ROMACON COUPLINGS AND FLANGE ADAPTORS

Size: px
Start display at page:

Download "ROMACON COUPLINGS AND FLANGE ADAPTORS"

Transcription

1 ROMACON COUPLINGS AND FLANGE ADAPTORS Couplings DN mm DN inches Range Romafit Weight kg ,8 65 2, , , , , , , , , , , ,2 Flange Adaptors Material: High quality ductile iron GGG DN mm DN inches Range Romafit FA Weight kg ,6 65 2, , , , , , , , , , , ,0 Coating: Akzo Nobel Resicoat RT 9000 R4 epoxy, providing a long term corrosion protection along with resistance to abrasion and impact. Other coatings are available on request Bolts and nuts: High grade Steel 8.8 fasteners, coated with Dacromet Grade B 500. Dacromet coating is based on zinc and aluminium flakes that are passivated throughout the entire layer providing excellent anti-corrosion characteristics. Stainless steel bolts and nuts are available on request Rubber gaskets: EPDM Grade E as per BS EN 681-1:1996. NBR gaskets are available on request. Features: Working pressures up to 16 bars Angular deflection 6 o for couplings DIN, BS and ANSI in one flange design Couplings-2003/1 1

2 Romacon Inserts Romacon inserts are designed to reinforce pipe ends by providing inside support for PE or PVC pipes when pipe couplings or flange adaptors are used for the connection of these pipes. The inserts are supplied with a wedge to overcome the tolerances in the plastic pipes Its thin wall construction will not disturb the flow characteristics of the medium. Inserts are made of stainless steel AISI 304. Available sizes: PE pipe size length PE pipe size Length PE Pipe size Length 63 x 3, x 12, x 9, x 5,8-5, x 8, x 14,8-14, x 8, x 22, x 4,5-3, x 6, x 4, x 9,5-9, x 6,8-6, x 14, x 8, x 10, x 16,6-15, x 6, x 25, x 2,7-2, x 10,7-10, x 5,4-5, x 16, x 9, x 8,2-7, x 12, x 12, x 6, x 17, x 11,9-11, x 18, x 6,6-6, x 18, x 28, x 10,0-9, x 15, x 6,3-5, x 13,4-12, x 3,7-3, x 20, x 7,4-7, x 11,4 175 Insert 2003/1

3 Romacon LP Coupling The Romacon LP coupling is designed for above ground connection of pipes in bulk transport systems or pipe mail systems. The coupling is suitable for negative pressures and pressures up to 3 bar. Couplings for higher pressures can be supplied on request. The body consists of stainless steel AISI 304. The tightening bars are made of steel 37 and are fastened by M10 bolts with hexagon socket head screws. The bolts and nuts are galvanised. Required max. torque 45 Nm. If required the coupling can be supplied with all parts made of stainless steel AISI 304 which makes the product suitable for underground applications. The locking bar is designed in such way that the nuts are locked during tightening. The installation of the coupling is very easy. Just push the coupling over the pipe ends and fasten the bolts. Disassembling the couplings is not necessary. There are no loose parts. Standard rubber quality is SBR. Other grades like NBR, EPDM, Viton or Silicone rubber are available. Available standard sizes: Pipe ND : 65 / 80/ 100/ 125/ 150/ 200/ 250 mm. Length : 100 / 150 / 200 mm. Working range : about 2 mm on the outside pipe diameter. On request, the coupling can be manufactured in any required diameter or length. LP 2003/1

4 Romacon Combi Repair Clamp Romacon stainless steel combi repair clamps are used for the permanent repair of broken and damaged pipes for water, gas and petrochemical fluids The function of the combi repair clamp is to reduce the stock that has to be carried by the water companies and to improve the availability of clamps in case of emergency repairs. Especially for larger repair clamps that are relatively seldom used, it is convenient to have the combi repair clamp available so that any required clamp with a diameter between 213 and 669 mm can be assembled from the 5 sections of the combi repair clamp. The sections are packed in a wooden box and each time that two or more sections are used, the used sections can be re-ordered to complete the box fore the next emergency. The sections, which have an increasing length, are marked A,B,C,D and E. Standard length is 400 mm Use the below mentioned table and find the right combination of clamp sections. Total clamp range Sections to be used Total clamp range Sections to be used A+B A+C B+C A+D B+D A+E C+D B+E C+E A+B+C A+B+D A+C+D A+B+E B+C+D A+C+E B+C+E A+D+E B+D+E C+D+E Remark: for higher pressures please contact your Romacon distributor A+B+C+D A+B+C+E A+B+D+E A+C+D+E B+C+D+E The pressure for which the clamp can be used varies with the number of sections, pipe diameter, medium etc. Use the following table as a guide: Nominal working pressure under ideal circumstances. PIPE OD FOR WATER FOR GAS ,5 Combi-2003/1

5 Romacon Repair Clamp Style RS-0 Romacon stainless steel repair clamps Style RS-0 are used for the permanent repair of broken and damaged pipes for water, gas and petrochemical fluids Following damages can be repaired: Pipe Broken Longitudal Damages due Misaligned Pin connection pipes cracks to hot taps pipes holes RS-0 is a one band clamp with a working range of 4 mm. In fact it is a small version of the RS-1 clamp, used for the repair of pipes for which a RS-1 is not available. The clamp is used to repair broken pipes with a ND of 1/2" up to 2. Romacon repair clamps should be used under following conditions: For PVC pipes, the width of the clamps should be 50 % longer (we prefer that you consult your Romacon distributor). The maximum allowable distance between two pipe ends should not exceed 10 mm The maximum allowable deflection is 2 N The maximum allowable offset should not exceed 3 mm When other problems occur, please do not hesitate to contact your Romacon distributor The clamps can be used for the repair of following pipe types: - Ductile Iron (DI) - Cast Iron (CI) - Steel (St.) - PE coated steel - PVC - PE (with restrictions) * * Please contact Romacon or a Romacon distributor for more information regarding the application of repair clamps on these pipe types. 1

6 Pressure ratings (for water)* Pressure ratings depend on the type of break or damage, pipe OD medium etc. In general, RS-0 clamps can resist a pressure of 20 bar. *A description of the testing conditions under which the clamps have been tested and testing methods is available on request. Please contact Romacon or your distributor for pressures on gas pipes. Material specification: Metal parts: stainless steel AISI 304 or AISI 316L. All parts have been deburred and are passivated to return the corrosion resistance after the welding process to its original state. Single band (one section). For detailed working ranges please see our pricelist. Rubber gaskets SBR / NBR / EPDM** (other rubber types on request). The rubber is tapered and has a waffle pattern. Bridge plate is vulcanised into the rubber gasket U shaped lifterbar. Bolts are PTFE (Teflon ) coated to prevent galling. FOP (Delrin ) washers to reduce friction between nut and lifterbar, which also function as a torque indicator. No loose parts that may get lost during installation. No special tools required, a simple wrench will do the job. Special tape is used to fix the rubber gasket to the stainless steel band. The tape is flexible and reinforced with glassfiber thread to resist hot and humid climatological circumstances and guarantee a long storage capability. Under most circumstances the clamps can be installed without releasing the pressure of the pipe. The clamps are packed into strong double rib cartons. For export overseas we use strong seaworthy wooden crates Romacon is certified ISO Available sizes Romacon RS-0 clamps are available from range up to including range mm. Available lengths: 75 and 150 mm. We will send you a pricelist with all available ranges and lengths on request. Available rubber gaskets** The Romacon clamps can be supplied with following types of rubber: Rubber : SBR (50 o Shore A) NBR (50 o Shore A) EPDM (50 o Shore A) Temperature : -40 N + 85 N C - 40 N N C up to 140 N C -40 N N F - 40 N N F up to 285 N F Application : potable water, mild gas, water, oil and hot water / steam and acids and alkali etc. several chemicals several chemicals Quality : ISO 4633 ISO 6447 ISO 4633 A list of specific resistances is available on request Romacon is able to supply several certified rubber qualities: Europe : EN 681 / EN 682 / EN 549 Germany : DVGW - DIN 3535 / KTW UK : BCG LC6/PS / BS 2494 type W / BS 6920 Belgium : Belgaqua-hydrocheck France : XP P **Other rubber qualities are available: for example Viton, Silicone rubber and white NBR (for the food industry). For information and prices please contact your Romacon distributor. RS0-2003/1 2

