C13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS

Size: px
Start display at page:

Download "C13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS"

Transcription

1 C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET Waregemstraat Zulte - Belgium - T F commercial@sobinco.com -

2 CONTENTS 1. General characteristics Lockcase n Lockcases n and Connection pieces n and Drive pins n Handles Handles n , -681B and Sobinox handles Installation Profile preparations Installation order Selection of rods Keep positions Opening restrictors Window stay n Door stays n and Window stays n and Application examples Order tables Operation Standard windows Balcony doors/window doors.22.02

3 1. General characteristics General Special lockcase to combine with a Chrono Standard perimeter locking system for side hung open out windows. The lockcase is operated by a handle with square spindle 7x7 mm. For more information regarding Chrono Standard fittings: see chapter C Please may we ask you to send us always your profile drawings as well as all necessary additional information so that we can provide you the best solution. The following additional information is very important: frequency of use (balcony doors, window doors) vent dimensions vent weight wind pressure type of building number of windows The net opening for standard windows must be restricted to maximum 200 mm with a window stay to prevent that: the windows would be blown over the hinges would get damaged persons would fall through the window when operating the window persons at the outside would get hurt when opening the window Standard windows The maximum opening must be restricted to 200 mm! Vent dimensions (determined by the perimeter locking system): Vent width: max mm. Vent height: max mm. Hinges and vent weight: Visible Chrono hinges: max. 90 kg. Adjustable visible Chrono hinges: max. 130 kg. Vent weight > 90 kg: + reinforcement set Vent height > 1200 mm: + 1 hinge wedge Vent height > 1800 mm: + 2 hinge wedges Concealed Chrono Invision Go hinges: max. 90 kg. Vent width: max mm Concealed Chrono Invision Pro hinges: max. 170 kg. Vent weight > 130 kg: + reinforcement set Balcony doors/window doors Balcony doors or window doors are windows with an access function for persons which makes them heavily used. The opening angle must be restricted at 90 by a door stay with buffer: n : Fbmin=780 mm or n : Fbmin=930 mm Vent dimensions (determined by the perimeter locking system): Vent width: max mm. Vent height: max mm. Hinges and vent weight: Reinforced visible Chrono hinges: max. 130 kg. Concealed Chrono Invision Go hinges: max. 90 kg. Concealed Chrono Invision Pro hinges: max. 170 kg. Vent weight > 130 kg: + reinforcement set.03

4 Profile dimensions The Chrono hardware is available to suit a frame groove of 14/18 mm or a frame groove of 10/14 mm. Chrono Invision Pro Chrono Invision Go Frame groove 14/18 mm Frame groove 10/14 mm A 14 ± ± 0.5 B 18 ± ± 0.5 Cut out vent groove Vent dimensions and vent weights out of standard range on request. Information hinges See chapter C Chrono Standard perimeter locking system The base sets and the additional centre locking sets are the same as these for side hung open in windows. For more information regarding the sets we refer to chapter C Tests The hinges and the lockcase in combination with the Chrono perimeter locking system has been tested on durability in accordance with the European standard EN , Grade H3 (20,000 cycles). Corrosion resistance Grade 4 (240h)..04

5 2. Lockcase n Compact lockcase for installation in a small profile chamber. Application: side hung open out windows and pivot windows. Can be used in combination with a Chrono perimeter locking system. The lockcase is separately available, but is normally always used in combination with a clamping piece (see next page) for a more solid and quicker installation. The lockcase can be operated by a handle with square spindle 7x7 mm and has a throw of 17 mm when turning the handle 90. Closing: throw 17 mm Unlocked position The lockcase is supplied in unlocked position and is provided with a snap-off pin which is broken off the first time the handle is operated. Lockcase finish: zinc alloy parts, black passivated. Non-handed when turning the lockcase. The opening with drive mechanism should always be upwards. Lockcase operation: Locked position throw 17 mm Unlocked position Slot for drive pin.05

6 3. Lockcases n and Lockcase n can be used separately. But the lockcase is normally always combined with a clamping piece in order to: allow an easier and quicker assembly. guarantee that the lockcase is fixed during transport of the windows. have a better positioning of the lockcase relative to the vent groove. The clamping piece ( F towards the interior side of the window) is bent and clamped in the round drill holes of the profile. The clamping piece is in black synthetic material. Lockcase n Lockcase n Lockcase n combined with clamping piece n Lockcase n combined with clamping piece n Mounted with lockcase n Mounted with lockcase n N N

7 4. Connection pieces n and Connection piece in which the drive pin for the lockcase is fixed. The drive pin is 1.6 mm out of centre when mounted on connection piece n Finish: connection piece: zinc alloy, black passivated fixing pieces: black synthetic material. Connection piece set n connection piece fixing piece N N Connection piece set n connection piece fixing piece 5. Drive pins n The lockcase is connected to the perimeter locking system by means of a drive pin. The pin in stainless steel is available in different lengths and provided with an internal hexagon SW4. The pin is fully screwed in the connection piece up against its stop. SW4 N N N N N

8 6. Handles 6.1. Handles n , -681B and -683 The Horizon handles n and n B and the Edge handle n are suitable for side hung open out windows. Handle n B has a lower grip. Square spindle 7x7 mm in steel, zinc plated. Finish: grip and base in aluminium, anodised or polyester powder coated in more than 450 RAL colours. Horizon handle n Horizon handle n B Edge handle n Spindle lengths: spindle length Handle Spindle length mm B 78 mm mm.08

