PRESS TOOLS PRODUCT CATALOG

Transcription

1 PRESS TOOLS PRODUCT

2 PRESS WITH CONFIDENCE. PRESS WITH THE BEST. RIDGID press tools save you time and money by delivering reliable performance press after press. Every generation of press tools works harder and smarter than the last. Our commitment to reducing in-use tool weight while increasing performance keeps you at the top of your game. It s exactly what you should expect from the #1 press tool manufacturer. RIDGID: Built For Those Who Know. RP 340 WATERTIGHT PRESS CONNECTIONS IN 7 SECONDS OR LESS. NO OPEN FLAMES. NO BURN PERMITS. NO ONSITE FIRE WATCH. RP 240 RP 241 LOWER TOTAL INSTALLATION COST. REDUCES VITAL EQUIPMENT SHUTDOWNS. PEX-ONE Press Booster FOR MORE PRODUCT INFORMATION VISIT RIDGID.COM/PRESSING 1

3 2

4 STANDARD SERIES PRESS TOOL ½" to 4" Capacity RP 340 PRESS TOOL The industry-leading RP 340 press tool has a 4" pipe and tubing capacity and weighs only 6 pounds. It features a 180 rotating swivel barrel, perfect for getting at hard-to-reach connections. An available 18V Advanced Lithium 4 battery helps the RP 340 achieve as much as 400 presses per charge, and it has an industry-leading service interval of 42,000 cycles. An optional AC power adapter can further maximize uptime job site to job site. SPECIFICATIONS Capacity: 1 2" to 4". 180 Barrel/Jaw Swivel. Battery: 18V Advanced Lithium 2. Battery Charger: 120V. Hydraulic Ram Output: 7,200 lbs. (32kN). Weight: Tool Only 7.3 lbs. Tool with Battery 8.3 lbs. Tool with Battery and ½ Jaws 12.3 lbs. Operating Temperature Range: 15 F to 122 F. Approximate Cycle Time: 4-5 Seconds. Standard Kit Includes: RP 340 Press Tool, 120V Charger, (2) 18V Advanced Lithium 2 Batteries, and Carrying Case. Optional AC Power Adapter. Compatible with all RIDGID Standard Series Press Jaws and Attachments. For Pressing Copper, Stainless Steel, Black Steel and PEX, and Cutting Soil Pipe. Service Interval: 42,000 Cycles. Standard Jaws for Viega ProPress Copper and Stainless ½" - 2" Rings for ProPress XL-C Copper and Stainless 2½" - 4" Jaws and Rings for Viega MegaPress Black Steel Pipe ½" - 2" RIDGID Press Booster for Viega MegaPress XL Black Steel Pipe 2½" - 4" Standard Jaws for Viega PureFlow PEX ½" - 2" Pressing Rings for ProPress Copper and Stainless ½" - 2" Press Snap Soil Pipe Cutter Cast Iron Soil Pipe 1 ½" - 4" 3

