Piping technology gunmetal
|
|
- Barnaby Fletcher
- 5 years ago
- Views:
Transcription
1 model no. page model no. page model no. page model no. page model no. page Sanpress with SC-Contur Piping technology gunmetal 1 ZM_G3_int_en_ _082446_5.pdf :02:32
2 Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos and in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly. Press connectors All sizes with SC-Contur connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage. During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa 0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hpa 0.3 MPa. DW-8501BS0377 System with pipe (d ) DW-8501AP3032 Use of press tools The functional safety of the Viega press connector systems is primarily dependent on the perfect condition of the press tools and press machines used. For this reason, for the production of press connections, we recommend the use of Viega press tools and their regular inspection by authorised service points. Technical data Press connectors and components are constantly being optimised. If required, the current Z and installation dimensions can be obtained from the download area of the Viega homepage: 2 Marking Green dot on the press connection Sealing elements EPDM, black (ethylene-propylene-dien-monomer rubber); up to 110 C; not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol Pipes Stainless steel pipes laser-welded and made of corrosion-proof stainless steel Material-No (AISI 316L) (X5CrNiMo ), with 2.3 % molybdenum for increased durability; yellow plugs Material-No (AISI 444) (X2CrMoTi 18 2), with PRE-value 24.1; green plugs Dimensions/Material Standard sizes: d 12; 15; 18; 22; 28; 35; 42; 54 made of gunmetal XL sizes: d 76.1; 88.9; made of gunmetal Press connectors with threaded connection made of gunmetal Areas of application Drinking water Rainwater Compressed air system Agriculture Industry Special applications Shipbuilding Use of the system for application areas and media other than those described here must be agreed with Viega Service Center. Operating conditions Drinking water installations Drinking water without restrictions in acc. with DWO Operating temperature max. 85 C Operating pressure max. 1.6 MPa Heating installations Operating temperature max. 110 C Operating pressure max. 1.6 MPa Irrelevant of the direction of flow, mixed installations are permitted. Note The stainless steel pipes should be protected against high concentrations of chloride generated by both the medium and by external factors! Certification Pipes (d ) DW-7301BS0375 Pipes (d ) DV-7301BS0411 System with pipe (d ) ZM_G3_int_en_ _082446_5.pdf :02:32
3 Sanpress with SC-Contur G3 G3 Index Elbows 4 T-pieces 7 Adapter pieces/adapter elbows 10 Couplings 15 Reductions 16 Screw fittings 17 Caps, plugs 20 Flanges 21 Wall plates 23 Wall lead-ins 26 Compensators 26 Gunmetal ball valves 27 Concealed free-flow valves, concealed straight seat valves 27 GTIN-Code (Global Trade Item Number, previously EAN-Code) The GTIN-Code composed out of the constant manufacturer number and a six-digit article code - in this example The exchange of the last six digits against the article code shows the GTIN-Code. 3 ZM_G3_int_en_ _082446_5.pdf :02:32
4 ELBOWS Sanpress Elbow 90 Model 2216 article d Z L Z* L* Z* = previous version L* = length of the previous version Sanpress XL Elbow 90 Model 2216XL article d Z L Z* L* Z* = previous version L* = length of the previous version Sanpress Elbow 90 Model article d Z L1 L2 Z* L1* L2* Z* = previous version L* = length of the previous version Sanpress XL Elbow 90 Model XL article d Z L1 L2 Z* L1* L2* Z* = previous version L* = length of the previous version 4 ZM_G3_int_en_ _082446_5.pdf :02:33
