Piping technology steel
|
|
- Bertha Wilson
- 5 years ago
- Views:
Transcription
1 model no. page model no. page model no. page model no. page model no. page Prestabo with SC-Contur Piping technology steel 1 ZM_F1_int_en_ _105948_5.pdf :44:43
2 Press connector systems with press connectors and pipes made of non-alloy steel (E235), in acc. with EN , externally galvanised with a zinc layer thickness of 8 15 µm (blue chromatised). Press connectors All sizes with SC-Contur connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage. During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa 0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hpa 0.3 MPa. Marking Red symbol (to prevent confusion with Sanpress Inox (stainless steel) articles)»not for drinking water installations«sealing elements EPDM Dimensions/Material Standard sizes: d 12; 15; 18; 22; 28; 35; 42; 54 made of steel XL sizes: 64.0; 76.1; 88.9; made of steel Press system pipe versions System pipe made of non-alloy steel with the material number (E235), in acc. with EN externally zinc plated galvanised. System pipe made of non-alloy steel with the material number (E235), in acc. with EN externally galvanised with plastic coating made of polypropylene (PP) in white (RA L 9001). System pipe made of non-alloy steel with the material number (E220), in acc. with EN internally and externally sendzimir galvanised. Areas of application Heating systems Industrial and plant engineering Sprinkler units (sendzimir galvanised pipe) Compressed air units (sendzimir galvanised pipe) Solar systems Air-conditioning systems the following points should be observed during transport and storage: Packing and protective foil (only with PP coated pipes) should not be removed until immediately before use. The pipe ends must be closed with protective caps when delivered. Do not store the pipes directly on the bare floor. Do not stick any protective foils or plastics to the pipe surfaces. When loading and unloading, do not pull the steel pipes over the truck sill. Protection against external corrosion Prestabo pipes and connectors are protected by external galvanisation. In case of contact with dampness (condensation, precipitation during the construction phase, plaster and splash water etc.) or corrosive building materials (surfacer, levelling screed etc.), however this layer of zinc cannot provide permanent protection against external corrosion. The following protective measures are recommended: Use of closed-cell insulating tubes with professional sealing of all abutting and cut edges using a suitable filler. Damp-proofing of the laid pipe through separating foil in the floor construction. Installing pipes outside areas at risk of moisture. Visible radiator connections rising from the floors should be avoided if floors will be frequently cleaned with water and/or cleaning agents/disinfectants, for example in retirement homes and care homes as well as hospitals. Wall connections make cleaning easier and also exclude any additional risk of corrosion. If the radiator connections do come from the floor, professional corrosion protection and professional sealing of the joints must be ensured. If not, there is a possibility that the cleaning water will penetrate, which will moisten the insulation and present the risk of corrosion. If the measures in the examples above fail to provide permanent protection against dampness or the areas of use are connected with special requirements, e.g. in cooling circuits, complete external corrosion protection, which reliably prevents influences that lead to corrosion must be applied. Further detailed information and examples of use can be found in the practical handbook and on the internet. Use of the system for application areas and media other than those described here must be agreed with Viega Service Center. Operating conditions with EPDM sealing element Operating temperature max. 110 C Operating pressure max. 1.6 MPa (PN 16) Use of press tools The functional safety of the Viega press connector systems is primarily dependent on the perfect condition of the press tools and press machines used. For this reason, for the production of press connections, we recommend the use of Viega press tools and their regular inspection by authorised service points. Technical data Press connectors and components are constantly being optimised. If required, the current Z and installation dimensions can be obtained from the download area of the Viega homepage: viega.de/downloads Storage and transport To ensure the impeccable quality of the Prestabo steel pipes, 2 ZM_F1_int_en_ _105948_5.pdf :44:43
