TITGEMEYER Tf1438GB(0813)1. GETO EasyConn Next Generation The complete 24 V lighting system for trailers and trucks

Transcription

1 TITGEMEYER GETO EasyConn Next Generation The complete 4 V lighting system for trailers and trucks

2 All rights reserved. The technical data quoted in this catalogue, performance descrip - tions, recommendations and instructions e.g. for the installation of the components available from us, are without liability. These are based on our experience. Claims against us as a consequence are expressly excluded as much of the application of our goods remains outside our direct influence. It is a fundamental obligation of the user to ascertain and to decide wether the goods provided by us are appropriate for a particular application. This catalogue is our intellectual property! Disclosure to third parties is prohibited. Reproduction even in part as well as use of our illustrations and TITGEMEYER part-numbering systems is only permitted with our express permission in writing. Subject to change. Supply of goods is in conformity with our delivery and payment conditions. Gebr. TITGEMEYER GmbH & Co. KG Osnabrück

3 Contents GETO EasyConn ighting system General description... 4 Pre-manufactured GETO Fender underrun protection system... Pre-manufactured lamps and cable sets GETO EasyConn Next Generation... 0 Pre-manufactured lamps and cable sets GETO EasyConn - the proven system... 4 Pre-manufactured cable management + distributor GETO EasyConn - the proven system... 8 Underrun components... 0 ighting components Rear lighting... ighting components Side lighting ighting components Front lighting... 4 ighting components Cable sets ighting components Auxiliary PG distributor, ready-to-connect... ighting components Cable management and distributor, completely pre-manufactured... 3 ighting components Accessories... 4 ighting components Plugs and sockets... 9 Connector assignment... 3 egal requirements... Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 3

4 GETO EasyConn ighting system General description The cabling of trucks and trailers should be quick and simple to execute. Operational reliability in daily operations is a must. This is precisely what the new TITGEMEYER lighting system EasyConn has to offer.. Distributor Optional extra functions Quick-ink cabling system This cost-efficient cabling and lighting system dispenses with a distributor box: distribution is implemented using a rear adaptor cable, utilising the process-sure EasyConn connector system. The minimised plug and jack diameters make it even easier to fit to the trailer. The connection assemblies have been tested in accordance with Safety Classification IP K9K. In order to meet individual requirements and provide additional functionality, PG distributors, Y cable, intermediate adaptors and helical main supply lines can be integrated into this system. These modular cabling options will meet the requirements of almost any con ceivable trailer application. The Quick-ink cabling system provides a method of joining cable and lamp connectors together quickly and easily. amps with Quick-ink cables have a coupler at the cable end, which is designed to be connected at the required position to a flat cable by means of a clamping piece. A crimping pliers is required for assembly. Insert the coupler over the flat cable......secure by means of the black clamping piece......and squeeze together using the crimping pliers! The entire system, including both the cabling and the individual components, meets the requirements of German and EU regulations on road transport of hazardous goods. (Exception: adapter cables with N/S connectors) (See page 8 for further information on these requirements). 4 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

5 GETO EasyConn ighting system General description GETO Fender EG mudflap mounting frame fitted with partial ED lights GETO Fender EG mudflap mounting frame equipped with lamps Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/

6 GETO EasyConn ighting system Pre-manufactured GETO Fender underrun protection system fitted with partial ED lights GETO Fender EG underrun protection system with screw console fitted with partial ED lights Included with delivery completely equipped Underrun protection system with two end caps, two multi-function lights with integrated marker lights and one number plate light complete with cable: marker light, rear light, brake light and number plate light all EDs. All other functions with bulb holders. Optional extra: one or two additional reversing lights Part No (page 3) a second ED number plate light GETO Fender EG underrun protection system completely equipped Page from 0 Description Underrun protection system, made of steel, for all weight classifications Material high-strength steel Surface Final powder coat in white RA 900 Weight [kg/each].0 Part No Other RA colours available on request GETO Fender EG underrun protection system Individual parts Page 38 0 Quantity Rear light, right Rear light, left Number plate light Underrun protection system End cap Description Weight [kg/each] Part No Underrun protection system accessories Page Description ength [mm] Material Surface Weight [kg/each] Part No. Console S 3 MC S 3 JR S 3 MC KT coated, black KT coated, black raw Type approval mark e The foil type plate has a protective foil which may be removed after finishing. Surface treatment of the frame surface is carried out after the provision of the openings. Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

7 0 a 00 R-S 0 IIIA F 8 8 E 4 TOP 00- E 300 TOP R F 0 a F 00 0 IIIA 8 0 a R-S GETO EasyConn ighting system Pre-manufactured GETO Fender underrun protection system fitted with partial ED lights 3 >PMMA< a F >PMMA< TOP E 4 TOP TOP R 39 GETO Fender EG underrun protection system completely equipped (Part No ) Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

8 GETO EasyConn ighting system Pre-manufactured GETO Fender underrun protection system equipped with lamps GETO Fender EG underrun protection system with screw console Complete, cabled and equipped with lamps Included with delivery Underrun protection system with two end-caps, two multi-function lights with flange-mounted sidelights (bulbs included) and two registration plate lights, with wiring Optional: two additional reversing lights Part No GETO Fender EG underrun protection system completely equipped Page from 0 Description Underrun protection system, made of steel, for all weight classifications Material high-strength steel Surface Final powder coat in white RA 900 Weight [kg/each].0 Part No. 0 3 Other RA colours available on request GETO Fender EG underrun protection system Individual parts Page Quantity Rear light, right Rear light, left Number plate light Underrun protection system End cap Description Weight [kg/each] Part No Underrun protection system accessories Page Description ength [mm] Material Surface Weight [kg/each] Part No. Console S 3 MC S 3 JR S 3 MC KT coated, black KT coated, black raw Type approval mark e The foil type plate has a protective foil which may be removed after finishing. Surface treatment of the frame surface is carried out after the provision of the openings. 8 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

9 GETO EasyConn ighting system Pre-manufactured GETO Fender underrun protection system equipped with lamps , GETO Fender EG underrun protection system completely equipped (Part No. 0 3) Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 9