5 Sanpress with SC-Contur G3 G3 Sanpress Elbow 45 Model 2226 article d Z L Sanpress XL Elbow 45 Model 2226XL article d Z L Sanpress Elbow 45 Model article d Z L1 L2 Z* L1* L2* Z* = previous version L* = length of the previous version Sanpress XL Elbow 45 Model XL article d Z L1 L ZM_G3_int_en_ _082446_5.pdf :02:34
6 Sanpress Crossover - steel non-corroding Model article d L1 L2 L3 L4 H ZM_G3_int_en_ _082446_5.pdf :02:35
7 Sanpress with SC-Contur G3 G3 T-PIECES Sanpress T-piece Model 2218 article d1 d2 d3 Z1 Z2 Z3 L1 L2 L3 Z1* Z2* Z3* L1* L2* L3* Z* = Z- dimension of the previous version L* = length of the previous version 7 ZM_G3_int_en_ _082446_5.pdf :02:36
8 Sanpress XL T-piece Model 2218XL article d1 d2 d3 Z1 Z2 Z3 L1 L2 L Sanpress T-piece Model article d1 R d2 Z1 Z3 L1 L2 L ¾ ¾ ¾ ¾ ¾ ¾ ¼ ZM_G3_int_en_ _082446_5.pdf :02:37
9 Sanpress with SC-Contur G3 G3 Sanpress T-piece Model article d1 Rp d2 Z1 Z2 Z3 L1 L2 L3 SS Z1* Z2* Z3* L1* L2* L3* ½ ⅜ ½ ½ ½ ¾ ½ ¾ ½ ½ ½ SS = wrench size Z* = Z- dimension of the previous version L* = length of the previous version Sanpress XL T-piece Model XL article d1 Rp d2 Z1 Z2 Z3 L1 L2 L3 SS ¾ ¾ ¾ SS = wrench size 9 ZM_G3_int_en_ _082446_5.pdf :02:38
10 Sanpress T-piece, G¼, with plug-in end Model article d1 G d2 Z1 Z2 L1 L2 L ¼ ¼ ¼ ¼ ¼ ¼ ¼ ADAPTER PIECES/ADAPTER ELBOWS Sanpress Adapter Model 2211 article d R Z L SS Z* L* SS* ⅜ ½ ⅜ ½ ⅜ ½ ¾ ½ ¾ ½ ¾ ½ ¾ ¾ ¼ ¼ ½ ¼ ½ ½ SS = wrench size Z* = previous version L* = length of the previous version SS* = previous version (spanner size) Sanpress Adapter Model article d G Z L SS ½ SS = wrench size 10 ZM_G3_int_en_ _082446_5.pdf :02:39
11 Sanpress with SC-Contur G3 G3 Sanpress XL Adapter Model 2211XL article d R Z L ½ Sanpress Adapter Model 2212 article d Rp Z L SS ⅜ ½ ½ ⅜ ½ ¾ ½ ½ ¾ ½ ¾ ½ ¾ ¼ ¾ ¼ ¼ ½ ½ SS = wrench size Sanpress Adapter Model article d Rp Z L H ½ ½ ½ Sanpress Adapter Model article d Rp Z L H * 18 ½ * = Discontinued, limited availability 11 ZM_G3_int_en_ _082446_5.pdf :02:40
12 Sanpress Adapter Model article DN d Z L1 L2 SS1 SS SS = Spanner size SS = spanner size Sanpress Adapter Model 2213 article d1 d2 L Z SS1 SS * * SS = Spanner size SS = spanner size * = Discontinued, limited availability Sanfix P Adapter Model 2213P article d1 d2 L Z * * = Discontinued, limited availability Raxofix Adapter Model 5313P article d1 d2 Z L ZM_G3_int_en_ _082446_5.pdf :02:41
13 Sanpress with SC-Contur G3 G3 Sanpress Plug-in piece Model article d R L SS ½ ½ ½ ¾ ½ ¾ ¼ ½ SS = wrench size Sanpress Plug-in piece Model article d Rp Z L SS ½ ½ ½ ¾ ½ ¾ ¾ ¼ ½ SS = wrench size Sanfix P Plug-in piece Model 2113 article d1 d2 Z L Raxofix Plug-in piece Model 5313 article d1 d2 Z L ZM_G3_int_en_ _082446_5.pdf :02:42
14 Sanpress Plug-in elbow 90 Model article d Rp Z L1 L ½ Sanpress Adapter elbow 90 Model 2214 article d R Z L1 L2 SS Z* L1* L2* ⅜ ½ ½ ⅜ ½ ¾ ½ ½ ¾ ¾ ¼ ½ SS = wrench size Z* = previous version L* = length of the previous version Sanpress Adapter elbow 90 Model article d R Z L1 L ½ ZM_G3_int_en_ _082446_5.pdf :02:43
15 Sanpress with SC-Contur G3 G3 Sanpress Adapter elbow 90 Model article d Rp Z1 Z2 L1 L2 Z1* Z2* L1* L2* ⅜ ½ ½ ⅜ ½ ¾ ½ ½ ¾ ½ ¾ ½ ¾ ¼ ½ Z* = Z- dimension of the previous version L* = length of the previous version COUPLINGS Sanpress Coupling Model 2215 article d Z L Sanpress XL Coupling Model 2215XL article d Z L ZM_G3_int_en_ _082446_5.pdf :02:44
16 Sanpress Sliding coupling Model article d L INDmin INDmin = insertion depth minimum Sanpress Sliding coupling Model article d Z L INDmin INDmin = insertion depth minimum Sanpress XL Sliding coupling Model XL article d L INDmin INDmin = insertion depth minimum REDUCTIONS Sanpress Reducer Model article d1 d2 Z L Z* L* Z* = previous version L* = length of the previous version 16 ZM_G3_int_en_ _082446_5.pdf :02:45
17 Sanpress with SC-Contur G3 G3 Sanpress XL Reducer Model XL article d1 d2 Z L SCREW FITTINGS Sanpress Screw fitting Model 2260 article d Z L SS1 SS SS = Spanner size SS = spanner size Sanpress Adapter union Model 2262 article d Rp Z L SS1 SS ½ ½ ¾ ½ ¾ ¾ ¾ ¼ ½ SS = Spanner size SS = spanner size 17 ZM_G3_int_en_ _082446_5.pdf :02:46