3 Prestabo with SC-Contur F1 F1 Index Elbows 4 T-pieces 7 Adapter pieces/adapter elbows 10 Couplings 13 Reductions 14 Screw fittings 14 Caps, plugs 16 Flanges 16 Line manifold, cross pieces 18 GTIN-Code (Global Trade Item Number, previously EAN-Code) The GTIN-Code composed out of the constant manufacturer number and a six-digit article code - in this example The exchange of the last six digits against the article code shows the GTIN-Code. 3 ZM_F1_int_en_ _105948_5.pdf :44:43
4 ELBOWS Prestabo Elbow 90 Model 1116 article d Z L Z* L* Z* = previous version L* = length of the previous version Prestabo XL Elbow 90 Model 1116XL article d Z L Prestabo Elbow 90 Model article d Z L1 L2 Z* L1* L2* Z* = previous version L* = length of the previous version Prestabo XL Elbow 90 Model XL article d Z L1 L ZM_F1_int_en_ _105948_5.pdf :44:44
5 Prestabo with SC-Contur F1 F1 Prestabo Elbow 45 Model 1126 article d Z L Z* L* Z* = previous version L* = length of the previous version Prestabo XL Elbow 45 Model 1126XL article d Z L Prestabo Elbow 45 Model article d Z L1 L2 Z* L1* L2* Z* = previous version L* = length of the previous version Prestabo XL Elbow 45 Model XL article d Z L1 L ZM_F1_int_en_ _105948_5.pdf :44:46
6 Prestabo Crossover Model article VdS d L1 L2 L3 L4 H VdS = VdS certification 6 ZM_F1_int_en_ _105948_5.pdf :44:46
7 Prestabo with SC-Contur F1 F1 T-PIECES Prestabo T-piece Model 1118 article d1 d2 d3 Z1 Z2 Z3 L1 L2 L ZM_F1_int_en_ _105948_5.pdf :44:47
8 Prestabo XL T-piece Model 1118XL article d1 d2 d3 Z1 Z2 Z3 L1 L2 L ZM_F1_int_en_ _105948_5.pdf :44:48
9 Prestabo with SC-Contur F1 F1 Prestabo T-piece Model article d1 Rp d2 Z1 Z2 Z3 L1 L2 L3 SS ½ ½ ½ ½ ¾ ½ ¾ ½ ¾ ½ ¾ ½ ¾ Prestabo XL T-piece Model XL article d1 Rp d2 Z1 Z2 Z3 L1 L2 L3 SS ¾ ¾ ¾ ¾ ZM_F1_int_en_ _105948_5.pdf :44:49
10 ADAPTER PIECES/ADAPTER ELBOWS Prestabo Adapter Model 1111 article d R L SS ⅜ ½ ⅜ ½ ¾ ½ ¾ ½ ¾ ½ ¾ ¼ ¼ ½ ¼ ½ Prestabo XL Adapter Model 1111XL article d R Z L SS ½ ½ Prestabo Adapter Model 1112 article d Rp Z L SS ⅜ ½ ⅜ ½ ¾ ½ ¾ ½ ¾ ½ ¾ ¾ ¼ ¼ ½ ZM_F1_int_en_ _105948_5.pdf :44:50
11 Prestabo with SC-Contur F1 F1 Prestabo XL Adapter Model 1112XL article d Rp Z L SS ½ ½ Prestabo Plug-in piece Model article d R L SS ⅜ ½ ½ ½ ¾ Prestabo Plug-in piece Model article d Rp Z L SS ½ ½ ¾ ½ ¾ Sanpress Adapter - gunmetal Model article DN d Z L1 L2 SS1 SS SS = Spanner size SS = spanner size 11 ZM_F1_int_en_ _105948_5.pdf :44:51
12 Prestabo Adapter elbow 90 Model 1114 article d R Z L1 L2 SS Z* L1* L2* SS* ⅜ ½ ⅜ ½ ½ ½ ¾ ¼ ½ Z* = previous version L* = length of the previous version SS* = previous version (spanner size) Prestabo Adapter elbow 90 Model article d R Z1 Z2 L1 L ⅜ ½ ⅜ ½ ½ ¾ Prestabo Adapter elbow 90 Model article VdS d Rp Z1 Z2 L1 L2 SS ⅜ ½ ½ ½ ½ ¾ VdS = VdS certification Prestabo Adapter elbow 90 Model article d Rp Z1 Z2 L1 L ½ ½ ½ ¾ ½ ¾ ZM_F1_int_en_ _105948_5.pdf :44:52
13 Prestabo with SC-Contur F1 F1 COUPLINGS Prestabo Coupling Model 1115 article d Z L Prestabo XL Coupling Model 1115XL article d Z L Prestabo Sliding coupling Model article d L INDmin INDmin = insertion depth minimum Prestabo XL Sliding coupling Model XL article d L INDmin INDmin = insertion depth minimum 13 ZM_F1_int_en_ _105948_5.pdf :44:53
14 REDUCTIONS Prestabo Reducer Model article d1 d2 Z L Prestabo XL Reducer Model XL article d1 d2 Z L SCREW FITTINGS Prestabo Screw fitting Model 1160 article d Z L SS1 SS SS = Spanner size SS = spanner size 14 ZM_F1_int_en_ _105948_5.pdf :44:54
15 Prestabo with SC-Contur F1 F1 Prestabo Adapter union Model 1165 article d R Z L SS1 SS ½ ¾ ¾ ¼ ½ SS = Spanner size SS = spanner size Prestabo Adapter union Model 1162 article d Rp Z L SS1 SS ½ ½ ¾ ¼ ½ SS = Spanner size SS = spanner size Prestabo Connection screw fitting Model 1163 article VdS d G Z L1 L2 SS ½ ¾ ¾ ¾ ¼ ½ ¼ ½ ½ ¾ ⅜ ½ VdS = VdS certification 15 ZM_F1_int_en_ _105948_5.pdf :44:55
16 CAPS, PLUGS Prestabo Cap Model 1156 article d Z L Prestabo XL Cap Model 1156XL article d Rp Z L1 L2 SS ¾ ¾ ¾ ¾ FLANGES Prestabo Flange adapter Model article DN d Z L W1 W2 Ø1 k Ø2 n Ø = diameter k = bolt circle diameter Ø = diameter n = number of holes 16 ZM_F1_int_en_ _105948_5.pdf :44:56