7 Romacon Repair Clamp Style RS-1 Romacon stainless steel repair clamps Style RS-1 are used for the permanent repair of broken and damaged pipes for water, gas and petrochemical fluids Following damages can be repaired: Pipe Broken Longitudal Damages due Misaligned Pin connection pipes cracks to hot taps pipes holes Romacon repair Clamps should be used under following conditions: The width of the clamp should be at least equal to the pipe OD The width of the clamp should be 150 mm greater than the length of a crack on pipes with outside diameter up to 350 mm. On larger pipes this should be at least 200 mm For PVC pipes, the width of the clamps should be 50 % longer (we prefer that you consult your Romacon distributor). The maximum allowable distance between two pipe ends should not exceed 10 mm The maximum allowable deflection is 2 N The maximum allowable offset should not exceed 3 mm When other problems occur, please do not hesitate to contact your Romacon distributor The clamps can be used for the repair of following pipe types: - Ductile Iron (DI) - Cast Iron (CI) - Steel (St.) - PE coated steel - Asbestos Cement (AC) - PVC - GRP (with restrictions) * - PE (with restrictions) * * Please contact Romacon or a Romacon distributor for more information regarding the application of repair clamps on these pipe types. 1

8 Pressure ratings (for water)* Pressure ratings depend on the type of break or damage, pipe OD medium etc. In general, RS-1 clamps for use on pipes of DN 40 up to including DN 150 can resist a pressure of 16 bar. RS-1 clamps for use on pipes of DN 175 up to including DN 300 can resist a pressure of 10 bar. *A description of the testing conditions under which the clamps have been tested and testing methods is available on request. Please contact Romacon or your distributor for pressures on gas pipes. Material specification: Metal parts: stainless steel AISI 304 or AISI 316L. All parts have been deburred and are passivated to return the corrosion resistance after the welding process to its original state. Single band (one section). For detailed working ranges please see our pricelist. Rubber gaskets SBR / NBR / EPDM** (other rubber types on request). The rubber is tapered and has a waffle pattern. Bridge plate is vulcanised into the rubber gasket U shaped lifterbar. Bolts are PTFE (Teflon ) coated to prevent galling. FOP (Delrin ) washers to reduce friction between nut and lifterbar, which also function as a torque indicator. No loose parts that may get lost during installation. No special tools required, a simple wrench will do the job. Special tape is used to fix the rubber gasket to the stainless steel band. The tape is flexible and reinforced with glassfiber thread to resist hot and humid climatological circumstances and guarantee a long storage capability. Under most circumstances the clamps can be installed without releasing the pressure of the pipe. The clamps are separately packed into strong double rib cartons. For export overseas we use strong seaworthy wooden crates Romacon is certified ISO Available sizes Romacon RS-1 clamps are available from range up to including range mm. Available lengths: 150 / 200 / 250 / 300 / 400 / 500 / 600 mm We will send you a pricelist with all available ranges and lengths on request. We are able to manufacture any range or length that you may require. Available rubber gaskets** The Romacon clamps can be supplied with following types of rubber: Rubber : SBR (50 o Shore A) NBR (50 o Shore A) EPDM (50 o Shore A) Temperature : -40 N + 85 N C - 40 N N C up to 140 N C -40 N N F - 40 N N F up to 285 N F Application : potable water, mild gas, water, oil and hot water / steam and acids and alkali etc. several chemicals several chemicals Quality : ISO 4633 ISO 6447 ISO 4633 A list of specific resistances is available on request Romacon is able to supply several certified rubber qualities: Europe : EN 681 / EN 682 / EN 549 Germany : DVGW - DIN 3535 / KTW UK : BCG LC6/PS / BS 2494 type W / BS 6920 Belgium : Belgaqua-hydrocheck France : XP P **Other rubber qualities are available: for example Viton, Silicone rubber and white NBR (for the food industry). For information and prices please contact your Romacon distributor. RS1-2003/1 2

9 Romacon Repair Clamp Style RS-2 Romacon stainless steel repair clamps Style RS-2 are used for the permanent repair of broken and damaged pipes for water, gas and petrochemical fluids Following damages can be repaired: Pipe Broken Longitudal Damages due Misaligned Pin connection pipes cracks to hot taps pipes holes Romacon repair Clamps should be used under following conditions: The width of the clamp should be at least equal to the pipe OD The width of the clamp should be 150 mm greater than the length of a crack on pipes with outside diameter up to 350 mm. On larger pipes this should be at least 200 mm For PVC pipes, the width of the clamps should be 50 % longer (we prefer that you consult your Romacon distributor). The maximum allowable distance between two pipe ends should not exceed 10 mm The maximum allowable deflection is 2 N The maximum allowable offset should not exceed 3 mm When other problems occur, please do not hesitate to contact your Romacon distributor The clamps can be used for the repair of following pipe types: - Ductile Iron (DI) - Cast Iron (CI) - Steel (St.) - PE coated steel - Asbestos Cement (AC) - PVC - GRP (with restrictions) * - PE (with restrictions) * * Please contact Romacon or a Romacon distributor for more information regarding the application of repair clamps on these pipe types. 1

10 Pressure ratings (for water)* Pressure ratings depend on the type of break or damage, pipe OD medium etc. In general, RS-2 clamps for use on pipes up to including ND 150 mm can resist a pressure of 16 bar. RS-2 clamps for use on pipes of ND 175 up to including ND 500 can resist a pressure of 10 bar. *A description of the testing conditions under which the clamps have been tested and testing methods is available on request. Please contact Romacon or your distributor for pressures on gas pipes. Material specification: Metal parts: stainless steel AISI 304 or AISI 316L. All parts have been deburred and are passivated to return the corrosion resistance after the welding process to its original state. Double band (2 sections). For detailed working ranges please see our pricelist. Rubber gaskets SBR / NBR / EPDM** (other rubber types on request). The rubber is tapered and has a waffle pattern. Bridge plate is vulcanised into the rubber gasket U shaped lifterbar. Bolts are PTFE (Teflon ) coated to prevent galling. FOP (Delrin ) washers to reduce friction between nut and lifterbar, which also function as a torque indicator. No loose parts that may get lost during installation. No special tools required, a simple wrench will do the job. Special tape is used to fix the rubber gasket to the stainless steel band. The tape is flexible and reinforced with glassfiber thread to resist hot and humid climatological circumstances and guarantee a long storage capability. Under most circumstances the clamps can be installed without releasing the pressure of the pipe. The clamps are separately packed into strong double rib cartons. For export overseas we use strong seaworthy wooden crates Romacon is certified ISO Available sizes Romacon RS-2 clamps are available from range up to including range mm. Available lengths: 200 / 250 / 300 / 400 / 500 / 600 / and 750 mm We will send you a pricelist with all available ranges and lengths on request. We are able to manufacture any range or length that you may require. Available rubber gaskets** The Romacon clamps can be supplied with following types of rubber: Rubber : SBR (50 o Shore A) NBR (50 o Shore A) EPDM (50 o Shore A) Temperature : -40 N + 85 N C - 40 N N C up to 140 N C -40 N N F - 40 N N F up to 285 N F Application : potable water, mild gas, water, oil and hot water / steam and acids and alkali etc. several chemicals several chemicals Quality : ISO 4633 ISO 6447 ISO 4633 A list of specific resistances is available on request Romacon is able to supply several certified rubber qualities: Europe : EN 681 / EN 682 / EN 549 Germany : DVGW - DIN 3535 / KTW UK : BCG LC6/PS / BS 2494 type W / BS 6920 Belgium : Belgaqua-hydrocheck France : XP P ** Other rubber qualities are available: for example Viton, Silicone rubber and white NBR (for the food industry). For information and prices please contact your Romacon distributor. RS2-2003/1 2

11 Romacon Repair Clamp Style RS-3 Romacon stainless steel repair clamps Style RS-3 are used for the permanent repair of broken and damaged pipes for water, gas and petrochemical fluids Following damages can be repaired: Pipe Broken Longitudal Damages due Misaligned Pin connection pipes cracks to hot taps pipes holes Romacon repair Clamps should be used under following conditions: The width of the clamp should be at least equal to the pipe OD The width of the clamp should be 150 mm greater than the length of a crack on pipes with outside diameter up to 350 mm. On larger pipes this should be at least 200 mm For PVC pipes, the width of the clamps should be 50 % longer (we prefer that you consult your Romacon distributor). The maximum allowable distance between two pipe ends should not exceed 10 mm The maximum allowable deflection is 2 N The maximum allowable offset should not exceed 3 mm When other problems occur, please do not hesitate to contact your Romacon distributor The clamps can be used for the repair of following pipe types: - Ductile Iron (DI) - Cast Iron (CI) - Steel (St.) - PE coated steel - Asbestos Cement (AC) - PVC - GRP (with restrictions) * - PE (with restrictions) * * Please contact Romacon or a Romacon distributor for more information regarding the application of repair clamps on these pipe types. 1

