2015 PRODUCTS. TÜV NORD CERT GmbH. Made in Germany

Transcription

1 2015 PRODUCTS TÜV NORD CERT GmbH Made in Germany Product test acc. to TN-Standard A75-S018

2 Product test acc. to TN-Standard A75-S018 CONTENTS INTRODUCTION THE SPAX Highlights WE CONNECT THE WORLD HERE WE ARE Brief overview SPAX THE UNIVERSAL SCREW Flat countersunk head T-STAR plus Blue zinc plated Zinc yellow passivated Cross recess, type Z Blue zinc plated With continuous hinge head...52 With centre drill...53 Cover caps...53 Zinc yellow passivated With continuous hinge head...63 Bronze finish Pan head T-STAR plus Blue zinc plated Cross recess, type Z Blue zinc plated Raised countersunk head T-STAR plus Blue zinc plated Cross recess, type Z Blue zinc plated Nickel plated...84 Flange head Cross recess, type Z Blue zinc plated...88 TÜV Nord Cert GmbH Made in Germany CUT-CASE, 4CUT, T-STAR plus, Kaiman are registered trademarks.

3 FOR WOOD CONSTRUCTION Flat countersunk head Partial thread Full thread zinc yellow passivated Partial thread zinc yellow passivated Washer head Partial/full thread Partial thread zinc yellow passivated Cylindric head Full thread SPAX Threaded rod Screw-sleeve Screwing aid SPECIALS INDOOR SPECIALS SPAX-M for MDF boards SPAX The flooring screw SPAX for solid-wood flooring SPAX Collated screws Coil STAINLESS STEEL OUTDOOR UNIVERSAL FLAT COUNTERSUNK HEAD T-STAR plus PAN HEAD T-STAR plus RAISED COUNTERSUNK HEAD T-STAR plus FLAT COUNTERSUNK HEAD Cross recess, type Z OUTDOOR CONSTRUCTION Flat countersunk head Full thread Washer head Full and partial thread OUTDOOR SPECIALS Facade The screw for wooden facades Decking The ideal screw for wooden decks Path and footbridge Accessories Decking The screw for posts Fence fastener set EXTRAS Assembly boxes T-STAR plus / Cross recess, type Z ORDER SYSTEMS The shelf system LAGERBOY The shelf on wheels Speedy WINDOW CONSTRUCTION These products can in future be found exclusively in our new window construction catalogue: FEX-A, FEX-KS, FEX-RS, FEX-fitting screw, FEX-H, FEX-combi screw, FEX-coupling screw, SPAX-RA, SPAX glass strip screw BIT-PROGRAMME SPAX-BIT in SPAX CUT-CASE SPAX-BITcheck THE LITTLE ABC OF SCREWS Learn more about screws Recess types, head, thread and point shapes SPAXI

4 THE SPAX HIGHLIGHTS 2015 NEW Path and footbridge For decks, paths and footbridges, stainless steel A4 Cylindric head Fixing thread T-STAR plus T40 CUT point Stainless steel A4 Slide-coated from page 160 NEW Wood construction A4 10 and 12 mm flat countersunk head, stainless steel A4 Flat countersunk head With milled ribs T-STAR plus T50 CUT point Stainless steel A4 Slide-coated from page 144

5 NEW BITcheck for wood construction T-STAR plus Ensure a better fit and prevent slippage even when working overhead Better transmission of force Long life Quick threading Better seating Quicker access through colour coding Incl. T-STAR plus T50 on page 181 NEW Kaiman pro For the easy alignment of warped coverboards Wrench for the easy alignment of warped decking Positioning guide (Liner) Joint gauge for 4 joint widths: 4, 5, 6, 7 mm on page

6 INTRODUCTION WE CONNECT THE WORLD

7 TÜV NORD CERT GmbH Product test acc. to TN-Standard A75-S018 Regional, global, traditional, innovative The SPAX outperforms everything. Its history is unique: Almost two centuries of innovative and global experience in the development of fastening elements make the SPAX extraordinary. Your specialist for modern fastening technology Our smart staff is constantly developing new ideas, extending our product range and delivering top quality for the DIY market and the specialised global trade. Company foundation of ALTENLOH, BRINCK & CO SPAX International GmbH & Co. KG Made in Germany 1800 First exports First fully automatic machine 1900 for screw production SPAX revolutionises the screw market Establishment of the ALTENLOH, BRINCK & CO GROUP ALTENLOH, BRINCK & CO International ABC Umformtechnik und Zubehör AZ Ausrüstung SABEU GmbH & Co. KG 6 7

8 INTRODUCTION HERE WE ARE

9 Product test acc. to TN-Standard A75-S018 SPAX International GmbH & Co. KG - We get involved at home and abroad SPAX is a company with a long-standing tradition and a great future. Meanwhile, our SPAX brand has become available all over the world. Nevertheless, we know where we belong. That is why we remain loyal to the Made in Germany commitment and will also keep our Ennepetal site in the future. Furthermore: We are actively involved in many areas here in particular. For instance, we provide dedicated and qualified vocational training in our apprenticeship workshop at the Ennepetal site. Being involved in our local community is part of our corporate philosophy; just as is our commitment in a globalised world. SPAX International, Ennepetal SPAX TORNILLERIA, Madrid SPAX SAFER, Barcelona SPAX UK, Wolverhampton SPAX FRANCE, Paris SPAX POLSKA, Krakau SPAX İSTANBUL BAĞLANTI TEKNİĞİ TİCARET, Istanbul SPAX Asia, Hong Kong ALTENLOH, BRINCK & CO. U.S., INC., Bryan, OH SPAX PACIFIC, North Cairns TÜV NORD CERT GmbH Made in Germany 8 9

10 BRIEF OVERVIEW UNIVERSAL Flat countersunk head, for T-STAR plus or with cross recess, type Z Blue zinc plated A2J T-STAR plus, full thread T-STAR plus, partial thread Range of standard packings Ø [mm] [mm] Ø dk [mm] Cross recess, type Z, full thread Cross recess, type Z, partial thread Ø dk = Head diameter in mm

11 Flat countersunk head, for T-STAR plus or with cross recess, type Z Blue zinc plated A2J [mm] T-STAR plus, full thread T-STAR plus, partial thread Range of small packings Ø [mm] Ø dk [mm] Cross recess, type Z, full thread Cross recess, type Z, partial thread Ø dk = Head diameter in mm 10 11

12 BRIEF OVERVIEW UNIVERSAL Flat countersunk head, for T-STAR plus or with cross recess, type Z Zinc yellow passivated A2L Range of standard packings Ø [mm] [mm] Ø dk [mm] T-STAR plus, full thread T-STAR plus, partial thread Cross recess, type Z, full thread Cross recess, type Z, partial thread Ø dk = Head diameter in mm

13 Flat countersunk head, for T-STAR plus or with cross recess, type Z Zinc yellow passivated A2L [mm] Range of small packings Ø [mm] Ø dk [mm] T-STAR plus, full thread T-STAR plus, partial thread Cross recess, type Z, full thread Cross recess, type Z, partial thread Ø dk = Head diameter in mm 12 13

14 BRIEF OVERVIEW UNIVERSAL Pan head, for T-STAR plus or with cross recess, type Z Blue zinc plated A2J Range of standard packings Ø [mm] [mm] Ø dk [mm] T-STAR plus, full thread T-STAR plus, partial thread Pan head, T-STAR plus Blue zinc plated A2J T-STAR plus, full thread Cross recess, type Z, full thread Cross recess, type Z, partial thread Range of small packings Ø [mm] [mm] Ø dk [mm] Ø dk = Head diameter in mm Ø dk = Head diameter in mm

15 Raised countersunk head, for T-STAR plus or with cross recess, type Z Blue zinc plated A2J Range of standard packings Ø [mm] [mm] Ø dk [mm] T-STAR plus, full thread Cross recess, type Z, full thread Ø dk = Head diameter in mm Raised countersunk head, cross recess, type Z Nickel plated E1J Range of standard packings Ø [mm] [mm] Ø [mm] Cross recess, type Z, full thread Ø dk = Head diameter in mm 14 15

16 BRIEF OVERVIEW UNIVERSAL Flangehead, cross recess, type Z Blue zinc plated A2J Range of standard packings Ø [mm] [mm] Ø [mm] Cross recess, type Z, full thread Ø dk = Head diameter in mm

17 BRIEF OVERVIEW WOOD CONSTRUCTION Flat countersunk head, T-STAR plus P3J Range of standard packings Zinc yellow passivated A2L Ø [mm] [mm] Ø dk [mm] T-STAR plus, full thread T-STAR plus, partial thread Ø dk = Head diameter in mm 16 17

18 BRIEF OVERVIEW WOOD CONSTRUCTION Washer head, T-STAR plus T-STAR plus, full thread T-STAR plus, partial thread Range of standard packings P3J Zinc yellow passivated A2L Ø [mm] [mm] Ø dk [mm] * Ø dk = Head diameter in mm Cylindric head, T-STAR plus [mm] Range of standard packings T-STAR plus, full thread P3J Ø [mm] Ø dk [mm] Ø dk = Head diameter in mm * Other surface: WIROX P5J

19 BRIEF OVERVIEW INDOOR SPECIALS SPAX-M, flat countersunk head, T-STAR plus Blue zinc plated A2J Range of standard packings Ø [mm] [mm] Ø dk [mm] T-STAR plus, partial thread Ø dk = Head diameter in mm SPAX for solid wood flooring, flat countersunk head, T-STAR plus Zinc yellow passivated A2L [mm] Range of standard packings Ø [mm] 4.5 Ø dk [mm] 8.8 Range of standard packings Ø [mm] 3.5 [mm] Ø dk [mm] T-STAR plus, fixing thread Ø dk = Head diameter in mm T-STAR plus, partial thread Ø dk = Head diameter in mm 18 19