10 GETO EasyConn ighting system Pre-manufactured lamp and cable sets GETO EasyConn Next Generation /4..3 /. /./ TOP >PMMA< / TOP 8./8. TOP R Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

11 GETO EasyConn ighting system Pre-manufactured lamp and cable sets GETO EasyConn Next Generation System overview GETO EasyConn Next Generation Adapter cables for trailers Pos. Description Cable length [mm] Weight [kg/each] Part No. Page. Cablel x -core with sockets, -pin, ISO 8/33 Cable core, with plug, -pin, ISO Adapter cables for articulated trailers Pos. Description Cable length [mm] Weight [kg/each] Part No. Page..3 Cable x -core, with sockets, -pin, N/S, ISO 8/33 Cable core, with socket, pin, ISO Main supply cables for adapter cables Pos. Description Cable length [mm] Weight [kg/each] Part No. Page. -core, both sides with pin plug with ribber sleeve, with an extra two-pin cable outlet, 00 mm, with guard cap 8-core, both sides with pin plug with ribber sleeve, for adaptor cables; without output for special or additional functions Rear adaptor cable Pos. Description Cable length [mm] Weight [kg/each] Part No. Page 3 EC NG with a jack for connection to the main supply line, right-angle connectors - -pole 00 / Flat lead, -pole, for SM, additional front and rear lights Pos. Description Cable length [m] Weight [kg/each] Part No. Page 4 4. Connection cable, with EC NG right-angle connector Connection cable, Supplied on rolls, without plug Auxiliary distributor (optional) Pos. Description Cable length [mm] Weight [kg/each] Part No. Page...3 Auxiliary PG distributor Y cable, -pole Front distributor Quick-link lead, -core Switching device for ED lights Connection adaptor cable OD/NEW, -core x 00 x00 ohne ohne Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

12 GETO EasyConn ighting system Pre-manufactured lamp and cable sets GETO EasyConn Next Generation Front lighting (white) Page Pos. Description Cable length [mm] Weight [kg/each] Part No Periphery (limit) lamps, complete, r. and l. in dr. dir., ED technology Side lighting (amber) Page Pos. Description Cable length [mm] Weight [kg/each] Part No Side marker lamps with reflectors, r. + l. in dr. dir., built-in version, ED technology Side marker lamps with reflectors, r. + l. in dr. dir., Top-mounted version (with holder), ED technology Side marker lamps with reflectors, r. + l. in dr. dir., bottom-mounted version (with holder), ED technology Side marker lamps with reflectors, r. + l. in dr. dir., built-in version, ED technology, for EC NG Rear lighting (red) Page Pos. Description Cable length [mm] Weight [kg/each] Part No Rear lamp with contour light, right; Part-ED technology Rear lamp with contour light, left; Part-ED technology Rear lamp with SMR, right, Part-ED technology Rear lamp with SMR, left, Part-ED technology Full-ED marker light with contour light, right Full-ED marker light with contour light, left icense plate lamp; ED technology Additional reversing backlight EC NG Periphery lamp red/white/amber, right, ED technology EC NG Periphery lamp red/white/amber, left, ED technology EC NG Periphery lamp red/white/amber, ED technology EC NG Auxiliary rear light, ED technology Miscellaneous /Accessories Page Pos. Description Cable length [mm] Weight [kg/each] Part No ED safety brake light EC NG Reversing alarm, EC NG Warning beacon Adaptor socket for warning beacon Protective housing for EC NG rear light Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

13 Notes Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/

14 TOP TOP GETO EasyConn ighting system Pre-manufactured lamp and cable sets GETO EasyConn the proven system GETO EasyConn The proven system with completely pre-manufactured lamps / / /3./ /3.3/ Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

15 GETO EasyConn ighting system Pre-manufactured lamp and cable sets GETO EasyConn the proven system Rear lighting (red) Pos. Description Cable length [mm] none none none none none none Weight [kg/each] Part No. Page Rear lamp with contour light, right Rear lamp with contour light, left Rear lamp with contour light, right; Part-ED technology Rear lamp with contour light, left; Part-ED technology Rear lamp with SMR, right Rear lamp with SMR, left Compact marker light, right-side Compact marker light, left-side Full-ED marker light, right-side Full-ED marker light, left-side Periphery lamp red/white/amber, right Periphery lamp red/white/amber, left Periphery lamp red/white/amber, right; ED technology Periphery lamp red/white/amber, left; ED technology Periphery lamp red/white/amber; ED technology Periphery lamp red/white/amber, right Periphery lamp red/white/amber, left Periphery lamp red/white/amber, left Periphery lamp red/white/amber, right icense plate lamp icense plate lamp; ED technology Additional reversing backlight Auxiliary rear light Auxiliary rear light ED rear fog light Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

16 GETO EasyConn ighting system Pre-manufactured lamp and cable sets GETO EasyConn the proven system Side lighting (amber) Page Pos. Description Cable length [mm] Weight [kg/each] Part No Side marker lamps with reflectors, r. + l. in dr. dir., built-in version, ED technology Side marker lamps with reflectors, r. + l. in dr. dir., Top-mounted version (with holder), ED technology Side marker lamps with reflectors, r. + l. in dr. dir., bottom-mounted version (with holder), ED technology Front lighting (white) Page Pos. Description Cable length [mm] Weight [kg/each] Part No Periphery (limit) lamps, complete, r. and l. in dr. dir., ED technology Periphery (limit) lamps, complete, r. and l. in dr. dir., Top-mounted version, ED technology Flat lead, -pole, for SM, additional front and rear lights Page Pos. Description Cable length [mm] Weight [kg/each] Part No Connection cable, Supplied on rolls, without plug Connection cable, with plug Main supply cables and adapter cables from page 43 onwards Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

17 Notes Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/

18 GETO EasyConn ighting system Pre-manufactured cable management and distributor GETO EasyConn the proven system 0 3/3. /. 0 9/9./ /./. 8 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

