding sleeves. Pipe spacing: 50 mm Material: copper nickel-plated aquatherm SHT - radiator-t-connecting set SHT-pipe connection 16 x 2,0 mm radiator connection 15 x 1,0 mm height = 350 mm SHT-pipe connection 20 x 2,0 mm radiator connection 15 x 1,0 mm height = 350 mm aquatherm SHT with sliding sleeve connections including sliding sleeves Material: copper nickel-plated aquatherm SHT - radiator connecting set SHT-pipe connection and radiator connection 16 x 2,0 mm height= 260 mm length = 200 mm SHT-pipe connection and radiator connection 16 x 2,0 mm height= 180 mm length = 200 mm with sliding sleeve connection including sliding sleeves Material: PP-R/brass Pipe spacing: 50 mm Colour: white aquatherm SHT - double rosette, retractable for Ø up to 17,5 mm to cover connection pipes coming out of the floor covering Material: PA Pipe spacing: 50 mm Colour: white 49

54 Radiator connection aquatherm - connecting bend mm 1 50 Length: 350 mm Including 2 sliding sleeves (Ø 11,7 mm) and 1 fastening plug Material: PP-R Colour: white Connection with two 16 mm welding tools (Art.-No ) Suitable distances for fixing at the welding device (Art.-No ) are available aquatherm aquatherm - connecting bend mm Length: 200 mm Including 2 sliding sleeves (Ø 11,7 mm) and 1 fastening plug Material: PP-R Colour: white Connection with two 16 mm welding tools (Art.-No ) Suitable distances for fixing at the welding device (Art.-No ) are available aquatherm - connecting bend mm Length: 200 mm Including 1 fastening plug Material: PP-R Colour: white Connection with two 16 mm welding tools (Art.-No ) Suitable distances for fixing at the welding device (Art.-No ) are available aquatherm - distribution block for skirting or fl oor installation /16 mm 1 15 Passage 20 mm, 2 branches, including 1 plug 20 mm Material: PP-R Colour:green Double welding with welding-device (Art.-No ) in connection with two 16 mm and two 20 mm tools is possible. 50

55 Radiator connection aquatherm -red-nipple /2 m x 3/4 m for the connection of radiator valves with compact valve radiators with connection 1/2 F aquatherm - protection sleeve for Ø mm for protection of connection pipes of vertical radiator connection (from the floor) made of PP-R - Colour: green Pipe spacing: 50 mm aquatherm - radiator connection set mm with nut G 3/ consisting of: 2 connection pieces (L: 120 mm) made of PP-R, Colour: white 2 metal tension rings 2 nuts, chromium plated 2 adaptors, chromium plated 2 gaskets aquatherm - radiator connection piece with hex shaped threaded connection mm x 1/2 m Material: PP-R brass thread Colour: white aquatherm 51

56 Pipe material wall heating aquatherm - surface heating pipe (PB) with oxygen barrier acc. to DIN x 1,25 mm 250 Material: PB with EVOH coating with oxygen barrier acc. to DIN 4726/4727/16968 Colour: grey aquatherm - profile rail for wall and surface heating for pipe ø 10 mm 2 32 Material: polyamide aquatherm aquatherm - coupling for wall and surface heating mm Material: polyamide aquatherm - reducer tee including sliding sleeve x 10 x 10 mm x 10 x 16 mm 1 50 Material: PPSU aquatherm - transition piece, male including sliding sleeve x 1,25 mm x 3/ x 1,25 mm x 1/ Material: brass Manifolds, compression fitings and control technique from page

57 aquatherm Heizung & Klima Pipes and fittings climasystem - PP-grid connection pipe with oxygen barrier, in 2,5 m lengths mm mm aquatherm Heizung & Klima aquatherm Heizung & Klima climasystem - PP-grid connection pipe with oxygen barrier, in ring mm mm 100 climasystem - socket for heating and cooling grids mm climasystem - elbow 90 for heating and cooling grids mm climasystem climasystem - end cap for heating and cooling grids mm climasystem - elbow 90 male/female mm

58 Pipe Grids Types of connection climasystem - heating and cooling grids 1a 1. Wall heating grids with axial connection. 1a 1b Art.-No. starting with 50 a. Type of joining: socket for welding of 16 mm pipes or for welding with nozzle 1b of another grid 1b b. Type of joining: nozzle vor welding with end cap or directly with socket 1a of another grid 1b 1a 2 2. Ceiling cooling and heating grid for suspended metal ceiling panels with 35 plug connection top left and down right 2 Art.-No. starting with 51 2 climasystem 3 3. Ceiling cooling and heating grid for suspended metal ceiling panels with 35 plug connection top right and down left Art.-No. starting with Ceiling cooling and heating grid for suspended metal ceiling panels with 90 plug connection top left and down right 4 Art.-No. starting with Ceiling cooling and heating grid for suspended metal ceiling panels with 90 plug connection top right and down left Art.-No. starting with 53 5 Structure of the new article-numbers e. g = Wall heating grid, axial, 24 cm wide, 150 cm long Type of connection Width Length = wall heating grid AX 51 = ceiling cooling and heating 35 connection TL 57 = ceiling cooling and heating 35 connection TR 52 = ceiling cooling and heating 90 connection TL 53 = ceiling cooling and heating 90 connection TR Width of grid Width from 24 cm to 100 cm in 4 cm steps 5 3. Length of grid Length from 50 cm to 500 cm in 10 cm steps Special lengths on request.

