ALLIANCE LED LIGHTING

Transcription

1 ALLIANCE LED LIGHTING Original unique product design Used in harsh industries including transport, 4x4, marine trailer and Australian defence forces Quality LEDs and associated components Products manufactured to exceed ADR/ECE standards IP67 tested on all automotive applications Alliance Truck Parts BETTER PARTS. GOOD PRICES AllianceTruckParts.com.au

2 Q ABP 58RM - Marker Lamp New lens design Low profile Clip in replaceable lens Function Rear end outline marker Size 58mm x 35mm x 21mm LED Qty 2 Cable 40cm 0.12A 0.04A ADR Rear end 49/ mm 21mm 35mm Q ABP 58RM 28.50mm Horizontally mount bracket onto flat surface with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

3 Q ABP 58AM - Marker Lamp New lens design Low profile Clip in replaceable lens Function Side direction indicator Size 58mm x 35mm x 21mm LED Qty 2 Cable 40cm 0.10A 0.04A ADR Marker 6/00/ mm 21mm 35mm Q ABP 58AM 28.50mm Horizontally mount bracket onto flat surface with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

4 Q ABP 58WM - Marker Lamp New lens design Low profile Clip in replaceable lens Function Front end outline marker Size 58mm x 35mm x 21mm LED Qty 2 Cable 40cm 0.05A 0.03A ADR Front 49/ mm 21mm 35mm Q ABP 58WM 28.50mm Horizontally mount bracket onto flat surface with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

5 Q ABP 58ARM - Marker Lamp New lens design Low profile Clip in replaceable lens Function Side marker Size 58mm x 35mm x 21mm LED Qty 2 Cable 40cm 0.10A 0.04A ADR Side 45/ mm 21mm 35mm Q ABP 58ARM 28.50mm Horizontally mount bracket onto flat surface with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

6 Q ABP 7030R - Red Reflex Reflector High quality 3m tape Premium quality products Function Size Reflex reflector 70mm x 30mm x 6mm ADR Red 47/ mm 30mm Q ABP Blister Twin 6mm Remove tape backing and place onto flat surface, apply firm hand pressure to ensure adhesion. Please refer to ADR 13/00 for mounting instructions.

7 Q ABP 7030A - Amber Reflex Reflector High quality 3m tape Premium quality products Function Size Reflex reflector 70mm x 30mm x 6mm ADR Amber 47/ mm 30mm Q ABP 7030A - Blister Twin 6mm Remove tape backing and place onto flat surface, apply firm hand pressure to ensure adhesion. Please refer to ADR 13/00 for mounting instructions.

8 Q ABP 7030W - White Reflex Reflector High quality 3m tape Premium quality products Function Size Reflex reflector 70mm x 30mm x 6mm ADR White 47/ mm 30mm Q ABP 7030W - Blister Twin 6mm Remove tape backing and place onto flat surface, apply firm hand pressure to ensure adhesion. Please refer to ADR 13/00 for mounting instructions.

9 12 Volt Q ABP LR12/2-12 Volt Load Resistor Designed for late model vehicles that display light failure warning Draws the same current as a 21 watt globe Dummy load resistors designed to draw the same current as a 21 watt globe. They can be used on vehicles that have electronic components that are not LED compatible. The Resistor should ALWAYS be wired between the input wires of the lamp, NOT the chassis of the vehicle or trailer! If fitted to the Chassis, a bad earth connection is possible, and can result in problems with the lighting system of the vehicle! Indicator Circuit: If fitting to the indicator circuit, fit one lead of the resistor to the positive supply side (Yellow wire) and the other lead of the resistor to the negative supply or ground input wire (White). Brake Circuit: If fitting to the brake circuit, fit one lead of the resistor to the positive supply side (Red Wire) and the other lead of the resistor to the negative supply or ground input wire (White) Correct Fitting: To fit the resistor, use the crimp terminals supplied. Cut the loom and re-connect the cut wires within the supplied crimp terminal with one side of the resistor crimped into that terminal. Repeat the process for the remaining wire and the other end of the resistor. Use the 2 screw down points on the resistor to secure it to a metal chassis. Important Notice: Must be mounted on metal surfaces, the resistor can reach up to 170 deg C, do not mount the resistor on any surface that can be melted by the heat of the resistor, this includes plastics, hoses or painted surfaces. Q ABP LR12/2-12 Volt, Blister twin pack, 50 watt 6Ω ohms