17 Prestabo with SC-Contur F1 F1 Prestabo XL Flange adapter Model XL article DN d Z L W1 W2 Ø1 k Ø2 n Ø = diameter k = bolt circle diameter Ø = diameter n = number of holes Prestabo Flange adapter Model 1159 article DN d Z L W1 W2 Ø1 k Ø2 n Ø = diameter k = bolt circle diameter Ø = diameter n = number of holes 17 ZM_F1_int_en_ _105948_5.pdf :44:57
18 Prestabo XL Flange adapter Model 1159XL article DN d Z L W1 W2 Ø1 k Ø2 n Ø = diameter k = bolt circle diameter Ø = diameter n = number of holes LINE MANIFOLD, CROSS PIECES Prestabo Line manifold Model article d1 d2 Z1 Z2 Z3 L1 L2 H1 H Prestabo Cross piece Model 1148 article d1 d2 Z1 Z2 Z3 L1 L ZM_F1_int_en_ _105948_5.pdf :44:58
19 order code page order code page order code page order code page order code page ZM_F1_int_en_ _105948_5.pdf :44:58
20 order code page order code page order code page order code page order code page 20 ZM_F1_int_en_ _105948_5.pdf :44:58
21 model no. page model no. page model no. page model no. page model no. page XL XL XL XL XL XL XL XL XL XL XL XL XL XL ZM_F1_int_en_ _105948_5.pdf :44:58
Piping technology copper/gunmetal
model no. page model no. page model no. page model no. page model no. page Profipress with SC-Contur Piping technology copper/gunmetal 1 ZM_A1_int_en_20170203_083425_5.pdf 1 03.02.2017 10:24:38 Press connector
More informationPiping technology stainless steel
model no. page model no. page model no. page model no. page model no. page Sanpress Inox G with SC-Contur Piping technology stainless steel 1 ZM_G2_int_en_20170106_082446_5.pdf 1 06.01.2017 10:08:51 Press
More informationPiping technology gunmetal
model no. page model no. page model no. page model no. page model no. page Sanpress with SC-Contur Piping technology gunmetal 1 ZM_G3_int_en_20170106_082446_5.pdf 1 06.01.2017 10:02:32 Press connector
More informationPiping technology stainless steel
model no. page model no. page model no. page model no. page model no. page Sanpress Inox with SC-Contur Piping technology stainless steel 1 ZM_G1_int_en_20170106_082446_5.pdf 1 06.01.2017 10:00:47 Press
More informationPiping technology plastic
model no. page model no. page model no. page model no. page model no. page Viega Smartpress Piping technology plastic 1 ZM_L6_int_en_20170314_131501_5.pdf 1 14.03.2017 15:31:15 Flow-optimised press connector
More informationPiping technology stainless steel
INT 4/ Catalogue 0/0 We reserve the right to effect changes. Sanpress Inox Piping technology stainless steel G Press connector system with press connectors an pipes mae of stainless steel material Nos..440
More informationTake O ff Dimensions. Profipress with SC- Contur. Pipe line systems / Pipe connection technology 12.8 /
A Take O ff Dimensions Pipe line systems / Pipe connection technology Profipress with SC- Contur 2.8 / 202 86529 www.viega.com A Take Off Dimensions Pipe line systems / Pipe connection technology Profipress
More informationSmartloop Connection Set. Instructions for Use from 07/2008. en_int
Smartloop Connection Set Instructions for Use Model Year built: 2276.1 from 07/2008 en_int Smartloop Connection Set 2 from 27 Table of contents Table of contents 1 About these instructions for use 4 1.1
More informationGlobo P. Ball valves Pump ball valve made of gunmetal
Globo Ball valves ump ball valve made of gunmetal IMI EIMEIER / Shut-off valves / Globo Globo Globo and Globo -S are used in pump warm water heating systems for direct connection to circulating pumps with
More informationINT 4/15 Catalogue 2015/2016 We reserve the right to effect changes. System press tools. Piping technology
INT 4/5 Catalogue 205/206 We reserve the right to effect changes. Piping technology P For all Viega press systems from d 2 08.0. Viega system press tools can be used with all metallic Viega press systems
More information4 01 ta l o g u e 2 Ca P R i c e L I S T
Catalogue 2014 The Complete Product Range The compression fittings: Our Gebo Quick the universal compression fittings are available for steel pipes of 1/2" to 2" diameter, for black steel pipes of 20 mm
More informationPRESS-FIT SYSTEM FOR SPRINKLER CONNECT WITH CONFIDENCE
PRESS-FIT SYSTEM FOR SPRINKLER CONNECT WITH CONFIDENCE CONNECT WITH CONFIDENCE With a wealth of expertise and the broadest range of solutions and systems on the market, Pegler Yorkshire s Connect products
