INT 4/15 Catalogue 2015/2016 We reserve the right to effect changes. System press tools. Piping technology

Transcription

1 INT 4/5 Catalogue 205/206 We reserve the right to effect changes. Piping technology P

2 For all Viega press systems from d Viega system press tools can be used with all metallic Viega press systems as well as for Geopress and P E-Xc press systems. ressgun 5 P and the tried and tested Pressgun Picco are equipped with the latest lithium ion technology, the highest battery capacity combined with optimal cold resistance. A power pack is also available. The system press tools P ressgun 5 and Pressgun Picco are equipped with an innovative safety technology and have an LED display. The rotatable press head on the P ressgun 5 and the Pressgun P icco as well as the low weight allow easy handling. The innovative Viega press rings with hinged adapter jaw allow pressings in hard-to-access spaces as well as in shafts and pre-wall constructions. The geometry and press contour of the system press jaws is optimally harmonised with the press connectors. Service points for system press tools and press jaws authorised by Viega offer a high level of system reliability. Maintenance tips for Viega system press tools and press jaws. Viega press tools achieve a pre-set pressure electro-hydraulically for the pressing procedure. The required operational safety requires a leak-free hydraulic system without oil loss, however natural wear and tear on such heavily used components is unavoidable. To ensure the continuous operating safety and reliability of the system press tools, the tools must be maintained regularly. This normally takes place by sending to the service points named by Viega or on location promotions through service points at the trade wholesaler. System press jaws It is recommended that the press jaw are inspected together with the system press tools. During the procedure, consumables are replaced, press jaw contours are revised and the press jaws are reset. Since 202, Viega press jaws have been provided with maintenance stickers, which show the next recommended inspection date..q 2.Q 3.Q 4.Q Example: next service 3rd quarter of 205. New stickers after successful servicing by a Viega service point. Viega system press tools/servicing intervals: Pressgun 5 (for DN0 DN00) LED display after 40,000 pressings. Safety shutdown after a further 2,000 pressings - at the latest after 4 years. Pressgun Picco (for DN0 DN40) Pressgun 4E and 4B (for DN0 DN00) LED display after 30,000 pressings. Safety shutdown after a further 2,000 pressings - at the latest after 4 years. Type PT3-AH (for DN0 DN00) Picco (for DN0 DN40) Type PT3-H/EH (for DN0 DN00) LED display after 20,000 pressings. Safety shutdown after a further 2,000 pressings - at the latest after 4 years. Type 2 (for DN0 DN00) At least every 2 years. Viega battery-operated press tool m odel 2478 (for d 2 22 and d 4 20) At least once a year. Viega battery-operated press tool m odel 2475 (for DN0 DN00) LED display after 20,000 pressings. However, after no more than 4 years. Service points authorised by Viega: Martin Unterreitmaier Landsberger Str. 469, 824 Munich Telephone: , Telefax: , martin@unterreitmaier-gmbh.de, www. unterreitmaier-gmbh. de Hans-Joachim Voigt & Sohn Nordlichtstraße 48/50, 3405 Berlin Telephone: , Telefax: , info@voigt-und-sohn.de, www. voigt-und-sohn. de Hamburger-Hochdruck-Hydraulik GmbH Billwerder Billdeich 60 C, 2033 Hamburg Telephone: , Telefax: , info@hhhydraulik.com, www. hhhydraulik. com Note Please fulfil your duty of care and follow these maintenance notices. General rule: Safety through maintenance. If the advice is not followed, no responsibility for personal injury can be accepted.

3 P Index 258 System press jaws for metallic press connector systems 259 System press jaws for plastic press connector systems 265 Push-in connection tools 268 Tools 268 Cases, case inlays 269 Spare parts 272 P EAN-Code The EAN-Code composed out of the constant manufacturer number 4052 and a six-digit code - in this example The exchange of the last six digits against the code shows the EAN-Code. 257