20 BRIEF OVERVIEW OUTDOOR Flat countersunk head, for T-STAR plus or with cross recess, type Z Stainless steel A T-STAR plus, full thread T-STAR plus, partial thread Range of small packings Ø [mm] [mm] Ø dk [mm] Cross recess, type Z, full thread Cross recess, type Z, partial thread Ø dk = Head diameter in mm Pan head, T-STAR plus Stainless steel A T-STAR plus, full thread Range of small packings Ø [mm] [mm] Ø dk [mm] Ø dk = Head diameter in mm

21 Raised countersunk head, T-STAR plus Stainless steel A Range of small packings Ø [mm] [mm] Ø dk [mm] T-STAR plus, full thread Ø dk = Head diameter in mm Flat countersunk head, T-STAR plus Stainless steel A Range of standard packings Ø [mm] [mm] Ø dk [mm] T-STAR plus, full thread Ø dk = Head diameter in mm 20 21

22 BRIEF OVERVIEW OUTDOOR Washer head, T-STAR plus Stainless steel A Range of standard packings Ø [mm] [mm] Ø dk [mm] T-STAR plus, full thread T-STAR plus, partial thread Ø dk = Head diameter in mm Facade, raised countersunk head, T-STAR plus Stainless steel A Range of small packings Ø [mm] [mm] Ø dk [mm] T-STAR plus, partial thread Ø dk = Head diameter in mm

23 Facade, raised countersunk head, with fixing thread, T-STAR plus Stainless steel A Stainless steel A2 antique [mm] Range of small packings Ø [mm] 4.5 Ø dk [mm] 8.0 [mm] Range of small packings Ø [mm] 4.5 Ø dk [mm] 8.0 T-STAR plus, fixing thread Ø dk = Head diameter in mm T-STAR plus, fixing thread Facade, raised countersunk head, with very small head, T-STAR plus Stainless steel A Range of small packings Ø [mm] [mm] Ø dk [mm] T-STAR plus, partial thread Ø dk = Head diameter in mm 22 23

24 BRIEF OVERVIEW OUTDOOR Decking, cylindric head, T-STAR plus Stainless steel A Stainless steel A2 antique [mm] Range of small packings Ø [mm] 5.0 Ø dk [mm] 7.0 [mm] Range of small packings Ø [mm] 5.0 Ø dk [mm] 7.0 T-STAR plus, fixing thread Ø dk = Head diameter in mm T-STAR plus, fixing thread Ø dk = Head diameter in mm Decking, cylindric head, T-STAR plus Stainless steel A Stainless steel A4 antique [mm] Range of small packings Ø [mm] 5.5 Ø dk [mm] 7.0 [mm] Range of small packings Ø [mm] 5.5 Ø dk [mm] 7.0 T-STAR plus, fixing thread Ø dk = Head diameter in mm T-STAR plus, fixing thread Ø dk = Head diameter in mm

25 Path and footbridge, cylindric head, T-STAR plus Stainless steel A [mm] 120 Range of standard packings Ø [mm] 8.0 Ø dk [mm] 10.0 T-STAR plus, fixing thread Ø dk = Head diameter in mm 24 25

26 SPAX THE UNIVERSAL SCREW FLAT COUNTERSUNK HEAD T-STAR plus Blue zinc plated Zinc yellow passivated Cross recess, type Z Blue zinc plated With continuous hinge head With centre drill Cover caps Zinc yellow passivated With continuous hinge head Bronze finish PAN HEAD T-STAR plus Blue zinc plated Cross recess, type Z Blue zinc plated RAISED COUNTERSUNK HEAD T-STAR plus Blue zinc plated Cross recess, type Z Blue zinc plated Nickel plated FLANGE HEAD Cross recess, type Z Blue zinc plated... 88

27 26 27

28 Product test acc. to TN-Standard A75-S018 SPAX THE UNIVERSAL SCREW Flat countersunk head T-STAR plus / cross recess, type Z TÜV NORD CERT GmbH Made in Germany The SPAX tip SPAX wood screw. The market leader. and finishes.

29 Flat countersunk head T-STAR plus / Cross recess, type Z with full thread The 4CUT has a square core with 4 cutting edges. The wood fibres are displaced and therefore splitting of the material is effectively reduced even in the case of short edge distances. The ground serrations reach right down to the point, bite into the material immediately, and are easy to drive. The MULTI Head cuts into wood and brakes on metal. The screw head countersinks more easily and cleanly in all timbers. with partial thread SPAX with partial thread is recommended for the gap-free bolting of two components. If you tried to bolt two wooden components together using a total thread screw, the thread would get in the way. It would not be possible to sufficiently draw the components together; a gap might occur between the components. However, a SPAX with partial thread ensures a secure and solid bolting without forming any gap. The pretensioning effect between the head and the thread bite that only acts on the lower component pulls the components firmly together. The advantages 4CUT no pre-drilling (wood-dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque. Ground serrations for quick and secure fastening. MULTI Head flush countersinking. Mills in wood and stops on metal. T-STAR plus positive and secure fit of the BIT and better driving, e. g. when working overhead. Surface finishes Blue zinc plated Zinc yellow passivated Bronze finish A2J A2L C1A 28 29

30 SPAX THE UNIVERSAL SCREW Flat countersunk head T-STAR plus 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 3.0 * total full thread LgV Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10, , ,000 10, , ,000 10, , Craft package , , , , , , , , , , Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , Craft package , , , , , , , , , , , , , , * alternative design BIT size T SPAX BOX Master carton Pallet qty

31 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 4.0 total full thread LgV BIT size T SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , , , , , Craft package , , , , , , , , , , , , Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , , , , , , , , , , , , , Craft package , , , , , , ,000 64, ,000 63, ,000 63, Pallet qty 30 31

32 SPAX THE UNIVERSAL SCREW Flat countersunk head T-STAR plus 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. Thread Ø d1 total full thread LgV BIT size T SPAX BOX Master carton Pallet qty EAN code 5.0 Standard package ,000 10, , = ,000 10, , mm , , , , , , , , , , , , ,000 64, ,000 64, Craft package , , , , ,000 64, ,000 63, ,000 32, ,000 32, Standard package ,000 64, = ,000 56, mm ,000 56, ,000 56, Craft package ,000 32, ,000 32, ,000 32, ,000 32,

33 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 3.0 * total partial thread LgT Standard package ,000 10, , = ,000 10, , mm ,000 10, , Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , , , Craft package , , , , , , , , , , Standard package ,000 10, , = ,000 10, , mm ,000 10, , , , , , , , , , ,000 64, Craft package , , , , , , , , , , ,000 64, ,000 32, * alternative design BIT size T SPAX BOX Master carton Pallet qty 32 33

34 SPAX THE UNIVERSAL SCREW Flat countersunk head T-STAR plus 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 4.5 total partial thread LgT BIT size T SPAX BOX Master carton Standard package ,000 10, , = , , mm , , , , , , , , , , ,000 64, Craft package , , , , , , , , ,000 64, ,000 64, ,000 64, ,000 32, Pallet qty

35 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 5.0 total partial thread LgT BIT size T SPAX BOX Master carton Standard package , , = , , mm , , , , , , , , , , ,000 64, ,000 64, ,000 64, ,000 64, ,000 56, Craft package , , , , , , , , ,000 64, ,000 64, ,000 32, ,000 32, ,000 32, ,000 32, Pallet qty 34 35

36 SPAX THE UNIVERSAL SCREW Flat countersunk head T-STAR plus 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 6.0 total partial thread LgT BIT size T SPAX BOX Master carton Standard package , , = ,000 64, mm ,000 56, ,000 56, ,000 56, ,000 56, ,000 32, ,000 32, ,000 28, ,000 28, ,000 28, ,000 28, ,000 28, ,000 28, ,000 24, ,000 24, ,000 24, , , , Craft package ,000 32, ,000 32, ,000 32, ,000 32, ,000 32, Pallet qty

37 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 3.0 * total full thread LgV Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10, , ,000 10, , Craft package , , , , , , , , Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , Craft package , , , , , , Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , Craft package , , , , * alternative design BIT size T SPAX BOX Master carton Pallet qty 36 37

38 SPAX THE UNIVERSAL SCREW Flat countersunk head T-STAR plus 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 3.0 * total partial thread LgT Standard package ,000 10, , = ,000 10, , mm ,000 10, , Craft package , , , , , , Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , , , Craft package , , , , , , , , , , * alternative design BIT size T SPAX BOX Master carton Pallet qty

39 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 4.0 total partial thread LgT BIT size T SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , , , , , , , , , ,000 64, Craft package , , , , , , , , , , ,000 64, ,000 32, Standard package ,000 10, , = , , mm , , , , , , , , , , ,000 64, Craft package , , , , , , , , ,000 64, ,000 64, ,000 64, ,000 32, Pallet qty 38 39

40 SPAX THE UNIVERSAL SCREW Flat countersunk head T-STAR plus 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 5.0 total partial thread LgT BIT size T SPAX BOX Master carton Standard package , , = , , mm , , , , , , , , , , ,000 64, ,000 64, ,000 64, ,000 64, ,000 56, Craft package , , , , , , , , ,000 64, ,000 64, ,000 32, ,000 32, ,000 32, ,000 32, Pallet qty

41 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 6.0 total partial thread LgT BIT size T SPAX BOX Master carton Standard package , , = ,000 64, mm ,000 56, ,000 56, ,000 56, ,000 56, ,000 32, ,000 32, ,000 28, ,000 28, ,000 28, ,000 28, ,000 28, ,000 28, ,000 24, ,000 24, ,000 24, , , , Craft package ,000 32, ,000 32, ,000 32, ,000 32, ,000 32, Pallet qty 40 41

42 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 2.5 * total full thread LgV Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10, , * Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , Craft package , , , , , , , , , , , , , , * alternative design BIT size cross recess, type Z SPAX BOX Master carton Pallet qty