9 6.2. Sobinox handles For more information: see chapter C Some handles are available in aluminium (AL). For side hung open out windows, the square spindles with length 25 mm and 38 mm are not long enough in most cases. Then you have to order a handle without square spindle (for example ) and order the square spindle n separately. n 1850(AL)-0 n 1850(AL)-25 n 1850(AL)-38 n n n n 1852(AL)-0 n 1852(AL)-25 n 1852(AL)-38 n n n n 1852CYL-0 n 1852CYL-25 n 1852CYL-38 n n n n n n n 1855(AL)-0 n 1855(AL)-25 n 1855(AL)-38 n n n n 1857(AL)-0 n 1857(AL)-25 n 1857(AL)-38 n n n n 1857CYL-0 n 1857CYL-25 n 1857CYL-38 n n n n n n Square spindle n of 7x7 mm, length 114 mm, steel zinc plated: Handle Minimum spindle length L Maximum spindle depth L1 70 mm 44 mm 72 mm 42 mm 56 mm 58 mm 54 mm 60 mm 62 mm 52 mm.09

10 7. Installation 7.1. Profile preparations Dimensions A and B are profile dependent. The lockcase should not project through the profile wall at the glass side. With clamping piece n With clamping piece n

11 7.2. Installation order 1. Bend the clamping piece ( F towards the interior side of the window) and clamp it in the round drill holes of the profile. Clamp the lockcase in the clamping piece. 2. Position the handle on the profile in unlocked position of the lockcase (grip turned 90 ). 3. Fix the handle with screws M5 DIN Slide in the fittings above (or below) the handle in the vent groove to the correct position (the bolt is positioned on the vent run on rest). 5. Slide the connection piece in the vent groove on the adjustment rod. 6. Clamp the connection piece on the adjustment rod by means of the fixing piece in synthetic material. 7. Fully screw in the drive pin in the connection piece up against its stop. 8. Slide in the gear below (or above) the handle in the vent groove to the correct position (the bolt is positioned on the vent run on rest). 9. Clamp the connection piece on the adjustment rod by means of the fixing piece in synthetic material. 10. Mount the cover on the handle base. 11. Check the good working of the perimeter locking system..11

12 8. Selection of rods The system consists of 10 transmission rods with different lengths: , , ,... The adjustment range of each rod is 50 mm. Use of window stay n Other rod selection below the handle! The window stay is only possible for a handle height A of more than 608 mm..12

13 9. Keep positions This drawing only shows the situation when the handle is in the middle (A = Fh/2). Note: viewed from the exterior side! Important! Tighten all clamping screws (grub screws 2.5 mm) with a force of 1.75 Nm +/-0.25 Nm..13

14 10. Opening restrictors Window stay n The window stay must be mounted for side hung open out windows to restrict the opening to a maximum of 200 mm. This detachable window stay, provided with incorporated adjustable friction, is applied in the following cases: When a certified window stay is required. The window stay has been tested in accordance with the British Standard BS When there s not enough space for a Chrono window stay n or -902 at the bottom. This is the case when the vent width Fb is more than 1200 mm so that an additional centre locking set must be mounted. The window stay can be disconnected by a special key n R7437. Finish: window stay in stainless steel AISI 304, friction device in synthetic material. Window stay set n N Quantity Description 1 1 Detachable window stay SDR8 2 1 Connection rod 3 1 Key R Screw M5x20-TX25 Din Blind rivnut Alu M5 UFO Distance bush Dimensions and profile preparations: The set contains a special aluminium connection rod which slides under the window stay track. The rod is provided with slotted holes for the fixing of the track. Fixing by means of blind rivnuts and Torx screws, included in the set. Mill frame groove The window stay is mounted vertically and the rod is connected to the lower bolt. The position of the frame part will dictate the opening distance of the window. Milling frame profile Milling vent profile.14

15 10.2. Door stays n and -500 The door stay must be mounted for balcony doors and window doors. Reinforced, concealed door stay with high impact resistance. Tested in accordance with the European standard EN , impact test class 4. High durability: > 100,000 cycles. Reinforced end position stop, provided with a self-lubricating buffer in synthetic material. Fabricated from stainless steel materials. Solid fixing of frame and vent part by blind rivnuts M5 UPO30 (cylindrical head) and screws DIN 965 M5x25. The rivnuts and screws are included. Order code L D E F Installation dimensions and drill holes:.15

16 10.3. Window stays n and -902 The window stay must be mounted for standard side hung open out windows to restrict the opening to a maximum of 200 mm. An opening of only 120 mm is possible for a window stay n The position of the window stay in the window will dictate the opening distance of the window. The window stay is detachable by turning rivet R with a 4 mm hexagon key. Provided with an incorporated adjustable friction by tightening the screw S, so that the window can be slowed down. 11. Application examples Handle n Square spindle n (76 mm) Lockcase n Connection piece n Drive pin n Handle n Lockcase n Connection piece n Drive pin n

17 12. Order tables Operation The operation consists of: Handle B The selection of the parts for the operation depends on the profile! Lockcase Drive pin Connection piece Screws for handle Fixing screws M5xlength Din 965 for the handle Distance Z mm mm mm mm mm mm Screw geen M5x55 M5x60 M5x65 M5x70 M5x75 M5x80 Code in set A B C D E F Centre of vent groove The combination of these parts (without handle!) is available in sets n Example: A -, A, B, C, D, E, F: see above Drive 10: 11: 12: 13: 14: pin: Lockcase + connection piece: 720: : : : Set number.17

18 12.2. Standard windows Perimeter locking set with visible Chrono hinges Note: Maximum vent weight: 90 kg. Base set for frame groove 14/18 mm Fb = Fb = Fb = Fh = Fh = Fh = Maximum net opening x x x x x x mm 200 mm 200 mm Base set for frame groove 10/14 mm Fb = Fb = Fb = Fh = Fh = Fh = Maximum net opening x x x x x x mm 200 mm 200 mm.18

19 Perimeter locking set with adjustable visible Chrono hinges Notes: Maximum vent weight: 130 kg. Vent weight > 90 kg: + reinforcement set n Base set for frame groove 14/18 mm Fb = Fb = Fb = Fh = Fh = Fh = Maximum net opening mm 200 mm 200 mm Base set for frame groove 10/14 mm Fb = Fb = Fb = Fh = Fh = Fh = Maximum net opening mm 200 mm 200 mm.19

