Ningbo GC Bob Instrument Co., Ltd. Diaphragm Seals. Administrator 2014/4/13
|
|
- Magnus Bell
- 5 years ago
- Views:
Transcription
1 Ningbo GC Bob Instrument Co., Ltd. Diaphragm Seals Administrator 2014/4/13
2 INDEX Brief:... 2 Configuration Principle... 3 Level Difference of diaphragm pressure gauge seals liquid... 4 The temperature influence of a diaphragm pressure gauge... 5 Products... 6 Diaphragm Seals With Threaded Connection... 6 I-Shape Flange... 9 Open Flange Angle Adjustable Extended Diaphragm Seals With Flanged Connection Sanitary diaphragm seals Welded One-piece Diaphragm Seals In-Line-Type Diaphragm Seals To Fit Standard Flanges In Line Diaphragm Seals Cell-Type Diaphragm Seals Threaded design, Mini seal Plastic body, threaded design Plastic body, threaded design Pulp and paper industry design Pulp and paper industry design Homogenizing industry design Liquid level gauge Corrosion-Proof Properties of diaphragm pressure gauge
3 Brief: Series YTP diaphragm pressure gauge (chemical seals) is composed of a conventional pressure measuring instrument, a connector and a diaphragm seal. This combination enables a general purpose pressure gauge to measure media of strong corrosion, high temperature, high viscosity, containing suspended matter or crystallizing. Diaphragm gauges are universally used in petrochemical, alkali, chemical fiber, pharmaceutical, metallurgical, and food industries. 2
4 Configuration Principle This illustration shows the operating principle of the diaphragm pressure gauge. The diaphragm is deflected by the pressure of medium P, and an equivalent pressure P is generated. With transmitting through working fluid, the pressure P deflect the elastic element of a pressure measuring instrument which thereafter shows the pressure value. 3
5 Level Difference of diaphragm pressure gauge seals liquid When a diaphragm pressure gauge is mounted with pressure gauge and diaphragm seal at different positions, the effect of level difference should be taken into consideration (especially for a diaphragm gauge with capillary). As the illustration shows, with a S.G. of the working fluid at approx. 1, and a level difference of 1m, the pressure difference is approx. 0.01MPa/cm2. 4
6 The temperature influence of a diaphragm pressure gauge The temperature influence of a diaphragm pressure gauge is relative to expansion coefficient of the seals working fluid, rigidity of the diaphragm, and temperature of pressed part. When working temperature deviates from 20 ± 5, the indication varies within 0.1%/ for rigid system, and within L%/ (L-length of capillary in m.) for flexible system(remote mounting). Diaphragm pressure gauges are filled with suitable working fluid according to different operating conditions. 5
7 Products Diaphragm Seals With Threaded Connection Specifications Range: FMH 0-10/0-40MPa FMM 0-1/0-10MPa FMS -1-0/0-0.6MPa Accuracy: (add to instrument accuracy) ± 0.5% for direct mounting; ± 1% for dampeners, over pressure protector, distance transmission and so on. Working Temperature: Diaphragm material: Hastelloy B, Hastelloy C, Tantalum,Titanium, Monel 316L PTEE coated Wetted material:321, 304, 316L(or+PTFE) Connection: Thread M20*1.5,1/2 NPT other on request 6
8 Filling liquid: As different media, optional fluorocarbon oil, , Food oil, DIMENSIONS (mm) φ dm=56,range:-0.1~0 / 0~4MPa φ dm=36,range:0~1.6 / 0~40MPa 7
9 8
10 I-Shape Flange Specifications Range: φ dm=56-0.1~0 / 0~40MPa φ dm=36 0~1.6 / 10~40MPa Accuracy: (add to instrument accuracy) ± 0.5% for direct mounting; ± 1% for dampeners, over pressure protector, distance transmission and so on. Working Temperature: Diaphragm material: Hastelloy B, Hastelloy C, Tantalum,Titanium, Monel 316L PTEE coated Wetted material:321, 304, 316L(or+PTFE) Connection: Thread M20*1.5,1/2 NPT other on request Filling liquid: Silicone oil, luorocarbon oil,food oil 9
11 DIMENSIONS (mm) φ dm=56,range:-0.1~0 / 0~4MPa φ dm=36,range:0~1.6 / 0~40MPa 10
12 φ dm=49,range:-0.1~0 / 0~4MPa φ dm=30,range:0~1.6 / 0~40MPa 11
13 Flange [GB/T ] Flange [ANSI B16.5] 12