4 Pressgun 5 Press tool with battery -- equipped with press jaw PT2 new generation , 46 9, latest lithium ions battery technology ( 8 V/2,0 Ah), battery charger 2 30 V/ 8 V, patented safety mechanism, automatic maintenance display, LED lamp for lighting of press position, case Model /22/ = for press connectors of the metallic press systems Pressgun 5 Press tool with power pack -- equipped with press jaw PT2 new generation , 46 9, power pack 2 30 V/50 Hz, patented safety mechanism, automatic maintenance display, LED lamp for lighting of press position, case Note Mains operation is possible with the new power pack which is included in delivery! Model /22/ = for press connectors of the metallic press systems Pressgun 5 Press tool with battery -- without: press jaw latest lithium ions battery technology ( 8 V/2,0 Ah), battery charger 2 30 V/ 8 V, patented safety mechanism, automatic maintenance display, LED lamp for lighting of press position, case Model Pressgun 5 Press tool with power pack -- without: press jaw power pack 230 V/50 Hz, patented safety mechanism, automatic maintenance display, LED lamp for lighting of press position, case Note Mains operation is possible with the new power pack which is included in delivery! Model Pressgun Picco Press tool with battery -- equipped with press jaw Picco 485 5, , lithium ion rechargeable battery technology, rechargeable battery 8 V/2.0 Ah, battery charger 230 V/ 8 V, patented safety mechanism, automatic maintenance display, LED lamp for lighting of press position, case with space saver for power pack Model /22/28 = for press connectors of the metallic press systems

5 P Pressgun Picco Press tool with battery -- without: press jaw lithium ion rechargeable battery technology, rechargeable battery 8 V/2.0 Ah, battery charger 230 V/ 8 V, patented safety mechanism, automatic maintenance display, LED lamp for lighting of press position, case with space saver for power pack Model System press jaws for metallic press connector systems Press jaw set CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for press tool type -- equipped with case model , press jaw PT2 new generation 46 88, , , 46 9, , Model QS = for press connectors of the metallic press systems QS = Quantity per set Press jaw set CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for press tool type -- equipped with case model , press jaw PT2 new generation , , 46 9, Model QS = for press connectors of the metallic press systems QS = Quantity per set Press jaw set CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for press tool type -- equipped with case model , press jaw PT2 new generation , Model QS 42/ = for press connectors of the metallic press systems QS = Quantity per set 259 P

6 Press jaw PT2 new generation ressgun 4E, 4B and 5, PWH 75, type N 230 V and type N battery, Geberit/Mapress press tools type E FP I I, A CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for press tool type Model = for press connectors of the metallic press systems Press jaw Picco -- recommended for battery-powered press tools Picco Pressgun and Ridgid RP 20 Model = f or press connectors of the metallic press systems 260 Press jaw Picco with snap action -- recommended for battery-powered press tools Picco Pressgun and Ridgid RP 20 Note One-hand mounting due to independent closing of the press jaw during the pressing! Model = f or press connectors of the metallic press systems Megapress Press jaw PT2 new generation -- only for Megapress ressgun 4E, 4B and 5, PWH 75, type N 230 V and type N battery, Geberit/Mapress press tools type E FP I I, A CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for Sanpress, Sanpress Inox, Sanpress Inox G, Prestabo, Profipress, Profipress G, Profipress S, Profipress CR, press tool type Model for D ½ ¾

7 P Megapress Press jaw Picco -- only for Megapress -- recommended for battery-powered press tools Picco Pressgun and Ridgid RP 2 0 Model for D ½ ¾ Press ring set -- recommended for battery-powered press tools Picco Pressgun and Ridgid RP equipped with case m odel , hinged adapter jaw P model 2496., press ring , , , , , case with space saver for hinged adapter jaw Z Model HAJ P/Z HAJ = for hinged adapter jaw = for press connectors of the metallic press systems Press ring set CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for press tool type -- equipped with case model , hinged adapter jaw , press ring , , , , , case with space saver for hinged adapter jaw P Model HAJ P/Z HAJ = for hinged adapter jaw = for press connectors of the metallic press systems Press ring set CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for press tool type -- equipped with press ring , , hinged adapter jaw case Model HAJ HAJ = for hinged adapter jaw = for press connectors of the metallic press systems 26 P