20 Perimeter locking set with Chrono Invision Pro hinges Notes: Maximum vent weight: 170 kg. Vent weight > 130 kg: Reinforcement set n (14/18 mm) Reinforcement set n (10/14 mm) Base set for frame groove 14/18 mm Fb = Fb = Fb = Fh = Fh = Fh = Maximum net opening R(L) R(L) R(L) R(L) R(L) R(L) R(L) R(L) R(L) 120 mm 200 mm 200 mm Base set for frame groove 10/14 mm Fb = Fb = Fb = Fh = Fh = Fh = Maximum net opening R(L) R(L) R(L) R(L) R(L) R(L) R(L) R(L) R(L) 120 mm 200 mm 200 mm.20

21 Perimeter locking set with Chrono Invision Go hinges Notes: Maximum vent weight: 90 kg. Maximum vent width: 1300 mm. Base set for frame groove 14/18 mm Fb = Fb = Fb = Fh = Fh = Fh = Maximum net opening R(L) R(L) R(L) R(L) R(L) R(L) R(L) R(L) R(L) 120 mm 200 mm 200 mm Base set for frame groove 10/14 mm Fb = Fb = Fb = Fh = Fh = Fh = Maximum net opening R(L) R(L) R(L) R(L) R(L) R(L) R(L) R(L) R(L) 120 mm 200 mm 200 mm.21

22 12.3. Balcony doors/window doors Perimeter locking set with reinforced visible Chrono hinges Note: Maximum vent weight: 130 kg. Base set for frame groove 14/18 mm Base set for frame groove 10/14 mm Fb = Fb = Fb = Fb = Fh = x x Fh = x x Perimeter locking set with Chrono Invision Pro hinges Notes: Maximum vent weight: 170 kg. Vent weight > 130 kg: Reinforcement set n (14/18 mm) Reinforcement set n (10/14 mm) Base set for frame groove 14/18 mm Base set for frame groove 10/14 mm Fb = Fb = Fb = Fb = Fh = R(L) R(L) Fh = R(L) R(L) Perimeter locking set with Chrono Invision Go hinges Note: Maximum vent weight: 90 kg. Base set for frame groove 14/18 mm Base set for frame groove 10/14 mm Fb = Fb = Fb = Fb = Fh = R(L) R(L) Fh = R(L) R(L)

C12.11 SALTO 4208 C12 SIDE HUNG WINDOWS

C12.11 SALTO 4208 C12 SIDE HUNG WINDOWS C12 SIDE HUNG WINDOWS C12.11 01.07.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...

More information

C14.12 WINDOW STAYS C14 SIDE HUNG WINDOWS

C14.12 WINDOW STAYS C14 SIDE HUNG WINDOWS C14 SIDE HUNG WINDOWS 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Window stays series 681-.. and n 684-12....03

More information

K17.13 DOOR STAYS K17 DOORS

K17.13 DOOR STAYS K17 DOORS K17 DOORS K17.13 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door stays n 684(C)-500...K17.13.03 1.1.

More information

A12.11 SALTO 4008 A12 TURN-TILT WINDOWS

A12.11 SALTO 4008 A12 TURN-TILT WINDOWS A12 TURN-TILT WINDOWS A12.11 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...

More information

B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS

B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS B12 TILT-TURN WINDOWS B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS

More information

C.4.CHRONO TILT AND TURN

C.4.CHRONO TILT AND TURN C.4. Contents General characteristics................... Base set n 31111, 31112 and 31113...... Centre locking set n 30140-30........... Selection of rods n 30000-................ page C.4.2 C.4.5 C.4.6

More information

B.1.CHRONO SIDE HUNG OPEN IN WINDOWS

B.1.CHRONO SIDE HUNG OPEN IN WINDOWS B.1. SIDE HUNG OPEN IN Contents General characteristics................... page B.1.2 Base set n 20110...................... B.1.4 Centre locking sets n 30140-800 and 20140-35..........................

More information

FrENcH casement windows D11.15 HINGES

FrENcH casement windows D11.15 HINGES D11 French casement windows HINGES 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Hinges Contents 1. General....03

More information

RC2 B11.09 CHRONO SAFE (RC2) B11 TILT-TURN WINDOWS

RC2 B11.09 CHRONO SAFE (RC2) B11 TILT-TURN WINDOWS B11 TILT-TURN WINDOWS RC2 B11.09 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...

More information

G11.11 INVISITOP FOR BOTTOM HUNG WINDOWS

G11.11 INVISITOP FOR BOTTOM HUNG WINDOWS G11 FAN LIGHT WINDOWS G11.11 50141 FOR BOTTOM HUNG WINDOWS 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS

More information

RC2 E11.09 CHRONO SAFE (RC2) E11 BOTTOM HUNG OPEN IN WINDOWS

RC2 E11.09 CHRONO SAFE (RC2) E11 BOTTOM HUNG OPEN IN WINDOWS E11 BOTTOM HUNG OPEN IN WINDOWS RC2 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...03

More information

TURN-TiLT WiNDOWs A11.16 CHRONO ACCessORies

TURN-TiLT WiNDOWs A11.16 CHRONO ACCessORies A11 TURN-TILT WINDOWS A11.16 CHRONO Accessories 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. Window stay

More information

C.3 CHRONO MISCELLANEOUS. Contents. turn-tilt- and tilt-turn window

C.3 CHRONO MISCELLANEOUS. Contents. turn-tilt- and tilt-turn window C.3 Turn-tilt and tilt-turn windows CHRONO MISCELLANEOUS Contents 1. Night vent device n 30140-861 C.3.02 1.1. General C.3.02 1.2. Profile dimensions C.3.02 1.3. Operation C.3.03 1.4. Air flow C.3.03 1.5.