More informationRubber-steel gaskets. Gasket profiles WG2 WG2P WL-HT KNG. Rubber-steel gaskets
Rubber-steel gaskets have amassed a wide range of applications in sealing technology. Wherever the secure sealing of media with an exceptionally low leak rate, as well as low bolt loads at relatively low
More informationInstallation and operating instructions KEMPER Free-flow combination anti-pollution check valve EA Figure 145/146
Installation and operating instructions KEMPER Free-flow combination anti-pollution check valve EA Figure 145/146 Photo 1: Figure 145/146 0G Photo 2: Figure 145 1G 1. Application range The KEMPER Free-flow
More informationNew! NiroTherm. Premium solution for corrosive environments. exclusively from SANHA
NiroTherm New! = Tool Compatibility + Push & Stay + Leak Path Feature exclusively from SANHA Premium solution for corrosive environments Optimal for heating, cooling and compressed air installations high
More informationAreas of Application of Metallic Installation Systems
Areas of Application of Metallic Installation Systems Information for planning and completion 566263 02.15 / 2016 Areas of application of metallic installation systems Conversion Bar / Pascal.............
More informationSupplementary instructions. Mounting accessories, pressure measurement technology. Document ID: 43478
Supplementary instructions Mounting accessories, pressure measurement technology Document ID: 78 Contents Contents About this document.... Function.... Target group.... Symbols used... For your safety....
More informationNiroSan -Press. Press systems from high-grade stainless steel Made in Germany
NiroSan -Press pressable with V, M and SA-profile Press systems from high-grade stainless steel Made in Germany NiroSan -Press system fittings and NiroSan system pipes in stainless steel with tool compatibility,
More informationMikrotherm F. Manual Radiator Valves With presetting
Mikrotherm F Manual Radiator Valves With presetting IMI HEIMEIER / Thermostatic Heads & Radiator Valves / Mikrotherm F Mikrotherm F The Mikrotherm F manual radiator valve is used in warm water pump heating
More informationPressure transmitter COMPACT ECOnomic
Pressure transmitter COMPACT ECOnomic for food/pharmaceutical/biotechnology, Type series CA1110 Features Digitale pressure transmitter Hygienic design according to EHEDG Case and wetted parts of stainless
More informationPRESSURIZED STEEL BOILER WITH REVERSED FLAME
smoke pipes PRESSURIZED STEEL BOILER WITH REVERSED FLAME OUTPUT RANGE from 340 to 7000 WORKING TEMPERATURE minimum return temperature 55 OPERATION WITH gas or oil fired jet burners MODELS 340 420 510 630
More informationFlow-Through Fitting ARF 215
Flow-Through Fitting ARF 215 Standard Models Model for Pressurized Sensors Latest Product Information: www.knick.de Warranty Defects occurring within 1 year from delivery date shall be remedied free of
More informationDA 50. Differential pressure controllers Adjustable set-point
DA 50 Differential pressure controllers Adjustable set-point IMI TA / Differential pressure controllers / DA 50 DA 50 These differential pressure controllers for heating and cooling systems are particularly
More informationGeneral Information Hydrants and Flushing Valves
General Information Hydrants and Flushing Valves Product Categories 4.1 Underground Hydrants 4-4 4.2 Above Gound Hydrants 4-10 4.3 Flushing Valves 4-13 www.hawle.de 4-3 4.1 Underground Hydrants www.hawle.de
More informationPressure relief controller for oil V22D28 (PN 16, 25)
Data sheet Pressure relief controller for oil V22D28 (PN 16, 25) Description The controller has a control valve, an actuator with one control diaphragm and a spring for pressure setting. Features: - safe
More informationSITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
More informationThermostatic radiator valves with presetting
Thermostatic radiator valves TRV-2, TRV-2S Thermostatic radiator valves with presetting Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING AVANTAGE Thermostatic radiator
More informationVA-7000 SERIES ACTUATOR
VA-7000 SERIES ACTUATOR DESCRIPTION VA-7000 series actuator is electromechanical product, and can be mounted on VB-7000 series valves. If with different connectors, it can be fitted with other kinds of
More informationFume cupboards and extraction devices