18 Sanpress Adapter union Model 2265 article d R Z L SS1 SS ⅜ ½ ½ ¾ ½ ¾ ½ ¾ ¾ ¼ ½ SS = Spanner size SS = spanner size Sanpress Adapter union 90 Model 2255 article d Rp Z1 Z2 L1 L2 SS1 SS ½ ½ ½ ¾ ¾ ¼ ½ SS = Spanner size SS = spanner size 18 ZM_G3_int_en_ _082446_5.pdf :02:47
19 Sanpress with SC-Contur G3 G3 Sanpress Connection screw fitting Model 2263 article VdS d G Z L1 L2 SS ⅜ ½ ¾ ⅜ ½ ¾ ⅜ ½ ¾ ¼ ½ ¾ ¾ ¾ ¼ ½ ¼ ½ ½ ¾ ¼ ⅜ ½ ¾ VdS = VdS certification SS = wrench size Sanpress XL Connection screw fitting Model 2263XL article d G Z L1 L2 SS ½ SS = wrench size Sanpress Connection screw fitting Model 2264 article d G Z L1 L2 SS ¾ ¾ ¼ ½ ¾ ⅜ SS = wrench size 19 ZM_G3_int_en_ _082446_5.pdf :02:48
20 Sanpress Insulating union Model 2267 article d Rp Z L SS1 SS ½ ¾ ½ ¾ ¾ ¼ ½ SS = Spanner size SS = spanner size CAPS, PLUGS Forcing plug - brass Model 2269 article d L Ø Ø = diameter Sanpress XL Cap Model 2256XL article d Rp Z L ¾ ¾ ¾ ZM_G3_int_en_ _082446_5.pdf :02:49
21 Sanpress with SC-Contur G3 G3 FLANGES Sanpress Flange adapter Model article DN d Z L W1 W2 Ø1 Ø2 k n Ø = diameter k = bolt circle diameter n = number of holes Sanpress XL Flange adapter Model XL article DN d Z L W1 W2 Ø1 Ø2 k n Ø = diameter k = bolt circle diameter n = number of holes 21 ZM_G3_int_en_ _082446_5.pdf :02:50
22 Sanpress XL Flange adapter Model XL article DN d Z L k Ø1 Ø2 W1 W2 n k = bolt circle diameter Ø = diameter n = number of holes Sanpress XL Flange, PN 16 Model XL article DN Rp Ø1 L W1 W2 Ø2 k n ½ Ø = diameter k = bolt circle diameter n = number of holes 22 ZM_G3_int_en_ _082446_5.pdf :02:51
23 Sanpress with SC-Contur G3 G3 WALL PLATES Sanpress Wall plate Model 2225 article d Rp L Z1 Z2 L1 L2 L3 L ½ Sanpress Wall plate Model article d Rp Z1 Z2 L1 L2 L3 L4 Z1* Z2* L1* L2* L3* L4* ½ ½ ½ ½ ½ ¾ ½ ¾ Z* = Z- dimension of the previous version L* = length of the previous version Sanpress Wall plate Model article d Rp Z1 Z2 L1 L2 L3 L ½ ZM_G3_int_en_ _082446_5.pdf :02:52
24 Sanpress Double wall plate Model article d1 Rp d2 Z1 Z2 Z3 L1 L2 L3 L ½ ½ ½ Sanpress Wall plate T-piece Model article d1 Rp d2 Z1 Z2 L1 L2 L ½ ½ Press-in nozzle Model article d Z L Mounting bracket - galvanised steel Model article DG L1 L2 L3 L4 L5 L6 L7 M /100/ DG = depth gauge M = thread type Mounting bracket - galvanised steel Model article DG L1 L2 L3 L4 L5 M DG = depth gauge M = thread type 24 ZM_G3_int_en_ _082446_5.pdf :02:53
25 Sanpress with SC-Contur G3 G3 Mounting bracket - galvanised steel Model article L1 L2 L3 L4 L5 M M = thread type Sanpress Mounting unit Model article d Rp DG Z1 Z2 L1 L2 L3 L4 L5 L ½ DG = depth gauge Sanpress Mounting unit Model article d Rp DG Z1 Z2 L1 L2 L3 L4 L5 L ½ DG = depth gauge Sanpress Mounting unit Model article d1 Rp d2 Z1 Z2 L1 L2 L3 L4 L5 L ¾ ZM_G3_int_en_ _082446_5.pdf :02:54
26 Connection elbow 90 Model article Rp Z1 Z2 L1 L2 L3 M ½ ¾ M = thread type 1) gunmetal 2) brass WALL LEAD-INS Sanpress Wall lead-in Model article d Rp G L Z1 Z2 L1 L2 L ½ ¾ ½ ¾ ½ ¾ ½ ¾ Sanpress Wall lead-in Model article d Rp G L Z1 Z2 L1 L ½ ¾ Mounting set Model article G SS D ¾ SS = wrench size D = external diameter COMPENSATORS Compensator Model 2251 article d Z L Ø Ø = diameter 26 ZM_G3_int_en_ _082446_5.pdf :02:56
27 Sanpress with SC-Contur G3 G3 GUNMETAL BALL VALVES Easytop Ball valve Model 2270 article DN d Z1 Z2 L1 L2 L3 H Easytop Ball valve Model article DN d Rp Z1 Z2 L1 L2 L3 H SS ½ ½ ¾ ¼ ½ SS = wrench size Easytop Free-flow valve Model 2242 article d Z L H1 H2 D D = external diameter CONCEALED FREE-FLOW VALVES, CONCEALED STRAIGHT SEAT VALVES Easytop Concealed free-flow valve Model 2240 article d ID Z L H1 H2 SS D ID = installation depth SS = wrench size D = external diameter 27 ZM_G3_int_en_ _082446_5.pdf :02:57
