TITGEMEYER TUK Sideline (0609)1

Transcription

1 TITGEMEYER TUK Sideline (0609)

2 SIDELINE Type II C Type II max max. 50 A L Telephone: +9 (0)5 /58-0 Telefax: +9 (0)5 / export@titgemeyer.com Gruppe G(0609)

3 SIDELINE Type II Side-protection device for commercial vehicles Type II fixing components Layout: supports, components for fitting under the chassis, hinged Complete equipment for vehicle Components Weight [complete/kg] A C Vertical support Horizontal rail Support Items supplied and spare parts Position Material Dimensions [mm] Norm Vertical support (component A) Items supplied with each group of components A A A 3 A A 5 A 6 Vertical support Socket pin Security string Spring plug Locknut Steel, Steel, Plastic Steel, Steel 8.8, Horizontal rail (component ) Items supplied with each group of components U 5 / / x 70 x , M x 65 M DIN 0 DIN 933 DIN Horizontal centre rail Horizontal side rail Washer Locknut Clip Special screw Washer Locknut Reinforcing plate Support (component C) Items supplied with each group of components Steel, Steel, Steel 8.8, U 35 / / 3 x 600 U 5 / 5 / x 00 M 0 x x x M 0 M x 70 3 x x.5 M 0 / 5 / 500 DIN 933 DIN 5 DIN 985 DIN 5 DIN C C C 3 C C 5 Reverse bench Washer Locknut Headed ush Steel, Steel 8.8, Plastic U 63 / 5 / 3 x 0 M 0 x x x M 0 DIN 933 DIN 5 DIN Gruppe G(0609) L Telephone: +9 (0)5 /58-0 Telefax: +9 (0)5 / export@titgemeyer.com

4 SIDELINE Type VA Stainless steel max max. 50 Type VA A vehicle construction max max A9 A A3 A 50 A A6 A A9 A A7 A A3 A8 L Telephone: +9 (0)5 /58-0 Telefax: +9 (0)5 / export@titgemeyer.com Gruppe G(0609)

5 SIDELINE Type VA Stainless steel Side-protection device for commercial vehicles Type VA Stainless steel fixing components Layout: suspension built-in, hinged Complete equipment for vehicle Components Weight [complete vehicle/kg] A Reversing fixture, installation by screw Accessory bag for component A U-profile vertical 700 mm U-profile vertical 50 mm (alternative) Items supplied and spare parts Position A A A 3 A A 5 A 6 A 7 A 8 A 9 Material Stainless steel A / 70 A A / 70 A / 70 A / 70 dacromet-coated A / 70 Dimensions [mm] Reversing fixture and accessory bag (component A) Items supplied with each group of components Reversing fixture Washer Locknut Lock washer Cap nut Plate Spring plug bolt U-profile (component ) Items supplied with each group of components Grid profile 700 mm Grid profile 50 mm Stainless steel Stainless steel.5 / 57 / 30 / 63 M 0 x 70 M 0 M 0 M x 35 0 x 70. / 50 / 60 / 700. / 50 / 60 / 50 Norm EN 0 EN ISO 7090 EN ISO 05 DIN 7 DIN 587 EN Gruppe G(0609) L Telephone: +9 (0)5 /58-0 Telefax: +9 (0)5 / export@titgemeyer.com

6 SIDELINE Type VA Steel /black powder coated Type V A max max. 50 A vehicle construction max. 350 A9 A9 A A A3 A A A3 A max A A3 A L Telephone: +9 (0)5 /58-0 Telefax: +9 (0)5 / export@titgemeyer.com Gruppe G(0609)

7 SIDELINE Type VA Steel /black powder coated Side-protection device for commercial vehicles Type VA Steel fixing components Layout: supports, suspension built-in, hinged Complete equipment for vehicle Components Weight [complete/kg] Steel, Steel, black powder coated A Reversing fixture Accessory bag for component A U-profile vertical Accessory bag for component Items supplied and spare parts Position Steel / Steel black powder coated Material Dimensions [mm] Reversing fixture and accessory bag (component A) Items supplied with each group of components A A A 3 A A 8 A Reversing fixture Washer Locknut Spring plug bolt Steel Steel 8.8, Steel, Steel, Steel 8.8, Steel, 3 / 59 / 50 / 5 M x 80 3 x x.5 M M x 35 x 90 U-profile and accessory bag (component ) Items supplied with each group of components Snap-in profile Headed bush Steel Plastic 3 / 50 / 50 / 698 Norm EN 0 EN ISO 7090 EN ISO 05 EN Gruppe G(0609) L Telephone: +9 (0)5 /58-0 Telefax: +9 (0)5 / export@titgemeyer.com

8 SIDELINE Rail components G H E G E E L Telephone: +9 (0)5 /58-0 Telefax: +9 (0)5 / export@titgemeyer.com Gruppe G(0609)