14 Open Flange Specifications Range: /0-40MPa Accuracy: (add to instrument accuracy) ± 0.5% for direct mounting; ± 1% for dampeners over pressure protector, distance transmission and so on. Working Temperature: Diaphragm material: Hastelloy B, Hastelloy C, Tantalum,Titanium, Monel 316L PTEE coated Flange material:321, 304, 316L Instrument connection: Thread M20*1.5,1/2 NPT other on request Flange standard: GB/T JB/T HG ANSI B 16.5 DIN 2501 Filling liquid: Silicone oil, luorocarbon oil,food oil Capillary: max length 6m, material 321 covered with 321armour, other on request 13
15 14
16 DIMENSIONS (mm) F2A DN 25 或 DN 1 15
17 F2B DN 15 或 DN 3/4 [GB/T ] 16
18 [ANSI B16.5] 17
19 Angle Adjustable Specifications Range: /0-40MPa Accuracy: (add to instrument accuracy) ± 0.5% for direct mounting; ± 1% for dampeners over pressure protector, distance transmission and so on. Working Temperature: Diaphragm material: Hastelloy B, Hastelloy C, Tantalum,Titanium, Monel 316L PTEE coated Flange material:321, 304, 316L Instrument connection: Thread M20*1.5,1/2 NPT other on request Flange standard: GB/T JB/T HG ANSI B 16.5 DIN 2501 Filling liquid: Silicone oil, fluorocarbon oil, Food oil Capillary: max length 6m, material 321 covered with 321armour, other on request 18
20 DIMENSIONS (mm) Open flange A style DN 25 or DN 1 φ dm=56/49, range:-0.1~0 / 0~4MPa φ dm=36/30, range:0~1.6 / 0~40MPa A style DN 40 or DN 2 19
21 A style DN 25 or DN 1 20
22 Flange [GB/T ] Flange [ANSI B16.5] 21
23 Extended Diaphragm Seals With Flanged Connection Specifications Range: /0-40MPa Accuracy: (add to instrument accuracy) ± 0.5% for direct mounting; ± 1% for dampeners, over pressure protector, distance transmission and so on. Working Temperature: Diaphragm material: Hastelloy B, Hastelloy C, Tantalum,Titanium, Monel 316L PTEE coated Flange material: 321, 304, 316L Instrument connection: Thread M20*1.5,1/2 NPT other on request Flange standard: GB/T JB/T HG ANSI B 16.5 DIN 2501 Extension: 0-300mm Filling liquid: Silicone oil, fluorocarbon oil, Food oil Capillary: max length 6m, material 321 covered with 321armour, other on request 22
24 23
25 DIMENSIONS (mm) F5 A style DN 40 or DN 2 24
26 F5 B style 25
27 Flange [GB/T ] Flange [ANSI B16.5] 26
28 Sanitary diaphragm seals Specifications Range: FNH (0-10/0-40MPa) FNM (0-1/0-10MPa) FNS (-1-0/0-0.6MPa) Accuracy: (add to instrument accuracy) ± 0.5% for direct mounting; ± 1% for dampeners over pressure protector, distance transmission and so on. Working Temperature: Diaphragm material: Hastelloy B, Hastelloy C, Tantalum,Titanium, Monel 316L PTEE coated Wetted material:321, 304, 316L(or+PTFE) Connection: Thread M20*1.5,1/2 NPT, other on request Filling liquid: Silicone oil, fluorocarbon oil, Food oil. 27
29 DIMENSIONS (mm) 28
30 Welded One-piece Diaphragm Seals Specifications Range: FMH 0-10/0-40MPa FMM 0-1/0-10MPa FMS: -1-0/0-0.6MPa Accuracy: (add to instrument accuracy) ± 0.5% for direct mounting; ± 1% for dampeners over pressure protector, distance transmission and so on. Working Temperature: Diaphragm material: Hastelloy B, Hastelloy C, Tantalum,Titanium, Monel 316L Body material:321, 304, 316L, PTEE coated Connection: Thread M20*1.5,1/2 NPT, other on request Filling liquid: Silicone oil, fluorocarbon oil, food oil. 29
31 30
32 DIMENSIONS (mm) 31
33 In-Line-Type Diaphragm Seals To Fit Standard Flanges Specifications: Range: /0-40MPa Accuracy: (add to instrument accuracy) ± 0.5% for direct mounting; ± 1% for dampeners over pressure protector, distance transmission and so on. Working Temperature: Diaphragm Material: 316L Body material: 316 Process connection: Thread M20*1.5,1/2 NPT Flange standard: GB/T JB/T HG ANSI B 16.5 DIN 2501 Filling liquid: Silicone oil Application: Direct, permanent installation in pipelines, for flowing media, especially for dead space measuring points 32
34 In Line Diaphragm Seals Specifications Range: /0-25MPa(see the table) Accuracy: (add to instrument accuracy) ± 0.5% for direct mounting; ± 1% for dampeners over pressure protector, distance transmission and so on. Working Temperature: Diaphragm material: Hastelloy B, Hastelloy C, Tantalum,Titanium, Monel 316L PTEE coated Wetted material: 316+PTEE Process connection: welded other on request Standard: ANSI B36.1 Filling liquid: Silicone oil, fluorocarbon oil, Food oil Capillary: max length 6m, material 321 covered with 321armour, other on request Hold temperature: Threaded connection, Thread can be made request DIMENSIONS (mm) Standard Welded Type 33