8 Hinged adapter jaw ressgun 4E, 4B and 5, PWH 75, type N 230 V and type N battery, Geberit/Mapress press tools type E FP I I, A CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for Sanpress XL (gunmetal), press tool type Note Work in the ground should be carried out using the battery-powered press tool P ressgun 4B or 5! Model type GC GKC RA MD Z , ½ ¾ ¼ GC = f or Geopress connectors GKC = for Geopress K connectors = for press connectors of the metallic press systems RA = for Raxofix MD = for Megapress Hinged adapter jaw P -- recommended for battery-powered press tools Picco Pressgun and Ridgid RP 2 0 Model RA MD ½ ¾ = for press connectors of the metallic press systems RA = for Raxofix MD = for Megapress Press ring set -- for Sanpress Inox XL, Sanpress Inox G XL, Prestabo XL, Profipress XL (copper) ressgun 4E, 4B and 5, PWH 75, type N 230 V and type N battery, Geberit/Mapress press tools type E FP I I, A CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for Sanpress XL (gunmetal), press tool type -- equipped with case model XL, hinged adapter jaw , press ring , , Model XL for d Press ring HAJ for d -- for Sanpress Inox XL, 64.0 Sanpress Inox G XL, Prestabo XL, 66.7 Profipress XL (copper) not suitable for Sanpress XL 88.9 (gunmetal) 08.0 Model XL HAJ = f or hinged adapter jaw ) also for Profipress G XL

9 Press ring Model HAJ for d P/Z P/Z P/Z P/Z P/Z P/Z P HAJ = f or hinged adapter jaw Press jaw inset -- for REC-SAN battery-powered press tool ( model 2478), combi press jaw -- galvanised steel, chromated and coloured Model * * 30 09* = f or press connectors of the metallic press systems * = Discontinued, limited availability. Adapter jaw set CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for Profipress XL, Profipress G XL (copper), Sanpress Inox XL, Sanpress Inox G XL (stainless steell), Prestabo X L, press tool type -- equipped with adapter jaw model 2297.XL, case m odel XL, press chain model XL Model XL SXLG 76, 08, SXLG = f or Sanpress XL press connectors (gunmetal) P Press chain -- for Sanpress XL -- not suitable for Profipress XL, Profipress G XL (copper), Sanpress Inox XL, Sanpress Inox G XL (stainless steell), Prestabo XL -- only use with adapter jaw model 2297.XL Model XL SXLG SXLG = f or Sanpress XL press connectors (gunmetal) Adapter jaw CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for Profipress XL, Profipress G XL (copper), Sanpress Inox XL, Sanpress Inox G XL (stainless steell), Prestabo X L, press tool type -- suitable for press chain m odel XL Model 2297.XL SXLG 76, 08, SXLG = f or Sanpress XL press connectors (gunmetal) 263

10 Megapress Press set -- only for Megapress ressgun 4E, 4B and 5, PWH 75, type N 230 V and type N battery, Geberit/Mapress press tools type E FP I I, A CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for Sanpress, Sanpress XL (gunmetal), Sanpress Inox, Sanpress Inox XL, Sanpress Inox G, Sanpress Inox G XL (stainless steell), Prestabo, Prestabo XL, Profipress, Profipress XL, Profipress G, Profipress G XL (copper), Profipress S, Profipress CR, press tool type -- equipped with Megapress p ress jaw PT2 new generation m odel , hinged adapter jaw , Megapress p ress ring , , case Model for D ½ Megapress Press ring -- only for Megapress -- not suitable for Sanpress, Sanpress XL (gunmetal), Sanpress Inox, Sanpress Inox XL, Sanpress Inox G, Sanpress Inox G XL (stainless steell), Prestabo, Prestabo XL, Profipress, Profipress XL, Profipress G, Profipress G XL (copper), Profipress CR Model HAJ for D P/Z P/Z ½ ¾ ¼ ½ HAJ = for hinged adapter jaw 264 Megapress Press set Picco -- only for Megapress -- recommended for battery-powered press tools Picco Pressgun and Ridgid RP not suitable for Sanpress, Sanpress XL (gunmetal), Sanpress Inox, Sanpress Inox XL, Sanpress Inox G, Sanpress Inox G XL (stainless steell), Prestabo, Prestabo XL, Profipress, Profipress XL, Profipress G, Profipress G XL (copper), Profipress S, Profipress CR -- equipped with hinged adapter jaw P model 2496., Megapress press jaw Picco m odel , Megapress press ring , case with space saver for press ring D⅜, press jaw D⅜ and hinged adapter jaw Z Model for D ½ ¾