43 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 3.5 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , , , Craft package , , , , , , , , , , , , , , , , , , Pallet qty 42 43

44 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 4.0 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , , , , , , , , , , , ,000 64, Craft package , , , , , , , , , , , , , , , , , , ,000 63, ,000 32, Pallet qty

45 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 4.5 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , , , , , , , , , , , , , , , ,000 64, Craft package , , , , , , , , , , , , , , ,000 64, ,000 63, ,000 32, ,000 32, Pallet qty 44 45

46 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 5.0 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , , , , , , , , , , , , , , , ,000 64, ,000 64, ,000 64, Craft package , , , , , , , , , , , , ,000 64, ,000 63, ,000 63, ,000 32, ,000 32, Pallet qty

47 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 6.0 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package , , = , , mm , , , , ,000 64, ,000 64, ,000 56, ,000 56, ,000 56, Craft package ,000 64, ,000 64, ,000 32, ,000 32, ,000 32, ,000 32, Pallet qty 46 47

48 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 3.5 total partial thread LgT BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , , , Craft package , , , , , , Standard package ,000 10, , = ,000 10, , mm ,000 10, , , , , , , , , , Craft package , , , , , , , , , , ,000 63, Pallet qty

49 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 4.5 total partial thread LgT BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10, , = , , mm , , , , , , , , , , , , Craft package , , , , , , , , ,000 64, ,000 63, ,000 32, Pallet qty 48 49

50 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 5.0 total partial thread LgT BIT size cross recess, type Z SPAX BOX Master carton Standard package , , = , , mm , , , , , , ,000 64, ,000 64, ,000 64, ,000 64, ,000 64, ,000 64, ,000 56, Craft package , , , , ,000 64, ,000 63, ,000 32, ,000 32, ,000 32, ,000 32, Pallet qty

51 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 6.0 total partial thread LgT BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 64, = ,000 56, mm ,000 56, ,000 56, ,000 56, ,000 32, ,000 32, ,000 28, ,000 28, ,000 28, ,000 28, ,000 28, ,000 28, ,000 24, ,000 24, ,000 24, Craft package ,000 32, ,000 32, ,000 32, ,000 32, ,000 32, Pallet qty 50 51

52 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z SKH-013 Flat countersunk head, cross recess, type Z With continuous hinge head (Ø 5 mm), case hardened, slide-coated LgV 90 Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 3.0 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10, , ,000 10, , ,000 10, , Pallet qty

53 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z With centre drill (Ø 2.5 mm), case hardened, slide-coated LgV 90 Ø d1 Blue zinc plated A2J Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 4.5 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , , , , , , , , , , , , , , , ,000 64, , , = ,000 64, mm ,000 64, ,000 56, ,000 56, = ,000 32, mm ,000 28, Pallet qty Plastic cover caps caps, applicable for SPAX with centre drill, packed in units of 500 Colour SPAX-No. EAN code White Black Grey Beige Colour SPAX-No. EAN code Ochre Hazel brown Mahagony

54 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 2.0 * total full thread LgV Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, * Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10, , * Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , Craft package , , , , , , , , , , , , , , * alternative design BIT size cross recess, type Z SPAX BOX Master carton Pallet qty

55 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 3.5 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , , , Craft package , , , , , , , , , , , , , , , , , , Pallet qty 54 55

56 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 4.0 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , , , , , , , , , , , ,000 64, Craft package , , , , , , , , , , , , , , , , ,000 63, ,000 32, Pallet qty

57 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 4.5 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , , , , , , , , , , , , , , , ,000 64, Craft package , , , , , , , , , , , , , , ,000 64, ,000 63, ,000 32, ,000 32, Pallet qty 56 57

58 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 5.0 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , , , , , , , , , , , , , , , ,000 64, ,000 64, Craft package , , , , , , , , , , , , ,000 64, ,000 63, ,000 63, ,000 32, ,000 32, Pallet qty

59 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 6.0 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package , , = , , mm , , , , ,000 64, ,000 64, ,000 56, ,000 56, ,000 56, Craft package ,000 64, ,000 64, ,000 32, ,000 32, ,000 32, ,000 32, Pallet qty 58 59

60 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 3.5 total partial thread LgT BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , , , Craft package , , , , , , Standard package ,000 10, , = ,000 10, , mm ,000 10, , , , , , , , , , Craft package , , , , , , , , , , ,000 63, Standard package ,000 10, , = , , mm , , , , , , , , , , , , Pallet qty

61 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 4.5 total partial thread LgT Craft package BIT size cross recess, type Z SPAX BOX Master carton , , = , , mm , , , , ,000 64, ,000 63, ,000 32, Standard package , , = , , mm , , , , , , ,000 64, ,000 64, ,000 64, ,000 64, ,000 64, ,000 56, Craft package , , , , ,000 64, ,000 63, ,000 32, ,000 32, ,000 32, ,000 32, Pallet qty 60 61

62 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 6.0 total partial thread LgT BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 64, = ,000 56, mm ,000 56, ,000 56, ,000 56, ,000 32, ,000 32, ,000 28, ,000 28, ,000 28, ,000 28, ,000 28, ,000 28, ,000 24, ,000 24, ,000 24, Craft package ,000 32, ,000 32, ,000 32, ,000 32, ,000 32, Pallet qty

63 SKH-013 Flat countersunk head, cross recess, type Z With continuous hinge head (Ø 5 mm), case hardened, slide-coated LgV 90 Ø d1 Zinc yellow passivated A2L Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 3.0 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10, , ,000 10, , ,000 10, , Pallet qty 62 63

64 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Bronze finish C1A Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 2.5 * total full thread LgV Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10, , * ,000 10,000 1,120, ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10,000 1,120, ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , , , ,000 10, , ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , , , , , , , , , * alternative design BIT size cross recess, type Z SPAX BOX Master carton Pallet qty

65 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø dk Ø d1 Bronze finish C1A Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 4.5 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton Standard package ,000 10, , = ,000 10, , mm , , , , , , , , , , , , ,000 64, , , , , = , , mm , , , , , , ,000 64, ,000 64, ,000 64, ,000 56, = ,000 56, mm ,000 56, Pallet qty 64 65

66 SPAX THE UNIVERSAL SCREW Flat countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø dk Ø d1 Bronze finish C1A Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 5.0 Standard package = ,000 64, mm ,000 56, = 11.6 mm total partial thread LgT BIT size cross recess, type Z SPAX BOX Master carton Pallet qty ,000 32, ,000 28,

67 66 67

68 Product test acc. to TN-Standard A75-S018 SPAX THE UNIVERSAL SCREW Pan head T-STAR plus / cross recess, type Z TÜV NORD CERT GmbH Made in Germany The SPAX tip SPAX

69 Pan head T-STAR plus / cross recess, type Z SPAX pan head screw The advantages 4CUT no pre-drilling (wood-dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque. Ground serrations T-STAR plus Surface finishes Blue zinc plated A2J 68 69

70 SPAX THE UNIVERSAL SCREW Pan head T-STAR plus 13 DoP 1 SKH CPD-I ETA-12/0114 Pan head, T-STAR plus 4CUT, case hardened, slide-coated Lg Ø d1 Blue zinc plated A2J 3.0 * Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10,000 1,120, ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , Craft package , , , , , , , , , , , , Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , Craft package , , , , , , , , , , , , T-STAR plus, Master carton T-STAR plus,

71 13 DoP 1 SKH CPD-I ETA-12/0114 Pan head, T-STAR plus 4CUT, case hardened, slide-coated Lg Ø d1 Blue zinc plated A2J 4.0 Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 5, , , , , , , , , , Craft package , , , , , , , , , , , , , , , , , , T-STAR plus, T-STAR plus, You will find this screw also in the STAINLESS STEEL section see page

72 SPAX THE UNIVERSAL SCREW Pan head T-STAR plus 13 DoP 1 SKH CPD-I ETA-12/0114 Pan head, T-STAR plus 4CUT, case hardened, slide-coated Lg Ø d1 Blue zinc plated A2J 4.5 Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , , , , , , , , , , , , , Craft package , , , , , , , , , , , , , , ,000 64, T-STAR plus, T-STAR plus,

73 13 DoP 1 SKH CPD-I ETA-12/0114 Pan head, T-STAR plus 4CUT, case hardened, slide-coated Lg Ø d1 Blue zinc plated A2J Master carton 5.0 Standard package ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , , , , , , , , , ,000 64, ,000 64, ,000 64, ,000 64, ,000 64, ,000 64, Craft package , , , , , , , , , , , , ,000 63, ,000 63, ,000 32, ,000 32, T-STAR plus, T-STAR plus, 72 73

74 SPAX THE UNIVERSAL SCREW Pan head T-STAR plus 13 DoP 1 SKH CPD-I ETA-12/0114 Pan head, T-STAR plus 4CUT, case hardened, slide-coated Lg Ø d1 Blue zinc plated A2J 6.0 Master carton Standard package , , = , , mm , , , , , , ,000 64, ,000 64, ,000 56, ,000 56, ,000 56, ,000 56, ,000 32, Craft package ,000 64, ,000 32, T-STAR plus, T-STAR plus,

75 74 75

76 SPAX THE UNIVERSAL SCREW Pan head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Pan head, cross recess, type Z 4CUT, case hardened, slide-coated Lg Ø d1 Blue zinc plated A2J 3.0 * Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10,000 1,120, ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 5, , , , , , , , , , ,000 10, , = ,000 10, , mm ,000 10, , Cross recess, type Z, Cross recess, type Z, cross recess, type Z Master carton

77 13 DoP 1 SKH CPD-I ETA-12/0114 Pan head, cross recess, type Z 4CUT, case hardened, slide-coated Lg Ø d1 Blue zinc plated A2J 4.5 cross recess, type Z Master carton Standard package ,000 10, , = ,000 10, , mm ,000 10, , , , , , , , , , , , , , ,000 10, , ,000 10, , = ,000 10, , mm ,000 10, , , , , , , , , , ,000 64, ,000 64, ,000 64, ,000 64, ,000 64, ,000 64, , , , , = , , mm , , , , ,000 64, ,000 64, ,000 56, ,000 56, ,000 56, ,000 56, ,000 32, Cross recess, type Z, 76 77

