LED LIGHTING PARTS GUIDE

Transcription

1 LED LIGHTING PARTS GUIDE ADR Better Parts. Good Prices. Alliance Truck Parts. LED LIGHTING PARTS GUIDE Page 1

2 Alliance LED Lighting A range of high performance, reliable LED lighting products made to suit small, medium and large vehicle and trailers. Each product has been specially designed to suit harsh Australian road environments to create a reliable products at a competitive price, perfect to enable you to hit the road with confidence. Original unique product design Used in harsh industries including transport, 4x4, marine trailer and Australian defence forces Quality LEDs and associated components Products manufactured to exceed ADR/ECE standards IP67 dust and waterproof on all external automotive applications Available Range Description Page Number Q ABP 58RM 10-30V rear marker lamp 4 Q ABP 58AM 10-30V side marker lamp 5 Q ABP 58WM 10-30V front marker lamp 6 Q ABP 58ARM 10-30V side marker lamp 7 Q ABP 280ARRM Stop/Tail/Ind 8 Q ABP 280ARWM 280 Stop/Tail/Ind/Rev 9 Q ABP 275ARM 12-24V Stop/Tail/Ind lamp 10 Q ABP 130RMG 12/24V Stop/Tail/Ind lamp 11 Q ABP 130AMG 12/24V Ind lamp 12 Q ABP 130WMG 12/24V Rev lamp 13 Q ABP 460ARRM 12-24V Stop/Tail/Ind 14 Q ABP 460ARWM 12-24V Stop/Tail/Ind/Rev 15 Q ABP J3BARRM Jumbo Stop/Tail/Ind 16 Q ABP J3BARWM Jumbo Stop/Tail/Ind/Rev 17 Q ABP 35BLM License plate lamp 18 Q ABP 7030R Red reflectors (2pk) 19 Q ABP 7030A Amber reflectors (2pk) 20 Q ABP 7030W White reflectors (2pk) 21 Q ABP 11518FBM 18W square flood beam 22 Q ABP 11618FBM 18W round flood beam 23 Q ABP LR12/2 12V load resistor (2pk) 24 Q ABP LR24/2 24V load resistor (2pk) 25 Q ABP LRB145 LED rotating beacon 26 Warranty Alliance Truck Parts are backed by a 1-year/unlimited kilometre standard warranty. Illustrations and photographs used in this catalogue may vary slightly from the actual product. Prototype samples are sometimes used for photography. The production parts may vary slightly. Availability of products shown in this catalogue is subject to change without notice.

3 Original unique product design Used in harsh industries including transport, 4x4, marine trailer and Australian defence forces Quality LEDs and associated components Products manufactured to exceed ADR/ECE standards IP67 tested on all automotive applications ADR Page 3

4 Q ABP 58RM - Marker Lamp ADR New lens design Low profile Clip in replaceable lens 58mm 21mm 35mm Function Rear end outline marker Size 58mm x 35mm x 21mm LED Qty 2 Cable 40cm 0.12A 0.04A ADR Rear end 49/ mm Horizontally mount bracket onto flat surface with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions. Q ABP 58RM - Blister Single Page 4

5 ADR Q ABP 58AM - Marker Lamp New lens design Low profile Clip in replaceable lens 58mm 21mm 35mm Function Side direction indicator Size 58mm x 35mm x 21mm LED Qty 2 Cable 40cm 0.10A 0.04A ADR Marker 6/00/ mm Horizontally mount bracket onto flat surface with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions. Q ABP 58AM - Blister Single Page 5

6 ADR Q ABP 58WM - Marker Lamp New lens design Low profile Clip in replaceable lens 58mm 21mm 35mm Function Front end outline marker Size 58mm x 35mm x 21mm LED Qty 2 Cable 40cm 0.05A 0.03A ADR Front 49/ mm Horizontally mount bracket onto flat surface with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions. Q ABP 58WM - Blister Single Page 6

7 ADR Q ABP 58ARM - Marker Lamp New lens design Low profile Clip in replaceable lens 58mm 21mm 35mm Function Side marker Size 58mm x 35mm x 21mm LED Qty 2 Cable 40cm 0.10A 0.04A ADR Side 45/ mm Horizontally mount bracket onto flat surface with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions. Q ABP 58ARM - Blister Single Page 7