59 Pipe Grids climasystem - heating and cooling grids with oxygen barrier, with lateral welding connection (including proportionate number of wall brackets, fixing rails and fixing clamps with plugs) neue Art.-No. alte x50cm=0,12m x60cm=0,14m x80cm=0,19m x100cm=0,24m x150cm=0,36m x200cm=0,48m x250cm=0,60m x300cm=0,72m x350cm=0,84m x400cm=0,96m x450cm=1,08m x500cm=1,20m x50cm=0,18m x60cm=0,22m x80cm=0,29m x100cm=0,36m x150cm=0,54m x200cm=0,72m x250cm=0,90m x300cm=1,08m x350cm=1,26m x400cm=1,44m x450cm=1,62m x500cm=1,80m x50cm=0,24m x60cm=0,29m x80cm=0,38m x100cm=0,48m x150cm=0,72m x200cm=0,96m x250cm=1,20m x300cm=1,44m x350cm=1,68m x400cm=1,92m x450cm=2,16m x500cm=2,40m x50cm=0,30m x60cm=0,36m x80cm=0,48m x100cm=0,60m x150cm=0,90m x200cm=1,20m x250cm=1,50m x300cm=1,80m x350cm=2,10m x400cm=2,40m x450cm=2,70m x500cm=3,00m Special size on request climasystem 55

60 Dry wall panels The dry wall system is composed of 12,5 mm thick system elements made of gypsum fibre with oxygen-tight climasystem grids. climasystem - dry wall heating element oxygen-tight, with pipe nozzle for welding connection ,5 x 50 cm ,5 x 100 cm ,5 x 200 cm 2 Connection: PP-R 16 mm, weldable climasystem - corrugated connecting pipe oxygen-tight, weldable, for Art.-No ,5 cm 1 with twosided 90 elbow climasystem climasystem - dry wall heating element oxygen tight, with SHT connection ,5 x 50 cm ,5 x 100 cm ,5 x 200 cm 2 Connection: SHT- sliding sleeve technology climasystem - joint adhesive for climasystem - dry wall heating element The Fermacell-joint adhesive and further Fermacell products (drywall screws etc.) may be purchased directly at wholesale. 56

61 Accessories and grids climasystem - fixing rail for heating and cooling grids length = 24 cm 10 climasystem - wall bracket for heating and cooling grids climasystem - fixing clamp with wall plug for wall and ceiling installation climasystem - heating and cooling grid for ceiling panels with oxygen barrier, with plug connection on side for ceiling panels 62,5 x 62,5 cm for ceiling panels 60 x 60 cm Special size on request! climasystem climasystem - corrugated connecting pipe with oxygen barrier, in ring Connectable by welding with Art , separable every 25 cm climasystem - corrugated connecting pipe with oxygen barrier, for Art.-No and length= 57 cm double sided push-fit connection length = 57 cm, one-sided pushfit connection, one sided SHT 16 mm length = 57 cm, one sided pushfit connection, one sided PP- R 16 mm, weldable Connection systems and thermostates from page 70 57

62 Accessories climasystem - connector one-sided pushfit connection/one-sided PP-R 16 mm mm climasystem - T-adapter passage PP-R 16 mm weldable / branch plugable x 16 x 25 mm 10 climasystem climasystem - 45 elbow-adapter onesided plugable / onesided PP-R 16 mm weldable climasystem - sealing plug for wall and ceiling grids mm Welding tools for sealing plug Art.-No see tools mm 10 58

63 aquatherm pipes aquatherm - surface heating and radiator connecting pipe (PE-RT) with oxygen barrier according to DIN x 1,25 mm x 2,0 mm x 2,0 mm x 2,0 mm x 2,0 mm x 2,0 mm x 2,0 mm x 2,0 mm x 2,0 mm x 2,3 mm 250 Material: PE-RT with EVOH coating oxygen barrier according to DIN 4721/4726/16833 Colour: red aquatherm - surface heating and radiator connecting pipe (PB) with oxygen barrier according to DIN x 2,0 mm x 2,0 mm x 2,0 mm x 2,0 mm 500 Material: PB with EVOH coating oxygen barrier according to DIN 4726/4727/16968 Colour: grey aquatherm 59

64 Accessories aquatherm - pipe clip for pipes ø mm for pipes ø mm tacker for aquatherm - underfloor heating pipes Material: polyamide aquatherm - profile rail for wall heating, surface heating and industrial heating for pipes ø 10 mm - self-adhesive for pipes ø 14 mm - self-adhesive for pipes ø 16 mm - self-adhesive for pipes ø 20 mm for pipes ø 25 mm 2 32 Material: polyamide aquatherm - cable tie length: 200 mm aquatherm aquatherm - pipe guiding rail for surface fl exible sports fl oor, adjustable in length and height for pipes ø 20 mm Material: polyamide aquatherm - end rail for surface fl exible sports fl oor, adjustable in height for pipes ø 20 mm Material: polyamide 60