28 Easytop Concealed straight seat valve Model 2235 article DN d ID Z L H1 H2 Ø ID = installation depth Ø = diameter 28 ZM_G3_int_en_ _082446_5.pdf :02:57
29 order code page order code page order code page order code page order code page ZM_G3_int_en_ _082446_5.pdf :02:58
30 order code page order code page order code page order code page order code page ZM_G3_int_en_ _082446_5.pdf :02:58
31 model no. page model no. page model no. page model no. page model no. page XL P XL XL XL XL XL XL XL XL XL XL XL XL XL XL P ZM_G3_int_en_ _082446_5.pdf :02:58
Piping technology stainless steel
model no. page model no. page model no. page model no. page model no. page Sanpress Inox with SC-Contur Piping technology stainless steel 1 ZM_G1_int_en_20170106_082446_5.pdf 1 06.01.2017 10:00:47 Press
More informationPiping technology copper/gunmetal
model no. page model no. page model no. page model no. page model no. page Profipress with SC-Contur Piping technology copper/gunmetal 1 ZM_A1_int_en_20170203_083425_5.pdf 1 03.02.2017 10:24:38 Press connector
More informationPiping technology stainless steel
model no. page model no. page model no. page model no. page model no. page Sanpress Inox G with SC-Contur Piping technology stainless steel 1 ZM_G2_int_en_20170106_082446_5.pdf 1 06.01.2017 10:08:51 Press
More informationPiping technology steel
model no. page model no. page model no. page model no. page model no. page Prestabo with SC-Contur Piping technology steel 1 ZM_F1_int_en_20170109_105948_5.pdf 1 09.01.2017 11:44:43 Press connector systems
More informationPiping technology plastic
model no. page model no. page model no. page model no. page model no. page Viega Smartpress Piping technology plastic 1 ZM_L6_int_en_20170314_131501_5.pdf 1 14.03.2017 15:31:15 Flow-optimised press connector
More informationPiping technology stainless steel
INT 4/ Catalogue 0/0 We reserve the right to effect changes. Sanpress Inox Piping technology stainless steel G Press connector system with press connectors an pipes mae of stainless steel material Nos..440
More informationTake O ff Dimensions. Profipress with SC- Contur. Pipe line systems / Pipe connection technology 12.8 /
A Take O ff Dimensions Pipe line systems / Pipe connection technology Profipress with SC- Contur 2.8 / 202 86529 www.viega.com A Take Off Dimensions Pipe line systems / Pipe connection technology Profipress
More informationSmartloop Connection Set. Instructions for Use from 07/2008. en_int
Smartloop Connection Set Instructions for Use Model Year built: 2276.1 from 07/2008 en_int Smartloop Connection Set 2 from 27 Table of contents Table of contents 1 About these instructions for use 4 1.1
More informationGlobo P. Ball valves Pump ball valve made of gunmetal
Globo Ball valves ump ball valve made of gunmetal IMI EIMEIER / Shut-off valves / Globo Globo Globo and Globo -S are used in pump warm water heating systems for direct connection to circulating pumps with
More informationINT 4/15 Catalogue 2015/2016 We reserve the right to effect changes. System press tools. Piping technology
INT 4/5 Catalogue 205/206 We reserve the right to effect changes. Piping technology P For all Viega press systems from d 2 08.0. Viega system press tools can be used with all metallic Viega press systems
More informationPRESS-FIT SYSTEM FOR SPRINKLER CONNECT WITH CONFIDENCE
PRESS-FIT SYSTEM FOR SPRINKLER CONNECT WITH CONFIDENCE CONNECT WITH CONFIDENCE With a wealth of expertise and the broadest range of solutions and systems on the market, Pegler Yorkshire s Connect products
More informationAreas of Application of Metallic Installation Systems
Areas of Application of Metallic Installation Systems Information for planning and completion 566263 02.15 / 2016 Areas of application of metallic installation systems Conversion Bar / Pascal.............