9 SIDELINE Rail components Side-protection device for commercial vehicles Rail components Profiles Position Material Dimensions [mm] Norm Weight [unit/kg] mill finish silver anodized black anodized E E F G G H Rail section End caps Fixing set Screwed plate (E) (E) Washer (E) Spring (E) Radius profile Radius profile Cap Radius section Plastic black Steel Steel Steel Steel Plastic black Plastic black x 8 x 8 M 8 x 8 EN x 7 x.6 EN ISO x x x.0 DIN Spare part Plastic pin for fixing end caps and ø7 00 Cap ,5 End cap ø7 3,5 9,3,3 Fixing set (Pos. F) ø 8 ø Gruppe G(0609) L Telephone: +9 (0)5 /58-0 Telefax: +9 (0)5 / export@titgemeyer.com

10 SIDELINE Installation instructions Protective Side guard for vehicles of the classes N, N3, O3 and O Instructions of installation according to the recommendations 89/97 EWG and 3c StVZO With effect from 0/0/9 all first registrated vehicles and up to 0/0/9 at latest all vehicles to be conducted in the traffic of the above vehicle classes have to be equipped with protective side guard. Special approvals may be given for: Semitrailer trucks, trucks for the transport of long, indecomposable goods (for example timber trucks and special trucks, concrete trucks), as well as vehicles which a protective Side guard cannot be built on for practical reasons. The protective Side guard may consist of a continuous, plane surface, plank profiles or a combination of the two. The external surfaces have to be even, stable on the most essential parts, firmly installed at the vehicle and consist of metal or other appropriate material. Under usual conditions vibration etc. should not influence the well-seating of the protective side moulding on the vehicle. Add-on parts of the vehicle like fuel and air tanks and tool cases can be integrated as part of the protective Side guard provided their dimensions and characteristics comply with a.m. recommandations. It is not allowed to fix brake, air and hydraulic lines on the protective Side guard. 7. The surface of the deflector profiles must principally be even, but they may have for example reinforcing flanges and be interrupted by fasteners like screws or rivets which should not jut out more than 0 mm. 8. If the protective Side guard consists of more than one longitudinal profiles, there should not be more than 5 mm space between these elements. Overlappings, if necessary, should be made in driving direction. 9. Any elements of the protective Side guard directing to the outside have to be smoothed-off by at least R,5. 0. The protective Side guard may consist of several deflector profiles mounted one below the other. Following minimum heights are required for the different vehicle classes: N and O3: 50 mm N3 and O: 00 mm.. The deflector profiles have to be fixed well-seated. Hinged or detachable elements are allowed as far as they meet the requirements of stability.. The protective Side guard guarantees a max. deflexion of 50 mm at a test load of 000 N. On the last 50 mm the deflection should be less than 30 mm. The test load has to be applied by a stamp of 0 to 30 mm diameter. The installation should meet following requirements:. The protective Side guard must not pass over the outline of a vehicle.. The distance of the lower flange of the deflector elements to the road surface should be max. 550 mm. 3. The s.g.f. being installed inside of the outline of the vehicle, the distance between the surface of the deflector profile and the outline of the vehicle must not exceed 0 mm.. The protective Side guard extends over the area between the front and the rear axle of a vehicle. It begins mm behind the front tyre profile and ends mm in front of the rear tyre profile. 5. If the distance of 300 mm to the front tyre profile incorporates a part of the driver s cabin, the corner profile should begin directly behind it. Only for tilt or elastic mounted cabins an additional space of 00 mm is allowed. If the width of the driver s cabin exceeds the outline of the superstructure resp. the surface of the protective side moulding, the protective Side guard should be directed to the inside in an angle of If the corner profile begins at a position which would usually be open space and if the protective Side guard consists of more than one profiles, they have to be closed in the front area by vertical profiles of at least 00 mm thickness to the inside. L Telephone: +9 (0)5 /58-0 Telefax: +9 (0)5 / export@titgemeyer.com Gruppe G(0609)

11 L SIDELINE Installation instructions Haubenhalter Instructions for the installation of the protective side guard on vehicle classes O3 and O (trailers and semi trailers of more than 3,5 t up to 0 t gross weight rating or of more than 0 t gross weight rating). max. 50 max max. 700 max. 750* *max. 375 mm (VA-stainless steel)! Instructions for the installation of the protective Side guard on vehicle classes O3 and O (trailers and saddle trailers of more than 3,5 t up to 0 t gross weight rating or of more than 0 t gross weight rating). max. 500 Instructions for the installation of the protective Side guard on vehicle classes N (trucks of more than 3,5 t up to t gross weight rating) and N3 (more than t gross weight rating). max. 350 max. 00 max. 550 Gruppe G(0609) L Telephone: +9 (0)5 /58-0 Telefax: +9 (0)5 / export@titgemeyer.com

12 TITGEMEYER (UK) Ltd A Link One Industrial Park George Henry Road Tipton, West Midlands, DY 7U Tel Fax sales@titgemeyer.co.uk