More information

H13.11 HANDLES H13 HORIZONTAL AND VERTICAL PIVOT WINDOWS

H13.11 HANDLES H13 HORIZONTAL AND VERTICAL PIVOT WINDOWS H13 HORIZONTL N VERTIL PIVOT WINOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - coercial@sobinco.com - www.sobinco.com ONTENTS 1. General information....03

More information

A.10 CHRONO FOR PIVOTING WINDOWS. Contents. Horizontal and vertical pivoting windows

A.10 CHRONO FOR PIVOTING WINDOWS. Contents. Horizontal and vertical pivoting windows A.10 Hizontal and vertical pivoting windows CHRONO 10040 FOR PIVOTING WINDOWS Contents 1. General characteristics A.10.02 2. Base set n 10040 A.10.03 3. Centre locking set n 30140-800 A.10.04 4. Selection

More information

C.9.CHRONO INVISI TILT AND TURN

C.9.CHRONO INVISI TILT AND TURN C.9. Contents General characteristics... Base set (standard) n 31117, 31118 and 31119... Selection of rods n 30000-...... Installation instructions... Base set PLUS n 31517, 31518 and 31519 Installation

More information

A.15 HANDLES FOR PERIMETER LOCKING SETS. Contents. Horizontal and vertical pivoting windows

A.15 HANDLES FOR PERIMETER LOCKING SETS. Contents. Horizontal and vertical pivoting windows .15 Horizontal and vertical pivoting windows HNLES FOR PERIMETER LOKING SETS ontents 1. General information.15.02 1.1. Handles series 501, 502 and 503.15.02 1.2. Handles series 5010, 5020 and 5030.15.02

More information

Single locks series k

Single locks series k k12 Doors K12.13 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. Door locks series 8000... K12.13.03 1.1.

More information

F11.13 FRICTION HINGES F11 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS

F11.13 FRICTION HINGES F11 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS F11 AND TOP HUNG WINDOWS F11.13 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General information...f11.13.03

More information

K16.14 STAINLESS STEEL DOOR PULLS

K16.14 STAINLESS STEEL DOOR PULLS K16 DOORS K16.14 01.06.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K16.14.03 1.1. General information

More information

DICTATOR RTS Tube Door Closer

DICTATOR RTS Tube Door Closer DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is virtually invisible because being built into the door. The joint can only be seen when the door is open. The

More information

argenta opening doors

argenta opening doors Door and window fittings Content Table of contents Introduction... 03 Window restrictors... 04 Window handles for aluminium frames... 06 Window handles for wooden frames... 07 Window handles for PVC frames...

More information

THE NEW HARDWARE SYSTEM ALU 540. Roto ALU 540. FB 44-0 GB July 2005 Alu B.U./J.S. (Translation: Prunty 9/05)

THE NEW HARDWARE SYSTEM ALU 540. Roto ALU 540. FB 44-0 GB July 2005 Alu B.U./J.S. (Translation: Prunty 9/05) THE NEW HARDWARE SYSTEM ALU 540 1 APPLICATION RANGE Hinge-side compatible with all conventional Euro-chamber profiles Clampable hinge-side with preassembled clamp-strips Available for all standard opening

More information

JdB cassette. Version 1.03 Sun Protection AVZ 3J.1

JdB cassette. Version 1.03 Sun Protection AVZ 3J.1 Version 1.0 Sun Protection AVZ J.1 J.2 Sun Protection AVZ Version 1.0 4211 424-000 Alu wall bracket JdB 95 mm Mill finish 4211 424-006 Idem RAL 9010 pure white 4211 424-755 Idem (* = Textured) RAL 7016

More information

2: Ecokit Ecokit 11 Overview A 2_ Ecokit 11 Sub Rack Configuration A 2_ Width A 2_ Height / Depth A 2_6

2: Ecokit Ecokit 11 Overview A 2_ Ecokit 11 Sub Rack Configuration A 2_ Width A 2_ Height / Depth A 2_6 2: Ecokit 11 2.1 Ecokit 11 Overview 2_3 2.2 Ecokit 11 Sub Rack Configuration 2_5 2.2.1 Width 2_5 2.2.2 Height / Depth 2_6 2.2.3 Handles 2_6 2.2.4 Line Drawing 2_7 2.3 daptation Kits 2_8 2.3.1 daptation

More information

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear

More information

FENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET SCF PVC

FENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET SCF PVC FENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION 06.2 Tilt&Turn Hardware UNI-JET SCF PVC Table of Contents 06.2 UNI-JET SCF PVC 06 2 DIRIGENT T&T Handle... 06.2.9 Tilt&Turn Sash...

More information

Single action, hinged

Single action, hinged PY 55 DOOR Single action, hinged Applications: Single action Single or double door leaf Composite frames 2 Single and double action anti finger trap pivot Applications: Single action, bulb stile Double

More information

markilux 730 / 830 The drop-arm cassette awning with gas piston-tensioned arms the awning that gives you just the amount of shade you need

markilux 730 / 830 The drop-arm cassette awning with gas piston-tensioned arms the awning that gives you just the amount of shade you need VERTICAL BLDS AND CONSERVATORY AWNGS safe timeless beautiful markilux 730 / 830 The drop-arm cassette awning with gas piston-tensioned arms the awning that gives you just the amount of shade you need rated

More information

Stirrup-shaped handles, machine handles, apparatus handles

Stirrup-shaped handles, machine handles, apparatus handles Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles

More information

Profile series I-40. System kit Profile series I-40

Profile series I-40. System kit Profile series I-40 Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000

More information

Patio doors max. Sash width (mm) 600 to Sash height (mm) 550 to Sash weight (kg) max. 150 max. 150