8 ECE/ADR Q ABP 280ARRM - Small Vehicle/Trailer Lamp New design mini jumbo Includes red reflector* 282mm 95mm Function Stop/Tail/Indicator Size 282mm x 95mm x 28mm LED Qty 36 Cable 1.2m 116mm 28mm Draw Stop Tail 0.30A 0.40A 0.22A 0.06A 0.11A ADR Stop/Tail 49/ ADR Indicator 6/00/2A * Included in blister packaging Surface mount onto flat surface horizontally with stainless steel bolts provided in assembly and run cable through 12mm hole. Please refer to ADR 13/00. Q ABP 280ARRM - Blister Single Page 8

9 ECE/ADR Q ABP 280ARWM - Small Vehicle/Trailer Lamp New design mini jumbo Includes red reflector* 282mm 95mm Function Stop/Tail/Indicator/Reverse Size 282mm x 95mm x 28mm LED Qty 36 Cable 1.2m Draw Stop Tail Indicator 0.15A 0.02A 0.14A 0.11A 0.03A 0.11A 0.13A 116mm * Included in blister packaging 28mm ADR Stop/Tail 49/ ADR Indicator 6/00/2A ADR Reverse 1/ Surface mount onto flat surface horizontally with stainless steel bolts provided in assembly and run cable through 12mm hole. Please refer to ADR 13/00. Q ABP 280ARWM - Blister Single Page 9

10 ADR Q ABP 275ARM - Small Vehicle/Trailer Lamp Inbuilt reflectors Diamond lens pattern 115mm 100mm Licence plate lamp input Function Stop/Tail/Indicator/Reflector Size 275mm x 100mm x 22mm LED Qty 16 Cable 30cm cable with plug Draw Stop Tail 0.14A 0.07A 0.11A 0.05A 0.12A 275mm 115mm 22mm ADR Stop/Tail 49/ ADR Indicator 6/00/2A ADR Reflector 47/ Horizontally mount onto flat surface with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions. Q ABP 275ARM - Blister Single Page 10

11 ADR Q ABP 130RMG - Medium Vehicle/Trailer Lamp Designed with rear reflector Includes grommet and plug Horizontal or vertical mount 24mm GROMMET 139mm 160mm Function Stop/tail with reflector Size 134mm x 86mm x 16mm LED Qty 14 Cable Includes Draw Stop 0.23A 0.12A 0.04A ADR Stop/Tail 49/ ADR Reflector 47/ mm 91mm Retro fit lamps. If new installation, fit grommet or flange into cutout (cut out 139 x 91mm), plug wire into lamp and run through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions. Q ABP 130RMG - Blister Single Page 11

12 ADR Q ABP 130AMG - Medium Vehicle/Trailer Lamp Includes grommet and plug Horizontal or vertical mount 24mm GROMMET 139mm 160mm Function Rear indicator Size 134mm x 86mm x 16mm LED Qty 14 Cable Includes Draw 0.14A ADR Indicator 6/00/2A mm 91mm Retro fit lamps. If new installation, fit grommet or flange into cutout (cut out 139 x 91mm), plug wire into lamp and run through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions. Q ABP 130AMG - Blister Single Page 12

13 ADR Q ABP 130WMG - Medium Vehicle/Trailer Lamp Includes grommet and plug Horizontal or vertical mount 24mm GROMMET 139mm 160mm Function Reverse Size 134mm x 86mm x 16mm LED Qty 32 Cable Includes Draw 0.08A ADR Reverse 1/ mm 91mm Retro fit lamps. If new installation, fit grommet or flange into cutout (cut out 139 x 91mm), plug wire into lamp and run through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions. Q ABP 130WMG - Blister Single Page 13

14 ECE/ADR Q ABP 460ARRM - Medium Vehicle/Trailer Lamp New mid sized Jumbo 460mm Function Stop/Tail/Indicator/Reflector Size 460mm x 130mm x 33mm LED Qty 48 Cable 1.2m 130mm 33mm Draw Stop Tail 0.30A 0.02A 0.17A 0.04A 0.18A ECE Stop/Tail 02 R1-S ECE Indicator 01 2a 6205 ECE Reflector 02 1A mm Horizontally or vertically mount onto flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions. Q ABP 460ARRM - Blister Single Page 14