More information4 01 ta l o g u e 2 Ca P R i c e L I S T
Catalogue 2014 The Complete Product Range The compression fittings: Our Gebo Quick the universal compression fittings are available for steel pipes of 1/2" to 2" diameter, for black steel pipes of 20 mm
More informationNiroSan -Press. Press systems from high-grade stainless steel Made in Germany
NiroSan -Press pressable with V, M and SA-profile Press systems from high-grade stainless steel Made in Germany NiroSan -Press system fittings and NiroSan system pipes in stainless steel with tool compatibility,
More informationSINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationDOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationNew! NiroTherm. Premium solution for corrosive environments. exclusively from SANHA
NiroTherm New! = Tool Compatibility + Push & Stay + Leak Path Feature exclusively from SANHA Premium solution for corrosive environments Optimal for heating, cooling and compressed air installations high
More informationRubber-steel gaskets. Gasket profiles WG2 WG2P WL-HT KNG. Rubber-steel gaskets
Rubber-steel gaskets have amassed a wide range of applications in sealing technology. Wherever the secure sealing of media with an exceptionally low leak rate, as well as low bolt loads at relatively low
More informationSINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationGSR - your partner for valve technology. Welcome to the world of valve technology. Your GSR Team
Welcome to the world of valve technology GSR - your partner for valve technology This is the world of solenoid valves, with and without explosion protection, of external medium-controlled valves and motorised
More informationSUITABLE FOR. Warm water EXAMPLES OF USE. Type approval ACS. Type approval WRAS (up to 85 C) Requirements. DIN DVGW guidelines DIN EN 1567 DIN 1988
Pressure reducing valves Series 682 9.4 682 Pressure reducing valves made of gunmetal with flange connections SUITABLE FOR Liquids neutral and non-neutral Air, gases and vapours neutral and non-neutral
More informationSITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
More informationIndex. Contact General information SANHA Group Application overview Terms and Conditions of Sale PIPING SYSTEMS
Index Contact General information SANHA Group Application overview Terms and Conditions of Sale IV V VI X XIII PIPING SYSTEMS stainless steel NiroSan - (Series 9000) 1 NiroSan Gas - (Series 17000) 2 NiroSan
More informationInstallation and operating instructions KEMPER Free-flow combination anti-pollution check valve EA Figure 145/146
Installation and operating instructions KEMPER Free-flow combination anti-pollution check valve EA Figure 145/146 Photo 1: Figure 145/146 0G Photo 2: Figure 145 1G 1. Application range The KEMPER Free-flow
More informationHydrants. Tab 2, page 1
Hydrants Tab 2, page 1 Hydrants Hydrants Made of ductile cast iron (SGCI) Introduction Hydrants made by Keulahütte GmbH in Krauschwitz are manufactured based on many years of design and development work
More informationProducts: Composite Hose Metall Hose Bellows, Compensators Swivel Joints Composite Hose. Metall Hose, Bellows and Compensators
Composite Hose Metall Hose Bellows, Compensators Swivel Joints Composite Hose Very flexible and easy to handle hoses for trucks, ships, railroad cars and industrial applications. Available in various designs
More informationRAUFUSION PP-R PLUMBING SYSTEM. Safer. Smarter. More Convenient
RAUFUSION PP-R PLUMBING SYSTEM Safer. Smarter. More Convenient SAFER Engineered for your safety and well being Safety is critical when choosing a suitable plumbing system. REHAU RAUFUSION consists of a
More informationSUITABLE FOR. Warm water EXAMPLES OF USE APPROVALS. Type approval ACS. Type approval WRAS (up to 85 C)
Pressure reducing valves Series 482 9.3 482 Pressure reducing valves made of stainless steel with flange connections SUITABLE FOR Liquids neutral and non-neutral Air, gases and vapours neutral and non-neutral
More informationButterfly valves PN6, PN10, PN16
4 136 Butterfly valves PN6, PN10, PN16 VKF46... Butterfly valves for fitting between counter-flanges Nominal pressures PN6, PN10, PN16 For fitting between PN6, PN10 or PN16 counter-flanges to ISO 7005
More informationVKD DualBlock 2-way Ball Valve
The VKD DualBlock ball valve is a fully unionised valve that stands up to the most severe industrial applications. Size range from /" / d6mm up to 2" / d6mm Pressure rating: Maximum working pressure: 6