Patio doors max. Sash width (mm) 600 to Sash height (mm) 550 to Sash weight (kg) max. 150 max. 150 ALU 5200-D (150 kg) Turn only hardware for hinge clearance (BD) 5 mm BD 5 Size range (depends on hardware) Windows min. max. Patio doors max. Sash width (mm) 600 to 1600 1300 Sash height (mm) 550 to 2000

More information

Hahn Serie 60 AT. Universal hinge for versatile application. More modern look Improved technology

Hahn Serie 60 AT. Universal hinge for versatile application. More modern look Improved technology Hahn Serie 60 AT Universal hinge for versatile application! More modern look Improved technology 2 4 5 6 7 8 9 2 3 4 5 6 7 8 9 2 Hahn Serie 60 AT For all doors made from metal profile sections NEW! Uniform

More information

Product information. Projecting top hung window fi ttings. Application. Geared handles SPACIO. Materials, surface sealing ferguard*silver

Product information. Projecting top hung window fi ttings. Application. Geared handles SPACIO. Materials, surface sealing ferguard*silver Product information Projecting top hung window fi ttings Application Projecting top hung window fi ttings are primarily designed for use on metall windows and need to be planned for each project individually.

More information

markilux 745 / 845 VERTICAL BLINDS AND CONSERVATORY AWNINGS safe timeless beautiful rated to wind resistance class 2 (corresponds to Beaufort 5)

markilux 745 / 845 VERTICAL BLINDS AND CONSERVATORY AWNINGS safe timeless beautiful rated to wind resistance class 2 (corresponds to Beaufort 5) VERTICAL BLDS AND CONSERVATORY AWNGS safe timeless beautiful markilux 745 / 845 The marquisolette in a cassette with guide tracks and innovative gas piston-tensioned sliding arm technology the ideal combination:

More information

19" chassis F. Downloads and further important information can be found on the Internet under Overview Cabinets...

19 chassis F. Downloads and further important information can be found on the Internet under   Overview Cabinets... Overview... 0 Cabinets... 1 19" chassis Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 02192001 Subracks/ 19" chassis... 6 ront panels,

More information

ARCHITECTURAL ALUMINIUM SOLUTIONS. Door Closers. Comfort and safety. Sapa Building System

ARCHITECTURAL ALUMINIUM SOLUTIONS. Door Closers. Comfort and safety. Sapa Building System ARCHITECTURAL ALUMINIUM SOLUTIONS Door Closers Comfort and safety Sapa Building System 1 DOOR CLOSERS - GOOD TO KNOW COMFORT AND SAFETY Door closers must be able to cope with routine operations and emergency

More information

Patio doors max. Sash width (mm) 365 to Sash height (mm) 550 to Sash weight (kg) max. 100/130 max. 100/130

Patio doors max. Sash width (mm) 365 to Sash height (mm) 550 to Sash weight (kg) max. 100/130 max. 100/130 ALU 5200-D (130 kg) Turn only hardware for hinge clearance (BD) 5 mm BD 5 Size range It is essential to adhere to the details of the system provider. Windows min. max. Patio doors max. Sash width (mm)

More information

Visual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page

Visual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening

More information

mechanics Features Technical specification Ordering information Dimensioned drawings Aluminium profiles made by isel

mechanics Features Technical specification Ordering information Dimensioned drawings Aluminium profiles made by isel Panel profiles PP profiles For fast and easy erection of frames, benches and racks luminium, naturally anodised easy, very strong under load Top edge particularly suitable as a load-bearing cladding, also

More information

Indexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel

Indexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing

More information

a total louvre design and manufacturing service

a total louvre design and manufacturing service BL-LD Series Fully Louvred Doors Index Page BL50LD Aluminium louvred door 3 BL75LD Aluminium louvred door 4 BL50BF Insert louvres for doors 7 BL-LD Series - Fully Louvred Doors For more details on the

More information

Sliding Door Fittings, Roller Shutters Folding Sliding Door Fittings

Sliding Door Fittings, Roller Shutters Folding Sliding Door Fittings Silent Fold 20/A, door weight up to 20 kg Area of application: For folding doors mounted to the carcase on one side, without running and guide track, for opening and closing the folding doors without blocking

More information

2: Stylebox Stylebox 15 Overview B 2_ Complete Stylebox 15 Kits B 2_ Stylebox 15 Standard Kit B 2_8

2: Stylebox Stylebox 15 Overview B 2_ Complete Stylebox 15 Kits B 2_ Stylebox 15 Standard Kit B 2_8 2.1 Stylebox 15 Overview 2_3 2.1.1 Complete Stylebox 15 Kits 2_7 2.1.2 Stylebox 15 Standard Kit 2_8 2.2 Stylebox 15 Smart 2_10 2.2.1 Width 2_11 2.2.2 Height ezel 2_11 2.2.3 Depth 2_11 2.2.4 Top Cover Panel

More information

Secured Door w/ Electric Lock - Solenoid

Secured Door w/ Electric Lock - Solenoid Secured Door w/ Electric Lock - Solenoid Solution family: Interior Door solution Solution group: Single-Wood-Self Closing- Access Control Description The ASSA ABLOY Belgium solution for secured interior

More information

Material: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated

Material: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated 4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt

More information

HELM Hardware for Sliding Gates. Sliding hardware

HELM Hardware for Sliding Gates. Sliding hardware HELM Hardware for Sliding Gates Sliding hardware HELM Hardware for Sliding Gates Contents General Information General Information Page 3 Hardware for Sliding Gates General Information, HELM 00 - HELM 700

More information

Content. Door closer. Overview General information door closer 81 Allocation of sash width to dimension of door closer 82 Adjustment options 82

Content. Door closer. Overview General information door closer 81 Allocation of sash width to dimension of door closer 82 Adjustment options 82 Content Overview General information door closer 81 Allocation of sash width to dimension of door closer 82 Adjustment options 82 Slide rail door closer for single-sash doors 83 Slide rail door closer