65 System elements aquatherm - system element 25 for surface heating L = 1005 mm, B = 750mm, H = 25 mm 17 m 2 2 Material: EPS-DEO dh - WLG 035 Pipe spacing 125 mm resp. 250 mm for underfloor heating pipes 14 mm Pipe requirement = 8 m/m² with pipe spacing of 125 mm Pipe requirement = 4 m/m² with pipe spacing of 250 mm R B Dä = 0,56 m² K/W aquatherm - heat conducting steel sheet for installation into system element TS L = 750 mm, B = 120 mm 24 Requirement: 10 Pcs/m² pipe spacing 125 mm 5 Pcs/m² pipe spacing 250 mm aquatherm - system element knob plate F ND 11 with deep-drawing foil L = 1000 mm, B = 1000 mm, H = 11 mm 20 m 2 Material: EPS-035-DEO dh Knob distance: 50 mm for installation without pipe clips sound insulation R B Dä = 0,31 m² K/W Insulation thickness: = 11 mm Total thickness including knobs = 30 mm aquatherm - system element knob plate F ND 30-2 with deep-drawing foil L = 1000 mm, B = 1000 mm, H = 30-2 mm 10 m 2 2 Material: EPS-040-DES sg Knob distance: 50 mm for installation without pipe clips sound insulation R B Dä = 0,75 m² K/W Insulation thickness: = 32/30 mm Total thickness including knobs = 51/49 mm aquatherm 61

66 Anschlußsysteme, System elements, accessories Thermostate, Reglung aquatherm - system element valufix-roll L = 1000 mm, B = 1000 mm, H = 35-3 mm 10 m 2 2 Material: EPS-045-DES with: - cloth-lined covering layer, protected against corrosion - imprinted screen for placing - impact sound insulation RlB Dä = 0,75 m² K/W aquatherm - system element valutherm with deep-drawing foil B = 1080 mm 50 m 2 2 System element consisting of: - mutual corrosion protection layer - imprinted screen for placing - cloth-lined covering layer (acc.to DIN with min. 80 mm overlap) For placing of heat and sound insulating plates on-site (hardly flammable) made of polystyrene EPS/DEO/DES aquatherm - plastic nail for fixing of the system element valutherm aluminium grid foil m Material: polyamide Requirement: 2 Pcs/m² aquatherm aquatherm - adhesive tape for sealing of joint gaps in system elements L = 66 m 1 Requirement 1m/m² 62

67 Accessories aquatherm - edge insulation height = 160 mm, thicknes = 8 mm 25 Material: PE- foam - very low flammabitity - with covering foil including self-adhesive strip - perforated tear-off strip aquatherm - expansion joint section set double-sided overlay height= 100 mm, thickness= 8 mm 20 to form permanent elastic joints for heating screeds and to seperate screed fields consisting of: - T-profile for absorption of expansion strips - expansion strips of PE Note: Please use the aquatherm corrugated pipe (Art.-No ) to protect the connecting pipe in the area of screed moving joint. aquatherm - protection pipe for expansion joint section to protect the connecting pipe in the area of screed moving joint for pipe ø mm 10 Note: Protection pipe can also be used for passage through a stuck frame with dry-lined walls. Material: PE aquatherm - special floor mix for thin-layer cement screeds Consumption per m 2 0,15 kg 10 kg for increasing the screed density aquatherm - special floor mix for thin-layer cement screeds Consumption per m 2 1,45 kg 25 kg aquatherm aquatherm Screed-pipe covering: 30 mm aquatherm - screed measuring point for marking the measuring points in the screed

68 aquatherm Anschlußsysteme, Heating circuit manifolds, Thermostate, threaded Reglung connections aquatherm - heating circuit manifold with flow meter with ball valve and end piece set circuits, length = 295 mm circuits, length = 350 mm circuits, length = 405 mm circuits, length = 460 mm circuits, length = 515 mm circuits, length = 570 mm circuits, length = 625 mm circuits, length = 680 mm circuits, length = 735 mm circuits, length = 790 mm circuits, length = 845 mm 1 made of high quality brass pipe MS 63, with - flat packing connection - end pieces with thread - filling and ventilation valves - adjustment and stop valve in return with manual control cap and upper part of a thermostat - galvanized, sound insulated consoles - ball valves 1 with flat packing connection Screw joints have to be ordered separately aquatherm - Euroconus connector for heating circuit manifold, valves/couplings for pipe ø 10 x 1,25 mm for pipe ø 14 x 2,0 mm for pipe ø 16 x 2,0 mm for pipe ø 17 x 2,0 mm for pipe ø 20 x 2,0 mm

69 Valves and accessories aquatherm - ball valve set with threaded connection and gasket x 1 straight 1 20 aquatherm - connection set with elbow x 1 Set (2 St) 20 for vertical connection of ball valves aquatherm - line control valve set for manifold For restriction of flow rate respectively for hydraulic balancing of manifolds aquatherm - universal-flow meter add-on kit with elbow aquatherm - heating circuit manifold extension set 1-fold for fl ow and return with fl ow meter for mounting to aquatherm -manifold aquatherm aquatherm - heating circuit manifold extension set 1-fold for fl ow and return without fl ow meter