78 Product test acc. to TN-Standard A75-S018 SPAX THE UNIVERSAL SCREW Raised countersunk head T-STAR plus / cross recess, type Z The SPAX tip TÜV NORD CERT GmbH Made in Germany

79 Raised countersunk head T-STAR plus / cross recess, type Z raised countersunk head is a raised countersunk head The advantages 4CUT no pre-drilling (wood-dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque. Ground serrations T-STAR plus Surface finishes Blue zinc plated Nickel plated A2J E1J Stainless steel A2/

80 SPAX THE UNIVERSAL SCREW Raised countersunk head T-STAR plus 13 DoP 1 SKH CPD-I ETA-12/0114 Raised countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø d1 Blue zinc plated A2J 3.0 * Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10,000 1,120, ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , , , , , , , Master carton You will find this screw also in the STAINLESS STEEL section see page 140

81 13 DoP 1 SKH CPD-I ETA-12/0114 Raised countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø d1 Blue zinc plated A2J 4.5 Master carton Standard package ,000 10, , = , , mm , , , , , , , , , , = ,000 64, mm ,000 64, ,000 64,

82 SPAX THE UNIVERSAL SCREW Raised countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Raised countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø d1 Blue zinc plated A2J 3.0 * Standard package ,000 10,000 1,120, = ,000 10,000 1,120, mm ,000 10,000 1,120, ,000 10,000 1,120, ,000 10,000 1,120, ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10,000 1,120, ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , , , , , , , cross recess, type Z Master carton

83 13 DoP 1 SKH CPD-I ETA-12/0114 Raised countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø d1 Blue zinc plated A2J 4.5 cross recess, type Z Master carton Standard package ,000 10, , = , , mm , , , , , , , , , , = ,000 64, mm ,000 64,

84 SPAX THE UNIVERSAL SCREW Raised countersunk head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Raised countersunk head, cross recess, type Z 4CUT, MULTI Head, case hardened, slide-coated LgV 90 Ø d1 Nickel plated E1J 3.0 * Standard package ,000 10,000 1,120, = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , ,000 10, , = ,000 10, , mm ,000 10, , ,000 10, , ,000 10, , , , , , , , ,000 10, , , , = , , mm , , , , ,000 64, ,000 64, = ,000 64, mm ,000 64, cross recess, type Z Master carton

85 84 85

86 Product test acc. to TN-Standard A75-S018 SPAX THE UNIVERSAL SCREW Flange head Cross recess, type Z TÜV NORD CERT GmbH Made in Germany The SPAX tip

87 Flange head Cross recess, type Z flange head screws flange head The advantages 4CUT no pre-drilling (wood-dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque. Ground serrations Surface finishes Blue zinc plated A2J 86 87

88 SPAX THE UNIVERSAL SCREW Flange head Cross recess, type Z 13 DoP 1 SKH CPD-I ETA-12/0114 Flange head, cross recess, type Z 4CUT, case hardened, slide-coated LgV Ø d1 Blue zinc plated A2J 3.5 cross recess, type Z Master carton Standard package , , = , , mm , , , , , , , , , , = , , mm , , , , , , , , , , , , , , = , , mm , , , , , , , , , , , , = , , mm , , , , , , , , ,

89 88 89

90 FOR WOOD CONSTRUCTION Flat countersunk head Partial thread Full thread zinc yellow passivated Partial thread zinc yellow passivated Washer head Partial / Full thread Partial thread zinc yellow passivated Cylindric head Full thread SPAX Threaded rod Screw-sleeve Screwing aid

91 90 91

92 Product test acc. to TN-Standard A75-S018 FOR WOOD CONSTRUCTION Flat countersunk 8 mm Partial thread TÜV NORD CERT GmbH Made in Germany The SPAX tip WIROX the new anti-corrosion car-port. projects with WIROX.

93 13 DoP CPD-I ETA-12/0114 Flat countersunk head 8 mm T-STAR plus The advantages 4CUT MULTI Head Countersinks the screw head flush into the wood and acts as a break Ground serrations Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated SPAX for wood construction T-STAR plus overhead. 4CUT Approved by German and European building authorities P3J The surface with extremely high protection against corrosion SPAX-No. EAN code Thread Ø d1 total partial thread T SPAX Master carton , , = , , , , , , , , , , , , , , , ,

94 Product test acc. to TN-Standard A75-S018 FOR WOOD CONSTRUCTION Diameter 8, 10 and 12 mm TÜV NORD CERT GmbH Made in Germany The SPAX tip SPAX total thread CUT point and T-STAR plus easier.

95 A 8 / 10 / 12 mm Flat countersunk head full thread between 160 mm and 800 mm A Lateral pressure reinforcement B C B Lateral tension reinforcements conforming to DIN 1052: C Flexibly connected bending beams renovation. The features. threaded screws.. authorities under Z and ETA-12/ Surface finishes Zinc yellow passivated A2L 94 95

96 FOR WOOD CONSTRUCTION Diameter 8, 10 and 12 mm 13 DoP CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus MULTI Head and CUT point, case hardened, slide-coated LgV 90 Ø d1 Zinc yellow passivated A2L The SPAX for added lateral compression stability, elastically connected beams and added lateral tension stability. CUT point the wood. threaded screws. Ground serrations Building authorities approval as wood connector. Cost-effective alternative to or SPAX-No. EAN code Thread Ø d1 total thread T SPAX Master carton Thread , close , = 200 to , head , , , , , , , , , , ,

97 13 DoP CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus With milled ribs and CUT point, case hardened, slide-coated LgV 90 Ø d1 Zinc yellow passivated A2L SPAX-No. EAN code Thread Ø d total thread T SPAX Master carton 200 Thread , close , = 240 to , head , , , , , , , , , , , = , , , , , , , , , 12 mm flat countersunk head full thread also available in stainless steel see page

98 Product test acc. to TN-Standard A75-S018 FOR WOOD CONSTRUCTION Diameter 8, 10 and 12 mm Flat countersunk head partial thread The SPAX tip even exceeds Deutsches Institut für Bautechnik (German Institute for Civil Engineering). SPAX have received patents, such as the T-STAR plus and 4CUT TÜV NORD CERT GmbH Made in Germany

99 Declaration of conformity and licence by the German building authorities. Flat countersunk head partial thread between 80 mm and 600 mm Features: A Z , Z and ETA-12/0114 The features 4CUT T-STAR plus T40 and T-STAR plus T50 A Wall connection, wood frame Ground serrations construction 4CUT MULTI Head Countersinks the screw head flush into the wood and acts as a break T-STAR plus Surface finishes Zinc yellow passivated A2L 98 99

100 FOR WOOD CONSTRUCTION Diameter 8, 10 and 12 mm Flat countersunk head partial thread 13 DoP CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, case hardened, slide-coated LgT 90 Ø d1 Zinc yellow passivated A2L SPAX-No. EAN code Thread Ø d1 total partial thread T SPAX Master carton , , = , , , , , , , , , , , , , , , , , , = , , , , , , , , , , , , , , , ,

101 13 DoP CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus With milled ribs, case hardened, slide-coated LgT 90 Ø d1 Zinc yellow passivated A2L SPAX-No. EAN code Thread Ø SPAX Master d1 total partial carton thread T , , = , , , , , , , , , , , , ,

102 Product test acc. to TN-Standard A75-S018 FOR WOOD CONSTRUCTION Washer head 6 and 8 mm The SPAX tip SPAX WIROX washer head TÜV NORD CERT GmbH Made in Germany

103 13 DoP CPD-I ETA-12/0114 The perfect screw for wood and staircase construction Advantages of a washer head compared to a countersunk head: warped boards. Further advantage: Also narrow and thin wood cross-sections Washer head, T-STAR plus 4CUT, case hardened, slide-coated The advantages 4CUT Ground serrations T-STAR plus 4CUT Approved by German and European building authorities P3J The surface with extremely high protection against corrosion SPAX-No. EAN code Thread Ø d1 total thread T SPAX Master carton ,000 56, ,000 28, = ,000 32, ,000 28, ,000 28, ,000 28, ,000 28, T-STAR plus, T-STAR plus, partial thread

104 FOR WOOD CONSTRUCTION Washer head 8 mm 13 DoP CPD-I ETA-12/0114 Washer head, T-STAR plus 4CUT, case hardened, slide-coated Lg Ø d1 P3J SPAX-No. EAN code Thread Ø d1 total thread T SPAX Master carton , , = , , , , , , , , , , , , , , , , T-STAR plus, T-STAR plus, partial thread 8 mm washer head also available in stainless steel see page 148

105 13 DoP CPD-I ETA-12/0114 Washer head, T-STAR plus 4CUT, case hardened, slide-coated LgV Ø d1 P5J C4 The new SPAX for timber constructions. For fixing fittings and connectors (e.g. shutter and door hinges). For building and construction with timber. 4CUT Ground serrations Washer head advance. place. T-STAR plus T40. Corrosion protection C4 SPAX-No. EAN code Thread Ø d1 total T SPAX Master carton , =

106 Product test acc. to TN-Standard A75-S018 FOR WOOD CONSTRUCTION Diameter 8 and 10 mm The SPAX tip structures. the DIBt (German Institute for Civil Engineering) in Berlin. SPAX TÜV NORD CERT GmbH Made in Germany

107 Washer head partial thread between 80 mm and 450 mm A Rafter connection, purlin A B B Z approved by building authorities for fastening rooftop insulation systems distances Static calculation service The features washer head Z and ETA-12/0114. T-STAR plus Surface finishes Zinc yellow passivated A2L