More information

SKYFORCE. Max. width up to 3000 mm Suitable for plastic, aluminium and wooden frames Mounting on stone, concrete and steel

SKYFORCE. Max. width up to 3000 mm Suitable for plastic, aluminium and wooden frames Mounting on stone, concrete and steel SKYFORCE Quick and simple mounting Different surface finishes Available for different glass thicknesses, pre-assembled as set Max. width up to 3000 mm Suitable for plastic, aluminium and wooden frames

More information

GETO Megaport II Flush rear doors

GETO Megaport II Flush rear doors For body kits, curtainsider kits and other bodywork kits Approved to DIN EN 1262 Code XL Decisive weight advantage GETO Megaport II Flush rear doors TITGEMEYER For all those who have something to say The

More information

Hinges and Flap Fittings Furniture Hinges

Hinges and Flap Fittings Furniture Hinges Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502

More information

Doors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)

Doors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5) Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable

More information

SKYFORCE. Max. width up to 3000 mm Suitable for plastic, aluminium and wooden frames Mounting on stone, concrete and steel

SKYFORCE. Max. width up to 3000 mm Suitable for plastic, aluminium and wooden frames Mounting on stone, concrete and steel SKYFORCE Quick and simple mounting Different surface finishes Available for different glass thicknesses, pre-assembled as set Max. width up to 3000 mm Suitable for plastic, aluminium and wooden frames

More information

Restrictors & Security Devices. Hardware By Professionals For Professionals

Restrictors & Security Devices. Hardware By Professionals For Professionals Restrictors & Security Devices Hardware By Professionals For Professionals 102 103 Restrictors & Security Devices Contents RRestrictors & Security Devices Selection Mila stock a comprehensive range of

More information

B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections

B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components

More information

TECHNOLOGY IN MOTION MACO MULTI-TREND TU.-ON. AND T&T FITTINGS. Installation instructions TIMBER WINDOWS

TECHNOLOGY IN MOTION MACO MULTI-TREND TU.-ON. AND T&T FITTINGS. Installation instructions TIMBER WINDOWS TECHNOLOGY IN MOTION TU.-ON. AND T&T FITTINGS Installation instructions TIMBER WINDOWS System designation: TO > Single routing DT > Double routing AS > Face fix fittings Note about surfaces fittings are

More information

L Standard Parts for Mould Making

L Standard Parts for Mould Making A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components

More information

Ceiling Slot Diffuser Model DSX

Ceiling Slot Diffuser Model DSX Ceiling Slot Diffuser Model DSX Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3

More information

DICTATOR Door Checks

DICTATOR Door Checks DICTATOR Door Checks Ensure Doors to Close Quietly. Doors can be incredibly noisy. Not only when people slam them, but also due to air pressure, gusts of wind and inadequate door closers. The more violent

More information

Sliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings

Sliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings Ultra 20 Swing Door fitting, door weight up to 20 kg Area of application: Door swings out to the front and to the side when being opened, allowing unlimited access to the cabinet interior, can be used

More information

STRUCTURAL GLAZING LTD. SG2000 Product Manual. Fixed Glazed Units Top Hung Windows Side Hung Windows

STRUCTURAL GLAZING LTD. SG2000 Product Manual. Fixed Glazed Units Top Hung Windows Side Hung Windows SG2000 Product Manual Fixed Glazed Units Top Hung Windows Side Hung Windows SG PRODUCT RANGE The Structural Glazing range comprises of three core products: THE SG2000 ECO VENT THE SG2000-101/2 FIXED LIGHT

More information

Approvals, see page 41. Detailed drawing, see page 1226/1227.

Approvals, see page 41. Detailed drawing, see page 1226/1227. Ex enclosures Stainless steel F G B.7 With screw-fastened lid Material: Stainless steel.40 (AISI 04) Surface finish: Brushed, grain 40 Protection category: IP 66 to EN 60 9/09.00 Supply includes: Enclosure,

More information

DOOR TECHNOLOGY ORDER CATALOG SECTION GU-SECURY Automatic European Profile Cylinder Operated Locks

DOOR TECHNOLOGY ORDER CATALOG SECTION GU-SECURY Automatic European Profile Cylinder Operated Locks DOOR TECHNOLOGY ORDER CATALOG SECTION 03.12 GU-SECURY Automatic European Profile Cylinder Operated Locks Table of Contents 03.12 SECURY Automatic European Profile Cylinder Operated Door Locks SECURY Automatic

More information

argenta opening doors

argenta opening doors argenta opening doors argenta invisidoor Invisible aluminium frame for interior doors Content argenta invisidoor... 4 argenta invisidoor AX / AX PRO... 10 argenta invisidoor SD / SDX... 16 general information...

More information

GEZE rwa and ventilation technology BEWEGUNG MIT SYSTEM

GEZE rwa and ventilation technology BEWEGUNG MIT SYSTEM rwa and ventilation technology convenient and safe opening electrically operated BEWEGUNG MIT SYSTEM Table of Contents Foreword electrically operated ventilation 4 Chapter 1 Chain drives 1.1 1.1.1 chain

More information

EA patch fittings for offset hung doors in toughened glass assemblies 56. Top centres for wood and steel frames 58. Glass preparation details 60

EA patch fittings for offset hung doors in toughened glass assemblies 56. Top centres for wood and steel frames 58. Glass preparation details 60 EA General information 50 EA patch fittings for offset hung doors, 24 mm frame stop depth EA patch fittings for offset hung doors, various frame stop depths 54 EA patch fittings for offset hung doors in

More information

Hardware Solution for Windows

Hardware Solution for Windows Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Handle controlled opening arrester Wilh. Schlechtendahl

More information

General Equipment Marker Boards. Air Reservoirs. Chassis Components. Content - Section 10. Chassis Components

