HORIZONTAL CLAMPS Features: Specification:
|
|
- Agatha Carpenter
- 5 years ago
- Views:
Transcription
1 HORIZONTAL CLAMPS Features: Horizontal clamps are usually used where height restrictions prevent the use of a Vertical clamp, or where the action of the clamping arm and handle rotating in opposite directions is more suitable. The geometry of Brauer Horizontal clamps has been designed to ensure that the clamp opens and closes with a smooth and continuous action. The side plates have been designed so as to provide a guard against mechanism finger trapping. A comfortable, cushioned PVC handle grip is fitted to all Horizontal clamps. All Horizontal models except H700 have a closed end to the clamping arm for rigidity of construction and to retain the spindle or setscrew if it should loosen. Specification: The main components are of zinc plated and passivated steel. Rivets are of stainless steel which burnishes and work-hardens with use, the rivets of the larger clamps rotating in hardened bushes or directly in the close-toleranced holes of hardened parts. 37
2 H50 SERIES HORIZONTAL CLAMPS MODEL H50/1B through 85 through 65 Weight: Kg MODEL H50/2B MB0520 FW05/09 Flanged washers. through 85 through 65 Weight: Kg MODEL H50/2BSS MB0520 FW05/09 Flanged washers. STAINLESS STEEL through 85 o through 65 o Weight: Kg Material: BS 304 S15. Flanged washers. 38
3 MODEL H50/2C through 85 through 65 Arm: The spindle is in a fixed position. Weight: Kg MODEL H50/2BL MB0520 through 85 through 65 Base: Left hand flanged. Weight: 0.02 Kg MODEL H50/2BR MB0520 FW05/09 Flanged washers. through 85 through 65 Base: Right hand flanged. Weight: 0.02 Kg MB0520 FW05/09 Flanged washers. 39
4 H75 SERIES HORIZONTAL CLAMPS MODEL H75/1B Nominal Holding Force: 75 dan MODEL H75/1C MB0535 FW05/10 Flanged washers. NC/05 Neoprene cover. Arm: The spindle is in a fixed position. Nominal Holding Force: 75 dan MODEL H75/2B MB0535 NC/05 Neoprene cover. for front mounting use bracket Model FM1 Nominal Holding Force: 75 dan MB0535 FW05/10 Flanged washers. NC/05 Neoprene cover. 40
5 MODEL H75/2BSS Nominal Holding Force: 75 dan Material: BS 304 S15. MODEL H75/2C Flanged washers. Neoprene cover. through 90 o through 75 o STAINLESS STEEL for front mounting use bracket Model FM1 Arm: The spindle is in a fixed position. Nominal Holding Force: 75 dan MB0535 NC/Neoprene cover. H150 SERIES HORIZONTAL CLAMPS MODEL H150/1B Nominal Holding Force: 150 dan Weight: 0.25 Kg MB0650 NC/06 Neoprene cover. FW06/12 Flanged washers. 41
6 MODEL H150/1C Arm: The spindle is in a fixed position. Nominal Holding Force: 150 dan Weight: 0.25 Kg MODEL H150/2B MB0650 NC/06 Neoprene cover. for front mounting use bracket Model FM2 Nominal Holding Force: 150 dan Weight: 0.25 Kg MODEL H150/2BSS MB0650 NC/06 Neoprene cover. FW06/12 Flanged washers. STAINLESS STEEL through 90 o through 80 o Nominal Holding Force: 150 dan Material: BS 304 S15. Flanged washers. 42
7 MODEL H150/2C for front mounting use bracket Model FM2 Arm: The spindle is in a fixed position. Nominal Holding Force: 150 dan Weight: 0.25 Kg H250 SERIES HORIZONTAL CLAMPS MODEL H250/1A MB0650 NC/06 Neoprene cover. through 95 Nominal Holding Force: 250 dan Weight: 0.50 Kg MODEL H250/1B MB0860 R/08 Spindle retainer. through 95 Nominal Holding Force: 250 dan Weight: 0.50 Kg MB0860 FW08/15 Flanged washers. 43
8 MODEL H250/2A for front mounting use bracket Model FM2 through 95 Nominal Holding Force: 250 dan Weight: 0.50 Kg MODEL H250/2B MB0860 R/08 Spindle retainer. for front mounting use bracket Model FM2 through 95 Nominal Holding Force: 250 dan Weight: 0.50 Kg MB0860 FW08/15 Flanged washers. H350 SERIES HORIZONTAL CLAMPS MODEL H350/1A Nominal Holding Force: 350 dan Weight: 0.90 Kg MB1080 R/10 Spindle retainer. 44