19 GETO EasyConn ighting system Pre-manufactured cable management and distributor GETO EasyConn the proven system Select your completely pre-manufactured individual product from: Adapter-eitungen für Anhänger Pos. Description Cable length [mm] Weight [kg/each] Part No. Page 0 Cablel x -core with sockets, -pin, ISO 8/33 Cable core, with plug, -pin, ISO Adapter cables for articulated trailers Pos. Description Cable length [mm] Weight [kg/each] Part No. Page 3 Cable x -core, with sockets, -pin, N/S, ISO 8/33 Cable core, with socket, pin, ISO Main supply cables for adapter cables Pos. Description Cable length [mm] Weight [kg/each] Part No. Page core, both sides with pin plug with ribber sleeve, with an extra two-pin cable outlet, 00 mm, with guard cap 8-core, both sides with pin plug with ribber sleeve, for adaptor cables; without output for special or additional functions Helical main supply line (optional) Pos. Description -lead cable, one side with a -pin plug, the other with a -pin jack Cable length [mm] 3000 Weight [kg/each].0 Part No. Page Rear adaptor cable Pos. Description Weight [kg/each] Part No. Page.. With a jack for connecting to the main supply line, -pin plugs, x -pin jacks With a jack for connecting to the main supply line, -pin plugs, x -pin jacks With a jack for connecting to the main supply line, -pin plugs, 3 x 3 -pin jacks Auxiliary distributor (optional) Pos. Description Cable length [mm] Weight [kg/each] Part No. Page Auxiliary PG distributor Y cable, -pole Intermediate adapter, x tail light function Intermediate adapter, x tail light function, x brake light function Intermediate adapter, x additional reversing light function Front distributor Y splitter cable, -core Quick-link lead, -core Switching device for ED lights x 00 x ohne Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 9

20 GETO EasyConn ighting system Underrun components Underrun protection device with hole pattern GETO Fender EG underrun protection system with hole pattern for EasyConn lighting and wiring system For own installation of the lighting and wiring system The surface treatment is applied after the holes have been drilled Items supplied Underrun protection system GETO Fender EG underrun protection system with hole pattern Description Material Surface Weight [kg/each] 3. Part No. Underrun protection, steel high-strength steel Other RA colours available on request Final powder coat in white RA Underrun protection system accessories Description ength [mm] Brackets (see page ) Material Surface Weight [kg/each] Part No. S 3 MC S 3 JR S 3 MC KT-coated, black KT-coated, black raw The pattern of holes in the support is designed for the installation of: Marker lights with bulb holders [Part No. 0 / 04 / 0 / 04 (page 3)] Marker lights with partial ED function [Part No. 03 / 03 (page 39) / 00 / 0 / 00 / 0 (page )] Marker lights with full ED function [Part No. 04 / 04 (page 8)] Registration plate illumination lights with bulb holders [Part No. 00 (page 38)] Registration plate illumination lights with ED function [Part No / 03 (page 38)] Optional reversing lights [Part No (page 3) / 4 00 (page 3)] Screw brackets for attachment to the chassis, compatible with various longitudinal support centre clearances Type-approval sign e as per European Directive 00/0/EC. The foil type approval plate is covered with a protective film, which can removed after the finish has been applied. The surface finish of the support is applied after the holes have been drilled. The type approval sign applies only to the device as a whole (i.e. the support with brackets) 0 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

21 GETO EasyConn ighting system Underrun components Underrun protection device with hole pattern Hole pattern for underrun protection support,9 ø, ø x 00 ø, 0 33, 4 x ø, b A 8,4 4 c d 4 9, c d () () 0 c d 4 9,4 ±, 4 x ø, 3,4 R b A A c d ø, 9,,9 4 x 00, 0 x ø, Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

22 GETO EasyConn ighting system Underrun components Brackets for underrun protection device Brackets for attaching the chassis to the underrun protection support x 0 (=30) Brackets for underrun protection support Description ength [mm] Material Surfase Weight [kg/each] Part No. Bracket S 3 MC KT-coated, black raw Other surfaces available on request ø 3 Brackets for supports S and EG Description ength [mm] Material Surface Weight [kg/each] Part No. Bracket S 3 JR KT-coated, black Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

23 GETO EasyConn ighting system Underrun components Brackets for underrun protection device TITGEMEYER rear underrun protection devices are tested and approved as free-standing technical items in accordance with European Directive 0//EEC of , including all changes as per Amendment Directive 00/0/EC for vehicles with a total mass (total weight) of up to 0 tonnes. Type approval marks have been issued by the German Federal Motor Transport Authority (KBA) in this respect. We will be pleased to provide copies of the expert reports on request. A device consists of one support, two brackets and two support end-caps. The supports carry the mark of approval in the form of a selfadhesive sign covered with protective film. The protective foil can be removed after the finish has been applied to the device and/or vehicle. Please note that the type approval sign applies only to the device as a whole (i.e. the support with brackets). max. 4, e ,4 max. 30 max x 0 (= 30) max ,4 max. EC type-approval mark as per SK 004, 4 Underrun protection support EC type approval mark with protective film Underrun protection support, steel, ,4 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 3

24 GETO EasyConn ighting system Underrun components Rear flap for underrun protection device Rear flap for underrun protection device Rear mudflap is made of a synthetic material that does not distort but is flexible Outer surface is dirt repelling and can withstand high pressure cleaning Your own special logo on request Mounting on steel underrun protection device: The mounting frame with rear mud flap inserted is screwed or riveted to the lower rail of the underrun protection device. 0 Rear mudflap mounting on steel underrun protection device x ø Mudflap for underrun protection device Description ength x height [mm] Material Surface Weight [kg/each] Part No. Mudflap with traffic sign Mudflap plain Mounting rail 300 x x x 0 Synthetic material Synthetic material Synthetic material black black black Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

25 GETO EasyConn ighting system Underrun components End cap for underrun protection device End cap for underrun protection device support Scope of delivery: end cap (Part No ), packed in polythene bag, fastener elements included, four TIFAS clic rivets, ø mm, shaft length 8. mm (Part No ) Material and colour: End cap plastic, PA, black TIFAS clic rivet PA. A 3 K, black Weight: approx. 0. kg/each Part No Plate thickness approx. 3 mm Perimeter outside radius R 3 all holes: ø.0 mm Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