5 STANDARD SERIES PRESS TOOL ½" to 4" Capacity RP 340 Battery Tool with Jaw Sets for Viega ProPress (Copper and Stainless) MODEL RP 340 RP 340 Battery Press Tool Kit w/ ProPress Jaws ( 1 2" - 2") RP 340 RP 340 Battery Press Tool Kit w/ ProPress Jaws ( 1 2" - 1") RP 340 RP 340 Battery Press Tool Kit without Jaw Sets RP 340 RP 340 Press Tool Only 6 1 RP 340 Battery Tool with ProPress Jaws RP 340 battery kits include the RP 340, 2 18V Advanced Lithium 2 batteries, battery charger and carrying case. RP 340 Corded Tool with Jaw Sets for ProPress (Copper and Stainless) MODEL RP 340 RP 340 Corded Press Tool Kit w/ ProPress Jaws ( 1 2" - 2") RP 340 RP 340 Corded Press Tool Kit w/ ProPress Jaws ( 1 2" - 1") RP 340 RP 340 Corded Press Tool Kit without Jaw Sets RP 340 RP 340 Press Tool Only 6 1 RP 340 Corded Tool with ProPress Jaws RP 340 Corded tool kits include the RP 340 Corded Tool, power adapter, and carrying case. STANDARD SERIES PRESS JAWS The Standard Series Pressing Jaws were designed in conjunction with Viega, ensuring compatibility. All RIDGID Standard Series pressing jaws are only compatible with RIDGID Standard Series Pressing Tools (320-E, CT-400, RP 330-B, RP 330-C or RP 340). Standard Series Jaw Sets for ProPress (Copper and Stainless) ½" Jaw for ProPress " Jaw for ProPress " Jaw for ProPress ¼" Jaw for ProPress ½" Jaw for ProPress " Jaw for ProPress 10 1 Standard Series Jaw Sets for Viega PureFlow (PEX) ½" Jaw for PureFlow " Jaw for PureFlow " Jaw for PureFlow " Jaw for PureFlow ¼" Jaw for PureFlow ½" Jaw for PureFlow " Jaw for PureFlow 10 1 See page 10 for Viega MegaPress Jaws. Accessories RP 340 Carrying Case V Advanced Lithium Battery Charger V Advanced Lithium Battery Charger Replacement Cord V AC Power Adapter V Advanced Lithium 2 Battery V Advanced Lithium 4 Battery RP 340 Kit 4

6 COMPACT BATTERY-OPERATED INLINE PRESS TOOL ½" to 1¼" Capacity for Copper and Stainless Steel Tubing 3 /8" to 1½" Capacity for PEX Tubing ½" to ¾" Capacity for Steel Pipe RP 241 INLINE PRESS TOOL The RP 241 is 25 percent smaller and 10 percent lighter than its predecessor, making it an ideal solution for pressing copper, stainless steel, black steel and PEX in hard to reach areas. Its lightweight, compact design also helps minimize fatigue and maximize productivity. The RP 241 comes standard with a 12V battery that provides over 140 crimps per charge - three times the competition. It weighs 7.4 pounds, with battery and jaws, and at 15.8 inches is 12 percent shorter in length than the prior model. The tool easily connects to RIDGID Link, providing users data on crimps, service history and more. It is compatible with all prior RIDGID compact series jaws and attachments. SPECIFICATIONS Capacity: 1 2" to 1 1 4" (Copper and Stainless Steel Tubing), 3 8" to 1 1 2" (PEX Tubing), 1 2" to ¾" (Steel Pipe). Inline Design for Access into Tight Spaces. Bluetooth Connectivity through RIDGID Link App. Battery: 12V Advanced Lithium 2.5. Hydraulic Ram Output: 5,400 lbs. (24kN). Weight: Tool Only 4.8 lbs. Tool with Battery 5.3 lbs. Tool with Battery and ½ Jaws 7.4 lbs. Length: 15.8". Height: 4.25". Operating Temperature Range: 15 F to 140 F (-10 C to 60 C). Approximate Cycle Time: ~5 Seconds. Lighting: Large LED Light. Charge: 140+ Crimps Per Charge. 180 Barrel/Jaw Swivel. Service Interval: 32,000 Cycles. THE RP % SMALLER * 10% LIGHTER * RP 241 Kit with 1 2" " ProPress Jaws RP 241 Kit with 1 2" - 1" ProPress Jaws RP 241 Kit with 1 2, ¾" and 1" PureFlow Jaws RP 241 Kit without Jaws RP 241 Press Tool Only 6 1 All RP 241 Kits include the RP 241, 2 12V Lithium-Ion batteries, battery charger, and carrying case. (Excluding Press Tool Only Kit). Compact Jaws for Viega MegaPress Black Steel Pipe ½" - ¾" Compact Jaws for ProPress Copper and Stainless ½" - 1¼" Accessories V Li-Ion Battery V Battery Charger Carrying Case RP Pressing Rings for Viega ProPress Copper and Stainless ½" - 1¼" Compact Jaws for Viega PureFlow PEX 3 8" - 1½" 5