9 MODEL H350/1B M10 x 80 Nominal Holding Force: 350 dan Weight: 0.90 Kg MODEL H350/2A MB1080 FW10/20 Flanged washers. for front mounting use bracket Model FM3 Nominal Holding Force: 350 dan Weight: 0.90 Kg MODEL H350/2B MB1080 R/10 Spindle retainer. for front mounting use bracket Model FM3 Nominal Holding Force: 350 dan Weight: 0.90 Kg MB1080 FW10/20 Flanged washers. 45
10 H450 SERIES HORIZONTAL CLAMPS MODEL H450/1A Nominal Holding Force: 450 dan Weight: 1.60 Kg MODEL H450/1B MB12100 R/12 Spindle retainer. Nominal Holding Force: 450 dan Weight: 1.60 Kg MODEL H450/2A MB12100 FW12/23 Flanged washers. for front mounting use bracket Model FM3 Nominal Holding Force: 450 dan Weight: 1.60 Kg MB12100 R/12 Spindle retainer. 46
11 MODEL H450/2B for front mounting use bracket Model FM3 Nominal Holding Force: 450 dan Weight: 1.60 Kg HEAVY DUTY HORIZONTAL CLAMP MODEL H700 MB12100 FW12/23 Flanged washers. through 95 Nominal Holding Force: 700 dan Weight: 1.15 Kg MB12100 FW12/23 Flanged washers. This heavy duty clamp features a cast steel base with central hole for optional tee bolt mounting. 47
PUSH-PULL CLAMPS. Installation: When mounting clamps ensure that the mechanism clears the mounting bracket or fixture.
Features: With the exception of model P50, which is a light duty base mounted clamp, these push-pull clamps are mounted either directly into a threaded or plain hole in a fixture, or can be mounted in
More informationMAREK Industrial a.s. ** marek.eu ** **170728
VA SERIES HEAVY DUTY VERTICAL CLAMPS Features: All VA series clamps are designed to be adaptable and durable, and to withstand abuse in heavy duty applications. The new VA300 series helps fill the gap
More informationTooling Automation Measurement CLAMPING PRODUCTS
Tooling Automation Measurement INTRODUCTION Since 1926, Brauer has been providing industry with the finest engineered products, expert technical support, on time deliveries and unparalleled customer service.
More informationPNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel
PNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel construction and have compact cylinders without tie-rods.
More informationRelease lock Models HH 300 RL FA 200 RL HH 400 RL FA 300 RL HH 500 RL FA 400 RL
Neue Modelle mit SICHERHEITSVERRIEGELUNG Release lock Models HH 300 RL FA 200 RL HH 400 RL FA 300 RL HH 500 RL FA 400 RL HH 600 RL HH 350 RL HH 450 RL HH 55 RL RL HV 200 RL Sl 310 RL HV 300 RL SL 350 RL
More informationSTRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 03-55-0129 MOTOR,S HOODS ASSY.. "STICKER INCLUDED" 1 2 03-55-0050 MUFFLEUR HOODS ASSY. 1 3 01-55-0056 ROUND TUB "STICKER INCLUDED" 1 4 NC01-65-0076
More informationFEATURES. (fig.1) (fig. 2) (fig. 3) (fig. 4)
Catalogue 1/2016 FEATURES (fig.1) (fig. 2) (fig. 3) (fig. 4) Using the toggle principle, the quick clamping tools have decisive advantages: The clamping lever is opened so as to completely clear the
More informationPARTS MANUAL. Version BURNISHER. R.P.S. Corporation Phone: P.O. Box 241 Fax: Racine, Wisconsin 53401
Version 13.0301 PARTS MANUAL 255 BURNISHER R.P.S. Corporation Phone: 1-800-450-9824 P.O. Box 241 Fax: 1-866-632-6961 Racine, Wisconsin 53401 Front Wheel Assembly...4 Wheels and Rollers...6 Rear Axle and
More informationSTRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 NC13-15-0008 RUBBER STRAP 12" LG 1 2 03-50-0070 FLEXIBLE HOSE HANDLE 1 3 NC01-65-0076 COLLAR (HAS116) 2 4 03-50-0005 GRILL (3 FINGERS) 1 5 01-33-0035
More informationSTRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 03-55-0129 MOTOR,S HOODS ASSY.. "STICKER INCLUDED" 1 2 03-55-0050 MUFFLEUR HOODS ASSY. 1 3 01-55-0056 ROUND TUB "STICKER INCLUDED" 1 4 NC01-65-0076
More informationRZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0
Parts Manual for RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0 MODEL ERZT185440BVE RZT22500BVE2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1,
More informationFM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationHeavy duty wheels and castors with cast polyurethane tread Blickle Besthane Soft
Heavy duty wheels and castors with cast polyurethane tread 236 we innovate mobility www.blickle.com Table of Contents ALBS LK LKR LU LH LS Series Page ALBS 80-300 mm 180-1150 kg 238 239 LK-ALBS 80-200
More informationForm 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
More informationModel 4070 Center Post Tire Changer
Model 4070 Center Post Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies. Parts Identification READ these instructions before placing unit in service. KEEP these
More informationSAF-T-LINER MVP-ER PARTS MANUAL. Doors Section. Page 4-1. Doors 10/96
Doors Section Doors Page 4-1 Stepwell - Outward Opening Page 4-2 Doors Stepwell - Outward Opening Item Part Num. Number Qty. Description Notes 1 47001449 1 Trim - Step, Entrance, Diamond Plate 2 47001450
More informationSHAFT MOUNT REDUCERS. For Additional Models of Shaft Mount Reducers See Sections F & J G-1
SHAFT MOUNT REDUCERS PowerTorque Features and Description... -2 Nomenclature... -4 Selection Instructions... -5 Selection By Horsepower... -7 Mechanical Ratings... -12 Dimensions... -14 Accessories...
More informationParts Manual. Model: SG1314A MANUAL NO REV. 03 (06/10/05)
Parts Manual Model: SG1314A MANUAL NO. 109276 REV. 03 (06/10/05) 2 2005 BlueBird International. All Rights Reserved. Printed Beatrice, Nebraska TABLE OF CONTENTS Stump Grinder SG1314A Deck Assembly...
More informationCast iron wheels and castors
Cast iron wheels and castors 318 we innovate mobility www.blickle.com Table of Contents G L LK LU LH LT LO LS Series Page G 80-250 mm 250-1400 kg 320 321 L-G 80-200 mm 200-350 kg LK-G 80-200 mm 250-600
More informationSpartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
More informationSpartan Mower Parts Manual RT
Spartan Mower Parts Manual RT Revision Date -- TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More informationPARTS LIST. Reproduction. Not for. Mower Decks. Mfg. No. Description EZM2042, 20HP B&S w/42" Mower Deck (2009)
PARTS LIST Mower Decks Mfg. No. Description 7800490 EZM2042, 20HP B&S w/42" Mower Deck (2009) Manual Part No. Revision A Rev. Date: 11/5/2009 Table Of Contents PRODUCT COMPONENTS PAGES Frame, Body & Seat
More informationE-2500H Bottom Housing 2-2stg Vac Motor (parallel) 500 PSI H35 or H39 ITEM No. PART No. QTY DESCRIPTION 1 FS /2" AXLE (ROD) END CAP 2 WC161094
E-2500H Bottom Housing 2-2stg Vac Motor (parallel) 500 PSI H35 or H39 ITEM No. PART No. QTY DESCRIPTION 1 FS07108 2 1/2" AXLE (ROD) END CAP 2 WC161094 2 10X1.75X1/2"NONMARKIWHEEL80CAB 3 FS05081808 1 AXLE(ROD)1/2"
More informationParts Manual. UltraBelt GD Walk Behind Mower
Parts Manual UltraBelt GD Walk Behind Mower Models: Description: UltraBelt GD, 14HP Kohler w/ 36" Mower Deck 5900027 15HP Kawasaki V-Twin w/ 36" Mower Deck (AV15) 5900030 15HP Kawasaki V-Twin w/ 48" Mower
More informationSand Trap Louvers OSTL 300 SERIES. Sand Trap Louvers
Model : OSTL GI 341 Description: OPTIMA make Sand Trap Louver is used as pre-filter for the protection of air conditioning plants in area exposed to extreme levels of industrial pollution. It has a high