26 GETO EasyConn ighting system Underrun components Fixings for underrun protection device TIFAS split rivet of synthetic material mounting from one side with thumb pressure, for a variety of applications. In accessible or difficult to get-at components, e.g. for securing coverings, type plates and instruction plates or cover plates of all types. TIFAS split rivets are made of non-conducting, tough, flexible and corrosion-free material and are low-weight. The smooth, wide head covers the split rivet to the out side and provides an optically pleasing finish. Material: PA. A 3 K Temperature tolerance: constant 0 C Part No s d d k Insert TIFAS split rivet into opening Thumb pressure on the head of the rivet completes the process Finished TIFAS split rivet Cable ties Bezeichnung Width [mm] ength [mm] ength [mm] Material Colour Part No. Kabelbinder Synthetic material Synthetic material white white B = Overall length = length, milled section (effective reach) Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

27 GETO EasyConn ighting system ighting components Rear lighting Modular multi-functional hybrid light EC-NG 4 volts Partially fitted with ED lights With integrated, horizontally-mounting triangular-shaped rear lamp, with -pole recessed rear adaptor plug for rear adaptor cable, plus four -pole plugs for reversing, side marker, number plate and marker lights or other functions. With flange-mounted marker light and integrated side marker light. ED functions: marker, rear and brake light (integrated into triangular-shaped rear lamp). All other functions with bulb holders. With patented electronics to handle malfunctions. Weight:. kg Part No right left Rear fog lamp Rear light / Brake light Flashing indicators Reversing lamp Rear light Position and side marker lamps Front , Back left 8, 38 ø 4, Modular multi-functional hybrid light EC-NG 4 volts Partially fitted with ED lights With integrated, horizontally-mounting triangular-shaped rear lamp, with -pole recessed rear adaptor plug for rear adaptor cable, plus four -pole plugs for reversing, side marker, number plate and marker lights or other functions. With flange-mounted side marker light. ED functions: side marker, rear and brake light (integrated into triangular-shaped rear lamp). All other functions with bulb holders. With patented electronics to handle malfunctions. Weight:.8 kg Part No right left Rear fog lamp Reversing lamp Rear light / Brake light Flashing indicators Rear light Side marker lamp (see page 4, Part No. 3 00) Front ø 4, 38 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

28 GETO EasyConn ighting system ighting components Rear lighting Rear fog lamp Rear light / Brake light Flashing indicators Modular multi-functional full-ed EC-NG rear light, 4 volts With integrated, horizontally-mounting triangular-shaped rear lamp, with -pole recessed rear adaptor plug for rear adaptor cable, plus four -pole plugs for reversing, side marker, number plate and marker lights or other functions. With flange-mounted marker light and integrated side marker light. With patented electronics to handle malfunctions. Weight:.0 kg Part No right left Reversing lamp Rear light Position and side marker lamps Front supplied loose for use as spare parts: Patented lamp lens can be used with all lamps Identical construction and sides Part No Back right , 8, 38 ø 4, Rear view left + right Configuration: -pole outputs Right Standard version eft Rear light Rear light Plug concept: Plugs can be readily switched within rear light O = no cover flap, bare terminal Cover flap supplied loose for use as spare part: Part no Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

29 GETO EasyConn ighting system ighting components Rear lighting ED module for indicator Part No ED module for reversing lamp Part No ED module for rear fog lamp Part No Modules can be used on either or both sides. EDs can be retrofitted to replace bulbs. No special tools required. Protective housing for modular EC-NG multi-functional hybrid rear light To be used when compulsory to protect the terminals against stone chipping, dirt, water and ice. Slotted holes provided for cable guide. Installation depth of right-angle connectors incl. cover flap approx. 90 mm. Weight: 0.0 kg Part No PP Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 9

30 TOP GETO EasyConn ighting system ighting components Rear lighting Reversing lamp Rear light Flashing indicators Full-ED marker light, 4 V With integrated triangular reflector for horizontal installation, 00 mm cable with -pole rear adapter plug - cable moulded on. All lighting functions based on ED technology. The lamp lens is firmly stuck to the housing. The left-hand light has an additional -pole plug fitted to its cable for the connection of a rear fog light. Weight:. kg Part No. 0 right 0 left Note The corresponding switching device (Part no ) must be used with the full-ed marker lights (see page ). Non-illuminated Rear light / Brake light Illuminated ED 403, 8, 33, , 30 4 Marker light, 4 V in partial-ed configuration Round design with integrated triangular reflector for horizontal installation, with rear-facing -pole plug connector for the rear adapter cable and -pole plug with cover flap for additional reversing-lamp function, with a flange-mounted sidelight with integrated side-marking light. ED lighting function: sidelight and tail light (integrated into the triangular reflector) Reversing lamp Rear light Flashing indicators Weight:.0 kg Part No. 03 right 03 left Rear fog lamp Rear light Brake light Position and side marker lamps 30 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

31 GETO EasyConn ighting system ighting components Rear lighting 4-volt rear lamp With integrated triangular rear projector for horizontal fitting, with rear -pin plug connection for the rear adaptor cable, as well as a -pin plug with cover cap for the extra reversing lamp function. Optionally available with a flanged contour light with integrated side marker lamp, or without a contour light with but an integrated side marker lamp. Version with flanged contour light: Rear fog lamp Weight:,3 kg Part No. 0 right 0 left Rear light Flashing indicators Reversing lamp Rear light Brake light Position and side marker lamps Version with integrated side marker lamp: Weight:.03 kg Part No. 04 right 04 left Rear light Side marker lamps Flashing indicators Spare parts for periphery lamp ens right Part No ens left Part No ens SM Part No Rear fog lamp Rear light Reversing lamp Brake light Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 3