Fume cupboards and extraction devices Energy efficiency, maximum ergonomics and a larger internal workspace make working with our new fume cupboards even safer and more convenient. A new design together
More informationPressure relief controller AFA / VFG 2(1) (PN 16, 25, 40)
Data sheet Pressure relief controller AFA / VFG 2(1) (PN 16, 25, 40) Description The controller is a self-acting pressure relief controller primarily for use in district heating systems. The controller
More informationMono Flanged Type Long Face to Face
Year : Mono Flanged Type Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
More informationDifferential pressure controller (PN 16, 25, 40) AFP(-9) / VFG 2(1) return and flow mounting, adjustable setting
Data sheet Differential pressure controller (PN 16, 25, 40) AFP(-9) / VFG 2(1) return and flow mounting, adjustable setting Description The controller has a control valve, an actuator with one control
More informationCombination angle valve with filter and angle valve with filter. By SCHELL.
Combination angle valve with filter and angle valve with filter. By SCHELL. Plant 1 Production with Administration Building and Training Centre Plant 2 Production with Logistic Centre SCHELL. The Company.
More informationDatasheet ERHARD ECLI butterfly valve
Datasheet ERHARD ECLI butterfly valve Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial applications: One of these is the gate valve, which was developed
More informationShort Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Short) Series 120. Document : S120 Revision : 2 Year : 2014
Year : Short Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description
More informationIndex. Contact General information SANHA Group Application overview Terms and Conditions of Sale PIPING SYSTEMS
Index Contact General information SANHA Group Application overview Terms and Conditions of Sale IV V VI X XIII PIPING SYSTEMS stainless steel NiroSan - (Series 9000) 1 NiroSan Gas - (Series 17000) 2 NiroSan
More informationGas and air filter. GF/1: Rp 1/2 - Rp 2 GF/3: DN 40 GF/4: DN 50 - DN 100 GF: DN DN 200
Gas and air filter GF/1: Rp 1/2 - Rp 2 GF/3: DN 40 GF/4: DN 50 - DN 100 GF: DN 125 - DN 200 11.02 Printed in Germany Edition 01.18 Nr. 215 203 1 8 Technical description Filter for interior gas lines as
More informationHorizontal And Vertical Centrifugal Pumps
Horizontal And Vertical Centrifugal Pumps Lip Bellow Type JP-840 Series Horizontal Centrifugal Pumps are driven by a direct-coupled motor (maximum 3,000 rpm). They are especially suitable for the rapid
More informationFlow-compensated temperature controller AVTQ DN 15
Data sheet Flow-compensated temperature controller AVTQ DN 15 Description AVTQ is a self-acting flow-compensated temperature controller primarily for use in district heating systems with plate heat exchangers
More informationSH Stainless Steel Piping System
Stainless Steel Piping Systems SH Stainless Steel Piping System 2018 PRICE LIST Industrial Applications Heating Compressed Air Closed Water Circulation Systems ry Fire Water Mains Solar SH system pipes
More informationEFFICIENCY IN SOLAR APPLICATIONS
EFFICIENCY IN SOLAR APPLICATIONS Powered by TCPDF (www.tcpdf.org) Join split technology reduces cost and saves time of assembly Coating provides good resistance to UV radiation and mechanical impact Integrated
More informationSpiroflex spiral-wound gaskets
Spiral-wound gaskets have long been used as sealing elements in refineries, chemical plants, gas installations, water treatment plants and in general pipeline construction. Spiroflex gaskets SpV retain
More informationPneumatic operated 2/2-way Diaphragm Valve
Pneumatic operated 2/2-way Valve Light tube valve body Flow optimised body in stainless steel Zero dead volume Easy to weld Type can be combined with... Type 8640/8644 Type 6012/6014 P Type 8311 Electrical
More informationBonded Liner Butterfly Valve Double Flanged Type Series 150
Year : Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Design Technical Data Description : GV
More informationMUV. VERTICAL MULTI-STAGE PUMPS 2 pole - 50 Hz APPLICATIONS ADVANTAGES OPERATING RANGES. Certified
OPERATING RANGES Flow rates of up to: 14 m 3 /h Manometric heads of up to: 137 m CE Max. operating pressure: 1 bar Max. intake pressure: 6 bar Temperature range: 15 to + 9 C Max. ambient temperature: +
More informationThe right choice for your application. Pressure sensors from ifm.