More informationFIRE PROTECTION PRODUCTS
SUPER CENTURION FIRE HYDRANT Mueller Super Centurion Fire Hydrant Since its introduction in 1976, millions of Centurion fire hydrants have been installed throughout North America. There are a number of
More informationFoam Pig Selection Guide
Foam Pig Selection Guide sales@pigsunlimited.com 23802 FM 2978, Suite C1 Tomball, TX 77375 P: 281-351-2749 F: 281-351-4658 Toll-Free: 800-578-7436 Light Density Foam Pigs Light density foam pigs are constructed
More informationCR15-14 A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR15-1 A-F-A-E-HQQE 3x/69 5 HZ Grundfos pump 965193 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/965193/cr-15-1-a-f-a-e-hqqe.html
More informationSpartan Mower Parts Manual SRT
Spartan Mower Parts Manual SRT Revision Date -- TABLE OF CONTENTS SRT Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More information50 years of Reliable Field History
Coupling Comments The No Maintenance, Easy Assembly, Resilient Coupling with High Angular Misalignment up to 10 degrees Center Assembly 70 Deg. Neoprene Rubber in Compression Grade 5 Bolts Steel Flanges
More informationPVC Couplings. Brass Couplings BRASS COMPRESSION COUPLING 3 -LENGTH PVC COMPRESSION COUPLING BRASS COMPRESSION COUPLING 5 -LENGTH
& FITT Brass Couplings BRASS COMPRESSION COUPL 3 -LENGTH 46331 3/8 1/2 12 120 5.80 46332 1/2 3/4 12 120 7.38 46333 3/4 1 6 72 10.52 46334 1 1 1/4 6 60 13.44 46335 1 1/4 1 1/2 4 48 18.00 46336 1 1/2 4 36
More informationLitter Spreader. Models SP400, SP450, SP500, SP550. Illustrated Parts Breakdown
Litter Spreader Models SP00, SP0, SP00, SP0 Illustrated Parts Breakdown Page Front End Page Hydraulic System (w/ Side Mounted Reservoir) Page Hydraulic System (w/ Front Mounted Reservoir) Page Hydraulic
More informationB Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationSpartan Mower Parts Manual RT
Spartan Mower Parts Manual RT Revision Date -- TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More informationPARTS MANUAL. MB16, MB21, and MTB16 Scoot-Crete Power Buggies
PARTS MANUAL MB16, MB21, and MTB16 Scoot-Crete Power Buggies (revised June 14, 2004) 1 Part #32107-01 2 This manual is for Miller MB16, MB21 and MTB16 Buggies Table of Contents General Arrangement and
More informationTOGGLE CLAMP Catalogue 1/2015 CopertinaCatalogoSB2015_EN.indd 2 18/05/
TOGGLE CLAMP Catalogue 1/2015 FEATURES (fig.1) (fig. 2) (fig. 3) (fig. 4) Using the toggle principle, the quick clamping tools have decisive advantages: The clamping lever is opened so as to completely
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationVC Series. Volume Control Dampers M A N U F A C T U R E R S O F A I R, F I R E A N D S M O K E C O N T R O L P R O D U C T S
V41706 VC Series Volume Control Dampers Roll formed steel blades with three material options DW144 compliant Flanged models with 65mm deep mechanically fixed casings Rectangular spigotted models with 85mm
More informationSCREW JACK POWER TRANSMISSION COMPONENTS TYPICAL SYSTEM ARRANGEMENTS
TYPICAL SYSTEM ARRANGEMENTS Duff-Norton offers all of the components necessary to complete your power transmission system, whether it consists of a single actuator or a multiple actuator arrangement. We
More informationTruth Hardware (Awning Window)
Truth Hardware (Awning Window) 20-1/2" Single Pull Lever Operator Contents: 1 operator; 1 hook and 1 set of installation screws. "Y" Dimension "Y" Finish Part No. Under 2" TH-23070 Over 2" TH-23069 Under
More informationA double-wishbone type suspension is used in the front. A multi-link type suspension is used in the rear. Tread* mm (in.) 1560 (61.