32 GETO EasyConn ighting system ighting components Rear lighting Compact marker light, 4 V Compact design for trailers with limited installation space (e.g. dropside vehicles), with integrated triangular reflector for horizontal installation, 00 mm cable with moulded-on -pole plug connector for the rear adapter cable, left-hand configu ration with downward-facing registration plate light Weight: 0.9 kg Part No. 0 right 0 left Rear fog lamp Rear light / Brake light Side marker lamps Reversing lamp Registration plate lamp (for left-hand configuration only) Rear light Flashing indicators ED safety brake light Can be fitted horizontally or vertically; red light lens and end caps; end caps and jacks supplied loose. ength of cable: 00 mm with -pole EC NG right-angle connector to connect to EC NG rear light. 4 volts,.4 watts. Weight: 0.0 kg Part No ,8 0 3 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

33 GETO EasyConn ighting system ighting components Rear lighting ED contour light red/white/yellow EC NG Fitting materials not supplied With double-chamber system and sealed-on light unit; with integrated side marker light. Steel spring incorporated in rubber arm guarantees accurate positioning, flexibility and impact resistance. 00 mm cable with -pole EC NG right-angle connector for connection to the EC NG rear light. Weight: 0.30 kg Part No right 3 00 left TOP E 4 39 SM A R TOP, E 4 0 3,8 >EPDM< SM A R GGVS 3 A ED Contour light red/white/yellow Without fitting materials With double-chamber system and sealed-on light unit; with integrated side marking light. The steel spring in the rubber arm guarantees accurate positioning, flexibility and impact-resistance. 00 mm cable with Quick ink coupling for connection to the flat lead. Weight: 0.3 kg Part No. 00 right 00 left Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 33

34 GETO EasyConn ighting system ighting components Rear lighting ED contour light red/white/yellow Fitting materials not supplied With double-chamber system and sealed-on light unit; with inte grated side marker light. Short rubber arm can be used on the left or right. 00 mm cable with -pole EC NG right-angle connector for connection to the EC NG rear light. Weight: 0.3 kg Part No C Direction of travel C C-C , 00 ED Contour light red/white/yellow Without fitting materials With double-chamber system and sealed-on light unit; with integrated side marking light. With short rubber arm, for leftor right-hand use. For lateral installation on vertical surfaces. 00 mm cable with Quick ink coupling for connection to the flat lead. Weight: 0.40 kg Part No , 34 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

35 GETO EasyConn ighting system ighting components Rear lighting Contour light red/white/yellow Without fitting materials With a double chamber system, including integrated side marker lamp. The steel spring integrated in the rubber arm guarantees positioning precision, flexibility and impact-resistance. 000 mm cable with Quick-ink coupling for connection to the flat cable. To be installed facing upwards only. Weight: 0.9 kg Part No right 00 left For replacement needs: Spare glass ø Contour light red/white/yellow Without fitting materials With a double chamber system, including integrated side marker lamp. The steel spring integrated in the rubber arm guarantees positioning precision, flexibility and impact-resistance. 00 mm cable with -pole EasyConn plug for connection to the rear adapter cable, to be installed facing upwards only. Weight: 0.40 kg Part No right 9 00 left Contour light red/white/yellow For lateral upright installation (horizontal) Without fitting materials With double-chamber system and sealed-on light unit, with integrated side marking light. The steel spring in the rubber arm guarantees accurate positioning, flexibility and impact-resistance. 00 mm cable with Quick ink coupling for connection to the flat lead. ighting method: bulb Part No right left ø, 8,, 04, 3 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 3

36 GETO EasyConn ighting system ighting components Rear lighting Additional UTRA Beam H 3 reversing lamp The use of halogen lamp technology combined with H3 lighting, 4 volts, 0 watts, provides extremely high and intense illumination of the rear area when reversing and parking Its compactness keeps it well-protected when installed in the underrun protection system Vertical tilt: Included with delivery: all mounting components, easy installation Approval: E 300 Cable length: 000 mm with fitted -pole EC NG rightangle connector to connect to the EC NG rear light on the right or left-hand side facing the direction of travel ight bulbs: H3, 4 volts, 0 watts Weight: approx. 0. kg/each Material: Reversing lamp housing made of synthetic material All metal parts galvanized Colour: Black Part no TOP 00- E 300, max. 9,3 A 3 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

37 GETO EasyConn ighting system ighting components Rear lighting Auxiliary reversing lamp Comet 40 (Pos. ) The Micro FF technology in association with the light source H3, 4 V, 0 W provides extremely high and intense illumination or the rearward space in ranging yard manoeuvres The compact construction facilitates secure, protected installation in the underrun protection device Included with delivery: all mounting components, plug, simple assembly Authorization: (E) 8 Cable length: 000 mm amp complement: H3, 4 Volt, 0 Watt Weight: approx. 0. kg/each Material: reversing lamp housing of synthetic material, all metal parts galvanized Colour: black Part No. Cable length 000 mm , shown without mounting parts Mounting in the mudflap mounting frame can be either left or right in drive direction or left and right ( units). The drillings relating to detail, are provided for this, see page 9. The cable ends are fed through one of the long openings and fixed watertight into the plug housing, guide ring and locknut. 4 ED rear fog light For lighting systems with full-ed marker lights; with complete wiring, 00 mm long, plug, for connection to the -pole socket of the left-hand full-ed marker light. Weight:.0 kg Part No M 3, 00, Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 3

38 GETO EasyConn ighting system ighting components Rear lighting, Number plate lamp with 00 mm cabling complete, plug and screw fixings, light source 4 V, right and left in drive direction. Weight: 0. kg Part No ø 0 ø, ED Number plate lamp with 00 mm cabling complete, plug and screw fixings, right and left in drive direction. Weight: 0. kg Part No , ED number plate light EC NG fully-wired, 300 mm long with -pole EC NG right-angle connector to connect to the EC NG rear light on the right or left-hand side facing the direction of travel; only one light is required if fitted on the side to illuminate a 0 mm wide number plate; with 4 EDs, watt Weight: 0. kg Part No E Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