12 Pressure ratings (for water)* Pressure ratings depend on the type of break, pipe OD medium etc. In general, RS-3 clamps with a range up to including mm can resist a pressure of 10 bar. RS-3 clamps for use on pipes with a range of mm up to including range mm can resist a pressure of 6 bar. Please contact us for information on working pressures for larger RS-3 clamps *A description of the testing conditions under which the clamps have been tested and testing methods is available on request. Please contact Romacon or your distributor for pressures on gas pipes. Material specification: Metal parts: stainless steel AISI 304 or AISI 316L. All parts have been deburred and are passivated to return the corrosion resistance after the welding process to its original state. Triple band (3 sections). For detailed working ranges please see our pricelist. Rubber gaskets SBR / NBR / EPDM** (other rubber types on request). The rubber is tapered and has a waffle pattern. Bridge plate is vulcanised into the rubber gasket U shaped lifterbar. Bolts are PTFE (Teflon ) coated to prevent galling. FOP (Delrin ) washers to reduce friction between nut and lifterbar, which also function as a torque indicator. No loose parts that may get lost during installation. No special tools required, a simple wrench will do the job. Special tape is used to fix the rubber gasket to the stainless steel band. The tape is flexible and reinforced with glassfiber thread to resist hot and humid climatological circumstances and guarantee a long storage capability. Under most circumstances the clamps can be installed without releasing the pressure of the pipe. The clamps are separately packed into strong double rib cartons. For export overseas we use strong seaworthy wooden crates Romacon is certified ISO Available sizes Romacon RS-3 clamps are available from range up to including range mm. Available lengths: 300 / 400 / 500 / 600 / 750 mm We will send you a pricelist with all available ranges and lengths on request. We are able to manufacture any range or length that you may require. Available rubber gaskets** The Romacon clamps can be supplied with following types of rubber: Rubber : SBR (50 o Shore A) NBR (50 o Shore A) EPDM (50 o Shore A) Temperature : -40 N + 85 N C - 40 N N C up to 140 N C -40 N N F - 40 N N F up to 285 N F Application : potable water, mild gas, water, oil and hot water / steam and acids and alkali etc. several chemicals several chemicals Quality : ISO 4633 ISO 6447 ISO 4633 A list of specific resistances is available on request Romacon is able to supply several certified rubber qualities: Europe : EN 681 / EN 682 / EN 549 Germany : DVGW - DIN 3535 / KTW UK : BCG LC6/PS / BS 2494 type W / BS 6920 Belgium : Belgaqua-hydrocheck France : XP P **Other rubber qualities are available: for example Viton, Silicone rubber and white NBR (for the food industry). For information and prices please contact your Romacon distributor. RS3-2003/1 2

13 Romacon Repair Clamp Style RS-C Romacon stainless steel repair clamps Style RS-C are used for the permanent repair of damaged pipes for water, gas and petrochemical fluids Following damages can be repaired: Longitudal Damages due Pin cracks to hot taps holes The RS-C Clamp is designed for pipes with DN 50 up to and including DN 300 For larger pipe diameters and for wider ranges you can use our double band RS-CC clamp (not illustrated). This model is similar to style RS-C but has 2 bands. It can be supplied for pipe OD 88 mm RS-C clamps can be used as an economical alternative to RS-1 clamps, but only for local damages. The clamps can be used for the repair of following pipe types: - Ductile Iron (DI) - Cast Iron (CI) - Steel (St.) - PE coated steel - Asbestos Cement (AC) - PVC - GRP (with restrictions) * - PE (with restrictions) * Please contact Romacon or a Romacon distributor for more information regarding the application of repair clamps on these pipe types. Pressure ratings (for water)* Pressure ratings depend on the type of break or damage, pipe OD medium etc. In general, RS-C clamps can resist a pressure of 16 bar for sizes up to DN 150 and 10 bar for sizes larger than DN 150. *A description of the testing conditions under which the clamps have been tested and testing methods is available on request. Please contact Romacon or your distributor for pressures on gas pipes. Material specification: 1

14 Metal parts: stainless steel AISI 304 or AISI 316L. All parts have been deburred and are passivated to return the corrosion resistance after the welding process to its original state. Single band (one section). For detailed working ranges please see our pricelist. Rubber gaskets SBR / NBR / EPDM** (other rubber types on request). The rubber has a waffle pattern. U shaped lifterbar. Bolts are PTFE (Teflon ) coated to prevent galling. FOP (Delrin ) washers to reduce friction between nut and lifterbar, which also function as a torque indicator. No loose parts that may get lost during installation. No special tools required, a simple wrench will do the job. Special tape is used to fix the rubber gasket to the stainless steel band. The tape is flexible and reinforced with glassfiber thread to resist hot and humid climatological circumstances and guarantee a long storage capability. Under most circumstances the clamps can be installed without releasing the pressure of the pipe. The clamps are packed into strong double rib cartons. For export overseas we use strong seaworthy wooden crates Romacon is certified ISO Available sizes Romacon RS-C clamps are available for pipes with DN 50 up to including DN 300. Available lengths: 100, 150 mm and 200 mm. We will send you a pricelist with all available ranges and lengths on request. Available rubber gaskets** The Romacon clamps can be supplied with following types of rubber: Rubber : SBR (50 o Shore A) NBR (50 o Shore A) EPDM (50 o Shore A) Temperature : -40 N + 85 N C - 40 N N C up to 140 N C -40 N N F - 40 N N F up to 285 N F Application : potable water, mild gas, water, oil and hot water / steam and acids and alkali etc. several chemicals several chemicals Quality : ISO 4633 ISO 6447 ISO 4633 A list of specific resistances is available on request Romacon is able to supply several certified rubber qualities: Europe : EN 681 / EN 682 / EN 549 Germany : DVGW - DIN 3535 / KTW UK : BCG LC6/PS / BS 2494 type W / BS 6920 Belgium : Belgaqua-hydrocheck France : XP P **Other rubber qualities are available: for example Viton, Silicone rubber and white NBR (for the food industry). For information and prices please contact your Romacon distributor. RSC-2003/1 2

15 Romacon Snap Clamps Romacon Snap Clamps are used for the permanent repair of damaged pipes above ground for water, gas and petrochemical fluids Following damages can be repaired: Frost damage pin holes Snap Clamps provide a fast and economic repair to small damages in pipes up to ND 300. They are applied on board of ships and by plumbers for repairs above ground. The rubber partially covers the inside of the band and allows the repair of small holes caused by corrosion or frost. The clamps can be used on following pipe types: - Ductile Iron (DI) - Copper - Cast Iron (CI) - Steel (St.) - PE coated steel Pressure ratings The working pressure are as follows: Pipe OD mm 20 bar Pipe OD mm 10 bar Maximum pressure for gas pipes is 4 bar (for all POD up to incl. 229 mm) Please contact Romacon or a Romacon distributor for the exact working pressure for other sizes you may require. 1

16 Material specification Lugs: ductile iron GGG 40 acc. to Din 1693 or malleable iron GTW 40 acc. to Din 1692, surface sheradized with 15 µm zinc. Band: stainless steel acc. to AISI 304 Bolts: Special mushroom head square neck bolts. Bolt size M10 up to 2 and M12 for larger sizes. Material acc. to class 4.6, surface galvanised with 5 µm zinc. Hexagon nuts: acc. to Din 934 class 5, surface galvanised with 5 µm zinc. Washer: acc. to Din125a, surface galvanised with 5 µm zinc. Rubber (standard): waffled NBR; acc. to ISO 6447 class 50. For use on gas and water pipelines. Rubber (on request): waffled EPDM acc. to ISO 4633 for use on (hot) water lines up to 130º C and resistant to several chemicals Romacon is certified IS Available sizes Snap Clamps are available for pipes up to ND 300 and length 75, 150 and 225 mm. We will send you a pricelist with all available ranges on request. For larger ranges we can supply double band snap clamps. Available rubber gaskets The Romacon clamps can be supplied with following types of rubber: Rubber : NBR (50 o Shore A) EPDM (50 o Shore A) Temperature : - 40 N N C up to 140 N C - 40 N N F up to 285 N F Application : gas, water, oil and hot water / steam and several chemicals several chemicals Quality : ISO 6447 ISO 4633 A list of specific resistances is available on request Romacon is able to supply several certified rubber qualities: Europe : EN 681 / EN 682 / EN 549 Germany : DVGW - DIN 3535 / KTW UK : BCG LC6/PS / BS 2494 type W / BS 6920 Belgium : Belgaqua-hydrocheck France : XP P **Other rubber qualities are available: for example Viton, Silicone rubber and white NBR (for the food industry). For information and prices please contact your Romacon distributor Snap Clamps 2003/1 2