15 Q ABP 460ARWM - Medium Vehicle/Trailer Lamp ECE/ADR New mid sized Jumbo Function Stop/Tail/Indicator/ Reverse/Reflector Size 460mm x 130mm x 33mm LED Qty 48 Cable 1.2m Draw Stop Tail Ind 0.30A 0.02A 0.32A 0.17A 0.04A 0.18A 0.12A ECE Stop/Tail 02 R1-S ECE Indicator 01 2a 6205 ECE Reverse 00 AR 1208 ECE Reflector 02 1A mm 280mm 130mm Horizontally or vertically mount onto flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions. 33mm Q ABP 460ARWM - Blister Single Page 15

16 Q ABP J3BARRM - Large Vehicle/Trailer Lamp ADR Australia s popular jumbo style 595mm Function Stop/Tail/Indicator/ Reflector Size 595mm x 130mm x 45mm LED Qty 72 Cable 1.2 meter cable 130mm 45mm Draw Stop Tail 0.47A 0.04A 0.27A 0.03A 0.28A ADR Stop/Tail 49/ ADR Indicator 6/00/2A ADR Reflector 47/ mm Horizontally or vertically mount using bolts in back of lamp, run wires through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions. Q ABP J3BARRM - Blister Single Page 16

17 Q ABP J3BARWM - Large Vehicle/Trailer Lamp ADR Australia s popular jumbo style 595mm Function Stop/Tail/Indicator/ Reverse/Reflector Size 595mm x 130mm x 45mm LED Qty 72 Cable 1.2 meter cable 130mm 45mm Draw Stop Tail Ind 0.47A 0.04A 0.42A 0.27A 0.03A 0.28A 0.11A ADR Stop/Tail 49/ ADR Indicator 6/00/2A ADR Reverse 1/ ADR Reflector 47/ mm Horizontally or vertically mount using bolts in back of lamp, run wires through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions. Q ABP J3BARWM - Blister Single Page 17

18 Q ABP 35BLM - Licence Plate Lamp ADR Original Design IP67 Dust & 76mm 42mm Function Licence plate lamp Size 76mm x 42mm x 30mm LED Qty 4 Cable 40cm Cable Draw 0.04A ADR Licence 48/ mm 30mm Fit onto flat surface, 25mm from top centre, long edge of licence plate with lens facing towards the ground. Refer to ADR 13/00 for. Q ABP 35BLM - Blister Single Page 18

19 ADR Q ABP 7030R - Red Reflex Reflector High quality 3m tape Premium quality products 70mm 30mm 6mm Function Size Reflex reflector 70mm x 30mm x 6mm ADR Red 47/ Remove tape backing and place onto flat surface, apply firm hand pressure to ensure adhesion. Please refer to ADR 13/00 for mounting instructions. Q ABP 7030R - Blister Twin Page 19

20 ADR Q ABP 7030A - Amber Reflex Reflector High quality 3m tape Premium quality products 70mm 30mm 6mm Function Size Reflex reflector 70mm x 30mm x 6mm ADR Amber 47/ Remove tape backing and place onto flat surface, apply firm hand pressure to ensure adhesion. Please refer to ADR 13/00 for mounting instructions. Q ABP 7030A - Blister Twin Page 20

21 ADR Q ABP 7030W - White Reflex Reflector High quality 3m tape Premium quality products 70mm 30mm 6mm Function Size Reflex reflector 70mm x 30mm x 6mm ADR White 47/ Remove tape backing and place onto flat surface, apply firm hand pressure to ensure adhesion. Please refer to ADR 13/00 for mounting instructions. Q ABP 7030W - Blister Twin Page 21

22 Q ABP 11518FBM Work Lamp High light output Flood Beam IP67 Dust & 110mm 40mm Function 18 watt Flood Lamp Size 110mm x 137mm x 40mm Voltage Multivolt 9-32V LED Qty 6 x 3 watt Lumen Raw 1500/Effective 1377 Lux@2m 410 Cable 25cm cable 0.48A Lens Polycarbonate Base Die Cast Alloy 128mm 137mm Fix to mounting surface using stainless steel bolts and adjustable stainless steel bracket supplied. 5m 25m 50m 100m 150m 25m 15m 5m 0m 5m 25.63lx 1.6lx 0.62lx 0.16lx 15m 25m Q ABP 11518FBM - Blister Single Page 22