The right choice for your application. Pressure sensors from ifm. Process sensors www.ifm.com/gb/pressure Systems for pressure monitoring. The optimum solution for every requirement. Pressure sensors with
More informationTA-PILOT-R. Differential pressure controllers Pilot operated differential pressure controller with adjustable set-point
TA-PILOT-R Differential pressure controllers Pilot operated differential pressure controller with adjustable set-point IMI TA / Differential pressure controllers / TA-PILOT-R TA-PILOT-R The TA-PILOT-R
More informationTHROTTLE VALVES FOR RELAYS AND RADIATORS Series 2009
THROTTLE VALVES FOR RELAYS AND RADIATORS Series 2009 1General Features 1.1Characteristics The butterfly valves, metal to metal sealing withy thin blade(or full tightening type, with o-ring blade), are
More informationDifferential pressure relief controller (PN 16, 25, 40) AFPA / VFG 2(1)
Data sheet Differential pressure relief controller (, 25, 40) AFPA / VFG 2() Description The controller has a control valve, an actuator with one control diaphragm and spring for differential pressure
More informationPIPE LOG BOOK. Project no:... Project:... Construction section:... On behalf of:... Commissioned by:... Order no:... Date:... Construction period:...
FW-FERNWÄRME-TECHNIK GmbH Grafftring 2-6 D-29227 Celle Tel.: + 49 5141 888 88-0 Fax: + 49 5141 888 88-22 E-Mail: info@fw-gmbh.de Internet: www.fw-gmbh.de PIPE LOG BOOK... Project:... Construction section:...
More informationKnife gate valve SLF. Data is only for informational purpose. All specifications are subject to change without notice issue 3
Knife gate valve SLF Data is only for informational purpose. All specifications are subject to change without notice. V R 1 2013-02-15 issue 3 Knife gate valve SLF Stafsjö s knife gate valve SLF is a flanged
More informationApplication technology, 5th edition. Volume III: Fonterra radiant heating and cooling
Application technology, 5th edition Volume III: Fonterra radiant heating and cooling Regulation components, manifolds and manifold cabinets Regulation components, manifolds and manifold cabinets System
More informationDIAL DAMPER REGULATOR SET (1/4 ) Product Data Sheet
DIAL DAMPER REGULATOR SET (/4 ) Elgen s Dial Damper Regulator Set is used for controlling the damper inside the ductwork. /4 regulator sets for dampers up to 0. Quick and easy installation Kit Components
More informationEISELE LIQUIDLINE PROGRAM CONNECTIONS FOR COOLING WATER
PROGRAM CONNECTIONS FOR COOLING WATER QUALITY SOLUTIONS MADE BY EISELE LIQUID 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 3,500 standard articles,
More informationRTL. Floor Heating Controller Return temperature limiter with and without presetting
RTL Floor Heating Controller Return temperature limiter with and without presetting IMI HEIMEIER / Floor Heating Control / RTL RTL Among other things, the return temperature limiter RTL is used to limit
More informationSafety Shock Absorbers SCS33 to SCS64
Safety Shock Absorbers SCS33 to SCS64 1 Operating Instruction SCS33-25EU SCS33-50EU SCS45-25EU SCS45-50EU SCS45-75EU Rod Button SCS64-50EU SCS64-100EU SCS64-150EU Integrated Rod Seals Main Bearing Content
More informationW PSC Press DN AS3688 PN-16. W PSC Press DN AS3688 PN-16 COPPER PRESS SYSTEM (WATER) TECHNICAL AND INSTALLATION GUIDE
26126 AS3688 PN-16 W PSC Press 26126 AS3688 PN-16 W PSC Press COPPER PRESS SYSTEM () TECHNICAL AND INSTALLATION GUIDE Products WE ARE HERE FOR THE LONG RUN AND SO ARE OUR PRODUCTS! At the Plumbers Supplies
More informationTable of contents. Chapter 1: Fusiotherm. Chapter 4: climasystem Produktgruppe 20. Chapter 5: aquatherm. Chapter 2: aquatherm SHT.