17 Split Barrel Repair Clamp Romacon Split Barrel Repair Clamps for the permanent repair of broken and damaged pipes for water, gas and petrochemical fluids The Romacon split barrel repair clamp is used for the repair of leaking couplings, broken AC couplings and high pressure pipes. With the split barrel repair clamp it is possible to repair the pipe without removing the broken coupling. The clamp is suitable for pressures up to 50 bar and on pipes with a diameter up to 1500 mm. Description and material specifications The Romacon split barrel is available in stainless steel AISI 304 /316 or mild steel 37. If manufactured from stainless steel, the split barrel will be passivated in order to return the material to its original high corrosion resistance and appearance. Protective coatings are therefore not necessary. In such case bolts and nuts will be made of stainless steel AISI 304 or 316 and the threads will be PTFE (Teflon ) coated to prevent galling. If manufactured from mild steel, the split barrel is hot dipped galvanised with a bitumen coating on the inside. It can also be supplied with an epoxy or a Nylon (Rilsan ) coating. Bolts and nuts: galvanised mild steel. On request the Romacon split barrel can be provided with taps for testing purposes Specially profiled rubber gaskets (NBR or EPDM) provide leak proof seals The axial gaskets are seated in grooves in each half of the barrel The initial radial seal is obtained by tightening the end bolts at each end of the barrel The internal pressure pushes the segmented follower ring against the gasket, resulting in adequate positive gasket pressure. No special tools or trained men are required for the assembly of a split barrel clamp The split barrel is available in almost any length Depending on the weight, larger sizes have a special hinge construction to lift the split barrel over the pipe. When ordering please state*: Type of pipe with outside diameter and minimum and maximum tolerances Maximum outside diameter of a flexible or AC coupling that is to be repaired (if required) Medium Pressure and temperature Required length of the split barrel Any special requirements such as vent and plug *If possible please supply us with u sketch or a drawing of the repair situation. Splitbarrel-2003/1 1

18 Romacon Tapping Tee Style SST (SST U type) Romacon stainless steel tapping tees style SST are used for permanent (hot) taps on several pipe types for water, gas and petrochemical fluids The SST is in fact a reinforced double band clamp with a flanged outlet. The standard working range is 10 mm, but a working range of 20 mm is available on request. The upper body is reinforced to accommodate the installation of valves and drilling equipment. Bolts can point downward (SST D type) or upward (SST U Type as in the picture). Design advantages offered by the Romacon Style SST tapping sleeve: Inventory reduction The built-in range of 10 mm allows one sleeve to fit various classes of steel, PVC, ductile iton, cast iron or asbestos-cement pipe Easy installation No specially trained personnel or tools needed. A wrench to tighten bolts is the only tool required to install the sleeve Full circumferential seal Allows you to tap size on size with confidence. No more need for heavy, hard to assemble, cast iron sleeves Material: stainless steel AISI 304 or 316 L Mild steel flanges are available from flange ND 300 Light weight The high tensile strength of stainless steel allows us to manufacture the lightest tapping sleeve in the industry... easy to handle and less load on the pipe Reinforces pipe Full circle design reduces stress on the pipe opposite of the tap Please always state whether the bolts should point upward or downward. Depending on OD and flange size the branch can be supported by an additional reinforcement Pipe and valve should always be supported according to standard codes of practice Size on size tapping sleeves require the use of an undersized shell cutter. Pease ask your distributor for more information. 1

19 The clamps can be used for (hot) taps on following pipe types: - Ductile Iron (DI) - Cast Iron (CI) - Steel (St.) - PE coated steel - Asbestos Cement (AC) - PVC (with restrictions)* - GRP (with restrictions) * - PE (with restrictions) * * Please contact Romacon or a Romacon distributor for more information regarding the application of repair clamps on these pipe types. Pressure ratings (for water)* Pressure ratings depend on the type of pipe, branch OD, medium etc. In general, SST tapping tees for use on pipes up to including ND 600 mm can resist a pressure of 16 bar. *A description of the testing conditions under which the clamps have been tested and testing methods is available on request. Please contact Romacon or your distributor for pressures on gas pipes. Material specification: Metal parts: stainless steel AISI 304 or AISI 316L. All parts have been deburred and are passivated to return the corrosion resistance after the welding process to its original state. Double band (2 sections). For detailed working ranges please see our pricelist. Rubber gaskets SBR / NBR / EPDM** (other rubber types on request). The rubber is tapered and has a waffle pattern. Stainless steel reinforced V branchring gaskets are used for all tapping tees, except for some plastic pipe sizes and certain pipe-branch connections where labyrinth gaskets are used. Bridge plate is vulcanised into the rubber gasket U shaped lifterbar. Bolts are PTFE (Teflon ) coated to prevent galling. FOP (Delrin ) washers to reduce friction between nut and lifterbar, which also function as a torque indicator. An additional stainless steel washer is used to provide extra support. No loose parts that may get lost during installation. No special tools required, a simple wrench will do the job. Special tape is used to fix the rubber gasket to the stainless steel band. The tape is flexible and reinforced with glassfiber thread to resist hot and humid climatological circumstances and guarantee a long storage capability. The SST tapping sleeve is designed for under pressure drilling (hot taps). Romacon is certified ISO Available sizes Romacon SST tapping tees clamps are available from range up to including range mm. Available lengths: 300 / 400 / 500 / 600 / and 750 mm* We will send you a pricelist with all available ranges and lengths on request. Besides our standard program, we are able to manufacture any range or length that you may require. The length of the clamp for all pipes (except plastic) should correspond to the branch DN as follows: FLANGE CLAMP TOTAL HEIGHT OF THE DN LENGTH BRANCH AND FLANGE** DN mm 80 mm DN mm 80 mm DN mm* 100 mm DN mm 100 mm DN mm 120 mm DN mm 130 mm DN mm 140 mm DN mm 165 mm DN mm 165 mm * (400 mm if POD is > 300 mm) **other heights are available on request 2

20 Flange design Flanges are drilled acc. to ISO or DIN and are flat faced. The flange thickness is 12 mm for flanges up to DN 300 and 15 mm for DN 300 and larger. Standard flanges are flat faced PN 10, but raised faced, ASA and PN 16 flanges are available on request. Available rubber gaskets** Romacon tapping tees can be supplied with following types of rubber: Rubber : SBR (50 o Shore A) NBR (50 o Shore A) EPDM (50 o Shore A) Temperature : -40 N + 85 N C - 40 N N C up to 140 N C -40 N N F - 40 N N F up to 285 N F Application : potable water, mild gas, water, oil and hot water / steam and acids and alkali etc. several chemicals several chemicals Quality : ISO 4633 ISO 6447 ISO 4633 A list of specific resistances is available on request Romacon is able to supply several certified rubber qualities: Europe : EN 681 / EN 682 / EN 549 Germany : DVGW - DIN 3535 / KTW UK : BCG LC6/PS / BS 2494 type W / BS 6920 Belgium : Belgaqua-hydrocheck France : XP P ** Other rubber qualities are available: for example Viton, Silicone rubber and white NBR (for the food industry). For information and prices please contact your Romacon distributor. NOTE: please always mention if you would like to have U or D Type SST-2003/1 3

21 Romacon Tapping Clamps Style RS-1A / RS2A / RS-CA and RS-CCA RS-1A RS-2A RS-CA RS-CCA Romacon stainless steel tapping clamps are used to make permanent (hot) taps on different pipe types for water, gas and petrochemical fluids Romacon repair clamps can be equipped with a threaded outlet up to 4. The clamp specifications are identical to the specifications of the Romacon standard repair clamps. The standard outlets are threaded according to ISO/ DIN or BSP. American CC or IP threads can be supplied upon request Size of the threaded outlet or nipple Available on pipe Ø ½ " 44mm 150 ¾ " 48 mm " 57 mm ¼ " 67 mm ½ " 70 mm " 88 mm ½ " *** 108 mm " *** 128 mm " *** 159 mm 400 Minimum width in mm *** Only available on double band clamps, with a reinforced upper scale 1