More informationPipeline Accessories. Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes
Pipeline Accessories Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes Flange Gaskets Type RSG 4 pipes Reg.Nr. NG-5113CQ0574 Trinkwasser KTW/W270 Product Information RSG 4 pipes Rubber-Steel-Flange-Gasket
More informationManual Presetting Valves LENO MSV-B
Data Sheet Description LENO MSV-B is a new generation of manual valves for balancing flow in heating, cooling and domestic hot water systems. LENO MSV-B is a combined presetting and shut off valve with
More informationSITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
More informationPush-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented
Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented PE-100 / PVC-U pull-out resistant long type Push-Fit Transition Coupling for PE-100 and PVC-U water pipes up to 16 bar d90
More information2018 High Performance Check Valves for liquid and gaseous media
2018 High Performance Check Valves for liquid and gaseous media Check valves Catalogue 45 Date: 04/2018 WEH - We Engineer Hightech All rights reserved, WEH GmbH 2018. Unauthorized copies are strictly forbidden
More informationFLEXWELL Safety Pipe. Pipe systems for installations Technical details
Pipe systems for installations Technical details Notes 26.01.2015 T page 2 Contents 4.0 4.0 Contents 4.1 System description 4.100 System description FLEXWELL Safety Pipe 4.105 System description FLEXWELL
More informationItem Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
More informationPiping technology PE-Xc/Al/ PE-Xc/gunmetal/ PPSU
INT 4/ Catalogue /6 We reerve the right to effect change. Pexfit Pro Piping technology PE-Xc/Al/ PE-Xc/gunmetal/ PPSU Pre connector ytem for rinking water intallation in acc. with DIN 988 an D IN 0930
More informationSwing Check Valves - Series 41
Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.
More informationTable of contents. Chapter 1: Fusiotherm. Chapter 4: climasystem Produktgruppe 20. Chapter 5: aquatherm. Chapter 2: aquatherm SHT.
Table of contents Chapter 1: Fusiotherm 01 Fusiotherm -pipe 04 climatherm-pipe & aquatherm-lilac 07 Accessories 09 Fittings 15 Weld-in saddle 19 Threaded connections and accessories 22 Transition pieces
More informationInstrumentation Products Gauge Valves and Pressure Gauge Accessories
Instrumentation Products Gauge Valves and Pressure Gauge Accessories Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
More informationCOPRAX RANGE PIPES AND FITTINGS IN POLYPROPYLENE COP-RANDOM COPRAX. Comércio e Indústria do Plástico, Lda. AV. 16 DE MAIO Z.I.
COPRAX Comércio e Indústria do Plástico, Lda. AV. 16 DE MAIO Z.I. OVAR 3880 102 OVAR - PORTUGAL T +351 256 579 480 F +351 256 579 489 export@coprax.com www.coprax.com PIPES AND FITTINGS IN POLYPROPYLENE
More informationCombi-Seal Flange Isolation Gaskets 4 pipes
Combi-Seal lange Isolation Gaskets 4 pipes Pipeline Accessories lange Isolating Technology 4 pipes Isolating flange gaskets 4 pipes are especially designed for: Carbon steel Stainless steel Contact Corrosion
More informationBall valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
More information2/2 way Angle-Seat Valve for medium up to C, DN15-50
Type 2000 can be combined with 2/2 way Angle-Seat Valve for medium up to + 180 C, DN15-50 High flow rates Very high cycle life Clamp body according to EN ISO 2852, BS 4825 or ASME BPE For process valves
More informationCOMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
More informationMUV. VERTICAL MULTI-STAGE PUMPS 2 pole - 50 Hz APPLICATIONS ADVANTAGES OPERATING RANGES. Certified
OPERATING RANGES Flow rates of up to: 14 m 3 /h Manometric heads of up to: 137 m CE Max. operating pressure: 1 bar Max. intake pressure: 6 bar Temperature range: 15 to + 9 C Max. ambient temperature: +
More informationPipeline Accessories. Flange Isolation Gaskets 4 pipes
Pipeline Accessories Flange Isolation Gaskets 4 pipes Flange Isolation Gaskets 4 pipes Combi-Seal G and Combi-Seal TW High quality flange gasket and electrical isolation point Flange Isolation Gasket TA
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
More informationSprinkler Systems Installation Guide
Sprinkler Systems Installation Guide User Guide for Geberit Mapress Pipework Installations to LPC Rules for Automatic Sprinkler Installations (incorporating BS EN 1845). alid from 1. August 011 Contents
More informationThe right choice for your application. Pressure sensors from ifm.