CHASSIS SUSPENSION AND AXLE CH-69 SUSPENSION AND AXLE SUSPENSION 1. General A double-wishbone type suspension is used in the front. A multi-link type suspension is used in the rear. 08D0CH111Z Specifications
More informationCollection System. Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Collection System 967004601 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. 2012 All rights reserved. Swainsboro, GA. Printed in U.S.A.
More informationSCIFIT PRO2 Total Body PRO230-INT
SCIFIT PRO Total Body PRO0-INT Parts Manual //08 7:5: AM PRO0-INT - SCIFIT PRO TOTAL BODY Table of Contents Adjustable Left and Right Feet Crank Assembly... Bearing Mount Bi Directional Assembly... Bearing
More informationSpartan Mower Parts Manual SRT
Spartan Mower Parts Manual SRT Revision Date -- TABLE OF CONTENTS SRT Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More informationPipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
More informationSUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS
DN SUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION - 4x2... 6 page FRONT SUSPENSION - 4x4... 14 REAR SUSPENSION... 23 ALIGNMENT TABLE OF CONTENTS page AND OPERATION WHEEL
More informationAxion Series Zero-Turn Riders & Mower Decks
Parts Manual Axion Series Zero-Turn Riders & Mower Decks 20HP Product Mfg. No. Description 2690642 Axion, 20HP Zero Turn Rider w/42" Mower 2690715 Axion, 20HP Zero Turn Rider w/42" Mower (CE/Export) 24HP
More informationHoisting Equipment Rack & Pinion jacks
Ratchet jack model Yaletaurus 10000 Mechanical ratchet jacks with lifting claw are designed for operation in confined areas where space below the load is restricted, thus preventing the use of traditional
More informationFM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationT38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More informationParts List for The 36 & 42 Wright Stander Mower (For Serial Numbers and Higher Until Superseded)
Parts List for The & Wright Stander Mower (For Serial Numbers 00 and Higher Until Superseded) Replace with newer revisions as they become available 00 Wright Manufacturing, Inc. All rights reserved Revised:
More informationBulb Number Part Number Description KNOB
Bulb Number Part Number Description 2 11040-440 KNOB 4 12040-357 PIN, DETENT 5 12060-347 PIVOT PIN 9 16010-311 FOOT PAD 19 18010-007 HANDLE ASSEMBLY - LONG 22 18010-203 W HANDLE BAR 23 18010-204 W MOUNTING
More informationBS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
More informationALL PLANT & MIN TILL DRILL
4000 SERIES ALL PLANT & MIN TILL DRILL OWNER S MANUAL ADDENDUM OPERATION MAINTENANCE REPAIR PARTS #608869 (03-08) 2 Table of Contents Precision Planting Metering System 5-9 Precision Planting Introduction
More informationVIKING GENERAL PURPOSE PUMPS SERIES 32 AND 432
Page 310.1 FEATURES SERIES 32 and 432 3 GPM (.7 m³/hr) Size Shown. or Mechanical seal type. Valve on casing. SERIES 432 5 GPM (1 m³/hr) Mechanical seal type. Shown with valve on head. C, F & FH Sizes J
More informationDurulite Door Hardware Manual
R Durulite Door Hardware Manual World s Leading Manufacturer Of Traffic Doors Cincinnati, Ohio and Redmond, Oregon Phone: 1-800-543-4455 FAX: 1-800-245-7045 Www.chasedoors.com TABLE OF CONTENTS DESCRIPTION
More informationParts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO
More informationFord Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
More informationFlame-retardant PVC offers the protection you need.