35 Standard Flanged Type 34
36 Hold Temperature Welded Type 35
37 (GB/T ) 36
38 Cell-Type Diaphragm Seals Specifications Range: /0-40MPa Accuracy: (add to instrument accuracy) ± 0.5% for direct mounting; ±1% for dampeners over pressure protector, distance transmission and so on. Working Temperature: Diaphragm material: Hastelloy B, Hastelloy C, Tantalum,Titanium, Monel 316L Body material: 321, 304, 316L, PTEE coated Instrument connection: Thread M20*1.5,1/2 NPT, other on request Flange standard: GB/T JB/T HG ANSI B 16.5 DIN 2501 Filling liquid: Silicone oil, fluorocarbon oil, Food oil. Capillary: max length 6m, material 321 covered with 321armour, other on request DIMENSIONS (mm) 37
39 Flange (GB/T ) Flange (ANDI B 16.5) 38
40 Threaded design, Mini seal Specifications Pressure rating Maximum (bar): PN 400 Process connection: 1/4",1 /2", Female Diaphragm material: Hastelloy B, Hastelloy C, Tantalum,Titanium, Monel 316L Body material:321, 304, 316L, PTEE coated Wetted material: Stainless steel Diaphragm construction: Inside body Process connection: 1/4",1 /2", Female Filling liquid: Silicone oil, fluorocarbon oil, food oil. Options/notes: Special diaphragm or wetted parts on request Model DCS110 without flushing port 39
41 Plastic body, threaded design Specifications Process connection: 1/2" Male/Female Pressure rating Maximum (bar): PN 10 Body material: Plastic Wetted material: Viton Diaphragm construction: Inside body Options/notes: Model DCS121 with stainless steel upper body, PVC lower body, stainless steel diaphragm with PTFE foil 40
42 41
43 Plastic body, threaded design Specifications Process connection: 1/4" female Pressure rating Maximum (bar): PN 10 Body material: Plastic Wetted material: Viton Diaphragm construction: Inside body 42
44 Pulp and paper industry design Specifications Process connection: Special flange, dia 85mm Pressure rating Maximum (bar): PN 40 Body material: Stainless steel Wetted material: Stainless steel Diaphragm construction: Flush with body Options/notes: Pressure gauge mounting straight or with elbow 43
45 Pulp and paper industry design Specifications Process connection: Special flange and diaphragm design Pressure rating Maximum (bar): PN 40 Body material: Stainless steel Wetted material: Stainless steel Diaphragm construction: Flush with body Options/notes: Combine with 63mm pressure gauge 44
46 Homogenizing industry design Specifications Process connection: Block flange Pressure rating Maximum (bar): PN 600 Body material: Stainless steel Wetted material: Stainless steel Diaphragm construction: Flush with body Application: Combine with bourdon tube pressure gauges for homogenizing industry 45
47 Liquid level gauge Specifications: Process connection: 93mm OD flange Pressure rating Maximum (bar): PN 2 Body material: Stainless steel Wetted material: Stainless steel Diaphragm construction: Flush with body Options/notes: Application: Measure the pressure of liquid tank 46
48 Corrosion-Proof Properties of diaphragm pressure gauge Bright Instruments Diaphragm Pressure Gauge satisfies customers requirements of both environmental conditions and flow conditions (corrosive media) based on its significant corrosion-proof properties. Choose various pressure gauges combined with appropriate separator according to environmental conditions. Choose material of diaphragm and housing compatible with corrosive media. Options for diaphragm material 47
SHDP/GP Differential Pressure/Pressure Transmitter with Remote Diaphragm seals
SHDP/GP Differential Pressure/Pressure Transmitter with Remote Diaphragm seals SHDP/GP Differential Pressure/Pressure Transmitter with Remote Diaphragm seals provides a kind of reliable measuring way to
More informationACCESSORIES AND DIAPHRAGM SEAL
ACCESSORIES AND DIAPHRAGM SEAL TA102 TA201 TA202 TA203 TD101 TD103 TD104 TD202 Data sheet H20022a 05/2017 TD301 TD302 TD303 Trafag Italia Srl Via Cremona 1 20025 Legnano (Mi) Tel. +39 0331 59 23 97 Fax
More informationDifferential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
More informationProcess Industry. Diaphragm Seal Solutions
Process Industry Diaphragm Seal R Overview Diaphragm Seal Systems Provide Protection to Ensure Safety, Reliability Diaphragm seal systems protect gauges from hot, viscous, contaminated or corrosive media.