23 Q ABP 11618FBM Work Lamp High light output Flood Beam IP67 Dust & 115mm 40mm Function 18 watt Flood Lamp Size 115mm x 137mm x 40mm Voltage Multivolt 9-32V LED Qty 6 x 3 watt Lumen Raw 1500/Effective 1377 Lux@2m 410 Cable 25cm cable 0.48A Lens Polycarbonate Base Die Cast Alloy 137mm Fix to mounting surface using stainless steel bolts and adjustable stainless steel bracket supplied. 5m 25m 50m 100m 150m 25m 15m 5m 0m 5m 25.63lx 1.6lx 0.62lx 0.16lx 15m 25m Q ABP 11618FBM - Blister Single Page 23

24 Q ABP LR12/2-12 Volt Load Resistor 12 Volt Only Designed for late model vehicles that display light failure warning Draws the same current as a 21 watt globe Dummy load resistors designed to draw the same current as a 21 watt globe. They can be used on vehicles that have electronic components that are not LED compatible. The Resistor should ALWAYS be wired between the input wires of the lamp, NOT the chassis of the vehicle or trailer! If fitted to the Chassis, a bad earth connection is possible, and can result in problems with the lighting system of the vehicle! Indicator Circuit: If fitting to the indicator circuit, fit one lead of the resistor to the positive supply side (Yellow wire) and the other lead of the resistor to the negative supply or ground input wire (White). Brake Circuit: If fitting to the brake circuit, fit one lead of the resistor to the positive supply side (Red Wire) and the other lead of the resistor to the negative supply or ground input wire (White) Correct Fitting: To fit the resistor, use the crimp terminals supplied. Cut the loom and re-connect the cut wires within the supplied crimp terminal with one side of the resistor crimped into that terminal. Repeat the process for the remaining wire and the other end of the resistor. Use the 2 screw down points on the resistor to secure it to a metal chassis. Important Notice: Must be mounted on metal surfaces, the resistor can reach up to 170 deg C, do not mount the resistor on any surface that can be melted by the heat of the resistor, this includes plastics, hoses or painted surfaces. Q ABP LR12/2-12 Volt, Blister twin pack, 50 watt 6Ω ohms Page 24

25 Q ABP LR24/2-24 Volt Load Resistor 24 Volt Only Designed for late model vehicles that display light failure warning Draws the same current as a 21 watt globe Dummy load resistors designed to draw the same current as a 21 watt globe. They can be used on vehicles that have electronic components that are not LED compatible. The Resistor should ALWAYS be wired between the input wires of the lamp, NOT the chassis of the vehicle or trailer! If fitted to the Chassis, a bad earth connection is possible, and can result in problems with the lighting system of the vehicle! Indicator Circuit: If fitting to the indicator circuit, fit one lead of the resistor to the positive supply side (Yellow wire) and the other lead of the resistor to the negative supply or ground input wire (White). Brake Circuit: If fitting to the brake circuit, fit one lead of the resistor to the positive supply side (Red Wire) and the other lead of the resistor to the negative supply or ground input wire (White) Correct Fitting: To fit the resistor, use the crimp terminals supplied. Cut the loom and re-connect the cut wires within the supplied crimp terminal with one side of the resistor crimped into that terminal. Repeat the process for the remaining wire and the other end of the resistor. Use the 2 screw down points on the resistor to secure it to a metal chassis. Important Notice: Must be mounted on metal surfaces, the resistor can reach up to 170 deg C, do not mount the resistor on any surface that can be melted by the heat of the resistor, this includes plastics, hoses or painted surfaces. Q ABP LR24/2-24 Volt, Blister twin pack, 50 watt 24Ω ohms Page 25

26 Q ABP LRB145 - Beacon SAE/J845 Class 2 ECE Rotating Pattern IP67 Dust & Intense 360 Visibility 96mm Function Rotating effect medium amber beacon Size 144mm round x 96mm Voltage Multivolt 10-30V LED Qty 24 Cable 40cm cable Draw 0.22A Approvals Function Category SAE Beacon SAE J845 Class 2 144mm Run wires through hole in fixing surface or from the side of the base. Attach with screws provided, ensure foam gasket is between lamp and fixing surface. Q ABP LRB V, Blister single Page 26

27 Alliance LED Lighting In-store Display Metal Display Stand Not Included Speak to your dealer about Alliance Truck Parts. Page 27

28 Speak to your dealer about Alliance Truck Parts. Illustrations and photographs used in this catalogue may vary slightly from the actual product. Prototype samples are sometimes used for photography. The production parts may vary slightly. Availability of products shown in this catalogue is subject to change without notice.