Solid wall wiring duct Flame-retardant PVC offers the protection you need. Solid wall duct PVC Engineered to restrict wire access Constructed of flame-retardant PVC Improved flush sidewall and cover style
More informationP/N , Rev. 1.3 [05/06]
P/N 240006107, Rev. 1.3 [05/06] TABLE OF CONTENTS I Jacket and Base Assembly... 4 II Burner/Igniter Assembly... 6 III Exhaust Tee/Condensate Trap Assembly... 7 IV Boiler Block and Piping Assembly... 8
More information5 1 /4 PACER. It s AMERICAN What We Know. DARLING MARK 73 2 FIRE HYDRANT AMERICAN FLOW CONTROL WATEROUS FIRE HYDRANT
WATEROUS FIRE HYDRANT DUCTILE IRON 250 P.S.I.G. WATEROUS FIRE HYDRANT AMERICAN FLOW CONTROL It s AMERICAN What We Know. DARLING MARK 73 2 FIRE HYDRANT CONSTRUCTION WATEROUS FIRE HYDRANT TWO PIECE OPERATING
More information½" to 4" (DN15 to DN100) LEA31 and LEA33 ANSI Control Valves Installation and Maintenance Instructions
00050/1 IM-P0-02 CH Issue 1 ½" to " (DN15 to DN100) LEA1 and LEA ANSI Control Valves Installation and Maintenance Instructions 1. Safety 2. Technical details. Installation and commissioning. Maintenance
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationMORFLEX COUPLINGS Double MORFLEX Series CC Hub and Block Assemblies Round steel flanges
MORFLEX COUPLINGS The MORFLEX coupling should be installed where considerable dimensional misalignment may result, or is expected. It also cushions shock loads and absorbs vibration. The MORFLEX coupling
More informationSeries 1-HK to 8-HK 34 SOCKETS (inches) Size Brass Steel Stainless Steel (female) Across (inch) Standard UL Listed Standard High Impulse NPTF
Series HK Series 1-HK to 8-HKP Series 10-HK, 1 & 20-HK Series HK Couplings are designed for general purpose hydraulic service. Some are suitable for use with various liquids, chemicals, steam, gases and
More informationLAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G" MODEL ELT145H33GBV LT145H33GBV LT145H38GBV LT150H38GKV WLT145H38GKV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC.
More informationBETTIS ACTUATOR & CONTROLS SERVICE INSTRUCTIONS FIELD CONVERSION OF SPRING CARTRIDGE FAIL DIRECTION CLOCKWISE TO COUNTER-CLOCKWISE OR THE INVERSE
BETTIS ACTUATOR & CONTROLS SERVICE INSTRUCTIONS FIELD CONVERSION OF SPRING CARTRIDGE FAIL DIRECTION CLOCKWISE TO COUNTER-CLOCKWISE OR THE INVERSE FOR THE FOLLOWING SERIES T3XX-SRX AND T4XX-SRX SPRING RETURN
More informationCR45-3 A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR45-3 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos pump 9612281 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9612281/cr-45-3-a-f-a-e-hqqe.html
More informationParts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual DX22 / 966651501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
More informationScrewjack options. When stainless steel screws are specified, we can supply the flange end and rod end in stainless if requested.
Raised cover CA Available for MA screwjacks, the steel raised covers with toleranced dimensions act as a centring register, also allow the fitting of bronze guide bushes, protective tubes and bellows.
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More informationParts manual. Models: /ZEKW /ZEKW /ZEKW48190 MANUAL NO REV. IR (06/26/06)
Parts manual Models: 989999/ZEKW10 989999/ZEKW10 989990/ZEKW8190 MANUAL NO. 9 11 REV. IR (0//0) MODEL NUMBER SERIAL NUMBER DATE PURCHASED DEALER ADDRESS NOTES: 00 Yazoo/Kees Power Equipment. All rights
More informationDurable Superior Casters
27/2/39/DT Medium Duty Series - Up to 1,20 lbs. 2 Series Rigid Caster DT Series Dual Pedal Total-Lock Caster Options Dual Pedal TotalLock (DT) Prefix OEM Preferred Series 27 Series swivel caster shown
More informationSpartan Mower Parts Manual RT
Spartan Mower Parts Manual RT TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension Assembly..-0 Drive
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More informationCR15-01 A-F-A-E-HQQE 3x230/ HZ
GRUNDFOS DATA BOOKLET CR15-1 A-F-A-E-HQQE 3x23/4 5 HZ Grundfos pump 9651697 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9651697/cr-15-1-a-f-a-e-hqqe.html
More informationPneumatic Angle Grinder also for Underwater Use Type
M a s c h i n e n f a b r i k G m b H Pneumatic Angle Grinder also for Underwater Use Type 1 4311 0050 Illustration can differ from the original Repair Manual and Spare Parts List Compiled: 22.06.11 143110050_Inst_en_Version_00
More informationHP10253 KIT Ford F-150 2WD / 4WD 2" Leveling Kit