7 COMPACT BATTERY-OPERATED PRESS TOOL ½" to 1¼" Capacity for Copper and Stainless Steel Tubing 3 /8" to 1½" Capacity for PEX Tubing ½" to ¾" Capacity for Steel Pipe RP 240 PRESS TOOL The RP 240 is 15 percent smaller and 10 percent lighter than its predecessor, making it an ideal solution for pressing copper, stainless steel, black steel and PEX in hard to reach areas. Its lightweight, compact design also helps minimize fatigue and maximize productivity. The RP 240 comes standard with a 12V battery that provides over 140 crimps per charge - three times the competition. It weighs 7.4 pounds, with battery and jaws, and at 13.0 inches is 15 percent smaller in length than the prior model. The tool easily connects to RIDGID Link, providing users data on crimps, service history and more. It is compatible with all prior RIDGID compact series jaws and attachments. SPECIFICATIONS Capacity: 1 2" to 1 1 4" (Copper and Stainless Steel Tubing), 3 8" to 1 1 2" (PEX Tubing), 1 2" to ¾" (Steel Pipe). Pistol Grip Design for More Control. Bluetooth Connectivity through RIDGID Link App. Battery: 12V Advanced Lithium 2.5. Hydraulic Ram Output: 5,400 lbs (24kN). Weight: Tool Only 4.8 lbs. Tool with Battery 5.3 lbs. Tool with Battery and ½ Jaws 7.4 lbs. Length: 13". Height: 9.5". Operating Temperature Range: 15 F to 140 F (-10 C to 60 C). Approximate Cycle Time: ~5 Seconds. Lighting: Large LED light. Charge: 140+ Crimps Per Charge. 180 Barrel/Jaw Swivel. Service Interval: 32,000 Cycles. THE RP % SMALLER * 10% LIGHTER * RP 240 Kit with 1 2" " ProPress Jaws RP 240 Kit with 1 2" - 1" ProPress Jaws RP 240 Kit with 1 2, ¾ and 1 PureFlow Jaws RP 240 Kit without Jaws RP 240 Press Tool Only 6 1 All RP 240 Kits include the RP 240, 2 12V Lithium-Ion batteries, battery charger, and carrying case. (Excluding Press Tool Only Kit). Compact Jaws for Viega MegaPress Black Steel Pipe ½" - ¾" Compact Jaws for ProPress Copper and Stainless ½" - 1¼" Accessories V Li-Ion Battery V Battery Charger Carrying Case RP Pressing Rings for Viega ProPress Copper and Stainless ½" - 1¼" Compact Jaws for Viega PureFlow PEX 3 8" - 1½" 6

8 COMPACT SERIES PRESS JAWS RIDGID Compact Series press jaws are 40% lighter and 33% smaller than Standard Series jaws, enabling them to fit into tight spaces. RIDGID Compact Series press jaws are only compatible with RIDGID Compact Series press tools (100-B, RP 200-B, RP 210-B, RP 240, RP 241). Copper and Stainless Compact Series Jaw Sets for Viega ProPress (Copper and Stainless) Compact Jaws for ProPress ½" Jaw for ProPress ¾" Jaw for ProPress " Jaw for ProPress " Jaw for ProPress Black Steel Compact Series Jaw Sets for Viega MegaPress (Black Steel) ½" Jaw for MegaPress ¾" Jaw for MegaPress Compact Jaws for MegaPress PEX PEX Compact Jaws for PureFlow Compact Jaws for ASTM F1807 Compact Series Jaw Sets for Viega PureFlow (PEX) " Jaw for PureFlow ½ Jaw for PureFlow " Jaw for PureFlow ¾" Jaw for PureFlow " Jaw for PureFlow ¼" Jaw for PureFlow ½" Jaw for PureFlow Compact Series Jaw Sets for ASTM F1807 (PEX) ½" Jaw for ASTM F ¾ Jaw for ASTM F " Jaw for ASTM F ¼" Jaw for ASTM F