70 Valves and accessories aquatherm - heating pipe coupling adapter with euroconus Suitable euroconus connector Art.-No.: aquatherm - heating pipe screw connection adapter Adapter for 1/2 f euroconus Adapter for 1/2 m euroconus Suitable euroconus connector Art.-No.: aquatherm - heating circuit control valve flow with manual control cap and upper part of thermostat /2 m 1 40 Suitable euroconus connector Art.-No.: aquatherm aquatherm - return control valve lockable /2 m 1 40 Suitable euroconus connctor Art.-No.:

71 Manifold cabinets aquatherm - universal manifold cabinet UP1, size 1 for 2-3 circuits, height = mm, width = 400 mm, deepth = mm UP2, size 2 for 4-6 circuits, height = mm, width = 550 mm, Tiefe = mm UP3, size 3 for 7-10 circuits, height = mm, width = 750 mm, deepth = mm UP4, size 4 for circuits, height = mm, width = 950 mm, deepth = mm UP5, size 5 for max. 12 circuits with eat distribution station, height = mm, width = 1150 mm, deepth = mm for concealed installation with: - universal mounting, vertically and horizontally infinitely variable - lower lining height-adaptable - prepressed lateral pipe passage - lateral bases, height-adjustable - made of hot galvanized sheet steel - white laquered design acc. to RAL 9010 aquatherm - universal-manifold cabinet AP1, size 1 for 2-4 circuits, height = 730 mm, width = 455 mm, deepth = 150 mm AP2, size 2 for 5-7 circuits, height = 730 mm, width = 605 mm, deepth = 150 mm AP3, size 3 for 8-10 circuits, height = 730 mm, width = 805 mm, deepth = 150 mm AP4, size 4 for circuits, height = 730 mm, width = 1005 mm, deepth = 150 mm for surface installation with - universal mounting, vertically and horizontally infinitely variable - made of hot galvanized sheet steel - with laquered design acc. to RAL with detachable screed impact and pipe reversing plate aquatherm 67

72 MODE ESC + ENTER CLR aquatherm ARE-95 TK Controls aquatherm - mixing control unit for constant flow temperature, with: - circulation pump - control valve with flow sensor - by-pass valve with manual adjustment cap - safety temperature limiter - flow and return thermometer - differential pressure overflow valve up to approx. 120 m² - connection set with screw and ball valve 1 aquatherm - automatic control with: heating control depending on outside temperature with automatic switch (analogue) -adjustable from daily to weekly programm - circulation pump - safety temperature limiter at flow - external sensor - 3-way mixer - differential pressure overflow valve - flow- and return thermometer - connecting set with threaded joint and ball valve 1 aquatherm - automatic control for surface heating and sports fl oors with: heating control depending on outside temperature with automatic switch (digital) -load-dependent variable flow temperature -circulation pump, control, actuator - high-temperature limiter - external sensor - 3-way mixer with servo motor - insulation shell made from EPP - accessories for wall mounting - flow- and return thermometer - stop valves in flow and return aquatherm aquatherm - sensor for automatic control Art.-No aquatherm - heat distribution station Automatik Start up to 80 m heating surface 1 for extension/changeover of an existing radiator system with underfloor heating in conjunction with the aquatherm-manifolds Art.-No consisting of: - thermostatic mixing valve - thermometer - circulation pump - safety temperature limiter 68

73 Controls and accessories aquatherm - zone control with actuator for mounting at the aquatherm -manifolds straight edge 1 8 aquatherm - actuator for heating circuit manifolds and heating circuit control valves - fl ow volt volt 1 21 aquatherm - manual control cap for heating circuit manifold and heating circuit control valves - fl ow scale color: white aquatherm - individual room control with RTL valve and axial Th valve for control of - return temperature - room temperature - in connection for euroconus - with concealed manifold cabinet - with covering aquatherm aquatherm - AB-QM combination valve with RTL valve and axial Th valve DN 15-3/

74 Connection systems, thermostats 230 volt (heating) aquatherm - connection system AB Volt Up to 6 room thermostats connectable max. 14 actuators (extension: see modules) aquatherm - control module AB RM Volt for extension of 2 room thermostats up to 2 room thermostats connectable 8 actuators aquatherm - actuator module AB AM Volt for extension of actuators for large heating surfaces up to 2 groups with each 4 actuators are connectable aquatherm aquatherm - timer module AB TM volt, 24 volt and for radio connection system plugable 2 channel-digital clock for simple and comfortable programming of the heating times Function: 2 week programms / 42 storage locations automatic switching between sommer-/wintertime aquatherm - pump module AB PL Volt plugable extension for controlling of circulation pump Connection options: 2 x NYM 2 x 1,5 mm² for external pump 70

75 Connection systems, thermostats 230 volt (heating) aquatherm - room thermostat 230 volt - 50 Hz - differential gap 0,5 K, prepared for night setback white 1 30 Automatik Start C 15 INtelligent thermosthat 10 5 aquatherm - programmabel room thermostat, analogue 230 volt digital timer with day and week program white 1 10 Connection systems, thermostats 24 volt - radio controlled (heating) aquatherm - automatic control, wireless AB Volt up to 6 radio controls (wireless) connectable 13 actuators (24 volt) transformer: 230V/24V, 50/60 Hz, 50 va operating voltage: 24V/50/60 Hz aquatherm - automatic control, wireless AB Volt up to 12 radio controls (wireless) connectable 13 actuators (24 volt) aquatherm aquatherm - room thermostat wireless AR 4070 KF Room thermostats with wireless radio transmission (battery 2 x 1,5 V Mignon) temperature range: C 71