Table of contents Chapter 1: Fusiotherm 01 Fusiotherm -pipe 04 climatherm-pipe & aquatherm-lilac 07 Accessories 09 Fittings 15 Weld-in saddle 19 Threaded connections and accessories 22 Transition pieces
More informationFLEXWELL Safety Pipe. Pipe systems for installations Technical details
Pipe systems for installations Technical details Notes 26.01.2015 T page 2 Contents 4.0 4.0 Contents 4.1 System description 4.100 System description FLEXWELL Safety Pipe 4.105 System description FLEXWELL
More informationLong Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Long) Series 130. Document : S130 Revision : 3 Year : 2014
Year : Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More informationCombi-Seal Flange Isolation Gaskets 4 pipes
Combi-Seal lange Isolation Gaskets 4 pipes Pipeline Accessories lange Isolating Technology 4 pipes Isolating flange gaskets 4 pipes are especially designed for: Carbon steel Stainless steel Contact Corrosion
More informationSUITABLE FOR. Warm water EXAMPLES OF USE. Type approval ACS. Type approval WRAS (up to 85 C) Requirements. DIN DVGW guidelines DIN EN 1567 DIN 1988
Pressure reducing valves Series 682 9.4 682 Pressure reducing valves made of gunmetal with flange connections SUITABLE FOR Liquids neutral and non-neutral Air, gases and vapours neutral and non-neutral
More information2/2 way Angle-Seat Valve for medium up to C, DN15-50
Type 2000 can be combined with 2/2 way Angle-Seat Valve for medium up to + 180 C, DN15-50 High flow rates Very high cycle life Clamp body according to EN ISO 2852, BS 4825 or ASME BPE For process valves
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationDOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationRAUFUSION PP-R PLUMBING SYSTEM. Safer. Smarter. More Convenient
RAUFUSION PP-R PLUMBING SYSTEM Safer. Smarter. More Convenient SAFER Engineered for your safety and well being Safety is critical when choosing a suitable plumbing system. REHAU RAUFUSION consists of a
More informationThermowell for temperature sensors omnigrad M TW 13
Technical information TI 264T/02/en 60019743 Thermowell for temperature sensors omnigrad M TW 13 Pipe thermowell Flanged process connection Omnigrad M TW 13 thermowells are designed for the use in the
More informationData sheet: Wilo-Drain TP 65 F 91/11 (1~230 V)
Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V) Pump curves Wilo-Drain TP 65 F - 50 Hz - 2900 rpm Unit Max. delivery head H max 9.5 m Max. volume flow Q max 36 m 3 /h Optimal delivery head H opt 6.0 m Optimum
More informationPRINETO Price List Prineto
PRINETO Price List Prineto Contents Pipes P. 4 Sleeves P. 16 Cuphin special fittings P. 17 Drinking water installation accessories P. 22 Heating installation accessories P. 51 Surface heating / cooling
More informationEnglish. Instruction and operation manual S 212. Dew point sensor
English Instruction and operation manual S 212 Dew point sensor Dear Customer, thank you for choosing our product. The operating instructions must be read in full and carefully observed before starting
More informationMotorized CEPEX EXTREME Ball Valve
AVA Electric Actuator Overview The AVA electric actuator range is instantly recognisable with its orange and gray compact housing, and LED screen. This small sized actuator is feature rich and allows users
More informationk VS DN (mm) Connections ( C) (m 3 /h)
Data sheet Differential pressure and flow controller (PN 16, 25, 40) AFPQ / VFQ 2( - return mounting, adjustable setting AFPQ 4 / VFQ 2( - flow mounting, adjustable setting Description The controller has
More informationSE 655 N-GEFFT0AM Digital Toroidal Conductivity Sensor
User Manual English SE 655 N-GEFFT0AM Digital Toroidal Conductivity Sensor Memosens Protocol Latest Product Information: www.knick.de 2 Safety Instructions WARNING Failure to observe this warning may result
More informationSelf-operated Temperature Regulators Type 1u Temperature Regulator
Self-operated Temperature Regulators Type 1u Temperature Regulator Version according to ANSI Application Temperature regulators for cooling plants Control thermostats for set points 1) from 15 to 480 F
More informationPressure gauge per EN with mounted diaphragm seal With SMS threaded connection Model DSS19F
Pressure Pressure gauge per EN 837-1 with mounted diaphragm seal With SMS threaded connection Model DSS19F WIKA data sheet DS 95.21 Applications Hygienic pressure measurement in sanitary applications for