108 FOR WOOD CONSTRUCTION Diameter 8 and 10 mm 13 DoP CPD-I ETA-12/0114 Washer head, T-STAR plus 4CUT, case hardened, slide-coated Lg Ø d1 Zinc yellow passivated A2L SPAX for timber construction. 4CUT SPAX-No. EAN code Thread Ø d1 total thread T Ground serrations 4CUT Washer head distances. SPAX Master carton , , = , , , , , , , , , , , , , , , , T-STAR plus overhead. Approved by German and European building authorities T-STAR plus, T-STAR plus, partial thread 8 mm washer head also available in stainless steel see page 148

109 13 DoP CPD-I ETA-12/0114 Washer head, T-STAR plus Case hardened, slide-coated Lg Ø d1 Zinc yellow passivated A2L SPAX-No. EAN code Thread Ø d1 total thread T SPAX Master carton , , = , , , , , , , , , , , , , , , , T-STAR plus, T-STAR plus, partial thread

110 Product test acc. to TN-Standard A75-S018 FOR WOOD CONSTRUCTION Cylindric head 6 and 8 mm Full thread The SPAX tip User benefits: Also narrow and thin wood cross-sections can be bolted with TÜV NORD CERT GmbH Made in Germany

111 The ideal screw for the application areas of woodglass facades and timber construction. Fields of application: Timber-glass facades: Timber construction: The advantages 4CUT and CUT point. Ground serrations T-STAR plus Cylindric head can be easily countersunk in wood. Surface finishes P3J

112 FOR WOOD CONSTRUCTION Cylindric head 6 and 8 mm Full thread 13 DoP CPD-I ETA-12/0114 Cylindric head, T-STAR plus 4CUT, case hardened, slide-coated LgV Ø d1 P3J The ideal screw for the application areas of woodglass facades and timber construction. 4CUT Ground serrations T-STAR plus overhead. Cylindric head can be easily countersunk in wood. SPAX-No. EAN code Thread Ø d1 total T SPAX Master carton Thread ,000 56, close ,000 32, = 120 to ,000 28, head ,000 28, ,000 28, ,000 28, ,000 24,

113 13 DoP CPD-I ETA-12/0114 Cylindric head, T-STAR plus With CUT point, case hardened, slide-coated LgV Ø d1 P3J The SPAX for added lateral compression stability, elastically connected beams and added lateral tension stability. CUT point T-STAR plus overhead. SPAX typical ground serrations Cylindric head can be easily countersunk in wood. SPAX-No. EAN code Thread Ø d1 total T SPAX Master carton Thread , close , = 240 to , head , , , , , ,

114 Product test acc. to TN-Standard A75-S018 FOR WOOD CONSTRUCTION SPAX-threaded rod TÜV NORD CERT GmbH Made in Germany The SPAX tip SPAX threaded rods

115 SPAX - threaded rod approved by German and European building authorities under Z and ETA-12/0114 Fields of application available. Possible to work overhead. What must be observed during processing: advance. Sales unit 25 pieces, bundled. The advantages Z and ETA-12/0114. Galvanised and additional Surface finishes Blue zinc plated A2J

116 FOR WOOD CONSTRUCTION SPAX-threaded rod 13 DoP CPD-I ETA-12/0114 SPAX-threaded rod With hex head and shaft ring, synthetic coating LgV Ø d1 Blue zinc plated A2J SPAX-No. EAN code Thread Ø d1 total thread across flats Thread ,000 close = 1,200 to ,400 head , , , , * Dimensions 16 x 1,400 to 16 x 2,200 on special pallets ** Additional lengths on request SPAX-threaded rod Without head, synthetic coating Pallet Ø d1 Blue zinc plated A2J SPAX-No. EAN code Thread Ø d1 total , ** Additional lengths on request For pre-drilling, the following drills having a diameter of 12 to 13 mm are recommendable: Pallet What must be observed during processing: in advance.

117 Screw-sleeve for SPAX-threaded rod For threaded rods without head, SPAX-No. EAN code Screwing aid for rooftop insulation Practical screwing aid for rooftop insulation. SPAX-No. EAN code New SPAX-No

118 SPECIALS INDOOR SPECIALS SPAX-M SPAX SPAX SPAX Collated screws Coil

119

120 Product test acc. to TN-Standard A75-S018 SPECIALS SPAX-M TÜV NORD CERT GmbH Made in Germany The SPAX tip SPAX-M SPAX-M

121 Secure connection of MDF boards For special application on MDF boards and other thin-walled boards made of derived wood products. CUT point SPAX typical ground serrations boards and thin chipboard to be The slender head with the ribbed underside countersinks easily Flat countersunk head, T-STAR plus With small 75 milling head, CUT point, case hardened, slide-coated Blue zinc plated A2J SPAX-No. EAN code Thread Ø d1 total partial thread T SPAX Master carton , , = , , , , , , , , = , , ,000 63, , , = ,000 64,

122 Product test acc. to TN-Standard A75-S018 SPECIALS SPAX The SPAX tip SPAX 4CUT also prevents TÜV NORD CERT GmbH Made in Germany

123 13 DoP CPD-I ETA-12/0114 The ideal screw for laying solid-wood flooring boards with 4CUT in the floor construction. T-STAR plus The 4CUT LgT The features 4CUT Ground serrations Fixing thread MULTI Head 90 Ø dk Ø d1 14 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, fixing thread, case hardened, slide-coated Zinc yellow passivated A2L SPAX-No. EAN code Thread Ø d1 total partial thread T SPAX Master carton , , , , = , , ,000 64,

124 Product test acc. to TN-Standard A75-S018 SPECIALS SPAX TÜV NORD CERT GmbH Made in Germany The SPAX tip SPAX

125 13 DoP CPD-I ETA-12/0114 The ideal screw for solid wood floors SPAX CUT point The characteristic screw point ensures the SPAX particularly easy way. The features T-STAR plus Flat countersunk head, T-STAR plus With small 60 milling head, CUT point, case hardened, slide-coated Zinc yellow passivated A2L SPAX-No. EAN code Thread Ø d1 total partial thread T SPAX Master carton , , = , , , ,

126 Product test acc. to TN-Standard A75-S018 SPECIALS SPAX Collated screws Coil TÜV NORD CERT GmbH Made in Germany The SPAX tip indoor and outdoor use also overhead outside in stainless steel SPAX Driver in coil

127 Collated Screws for professionals SPAX collated in a coil for magazine screwdrivers The SPAX system bolted, the collated SPAX screws The collated SPAX screws also allow SPAX quality the first to the The SPAX Driver is supplied in a The advantages Ground serrations Z and ETA-12/0114. T-STAR plus and Also available in stainless steel. For SPAX Driver. Surface finishes Zinc yellow passivated A2L Stainless steel A2/

128 SPECIALS SPAX Collated screws Coil 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, case hardened, slide-coated, collated in a coil LgV 90 Ø dk Ø d1 Zinc yellow passivated A2L Thread Ø d1 total T SPAX per coil SPAX SPAX-No. EAN code , , = , , , = , =

129 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, case hardened, slide-coated, collated in a coil LgT 90 Ø d1 Zinc yellow passivated A2L Thread Ø d1 total partial thread T SPAX per coil SPAX SPAX-No. EAN code , , = , , , = , = =

130 SPECIALS SPAX Collated screws Coil 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, slide-coated, collated in a coil LgT 90 Ø d1 Stainless steel A2/ Thread Ø d1 total partial thread T SPAX per coil SPAX SPAX-No. EAN code =

131

132 STAINLESS STEEL OUTDOOR UNIVERSAL FLAT COUNTERSUNK HEAD T-STAR plus PAN HEAD T-STAR plus RAISED COUNTERSUNK HEAD T-STAR plus FLAT COUNTERSUNK HEAD Cross recess, type Z OUTDOOR CONSTRUCTION Flat countersunk head Full thread Washer head Full and partial thread OUTDOOR SPECIALS Facade The screw for wooden facades Decking The ideal screw for wooden decks Path and footbridge Accessories Decking The screw for posts Fence fastener set

133

134 Product test acc. to TN-Standard A75-S018 STAINLESS STEEL OUTDOOR UNIVERSAL TÜV NORD CERT GmbH Made in Germany The SPAX tip SPAX offers you the most comprehensive range of STAINLESS steel products. Just select the type and dimension of the SPAX that will work best for your project. same: SPAX fulfils all international quality and corrosion resistance regulations on an above-average level.

135 Stainless steel T-STAR plus / cross recess, type Z In the long term, galvanised protective coatings frequently do not sufficiently protect steel screws against corrosion in outdoor areas. Rust is not just ugly but also expensive. In particular, if the quality of expensive products or components deteriorates and results in consequential damage. Costly reworks and repairs become necessary. Rust can be avoided. The SPAX rust-free stainless steel offers protection against corrosion. It is particularly well suited for use outdoors, on windows and doors as well as in moist rooms. Wherever you need to make secure bolted joints: SPAX rust-free stainless steel. The SPAX universal stainless steel is also available with the following head shapes and recesses: The advantages 4CUT no pre-drilling (wood-dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque. Ground serrations for quick and secure fastening. MULTI Head flush countersinking. Countersinks the screw head flush into the wood and acts as a break on metal. T-STAR plus positive and secure fit of the BIT and better driving, e. g. when working overhead. National and International Classification for stainless steel

136 STAINLESS STEEL OUTDOOR UNIVERSAL 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, slide-coated LgV 90 Ø dk Ø d1 Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total full thread LgV 3.0 * , , , , = , , mm , , , , , , , , , , , , = , , mm , , , , , , , , , , = , , mm , , , , , , , , ,000 63, , , , , = , , mm , , , , ,000 64, ,000 63, ,000 63, * alternative design BIT size T SPAX BOX Master carton Pallet qty