More informationDIAPHRAGM SEALS. MHP SERIES MINI HIGH PRESSURE Mini diaphragm seal for pressures up to 6000 psi
DIAPHRAGM SEALS seals, also referred to as isolators or chemical seals, are used to protect instruments from viscous, corrosive or very high temperature process media. PIC stocks, fills and calibrates
More informationSelection and Types of 1199 Remote Mount Seal Systems
General Specifications and Datasheet 1199 Diaphragm Seal GSD- 1199DS-EV01 Selection and Types of 1199 Remote Mount Seal Systems Product Introduction Differential pressure transmitter assembly with remote
More informationDifferential Pressure Gauge
DA03 Differential Pressure Gauge The DA 03 is a versatile differential pressure gauge which can be configured with various optional features, such as: Adjustable limit contacts: delayed action or magnet
More informationPressure Measurement Remote seals for transmitters and pressure gauges
Siemens pplication The remote seals MF.. can be fitted to SITRNS P transmitters for pressure (SITRNS P, P, DSIII and P), absolute pressure (SITRNS P and DSIII) and differential pressure and flow (SITRNS
More informationPressure Controller. Cataloge K Code Characteristics Index. K00-2 Pressure Controller Brief Introduction
K Pressure Controller Cataloge Code Characteristics Index K00-2 Pressure Controller Brief Introduction KC32 Screw Tube Differential Pressure Controller K01 KY10 Bellows Type Differential Pressure Controller
More informationSITRANS P measuring instruments for pressure
Overview Siemens AG 009 Supplementary electronics for 4-wire connection Design Dimensions (W x H x D) in mm (inch) Electrical connection 80 x 10 x 60 (3.15 x 4.7 x.36) Screw terminals (Pg 13.5 cable inlet)
More informationSmart Pressure Transmitter
DOC. NO.: C3500L-E16A Smart Pressure Transmitter with Diaphragm Seal MODEL APT3500L 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200 E-mail: autrol@duon.co.kr,
More informationAll Stainless Steel / SS Case Pressure Gauge
All Stainless Steel / SS Case Pressure Gauge 23L, 23B Series HAWK 23L and 23B series bourdon tube all stainless steel pressure gauges with front flange are designed to fulfill the requirements of high
More informationDifferential pressure gauge For the process industry Models , , high overload safety up to 40, 100 or 400 bar
Pressure Differential pressure gauge For the process industry Models 732.14, 762.14, high overload safety up to 40, 100 or 400 bar WIKA data sheet PM 07.13 for further approvals see page 4 Applications
More informationDiaphragm Seals TYPE12. Tri-Clamp Sanitary Pressure
Tri-Clamp Sanitary Diaphragm Seals TYPE12 Features a flush mount diaphragm and all welded construction, ideal for food & beverage, pharmaceutical and sanitary markets Wetted parts and all welded housing
More informationProduct Catalog. Our Products. DCI Dynamic Instruments Website: dcidynamic.com
1 Product Catalog Our Products We at Dynamic are proud to present out new technical catalogue detailing our extensive range of Pressure Gauges, Thermometers, diaphragm seal, transmitter and accessories.