76 Connection systems, thermostats 24 volt (heating/ heating and cooling) aquatherm - connection system AB Volt Packing unit Connections: up to 6 room thermostats 24 v respectively room thermostats Art.-No / actuators (24volt) Transformer: 230V/24V, 50/60 Hz, 50 va Operating voltage: 24V/50/60 Hz aquatherm - control module AB RM volt Packing unit for extension of 2 room thermostats up to 2 room thermostats connectable 8 actuators aquatherm - actuator module AB AM Volt Packing unit for extension of actuators of large heating surfaces up to 2 groups with each 4 actuators connectable aquatherm aquatherm - pump module AB PL volt and for radio Packing unit plugable extension for controlling of circulation pump Connection options: 2 x NYM 2 x 1,5 mm² for external pump aquatherm - room thermostat 24 volt differential gap 0,5 K, prepared for night set-back Packing unit white 1 20 Including mounting base and electrical connection for room thermostats - suitable for wall installation and mounting on switch box 72

77 Connection systems, thermostats 24 volt (heating/ heating and cooling) aquatherm - heating / cooling module AB HK volt aquatherm - room thermostat for heating and cooling AR 4010 K 24 volt Packing unit Room thermostat for heating and cooling in one system Temperature range: C Operating voltage: 24V, 50/60 Hz Including mounting base and electrical connection for room thermostats - suitable for wall installation and mounting on switch box Packing unit The plug-in extension of the connection system automatically initiates the change-over of all connected room thermostats into cooling mode by external potential-free contact or manually. Connection systems, thermostats 230 volt (heating/ heating and cooling) aquatherm - control manifold ASV volt Packing unit aquatherm up to 6 room thermostats connectable max. 12 actuators aquatherm - room thermostat NRT volt, differential gap 0,5 K, for 2 pipe-systems aquatherm - room thermostat NRT volt, differential gap 0,5 K, for 4 pipe-systems Packing unit white 1 20 Automatik Start C aquatherm Packing unit Automatik Start white 1 20 C 73

78 aquatherm fusiotherm Cutting tools, welding devices Fusiotherm - pipe cutter for pipes mm for pipes mm for pipes mm 1 Fusiotherm - pipe cutter for pipes mm 1 30 Fusiotherm - orbital circular saw for pipes mm 1 This orbital circular saw can be ordered directly from Rothenberger with Art.-No ( High-performance orbital circular saw for fast, precise, perfectly aligned and right-angled cutting of plastic pipes mm at the building site or in the workshop. Important: Do not cut the Fusiotherm -pipes with customary hack saws. Fusiotherm -pipes can be cut with customary saws equipped with saw blades suitable for plastic. Fusiotherm - manual welding device (500 W) for pipes ø mm 1 aquatherm with base and case for tools Fusiotherm - manual welding device (800 W) for pipes ø mm 1 aquatherm with base and case for tools Fusiotherm - manual welding device (1400 W) tools for pipes ø mm 1 with base and case for tools 74

79 aquatherm aquatherm Welding machines Fusiotherm - welding machine (1400 W) for pipes ø mm 1 including welding tools mm, Fusiotherm -manual welding device (1400 W) and wooden transport case Fusiotherm - welding machine (1400 W) Light for pipes ø mm including Fusiotherm -manual welding device (1400 W) and wooden transport case Fusiotherm - electric welding jig for pipes ø mm 1 including standby accumulator, charging station and metal case Fusiotherm - base for Art.-No tools 75

80 tools Welding machines Fusiotherm - butt welding machine Rothenberger for pipes ø mm 1 including wooden transport box. The butt welding machine can be obtained directly from Rothenberger ( Fusiotherm - butt welding machine Ritmo for pipes ø mm 1 including wooden transport box. The butt welding machine can be obtained directly from Ritmo ( Fusiotherm - electrofusion device for pipes Ø mm 1 for Fusiotherm -electrofusion sockets Art.-No

81 Welding tools, welding devices, accessories Fusiotherm - temperature pencil for Fusiotherm -electrofusion sockets Art.-No Fusiotherm - temperature protective glove for tool change Paar Fusiotherm - cleaning wipes Box with 100 towels 1 20 for electrofusion sockets Fusiotherm - welding tool mm mm mm mm mm mm mm mm mm mm mm 1 6 climasystem - climasystem-welding tool for sealing plug Art.-No tools 77

82 Welding tool, peeling tools Fusiotherm - repair set Fusiotherm - peeling tool for climatherm OT, climatherm OT UV and fusiotherm stabi-composite pipe & 20 mm & 25 mm & 40 mm & 50 mm & 75 mm & 110 mm mm 1 Fusiotherm - peeling tool for electrofusion sockets Art.-No mm mm 1 50 to close holes of up to 10 mm in the pipe (pipe repair stick Art.-No ) Fusiotherm - pipe repair stick for pipe repairs /11 mm mm mm mm mm mm mm mm mm mm mm mm 1 5 -Special peeling tools have to be used for Fusiotherm -stabi composite pipes and for sliding electrofusion sockets. Please contact our sales department! Fusiotherm - spare blade for peeling tools Art.-No.: u tools