General Equipment Marker Boards. Air Reservoirs. Chassis Components. Content - Section 10. Chassis Components Content - Section Marker Boards Air Reservoirs.1 Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com UK Marker Boards Marker Boards to BSAU 152 1400mm Type 1 140mm 1 Aluminium 9901 140mm

More information

USS - External Louvre. Halton USS. External Louvre

USS - External Louvre. Halton USS. External Louvre Halton USS External Louvre External louvre for air intake and exhaust to prevent rain, snow, leaf and animal ingress Rainwater ingress penetration efficiency of approx. 95% (USS/I) Operation based on special

More information

Standard Machine Elements Worldwide

Standard Machine Elements Worldwide Standard Machine Elements Worldwide 2 GN 473 Foot clamp mountings Aluminium GN 480.1 Retaining rods Retaining tubings Stainless Steel Pictorial index GN 474 Two-way clamp mountings Aluminium page 5 GN

More information

Please ask your local representative for your individual front panel design. You find your contact person on our home-page

Please ask your local representative for your individual front panel design. You find your contact person on our home-page Front Panels In addition to the wide range of standard front panels we also provide on request individual customer specific custom front panels with punching, surface finish and silk screening. Textured

More information

Profile guide/actuator - RK Compact

Profile guide/actuator - RK Compact Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of

More information

Smart Visoglide Plus Sliding Door System

Smart Visoglide Plus Sliding Door System Smart Visoglide Plus Sliding Door System 1 P a g e Recommended Design Limitations - Maximum Sash Weight Maximum Sash Height Minimum Sash Height Maximum Sash Width Maximum Glass Thickness U Value 200kg

More information

4 100 Concealed Hinge Pr02 90

4 100 Concealed Hinge Pr02 90 4 100 oncealed Hinge Pr02 90 oor bending 20mm for nested door 90 oncealed Hinge for RH or LH application. The 2 main hinge parts have a central guide to prevent door sagging during adjustment. Material:

More information

EVO-1162 EVO Tailgate Tire Carrier

EVO-1162 EVO Tailgate Tire Carrier EVO-1162 EVO Tailgate Tire Carrier Bill of Materials EVO-1162 Tailgate Tire Carrier Part number Description Quantity EVO-12161 EVO Tailgate Tire Carrier 1 EVO-12162 Bolt Plate 1 EVO-12163 Wheel Mount 1

More information

Aperto 60/H. Sliding walls without efforts. Hardware system for stackable wooden partitions up to 60 kg (132 lbs.) Description.

Aperto 60/H. Sliding walls without efforts. Hardware system for stackable wooden partitions up to 60 kg (132 lbs.) Description. H A W A Aperto 60/H Patents Sliding walls without efforts. Hardware system for stackable wooden partitions up to 60 kg (1 lbs.) Description The first system on the market purpose-designed for lightweight

More information

Locking and Security Information

Locking and Security Information Information Profile cylinder Locking cylinders are catergorized according to a) Front view b) Side view Profile cylinder Double cylinder Single cylinder Thumbturn cylinder The definition of important components

More information

ALU 5200-TBT (150 kg)

ALU 5200-TBT (150 kg) ALU 5200-TBT (150 kg) FBS Tilt-and-turn hardware for hinge clearance (BD) 5 mm with mishandling device (FBS) on the corner drive (EUL) KPW BD 5 Tilt point horizontal (KPW) Size range It is essential to

More information

Floor Spring Accessories DORMA. BTS Accessories

Floor Spring Accessories DORMA. BTS Accessories Floor Spring Accessories DORMA BTS Accessories Floor spring accessories Single action aluminium doors For single action aluminium doors Aluminium door straps 2 For flush-closing single action aluminium

More information

HINGES Weld-on Hinges Steel. Weld-on Hinges Steel. MATERIAL Steel. FINISH Raw. FEATURES Brass Washer Steel Pin Grease Nipple

HINGES Weld-on Hinges Steel. Weld-on Hinges Steel. MATERIAL Steel. FINISH Raw. FEATURES Brass Washer Steel Pin Grease Nipple 47 48 Weld-on Hinges 7004.00 Raw Brass Washer Pin Grease Nipple Weld-on Hinges 7010.00 Raw Brass Washer Pin 49 Weld-on Hinges 7005.00.080, 7005.00.100 Raw Brass Washer Brass Pin Grease Nipple 7005.00.080

More information

Chapter 52 DOORS -Title

Chapter 52 DOORS -Title Chapter 52 DOORS 52-Title Page 1 January 23, 2012 INTENTIONALLY LEFT BLANK 52-Title Page 2 January 23, 2012 LIST OF EFFECTIVE PAGES Chapter Section Page No. Date 52 52-Title 1 January 23, 2012 2 January

More information

GTK 80. Technical data

GTK 80. Technical data Industrial square suspension system with open cable duct for heavy loads Modular construction with free accessible cable duct Floor, top-mounting or wall exit options Technical data Material: connecting

More information

HAUTAU ATRIUM Alu-HKS 200. for aluminium systems

HAUTAU ATRIUM Alu-HKS 200. for aluminium systems Catalogue HAUTAU ATRIUM Alu-HKS 200 for aluminium systems HAUTAU Catalogue Tilt and Slide Fittings ATRIUM Alu-HKS 200 2017 Version 08/2017 You will find the latest catalogue version online on www.hautau.de

More information

Incorporating V2.1. Product spec >>> > Series WL - Standard weather louvres

Incorporating V2.1. Product spec >>> > Series WL - Standard weather louvres Incorporating V2.1 Product spec >>> > Series WL - Standard weather louvres Louvres Standard Recoended for: Exterior walls Intake & return Overview Good rain protection Flanged, recessed and reversed available

More information

Hinges. Concealed hinges. Concealed hinge 90 opening

Hinges. Concealed hinges. Concealed hinge 90 opening oncealed hinges oncealed hinge 90 opening Pins and links in 430 stainless steel Mounting features: - For nested doors or surface mounted doors. - LH or RH options. - For horizontal or vertical applications.