9 PRESS RINGS Kits MODEL V1 V1 Kit, 1 2", 3 4", 1", 1 1 4" Ring V2 V2 Kit, 1 1 2", 2" Ring C1 C1 Kit, 1 2", 3 4", 1", 1 1 4" Ring V1/C1 V1/C1 Combo Kit, 1 2", 3 4", 1", 1 1 4" Ring PRESS RINGS FOR VIEGA PROPRESS COPPER AND STAINLESS FITTINGS Press Rings for ProPress fittings permit access in tighter spaces and serve as an excellent complement to your RIDGID jaw sets. The swivel actuator allows a press tool to be placed almost 90 degrees in either direction to the tube being pressed! SPECIFICATIONS ProPress Rings are Available in 1 2" to 2" Capacity. V1 and V2 Kits are Designed for RIDGID Standard Press Tools. C1 Compact Kits are Designed for RIDGID Compact Press Tools. Standard Kit Includes: Press Rings, Actuator and Carrying Case. COMPATIBLE WITH ProPress System (Copper and Stainless steel 1 2" to 2"). Rings MODEL V1/C1 1 2" Press Ring V1/C1 3 4" Press Ring V1/C1 1" Press Ring V1/C " Press Ring V " Press Ring V2 2" Press Ring 2 1 Actuators MODEL V1 V1 Actuator for 1 2" " V2 V2 Actuator for 1 1 2" - 2" C1 C1 Actuator for 1 2" " Accessories MODEL V1/C1 Carrying Case #1 for 1 2" " V2 Carrying Case #2 for 1 1 2" - 2" 3 1 RIDGID offers the only rings that provide almost 180 swivel around ring. PRESS RINGS FOR VIEGA PROPRESS XL-C COPPER FITTINGS AND XL-S STAINLESS FITTINGS The patented XL-C/S Press Rings and V2 Actuator give contractors the ability to press copper and steel connections up to 4". The ball-tip V2 Actuator swivels nearly 180 with the XL-C/S Press Rings, allowing increased accessibility when making connections on ProPress XL-C and XL-S fittings. These rings work with all RIDGID Standard Series Pressing Tools to make connections on 2½" to 4" copper or stainless steel tubes (320-E, CT-400, RP 330-B, RP 330-C or RP 340). MODEL XL-C/S 2½" - 4 Rings, Actuator and Case XL-C/S 2½" Press Ring XL-C/S 3" Press Ring XL-C/S 4" Press Ring V2 Ring Actuator XL-C Carrying Case Only

10 FAST FORWARD. PRESS BOOSTER FOR VIEGA MEGAPRESS XL Constant innovation is how we hold our #1 ranking in press tools. Introducing the only tool on the market that lets you press black steel pipe up to 4". The RIDGID Press Booster attaches to the RP 340 to multiply the tool s output for increased power and faster connections. The wait is over. 9

11 PRESS BOOSTER FOR VIEGA MEGAPRESS XL The all new RIDGID Press Booster attaches to Standard Press Tools to multiply tool output for increased power, allowing you to press black steel pipe up to 4" with Viega MegaPress Jaws. You can now eliminate joining methods that can take over 30 minutes, and make connections in seconds. Additionally, without a flame, the RIDGID Press Booster with MegaPress XL does not require a hot work permit or fire watch. STANDARD RINGS FOR MEGAPRESS XL - 2½" to 4" For use with RIDGID Standard Press Tools with Press Booster (RP 340, RP 330). WEIGHT INCLUDED IN (LB.) (KG) ½" Ring for MegaPress XL 5.9 2, " Ring for MegaPress XL 7.1 3, " Ring for MegaPress XL 9.9 4, Press Booster For MegaPress XL ,8 3 Kits ACCESSORIES (LB.) WEIGHT ½" to 4" MegaPress XL Kit with Press Booster ,8 (KG) WEIGHT (LB.) (KG) ½" to 1" MegaPress End Prep Tool 1.8 0, ¼" to 2" MegaPress End Prep Tool 2.5 1, Abrasive Strips (Box of 10) ½" - 1" , Abrasive Strips (Box of 10) 1¼" - 2" ,02 Case WEIGHT INCLUDED IN (LB.) (KG) Press Booster for MegaPress XL Carrying Case 6.4 2,9 3 3 MegaPress is a registered trademark of Viega GmbH & Co. All sales subject to Ridge Tool Company Terms and Conditions of Sales. 10