83 Welding tools Fusiotherm - welding tool For welding saddles Art.-No.: and x 20/25 mm x 20/25 mm x 20/25 mm x 32 mm x 20/25 mm x 32 mm x 40 mm x 20/25 mm x 32 mm x 40 mm x 20/25 mm x 32 mm x 40 mm x 50 mm x 20/25 mm x 32 mm x 40 mm x 50 mm x 63 mm x 20/25 mm x 32 mm x 40 mm x 50 mm x 63 mm x 75 mm x 90 mm x 20/25 mm x 32 mm x 40 mm x 50 mm x 75 mm x 63 mm x 90 mm x 110 mm x125 mm 1 tools 79

84 tools Welding tools, Mounting tools Fusiotherm - welding tool For welding saddles Art.-No.: and x 20/25 mm x 32 mm x 40 mm x 50 mm x 63 mm x 75 mm x 90 mm x 110 mm x 125 mm 1 Fusiotherm - chamfering device & 25 mm mm mm 1 12 for removal of the aluminium swarfs at the drill hole only with stabi-composite pipes - to prepare the saddle welding Fusiotherm - drill for installation of weld-in saddles & 25 mm (for pipes mm) & 25 mm (for pipes mm) mm mm * 50 mm * 63 mm ** 75 mm ** 90 mm ** 110 mm ** 125 mm 1 * may only be used in fixed drilling machines! ** tool holder MK4 Only for stabi-composite pipes! 80

85 Expanding tools and accessories aquatherm - pipe cutter for ø 25 mm for ø mm 1 30 for SHT- and aquatherm surface heating pipes aquatherm - bending tool for mounting rail Art.-No aquatherm -SHT - expanding tool up to ø mm 1 10 false jaws for the SHT-expanding tool for aquatherm -SHT PB-pipes mm mm & 20 mm mm mm 1 30 false jaws for the SHT-expanding tool for aquatherm -SHT multi-layer metal composite pipes & 20 mm mm mm mm 1 false jaws for the SHT-expanding tool for multi-layer metal composite pipe 16 mm with compression fitting Art.-No mm (17 x 2,5 mm) 1 30 tools 81

86 Mounting tools aquatherm -SHT - electric mounting tool for aquatherm -SHT-pipes for ø mm 1 aquatherm with tools for 16 and 20 mm, accumulator battery, charging station and metal box aquatherm -SHT - tool insert for electric mounting tool mm 1 Set mm 1 Set mm 1 Set mm 1 Set 20 aquatherm -SHT - mounting tool for ø mm 1 10 with tools for ø 16 and 20 mm, for the mechanical sliding sleeve connection aquatherm -SHT - angle attachment for aquatherm -SHT mounting tool Art.-No tools aquatherm -SHT - tool insert for aquatherm -SHT mounting tool Art.-No mm 1 Set mm 1 Set mm 1 Set mm 1 Set mm 1 Set mm 1 Set mm 1 Set 82

87 Tool cases, bending template, accessories aquatherm -SHT - tool case for ø mm 1 including: - pipe cutter (Art.-No ) - expanding tool with false jaws - mounting tool with tools for 16 and 20 mm (Art.-No ) Note: Expanding and mounting tool for 25 and 32 mm (Art.-No , , 50832) as well as for SHT multi-layer metal composite pipe (Art.-No , 50860, 50862) have to be ordered separately. aquatherm -SHT - tool case for multi-layer metal composite pipe for ø mm 542,44 1 including: - pipe cutter (Art.-No ) - expanding tool (Art.-No ) with false jaws mm (Art.-No ) - mounting tool (Art.-No ) with tools (Art.-No and 50828) aquatherm -SHT - bending template for multi-layer metal composite pipe for ø 16 mm 20, for ø 20 mm for ø 25 mm 1 20 aquatherm - tackfix tacker Note: New design! Applicable with Art.- No for fixing of heating pipe with pipe clips on the aquatherm -system elements aquatherm - pipe hasp for winding the heating pipe tools 83

88 Features Permissible working pressure for potable water installations Fluid transported: water acc. to DIN Temperature 20 C 68 F 30 C 86 F 40 C 104 F 50 C 122 F 60 C 140 F Potable water (cold) Potable water (warm) Service life Fusiotherm - pipe SDR 11 Fusiotherm - pipe SDR 7.4 Fusiotherm - pipe 6 Fusiotherm - Fusiotherm - stabi composite pipe faser composite pipe SDR 7.4 Permissible working pressure in bar and (psi) C F C F C F Faser and Stabi composite pipe: high working stress at lower wall thickness and higher flow rate * SDR = Standard Dimension Ratio (diameter / wall thickness ratio) SDR = 2 x S + 1 d / s (S = Pipe series index from ISO 4065)

89 Features Permissible working pressure heating systems or closed systems Heating period constant operating temperature 70 C / 158 F incl. 30 days per year at constant operating temperature 70 C / 158 F incl. 60 days per year at constant operating temperature 70 C / 158 F incl. 90 days per year at Temperature 75 C 167 F 80 C 176 F 85 C 185 F 90 C 194 F 75 C 167 F 80 C 176 F 85 C 185 F 90 C 194 F 75 C 167 F 80 C 176 F 85 C 185 F 90 C 194 F Service life climathermpipe SDR 11 / faser composite pipe SDR 11 & OT Fusiotherm - faser composite pipe SDR 7.4 Fusiotherm - stabi composite pipe Fusiotherm - pipe SDR 7.4 Permissible working pressure in bar and (psi) * SDR = Standard Dimension Ratio (diameter /wall thickness ratio) SDR = 2 x S + 1 d / s (S = Pipe series index from ISO 4065) 85