More information

Sliding Door Fittings, Roller Shutters

Sliding Door Fittings, Roller Shutters Sliding Door Fittings, Roller Shutters Contents Sliding Timber Door Fittings Finetta Flatfront Foldfront Mobilus Classic Sliding door system Automatic sliding door system Planomix Planofit Straightening

More information

Weld-on Hinges Weld-on Hinges

Weld-on Hinges Weld-on Hinges 54 53 Weld-on Hinges 7004.00 Satin Brass Washer Pin Grease Nipple Weld-on Hinges 7004.90 Aluminium Satin Stainless Washer Stainless Pin Grease Nipple 55 Weld-on Hinges 7005.00.080, 7005.00.100 Satin Brass

More information

ALPRO ALPRO. The hinge system for aluminium and steel doors

ALPRO ALPRO. The hinge system for aluminium and steel doors The hinge system for aluminium and steel doors 2 INDEX The hinge system for aluminium and steel doors 5 6 7 Aluminium door hinge Aluminium and stainless steel for inward-opening doors for inward-opening

More information

2 tilt only stays min. max. Sash width (mm) > Sash height (mm) Sash weight (kg) max. 30 kg max.

2 tilt only stays min. max. Sash width (mm) > Sash height (mm) Sash weight (kg) max. 30 kg max. ALU axxent PLUS-K Concealed tilt-only hardware Size range It is essential to adhere to the details of the system provider. 1 tilt only stay min. max. 2 tilt only stays min. max. Sash width (mm) 400 1020

More information

FRONT DOOR LOCK ACTUATOR (G531598)

FRONT DOOR LOCK ACTUATOR (G531598) PUBLISHED: 11-MAY-2011 2006.50 XK RANGE (X150), 501-14 HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS FRONT DOOR LOCK ACTUATOR (G531598) REMOVAL AND INSTALLATION REMOVAL 1. Remove the window regulator. For

More information

MECHANICS. Aluminium profiles Linear guides Drive elements Linear units Rotational units

MECHANICS. Aluminium profiles Linear guides Drive elements Linear units Rotational units Aluminium profiles...2-2 Linear guides...2-18 Drive elements...2-44 Linear units...2-52 Rotational units...2-94 Aluminium profiles Aluminium profiles PP profiles Panel profiles PP PP 100 PP 1 PP 200 Overview

More information

Popular steel Atlas locker is available in a range of door options direct from stock with next day dispatch.

Popular steel Atlas locker is available in a range of door options direct from stock with next day dispatch. Popular steel Atlas locker is available in a range of door options direct from stock with next day dispatch. Atlas Range The Atlas locker is available in two popular depths - 300mm or 450mm, with a choice

More information

Smart Visofold 1000 Series Bi Fold Door System

Smart Visofold 1000 Series Bi Fold Door System Smart Visofold 1000 Series Bi Fold Door System 1 P a g e Smart Visofold 1000 Series - Recommended Design Limitations Minimum Sash Width Maximum Sash Width Maximum Sash Height Maximum Sash Weight 700mm

More information

BTS Accessories. Floor Spring Accessories

BTS Accessories. Floor Spring Accessories BTS Accessories Floor Spring Accessories Floor spring accessories Single action aluminium doors For single action aluminium doors Aluminium door straps 2 For flush-closing single action aluminium doors

More information

markilux 1500 The semi-cassette awning with gas piston arm technology Something special and not just technically speaking

markilux 1500 The semi-cassette awning with gas piston arm technology Something special and not just technically speaking PATIO AND BALCONY AWNINGS safe timeless beautiful rated to wind resistance class 2 (corresponds to Beaufort 5) markilux 1500 The semi-cassette awning with gas piston arm technology Something special and

More information

OCTAWALL 60 HYBRID ONE SOLUTION. FOR FABRIC AND PANELS. THE ALL-ROUNDER W 735R.

OCTAWALL 60 HYBRID ONE SOLUTION. FOR FABRIC AND PANELS. THE ALL-ROUNDER W 735R. OCTA WALL 60 HYBRID OCTAWALL 60 HYBRID ONE SOLUTION. FOR FABRIC AND PANELS. THE ALL-ROUNDER W 735R. EXAMPLE FITTING: Because it's your decision if you want fabric or panels. OCTAwall 60 Hybrid means more

More information

Wireless Access Controlled Door Solution

Wireless Access Controlled Door Solution Wireless Access Controlled Door Solution Solution family: Interior Door Solution Solution group: Single-Wood-Self Closing- Access Control Description The ASSA ABLOY Belgium solution for high security interior

More information

Architect: A.D.H. Photography: DR TECHNAL FY 65 WINDOW

Architect: A.D.H. Photography: DR TECHNAL FY 65 WINDOW Architect: A.D.H. Photography: DR TECHNAL FY 65 WINDOW Architect: Manuelle Gauterand Photography : Vincent Fillon FY 65 window, A range of different solutions Architect: W Architectures Photography: DR

More information

Roto NT The world s biggest selling Tilt&Turn hardware system for windows and balcony doors

Roto NT The world s biggest selling Tilt&Turn hardware system for windows and balcony doors Window and door technology Roto NT The world s biggest selling Tilt&Turn hardware system for windows and balcony doors For aluminium profiles with 16 mm hardware groove Convincingly good windows With surprisingly

More information

Desk-top cases b. Flexible expansion options, for 19" components e.g. plug-in unit units, or for individual expansion

Desk-top cases b. Flexible expansion options, for 19 components e.g. plug-in unit units, or for individual expansion Overview... 0 Cainets... 1 Desk-top cases Wall mounted cases... 2 Accessories for cainets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 02004009 Suracks/ 19" chassis... 6 Front panels,

More information