39 GETO EasyConn ighting system ighting components Rear lighting Auxiliary rear lamps mounting red, e.g. in rear access opening or tailgate, with Quick-link connector on cable, 000 mm, with ED, 4 V, right and left in drive direction Weight: 0.30 kg Part No V V ø 4, mm 3 9 Auxiliary rear lamps mounting red, with complete Quick-ink connector on cable, 000 mm, with ED, 4 Volt, right and left in dr. dir. Weight: 0. kg Part No ø 4, mm Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 39

40 GETO EasyConn ighting system ighting components Side lighting Side marker lamps mounting amber, with reflector, with complete Quick- ink connector on cable, with ED 4 V, right and left in drive direction Weight: 0.09 kg Part No mm Weight: 0.0 kg Part No mm Part No mm V 3 ø 4, (300) mm 9 38,4 Universal angle bracket for underside installation of side marking light, Part No. 3, the light can be fitted on either side Part No , 43,3 Clip-type angle bracket for underside installation of side marking light, Part No. 3, drill clearance of fixing holes on underside 34. mm; plate thickness 4 mm; Drilling diameter 3. mm Part No , 84, 4, 4 Side marker lamps mounting amber, with reflector, with complete Quick-ink connector on cable, with ED 4 Volts, right and left in drive direction Weight: 0.3 kg Part No mm 00 mm 4 38,4 39 Synthetic material holder for under body mounting Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

41 GETO EasyConn ighting system ighting components Side lighting ED side marker light EC NG, mounting yellow, with reflector, fully- wired, 00 mm long with -pole EC NG right-angle connector to connect to the EC NG rear light on the right or left-hand side facing the direction of travel; with 4-volt ED Weight: 0.09 kg Part No A A-A, ±0, P3/B D0 83 >PMMA< TOP TOP 30 ±0,3 00 ±0, IA E 039 SM E 0039 TMK 3 DOT SAE AP 0 A Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 4

42 GETO EasyConn ighting system ighting components Front lighting Periphery (limit) lamps mounting Transparent glass, with complete Quick-ink connector on cable, 000 mm, with ED, 4 Volt, right and left in dr. dir. Weight: 0. kg Part No ø 4, 000 mm 48 Periphery (limit) lamps mounting Transparent glass, with complete Quick-ink connector on cable, 000 mm, with ED, 4 Volt, right and left in dr. dir. Weight: 0.0 kg Part No mm Weight: 0.30 kg Part No mm ø 4, 4 (300 mm) 000 mm Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

43 GETO EasyConn ighting system ighting components Cable sets Adapter cables for trailer to tractor unit, connection on one side to main supply cables with plug, guide ring and locknut. Cable, x core, 3.00 mm long, with plugs, way N/, ISO 8/33 Weight:.90 kg Part No N , S 88 8, 300 Plug and socket connections, see page 3 Adapter cables for trailer to tractor unit, connection on one side to main supply cables with plug, guide ring and locknut. Cable way, plug, pin, ISO 098 Weight:. kg Part No Plug and socket connections, see page 3 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 43

44 GETO EasyConn ighting system ighting components Cable sets Adapter cables for articulated trailers to tractor unit, connection on one side to main supply cables with plug, guide ring and locknut. Cable, x core, 00 mm long, with plugs, way N/, ISO 8/ Plug and socket connections, see page 3 Cable length [mm] Weight [kg/each].00. Part No Adapter cables for articulated trailers to tractor unit, connection on one side to main supply cables with plug, guide ring and locknut. Cable way, plug, pin, ISO 098 ø 8, Plug and socket connections, see page 3 Cable length [mm] Weight [kg/each] Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

45 GETO EasyConn ighting system ighting components Cable sets Main power leads for adapter cables, core, both sides way plug, with an extra -pin outlet on one side for steady plus Plug and socket connections, see page 3/4 Cable length [mm] Weight [kg/each], 4,00 4,90,0 Part No Main supply cables 8-core for adaptor cables; -pole plugs on both ends; without output for special or additional functions Weight:.4 kg Part No mm Weight:.8 kg Part No mm Weight:.3 kg Part No mm = 000 Plug and socket connections frei not used 4 frei not used 3 frei not used frei not used frei not used 0 frei not used 9 frei not used 8 pink Rueckfahrlicht pink reversing light rot Bremslicht 4 red braun stop light Schlusslicht rechts 8R brown schwarz tail light right Schlusslicht links 8 black tail light left 4 3 weiss white Masse -8 ground -8 3 blau Nebelschlusslicht 4g blue rear fog light R gruen green Blinklicht rechts direction indicator right gelb yellow Blinklicht links direction indicator left Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 4

46 GETO EasyConn ighting system ighting components Cable sets Helical main supply line -lead, one side with a -pin plug, the other side with a -pin jack, 3000 mm effective length. For variable system lengths Weight:.0 kg Helix diameter: 0 mm ength: 00 mm Part No Plug and socket connections frei not used 4 frei not used 3 frei not used frei not used frei not used 0 frei not used 9 frei not used 8 pink Rueckfahrlicht pink reversing light rot Bremslicht 4 red braun stop light Schlusslicht rechts 8R brown schwarz tail light right Schlusslicht links 8 black tail light left 4 3 weiss white Masse -8 ground -8 3 blau Nebelschlusslicht 4g blue rear fog light R gruen green Blinklicht rechts direction indicator right gelb yellow Blinklicht links direction indicator left 4 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

47 GETO EasyConn ighting system ighting components Cable sets Rear adaptor cable With a jack for connection to the main supply line, with two -pin plugs, for connection to the right and left rear lamps, with two -pin jacks on both the right and left sides for connecting the license plate lamp and the flat cable for the side marker or position lamps. Weight: 0.80 kg Part No Note: Cap for sealing the -pin Part No. 88 jacks (see page ) Plug and socket connections, see page 3/4 Rear adaptor cable With a jack for connection to the main supply line, with two -pin plugs, for connection to the right and left rear lamps, with one -pin jack on both the right and left sides for connecting the flat cable for the side marker or position lamps. Weight:.40 kg Part No Note: Cap for sealing the -pin Part No. 88 jacks (see page ) Plug and socket connections, see page 3/4 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 4