More informationIn-line diaphragm seal with sterile connection For sanitary applications Model , aseptic connection per DIN 11864
Diaphragm seals In-line diaphragm seal with sterile connection For sanitary applications Model 981.51, aseptic connection per DIN 11864 WIKA data sheet DS 98.51 Applications For direct, quickly removable
More informationDiaphragm. Seal Solutions. Process Industry
Diaphragm Seal Process Industry Diaphragm Seal Systems Provide Protection to Ensure Safety & Reliability Diaphragm seal systems protect gauges from hot, viscous, contaminated or corrosive media. This added
More informationDifferential pressure gauges with Bourdon tube
Differential pressure gauges with Bourdon tube Nominal dia. and with movement of Brass or stainless steel measuring monitoring analysing Description These pressure gauges are suitable for measuring of
More informationUIB3351 Metal Capacitive Pressure/Differential Pressure Transmitters
UIB3351 Metal Capacitive Pressure/Differential Pressure Transmitters 1. Description UIB3351 series intelligent pressure transmitters are suitable for the measurement of flow, level and pressure (differential
More informationDiaphragm seal with sterile connection With clamp connection (Tri-clamp) Models , and
Pressure Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models 990.22, 990.52 and 990.53 WIKA data sheet DS 99.41 for further approvals see page 7 Applications Sanitary applications
More informationDiaphragm seal with sterile connection With union nut (milk thread fitting) Models , , and
Pressure Diaphragm seal with sterile connection With union nut (milk thread fitting) Models 990.18, 990.19, 990.20 and 990.21 WIKA data sheet DS 99.40 for further approvals see page 7 Applications Food
More informationGRUNDFOS PRODUCT GUIDE DMH. Dosing pumps
GRUNDFOS PRODUCT GUIDE Dosing pumps Contents Features and benefits 3 Performance range 4 Pump selection options 36 Pumped liquids List of pumped liquids 39 Identification Type key 7 Functions Functional
More informationProcess connection. Further designs. Order code. to EN
Replacement measuring cell for pressure for SITRANS P, DS III, DS III PA and DS III FF series 7 M F 4 9 9 0-7 7 7 7 0-0 D C 0 0.01... 1 bar g (0.15... 14.5 psi g) B 0.04... 4 bar g (0.6... 58 psi g) C
More informationDiaphragm Seals Experience and a heritage to instill confidence
Diaphragm Seals Experience and a heritage to instill confidence Designed and Manufactured in the United Kingdom To EN837-3 A Diaphragm or 'Chemical Seal' is a mechanical barrier that protects delicate
More informationDIAPHRAGM SEALS Measuring your world since 1965
INSTRUMENTS Measuring your world since 1965 DIAPHRAGM SEALS MADE IN THE USA Measuring your world since 1965 REOTEMP DIAPHRAGM SEALS WHY A DIAPHRAGM SEAL? Diaphragm seals are used in applications where
More informationUIB3351 Metal Capacitive Pressure/Differential Pressure Transmitters
UI3351 Metal Capacitive Pressure/Differential Pressure Transmitters 1. Description UI3351 series intelligent pressure transmitters are suitable for the measurement of flow, level and pressure (differential
More informationDiaphragm seal with threaded connection Plastic version Model
Pressure Diaphragm seal with threaded connection Plastic version Model 99.31 WIKA data sheet DS 99. for further approvals see page 5 Applications For aggressive, corrosive or environmentally hazardous
More informationDiaphragm seal with flange connection For the pulp and paper industry Model
Pressure Diaphragm seal with flange connection For the pulp and paper industry Model 990.23 WIKA data sheet DS 99.34 for further approvals see page 6 Applications Highly viscous, hardening or particle-laden
More informationProduct presentation SITRANS P310
Product presentation SITRANS P310 Unrestricted / Siemens 2016. All Rights Reserved. usa.siemens.com/pressure SITRANS P family Page 2 SITRANS P pressure transmitter Single range transmitters for general
More informationModel S26 seals for remote and direct mount
Data Sheet DS/S26-EN Rev. I Model S26 seals for remote and direct mount Engineered solutions for all applications Measurement made easy All welded constructions combine an economically feasible and technically
More informationMAN-P. Diaphragm Pressure Gauges. according to EN for Stringent Demands
Diaphragm Pressure Gauges according to EN 837-3 for Stringent Demands measuring monitoring analysing MAN-P Housing: mm, 160 mm Connection: G ½, open measuring flange DIN/ANSI Material: stainless steel
More informationPressure Transmitters
S E L E C T I O N G U I D E Pressure Transmitters Pressure Transducers ASAHI GAUGE MFG. CO.,LTD. JAPAN Small-size pressure-resistant & explosion-proof pressure Pressure-resistant & explosion-proof differential
More informationTechnical Datasheet. Differential Pressure Gauge Diaphragm DG Range. Performance characteristics. Product applications. How can we help you?
Technical Datasheet Differential Pressure Gauge Diaphragm DG Range Nominal Diameter options of 100mm & 150mm. Degree of Protection IP55/IP65. Stainless steel enclosure as standard. Blowout Protection.