137 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, slide-coated LgV 90 Ø d1 Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total full thread LgV BIT size T SPAX BOX Master carton , , , , = , , mm , , ,000 64, ,000 63, ,000 32, ,000 32, ,000 64, ,000 32, = ,000 32, mm ,000 32, ,000 32, Pallet qty

138 STAINLESS STEEL OUTDOOR UNIVERSAL 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, T-STAR plus 4CUT, MULTI Head, slide-coated LgT 90 Ø d1 Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total partial thread LgT BIT size T SPAX BOX Master carton , , = , , mm , , , , , , = , , mm , , , , , , , , = ,000 64, mm ,000 63, ,000 63, , , , , = ,000 64, mm ,000 63, ,000 32, ,000 32, ,000 32, ,000 32, ,000 32, ,000 32, ,000 32, = ,000 32, mm ,000 32, ,000 32, ,000 32, ,000 32, ,000 32, Pallet qty

139 13 DoP 1 SKH CPD-I ETA-12/0114 Pan head, T-STAR plus 4CUT, slide-coated Lg Ø dk Ø d1 Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total full thread LgV 3.0 * , , = , , mm , , = , , mm , , , , = , , mm , , , , , , , , , , , , = , , mm ,000 63, * alternative design BIT size T SPAX BOX Master carton Pallet qty

140 STAINLESS STEEL OUTDOOR UNIVERSAL 13 DoP 1 SKH CPD-I ETA-12/0114 Raised countersunk head, T-STAR plus 4CUT, MULTI Head, slide-coated LgV 90 Ø dk Ø d1 Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total full thread LgV 3.0 * , , , , = , , mm , , , , , , = , , mm , , , , , , = , , mm , , , , = , , mm ,000 64, * alternative design BIT size T SPAX BOX Master carton Pallet qty

141 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, slide-coated LgV 90 Ø d1 Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total full thread LgV 3.0 * , , , , = , , mm , , , , , , , , , , , , = , , mm , , , , , , , , , , = , , mm , , , , , , , , ,000 63, , , , , = , , mm , , , , ,000 64, ,000 63, ,000 63, * alternative design BIT size cross recess, type Z SPAX BOX Master carton Pallet qty

142 STAINLESS STEEL OUTDOOR UNIVERSAL 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, slide-coated LgV 90 Ø d1 Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total full thread LgV BIT size cross recess, type Z SPAX BOX Master carton , , , , = , , mm , , ,000 64, ,000 63, ,000 32, ,000 32, ,000 64, ,000 32, = ,000 32, mm ,000 32, ,000 32, Pallet qty

143 13 DoP 1 SKH CPD-I ETA-12/0114 Flat countersunk head, cross recess, type Z 4CUT, MULTI Head, slide-coated LgT 90 Ø dk Ø d1 Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total partial thread LgT BIT size cross recess, type Z SPAX BOX Master carton ,000 32, = 9.7 mm ,000 56, = ,000 32, mm Pallet qty

144 Product test acc. to TN-Standard A75-S018 STAINLESS STEEL OUTDOOR CONSTRUCTION Flat countersunk head full thread The SPAX tip SPAX total thread screws provides the solution for the reinforcement of beams that are subject to high tensile and compressive forces. CUT point and T-STAR plus recess make screwing in significantly easier. TÜV NORD CERT GmbH Made in Germany

145 13 DoP CPD-I ETA-12/0114 Flat countersunk head for wood construction The SPAX for added lateral compression stability, elastically connected beams and added lateral tension stability. SPAX typical ground serrations for quick and secure fastening. Cost-effective alternative to: Bolt connections Formed metal sheet parts Lateral reinforcement through: glued on reinforcement panels or glued in threaded bars The features Stainless steel A4/316 for permanent corrosion protection particularly well suited for coastal areas. Absorption of high tensile and compressive forces by being fully threaded. Absorption of particularly high pulling forces compared to partial threaded screws. Wide spectrum of applications through screw lengths of up to 600 mm. Approved by German building authorities under Z Flat countersunk head, T-STAR plus With milled ribs and CUT point, slide-coated Stainless steel A4/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total full thread LgV BIT size T SPAX BOX Master carton Pallet qty Thread , close , = 220 to , mm 240 head , , , , , , , , = , mm

146 Product test acc. to TN-Standard A75-S018 STAINLESS STEEL OUTDOOR CONSTRUCTION Washer head full and partial thread The SPAX tip increasingly force us to use solar installations. SPAX provides an economical, secure and ultimate solution with its range of STAINLESS STEEL products for the assembly of solar installations. TÜV NORD CERT GmbH Made in Germany

147 13 DoP CPD-I ETA-12/0114 T-STAR plus Advantages of a washer head compared to a countersunk head: Better tightening of connections also of warped boards. Washer head guarantees higher beam supporting forces and allows savings with regard to piece numbers and working time. Easy bolting of steel parts and sheet metal to wood without prior counter boring of the bore hole. Improved gripping effect of the head when bolting thin sheet metal. The advantages 4CUT no pre-drilling (wood-dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque. Ground serrations for quick and secure fastening. T-STAR plus positive and secure fit of the BIT T30 and better driving, e. g. when working overhead. Washer head, T-STAR plus 4CUT, slide-coated Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total thread Lg BIT size T SPAX BOX Master carton Pallet qty ,000 32, ,000 28, = ,000 32, mm ,000 28, ,000 28, T-STAR plus, full thread T-STAR plus, partial thread

148 STAINLESS STEEL OUTDOOR CONSTRUCTION Washer head full and partial thread 13 DoP CPD-I ETA-12/0114 T-STAR plus Advantages of a washer head compared to a countersunk head: Better tightening of connections also of warped boards. Washer head guarantees higher beam supporting forces (75%) and allows savings with regard to piece numbers and working time. Easy bolting of steel parts and sheet metal to wood without prior counter boring of the bore hole e. g. solar installations. Improved gripping effect of the head when bolting thin sheet metal. The advantages 4CUT no pre-drilling (wood-dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque. Ground serrations for quick and secure fastening. 4CUT starting at screw lengths of 160 mm, the special moulding at the thread runout of partial thread screws significantly reduces the screwing-in torque. T-STAR plus positive and secure fit of the BIT T40 and better driving, e. g. when working overhead. Washer head, T-STAR plus 4CUT, slide-coated Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø BIT size SPAX Master Pallet qty d1 total thread BOX carton Lg T , , = , mm , , , , , , T-STAR plus, full thread T-STAR plus, partial thread

149

150 Product test acc. to TN-Standard A75-S018 STAINLESS STEEL OUTDOOR SPECIALS Facade The SPAX tip SPAX for wooden facades provides the best solution for the fastening of wooden facades and phenolic resin panels on square-shaped timber. pretensioning between the head and the thread grip, which is only effective in the lower segment of the component. TÜV NORD CERT GmbH Made in Germany

151 13 DoP 1 SKH CPD-I ETA-12/0114 The ideal screw for wooden facades Application: board and batten cladding Raised countersunk head Head diameter: 8.8 mm 9.7 mm T-STAR plus T20 Easy, strong screw fastening due to SPAX typical ground serrations. Ribs under the head ensure clean countersinking. Screwing in exactly due to especially formed CUT point. The CUT point effectively reduces splitting of the wood. No pre-drilling required (wood-dependent). Raised countersunk head with CUT point T-STAR plus, with milled ribs, slide-coated visible connection non-visible connection Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total partial thread LgT BIT size T SPAX BOX Master carton , , , , = , , mm ,000 64, ,000 63, ,000 32, ,000 32, ,000 63, ,000 32, = ,000 32, mm ,000 32, ,000 32, Pallet qty

152 Product test acc. to TN-Standard A75-S018 STAINLESS STEEL OUTDOOR SPECIALS Facade SPAX reference image with the kind permission of MetsäWood The SPAX tip SPAX is used in areas where both visible and non-visible attachment is required for the fixture of facade wood. and permanent connection of the wood parts. aesthetic appearance. TÜV NORD CERT GmbH Made in Germany

153 13 DoP 1 SKH CPD-I ETA-12/0114 The ideal screw for wooden facades non-visible connection visible connection Application example: wedge tongue and groove profile This SPAX is used in areas where both visible and non-visible attachment is required for the fixture of facade wood. 35 LgT Raised countersunk head with fixing thread Ø d1 The features 4CUT no pre-drilling (wood-dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque. Fixing thread solid and permanent connection of two wood components. Ribs under the head ensure clean countersinking. Raised countersunk head for aesthetic appearance. T-STAR plus T20. Stainless steel A2/304 also in A2/304 antique. Stainless steel A2/ CUT, T-STAR plus, countersunk head with milled ribs and reduced head (Ø 8 mm), slide-coated Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total partial thread LgT BIT size T SPAX BOX Master carton ,000 64, = ,000 63, mm ,000 32, Pallet qty Stainless steel A2/304 antique Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total partial thread LgT BIT size T SPAX BOX Master carton Pallet qty ,000 64, = ,000 63, mm

154 Product test acc. to TN-Standard A75-S018 STAINLESS STEEL OUTDOOR SPECIALS Facade TÜV NORD CERT GmbH Made in Germany The SPAX tip head can be nicely countersunk and ensures a perfect tongue and groove connection. the special CUT point effectively reduces any splitting of the timber. SPAX reference image with the kind permission of MetsäWood

155 13 DoP 1 SKH CPD-I ETA-12/0114 The ideal screw for wooden facades Application example: tongue and groove profile The ideal screw for outdoor panels and wooden facades head can be nicely countersunk and ensures a perfect tongue and groove connection. to SPAX typical ground serrations. formed CUT point. The CUT point effectively reduces splitting of the wood. non-visible connection Raised countersunk head with very small head T-STAR plus, CUT point, slide-coate Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total partial thread LgT BIT size T SPAX BOX Master carton , , = , , mm ,000 32, = 7.0 mm ,000 32, = 8.0 mm Pallet qty

156 Product test acc. to TN-Standard A75-S018 STAINLESS STEEL OUTDOOR SPECIALS Decking TÜV NORD CERT GmbH Made in Germany The SPAX tip solution for the construction of outdoor wooden decks. compared to clamps are: - Constant pressure between wood and timber thanks to the screw design. The boards will not come loose. - Quick and easy assembly. - Simple disassembly that enable certain boards to be replaced without having to remove the adjacent boards.