22 Available Tapping Clamps, styles and sizes : Romacon RS-1A clamps are available from range up to including range mm. Available lengths: 150 / 200 / 250 / 300 / 400 / 500 / 600 mm. Romacon RS-2A clamps are available from range up to including range mm. Available lengths: 200 / 250 / 300 / 400 / 500 / 600 / and 750 mm. Romacon RS-CA clamps are available from range up to including range mm. Available lengths: 100, 150 mm and 200 mm Romacon RS-CCA are available from range up to including range mm. Available lengths: 100, 150, 200, 250,300 and 400 mm The clamps can be used for the repair of following pipe types: - Ductile Iron (DI) - Cast Iron (CI) - Steel (St.) PE coated steel - Asbestos Cement (AC) - PVC - GRP (with restrictions) * - PE (with restrictions) * * Please contact Romacon or a Romacon distributor for more information regarding the application of repair clamps on these pipe types. Pressure ratings (for water)* Pressure ratings depend on the type of pipe, POD, medium etc. In general, tapping clamps can be applied on pipes with a maximum pressure of 16 bar for sizes up to and including DN 150 and a maximum pressure of 10 bar for larger sizes. For higher pressures, please use our Style SSS or STS saddle. *A description of the testing conditions under which the clamps have been tested and testing methods is available on request. Please contact Romacon or your distributor for pressures on gas pipes. Material specification: Metal parts: stainless steel AISI 304 or AISI 316L. Sockets and nipples are threaded according to ISO 7/ DIN or BSP. Special designed outlets are available on request. Please contact your distributor. The outlets are 100 % air tested after welding All parts have been deburred and are passivated to return the corrosion resistance after the welding process to its original state. Single band (one section) or double band (two sections). For detailed working ranges please see our pricelist. Rubber gaskets SBR / NBR / EPDM** (other rubber types on request). The rubber is tapered and has a waffle pattern. All outlets are provided with special ring gaskets. Larger sizes have a reinforced upper scale in order to avoid blow out of the gasket ring. Bridge plate (if applicable) is vulcanised into the rubber gasket U shaped lifterbar. Bolts are PTFE (Teflon ) coated to prevent galling. FOP (Delrin ) washers to reduce friction between nut and lifterbar, which also function as a torque indicator. No loose parts that may get lost during installation. No special tools required, a simple wrench will do the job. Special tape is used to fix the rubber gasket to the stainless steel band. The tape is flexible and reinforced with glassfiber thread to resist hot and humid climatological circumstances and guarantee a long storage capability. Under most circumstances the clamps can be installed without releasing the pressure of the pipe. The clamps are separately packed into strong double rib cartons. For export overseas we use strong seaworthy wooden crates Romacon is certified ISO

23 Available rubber gaskets** The Romacon clamps can be supplied with following types of rubber: Rubber : SBR (50 o Shore A) NBR (50 o Shore A) EPDM (50 o Shore A) Temperature : -40 N + 85 N C - 40 N N C up to 140 N C -40 N N F - 40 N N F up to 285 N F Application : potable water, mild gas, water, oil and hot water / steam and acids and alkali etc. several chemicals several chemicals Quality : ISO 4633 ISO 6447 ISO 4633 A list of specific resistances is available on request Romacon is able to supply several certified rubber qualities: Europe : EN 681 / EN 682 / EN 549 Germany : DVGW - DIN 3535 / KTW UK : BCG LC6/PS / BS 2494 type W / BS 6920 Belgium : Belgaqua-hydrocheck France : XP P **Other rubber qualities are available: for example Viton, Silicone rubber and white NBR (for the food industry). For information and prices please contact your Romacon distributor. We will send you a pricelist with all available ranges and lengths on request. We are able to manufacture any range or length that you may require. Tappingclamps-2003/1 3

24 Romacon Tapping Clamps Style RS-1A / RS2A / RS-CA and RS-CCA RS-1A RS-2A RS-CA RS-CCA Romacon stainless steel tapping clamps are used to make permanent (hot) taps on different pipe types for water, gas and petrochemical fluids Romacon repair clamps can be equipped with a threaded outlet up to 4. The clamp specifications are identical to the specifications of the Romacon standard repair clamps. The standard outlets are threaded according to ISO/ DIN or BSP. American CC or IP threads can be supplied upon request Size of the threaded outlet or nipple Available on pipe Ø ½ " 44mm 150 ¾ " 48 mm " 57 mm ¼ " 67 mm ½ " 70 mm " 88 mm ½ " *** 108 mm " *** 128 mm " *** 159 mm 400 Minimum width in mm *** Only available on double band clamps, with a reinforced upper scale 1

25 Available Tapping Clamps, styles and sizes : Romacon RS-1A clamps are available from range up to including range mm. Available lengths: 150 / 200 / 250 / 300 / 400 / 500 / 600 mm. Romacon RS-2A clamps are available from range up to including range mm. Available lengths: 200 / 250 / 300 / 400 / 500 / 600 / and 750 mm. Romacon RS-CA clamps are available from range up to including range mm. Available lengths: 100, 150 mm and 200 mm Romacon RS-CCA are available from range up to including range mm. Available lengths: 100, 150, 200, 250,300 and 400 mm The clamps can be used for the repair of following pipe types: - Ductile Iron (DI) - Cast Iron (CI) - Steel (St.) PE coated steel - Asbestos Cement (AC) - PVC - GRP (with restrictions) * - PE (with restrictions) * * Please contact Romacon or a Romacon distributor for more information regarding the application of repair clamps on these pipe types. Pressure ratings (for water)* Pressure ratings depend on the type of pipe, POD, medium etc. In general, tapping clamps can be applied on pipes with a maximum pressure of 16 bar for sizes up to and including DN 150 and a maximum pressure of 10 bar for larger sizes. For higher pressures, please use our Style SSS or STS saddle. *A description of the testing conditions under which the clamps have been tested and testing methods is available on request. Please contact Romacon or your distributor for pressures on gas pipes. Material specification: Metal parts: stainless steel AISI 304 or AISI 316L. Sockets and nipples are threaded according to ISO 7/ DIN or BSP. Special designed outlets are available on request. Please contact your distributor. The outlets are 100 % air tested after welding All parts have been deburred and are passivated to return the corrosion resistance after the welding process to its original state. Single band (one section) or double band (two sections). For detailed working ranges please see our pricelist. Rubber gaskets SBR / NBR / EPDM** (other rubber types on request). The rubber is tapered and has a waffle pattern. All outlets are provided with special ring gaskets. Larger sizes have a reinforced upper scale in order to avoid blow out of the gasket ring. Bridge plate (if applicable) is vulcanised into the rubber gasket U shaped lifterbar. Bolts are PTFE (Teflon ) coated to prevent galling. FOP (Delrin ) washers to reduce friction between nut and lifterbar, which also function as a torque indicator. No loose parts that may get lost during installation. No special tools required, a simple wrench will do the job. Special tape is used to fix the rubber gasket to the stainless steel band. The tape is flexible and reinforced with glassfiber thread to resist hot and humid climatological circumstances and guarantee a long storage capability. Under most circumstances the clamps can be installed without releasing the pressure of the pipe. The clamps are separately packed into strong double rib cartons. For export overseas we use strong seaworthy wooden crates Romacon is certified ISO

26 Available rubber gaskets** The Romacon clamps can be supplied with following types of rubber: Rubber : SBR (50 o Shore A) NBR (50 o Shore A) EPDM (50 o Shore A) Temperature : -40 N + 85 N C - 40 N N C up to 140 N C -40 N N F - 40 N N F up to 285 N F Application : potable water, mild gas, water, oil and hot water / steam and acids and alkali etc. several chemicals several chemicals Quality : ISO 4633 ISO 6447 ISO 4633 A list of specific resistances is available on request Romacon is able to supply several certified rubber qualities: Europe : EN 681 / EN 682 / EN 549 Germany : DVGW - DIN 3535 / KTW UK : BCG LC6/PS / BS 2494 type W / BS 6920 Belgium : Belgaqua-hydrocheck France : XP P **Other rubber qualities are available: for example Viton, Silicone rubber and white NBR (for the food industry). For information and prices please contact your Romacon distributor. We will send you a pricelist with all available ranges and lengths on request. We are able to manufacture any range or length that you may require. Tappingclamps-2003/1 3

27 Romacon Tapping Saddle Style SSS and STS SSS STS Romacon stainless steel tapping saddles are used to make permanent (hot) taps on different pipe types for water, gas and petrochemical fluids Romacon tapping saddles can be equipped with a threaded socket or nipple up to 4. The saddles can also be provided with a Flanged outlet or a plain end The standard outlets are threaded according to ISO 7 / DIN or BSP. American CC or IP threads can be supplied upon request Following table indicates the saddle width and number of straps for the various ranges and outlets DN Saddle ½ up to 1 ¼ 1 ½ and 2 2 ½ 3 4 range* Width Straps Width Straps Width Straps Width Straps Width Straps NA - NA - NA - NA NA - NA - NA NA - NA NA NA is not applicable * Other sizes are available on request Please note: in case you want to use a saddle on a plastic pipe we advise the use of a rubber layer inside the strap in order to avoid direct contact of the band with the pipe surface. Please mention this in your order The saddles can be used for making a connection to following pipe types: - Ductile Iron. (DI) - Cast Iron (CI) - Steel (St.) and PE coated steel - Asbestos Cement (AC) - PVC - GRP (with restrictions) * - PE (with restrictions) * * Please contact Romacon or a Romacon distributor for more information regarding the application of repair clamps on these pipe types. 1