HP10253 KIT 2004-2017 Ford F-150 2WD / 4WD 2" Leveling Kit KIT CONTENT A B C KIT CONTENTS A Upper Strut Spacer (2) B M10 x 1.5 Flange Nut (6) C M10 x 1.5 x 40 mm Socket Head Cap Screw (6) Make sure all
More informationReplacement Parts List FI 4009 & FI 4009C. SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016
A Taco Family Company Replacement Parts List FI 4009 & FI 4009C 304-403 SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE 00
More informationFord Service Saddles and Tapping Sleeves
Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171
More informationParts List for Sentar (For Serial Numbers Prior to 19729)
Parts List for Sentar (For Serial Numbers Prior to 19729) Replace with newer revisions as they become available 2006 Wright Manufacturing, Inc. All rights reserved Updated 08/2006 52", 61" CUTTER DECKS
More information1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationINSTALLATION INSTRUCTIONS
PRODUCT SAFETY LABEL Supplied in kit is a Safety Warning label. Install label inside cab. Locate label in a highly visible location to all operators of this vehicle. 2265 Crosswind Drive Prescott, AZ 86301
More informationC13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More information1. Manual clamps Standard range Horizontal and vertical clamps made from galvanised steel plate for ligth to medium clamping application
1. Manual clamps Standard range Horizontal and vertical clamps made from galvanised steel plate for ligth to medium clamping application Clamping tools for professionals Ergonomic plastic handle, mounted
More informationScrew jacks MA Series
Screw jacks MA Series Screw jacks MA Series with travelling screw (Mod.A) STRUCTURAL ELEMENTS 1 10 11 8 7 6 1 3 13 4 9 14 8 11 10 5 6 7 1 - acme screw in steel C 43 (UNI 7847), whirled thread - worm shaft
More informationParts Manual DX254 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual DX254 / 966651203 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
More informationAWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2
More informationPARTS MANUAL VR 1214 BALE KING V-RAKE GREEN AND YELLOW NUMBERS
PARTS MANUAL VR 1214 BALE KING V-RAKE GREEN AND YELLOW NUMBERS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX: (306) 745-3364 TABLE OF
More informationSpring Steel Fasteners
Conduit Supports 1 Available for 3/8 No tools needed! in. through 2 in. Finger friendly trade sizes for design! EMT, flexible conduit and MC/ AC cable Available with either a plain hole for 1/4 in. bolt
More informationCRI10-04 A-FGJ-I-E-HQQE 3x230/ HZ
GRUNDFOS DATA BOOKLET CRI10-04 A-FGJ-I-E-HQQE 3x230/400 50 HZ Grundfos pump 96500995 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cri10/96500995/cri-10-4-a-fgj-i-e-hqqe.html
More informationMLR Series Institutional Life Safety Mortise Locksets Levers
MLR Series Institutional Life Safety Mortise Locksets Levers Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds alll operational and security tests of ANSI specifications
More informationData Sheet. AmLok.
Data Sheet AmLok options: amgard safety gate switch solutions consist of a range of Control interlocks. The control Interlocks are split into gate switches (Stops) and solenoid Interlocks (Loks). Combining
More information25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
More informationBonthron & Ewing AB. Toggle clamps manual and pneumatic. Bonthron & Ewing AB
Toggle clamps manual and pneumatic CLAMPING. SCREWING. LOCKING. Bonthron & Ewing AB Bonthron & Ewing AB Tellusvägen 13 18636 VALLENTUNA 08-514 307 60 info@bonthron-ewing.se www.bonthron-ewing.se Catalogue
More informationUniGrip Vertical Toggles
UniGrip Toggles Over 00 Clamp Variations Available Standard Series Standard s UCC-300101 Series Toggle Clamps Extra Hold Supplied with UCC-008 Neoprene-tipped Spindle and washers Will free up space on
More informationMODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO & UP
MODEL NO. -900 & UP MODEL NO. 00-900 & UP MODEL NO. 0-900 & UP MODEL NO. 0-900 & UP SKID SPRAYER FORM NO. 99-055 REV. B SET-UP AND PARTS LIST Refer to the illustrated Parts List for the details of parts
More informationPARTS BOOK CATALOG IMPLEMENT ASSEMBLIES STANDARD BOOM 3PT HITCH MOUNT
PARTS BOOK CATALOG IMPLEMENT ASSEMBLIES STANDARD BOOM 3PT HITCH MOUNT DIAMOND MOWERS, Inc. 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS
More informationBUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More information1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More information