More informationSmart Pressure Transmitter
DOC. NO.: C3200L-E16B Smart Pressure Transmitter with Diaphragm Seal MODEL APT3200L DUON System Co., Ltd. 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200
More informationPressure transmitter COMPACT ECOnomic
Pressure transmitter COMPACT ECOnomic for food/pharmaceutical/biotechnology, Type series CA1110 Features Digitale pressure transmitter Hygienic design according to EHEDG Case and wetted parts of stainless
More informationGT All SS Industrial Dial Thermometer Gas Filled system
TM ll SS Industrial Dial Thermometer Gas Filled system Special Features approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil
More informationModel S26 seals for remote and direct mount. 2600T Series Pressure Transmitters Engineered solutions for all applications
Data Sheet DS/S26-EN Model S26 seals for remote and direct mount 2600T Series Pressure Transmitters Engineered solutions for all applications All welded constructions combine an economically feasible and
More informationDMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
More informationSmart Pressure Transmitter
DOC. NO.: C3100L-E16B Smart Pressure Transmitter with Diaphragm Seal MODEL APT3100L DUON System Co., Ltd. 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200
More informationMetal tube flowmeters. Series SC250. Metal Tube Flow Meters. Series SC250. Variable area flowmeter for liquids, gases and steam
Metal tube flowmeters Variable area flowmeter for liquids, gases and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h,
More informationT EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
More informationPressure gauge per EN with mounted diaphragm seal With threaded connection, threaded design Model DSS10M
Pressure Pressure gauge per EN 837-1 with mounted diaphragm seal With threaded connection, threaded design Model DSS10M WIKA data sheet DS 95.01 Applications For aggressive, hot, corrosive, environmentally
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More information1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler Material Maximum working pressure Test pressure Minimum Burs Pressure uminium 16 bar / 232 psi 24 bar / 348 psi 80 bar / 1160
More informationDIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
More informationSpecial Purpose Transmitters
Special Purpose Transmitters Type UT-10/UT-11 UNITRANS Universal Pressure Transmitter User Adjustable Turndown of up to 1:20 Large, Easy-to-Read LCD includes Bar Graph and Trend Display The UniTrans pressure
More informationIGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
More informationMINI-NBK ECONOMICAL LEVEL INDICATOR
MINI-NBK ECONOMICAL LEVEL INDICATOR Flow Pressure Level Temperature measurement monitoring control N2 316 Stainless Steel Tube Maximum Pressure: 580 PSIG Maximum Temperature: Measuring Lengths to 9.8 Ft.
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationDiaphragm seal with sterile connection For sanitary applications Models , , and , threaded connection
Diaphragm seals Diaphragm seal with sterile connection For sanitary applications Models 990.18, 990.19, 990.20 and 990.21, threaded connection WIKA data sheet DS 99.40 for further approvals see page 3
More informationClass 1 as per EN o C to 65o C 15 kg/cm2 ( without thermowell ) 120 % of Full Scale 8 mm ½ BSP (M) Adjustable
Special Features & tex approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil filled (optional) Standard followed EN 90. pplication
More informationMetal tube variable area flowmeter for gases, liquids and steam
Metal tube variable area flowmeter for gases, liquids and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h, kg/h, t/h,
More informationSITRANS F M flow sensors 711/A and 711/911E
s flow sensors 711/A and 711/911E flow sensors 711/A and 711/911E Introduction Application Mode of operation, operation Mode of operation All electromagnetic flow measurements are based on Faraday s Law
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationElectromagnetic Flow Meter Owner s Manual HARDWARE
Electromagnetic Flow Meter Owner s Manual HARDWARE Compact Magnetic Flowmeter (Flange Connection) Sanitary Magnetic Flowmeter (Tri clamp Connection) Part No. 910000 Rev.C Content 1. GENERAL INFORMATION...2
More informationSelf-operated Pressure Regulators Type Universal Pressure Reducing Valve
Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN
More informationDiaphragm seal with sterile connection For homogeniser machines Model
Pressure Diaphragm seal with sterile connection For homogeniser machines Model 990.30 WIKA data sheet DS 99.33 for further approvals see page 6 Applications Homogeniser machines for milk, beverages, cosmetics
More information* * Data sheet DA A (ATEX) Differential pressure measuring device for potentially explosive areas
09015062 DB_EN_DA10_ATEX Rev. ST4-A 03/18 *09015062* Data sheet DA10... 0A (ATEX) Differential pressure measuring device for potentially explosive areas Gas explosion protection Zone 1 and 2, gases and
More informationDMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up
More informationSanitary Seals. Dimensional Drawing for VCS Sanitary In-Line Diaphragm Seal Process wetted surface finish max. Ra of 32 µ in. 1.