90 Features Permissible working pressure for general pressure pipe applications out of the charted application ranges Temperature 10 C 15 C 20 C 30 C 40 C 50 C 60 C 70 C 75 C 80 C 90 C 95 C 86 Service life climatherm - faser-composite climatherm - pipe SDR 11 & faser-composite OT SDR 11 pipe SDR 7,4 & climatherm - pipe OT SDR 7,4 SDR 11 aquatherm lilacpipe SDR 11 Permissible working pressure in bar and (psi) 1 27,8 43,2 27,8 5 26,2 40,7 26, ,6 39,7 25, ,7 38,3 24, ,1 37,4 24, ,5 36,4 23,5 1 25,7 39,9 25,7 5 24,2 37,5 24, ,6 36,6 23, ,8 35,3 22, ,2 34,4 22, ,6 33,5 21,6 1 23,8 36,8 23,8 5 22,3 34,6 22, ,7 33,7 21, ,0 32,5 21, ,4 31,7 20, ,9 30,9 19,9 1 20,2 31,3 20,2 5 18,9 29,4 18, ,4 28,6 18, ,8 27,5 17, ,3 26,8 17, ,8 26,0 16,8 1 17,1 26,6 17,1 5 16,0 24,9 16, ,6 24,1 15, ,0 23,2 15, ,6 22,6 14, ,1 21,9 14,1 1 14,5 22,5 14,5 5 13,5 21,0 13, ,1 20,4 13, ,6 19,6 12, ,2 19,0 12, ,9 18,4 11,9 1 12,2 19,0 12,2 5 11,4 17,7 11, ,0 17,1 11, ,6 16,4 10, ,3 15,9 10,3 1 10,3 16,0 10,3 5 9,6 14,8 9,6 10 9,2 14,3 9,2 25 8,0 12,5 8,0 50 6,8 10,5 6,8 1 9,4 14,6 9,4 5 8,7 13,5 8,7 10 8,0 12,5 8,0 25 6,4 10,0 6,4 50 5,4 8,4 5,4 1 8,6 13,4 8,6 5 7,7 11,9 7,7 10 6,5 10,0 6,5 25 5,2 8,0 5,2 1 7,2 11,2 7,2 5 5,1 7,8 5,1 10 4,3 6,6 4,3 1 6,1 9,5 6,1 5 4,1 6,4 4,1 10 3,5 5,4 3,5

91 Index Art.-No. Page Art.-No. Page Art.-No. Page Art.-No. Page

92 Index Art.-No. Page Art.-No. Page Art.-No. Page Art.-No. Page

93 Index Art.-No. Page Art.-No. Page Art.-No. Page Art.-No. Page

94 Index Art.-No. Page Art.-No. Page Art.-No. Page Art.-No. Page /

95 Index Art.-No. Page Art.-No. Page Art.-No. Page Art.-No. Page

96 Index Art.-No. Page Art.-No. Page Art.-No. Page Art.-No. Page / /

97 Index Art.-No. Page Art.-No. Page Art.-No. Page Art.-No. Page / / / /

98 Index Art.-No. Page Art.-No. Page Art.-No. Page /

99 Index Fusiotherm assembling jig 20 back plate elbow 18 back plate elbow for dry construction 19 ball valve for manifold 30 ball valve PP/brass 32 brass counterpart 27 climatherm faser composite pipe 5 SDR 11 / SDR 7,4 climatherm faser composite pipe 6 SDR 11 / SDR 7,4 OT climatherm faser composite pipe 6 SDR 11 / SDR 7,4 OT UV climatherm faser composite pipe 5 SDR 11 / SDR 7,4 UV climatherm pipe SDR 11 4 concealed valve 30 counterpart 26 coupling screw joint 17 cross 14 cross over fitting 14 distribution block plumbing 29 draining branch 33 dry construction wall fitting 19 elbow elbow 90 9 electrofusion socket 17 end cap 14 extension for fusiotherm-ball valve 33 extension for Fusiotherm concealed valve 31 fl ange adapter 16 four-port manifold 29 Fusiotherm composite pipe SDR 7,4 UV 3 Fusiotherm faser composite pipe SDR 7,4 2 Fusiotherm pipe SDR 11 1 Fusiotherm pipe SDR 6 1 Fusiotherm pipe SDR 7,4 2 Fusiotherm stabi composite pipe 3 SDR 7,4 globe valve 30 inclined valve 32 lilac - pipe SDR 7,4 4 loose nut adapter 25 manifold end piece with female thread* 29 Mounting plate 18 Mounting rail 18 Mounting rail 18 mounting unit 20 non-return valve 32 nut adapter 26 pipe clamps 7 pipe fastening bow 8 pipe support 8 plastic pipe clamps 8 plastic coated steel fl ange 16 plug for pressure tests 20 PP-ball valve 33 PP-plastic screw joint 17 reducer 10 reducing socket 9 reducing tee socket 9 sound isolation cover 18 stop valve body 32 supporting strap for four-port manifold 30 tee 12 threaded branch tee with female thread 24 threaded branch tee with male thread 25 transition coupling with female thread 25 transition coupling with male thread 25 transition elbow 21 transition elbow with female thread 24 transition elbow with male thread 24 transition piece 19 transition piece 23 transition piece with female thread 22 transition piece with male thread 23 water meter nut adapter 26 weld-in saddle weld-in saddle with female thread 28 weld-in saddle with male thread 28 aquatherm SHT adapter 47 back plate elbow 37 back plate elbow, twin 38 ball valve for SHT manifold 43 blind plug 44 compression fitting 42 concealed stop valve 37 connecting bend 48 connecting elbow 38 connecting elbow for concealed fl ushing box 38 corrugated pipe 36 coupling 40 95