12 PRESS JAWS AND RINGS FOR VIEGA MEGAPRESS RIDGID compact tools are compatible with Viega MegaPress Jaws and Rings which improve speed and efficiency by making connections without the use of heavy equipment, metal shavings or cutting oils. In addition, its flameless system eliminates the need for hot work permits. The full MegaPress system allows you to join ½" 2" commercially-available Schedule 5-40 Black Iron Pipe. COMPACT JAWS FOR MEGAPRESS - ½" to ¾" For use with RIDGID Compact Press Tools (RP 241, RP 240, RP 210-B, RP 200-B, RP 100-B). WEIGHT INCLUDED IN (LB.) (KG) ½" Jaw for MegaPress 3.0 1, ¾" Jaw for MegaPress 3.2 1,5 STANDARD JAWS AND RINGS FOR MEGAPRESS - ½" to 2" For use with RIDGID Standard Press Tools (RP 340, RP 330, 320-E, CT 400). Jaws WEIGHT INCLUDED IN (LB.) (KG) " Jaw for MegaPress 4.9 2, ¾" Jaw for MegaPress 5.2 2, " Jaw for MegaPress 6.8 3,1 3 3 Rings and Actuators WEIGHT INCLUDED IN (LB.) (KG) ¼" Ring for MegaPress 6.0 2, ½" Ring for MegaPress 6.5 2, " Ring for MegaPress 6.0 2, V2 Ring Actuator for MegaPress 6.7 3,1 3 Kits WEIGHT (LB.) (KG) ½" to 2" MegaPress Kit , ½" to 1" MegaPress Kit ,5 11

13 TM PEX-One 12V BATTERY PEX TOOL ½" to 1" Capacity For the professional plumber who installs or repairs PEX plumbing systems, the RIDGID PEX-One 12V Battery PEX Tool is designed to be lightweight, low-profile and to press multiple-size connections, up to one inch, with a single tool. The first in its class, RIDGID PEX-One gives you the one-handed capability you need for easy and accurate press connections in all those tight spaces V ADVANCED LITHIUM 2.5 BATTERY CRIMPS PER CHARGE ½", ¾" & 1" INTERCHANGEABLE DIES FITTINGS 5.8 LBS. ERGONOMIC, LIGHTWEIGHT DESIGN (WITH BATTERY) FEATURES AND BENEFITS Connect the tool to the fitting and complete the press cycle all with one hand, leaving your second hand free to support and guide the connections. Compact and lightweight inline design fits into tight spaces that some manual crimp tools can t reach. Press PEX connections from ½"-1" with a single tool. Compatible with ½"-1" ASTM F1807 and Viega PureFlow TM fittings. ~5-second crimp cycle. PEX-One Tools Dies PEX-One Kit for ASTM F PEX-One Kit for PureFlow PEX-One Tool Only ½" - 1" PureFlow Dies Set ½" - 1 ASTM F1807 Dies Set ½" ASTM F1807 Die ¾" ASTM F1807 Die " ASTM F1807 Die ½" PureFlow Die ¾" PureFlow Die " PureFlow Die Accessories V Li-Ion Battery V Battery Charger RIDGID Bag, 20", Soft-Sided Die Caddy