157 The ideal screw for wooden decks T-STAR plus with recess T25 prevents the blade from slipping and ensures an ideal distribution of force. The small cylinder head can easily be countersunk in the timber with a reduced splitting of the material, providing for an impeccable visual appearance. The fixing thread permits a safe and permanent connection of the wood parts. SPAX typical ground serrations for quick and secure fastening. CUT point effectively reduces splitting of the wood. Fast, clean work. Countersinks at a stroke. Easy fastening of screws - even with hardwood types.** Particularly suitable for coastal areas in stainless steel A4. Surface finishes Stainless steel A2/ Stainless steel A4/ Stainless steel A2/304, antique Stainless steel A4/316, antique ** Pre-drilling is recommend for hardwood. For this purpose, use the SPAX Step drill, page

158 STAINLESS STEEL OUTDOOR SPECIALS Decking 13 DoP CPD-I ETA-12/0114 Cylindric head, T-STAR plus With CUT point, fixing thread, slide-coated 3 12 LgT Ø d1 Stainless steel A2/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total partial thread LgT BIT size T SPAX BOX Master carton , , ,000 64, = ,000 63, mm ,000 32, ,000 32, Pallet qty Cylindric head, T-STAR plus With CUT point, fixing thread, slide-coated 3 12 LgT Ø d1 Stainless steel A4/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total partial thread LgT BIT size T SPAX BOX Master carton ,000 64, ,000 64, = ,000 32, mm ,000 32, ,000 32, Pallet qty

159 13 DoP CPD-I ETA-12/0114 Cylindric head, T-STAR plus With CUT point, fixing thread, slide-coated 3 12 LgT Colour deviations possible Ø d1 Stainless steel A2/ antique 40 Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total partial thread LgT BIT size T SPAX BOX Master carton ,000 64, = ,000 63, mm Pallet qty Cylindric head, T-STAR plus With CUT point, fixing thread, slide-coated 3 12 LgT Colour deviations possible Ø d1 Stainless steel A4/ antique 40 Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total partial thread LgT BIT size T SPAX BOX Master carton ,000 64, = ,000 32, mm Pallet qty

160 Product test acc. to TN-Standard A75-S018 STAINLESS STEEL OUTDOOR SPECIALS Decking, path and footbridge The SPAX tip the screw: - The small cylinder head can easily be countersunk in the timber, providing for an impeccable visual appearance. - The fixing thread guarantees a safe and permanent connection of the wood parts. - Particularly suitable for coastal areas in A4 stainless steel. TÜV NORD CERT GmbH Made in Germany

161 path and footbridge NEW! The SPAX for decks, paths and footbridges. T-STAR plus with recess T40 prevents the blade from slipping and ensures an ideal distribution of force. The small cylinder head can easily be countersunk in the timber, providing for an impeccable visual appearance. The fixing thread guarantees a safe and permanent connection of the wood parts. SPAX typical ground serrations for easier penetration of the screw. CUT point effectively reduces splitting of the wood. In hard wood pre-drilling of 6.0 mm over the entire screw length is recommended (see Figure 1 top right). Particularly suitable for coastal areas in A4 stainless steel. Step 1: Pre-drilling of 6.0 mm over the entire screw length. The wooden decking board displayed is 45 mm thick. See step drill 6 on page 165. Step 2: Fastening with SPAX-BIT T-STAR plus T LgT Result Ø d1 40 Cylindric head, T-STAR plus With CUT point, fixing thread, slide-coated Stainless steel A4/ Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total partial thread LgT BIT size T SPAX BOX Master carton Pallet qty , = 10.0 mm ETA requested

162 OUTDOOR SPECIALS Accessories Decking The SPAX tip accessories for Decking makes working easier. Everything you need for outdoor wood laying work from cover tape to wrench everything is available as an original SPAX accessory.

163 Accessories s Decking NEW! 50 kg power x kg perfect Wrench for the easy alignment of warped coverboards Positioning guide (Liner) 4 pcs. SPAX Spacers for 4 joint widths each: 4, 5, 6, 7 mm SPAX Wrench Kaiman pro SPAX-No. EAN code Sales unit 1 set in a case

164 OUTDOOR SPECIALS Accessories Decking Pads Protects the wood sub-structure from rising damp Dimensions: 100 x 100 x 8 mm 25 pieces bundled SPAX-No. EAN code Sales unit 10 x 25 pieces per outer box Tape Protects the wood sub-structure from rain Cellular rubber, strongly self-adhesive Thickness 1.0 mm Dimensions: 20 m x 80 mm on a roll SPAX-No. EAN code Sales unit 6 rolls per outer box Step drill With 2 drilling steps of 4.1 and 6.5 mm diameter Ø6.5 mm 35 mm Ø4.1 mm SPAX-No. EAN code Sales unit 5 cans Spacer Joint gauge for 4 joint widths: 4, 5, 6, 7 mm Check the deck board manufacturer s recommended spacing 12 spacers in a handy reusable plastic tub SPAX-No. EAN code Sales unit 3 x 12 pieces per outer box

165 Screw-sleeve Screw-sleeve with variable depth gauges 1/4 BIT frame holder with retaining ring (For BIT exchange are tools necessary) 2 T-STAR plus T25 INOX SPAX-No. EAN code Sales unit 1 piece in SPAX BOX Step drill 4 mm NEW! Set content 1 x hardwood drill 4 mm Ø 1 x countersink 6.5 mm Ø 1 x hex key Drill exchangable Drill adjustable in length 75 mm 41 mm Ø4 mm Ø6.5 mm Particularly suitable for SPAX decking screws in the lengths mm SPAX-No. EAN code Price [per sales unit 1 set] on request Step drill 6 mm Set content 2 x hardwood drill 6 mm Ø 1 x countersink 9.5 mm Ø 1 x hex key Ø6 mm NEW! Drill exchangable Drill adjustable in length Particularly suitable for SPAX path and footbridge (page 161) 150 mm 105 mm Ø9.5 mm SPAX-No. EAN code Price [per sales unit 1 set] on request

166 Product test acc. to TN-Standard A75-S018 STAINLESS STEEL OUTDOOR SPECIALS Post screw TÜV NORD CERT GmbH Made in Germany The SPAX tip SPAX post screw is the best option for garden fence posts. head adapts to conventional metal brackets and produces a faultless appearance. formation of rust stains. (wood-dependent) thanks to its CUT point.

167 13 DoP CPD-I ETA-12/0114 The post screw - self-tapping The post screw, suitable for many kinds of fence posts. CUT point no pre-drilling necessary (wood-dependent). SPAX typical ground serrations for quick and secure fastening. The collar under the head provides clean finish. T-STAR plus T40. Cumbersome work with conventional hexagon head screw no longer necessary. Countersunk fillister head for mounting hole 10.5 mm. Countersunk fillister head, T-STAR plus With CUT point, self-tapping Stainless steel Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total full thread LgV BIT size T SPAX BOX Master carton Pallet qty , = 14.0 mm

168 Product test acc. to TN-Standard A75-S018 STAINLESS STEEL OUTDOOR SPECIALS Fence fastener set The SPAX tip fastening brackets with oblong hole for precise clearance adjustment: sufficient for five wooden fence elements. TÜV NORD CERT GmbH Made in Germany

169 7.5 mm For fastening fence elements from wood. Fastening brackets from stainless steel with oblong hole for space adjustment. CUT point no pre-drilling necessary (wood-dependent). Packaging content: 40 pieces SPAX 7.0 x 35 mm, 20 pieces fastening brackets, 1 piece SPAX-BIT T-STAR plus T30. Sufficient for 5 fence elements. 18 mm 35 mm mm Fence fastening set With SPAX mushroom head and stainless steel brackets Stainless steel Dimensions [mm] Packaging units SPAX-No. EAN code Thread Ø d1 total full thread LgV BIT size T SPAX BOX Master carton Pallet qty [Sets pieces] = 13.5 mm

170 EXTRAS Assembly boxes T-STAR plus / Cross recess, type Z ORDER SYSTEMS The shelf system LAGERBOY The shelf on wheels Speedy BIT-PROGRAMME SPAX-BIT in SPAX CUT-CASE SPAX-BITcheck...181

171

172 EXTRAS Assembly boxes 13 DoP 1 SKH CPD-I ETA-12/0114 Assembly boxes, T-STAR plus Metal case with convenient carrying handle Zinc yellow passivated A2L 240 Flat countersunk head, T-STAR plus zinc yellow passivated 12 sizes, 1,700 pcs 3 BITs T15, T20, T30 SPAX-No.: EAN code: x 30 T x 35 T x 50 T x 60 T x 35 T x 40 T x 60 T x 80 T x 30 T x 45 T x 50 T x 90 T 30 Blue zinc plated A2J Flat countersunk head, T-STAR plus blue zinc plated 12 sizes, 1,700 pcs 3 BITs T15, T20, T30 SPAX-No.: EAN code:

173 13 DoP 1 SKH CPD-I ETA-12/0114 Assembly boxes, cross recess, type Z Metal case with convenient carrying handle Blue zinc plated A2J 240 Flat countersunk head, cross recess, type Z, blue zinc plated 17 sizes, 3,226 pcs 3 BITs Z 1, Z 2, Z 3 SPAX-No.: EAN code: x 17 Z 1 6.0x100 Z x 17 Z x 35 Z x 50 Z x 20 Z x 30 Z x 60 Z x 25 Z x 35 Z x 70 Z x 25 Z x 40 Z X 60 Z x 30 Z x 50 Z x 70 Z 3 Zinc yellow passivated A2L Z 1 Z 2 Z 3 Flat countersunk head, cross recess, type Z, zinc yellow passivated 17 sizes, 3,226 pcs 3 BITs Z 1, Z 2, Z 3 SPAX-No.: EAN code: Blue zinc plated A2J 240 Pan head, cross recess, type Z blue zinc plated 12 sizes, 3,500 pcs 2 BITs Z 1, Z 2 SPAX-No.: EAN code: x 17 Z x 25 Z x 35 Z x 40 Z x 20 Z x 30 Z x 40 Z x 45 Z x 20 Z x 30 Z x 35 Z x 50 Z