11 P System press jaws for plastic press connector systems Press jaw set CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for press tool type -- equipped with case model , press jaw , , , Model SF F QS SF = for Sanfix Fosta F = for Fonterra QS = Quantity per set Press jaw set CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for press tool type -- equipped with press jaw , case Model SF F QS 6/20 6/ SF = for Sanfix Fosta F = for Fonterra QS = Quantity per set P Press jaw set CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for press tool type -- equipped with case model , press jaw , Model SF QS 50/ SF = for Sanfix Fosta QS = Quantity per set 265

12 Press jaw ressgun 4E, 4B and 5, PWH 75, type N 230 V and type N battery, Geberit/Mapress press tools type E FP I I, A CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B Model SF F 6/ /5 6/ SF = for Sanfix Fosta F = for Fonterra ) Also recommended for press tool type! Press jaw ressgun 4E, 4B and 5, PWH 75, type N 230 V and type N battery, Geberit/Mapress press tools type E FP I I, A CO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B Model for d F Sl PX F = for Fonterra Sl = for Smartloop PX = for Pexfit Pro Pexfit Pro Press jaw -- for Picco battery-powered press tool, press connectors of the PE-Xc system Model for d Press jaw -- recommended for battery-powered press tools Picco Pressgun and Ridgid RP 2 0 Model SF F Sl PX 4/5 6/ /5 6/ SF = for Sanfix Fosta F = for Fonterra Sl = for Smartloop PX = for Pexfit Pro

13 P Geopress P ress ring set ressgun 4E, 4B and 5, PWH 75, type N 230 V and type N battery, Geberit/Mapress press tools type EFP I I, ACO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for press tool type -- equipped with Geopress case m odel , Geopress press ring , , hinged adapter jaw galvanised steel/phosphatised steel -- galvanised steel press rings, phosphatised steel hinged adapter jaw Note Work in the ground should be carried out using the battery-powered press tool P ressgun 4B or 5! Model GC GC = f or Geopress connectors Geopress P ress ring set ressgun 4E, 4B and 5, PWH 75, type N 230 V and type N battery, Geberit/Mapress press tools type EFP I I, ACO, ECO, ACO 20, ECO 20, AFP 20, EFP 20, ACO 202 and ECO 202, Ridgid press tools RP 0-S, RP 0-B, RP 330C/330B, RP 340C and RP 340B -- not suitable for press tool type -- equipped with Geopress case m odel , Geopress press ring , , , , hinged adapter jaw galvanised steel press rings, phosphatised steel hinged adapter jaw Note Work in the ground should be carried out using the battery-powered press tool P ressgun 4B or 5! Model GC GC = f or Geopress connectors Geopress P ress ring -- suitable for hinged adapter jaw model galvanised steel Model HAJ GC Z Z P HAJ = f or hinged adapter jaw GC = f or Geopress connectors Press jaw inset -- for REC-SAN battery-powered press tool ( model 2478), combi press jaw -- galvanised steel, chromated and coloured Model SSF * * * SSF = for Sanfix/ Sanfix Fosta * = Discontinued, limited availability. 267

14 Push-in connection tools Tool set push-in connection -- for steel tubes in accordance with EN 0220/0255, building of threaded connections in pipelines -- equipped with drilling bit 73 5 holding device, drilling shaft, push-in tool, drilling bit, case, space saver for M egapress push-in connection Model Drilling bit -- spare part for tool set push-in connection model steel Model 4278 Center drill -- spare part for tool set push-in connection model steel Model 4279 Adapter hexagonal drive -- for using with drill chuck without SDS-plus adapter -- suitable for tool set p ush-in connection model steel hexagon for drill chuck Ø 3 mm Model 4280 Ø 27 Ø 6 for d Tools Pipe cutter -- for copper pipe, stainless steel pipe, Prestabo pipe -- steel Model 2290 Cutting wheel -- suitable for pipe cutter model steel Model for d PRi PRi = t o the pipe cutter (Ridgid) (grey) Cutting wheel -- steel bolts, safety ring Model PRi PRe PRi = t o the pipe cutter (Ridgid) (grey) PRe = t o the pipe cutter (Rems) (yellow)

