TITGEMEYER Tb1421GB(1115)1. TIFAS LockBolt Pin and collar fastening system

Transcription

1 TITGEMEYER Tb1421GB(1115)1 TIFAS LockBolt

2 Brazier head Steel, hardened (Type 5) EN zinc, passivate Nominal pin ø Hole ø Grip range Shear Tensile Clamp Part No s L1 max L2 max d1-0.2 d2* k max * Tolerance: ø 6.4: -1.4 mm; ø 9.6: -2.0 mm The and clamp figures may be lower than those quoted, which are for guidance only. Using pins with a surface finish (zinc, clear passivate) will reduce tensile by approximately 15%. For detailed information please contact us. 2 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com Tb1421GB(1115)1

3 Brazier head Steel, hardened (Type 8) EN zinc, passivate Nominal pin ø Hole ø Grip range Shear Tensile Clamp Part No s L1 max L2 max d1-0.2 d2* k max * Tolerance: ø 4.8: -1.0 mm; ø 8.0: -1.7 mm; ø 10.0: -2.0 mm The and clamp figures may be lower than those quoted, which are for guidance only. Using pins with a surface finish (zinc, clear passivate) will reduce tensile by approximately 15%. For detailed information please contact us. Tb1421GB(1115)1 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com 3

4 Brazier head Stainless Steel EN Nominal pin ø Hole ø Grip range Shear Tensile Clamp Part No s L1 max L2 max d1-0.2 d2* k max Continued on next page 4 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com Tb1421GB(1115)1

5 Continued Nominal pin ø Hole ø Grip range Shear Tensile Clamp Part No s L1 max L2 max d1-0.2 d2* k max * Tolerance: ø 4.8: -1.0 mm; ø 6.4: -1.4 mm; ø 8.0: -1.7 mm; ø 9.6: -2.0 mm The and clamp figures may be lower than those quoted, which are for guidance only. For detailed information please contact us. Tb1421GB(1115)1 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com 5

6 Brazier head Aluminium EN AW 2024 Nominal pin ø Hole ø Grip range Shear Tensile Clamp Part No s L1 max L2 max d1-0.2 d2* k max Continued on next page 6 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com Tb1421GB(1115)1

7 Continued Nominal pin ø Hole ø Grip range Shear Tensile Clamp Part No s L1 max L2 max d1-0.2 d2* k max * Tolerance: ø 4.8: -1.0 mm; ø 6.4: -1.4 mm; ø 8.0: -1.7 mm; ø 9.6: -2.0 mm The and clamp figures may be lower than those quoted, which are for guidance only. For detailed information please contact us. Tb1421GB(1115)1 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com 7

8 Countersunk head 90 Steel, hardened (Type 5) EN zinc, passivate Nominal pin ø Hole ø Grip range Shear Tensile Clamp Part No s L1 max L2 max d1-0.2 d2* k max * Tolerance: ø 6.4: -1.0 mm; ø 9.6: -1.2 mm The and clamp figures may be lower than those quoted, which are for guidance only. Using pins with a surface finish (zinc, clear passivate) will reduce tensile by approximately 15%. For detailed information please contact us. 8 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com Tb1421GB(1115)1

9 Countersunk head 90 Steel, hardened (Type 8) EN zinc, passivate Nominal pin ø Hole ø Grip range Shear Tensile Clamp Part No s L1 max L2 max d1-0.2 d2* k max * Tolerance: ø 4.8: -1.0 mm; ø 8.0: -1.1 mm The and clamp figures may be lower than those quoted, which are for guidance only. Using pins with a surface finish (zinc, clear passivate) will reduce tensile by approximately 15%. For detailed information please contact us. Tb1421GB(1115)1 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com 9

10 Countersunk head 90 Aluminium EN AW 2024 Nominal pin ø Hole ø Grip range Shear Tensile Clamp Part No s L1 max L2 max d1-0.2 d2* k max * Tolerance: ø 4.8: -1.0 mm; ø 6.4: -1.0 mm; ø 8.0: -1.1 mm; ø 9.6: -1.2 mm; The and clamp figures may be lower than those quoted, which are for guidance only. For detailed information please contact us. 10 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com Tb1421GB(1115)1

11 Standard collars Steel EN zinc, passivate for nominal pin ø Part No. A min B max Please note: Low-profile collar = longer grip range Standard collar = grip range in accordance with tables Flange collar = shorter grip range Tb1421GB(1115)1 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com 11

12 Standard collars Stainless Steel EN for nominal pin ø Part No. A min B max Please note: Low-profile collar = longer grip range Standard collar = grip range in accordance with tables Flange collar = shorter grip range 12 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com Tb1421GB(1115)1

13 Standard collars Aluminium EN AW 6061 for nominal pin ø Part No. A min B max Please note: Low-profile collar = longer grip range Standard collar = grip range in accordance with tables Flange collar = shorter grip range Tb1421GB(1115)1 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com 13

14 Flange collars Steel EN zinc, passivate for nominal pin ø Part No. A min B max C max D * * When using flanged collars the grip range is reduced by dimension D, compared to the grip range for standard collars. Please note: Flange collar = grip range is reduced by measurement D Standard collar = grip range in accordance with tables 14 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com Tb1421GB(1115)1

15 Flange collars Stainless Steel EN for nominal pin ø Part No. A min B max C max D * * When using flanged collars the grip range is reduced by dimension D, compared to the grip range for standard collars. Please note: Flange collar = grip range is reduced by measurement D Standard collar = grip range in accordance with tables Tb1421GB(1115)1 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com 15

16 Flange collars Aluminium EN AW 6061 for nominal pin ø Part No. A min B max C max D * * When using flanged collars the grip range is reduced by dimension D, compared to the grip range for standard collars. Please note: Flange collar = grip range is reduced by measurement D Standard collar = grip range in accordance with tables 16 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com Tb1421GB(1115)1

17 Low profile collars Steel EN zinc, passivate for nominal pin ø Part No. A min B max C * * When using low-profile collars the grip range is increased by dimension C, compared to the grip range for standard collars. Please note: Low-profile collar = grip range is increased by measurement C Standard collar = grip range in accordance with tables Tb1421GB(1115)1 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ fasteners@titgemeyer.com 17

18 NOTES 18 Phone: +49 (0)5 41/ Fax: +49 (0)5 41/ Tb1421GB(1115)1

19 All rights reserved. The technical data quoted in this catalogue, performance descrip tions, recommendations and instructions e.g. for the installation of the components available from us, are without liability. These are based on our experience. Claims against us as a consequence are expressly excluded as much of the application of our goods remains outside our direct influence. It is a fundamental obligation of the user to ascertain and to decide wether the goods provided by us are appropriate for a particular application. This catalogue is our intellectual property! Disclosure to third parties is prohibited. Reproduction even in part as well as use of our illustrations and TITGEMEYER part-numbering systems is only permitted with our express permission in writing. Subject to change. Supply of goods is in conformity with our delivery and payment conditions. Gebr. TITGEMEYER GmbH & Co. KG Osnabrück

20 Gebr. Titgemeyer GmbH & Co. KG Hannoversche Straße 97 (Navigation: Hettlicher Masch 2) Osnabrück, Germany P.O. Box Osnabrück, Germany Phone: +49 (0)541/ Fax: +49 (0)541/ The technical specifications contained in this brochure are approximate and no guarantee is given as to their accuracy! Designs are subject to change. Our design proposals are non-binding! TITGEMEYER, GETO and TIFAS are trademarks, registered trademarks or product names belonging to the respective title holder.