174 EXTRAS ORDER SYSTEMS The shelf system LAGERBOY Shelf unit 2 Shelf unit 3 Shelf unit 4 The SPAX tip The modular system ensures organisation and tidiness in the workshop. simple plug assembly system Figures similar to shipment see table below (purchase does not include assembly)

175 Modules The shelf system for proper organisation in the workshop Shelf unit 1 The SPAX LAGERBOY stands out for a number of useful applications. Easy assembly: By plugging the individual modules together, the unit can be quickly and very easily assembled without any great effort and additional tools. A Basic unit shelf frame B Add-on unit shelf frame C Perforated back wall, green coating D Shelf floor, smooth, green coating E Sliding tray, green coating F Shelf floor with partitioning beads, zinc plated G Shelf floor with border plate, green coating, with 8 holders, chrome plated H Drawer unit with central locking, green coating I Shelf floor (I1) with 2 space frames (I2), green coating The SPAX LAGERBOY modules Module description Scope of delivery Number [piece] New SPAX-No. Old SPAX-No. A Basic unit shelf frame B Add-on unit shelf frame C Perforated back wall, 1-piece, green coating C Perforated back wall, 2-piece, green coating D Shelf floor, 2-piece, smooth, green coating E Sliding tray, green coating F Shelf floor, 6-piece, with partitioning beads, zinc plated G Shelf floor with border plate, green coating, with 8 holders, chrome plated H Drawer unit with central locking, green coating I1 Shelf floor with 2 space frames (I2), green coating Shelf units, complete Dimensions W x H x D [mm] SPAX-No. Shelf unit x 2,100 x 380 Shelf unit 2 1,400 x 2,100 x 410 Shelf unit 3 2,085 x 2,100 x 410 Shelf unit 4 2,770 x 2,100 x

176 EXTRAS ORDER SYSTEMS The shelf on wheels Speedy With 5 variable floors and 4 wheels. NEW! - Speedy. The shelf on wheels versatile and practical for every use Shelf floor 545 mm Inner shelf floor 1000 mm 40 mm 40 mm 210 mm 1280 mm 1440 mm 300 mm Equipment is only an example and not included in the offer mm 760 mm SPAX - Speedy. Price [ per piece] on request Dimension shelf W x H x D [mm] 1,090 x 1,440 x 760 Inner dimension floor [mm] 1,000 (each) Packaging unit 1 piece per pallet SPAX-No EAN code CUT-CASE, 4CUT, T-STAR plus, Kaiman, - Speedy. Das Rollregal are registered trademarks.

177

178 BIT PROGRAMME SPAX-BIT The SPAX tip T-STAR plus enables an even better transmission of force, a longer tool life, quick insertion and an optimal fit. enables quick access to the required BIT. Minimum quantity 10 boxes = 1 CUT-CASE (1 outer box)

179 Secure fit of the BIT and better guidance e.g. when working overhead. Properties: SPAX screwdriver bits for manual screwdrivers, electric and cordless screwdrivers, drilling machines and pneumatic wrenches convince through accuracy of fit, optimal hardness values and torque transmission as well as through a long service life. SPAX-BIT-Holder and SPAX-BITs are premium tools. SPAX-BITs with T-STAR plus in the SPAX CUT-CASE. Packages containing one type each: 10 boxes for hanging display each containing 5 pieces / 50 pieces per SPAX CUT-CASE at length: 25 mm. 10 boxes for hanging display each containing 5 pieces / 50 pieces per SPAX CUT-CASE at length: 50 mm. SPAX-BITs T-STAR plus 25 mm length 1/4 Blade size T 10 T 15 T 20 T 25 T 30 T 40 For SPAX thread Ø [mm] 4.0 Decking for A for A4 5 Bits per box, sales unit 10 boxes in SPAX CUT-CASE = 50 BITs SPAX-No EAN code

180 BIT PROGRAMME SPAX-BIT SPAX-BIT T-STAR plus in SPAX CUT-CASE Minimum quantity 10 boxes = 1 SPAX CUT-CASE (1 outer box) SPAX-BITs T-STAR plus NEW! NEW! 50 mm 1/4 T 10 T 40 Blade size T 10 T 15 T 20 T 25 T 30 T 40 For SPAX thread Ø [mm] 4.0 Decking for A for A4 5 Bits per box, sales unit 10 boxes in SPAX CUT-CASE = 50 BITs SPAX-No EAN code SPAX-BIT T-STAR plus in single box, sales unit of 5 boxes strapped SPAX-BIT T-STAR plus NEW! 35 mm 1/4 T 50 Blade size T 50 For SPAX thread Ø [mm] 10.0 und piece in box, sales unit 5 boxes = 5 BITs SPAX-No EAN code

181 SPAX-BITcheck T-STAR plus SPAX-BITcheck T-STAR plus: 1x Rapidaptor BIT-Holder 50 mm 1 Rapidaptor BIT-Holder + 6 SPAX-BITs T-STAR plus length 25 mm, packing unit 10 BITcheck in a counter display Clean seating of the BIT and better guidance, for example, when working with items overhead. Better transmission of force Long life Quick threading Better seating Quicker access through colour coding SPAX-No. EAN code x T 10 1x T 20 1x T 30 1x T 15 1x T 25 1x T 40 Functionality of the Rapidaptor with permanent magnet and easy-out mechanism easy-in easy-out NEW! incl. T50 SPAX BITcheck for wood construction T-STAR plus: 6 SPAX-BITs T-STAR plus length 25 mm, 1 SPAX-BIT T-STAR plus T50 length 35 mm Packing unit 10 BITcheck in a counter display SPAX-No. EAN code SPAX BITcheck for wood construction T-STAR plus: 2x T 20 2x T 40 2x T 30 1x T

182 THE LITTLE ABC OF SCREWS Learn more about screws Recess types, head, thread and point shapes SPAXI

183

184 THE LITTLE ABC OF SCREWS LEARN MORE ABOUT SCREWS

185 Types of recess Cross recess, type H Cross recess, type Z T-STAR plus Head shapes Flat countersunk head Pan head Raised countersunk head Flange head Cilindric head Washer head Countersunk fillister head With centre drill Thread shapes Full thread Partial thread Fixing thread Point shapes 4CUT CUT point Self tapping point

186 THE LITTLE ABC OF SCREWS SPAXI The SPAX tip SPAX is produced? Visit us at SPAXI

187 International SPAX International GmbH & Co. KG ALTENLOH, BRINCK & CO - GRUPPE KÖLNER STRASSE D ENNEPETAL Germany TEL FAX info@spax.com SPAX TORNILLERIA MADRID, S.A.U. GRUPO ALTENLOH, BRINCK & CO C/PALIER, 52 POLIGONO CIUDAD DEL AUTOMOVIL E LEGANÉS (MADRID/ESPAÑA) TEL FAX madrid@spax.com SPAX SAFER BARCELONA, S.L. GRUPO ALTENLOH, BRINCK & CO C/INDUSTRIA, 12 POLIGONO INDUSTRIAL CIDESA E SAN ANDRES DE LA BARCA (BARCELONA/ESPAÑA) TEL FAX barcelona@spax.com ALTENLOH, BRINCK & CO. U.S., INC. ALTENLOH, BRINCK & CO - GROUP WILLIAMS COUNTY ROAD 12-C BRYAN, OH USA PHONE FAX usa@altenloh.com SPAX UK Ltd. ALTENLOH, BRINCK & CO - GROUP UNIT 9 CALIBRE INDUSTRIAL ESTATE LACHES CLOSE FOUR ASHES WOLVERHAMPTON WEST MIDLANDS WV10 7DZ GREAT BRITAIN TEL FAX uk@spax.com SPAX FRANCE S.A.S. GROUPE ALTENLOH, BRINCK & CO 7 RUE DE LA MARNE - ZAC DE LA COURTILLIERE SAINT THIBAULT DES VIGNES FRANCE TEL FAX france@spax.com SPAX İSTANBUL BAĞLANTI TEKNİĞİ TİCARET LTD. STİ. ALTENLOH, BRINCK & CO - GRUBU ÇINAR CADDESİ YILDIRIM SOKAK NO. 5 CEVİZLİ KARTAL/İSTANBUL/TURKIYE TEL , TEL , FAX info@spax.com.tr SPAX International GmbH & Co. KG ALTENLOH, BRINCK & CO - GROEP KÖLNER STRASSE D ENNEPETAL Germany ben.degroot@spax.com SPAX POLSKA Sp. z o.o. GRUPA ALTENLOH, BRINCK & CO UL. KRAKOWSKA WIELICZKA POLAND TEL FAX polska@spax.com SPAX ASIA LIMITED ALTENLOH, BRINCK & CO - GROUP FLAT C, 40/F. SUNG FUNG COURT HARBOUR HEIGHTS 3 FOOK YUM ROAD NORTH POINT HONG KONG TEL FAX helmut.bolinski@spax.com CARLO STECHEL & FIGLI s.r.l. VIA BRUNO BUOZZI SAN DONATO MILANESE (MI) ITALIA TEL FAX a.casano@stechel.it SPAX PACIFIC Pty. Ltd ALTENLOH, BRINCK & CO - GROUP PO BOX 1027 NORTH CAIRNS QLD 4870 AUSTRALIA PHONE: +61 (07) MOBILE: info@spaxpacific.com