48 GETO EasyConn ighting system ighting components Cable sets Rear adaptor cable With a jack for connection to the main supply line, with two -pin plugs, for connection to the right and left rear lamps, with three -pin jacks on both the right and left sides for connection of the registration plate light, the flat cable for the side marking lights and the clearance lights Part No. 8/9 00 (see page 3) or other lights with tail- Weight: 0.80 kg Part No Plug and socket connections, see page 3/4 Rear adaptor cable EC NG With a jack for connection to the main supply line, with two -pole right-angle connectors to connect to an EC NG rear lights on the right or left-hand side; runs asymmetrically to the connection to the main supply line along the longitudinal supports. Cable length: 00 / 00 mm Weight:.0 kg Part No INKS RECHTS Plug and socket connections, see page 3/4 48 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

49 GETO EasyConn ighting system ighting components Cable sets ESK flat cable with right-angle connector to connect to the EC NG rear light; cable end with shrink tubing Part No mm mm mm 9000 / 000 / 000 ESK flat cable with plug, cable end with shrink tubing mm shrink tubing Part No Cable length [m] 0 3, 9 00* 000* * without plug Weight [kg/each] Part No Connection adaptor cable old / new -core, with -pole right-angle connector on both ends, connection lead to enable flat cable to be used with straight plugs when connecting to an EC NG rear light ength: 000 mm Weight: 0.0 kg Part No = 000 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 49

50 GETO EasyConn ighting system ighting components Cable sets 000 Connection lead -core, with -pole right-angle connector at one end, with other end bare. Connection lead for connecting -pole connector to an EC NG rear light ength: 000 mm Part No A 40 Connection line -lead, with a -pin plug on one side and an open cable end on the other side. Connection cable for the -pin outlet for the main supply line. ength: 3000 mm Part No ength: 000 mm Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

51 GETO EasyConn ighting system ighting components Auxiliary distributor, ready-to-connect Y cable EC NG With two plugs and one jack, -pole, for connection of a further -pole lead or connector ength: 00 mm Material: Plastic Colour: black Weight: approx. 0.3 kg Part No R g R weiss/braun Datenleitung CAN_ white/brown data core CAN_ weiss/gruen Datenleitung CAN_H white/green data core CAN_H weiss/rot Masse fuer Datenleitung white/red ground 4- weiss/blau Achslift white/blue axle lifting weiss/schwarz Sensor fuer Bremse white/black sensor for brake grau Bremsbelag-Sensor grey worn brake lining senor orange Dauerplus orange power supply pink Rueckfahrlicht pink reversing light rot Bremslicht red stop light braun Schlusslicht rechts brown tail light right schwarz Schlusslicht links black tail light left weiss Masse -8 white ground -8 blau Nebelschlusslicht blue rear fog light gruen Blinklicht rechts green direction indicator right gelb Blinklicht links yellow direction indicator left Intermediate adaptor -pin cable, 00 mm long, each side with one plug and one jack. With two -pin jack outlets, with a 300 mm long cable for additional constant lighting function. Weight: approx. 0. kg Part No Intermediate adaptor -pin cable, 00 mm long, each side with one plug and one jack. With two -pin jack outlets, with a 300 mm long cable. x -pole connection with tail-light function (brown) x -pole connection with brake-light function (red) Weight: approx. 0. kg Part No Intermediate adaptor -pin cable, 00 mm long, each side with one plug and one jack. With two -pin jack outlets, with a 300 mm long cable; With x additional reversing light function; for use with compact light Part no. 0/0 (see page 3). Weight: approx. 0. kg Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

52 GETO EasyConn ighting system ighting components Auxiliary distributor, ready-to-connect AUXIIARY PG distributor With -core cable, 00 mm long, with plug With -core cable, 00 mm long, with jack All functions can be accessed from this distributor. Height: 8 mm Material: Synthetic material, exceptional impact resistance Colour: black Weight: approx.0 kg/each Part No Plug and socket connections, see page 3 Front distributor With two plug sockets, -pole, N/S ISO 8/33 With one plug socket, -pole, ISO 098 With -pole socket at bottom for connection to main power lead Fixing-hole template: 4 x 4 mm Total assembled height: 34. mm Material: Synthetic material Colour: black Weight: approx.. kg/each Part No. 000 Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

53 GETO EasyConn ighting system ighting components Cable management and distributor, completely pre-manufactured Y splitter cable With -pole connection housing and two 0 mm-long leads with a -pole plug and -pole socket Weight: approx. 0.0 kg Part No Quick-link lead -core round lead, one end fitted with Quick ink connection or bare wires for connection of additional powered device to flat lead; 00 mm in length Weight: approx. 0.0 kg Part No length 00 mm length 00 mm Switch device / flasher control unit with -pole EasyConn plug connectors on both sides. Does not require own power supply. For lighting systems with full-ed lights, for the control of the ED flasher breakdown monitoring function Weight: approx..0 kg Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 3

54 GETO EasyConn ighting system ighting components Accessories 0 0 Reversing alarm for EC NG With -core connection lead and right-angle connector to connect to an EC NG rear light (additional reversing lamp); cable length: 000 mm. Standard loudness at 4 V: measured at a distance of. m at a height of.0 m +/-0. m: 3 db +- Weight: 0.0 kg Part No M ca. 0 ca Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

55 GETO EasyConn ighting system ighting components Accessories Fixing clip for Quick ink lamps Part No Mounting pliers Part No Heat shrink tubing for insulation of open ends of ESK flat cable, diameter 8 mm, length 30 mm Part No Connection set way for own configuration. Jack housing consisting of locknut, guide ring, rubber tube, plug housing and flat insertion sleeves Part No Jack housing Consisting of locknut, guide ring, rubber tube, plug housing and flat insertion sleeves und O-ring Part No Connection set way for own configuration. Jack housing Consisting of locknut, guide ring, rubber tube, plug housing and flat insertion sleeves Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