14 MANUAL PEX CRIMP TOOLS ½" to 1" Capacity ASTM F1807 PEX CRIMP TOOLS The RIDGID ASTM F1807 PEX Crimp Tools are ideal for making PEX tubing connections in potable water and radiant heating applications with ASTM F1807 copper crimp rings. The handles are constructed of a durable, glass-filled polycarbonate making the tools over 20% lighter than traditional-style crimp tools, yet rugged enough for the toughest jobs. The E 3 (Expert Engineered Ergonomics) handles provide increased comfort and durability. 1 2" and 3 4" Close Quarters PEX Crimp Tool SPECIFICATIONS Available sizes: 1 2", 3 4", 1" and 1 2" and 3 4" combo tool. Easily adjustable lock screw for tool calibration. All tools come standard with a go/no-go gauge " PEX Crimp Tool " PEX Crimp Tool " PEX Crimp Tool " and 3 4" PEX Combo Tool " PEX Close Quarters Crimp Tool " PEX Close Quarters Crimp Tool ASTM F1807 PEX Crimp Tool Accessories "- 3 4" ASTM F1807 gauge " ASTM F1807 gauge " - 1" Go/No Go gauge 1 1 PRESS SNAP SOIL PIPE CUTTER SOIL PIPE CUTTER ATTACHMENT The Press Snap Soil Pipe Cutter expands the capabilities of RIDGID standard press tools by providing a fast and easy way to cut cast iron soil pipe. Without lengthy lever arms used by traditional soil pipe cutters, improved access is a snap. Simply connect the Press Snap cutter to a RIDGID press tool and wrap the chain around the pipe to cut most 1½" to 4" soil pipe in seconds. No manual ratcheting or additional tools are required. Cutting soil pipe has never been so easy! SPECIFICATIONS Compatible with all RIDGID standard press tools. Cuts 1½" to 4" no hub and service weight soil pipe. Standard Kit: Press Snap cutter, case and operator s manual. FEATURES Eliminates the need to score the pipe. Completes the cut in seconds Press Snap Soil Pipe Cutter Kit Press Snap Soil Pipe Cutter Case

15 THE FASTEST, MOST RELIABLE PRESS TOOLS Compact Standard FEATURES BENEFITS RIDGID RP 241 RIDGID RP 240 RIDGID RP 340 Weight (tool and battery) Lightweight, providing maximum comfort. 5.2 lbs. 5.2 lbs. 8.3 lbs. Battery For convenience and maximum portability. 12V Advanced Lithium 2.5 Battery 12V Advanced Lithium 2.5 Battery 18V Advanced Lithium 2 Battery Rotating Barrel Viega ProPress Compatible Viega PureFlow Compatible ASTM F1807 Compatible Viega MegaPress Compatible Lock-On Cycle Completion Auto Ram Retraction Jaw Pin Closure Sensor Automatic Maintenance Reminder and Low Battery Sensor Tool barrel rotates, allowing access into the tightest spaces. Press Viega ProPress Copper and Stainless Fittings ½" to 4" Press Viega PureFlow Fittings ½" to 2" Press ASTM F1807 Copper Ring PEX Systems ½" to 1¼" Press Viega MegaPress Steel Fittings ½" to 4" Cycle completes automatically once pressing action begins, ensuring a reliable connection every time. Ram returns to start position automatically, providing maximum speed with every connection. Prevents cycle from starting if pin is not fully engaged, preventing tool damage. Automatic calibration reminder to ensure optimal performance. Alerts user to insufficient battery power, providing maximum reliability with every connection ½" " ½" " ½" - 4" 3 8" " 3 8" " ½" - 2" ½" " ½" " N/A ½" - 3 4" ½" - 3 4" ½" - 4" Warranty RIDGID Full Lifetime Warranty. 14

16 2018, RIDGID, Inc. The Emerson logo and RIDGID logo are registered trademarks of Emerson Electric Co. or RIDGID, Inc. in the U.S. and other countries. All other trademarks belong to their respective holders. *Compared to previous RIDGID models /2018