The right choice for your application. Pressure sensors from ifm. Process sensors www.ifm.com/gb/pressure Systems for pressure monitoring. The optimum solution for every requirement. Pressure sensors with
More informationChibro Press Fit Stainless Steel Pipe and Fittings. Data Sheet
Chibro Press Fit Stainless Steel Pipe and Fittings General Information Data Sheet The Chibro Press Fit Pipe system permits the installation of a metal piping system in a reliable and economic way. The
More informationManual presetting valves LENO MSV-BD
Manual presetting valves LENO MSV-BD Description LENO MSV-BD is a range of manual valves for balancing flow in heating, cooling and domestic hot water systems. LENO MSV-BD is a combined presetting and
More information600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
More informationRAUTITAN - water, gas & heating PRODUCT BOOK. Valid from December Construction Automotive Industry
RAUTITAN - water, gas & heating PRODUCT BOOK www.rehau.com Valid from December 2011 Construction Automotive Industry RAUTITAN The New Generation RELIABLE. VERSATILE. SECURE. SYSTEM OVERVIEW The RAUTITAN
More information94D / 94F / 94M / 96M
94D / 94F / 94M / 96M - 2016 1 Meter Runs MBL 500 Application Meter runs combine inlet and outlet piping with a flow element which is used for flow measurement of one-phase aggressive and non-aggressive
More informationFULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationBall valves and shut off valves
Shut off valves HE Hand slide valves W Ball valves QH, manually actuated Ball valves VAPB, mechanically actuated Ball valves VAPB CR, mechanically actuated, corrosion resistant 2003/10 Subject to change
More informationproduct catalogue Q215 ISO 9001:2008 certified
product catalogue Q215 ISO 9001:2008 certified Haelok the company Haelok Inc, the inventor of one of the world strongest mechanical pipe connection, is a Zurich, Switzerland based privately held company,
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
More informationTest Coupling with Ball Check
Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring
More informationFULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
More information2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 220 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges ISO PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200
More informationSupplementary instructions. Mounting accessories, pressure measurement technology. Document ID: 43478
Supplementary instructions Mounting accessories, pressure measurement technology Document ID: 78 Contents Contents About this document.... Function.... Target group.... Symbols used... For your safety....
More informationGEMÜ 717 Manually operated ball valve
Manually operated ball valve Features igh flow rates Low weight Choice of various body materials and connection types vailable as shut off or control valve / and /way versions available Description The
More informationBall valve Type HKSF/GT PN 4
Type HKSF/GT PN 4 Ø D Internal thread Ø D SW 217-2000 3/4 20 50 80 46 217-2001 1 25 55 92 50 217-2002 1 1/4 32 81 117 55 217-2003 1 1/2 40 81 117 55 217-2004 2 50 93 131 70 Scope of application House lead-ins
More informationSTRAIGHT PERFORATED TRAY
STRAIGHT PERFORATED TRAY RETURNED EDGE TYPE RETURNED FLANGE TYPE NOTE: Other sizes are available upon request WIDTH (W) HEIGHT (H) 50 15 15 150 15 15 15 400 15 500 15 600 15 STRAIGHT CABLE TRAY STANDARD
More informationINDUSTRIAL FITTINGS - quick release couplings
NiTO 1/2-3/4-1 system - couplings for water Material: Chromium plated brass Working temp.: Up to +80 C Sealing: NBR - cannot be used with fuel and oil (option - Viton). For valve O-ring made of EPDM. High
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationSUITABLE FOR. Warm water EXAMPLES OF USE APPROVALS. Type approval ACS. Type approval WRAS (up to 85 C)
Pressure reducing valves Series 681 9.2 681 Pressure reducing valves made of gunmetal with threaded connections SUITABLE FOR Liquids neutral and non-neutral Air, gases and vapours neutral and non-neutral
More informationGEMÜ 710 Pneumatically operated ball valve
Pneumatically operated ball valve Features High flow rates Choice of various body materials and connection types Available as shut off or control valve / and /way versions available Description The / and/or
More informationProduct range Solex Technical data and dimensioning. 5 Years
Qualität made in Germany Product range Solex Technical data and dimensioning Quality made in Germany 5 Years Handwerkergarantie m anufacturer s warranty Product range Solex Dimensioning High-Flow system
More informationThermostatic actuator RAVI - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVI is self-acting thermostatic actuator primarily for use for temperature control of small hot water cylinders - either storage
More informationGrooved Butterfly Valves
Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600
More informationAVE WATER FOR GREEN FUTURE A B O U T U S HISTORY PRODUCTS AND SERVICES.