10 24 Volt Q ABP LR24/2-24 Volt Load Resistor Designed for late model vehicles that display light failure warning Draws the same current as a 21 watt globe Dummy load resistors designed to draw the same current as a 21 watt globe. They can be used on vehicles that have electronic components that are not LED compatible. The Resistor should ALWAYS be wired between the input wires of the lamp, NOT the chassis of the vehicle or trailer! If fitted to the Chassis, a bad earth connection is possible, and can result in problems with the lighting system of the vehicle! Indicator Circuit: If fitting to the indicator circuit, fit one lead of the resistor to the positive supply side (Yellow wire) and the other lead of the resistor to the negative supply or ground input wire (White). Brake Circuit: If fitting to the brake circuit, fit one lead of the resistor to the positive supply side (Red Wire) and the other lead of the resistor to the negative supply or ground input wire (White) Correct Fitting: To fit the resistor, use the crimp terminals supplied. Cut the loom and re-connect the cut wires within the supplied crimp terminal with one side of the resistor crimped into that terminal. Repeat the process for the remaining wire and the other end of the resistor. Use the 2 screw down points on the resistor to secure it to a metal chassis. Important Notice: Must be mounted on metal surfaces, the resistor can reach up to 170 deg C, do not mount the resistor on any surface that can be melted by the heat of the resistor, this includes plastics, hoses or painted surfaces. Q ABP LR24/2-24 Volt, Blister twin pack, 50 watt 24Ω ohms

11 Q ABP 35BLM - Licence Plate Lamp Original Design IP67 Dust & Function Licence plate lamp Size 76mm x 42mm x 30mm LED Qty 4 Cable 40cm Cable Draw 0.04A ADR Licence 48/ mm Q ABP 35BLM 42mm 30mm Fit onto flat surface, 25mm from top centre, long edge of licence plate with lens facing towards the ground. Refer to ADR 13/00 for. 64mm

12 Q ABP 130RMG - Medium Vehicle/Trailer Lamp Designed with rear reflector Includes grommet and plug Horizontal or vertical mount Function Stop/tail with reflector Size 134mm x 86mm x 16mm LED Qty 14 Cable Includes Draw Stop 0.23A 0.12A 0.04A ADR Stop/Tail 49/ ADR Reflector 47/ mm GROMMET Q ABP 130RMG 139mm 160mm 113mm Retro fit lamps. If new installation, fit grommet or flange into cutout (cut out 139 x 91mm), plug wire into lamp and run through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions. 91mm

13 Q ABP 130AMG - Medium Vehicle/Trailer Lamp Designed with rear reflector Includes grommet and plug Horizontal or vertical mount Function Rear indicator Size 134mm x 86mm x 16mm LED Qty 14 Cable Includes Draw 0.14A ADR Indicator 6/00/2A mm GROMMET Q ABP 130AMG 139mm 160mm 113mm Retro fit lamps. If new installation, fit grommet or flange into cutout (cut out 139 x 91mm), plug wire into lamp and run through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions. 91mm

14 Q ABP 130WMG - Medium Vehicle/Trailer Lamp Designed with rear reflector Includes grommet and plug Horizontal or vertical mount Function Reverse Size 134mm x 86mm x 16mm LED Qty 32 Cable Includes Draw 0.08A ADR Reverse 1/ mm GROMMET Q ABP 130WMG 139mm 160mm 113mm Retro fit lamps. If new installation, fit grommet or flange into cutout (cut out 139 x 91mm), plug wire into lamp and run through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions. 91mm

15 Q ABP 275ARM - Small Vehicle/Trailer Lamp Inbuilt reflectors Diamond lens pattern Function Stop/Tail/Indicator/Reflector Size 275mm x 100mm x 22mm LED Qty 16 Cable 30cm cable with plug Draw Stop Tail 0.14A 0.07A 0.11A 0.05A 0.12A ADR Stop/Tail 49/ ADR Indicator 6/00/2A ADR Reflector 47/ mm 100mm Licence plate lamp input Q ABP 275ARM 275mm 115mm 22mm Horizontally mount onto flat surface with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

16 Q ABP 280ARRM - Small Vehicle/Trailer Lamp New design mini jumbo Includes red reflector* Function Stop/Tail/Indicator Size 282mm x 95mm x 28mm LED Qty 36 Cable 1.2m Draw Stop Tail 0.30A 0.40A 0.22A 0.06A 0.11A ADR Stop/Tail 49/ ADR Indicator 6/00/2A mm 95mm Q ABP 280ARRM 116mm 28mm Surface mount onto flat surface horizontally with stainless steel bolts provided in assembly and run cable through 12mm hole. Please refer to ADR 13/00. * Included in blister packaging