Sanitary Seals TRI-LMP IN-LINE (VS) SEL Dimensional Drawing for VS Sanitary In-Line Diaphragm Seal Process wetted surface finish max. Ra of 32 µ in. 1.5 (38,1) O dod L 3.54 (90,0) Dimensions are in inches
More informationPCC Technova. Series "CPL" Cylindrical Valves. Full & Regular Port 1/2" - 6" A PCC Flow Technologies Company
PCC Technova A PCC Flow Technologies Company Series "CPL" Cylindrical Valves Full & Regular Port 1/2" - 6" FEATURES ISO mounting flange dynamic stem seals elastomer backing stem bearing cavity free design
More informationAbout Gaugetech Warranty Trademarks Disclaimer
Product Catalog About Gaugetech Gaugetech is a leading manufacturer/distributor of pressure gauges, temperature instruments and related products serving the petrochemical, pulp and paper, hydraulic industries,
More informationLC OVAL GEAR FLOWMETER
LC OVAL GEAR FLOWMETER DN10-DN25 DN50-DN100 Digital Register DN65 High Temp. DN150,DN200 DN50-DN100 General Description Oval gear flowmeters are instruments used for the continuous and intermittent measurement
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationData Sheet * * Differential pressure - Measuring device Pressure levels PN40/PN100. Important features. Application scopes
*09005393* DB_EN_DA03_GK_HL Rev.B 09/13 *09005393* d e v e l o p i n g s o l u t i o n s DA03 Data Sheet Differential pressure - Measuring device Pressure levels PN40/PN100 The differential pressure -
More informationINDUSTRIAL THERMOMETER
INDUSTRIAL THERMOMETER The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement the genuine
More informationPressure transducer DMU 01K Compact version
Pressure transducer DMU 01K Compact version Dimensions (in mm) Wiring diagram 8 Application Special OEM unit. For electronic pressure measurement in industrial or HVAC applications (such as hydraulic,
More informationISTEC MAGNETIC METERS
ISTEC MAGNETIC METERS MEASURE ANY CONDUCTIVE LIQUIDS OR SLURRIES (EVEN ABRASIVE OR CORROSIVE) WITH THE NEW MICROPROCESSOR-BASED MAGNETIC METER -- A QUALITY PRODUCT - SIMPLE - RELIABLE - AT AN AFFORDABLE
More informationAccessories for diaphragm seals Block flange and saddle flange Models , ,
Accessories Accessories for diaphragm seals Block flange and saddle flange Models 910.19, 910.20, 910.23 WIKA data sheet AC 91.01 Applications For welding into the product line or heating line for establishing
More informationINDUSTRIAL THERMOMETER
INDUSTRIAL THERMOMETER The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement the genuine
More informationChemical Motor Pump Unit BN
MB / General Pump BN-type motor pump units are normal-priming, singlestage, plastic centrifugal pumps in block design with horizontal axis. Their dimensions and flow rates mainly correspond to DIN/EN.
More informationVisual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Material Pipe Operating Operating Page
Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Pipe Operating Operating Page O.D. x s Pressure Temperature Plastic thread 10 25670 PVDF 63.0 x 3.6 2.5-10 thread max. 140 C 61 Plastic
More informationButterfly valve Series K
P R O C E S S T E C H N I K G M B H Centrally mounted butterfly valve PTFE lined Type KG 6 KG 8 K 16 K 18 two-piece body GEFA-MULTITOP Automation system Exchangeable flange for direct installation Unsurpassed
More informationRHM 03 a1 - (low stress in welds and increased wall thickness against abrasion) RHM bar APPLICATIONS. Batching Dosing. Injections Filling
RHM 03 a1 - RHM 03 0.05 ~ 5 kg/min (11 lb/min), -200 ~ 400 C, APPLICATIONS Batching Dosing Injections Filling FEATURES 868 bar 0.005 kg/min ~ 5 kg/min (11 lb/min) 0.1% 0.05% process connection. ADVANTAGES
More informationCOVOL. Operating Data. Areas of Application. Measuring Ranges. Method of Operation. Fields of operation. Features. Installation information
Durchflussmessung Flowmeters COVOL Areas of Application Operating Data Method of Operation Oscillating Piston Operating pressure, max. PN 10 (Plastic) PN 16 (Stainless Steel) Fields of operation Consumption
More informationp Additional dimensions see section dimensions.
Hydrostatic pressure sensor Dimensions LHC-M20 with process connection G51 74 LHC-M40 with process connection F76 74 232.5 60 261 G1½ 28 20 Ø22 p Additional dimensions see section dimensions. Function
More informationSpecial Containers Various applications such as collecting, mixing, storing or separating liquids or gases Page 867
10 Special Containers Various applications such as collecting, mixing, storing or separating liquids or gases Page 867 Barrel Pump For a safe tightening of wine barrels during the fermentation process
More informationType 437. Type 437. Available designs. Cap H2 Adjusting screw with bushing. Axial needle 69 beering. Lock nut. Spring plate. Spring plate. Pin.
Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring 2 Outlet body 17 Spring plate 57 Pin 61 Ball 7 Disc 1 Body Threaded
More informationDisc Blow Out Protection. Heavy Duty Bourdon Tube/Rotary Geared Movement. Socket welded to Case. Open Front/ Removable Ring. Field Liquid Fillable
Since 97 Specifications: Heavy Duty Bourdon Tube/Rotary Geared Movement Socket welded to Case Field Liquid Fillable Zero Adjustable Pointer HAWK 7L and 7B series bourdon tube all stainless steel pressure
More informationDensity Solution. TDF Series. Direct Insertion Density Meter. Characteristics
Density Solution TDF Series Direct Insertion Density Meter Xi an Tosilon Automation Co., Ltd No.299, Daqing Rd, Lianhu District, Xi'an Shaanxi, China Tel: +86-29-8823 8550 info@tosilon.com; www.tosilon.com
More informationOPTISWITCH 4000/5000. Vibration level switches for liquids
OPTISWITCH 4000/5000 Technical Datasheet Vibration level switches for liquids Operates up to 250 C / 480 F and 64 bar / 925 psi Pump dry-run detection High reliability due to permanent fault monitoring
More informationHigh Quality Pressure Gauges
High Quality Pressure Gauges Armaturenbau is a company established in 1903 with the concept of manufacturing pressure gauges of the most durable, rugged and reliable type, working with the latest machinery
More informationSelf-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points from 0 to 250 C G ½ to G or DN 5 to DN
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationFor industrial applications For marine applications With proximity switch. Piston type flow switches
JJ For industrial applications JJ For marine applications JJ With proximity switch Piston type flow switches DB_Piston_type_flow_switches 01/2016 199 Piston type flow switches Piston type flow switches
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation Guided-wave
More informationHigh-quality pressure sensor with mounted diaphragm seal With flange connection, flush diaphragm Model DSS27T
Pressure High-quality pressure sensor with mounted diaphragm seal With flange connection, flush diaphragm Model DSS27T WIKA data sheet DS 95.13 Applications For aggressive, highly viscous, crystallising
More informationCoriolis Mass Flowmeter for low flow measurements
RHM 03 - Flexible Coriolis Mass Flowmeter for low flow measurements The RHM 03 can measure flow rates up to 5 kg/min (11 lb/min) with temperatures in excess of 400 C and pressures to 868 bar. This model
More informationSITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
More information* * Data sheet MA15F... A/B/C/D. Diaphragm manometer for explosive areas
09005886 DB_EN_MA15_ATEX Rev. ST4-D 03/18 *09005886* Data sheet MA15F... A/B/C/D Diaphragm manometer for explosive areas Gas explosion protection zone 1 and 2, gases and vapours Dust explosion protection
More informationMark 908 Series. Pressure Regulators Mark 908X Piloted Blanketing Regulators
Pressure Regulators Mark 908X Piloted Blanketing Regulators Mark 908 Series 3/4" - 1" (DN20 - DN25) Low Pressure Blanketing (Gas overlay) PRV for medium to large Stainless and SUD vessels The Mark 908
More informationLBTC Series Positive Displacement Rotary Vane Flow Meters
LBTC Series Positive Displacement Rotary Vane Flow Meters Summary LBTC Series positive displacement rotary vane flow meters are independently designed and manufactured by our company on the base of absorbing
More informationModel RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
More informationDiaphragm monitoring system with clamp connection For sanitary applications Model DMS-FP
Pressure Diaphragm monitoring system with clamp connection For sanitary applications Model DMS-FP WIKA data sheet DS 95.20 Applications Hygienic pressure measurement for the pharmaceutical industry and
More informationDM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
More informationThermowell for temperature sensors omnigrad M TW 13
Technical information TI 264T/02/en 60019743 Thermowell for temperature sensors omnigrad M TW 13 Pipe thermowell Flanged process connection Omnigrad M TW 13 thermowells are designed for the use in the
More informationFLEXWOUND METALLIC AND SEMI METALLIC GASKETS
FLEXWOUND METALLIC AND SEMI METALLIC GASKETS PRODUCT DESCRIPTION FMI metallic gaskets are specifically designed to withstand extreme temperatures and pressures, combined with chemical exposure. Available
More informationPressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated
Pressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated 1 Burling Valves Largest Cv per valve size - Possible smaller, more cost effective valve selections
More informationUNITED ELECTRIC 100 Series, Pressure, Vacuum, Diff. Pressure & Temp. Switches Adjustable Ranges 30 Vac to 5000 PSI, -180 to 650 o F
UNITED ELECTRIC 100 Series, Pressure, Vacuum, Diff. Pressure & Temp. Switches Adjustable Ranges 30 Vac to 5000 PSI, -180 to 650 o F DESCRIPTION The 100 Series is a cost-effective pressure and temperature
More information