More informationPressure independent control valve with integrated flow limiter AVQM (PN 16) - return and flow mounting
Data sheet Pressure independent control valve with integrated flow limiter AVQM (PN 16) - return and flow mounting Description Controllers are used together with Danfoss electrical actuators: AMV 0 1)
More informationSUITABLE FOR. Warm water EXAMPLES OF USE APPROVALS. Type approval ACS. Type approval WRAS (up to 85 C)
Pressure reducing valves Series 482 9.3 482 Pressure reducing valves made of stainless steel with flange connections SUITABLE FOR Liquids neutral and non-neutral Air, gases and vapours neutral and non-neutral
More informationPressure relief controller AVA (PN 25)
Data sheet Pressure relief controller AVA (PN 25) Description AVA is a self-acting pressure relief controller primarily for use in district heating systems. The controller is normally closed and opens
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
More informationVdS-Guidelines for water extinguishing systems. VdS en. Sprinkler Pumps. Requirements and test methods. VdS en : (03)
VdS-Guidelines for water extinguishing systems VdS 2100-07en Sprinkler Pumps Requirements and test methods VdS 2100-07en : 2013-05 (03) Publisher: VdS Schadenverhütung GmbH Publishing house: VdS Schadenverhütung
More informationExcess pressure regulator Excess pressure regulator, straight through DN
ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm
More informationProducts: Composite Hose Metall Hose Bellows, Compensators Swivel Joints Composite Hose. Metall Hose, Bellows and Compensators
Composite Hose Metall Hose Bellows, Compensators Swivel Joints Composite Hose Very flexible and easy to handle hoses for trucks, ships, railroad cars and industrial applications. Available in various designs
More information2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 220 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges ISO PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200
More informationSelf-operated Temperature Regulators Type 1u Temperature Regulator
Self-operated Temperature Regulators Type 1u Temperature Regulator ANSI version Application Temperature regulators for cooling installations Control thermostats for set points 1) from 15 to 480 F ( 10
More informationDifferential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
More informationSolenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections
/-way Diaphragm Valve with plastic body, pneumatically operated, 1/ 3 with true union 3 with fl ange pplications with aggressive media Flow optimised body with zero dead volume Self draining installation
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
More informationUnit Magnetic/Bag Filters
Unit Magnetic/Bag Filters 1-100 mikron/7-210 m 3 /h HiFlux Magnetic/Bag Filter Units are used where there is a need for a complete solution for removal of magnetic particles and combine the advantages
More informationSelf-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points from 0 to 250 C G ½ to G or DN 5 to DN
More informationRUBBER BELLOWS TYPE 1A & 1S SERIES
RUBBER BELLOWS TYPE 1A & 1S SERIES Description: Vibracoustics Ltd Reiflexa Bellows are made from various elastomers reinforced with high tensile textile or steel cords to provide the flexible elements
More informationØ mm. SYSTEM KAN-therm. High quality for reasonable price TECHNOLOGIA SUKCESU ISO 9001
Ø 16 110 mm SYSTEM KAN-therm PP High quality for reasonable price TECHNOLOGIA SUKCESU ISO 9001 Contents 3 KAN-therm PP System The material... 102 Sanitary systems installation... 102 Pipes... 103 Thermal
More informationSelf-operated Pressure Regulators Type Universal Pressure Reducing Valve
Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN
More informationNingbo GC Bob Instrument Co., Ltd. Diaphragm Seals. Administrator 2014/4/13
Ningbo GC Bob Instrument Co., Ltd. Diaphragm Seals Administrator 2014/4/13 INDEX Brief:... 2 Configuration Principle... 3 Level Difference of diaphragm pressure gauge seals liquid... 4 The temperature
More informationAPI CATALOG. Flanged Safety Relief Valves Series 526. The-Safety-Valve.com
API Flanged Safety Relief Valves Series 526 CATALOG The-Safety-Valve.com NH 3 HCL Product Range LESER Safety Valves for every industrial application API High Performance Series 526 Type 526 Compact Performance
More informationINSERTION Adaptor for analysis
INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More information