17 Q ABP 280ARRM - Small Vehicle/Trailer Lamp New design mini jumbo Includes red reflector* Function Stop/Tail/Indicator/Reverse Size 282mm x 95mm x 28mm LED Qty 36 Cable 1.2m Draw Stop Tail Indicator 0.15A 0.02A 0.14A 0.11A 0.03A 0.11A 0.13A ADR Stop/Tail 49/ ADR Indicator 6/00/2A ADR Reverse 1/ mm 95mm Q ABP 280ARWM 116mm 28mm Surface mount onto flat surface horizontally with stainless steel bolts provided in assembly and run cable through 12mm hole. Please refer to ADR 13/00. * Included in blister packaging

18 ECE/ADR Q ABP 460ARRM - Medium Vehicle/Trailer Lamp New mid sized Jumbo Function Stop/Tail/Indicator/Reflector Size 460mm x 130mm x 33mm LED Qty 48 Cable 1.2m Draw Stop Tail 0.30A 0.02A 0.17A 0.04A 0.18A ECE Stop/Tail 02 R1-S ECE Indicator 01 2a 6205 ECE Reflector 02 1A mm 130mm Q ABP 460ARRM 33mm 280mm Horizontally or vertically mount onto flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

19 ECE/ADR Q ABP 460ARWM - Medium Vehicle/Trailer Lamp New mid sized Jumbo Function Stop/Tail/Indicator/ Reverse/Reflector Size 460mm x 130mm x 33mm LED Qty 48 Cable 1.2m Draw Stop Tail Ind 0.30A 0.02A 0.32A 0.17A 0.04A 0.18A 0.12A ECE Stop/Tail 02 R1-S ECE Indicator 01 2a 6205 ECE Reverse 00 AR 1208 ECE Reflector 02 1A mm 130mm Q ABP 460ARRM 33mm 280mm Horizontally or vertically mount onto flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

20 Q ABP J3BARRM - Large Vehicle/Trailer Lamp Australia s popular jumbo style Function Stop/Tail/Indicator/ Reflector Size 595mm x 130mm x 45mm LED Qty 72 Cable 1.2 meter cable Draw Stop Tail 0.47A 0.04A 0.27A 0.03A 0.28A ADR Stop/Tail 49/ ADR Indicator 6/00/2A ADR Reflector 47/ mm 130mm Q ABP J3BARRM 45mm 500mm Horizontally or vertically mount using bolts in back of lamp, run wires through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

21 Q ABP J3BARWM - Small Vehicle/Trailer Lamp Australia s popular jumbo style Function Stop/Tail/Indicator/ Reverse/Reflector Size 595mm x 130mm x 45mm LED Qty 72 Cable 1.2 meter cable Draw Stop Tail Ind 0.47A 0.04A 0.42A 0.27A 0.03A 0.28A 0.11A ADR Stop/Tail 49/ ADR Indicator 6/00/2A ADR Reverse 1/ ADR Reflector 47/ mm 130mm Q ABP J3BARWM 45mm 500mm Horizontally or vertically mount using bolts in back of lamp, run wires through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

22 Q ABP LRB145 - Beacon Rotating Pattern IP67 Dust & Intense 360 Visibility Function Rotating effect medium amber beacon Size 144mm round x 96mm Voltage Multivolt 10-30V LED Qty 24 Cable 40cm cable Draw 0.22A Approvals Function Category SAE Beacon SAE J845 Class 2 96mm Q ABP LRB V, Blister single 144mm Run wires through hole in fixing surface or from the side of the base. Attach with screws provided, ensure foam gasket is between lamp and fixing surface.

23 Q ABP 11618FBM Work Lamp High light output Flood Beam IP67 Dust & Function 18 watt Flood Lamp Size 115mm x 137mm x 40mm Voltage Multivolt 9-32V LED Qty 6 x 3 watt Lumen Raw 1500/Effective 1377 Lux@2m 410 Cable 25cm cable 0.48A Lens Polycarbonate Base Die Cast Alloy 115mm 40mm 137mm Q ABP 11618FBM 25m 15m 5m 0m 5m 15m 25m 5m 25m 50m 100m 150m 25.63lx 1.6lx 0.62lx 0.16lx Fix to mounting surface using stainless steel bolts and adjustable stainless steel bracket supplied.

24 Q ABP 11518FBM Work Lamp High light output Flood Beam Function 18 watt Flood Lamp Size 110mm x 137mm x 40mm Voltage Multivolt 9-32V LED Qty 6 x 3 watt Lumen Raw 1500/Effective 1377 Lux@2m 410 Cable 25cm cable 0.48A Lens Polycarbonate Base Die Cast Alloy 110mm 40mm 128mm 137mm Q ABP 11518FBM 25m 15m 5m 0m 5m 15m 25m 5m 25m 50m 100m 150m 25.63lx 1.6lx 0.62lx 0.16lx Fix to mounting surface using stainless steel bolts and adjustable stainless steel bracket supplied.