HISTORY A B O U T U S Skala family started the private business in 99. The founder of the company was Mr. Mihalj Skala. Generation after generation has continued to develop and improve the family tradition
More informationPRINETO Price List Prineto
PRINETO Price List Prineto Contents Pipes P. 4 Sleeves P. 16 Cuphin special fittings P. 17 Drinking water installation accessories P. 22 Heating installation accessories P. 51 Surface heating / cooling
More informationW PSC Press DN AS3688 PN-16. W PSC Press DN AS3688 PN-16 COPPER PRESS SYSTEM (WATER) TECHNICAL AND INSTALLATION GUIDE
26126 AS3688 PN-16 W PSC Press 26126 AS3688 PN-16 W PSC Press COPPER PRESS SYSTEM () TECHNICAL AND INSTALLATION GUIDE Products WE ARE HERE FOR THE LONG RUN AND SO ARE OUR PRODUCTS! At the Plumbers Supplies
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More informationDiaphragm Valve MV 310
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation
More informationPressure relief controller for oil V22D28 (PN 16, 25)
Data sheet Pressure relief controller for oil V22D28 (PN 16, 25) Description The controller has a control valve, an actuator with one control diaphragm and a spring for pressure setting. Features: - safe
More informationPRESS STAINLESS STEEL
PRESS STAINLESS STEEL UP TO 54 MM PRESS-FITTED WITH M OR V PROFILE! SUPERIOR PRICING & QUALITY 20 YEAR WARRANTY 12 MM - 108 MM PRODUCT CATALOGUE UK 015 PRODUCT CATALOGUE Press stainless steel Straight
More informationBIS HD 500 and 1501 Heavy Duty Clamps
BIS HD 500 and 1501 Heavy Duty Clamps walraven.com BIS Heavy Duty Clamps Gives strength to your installation! With or without lining The entirely renewed range BIS HD Clamps consists of type HD 1501 (with
More informationPRODUCT OVERVIEW FINE FILTER AND BACKFLOW PREVENTER
PRODUCT OVERVIEW FINE FILTER AND BACKFLOW PREVENTER 1 Fine filters activated carbon filters Fine filter FF Activated carbon filter AF Activated carbon cartridge Fine filter Rust and dirt particles, grains
More informationTwo-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
More informationTA-PILOT-R. Differential pressure controllers Pilot operated differential pressure controller with adjustable set-point
TA-PILOT-R Differential pressure controllers Pilot operated differential pressure controller with adjustable set-point IMI TA / Differential pressure controllers / TA-PILOT-R TA-PILOT-R The TA-PILOT-R
More informationSANITARY SELF-PRIMING PUMPS CLOSED COUPLED WITH STANDARD MOTOR A - AS SERIES SELF-PRIMING PUMPS. Series A-AS
SANITARY SELF-PRIMING PUMPS CLOSED COUPLED WITH STANDARD MOTOR SERIES A - AS SELF-PRIMING PUMPS Series A-AS CSF INOX SPA PREFACE AND WARNING This publication does not constitute a contract proposal or
More informationEISELE LIQUIDLINE PROGRAM CONNECTIONS FOR COOLING WATER
PROGRAM CONNECTIONS FOR COOLING WATER QUALITY SOLUTIONS MADE BY EISELE LIQUID 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 3,500 standard articles,
More informationDeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
BULLETIN 46.00-2B OCTOBER 2015 DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS - Materials of Construction - Specifications - Ordering - Dimensions
More informationWaste Water, Condensate and Heat Transfer Fluid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Fluid Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied,
More informationCatalogue Easy inside
Catal ogue 2.2010 The complete product range Mini Middle Page 4: Unifix Mini: The small, light and quick repair solution for sealing holes, fractures and porous areas in water-bearing pipes. Suitable for
More informationproduct catalogue Q116 ISO 9001:2008 certified
product catalogue Q116 ISO 9001:2008 certified Haelok the company Haelok fittings are considered the only mechanical alternative to welding. Haelok AG, the inventor of one of the world strongest mechanical
More information+ = Angle-seat Valve System for continuous control. Type 8802/2300 electro-pneumatically operated angle-seat valve
Angle-seat Valve System for continuous control Type 8802/2300 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Burkert 8802 continuous control valve + = 2300 series
More informationd z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
More informationType 526 IC CATALOG. Flanged Safety Relief Valves API Series. The-Safety-Valve.com
Type 526 IC Flanged Safety Relief Valves API Series CATALOG The-Safety-Valve.com General Information Overview API safety valves (LESER Type 526) are flanged safety valves that meet all the requirements
More informationFULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
More informationCombination angle valve with filter and angle valve with filter. By SCHELL.
Combination angle valve with filter and angle valve with filter. By SCHELL. Plant 1 Production with Administration Building and Training Centre Plant 2 Production with Logistic Centre SCHELL. The Company.
More information2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 High cycle life Flow optimised body in stainless steel 316L Deliverable with fl ow direction below or above seat Clean design
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More information