56 GETO EasyConn ighting system ighting components Accessories Plug housing Consisting of locknut, guide ring, rubber tube, plug housing and flat insertion sleeves and O-ring Part No Connection set way for own configuration Jack housing consisting of locknut, guide ring, rubber tube, plug housing and flat insertion sleeves Part No Plug housing Consisting of locknut, guide ring, rubber tube, plug housing and flat insertion sleeves and O-ring Part No Cover cap for -pin jack For sealing the -pin jack Part No Cover cap for -pin plug For sealing the -pin plug Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

57 GETO EasyConn ighting system ighting components Accessories HEA assembly spray Protects electrical/electronic parts and metals against short-circuiting due to wetness or moisture, and against mal - functions and corrosion Infiltrates moisture and forms a protective film Maintains conductivity and also increases the service life of treated parts Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

58 GETO EasyConn ighting system ighting components Plugs and sockets Warning beacon Rotaflex F Approved to DIN 4 0 Form A H warning beacon with black plinth and flexible socket bracket for the adaptor socket, maximum tilt: 90. With bulb; total power consumption: 4V / 0W = 3. A. Fulfils CISPR Class for radio disturbance characteristics (via cable), high-pressure washer resistant. Weight: 0.8 kg Part No X ± g 9 33 K-ROTAFEX R Glühlampe H 4V 0W DIN E 4 K 84 SAE,W CH 04 e Made in Germany 08 A ø 0 33 ø 4,+0, 8 ø 3 ø 3 Adaptor socket For H warning beacon for installation on side of vehicle, with 90 mm angle bracket. Installation height: 00 mm. Weight: 0.4 kg Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

59 GETO EasyConn ighting system ighting components Plugs and sockets Plug, -pin, metal, 4 V, conforming to ISO 8, contact 3 with contact sleeve Solid metal construction with screw-in terminals, load capacity x 0 A at 4 V, total length mm Material: Bright metal housing Weight: approx. 0. kg/each Part No R/ 3/ 8/ R /3 4/4 Plug socket, -pin, metal, 4 V, conforming to ISO 8, contact 3 with contact pin Solid metal construction with screw-in terminals Rubber gasket in sealing cap, including cable-protection bush, load capacity x 0 A at 4 V, total length mm Material: Bright metal housing Weight: approx. 0. kg/each Part No Plug, -pin, metal, 4 V, conforming to ISO 33, contact with contact pin Solid metal construction with screw-in terminals load capacity x 0 A at 4 V, total length mm Material: Bright metal housing Weight: approx. 0. kg/each Part No Plug, -pin, metal, 4 V, conforming to ISO 33 Contact with contact sleeve Solid metal construction with screw-in terminals, Rubber gasket in sealing cap, including cable-protection bush, load capacity x 0 A at 4 V, total length mm Material: Bright metal housing Weight: approx. 0. kg/each Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com 9

60 GETO EasyConn ighting system ighting components Plugs and sockets Spiral lead, -core, plastic, 4 V, conforming to ISO 8, with metal plugs, contact 3 with contact sleeve Configuration x. mm, length when stretched 4000 mm, diameter of spiral approx. 40 mm Material: PVC lead, bright metal plugs Weight: approx kg/each Part No Spiral lead, -core, plastic, 4 V, conforming to ISO 33, with metal plugs, contact with contact pin Configuration x. mm, length when stretched 4000 mm, diameter of spiral approx. 40 mm Material: PVC lead, bright metal plugs Weight: approx kg/each Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

61 GETO EasyConn ighting system ighting components Plugs and sockets ABS plug, -pin, ADR/GGVS, 4 V, conforming to ISO 38 plastic, with crimp connectors for standard lead x 4 and 3 x. mm, securely fixed by means of a metal clip, load capacity 0 A at 4 V, total length mm Material: Plastic housing, metal clip Weight: approx. 0. kg/each Part No ABS socket, -pin, ADR/GGVS, 4 V, conforming to ISO 38, plastic, with crimp connectors for standard lead x 4 and 3 x. mm, rubber gasket in sealing cap, load capacity 0 A at 4 V, total length mm Material: Plastic housing Weight: approx. 0.8 kg/each Part No ABS spiral lead, -core, plastic, 4 V, conforming to ISO 38, PVC lead with x ABS plastic plugs configuration 3 x. and x 4 mm, length when stretched 4000 mm, securely fixed by means of a metal clip Material: PVC lead, plastic plug, metal clip Weight: approx..38 kg/each Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com

62 GETO EasyConn ighting system ighting components Plugs and sockets Plug, -pin, ADR/GGVS, 4 V, conforming to ISO 098, plastic, with crimp connectors for standard lead and PUR lead (ADR/GGVS) 3 x.; 0 x. and x.0 mm, securely fixed by means of a metal clip. oad capacity 0 A at 4 V, total length mm Material: Plastic housing, metal clip Weight: approx. 0.3 kg/each Part No Plug socket, -pin, ADR/GGVS, 4 V, conforming to ISO 098, plastic, with crimp connectors for standard lead and PUR lead (ADR/GGVS) 3 x.; 0 x. and x.0 mm, rubber gasket in sealing cap, load capacity 0 A at 4 V, total length mm Material: Plastic housing Weight: approx. 0.0 kg/each Artikel-Nr Spiral lead, -core, ADR/GGVS, 4 V, conforming to ISO 098, PUR lead with x plastic plugs configuration x. and 3 x. mm, length when stretched 4000 mm, securely fixed by means of a metal clip, diameter of spiral 0 mm Material: PUR lead, plastic plug, metal clip Weight: approx..30 kg/each Part No Spiral lead, -core to x -core, 4 V, ISO 098 to ISO 8/33 one -pin plug and two -pin plugs, for connection of tractor vehicle with -pin socket to trailer with two -pin plug sockets, length when stretched 4000 mm, securely fixed by means of a metal clip, diameter of spiral 90 mm Material: PVC lead, plastic/metal plugs, metal clip Weight: approx..8 kg/each Part No Phone: +49 (0) 4/8-0 Fax: +49 (0) 4/ truckandtrailer@titgemeyer.com