28 Pressure ratings * Pressure ratings depend on the type of pipe, POD, medium etc. In general, tapping clamps can be applied on pipes with a maximum hydrostatic pressure of 16 bar. *A description of the testing conditions under which the clamps have been tested and testing methods is available on request. Please contact Romacon or your distributor for pressures on gas pipes. Material specification: Metal parts: stainless steel AISI 304 or AISI 316L. Sockets and nipples are threaded according to ISO 7/ DIN or BSP. Special designed outlets, such as Polva, are available on request. Please contact your distributor. The outlets are 100 % air tested after welding All parts have been deburred and are passivated to return the corrosion resistance after the welding process to its original state. Rubber gaskets SBR / NBR / EPDM** (other rubber types on request). The rubber is tapered and has a waffle pattern. All outlets are provided with special ring gaskets. Larger sizes have a reinforced upper scale in order to avoid blow out of the gasket ring. U shaped lifter bar. Bolts are PTFE (Teflon ) coated to prevent galling. FOP (Delrin ) washers to reduce friction between nut and lifter bar, which also function as a torque indicator. No loose parts that may get lost during installation. No special tools required, a simple wrench will do the job. Special tape is used to fix the rubber gasket to the stainless steel band. The tape is flexible and reinforced with glassfiber thread to resist hot and humid climatological circumstances and guarantee a long storage capability. Under most circumstances the clamps can be installed without releasing the pressure of the pipe. The clamps are separately packed into strong double rib cartons. For export overseas we use strong seaworthy wooden crates Typical for the SSS type of saddle is: The pad is constructed in a way that the nuts are on the same side as the tap. This enables easier installation. If required, the SSS saddle is also available with the bolts pointing downward. The straps are made of 50 mm wide heavy stainless steel. In case you want to use a saddle on a plastic pipe we advise the use of a rubber layer inside the strap in order to avoid direct contact between band and pipe surface The outlet is welded into the pad on one side. Two sided welding is available on request. Typical for the STS type of saddle is: Bolt heads instead of bolts and nuts The pad is constructed in a way that the bolt heads are on the same side as the tap. This enables easier installation. The straps are made out of 50 mm wide heavy stainless steel. In case you want to use a saddle on a plastic pipe we advise the use of a rubber layer inside the strap in order to avoid direct contact between band and pipe surface As a standard, the outlet is welded into the pad on two sides. For application on gas pipes we advise the use of STS saddles with a extra wide 90 mm strap. Romacon is certified ISO

Ford Brass Saddles Style 101B and 202B

Ford Brass Saddles Style 101B and 202B 101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,

More information

THOMAS. Ultra Saddles & Tees. Tap In Products PIPE PRODUCTS. Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps

THOMAS. Ultra Saddles & Tees. Tap In Products PIPE PRODUCTS. Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps THOMAS PIPE PRODUCTS Tap In Products Ultra Saddles & Tees Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps E1 Ultra Saddles & Tees Overview For a Permanent and Simple Tap In Solution for

More information

REPAMAX. Versatile Stainless Steel Coupling. Versatile Stainless Steel. By Krausz Wide-Range Couplings. Joins as a coupling. Repairs as a clamp.

REPAMAX. Versatile Stainless Steel Coupling. Versatile Stainless Steel. By Krausz Wide-Range Couplings. Joins as a coupling. Repairs as a clamp. JOIN REPAIR RESTRAIN REPAMAX Versatile Stainless Steel By Krausz Wide-Range Couplings Joins as a coupling. Repairs as a clamp. Versatile Stainless Steel Coupling REPAMAX Product Information Versatile Stainless

More information

Pipe Size Pipe OD TwinSeal Hinged Design for IPS PVC Pipe MODEL 3402 BRONZE SADDLE FOR COPPER TUBING

Pipe Size Pipe OD TwinSeal Hinged Design for IPS PVC Pipe MODEL 3402 BRONZE SADDLE FOR COPPER TUBING MULTIPLIER SERVICE SADDLES MODEL 3401 BRONZE SADDLE FOR IPS PVC BODY CASTINGS: Waterworks Bronze (85-5-5-5) per ASTM B584 and AWWA C800. FASTENERS: Silicon Bronze per ASTM B98. GASKET: Patented SBR TwinSeal

More information

Plast/Joint. The mechanical connection with unique one bolt system for plastic pipes d63 d315

Plast/Joint. The mechanical connection with unique one bolt system for plastic pipes d63 d315 Plast/Joint The mechanical connection with unique one bolt system for plastic pipes d63 d315 Plast/Joint >> Quick and efficient installation due to one bolt system >> Do you encounter repairs at difficult

More information

MULTI/JOINT 3000 Plus. The connection for all pipe diameters Restraint Non restraint DN50 DN400. Georg Fischer Waga N.V.

MULTI/JOINT 3000 Plus. The connection for all pipe diameters Restraint Non restraint DN50 DN400. Georg Fischer Waga N.V. MULTI/JOINT 3000 Plus The connection for all pipe diameters Restraint Non restraint DN50 DN400 Georg Fischer Waga N.V. DAS ORIGINAL EL ORIGINAL HET ORIGINEEL THE ORIGINAL MULTI/JOINT 3000 Plus >> Wide

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast

More information

THOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS

THOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally

More information

Pioneers in pipe solutions NOW. up to DN600

Pioneers in pipe solutions NOW. up to DN600 Pioneers in pipe solutions NOW Available up to DN600 Get to grips with the NEW DN600 Key Benefits Grips and seals on the most corroded pipes Increased diameter range and wide tolerance delivers a reduction

More information

Georg Fischer Waga N.V. A BIG welcome MULTI/JOINT 3000 Plus DN450 - DN600

Georg Fischer Waga N.V. A BIG welcome MULTI/JOINT 3000 Plus DN450 - DN600 Georg Fischer Waga N.V. A BIG welcome MULTI/JOINT 3000 Plus 40 - The original just got BIGGER and BETTER! The well-known and trusted wide range MULTI/JOINT 3000 Plus system has now been extended with the

More information

MaxiFit. High Tolerance Mechanical Pipe Fittings. World leaders in pipe joint, repair & flow control products

MaxiFit. High Tolerance Mechanical Pipe Fittings. World leaders in pipe joint, repair & flow control products World leaders in pipe joint, repair & flow control products The Viking Johnson range of MaxiFit universal pipe couplings represents the very latest in mechanical pipe coupling technology. MaxiFit products

More information

TAPPING & SERVICE SADDLES

TAPPING & SERVICE SADDLES TAPPING & SERVICE SADDLES The Standard of Excellence in the Industry CS12 CSC1 CS22 CSC2 CNS1 CDS1 CNS2 CDS2 CFS CFT-TO 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630)

More information

RANGER FLANGE ADAPTORS

RANGER FLANGE ADAPTORS RANGER ADAPTORS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. Because of the

More information

MaxiFit. Wide Tolerance Range Mechanical Pipe Fitting Technology. Universal. Includes. Plus. Pioneers in pipe solutions

MaxiFit. Wide Tolerance Range Mechanical Pipe Fitting Technology. Universal. Includes. Plus. Pioneers in pipe solutions Universal MaxiFit Wide Tolerance Range Mechanical Pipe Fitting Technology NOW Includes MaxiFit Plus Easier to fit Reduces installation costs Pioneers in pipe solutions MaxiFit Overview A Versatile Solution

More information

Wide-Range Coupling Solutions

Wide-Range Coupling Solutions Wide-Range Coupling Solutions HYMAX. CONNECTING THE FUTURE. A revolutionary product that set a new industry standard, the HYMAX* product line has been field-proven in millions of installations world-wide.