15 Deburrer -- for deburr internally and externally, copper pipe, stainless steel pipe, Prestabo pipe -- steel Model Deburrer -- for deburr internally and externally, copper pipe, stainless steel pipe, Prestabo pipe -- steel Model XL Marking pen -- for Viega press connector systems Model for d 2 54 for d P Cases, case inlays Case -- for press tools type, type 2 and PT3-EH -- without: press tool, press jaw Model Case -- for press tools Pressgun 4E and 4B -- without: press tool, press jaw Model P Case -- for press tool Pressgun 5 with battery, press tool Pressgun 5 with power pack -- without: press tool, press jaw Model Case -- for Picco Pressgun battery-powered press tool -- without: press tool, press jaw Model

16 Raxofix Case -- suitable for Raxofix press jaw model , Raxofix press jaw , , , , without: press jaw space saver for d6 40 Model Raxofix Case -- without: press jaw space saver for d50, d63 Model Case -- suitable for hinged adapter jaw , press ring , , , without: press ring, hinged adapter jaw space saver for d Model XL Case -- suitable for adapter jaw model 2297.XL, press chain model XL -- without: press chain, adapter jaw space saver for d Model XL Case -- suitable for hinged adapter jaw P model 2496., hinged adapter jaw , press ring , , , , , without: press rings, hinged adapter jaw space save for d2 35 Model Case -- suitable for press jaw set model , , without: press jaw space saver for metal press connector systems d2 35 or for plastic press connector systems d6 32 Model

17 Case -- suitable for press jaw , , press jaw PT2 new generation , without: press jaw space saver for metallic press connector systems d42, d54 or for plastic press connector systems d50, d63 Model Megapress Case -- suitable for Megapress p ress jaw PT2 new generation model , hinged adapter jaw , Megapress p ress ring , , without: hinged adapter jaw, press rings, press jaw space saver for D½ 2 Model P Case inlay -- for Viega press jaw including Raxofix press jaw, press tools type, type 2 and PT3-EH -- without: press tool, press jaw Model Case inlay -- for Viega press jaw including Raxofix press jaw, PT3-AH battery-powered press tool -- without: press tool, press jaw Model Case inlay -- for Picco battery-powered press tool with Makita battery, Viega press jaw including Raxofix press jaw -- without: press tool, press jaw Model Case inlay -- for Viega press jaw including Raxofix press jaw, press tools Pressgun 4E and 4B -- without: press tool, press jaw Model Case inlay -- for Picco Pressgun battery-powered press tool with Lithium-Ion battery, Viega press jaw including Raxofix press jaw -- without: press tool, press jaw Model P

18 Spare parts Maintenance oil -- for press tool, press jaw, press ring, press chain, hinged adapter jaw, adapter jaw Model 2499 Rechargeable battery Makita -- for PT3-AH and Picco batterypowered press tools Model Battery charger Makita -- for PT3-AH and Picco batterypowered press tools Model Rechargeable battery lithium ions latest battery generation, higher capacity -- for Pressgun 4B, Pressgun 5 and Pressgun Picco battery-powered press tools -- suitable for battery charger model 2487, Model contents [ml] 25 V [V] C [A h] V = Voltage (V) C = capacity (Ah) V [V] 230/ V = Voltage (V) V [V] C [A h] V = Voltage (V) C = capacity (Ah) Battery charger V [V] -- for Pressgun 4B, Pressgun 5 and 230/8 Pressgun Picco battery-powered press tools V = Voltage (V) -- suitable for rechargeable battery lithium ions m odel , , Model Connection cable UK power plug BS 363 A / C7 -- suitable for battery charger model Model V [V] V = Voltage (V) Power pack -- for Pressgun 4B, Pressgun 5 and Pressgun Picco battery-powered press tools Model V [V] 230 V = Voltage (V)