100 Index distribution block 46 distribution block 50 double rosette, retractable 49 elbow end cap 44 end piece 47 end sleeve for corrugated pipe 36 euroconus adapter 40 four-port manifold 43 four-port manifold 43 insulation cover 37 Insulation for the aquatherm SHT distribution 46 block manifold end piece with female thread 44 metal connecting bend 49 Mounting rail 37 multi layer metal composite pipe 35 potable water and radiator connection pipe 34 radiator connecting set 49 radiator valve 42 radiator-t-connecting set 49 reducing coupling 41 reducing tee 39 SHT radiator connection pipe PE-RT 36 snap in radius support 36 sound isolation plate 37 spare sliding sleeve 47 Supporting strap for four-port manifold 44 tee 38 tee with female thread 39 transition elbow 38 transition piece 40 transition screw joint 41 universal manifold fivefold 45 universal manifold fourfold 45 universal manifold triple 45 weld-in saddle adapter 47 aquatherm connecting bend 48 coupling 50 distribution block 48 profile rail 50 protection sleeve 49 radiator connection piece 49 radiator connection set 49 red-nipple 49 reducer tee 50 surface heating pipe (PB) 50 transition piece, male 50 climasystem climasystem 45 elow-adapter 58 corrugated connecting pipe 56 climasystem distribution block 56 climasystem dry wall heating element 56 climasystem jiont adhesive 56 climasystem T-adapter 58 connector 58 corrugated connecting pipe 57 elbow end cap 53 fixing clamp with wall plug 57 fixing rail 57 heating and cooling grid for ceiling panels 57 heating and cooling grids 55 PP-grid connection pipe 53 socket 53 wall bracket 57 aquatherm AB-QM combination valve 69 actuator 69 actuator module AB AM actuator module AB AM adhesive tape 62 automatic control 68 automatic control, wireless AB automatic control, wireless AB ball valve set 65 cable tie 60 connection set 65 connection system AB connection system AB control manifold ASV 6 73 control module AB RM control module AB RM edge insulation 63 end rail 60 Euroconus connector 64 expansion joint section set 63 heat conducting steel sheet 61 heating / cooling module AB HK heating circuit control valve fl ow 66 96

101 Index heating circuit manifold extension set 1-fold 65 heating circuit manifold with fl ow meter 64 heating pipe coupling adapter 66 heating pipe screw connection adapter 66 heat distribution station 68 individual room control 69 line control valve set for manifold 65 manual control cap 69 mixing control unit 68 pipe clip 60 pipe guiding rail 60 plastic nail 62 profile rail 60 programmabel room thermostat, analogue 71 protection pipe for expansion joint section 63 pump module AB PL pump module AB PL radio control 68 return control valve 66 room thermostat 71 room thermostat 72 room thermostat for heating and cooling 73 AR 4010 K room thermostat NRT room thermostat NRT room thermostat wireless AR 4070 KF 71 screed additive fl oor mix 63 screed measuring point 63 special fl oor mix 63 surface heating and radiator connecting pipe 59 (PB) surface heating and radiator connecting pipe 59 (PE-RT) system element knob plate F ND system element knob plate F ND system element TS system element valufix-roll system element valutherm 62 timer module AB TM universal-fl ow meter 65 universal manifold cabinet 67 butt welding machine 76 chamfering device 80 cleaning wipes 77 climasystem-welding tool 77 drill 80 electric mounting tool 82 electric welding jig 75 electrofusion device 76 expanding tool 81 false jaws for the SHT-expanding tool 81 gloves 77 manual welding device (1400 W) 74 manual welding device (500 W) 74 manual welding device (800 W) 74 mounting tool 82 orbital circular saw 74 peeling tool 78 pipe cutter 74 pipe cutter 81 pipe hasp 83 pipe repair stick 78 repair set 78 spare blade 78 tackfix tacker 83 temperature pencil 77 tool case 83 tools angle attachment 82 base for Art.-No bending template 83 bending tool 81 butt welding machine 76 97

102

103 Notes

104 Product approved by aquatherm GmbH Biggen 5 D Attendorn Phone: +49 (0) Fax: +49 (0) Wilhelm-Rönsch-Str. 4 D Radeberg Phone: +49 (0) Fax: +49 (0) info@aquatherm.de Order.-No. E Edition: 02/09 aquatherm GmbH Product Catalogue 2009