More information

HYMAX VERSA by Krausz Coupling and Repair Solutions

HYMAX VERSA by Krausz Coupling and Repair Solutions HYMAX VERSA by Krausz Coupling and Repair Solutions HYMAX VERSA. VERSATILE STAINLESS STEEL COUPLING. Krausz HYMAX VERSA products provide a highly versatile stainless steel coupling solution for connecting

More information

Cast Iron Valves. Product Information. It s all at Albion

Cast Iron Valves. Product Information. It s all at Albion Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171

More information

TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP

TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended

More information

Combi-Seal Flange Isolation Gaskets 4 pipes

Combi-Seal Flange Isolation Gaskets 4 pipes Combi-Seal lange Isolation Gaskets 4 pipes Pipeline Accessories lange Isolating Technology 4 pipes Isolating flange gaskets 4 pipes are especially designed for: Carbon steel Stainless steel Contact Corrosion

More information

MULTI/JOINT. One size fits and grips all End-load resistant - Flexible DN50 - DN600

MULTI/JOINT. One size fits and grips all End-load resistant - Flexible DN50 - DN600 MULTI/JOINT One size fits and grips all End-load resistant - Flexible DN50 - DN600 1 MULTI/JOINT FITTINGS large tolerance fittings It means that pipes that can be fitted may have different diameters, with

More information

Catalogue Easy inside

Catalogue Easy inside Catal ogue 2.2010 The complete product range Mini Middle Page 4: Unifix Mini: The small, light and quick repair solution for sealing holes, fractures and porous areas in water-bearing pipes. Suitable for

More information

FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR

FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR Bortek Pipe Coupling Systems info / order by mail bortek@bortek.com.tr info / order by Fax +90 / 212 876 55 26 info / order

More information

ATLANTIC PLASTICS is a company of. UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors

ATLANTIC PLASTICS is a company of. UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors ATLANTIC PLASTICS is a company of UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors The UPE MultiDiameter range of wide tolerance couplings and flange adaptors can be used for almost any

More information

APPENDIX: TECHNICAL INFORMATION

APPENDIX: TECHNICAL INFORMATION Materials Test and Operation Specifications Quality Assurance MATERIALS: Cast Iron Grey iron GD-250 GG-25 to DIN 1691-1964 Grade 220/250 minimum to BS 1452-1990 Class 35B/40B to ASTM-A48-1974 250-200 -

More information

THOMAS. Low Pressure SS Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS

THOMAS. Low Pressure SS Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Low Pressure SS Couplings Couplings for Structured Wall HDPE Pipe & Low Pressure Applications G1 COUPLINGS & FLANGE ADAPTORS - NON

More information

Bespoke. Large Diameter Fittings to Suit any Pipe Specification

Bespoke. Large Diameter Fittings to Suit any Pipe Specification Bespoke Large Diameter Fittings to Suit any Specification P I P E C O N N E C T I O N S R E PA I R F L O W C O N T R O L P R O D U C T S Large Diameter Overview Robust, Reliable, Proven Solution for New

More information

THOMAS. Unifit Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS

THOMAS. Unifit Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe H1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED BELLVILLE

More information

Polyvalve TM Black Label TM Pipe Repair Clamps

Polyvalve TM Black Label TM Pipe Repair Clamps Polyvalve TM Pipe Repair Clamps Pipe Repair Clamps - FLOWSERVE POLYVALVES S.A.S. repair clamps are flexible clamps, made out of one or several stainless steel bands with lugs. Bolts and nuts mounted on

More information

BUTTERFLY VALVE 17 SERIES Gearbox

BUTTERFLY VALVE 17 SERIES Gearbox DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

More information

Pipe Repair Products. A complete selection for all types of pipe

Pipe Repair Products. A complete selection for all types of pipe Pipe Repair Products A complete selection for all types of pipe Mueller Service Saddles Manufactured and tested in accordance with ANSI/AWWA C800 & NSF 61 certified. Mueller service saddles, available

More information

THOMAS. G-Flex Install Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS. Fully Rubber Lined Flexible Couplings

THOMAS. G-Flex Install Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS. Fully Rubber Lined Flexible Couplings THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS G-Flex Install Couplings Fully Rubber Lined Flexible Couplings E1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED VAAL DAM - Gauteng

More information

FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED HIGH DENSITY POLYETHYLENE PIPE

FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED HIGH DENSITY POLYETHYLENE PIPE Effective May 24, 2002 Cancels all previous publications U.S. Price $12.95 FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED FOR HIGH DENSITY POLYETHYLENE PIPE JCM Industries, Inc. P.O. Box 1220 Nash,

More information

TEL: Version: KW2

TEL: Version: KW2 WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to

More information

UNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings

UNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT is a company of UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT For Challenging Pipe Connections UNIJOINT, established in 1992 in the Netherlands, is a company with a vast experience in

More information

Flexible Couplings & Saddles

Flexible Couplings & Saddles Revised 6/01 Flexible Sewer couplings are the result of many years of experience with sewer pipe connections. Today's couplings are made of specially formulated elastomeric PVC with high tear and shear

More information

Concentric butterfly valves

Concentric butterfly valves Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16

More information

Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented

Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented PE-100 / PVC-U pull-out resistant long type Push-Fit Transition Coupling for PE-100 and PVC-U water pipes up to 16 bar d90

More information

Grooved Butterfly Valves

Grooved Butterfly Valves Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE 11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off

More information

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

More information

Generation. UltraGrip. Next. Optimum Wide Tolerance & Full End Restraint PIONEERS IN PIPE SOLUTIONS

Generation. UltraGrip. Next. Optimum Wide Tolerance & Full End Restraint PIONEERS IN PIPE SOLUTIONS Next Generation UltraGrip Optimum Wide Tolerance & Full End Restraint PIONEERS IN PIPE SOLUTIONS Get to grips with the NEW DN600 Key Benefits Grips and seals on the most corroded pipes Increased diameter

More information

Heavy welded steel outlet half. 3/4-inch NPT test plug. Benefits

Heavy welded steel outlet half. 3/4-inch NPT test plug. Benefits 622 Tapping Sleeve Recessed cavity for mating to lip on standard tapping valves per MSS SP60. Heavy welded steel outlet half. 3/4-inch NPT test plug. Roll resistant, self-energizing concave wedge gasket.

More information

Valves, Hydrants & Fittings. Water Valves Gate Valves / Fire Hydrants / Check Valves / Air Valves / Accessories

Valves, Hydrants & Fittings. Water Valves Gate Valves / Fire Hydrants / Check Valves / Air Valves / Accessories Valves, Hydrants & Fittings AVK Water Valves 126-134 Gate Valves / Fire Hydrants / Check Valves / Air Valves / Accessories Gas Valves 135-143 Gate Valves / Drilling Valves / Ball Valves / Accessories Water

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging

More information

series BUTTERFLY VALVE DOUBLE ECCENTRIC FLANGED FAF 3800 PRODUCTION STANDARDS DN100 DN2000 PN Design EN 593 EN ISO Flanged

series BUTTERFLY VALVE DOUBLE ECCENTRIC FLANGED FAF 3800 PRODUCTION STANDARDS DN100 DN2000 PN Design EN 593 EN ISO Flanged PRODUCTION STANDARDS DN100 DN2000 PN 10-16-25 Design EN 593 Connection End Connection EN 1092-2 ISO 7005-2 - Flanged EN 558 Series 14 DIN 3202 F4 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic

More information

INSERTA VALVE SLEEVE INSERTA VALVE ASSEMBLY. Valve insertion, simplified MATERIAL SPECIFICATIONS MATERIAL SPECIFICATIONS.

INSERTA VALVE SLEEVE INSERTA VALVE ASSEMBLY. Valve insertion, simplified MATERIAL SPECIFICATIONS MATERIAL SPECIFICATIONS. MADE IN U.S.A. Valve insertion, simplified 10-12 installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than 2 hours Much

More information

InsertaValve Sleeve. InsertaValve Valve Assembly. Valve Insertion, simplified. Material Specifications. Transmate InsertaValve

InsertaValve Sleeve. InsertaValve Valve Assembly. Valve Insertion, simplified. Material Specifications. Transmate InsertaValve Material Specifications Material Specifications Sleeve 10" - 12" installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than

More information

Advantages of Grooved Fittings

Advantages of Grooved Fittings Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows

More information

The Simple, yet advanced repair solution

The Simple, yet advanced repair solution Versatile EasiRange EasiClamp, EasiTap, EasiTee & EasiCollar A Rapid Solution for Pipe Repair & Tapping PIPE CONNECTIONS REPAIR FLOW CONTROL PRODUCTS EasiRange Overview The Simple, yet advanced repair

More information

ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED

ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED

More information

TABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44

TABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44 TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical

More information

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric

More information

General information Gate valves

General information Gate valves General information Gate valves In 1957, Hawle invented the resilient-seated gate valve with multiple O-ring sealing of the valve spindle and had it patented. Today, this type of gate valve is the standard

More information

QuickFit. Simple. Couplings & Flange Adaptors. Pioneers in pipe solutions. Close Tolerance Preassembled Fittings

QuickFit. Simple. Couplings & Flange Adaptors. Pioneers in pipe solutions. Close Tolerance Preassembled Fittings Simple QuickFit Couplings & Flange Adaptors Close Tolerance Preassembled Fittings Pioneers in pipe solutions QuickFit Overview Dedicated Couplings & Flange Adaptors The QuickFit coupling range is designed

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on

More information

contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.

contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p. contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug

More information

HYMAX GRIP Wide-Range Restraint Solutions

HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine

More information

JCM 101 Universal Clamp Couplings

JCM 101 Universal Clamp Couplings JCM 1 Universal Clamp Couplings JCM 1 Universal Clamp Coupling - Single Band JCM Universal Clamp Couplings provide a full circumferential seal and wide range for the permanent repair or reconnection of

More information

PSI Link-Seal Modular Seals

PSI Link-Seal Modular Seals 01 General Information Technical Data Selection Guide Order Submittal Sheet Installation Instruction PSI Link-Seal Modular Seals Pipeline Accessories 5 Link-Seal Modular Seals General Information Application

More information

RANGER COUPLINGS RANGER COUPLINGS

RANGER COUPLINGS RANGER COUPLINGS RANGER COUPINGS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. ecause of the

More information

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging

More information

Smith-Blair OMNI Coupling System Advantages:

Smith-Blair OMNI Coupling System Advantages: OMNI Coupling System SmithBlair s OMNI Coupling System utilizes the tremendous tensile strength of ductile iron to your best advantage. Applying the principles of space age technology to engineer the OMNI

More information

Transportation Valves

Transportation Valves Transportation Valves A Name You ve Trusted for Years... 780 Series Butterfly Valves Features: Available in sizes 3 thru 6 One handle fits sizes 3 thru 6 Integrated 180º notch plate eliminates mounting

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

JUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems

JUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems JUST PIPING, JUST FITTING A Comprehensive Integrated Solution For Piping Systems SF 01 DUCTILE IRON PIPE FITTINGS FD1011 FD1021 FD1022 FD1031 FD1102 FD1103 FD1111 FD1121 Double Flanged Piece Flanged spigot

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use

More information

Utilities Catalog. PC-U2008, February, 2008

Utilities Catalog. PC-U2008, February, 2008 Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page

More information

StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines

StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect

More information

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB

More information

Formstücke, Flanschendruckrohre. und Armaturen. Index: (click with mouse) Fittings, Flanged pipes and Valves made of Ductile Cast Iron ( GGG )

Formstücke, Flanschendruckrohre. und Armaturen. Index: (click with mouse) Fittings, Flanged pipes and Valves made of Ductile Cast Iron ( GGG ) FITTINGS AND VALVES Index: (click with mouse) Formstücke, Düker in general Flanschendruckrohre Preamble und Armaturen aus The complete duktilem product Gusseisen range ( GGG ) > Index Location plan Flag

More information

5. STRAUB-FLEX / STRAUB-REP

5. STRAUB-FLEX / STRAUB-REP 5. STRAUB-FLEX / 5.1 STRAUB-FLEX For gas and water supply, sewage treatment, industrial plants, power plants and shipbuilding: STRAUB- FLEX is the optimal pipe joint. Suitable for suction or pressure lines,

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut

More information

Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²

Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm² WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off

More information

Ford Fabricated Steel Products

Ford Fabricated Steel Products Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas

More information

Pre assembled for quick installation. One fitting is able to connect multiple pipes materials. Approvals/Standards BS EN ISO 9001

Pre assembled for quick installation. One fitting is able to connect multiple pipes materials. Approvals/Standards BS EN ISO 9001 Technical Guide WM5.1 Viking Johnson Couplers and Flange Adaptors Viking Johnson Maxi Range of universal pipe couplings represents the very latest in mechanical pipe coupling technology. Scan for more

More information

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1 SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators

More information

Talbot Pushfit Service Fittings

Talbot Pushfit Service Fittings Talbot Pushfit Service Fittings Talbot Pushfit Talbot Pushfit fittings are quick and easy to use, with no nuts to loose or leave undone. Simply push the pipe into the fitting, The grip and seal on the

More information

two pipes. two screws. two minutes 1

two pipes. two screws. two minutes 1 two pipes. two screws. two minutes 1 www.teekaycouplings.com Contents Introducing the Teekay Pipe Coupling System... 3 Mechanical and Sealing Concepts... 4 Axilock-S and Axilock... 6 Axilock-FP and Axilock-FP

More information

LATEST ARRIVALS CATALOGUE STOCK

LATEST ARRIVALS CATALOGUE STOCK LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL

More information

HELYON PRESSURE REDUCING VALVE MODEL M1

HELYON PRESSURE REDUCING VALVE MODEL M1 PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,

More information

INFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE:

INFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE: INFACT CORPORATION WATERWORKS PRODUCTS SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DATA / PRODUCT CHECKLIST EASY-TO-INSTALL SPACE-SAVING RESTRAINT

More information

The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications.

The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Butterfly Valve ParaSeal range The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Features The field replaceable seat fully

More information

Operating manual Keula gate valves DN PN10/16

Operating manual Keula gate valves DN PN10/16 Operating manual Keula gate valves DN40-400 PN10/16 Page - 1 Manufacturer: Keulahütte GmbH Geschwister-Scholl-Str. 15 02957 Krauschwitz GERMANY Manufacture and sale of the slide valves: Slide valves according

More information

THOMAS. Large Diameter Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS

THOMAS. Large Diameter Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Large Diameter Couplings Dedicated Connections For Rigid Large Diameter Pipework F1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED

More information

Universal. Wide Tolerance Range. Mechanical Pipe Fitting Technology PIONEERS IN PIPE SOLUTIONS

Universal. Wide Tolerance Range. Mechanical Pipe Fitting Technology PIONEERS IN PIPE SOLUTIONS Universal MaxiFit Wide Tolerance Range Mechanical Pipe Fitting Technology PIONEERS IN PIPE SOLUTIONS United Kingdom - Canterbury South East Water MaxiFit Couplings - DN500 Project MaxiFit Couplings were

More information

AquaGrip. Unique. Couplings & Flange Adaptors. For Polyethylene Pipe Connections

AquaGrip. Unique. Couplings & Flange Adaptors. For Polyethylene Pipe Connections Unique AquaGrip Couplings & Flange Adaptors For Polyethylene Pipe Connections PIPE CONNECTIONS, REPAIR & FLOW CONTROL PRODUCTS FOR THE UTILITIES INDUSTRY AquaGrip Overview A High Performance Polyethylene

More information

AquaGrip. Unique. Couplings & Flange Adaptors For Polyethylene Pipe Connections PIPE CONNECTIONS REPAIR FLOW CONTROL PRODUCTS

AquaGrip. Unique. Couplings & Flange Adaptors For Polyethylene Pipe Connections PIPE CONNECTIONS REPAIR FLOW CONTROL PRODUCTS Unique AquaGrip Couplings & Flange Adaptors For Polyethylene Pipe Connections PIPE CONNECTIONS REPAIR FLOW CONTROL PRODUCTS AquaGrip Overview A High Performance Polyethylene Pipe Jointing System The AquaGrip

More information

BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR

BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH

More information

Style 233-L & 234-L Rubber Joints

Style 233-L & 234-L Rubber Joints Style 33-L & 3-L Rubber Joints Style 33-L Rubber s are designed for piping systems that experience large lateral offsets due to settlement. The Style 33-L is a low profile triple arch design with a built-in

More information

STRAUB Pipe Couplings

STRAUB Pipe Couplings 2017 STRAUB Pipe Couplings PROGRESSIVE SEALING EFFECT STRAUB-GRIP PROGRESSIVE ANCHORING EFFECT Joins different pipe materials STRAUB-FLEX SIMPLE RAPID STRAUB-GRIP VIBRATION AND NOISE DAMPING Progressive

More information

Pipeline Accessories. Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes

Pipeline Accessories. Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes Pipeline Accessories Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes Flange Gaskets Type RSG 4 pipes Reg.Nr. NG-5113CQ0574 Trinkwasser KTW/W270 Product Information RSG 4 pipes Rubber-Steel-Flange-Gasket

More information

PRODUCT CATALOG TPS UNI-COUPLING. Your repair is our care

PRODUCT CATALOG TPS UNI-COUPLING. Your repair is our care PRODUCT CATALOG TPS Your repair is our care UNI-COUPLING HIGH FLEXIBILITY AND SAFETY MARGINS DETERMINE THE BASIC PRINCIPLE OF UNI-COUPLING Two types of UNI-Coupling UNI-Coupling applies one unique technical

More information

The Number One Choice of Line Stopping Contractors

The Number One Choice of Line Stopping Contractors JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

Dual Plate Check Valve

Dual Plate Check Valve Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For

More information

BUTTERFLY VALVE VF-7 Series

BUTTERFLY VALVE VF-7 Series BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm

More information

Hattersley Newman Hender Ltd

Hattersley Newman Hender Ltd Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper

More information

FK DN PVC-U Butterfly valve

FK DN PVC-U Butterfly valve .co.th FK DN 40 300 PVC-U Butterfly valve FK DN 40 300 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring

More information

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of

More information